Strain Response of the Anterior Cruciate Ligament to Uniplanar and Multiplanar Loads During Simulated Landings: Implications for Injury Mechanism

Maturation and biomechanical risk factors associated with anterior cruciate ligament injury: Is there a link? A systematic review

OBJECTIVE

To establish the potential link between sex-specific maturation and biomechanical factors associated with ACL injury during dynamic tasks.

DESIGN

Systematic review.

LITERATURE SEARCH

Five databases (CINHAL®, Cochrane Library, PubMed®, Scopus®, and SPORTDiscus) were searched and monitored until 27 May 2024.

STUDY SELECTION CRITERIA

Cross-sectional, cohort, case-control, or interventional studies reporting one or more biomechanical variable linked with ACL injury and which assessed participants across two or more maturation phases were considered eligible.

DATA SYNTHESIS

Studies were assessed for risk of bias using a modified version of the Newcastle Ottawa Scale and overall quality of evidence was rated using GRADE. Metrics and effect sizes were presented where available.

RESULTS

Eighteen included studies examined 400 males, 1377 females, and 315 participants of undefined sex across various maturation phases. The methodological quality of most studies (n = 16) was considered good, and satisfactory for two. Knee abduction angle, knee abduction moment, knee flexion angle, and ground reaction forces were most commonly reported. Knee abduction angles and moments and knee flexion angles were greater in late and post-pubertal females than males and pre-pubertal females during both landing and cutting tasks. When normalised for body mass, ground reaction forces were generally greater in males compared to females overall and for less mature participants for both sexes. Overall quality of evidence was low or medium across the four biomechanical measures.

CONCLUSION

Sex-specific maturation considerations are important in the targeted development and implementation of ACL injury risk identification and prevention strategies.

Lack of Proprioceptive Strategy Modulation Leads to At-Risk Biomechanics for Anterior Cruciate Ligament in Healthy Athletes

INTRODUCTION

Anterior cruciate ligament (ACL) injuries are frequent in handball, and altered sensory integration may contribute to increased injury risk. Recent evidence showed that proprioceptive postural control strategies differ among athletes. The aim of this study was to evaluate the relationship between proprioceptive strategy and biomechanics during side-cutting maneuvers.

METHODS

A total of 47 handball players performed anticipated and unanticipated cutting tasks. Their postural proprioceptive strategy was then characterized according to the perturbation of the center of pressure displacement generated by the muscle vibration on a firm and foam surface. Individuals able to reweight proprioception from ankle to lumbar signals according to the stability of the support were defined as flexible. Conversely, athletes maintaining an ankle-steered strategy on foam surface were characterized as rigid. Statistical parametric mapping analysis was used to compare pelvic and lower limb side-cutting kinematics, kinetics, and EMG activity from seven muscles 200 ms before and after initial contact (IC) using a two-way ANOVA (group-condition).

RESULTS

Twenty athletes (11 females and 9 males, 18.5 yr) were characterized as flexible and 20 athletes (12 females and 8 males, 18.9 yr) as rigid. No interaction between condition and proprioceptive profile was observed. More ipsilateral pelvic tilt before IC and lower vastus lateralis (VL) activity immediately after IC was observed during CUT ant . When comparing proprioceptive strategy, rigid individuals exhibited less preactivity of the semitendinosus ( P < 0.001) and higher VL activity ( P = 0.032). Conversely, rigid showed higher gluteus medius preactivity ( P < 0.05) and higher VL activity 100 ms after IC ( P < 0.001). Ankle was also more internally rotated before and during the stance phase ( P < 0.05) among rigid athletes.

CONCLUSIONS

Rigid handball players exhibited at-risk determinants for anterior cruciate ligament injuries during side-cutting maneuvers.

Larger hip external rotation motion is associated with larger knee abduction and internal rotation motions during a drop vertical jump

Associations among hip motions, knee abduction and internal rotation motion during a drop vertical jump (DVJ), which increases the risk of anterior cruciate ligament injury, remain unclear. The purpose of this study was to examine associations among knee abduction, internal rotation and hip joint motions during a DVJ. Fifty-seven young female participants performed a DVJ from a 30-cm height. Hip and knee kinematics and kinetics were analysed using a three-dimensional motion analysis system and force plates. Multiple regression analysis showed that peak knee abduction angle was negatively associated with knee internal rotation and hip internal rotation excursions from initial contact (IC) to peak knee flexion, and positively associated with peak knee abduction moment (R2 = 0.465, P< 0.001). Peak knee internal rotation angle was negatively associated with the hip flexion excursion from IC to peak knee flexion and peak hip adduction moment (R2 = 0.194, P= 0.001). In addition, hip internal rotation excursion was negatively associated with knee abduction and internal rotation excursion from IC to 50 ms after IC. To avoid a large knee abduction and internal rotation motion during jump-landing training, it might be beneficial to provide landing instructions to avoid a large hip external rotation motion.

Two-to-three times increase in natural hip and lumbar non-sagittal plane kinematics can lead to anterior cruciate ligament injury and cartilage failure scenarios during single-leg landings

BACKGROUND

Analyzing sports injuries is essential to mitigate risk for injury, but inherently challenging using in vivo approaches. Computational modeling is a powerful engineering tool used to access biomechanical information on tissue failure that cannot be obtained otherwise using traditional motion capture techniques.

METHODS

We extrapolated high-risk kinematics associated with ACL strain and cartilage load and stress from a previous motion analysis of 14 uninjured participants. Computational simulations were used to induce ACL failure strain and cartilage failure load, stress, and contact pressure in two age- and BMI-matched participants, one of each biological sex, during single-leg cross drop and single-leg drop tasks. The high-risk kinematics were exaggerated in 20% intervals, within their physiological range of motion, to determine if injury occurred in the models. Where injury occurred, we reported the kinematic profiles that led to tissue failure.

FINDINGS

Our findings revealed ACL strains up to 9.99%, consistent with reported failure values in existing literature. Cartilage failure was observed in all eight analyzed conditions when increasing each high-risk kinematic parameter by 2.61 ± 0.67 times the participants' natural landing values. The kinematics associated with tissue failure included peak hip internal rotation of 22.48 ± 19.04°, peak hip abduction of 22.51 ± 9.09°, and peak lumbar rotation away from the stance limb of 11.56 ± 9.78°.

INTERPRETATION

Our results support the ability of previously reported high-risk kinematics in the literature to induce injury and add to the literature by reporting extreme motion limits leading to injurious cases. Therefore, training programs able to modify these motions during single-leg landings may reduce the risk of ACL injury and cartilage trauma.

Predicting Leg Forces and Knee Moments Using Inertial Measurement Units: An In Vitro Study

We compared the ability of seven machine learning algorithms to use wearable inertial measurement unit (IMU) data to identify the severe knee loading cycles known to induce microdamage associated with anterior cruciate ligament rupture. Sixteen cadaveric knee specimens, dissected free of skin and muscle, were mounted in a rig simulating standardized jump landings. One IMU was located above and the other below the knee, the applied three-dimensional action and reaction loads were measured via six-axis load cells, and the three-dimensional knee kinematics were also recorded by a laboratory motion capture system. Machine learning algorithms were used to predict the knee moments and the tibial and femur vertical forces; 13 knees were utilized for training each model, while three were used for testing its accuracy (i.e., normalized root-mean-square error) and reliability (Bland-Altman limits of agreement). The results showed the models predicted force and knee moment values with acceptable levels of error and, although several models exhibited some form of bias, acceptable reliability. Further research will be needed to determine whether these types of models can be modified to attenuate the inevitable in vivo soft tissue motion artifact associated with highly dynamic activities like jump landings.

The History and Future of Neuromusculoskeletal Biomechanics

The Executive Council of the International Society of Biomechanics has initiated and overseen the commemorations of the Society's 50th Anniversary in 2023. This included multiple series of lectures at the ninth World Congress of Biomechanics in 2022 and XXIXth Congress of the International Society of Biomechanics in 2023, all linked to special issues of International Society of Biomechanics' affiliated journals. This special issue of the Journal of Applied Biomechanics is dedicated to the biomechanics of the neuromusculoskeletal system. The reader is encouraged to explore this special issue which comprises 6 papers exploring the current state-of the-art, and future directions and roles for neuromusculoskeletal biomechanics. This editorial presents a very brief history of the science of the neuromusculoskeletal system's 4 main components: the central nervous system, musculotendon units, the musculoskeletal system, and joints, and how they biomechanically integrate to enable an understanding of the generation and control of human movement. This also entails a quick exploration of contemporary neuromusculoskeletal biomechanics and its future with new fields of application.

Association Between the Medial-Lateral Quadriceps and Hamstring Muscle Thickness and the Knee Kinematics and Kinetics During Single-Leg Landing

BACKGROUND

Muscle thickness can influence the joint kinematics and/or kinetics during dynamic activities. The relationship between the muscle thickness of individual quadriceps and hamstrings or medial-to-lateral thigh muscle thickness ratio and the knee kinematics/kinetics with respect to anterior cruciate ligament (ACL) injury risk remains unclear.

HYPOTHESIS

Higher medial-to-lateral thigh muscle thickness ratio would be associated with lower knee valgus angle/moment and lower tibial internal rotation angle/moment during single-leg landing.

STUDY DESIGN

Cross-sectional.

LEVEL OF EVIDENCE

Level 4.

METHODS

Muscle thickness of the vastus lateralis (VL), vastus medialis (VM), biceps femoris (BF), and semitendinosus (ST) of 30 healthy participants (16 males and 14 females) were measured using ultrasound. Knee joint kinematics and kinetics during single-leg landing were obtained. Stepwise multiple regression analysis, a follow-up Fisher's r to z test to examine the sex as a moderator, and independent t tests to evaluate sex difference were performed.

RESULTS

Both knee valgus moment (R2 = 0.466, P < 0.001) and tibial external rotation moment (R2 = 0.330, P < 0.001) at peak anterior tibial shear force during single-leg landing were negatively correlated with medial-to-lateral (ie, (VM+ST):(VL+BF)) thickness ratio regardless of sex, whereas medial-to-lateral thigh muscle thickness ratio was not correlated with knee valgus and tibial external rotation angles. Male participants exhibited higher (VM+ST):(VL+BF) thickness ratio than female participants (P = 0.005), and lower knee valgus moment (P = 0.04) and tibial external rotation moment (P = 0.05), as well.

CONCLUSION

The knee joint moments in frontal and transverse planes during single-leg landing were associated with the medial-to-lateral thigh muscle thickness ratio; thus, the medial-lateral thigh muscle thickness could be a potential contributor to frontal and transverse plane knee joint loading during dynamic movement.

CLINICAL RELEVANCE

Strength training that aims to selectively strengthen the medial/lateral thigh muscles might be considered in a new ACL injury prevention training program to alter the biomechanical parameters associated with ACL injuries.

Effect of Whole Body Parameters on Knee Joint Biomechanics: Implications for ACL Injury Prevention During Single-Leg Landings

BACKGROUND

Previous studies have examined the effect of whole body (WB) parameters on anterior cruciate ligament (ACL) strain and loads, as well as knee joint kinetics and kinematics. However, articular cartilage damage occurs in relation to ACL failure, and the effect of WB parameters on ACL strain and articular cartilage biomechanics during dynamic tasks is unclear.

PURPOSES

(1) To investigate the effect of WB parameters on ACL strain, as well as articular cartilage stress and contact force, during a single-leg cross drop (SLCD) and single-leg drop (SLD). (2) To identify WB parameters predictive of high ACL strain during these tasks.

STUDY DESIGN

Descriptive laboratory study.

METHODS

Three-dimensional motion analysis data from 14 physically active men and women were recorded during an SLCD and SLD. OpenSim was used to obtain their kinematics, kinetics, and muscle forces for the WB model. Using these data in kinetically driven finite element simulations of the knee joint produced outputs of ACL strains and articular cartilage stresses and contact forces. Spearman correlation coefficients were used to assess relationships between WB parameters and ACL strain and cartilage biomechanics. Moreover, receiver operating characteristic curve analyses and multivariate binary logistic regressions were used to find the WB parameters that could discriminate high from low ACL strain trials.

RESULTS

Correlations showed that more lumbar rotation away from the stance limb at peak ACL strain had the strongest overall association (ρ = 0.877) with peak ACL strain. Higher knee anterior shear force (ρ = 0.895) and lower gluteus maximus muscle force (ρ = 0.89) at peak ACL strain demonstrated the strongest associations with peak articular cartilage stress or contact force in ≥1 of the analyzed tasks. The regression model that used muscle forces to predict high ACL strain trials during the dominant limb SLD yielded the highest accuracy (93.5%), sensitivity (0.881), and specificity (0.952) among all regression models.

CONCLUSION

WB parameters that were most consistently associated with and predictive of high ACL strain and poor articular cartilage biomechanics during the SLCD and SLD tasks included greater knee abduction angle at initial contact and higher anterior shear force at peak ACL strain, as well as lower gracilis, gluteus maximus, and medial gastrocnemius muscle forces.

CLINICAL RELEVANCE

Knowledge of which landing postures create a high risk for ACL or cartilage injury may help reduce injuries in athletes by avoiding those postures and practicing the tasks with reduced high-risk motions, as well as by strengthening the muscles that protect the knee during single-leg landings.

Effects of gender and fatigue on strength and activity of gluteus medius muscle during a controlled cutting maneuver in preadolescent athletes

The present study aimed to investigate the effects of gender on hip muscle strength and activity during a controlled cutting maneuver in preadolescent athletes. Fifty-six football and handball preadolescent players participated (35 females and 21 males). Normalized mean activity of the gluteus medius (GM) muscle was measured using surface electromyography during cutting maneuvers in pre-activation and eccentric phases. The stance duration and the strength of hip abductors and external rotators were recorded with a force plate and a handheld dynamometer, respectively. Descriptive statistics and mixed model analysis were used to assess statistical difference (α = 0.05). The results showed that boys activate the GM muscle significantly more than girls during the pre-activation phase (P = 0.022). Boys also demonstrated greater normalized strength of hip external rotation than girls (P = 0.038), but not for hip abduction or duration of stance (P > 0.05). When adjusted for abduction strength, however, boys had significantly shorter stance duration than girls (P = 0.006). It seems that sex-dependent differences are present in preadolescent athletes as observed in the strength of hip external rotator muscles and neuromuscular activity of the GM muscle during a cutting maneuver. Future studies are needed to investigate whether these changes influence risk of lower limb/ACL injury during sport activities.

A digital twin framework for robust control of robotic-biological systems

Medical device regulatory standards are increasingly incorporating computational modelling and simulation to accommodate advanced manufacturing and device personalization. We present a method for robust testing of engineered soft tissue products involving a digital twin paradigm in combination with robotic systems. We developed and validated a digital twin framework for calibrating and controlling robotic-biological systems. A forward dynamics model of the robotic manipulator was developed, calibrated, and validated. After calibration, the accuracy of the digital twin in reproducing the experimental data improved in the time domain for all fourteen tested configurations and improved in frequency domain for nine configurations. We then demonstrated displacement control of a spring in lieu of a soft tissue element in a biological specimen. The simulated experiment matched the physical experiment with 0.09 mm (0.001%) root-mean-square error for a 2.9 mm (5.1%) length change. Finally, we demonstrated kinematic control of a digital twin of the knee through 70-degree passive flexion kinematics. The root-mean-square error was 2.00°, 0.57°, and 1.75° degrees for flexion, adduction, and internal rotations, respectively. The system well controlled novel mechanical elements and generated accurate kinematics in silico for a complex knee model. This calibration method could be applied to other situations where the specimen is poorly represented in the model environment (e.g., human or animal tissues), and the control system could be extended to track internal parameters such as tissue strain (e.g., control knee ligament strain). Further development of this framework can facilitate medical device testing and innovative biomechanics research.

Relationship between the knee valgus moment and the hip abductor and adductor activity during single-leg landing

OBJECTIVES

To reveal the relationship between the knee valgus moment (KVM) and the hip abductor and adductor activity during single-leg landing.

DESIGN

A cross-sectional study.

SETTING

Laboratory-based, between April 2020 and May 2021.

PARTICIPANTS

Thirty female collegiate athletes.

MAIN OUTCOME MEASURES

KVM, hip adduction angle, hip internal rotation angle, knee valgus angle (KVA), gluteus medius muscle activity, adductor longus muscle activity, adductor longus to gluteus medius activity ratio (ADD/GMED), and vertical component of the ground reaction force (vGRF).

RESULTS

Stepwise multiple regression analysis was performed. KVM was significantly positively associated with KVA (β = 0.613, p < 0.001), vGRF (β = 0.367, p = 0.010), and ADD/GMED (β = 0.289, p = 0.038).

CONCLUSIONS

Increased KVA, vGRF, and ADD/GMED were the independent factors that contributed to increased KVM during single-leg landing, and only ADD/GMED was found among the muscle activity values. The relative muscle activity of the gluteus medius and adductor longus, rather than those of the gluteus medius or adductor longus alone, may be useful in preventing anterior cruciate ligament injury during single-leg landing.

Diagnostics Using the Change-of-Direction and Acceleration Test (CODAT) of the Biomechanical Patterns Associated with Knee Injury in Female Futsal Players: A Cross-Sectional Analytical Study

The primary aim of this study was to identify kinematic differences at initial contact between female futsal players with and without previous knee injury, using a functional motor pattern test. The secondary aim was to determine kinematic differences between the dominant and non-dominant limb in the whole group, using the same test. A cross-sectional study was performed in 16 female futsal players allocated into two groups: eight females with a previous knee injury, i.e., affected by the valgus collapse mechanism without surgical intervention, and eight with no previous injury. The evaluation protocol included the change-of-direction and acceleration test (CODAT). One registration was made for each lower limb, i.e., the dominant (the preferred kicking limb) and non-dominant limb. A 3D motion capture system (Qualisys AB, Göteborg, Sweden) was used to analyze the kinematics. The Cohen's d effect sizes between the groups demonstrated a strong effect size towards more physiological positions in the non-injured group in the following kinematics in the dominant limb: hip adduction (Cohen's d = 0.82), hip internal rotation (Cohen's d = 0.88), and ipsilateral pelvis rotation (Cohen's d = 1.06). The t-test for the dominant and non-dominant limb in the whole group showed the following differences in knee valgus: dominant limb (9.02 ± 7.31 degrees) and non-dominant limb (1.27 ± 9.05 degrees) (p = 0.049). Conclusions: The players with no previous history of knee injury had a more physiological position for avoiding the valgus collapse mechanism in the hip adduction and internal rotation, and in the pelvis rotation in the dominant limb. All the players showed more knee valgus in the dominant limb, which is the limb at greater risk of injury.

Loading mechanisms of the anterior cruciate ligament

This review identifies the three-dimensional knee loads that have the highest risk of injuring the anterior cruciate ligament (ACL) in the athlete. It is the combination of the muscular resistance to a large knee flexion moment, an external reaction force generating knee compression, an internal tibial torque, and a knee abduction moment during a single-leg athletic manoeuvre such as landing from a jump, abruptly changing direction, or rapidly decelerating that results in the greatest ACL loads. While there is consensus that an anterior tibial shear force is the primary ACL loading mechanism, controversy exists regarding the secondary order of importance of transverse-plane and frontal-plane loading in ACL injury scenarios. Large knee compression forces combined with a posteriorly and inferiorly sloped tibial plateau, especially the lateral plateau-an important ACL injury risk factor-causes anterior tibial translation and internal tibial rotation, which increases ACL loading. Furthermore, while the ACL can fail under a single supramaximal loading cycle, recent evidence shows that it can also fail following repeated submaximal loading cycles due to microdamage accumulating in the ligament with each cycle. This challenges the existing dogma that non-contact ACL injuries are predominantly due to a single manoeuvre that catastrophically overloads the ACL.

Lower Extremity Kinematic Waveform Analysis During a Single Leg Drop Task - Including a Single Subject Design

BACKGROUND

Lower limb asymmetries may be associated with increased injury risk in an active female population. However, an appropriate method for determining these asymmetries has not been established.

HYPOTHESIS/PURPOSE

The purpose of the present study was to examine the single leg drop landing (SLD) kinematic waveforms of female recreational athletes for the pelvis, hip, and knee using statistical parametric mapping (SPM). It was hypothesized that individual bilateral differences would be masked by the group analysis.

STUDY DESIGN

Descriptive Laboratory Study.

METHODS

The current study examined the sagittal and frontal plane pelvis, hip, and knee kinematics of nine physically active females during a SLD. To better elucidate whether asymmetries were present between right and left limbs throughout the landing phase, data were analyzed with SPM. The time-series data were comprised from initial contact to the bottom of the landing. A single subject design was also included to account for potential interindividual variability.

RESULTS

At the group level there were no statistical differences between the right and left limbs of participants for all variables. The single subject design yielded at least two significant asymmetries for all participants. Six out of the nine participants had bilateral differences for all six kinematic time-series.

CONCLUSIONS

The lack of significant differences at the group level may have been masked by movement variability amongst participants. For example, when considering participants with significant differences for hip flexion, four participants had greater values on the left limb and three on the right. A similar observation was made for knee flexion where three participants had significantly greater kinematic values on the left versus four on the right. Until a method is developed to adequately dichotomize lower extremities during the SLD task, a single subject design strategy be used with group analysis when making bilateral comparisons.

LEVEL OF EVIDENCE

3.

Finite Element Analysis and Experimental Validation of the Anterior Cruciate Ligament and Implications for the Injury Mechanism

This study aimed to establish a finite element model that vividly reflected the anterior cruciate ligament (ACL) geometry and investigated the ACL stress distribution under different loading conditions. The ACL’s three-dimensional finite element model was based on a human cadaveric knee. Simulations of three loading conditions (134 N anterior tibial load, 5 Nm external tibial torque, 5 Nm internal tibial torque) on the knee model were performed. Experiments were performed on a knee specimen using a robotic universal force/moment sensor testing system to validate the model. The simulation results of the established model were in good agreement with the experimental results. Under the anterior tibial load, the highest maximal principal stresses (14.884 MPa) were localized at the femoral insertion of the ACL. Under the external and internal tibial torque, the highest maximal principal stresses (0.815 MPa and 0.933 MPa, respectively) were mainly concentrated in the mid-substance of the ACL and near the tibial insertion site, respectively. Combining the location of maximum stress and the location of common clinical ACL rupture, the most dangerous load during ACL injury may be the anterior tibial load. ACL injuries were more frequently loaded by external tibial than internal tibial torque.

Bilateral Alterations in Isokinetic Strength and Knee Biomechanics During Side-Cutting 1 Year After Unilateral ACL Reconstruction

BACKGROUND

Individuals with anterior cruciate ligament (ACL) reconstruction (ACLR) are a population that has a higher risk for ACL injury compared with the general population. To reduce the reinjury rate and improve the rehabilitation outcome after ACLR, risk factors for ACL injury have to be addressed.

PURPOSE

To compare the knee biomechanics during side-cutting and isokinetic strength of the thigh muscle of the reconstructed leg with those of the contralateral leg and healthy controls and investigate the knee movement asymmetries in individuals with ACLR.

STUDY DESIGN

Controlled laboratory study.

METHODS

A total of 16 participants with ACLR (ACLR group; 11.8 ± 1.1 months after reconstruction) and 16 healthy controls (control group) were recruited. Landmark coordinates and ground-reaction forces during side-cutting and isokinetic strength of hamstring and quadriceps were collected. Two-way analysis of variance with the mixed design was performed to compare each dependent variable between groups and across legs.

RESULTS

The reconstructed leg had a significantly smaller knee flexion angle (P = .004) and less quadriceps strength (P = .003) than the contralateral leg. The knee extension moment and knee external rotation angle were decreased compared with both the contralateral leg (P = .001, P = .003, respectively) and the healthy control leg (P = .001, P = .001, respectively). The ACLR group showed greater knee abduction angles (P = .004) and smaller knee external rotation moments (P = .006) than the control group. The ACLR group also demonstrated greater asymmetries of knee flexion angle (P = .015), knee external rotation angle (P = .001), knee extension moment (P = .013), knee abduction moment (P = .001), and quadriceps strength (P = .046) than the control group.

CONCLUSION

Knee biomechanics in the leg with ACLR were altered mainly in the sagittal plane during side-cutting compared with the contralateral leg. The altered movement patterns between the ACLR and control groups were primarily observed in the frontal and transverse planes. The ACLR group also demonstrated greater asymmetries of sagittal knee movement and concentric quadriceps strength than the control group.

CLINICAL RELEVANCE

Individuals with ACLR showed different alterations in the reconstructed and contralateral leg compared with healthy controls. These results suggest that rehabilitation programs after ACLR should further focus on restoring the knee flexion angle and quadriceps strength. Injury prevention programs need to be further targeted in the altered movement patterns observed between the ACLR and the healthy groups.

Comparing the Effects of Differential Learning, Self-Controlled Feedback, and External Focus of Attention Training on Biomechanical Risk Factors of Anterior Cruciate Ligament (ACL) in Athletes: A Randomized Controlled Trial

The current study aimed to compare the possible effects of differential learning strategy, self-controlled feedback, and external focus of attention on kinetic and kinematic risk factors of anterior cruciate ligament (ACL) injury in athletes. Forty-eight male athletes from three sports of handball, volleyball and basketball were selected for this study and were randomly divided into four groups: differential learning (n = 12), self-control feedback (n = 12), external focus (n = 12), and control (n = 12) group. All groups followed the intervention for eight weeks with three sessions per week. Data were analyzed by means of 4 × 2 repeated measures ANOVA followed by post hoc comparison (Bonferroni) at the significance level of p ≤ 0.05. A significant group × time interaction and the main effect of time was found for most kinetic and kinematic variables. The main effect of the group was significant only at the knee abduction angle. Differential learning and external focus of attention methods positively reduced the kinetic and kinematic variables that are considered risk factors for ACL injury. However, the effect sizes (Cohen's d) for the changes in most of the variables were larger for the differential learning group. Tailoring the boundary conditions that are based on the manipulations created in the exercise through variability and variety of movements associated with differential learning methods rather than repeating movements could reduce the risk of ACL injury.

Strength and Biomechanical Risk Factors for Noncontact ACL Injury in Elite Female Footballers: A Prospective Study

PURPOSE

This study aimed to determine if a preseason field-based test battery was prospectively associated with noncontact anterior cruciate ligament (ACL) injury in elite female footballers.

METHODS

In total, 322 elite senior and junior female Australian Rules Football and soccer players had their isometric hip adductor and abductor strength, eccentric knee flexor strength, countermovement jump (CMJ) kinetics, and single-leg hop kinematics assessed during the 2019 preseason. Demographic and injury history details were also collected. Footballers were subsequently followed for 18 months for ACL injury.

RESULTS

Fifteen noncontact ACL injuries occurred during the follow-up period. Prior ACL injury (odds ratio [OR], 9.68; 95% confidence interval (95% CI), 2.67-31.46), a lower isometric hip adductor to abductor strength ratio (OR, 1.98; 95% CI, 1.09-3.61), greater CMJ peak take-off force (OR, 1.74; 95% CI, 1.09-3.61), and greater single-leg triple vertical hop average dynamic knee valgus (OR, 1.97; 95% CI, 1.06-3.63) and ipsilateral trunk flexion (OR, 1.60; 95% CI, 1.01-2.55) were independently associated with an increased risk of subsequent ACL injury. A multivariable prediction model consisting of CMJ peak take-off force, dynamic knee valgus, and ACL injury history that was internally validated classified ACL injured from uninjured footballers with 78% total accuracy. Between-leg asymmetry in lower limb strength and CMJ kinetics were not associated with subsequent ACL injury risk.

CONCLUSIONS

Preseason field-based measures of lower limb muscle strength and biomechanics were associated with future noncontact ACL injury in elite female footballers. These risk factors can be used to guide ACL injury screening practices and inform the design of targeted injury prevention training in elite female footballers.

Relationship Between Posterior Tibial Slope and Lower Extremity Biomechanics During a Single-Leg Drop Landing Combined With a Cognitive Task in Athletes After ACL Reconstruction

Background:

A steeper posterior tibial slope (PTS) is an important risk factor for anterior cruciate ligament (ACL) reinjury. The PTS may affect lower extremity biomechanics under competition-like conditions for athletes with a reconstructed ACL.

Hypothesis:

It was hypothesized that the PTS would be associated with lower extremity biomechanics, which may increase ACL strain.

Study Design:

Descriptive laboratory study.

Methods:

Included were 10 athletes (mean age, 20.9 ± 1.8 years) who had undergone ACL reconstruction. The authors recorded the 3-dimensional lower extremity biomechanics while participants performed a single-leg drop jump with the Stroop task (dual task). Kinematic and kinetic data were analyzed and compared between the involved and contralateral limbs. The medial and lateral PTSs were measured using magnetic resonance imaging scans of the involved knee. The correlation between the biomechanical data and the PTS in each knee was evaluated.

Results:

The lateral PTS was significantly correlated with the maximum hip adduction moment (r = 0.64; P < .05) and maximum internal tibial rotation angle (r = 0.71; P < .05) in the involved limb. There were no differences in kinematic and kinetic data between the involved and contralateral limbs.

Conclusion:

In athletes after ACL reconstruction, the lateral PTS was directly associated with the maximum internal tibial rotation angle during single-leg drop landing with a cognitive task.

Clinical Relevance:

The findings in this study indicate that a steeper lateral PTS may cause internal rotation of the tibia during landing, which may be associated with reinjury in athletes with a reconstructed ACL.

Video Analysis of Anterior Cruciate Ligament Injury Situations in the Women's Australian Football League

Anterior cruciate ligament (ACL) injury rates in the Women's Australian Football League (AFLW) are alarmingly high. Understanding injuries within their sporting context is important to develop effective injury prevention strategies, yet there is currently little knowledge of how ACL injuries occur to AFLW players. This study addressed the common scenarios and characteristics of ACL injuries in the AFLW.

Online match and AFLW club injury reports identified 38 ACL injury cases. After excluding injuries where footage was unavailable (i.e. training, pre-season games), a video analysis of 21 match ACL injuries from the 2017-2020 AFLW seasons was performed. We examined match characteristics, and the player's movements and body postures preceding and at the estimated time of injury. Descriptive frequencies and relative proportions were determined across the assessed categories.

Non-contact ACL injuries were frequently observed (n=13, 61.9%), while contact preceding the injury event (i.e. indirect contact) was also common (n=10, 47.6%). The most common game situation was direct defence (i.e. defending an opponent in possession) (n=14, 66.7%). Sidestep cutting was the most prevalent movement (n=11, 52.4%), with this commonly performed while applying defensive pressure (n=6 of 11, 54.6%).

Sidestep cutting when applying defensive pressure is the most common non-contact ACL injury scenario in the AFLW. Preceding contact potentially contributing to a player's loss of balance was another prominent AFLW scenario. AFLW players may benefit from injury prevention programs emphasising appropriate sidestep cutting technique during reactive defensive scenarios, and maintenance of lower limb postures known to withstand knee loading relative to the sporting task.

Muscle Force Contributions to Anterior Cruciate Ligament Loading

Anterior cruciate ligament (ACL) injuries are one of the most common knee pathologies sustained during athletic participation and are characterised by long convalescence periods and associated financial burden. Muscles have the ability to increase or decrease the mechanical loads on the ACL, and thus are viable targets for preventative interventions. However, the relationship between muscle forces and ACL loading has been investigated by many different studies, often with differing methods and conclusions. Subsequently, this review aimed to summarise the evidence of the relationship between muscle force and ACL loading. A range of studies were found that investigated muscle and ACL loading during controlled knee flexion, as well as a range of weightbearing tasks such as walking, lunging, sidestep cutting, landing and jumping. The quadriceps and the gastrocnemius were found to increase load on the ACL by inducing anterior shear forces at the tibia, particularly when the knee is extended. The hamstrings and soleus appeared to unload the ACL by generating posterior tibial shear force; however, for the hamstrings, this effect was contingent on the knee being flexed greater than ~ 20° to 30°. The gluteus medius was consistently shown to oppose the knee valgus moment (thus unloading the ACL) to a magnitude greater than any other muscle. Very little evidence was found for other muscle groups with respect to their contribution to the loading or unloading of the ACL. It is recommended that interventions aiming to reduce the risk of ACL injury consider specifically targeting the function of the hamstrings, soleus and gluteus medius.

Effects of foot progression angle on kinematics and kinetics of a cutting movement

Purpose

Foot progression angle is a key factor for biomechanical knee load, which is associated with noncontact anterior cruciate ligament (ACL) injury during sports-specific tasks. The purpose of the present study was to assess the biomechanics of trunk, pelvis, and lower extremities during a cutting maneuver under different foot progression angles.

Methods

Nineteen male collegiate athletes (ages 18–24) participated in the present study. Cutting motion was analyzed using eight infrared cameras (250 Hz), two force plates (1250 Hz), and 44 reflective markers. Subjects performed 45-degree side cutting maneuvers under three foot progression angles, including 20 degrees (toe-out: TO), 0 degrees (neutral: TN), and − 20 degrees (toe-in: TI). Peak values of each biomechanical parameters in trunk, pelvis, hip, and knee within a first 40% stance phase and each parameter at the timing of the peak vertical ground reaction force were assessed. A statistical analysis was performed to compare data among the three-foot progression angles using the Friedman test.

Results

Peak angles of knee abduction, tibial internal rotation, hip internal rotation, and hip adduction were significantly greater for TI position than for TO position (p < 0.01). Peak moments of knee abduction and tibial internal rotation under TI position were also significantly larger than TO position (p < 0.01). Moreover, greater peak pelvis-trunk rotation was found for TI position than for TN and TO positions (p < 0.01).

Conclusion

From the present study, TI position could lead to an increased risk of ACL injury during a pre-planned cut maneuver, compared to TO position.

Symmetry and sex differences in knee kinematics and ACL elongation in healthy collegiate athletes during high-impact activities revealed through dynamic biplane radiography

The objectives of this study were to determine symmetry and sex differences in knee kinematics and anterior cruciate ligament (ACL) elongation waveforms in healthy athletes without a history of a knee injury during fast running, drop jump, and 180° internal/external rotation hops. It was hypothesized that knee abduction angle and ACL relative elongation would be greater in women than in men during all activities. Bilateral knee kinematics and ACL relative elongation were determined in 19 collegiate athletes using dynamic biplane radiography. Sex differences in kinematics and ACL relative elongation waveforms were identified using statistical parametric mapping. Average absolute side-to-side differences (SSD_A ) in kinematics and ACL relative elongation waveforms were determined for each activity. Women had up to 2.3° (all p < 0.05) less knee adduction angle and had greater ACL relative elongation (max. 4.8%-9.2%; all p < 0.01) than men during all activities, in support of the hypotheses. SSD_A in kinematics were 1.4 mm and 5.5° or less in all components of translation and rotation, respectively, while SSD_A in ACL relative elongation was 3.6% or less across all activities. Greater ACL relative elongation across a variety of activities may make women more susceptible to ACL injury than men. This study provides valuable reference data for identifying abnormal asymmetry in knee kinematics and ACL elongation in athletes after the ACL injury. These novel results improve our understanding of ACL elongation during demanding athletic activities and may help guide the development of sex-specific risk screening metrics, return to play assessments, and rehabilitation protocols after the ACL injury.

The Effects of Increasing Cognitive Load on Support Limb Kicking Mechanics in Male Futsal Players

Our objective was to examine the effects of cognitive load on support limb mechanics during a futsal kicking task. Twenty-one male futsal players completed kicks of a stationary ball without a secondary task (baseline), as well as kicks where cognitive load was increased by including a secondary cognitive task (dual-task) and requiring tracking of ball movement before the kick (pass). The athletes demonstrated less hip and knee flexion, higher loading rates, greater frontal and sagittal plane knee loading, and greater knee abduction for the dual-task condition, vs. baseline. They also demonstrated less knee flexion, higher loading rates, greater sagittal plane knee loading, and greater knee abduction for the pass condition, vs. baseline. It appears that cognitive load influences kicking mechanics.

Developing a Technique for the Imaging-Based Measurement of ACL Elongation: A Proof of Principle

Towards the goal of obtaining non-invasive biomarkers reflecting the anterior cruciate ligament’s (ACL) loading capacity, this project aimed to develop a magnetic resonance imaging (MRI)-based method facilitating the measurement of ACL elongations during the execution of knee stress tests. An MRI-compatible, computer-controlled, and pneumatically driven knee loading device was designed to perform Lachman-like tests and induce ACL strain. A human cadaveric leg was used for test purposes. During the execution of the stress tests, a triggered real-time cine MRI sequence with a temporal resolution of 10 Hz was acquired in a parasagittal plane to capture the resultant ACL elongations. To test the accuracy of these measurements, the results were compared to in situ data of ACL elongation that were acquired by measuring the length changes of a surgical wire directly sutured to the ACL’s anteromedial bundle. The MRI-based ACL elongations ranged between 0.7 and 1.7 mm and agreed very well with in situ data (root mean square errors, RMSEs ≤ 0.25 mm), although peak elongation rates were underestimated by the MRI (RMSEs 0.19–0.36 mm/s). The high accuracy of elongation measurements underlines the potential of the technique to yield an imaging-based biomarker of the ACL’s loading capacity.

Effect of Rearfoot Strikes on the Hip and Knee Rotational Kinetic Chain During the Early Phase of Cutting in Female Athletes

BACKGROUND

Biomechanical factors affecting horizontal-plane hip and knee kinetic chain and anterior cruciate ligament (ACL) injury risk during cutting maneuvers remain unclear. This study aimed to examine whether different foot strike patterns alter horizontal-plane hip and knee kinetics and kinematics during a cutting maneuver in female athletes and clarify the individual force contribution for producing high-risk hip and knee loadings. Twenty-five healthy female athletes performed a 60° cutting task with forefoot and rearfoot first strike conditions. Horizontal-plane hip and knee moment components, angles, and angular velocities were calculated using synchronized data of the marker positions on the body landmarks and ground reaction forces (GRFs) during the task. The one-dimensional statistical parametric mapping paired t test was used to identify the significant difference in kinetic and kinematic time-series data between foot strike conditions.

RESULTS

In the rearfoot strike condition, large hip and knee internal rotation loadings were produced during the first 5% of stance due to the application of GRFs, causing a significantly larger hip internal rotation excursion than that of the forefoot strike condition. Dissimilarly, neither initial hip internal rotation displacement nor knee internal rotation GRF loadings were observed in the forefoot strike condition.

CONCLUSIONS

Rearfoot strike during cutting appears to increase noncontact ACL injury risk as the GRF tends to produce combined hip and knee internal rotation moments and the high-risk lower limb configuration. Conversely, forefoot strike during cutting appears to be an ACL-protective strategy that does not tend to produce the ACL-harmful joint loadings and lower extremity configurations. Thus, improving foot strike patterns during cutting should be incorporated in ACL injury prevention programs.

Kinematics observed during ACL injury are associated with large early peak knee abduction moments during a change of direction task in healthy adolescents

Cluster analysis of knee abduction moment waveforms may be useful to examine biomechanical data. The aim of this study was to analyze if the knee abduction moment waveform of early peaks, consistent with anterior cruciate ligament injury mechanisms, was associated with foot-trunk distance, knee kinematics, and heel strike landing posture, all of which have been observed during anterior cruciate ligament injuries. One hundred and seventy-seven adolescent athletes performed cutting maneuvers, marker-based motion capture collected kinetic and marker data and an 8-segment musculoskeletal model was constructed. Knee abduction moment waveforms were clustered as either a large early peak, or not a large early peak using a two-step process with Euclidean distances and the Ward-d2 cluster method. Mediolateral distance between foot and trunk was associated with the large early peak waveform with an odds ratio (95% confidence interval) of 3.4 (2.7-4.4). Knee flexion angle at initial contact and knee flexion excursion had odds ratios of 1.9 (1.6-2.4) and 1.6 (1.3-2.0). Knee abduction excursions had an odds ratio of 1.8 (1.1-2.4) and 1.8 (1.4-2.4), respectively. Heel strike landings and anteroposterior distance between foot and trunk were not associated with the large early peak waveform with odds ratios of 1.2 (0.9-1.7) and 1.1 (0.8-1.3), respectively. The knee abduction moment waveform is associated with several kinematic variables observed during ACL injury. The results support intervention programs that can modify these kinematics and thus reduce early stance phase knee abduction moments.

Effects of Pubertal Maturation on ACL Forces During a Landing Task in Females

BACKGROUND

Rates of anterior cruciate ligament (ACL) rupture in young people have increased by >70% over the past two decades. Adolescent and young adult females are at higher risk of ACL injury as compared with their prepubertal counterparts.

PURPOSE

To determine ACL loading during a standardized drop-land-lateral jump in females at different stages of pubertal maturation.

STUDY DESIGN

Controlled laboratory study.

METHODS

On the basis of the Tanner classification system, 19 pre-, 19 early-/mid-, and 24 late-/postpubertal females performed a standardized drop-land-lateral jump while 3-dimensional body motion, ground-reaction forces, and surface electromyography data were acquired. These data were used to model external biomechanics, lower limb muscle forces, and knee contact forces, which were subsequently used in a validated computational model to estimate ACL loading. Statistical parametric mapping analysis of variance was used to compare ACL force and its causal contributors among the 3 pubertal maturation groups during stance phase of the task.

RESULTS

When compared with pre- and early-/midpubertal females, late-/postpubertal females had significantly higher ACL force with mean differences of 471 and 356 N during the first 30% and 48% to 85% of stance, and 343 and 274 N during the first 24% and 59% to 81% of stance, respectively, which overlapped peaks in ACL force. At the point of peak ACL force, contributions from sagittal and transverse plane loading mechanisms to ACL force were higher in late-/postpubertal compared with pre- and early-/midpubertal groups (medium effect sizes from 0.44 to 0.77). No differences were found between pre- and early-/midpubertal groups in ACL force or its contributors.

CONCLUSION

The highest ACL forces were observed in late-/postpubertal females, consistent with recently reported rises of ACL injury rates in females aged 15 to 19 years. It is important to quantify ACL force and its contributors during dynamic tasks to advance our understanding of the loading mechanism and thereby provide guidance to injury prevention.

CLINICAL RELEVANCE

Growth of ACL volume plateaus around 10 years of age, before pubertal maturation, meaning that a late-/postpubertal female could have an ACL of similar size to their less mature counterparts. However, late-/postpubertal females have higher body mass requiring higher muscle forces to accelerate the body during dynamic tasks, which may increase ACL loading. Thus, if greater forces develop in these females, in part because of their increased body mass, these higher forces will be applied to an ACL that is not proportionally larger. This may partially explain the higher rates of ACL injury in late-/postpubertal females.

The future of in-field sports biomechanics: wearables plus modelling compute real-time in vivo tissue loading to prevent and repair musculoskeletal injuries

This paper explores the use of biomechanics in identifying the mechanistic causes of musculoskeletal tissue injury and degeneration. It appraises how biomechanics has been used to develop training programmes aiming to maintain or recover tissue health. Tissue health depends on the functional mechanical environment experienced by tissues during daily and rehabilitation activities. These environments are the result of the interactions between tissue motion, loading, biology, and morphology. Maintaining health of and/or repairing musculoskeletal tissues requires targeting the "ideal" in vivo tissue mechanics (i.e., loading and deformation), which may be enabled by appropriate real-time biofeedback. Recent research shows that biofeedback technologies may increase their quality and effectiveness by integrating a personalised neuromusculoskeletal modelling driven by real-time motion capture and medical imaging. Model personalisation is crucial in obtaining physically and physiologically valid predictions of tissue biomechanics. Model real-time execution is crucial and achieved by code optimisation and artificial intelligence methods. Furthermore, recent work has also shown that laboratory-based motion capture biomechanical measurements and modelling can be performed outside the laboratory with wearable sensors and artificial intelligence. The next stage is to combine these technologies into well-designed easy to use products to guide training to maintain or recover tissue health in the real-world.

Incidence of Associated Lesions of Multiligament Knee Injuries: A Systematic Review and Meta-analysis

Background:

The incidence of concomitant injuries, including meniscal and cartilage injuries, has not been adequately reported in previous studies on multiligament knee injury (MLKI) because their primary focal points have been the degree of ligament injury, treatment strategy, involvement of other soft tissues, and neurovascular injury.

Purpose:

To analyze the incidence of associated lesions in MLKIs, including medial and lateral meniscal injuries, cartilage lesions, and complications.

Study Design:

Systemic review; Level of evidence, 4.

Methods:

The PubMed, Embase, Cochrane Library, CINAHL, and Scopus databases were searched between inception and April 30, 2020. Studies were included if they reported the incidence rates of medial and/or lateral meniscal tears and cartilage injuries in cases of MLKIs. For the meta-analysis, data were extracted on clinical outcomes measured according to the number of medial and/or lateral meniscal tears, cartilage injuries, and complications.

Results:

A total of 45 studies were included in the MLKI analysis (3391 patients). The pooled rate of medial meniscal tears was 30.4% (95% CI, 24.1%-37.1%; P < .0001; I² = 85.8%). The pooled rate of lateral meniscal tears was 27.5% (95% CI, 20.3%-35.3%; P < .0001; I² = 89.6%). The pooled rate of cartilage injuries was 27.5% (95% CI, 22.1%-33.3%; P < .0001; I² = 86.8%). The pooled rates of peroneal nerve injuries, vascular injuries, and arthrofibrosis were 19.2% (95% CI, 14.2%-24.7%; P < .001; I² = 81.3%), 18.4% (95% CI, 13.2%-24.3%; P < .0001; I² = 81.0%), and 11.2% (95% CI, 8.1%-14.7%; P = .0018; I² = 54.0%), respectively.

Conclusion:

The pooled rates of meniscal tears and cartilage injuries concomitant with MLKIs were high, ranging from 27% to 30%, and the pooled rates of peroneal nerve injury, vascular injury, and arthrofibrosis were considerable, ranging from 11% to 19%. The influence of these associated lesions on clinical results should be evaluated in future clinical studies.

Test-retest reliability of entire time-series data from hip, knee and ankle kinematics and kinetics during one-leg hops for distance: Analyses using integrated pointwise indices

Motion capture systems enable in-depth interpretations of human movements based on data from three-dimensional joint angles and moments. Such analyses carry important bearings for evaluation of movement control during for instance hop landings among sports-active individuals from a performance perspective but also in rehabilitation. Recent statistical development allows analysis of entire time-series of angle and moment during hops using functional data analysis, but the reliability of such multifaceted data is not established. We used integrated pointwise indices (intra-class correlation, ICC; standard error of measurement, SEM) to establish the test-retest reliability of three-dimensional hip, knee and ankle angle and moment curves during landings of one-leg hop for distance (OLHD) in 23 asymptomatic individuals aged 18-28. We contrasted these findings to reliability of discrete variables extracted at specific events (initial contact, peak value). We extended the calculations of ICC and SEM to handle unbalanced situations (varying number of repetitions) to include all available data. Hip and knee angle curves proved reliable with stable ICC curves throughout the landing, with integrated ICCs ≥ 0.71 for all planes except for knee internal/external rotation (ICC = 0.57). Hip and knee moment curves and ankle angle and moments were less reliable and less stable, particularly in the first ~ 10-25% of the landing (integrated ICCs 0.44-0.57). Curve data were generally not in agreement with the results for discrete event data, thus advocating analysis of curve data which contains more information. To conclude, hip and knee angle curve data during OLHD landings can reliably be evaluated, while moment curves necessitate careful consideration.

Effects of an Injury Prevention Program on Anterior Cruciate Ligament Injury Risk Factors in Adolescent Females at Different Stages of Maturation

The ideal timing to implement anterior cruciate ligament injury prevention programs with respect to maturation is unclear. The purpose of this study was to investigate the effects of an injury prevention program on knee mechanics in early-, late-, and post-pubertal females. In the study, 178 adolescent female basketball players were assigned to six groups: early-pubertal training, early-pubertal control, late-pubertal training, and late-pubertal control, post-pubertal training, and post-pubertal control. The training groups performed an injury prevention program for six months. Medial knee displacement, knee flexion range of motion, and the probability of high knee abduction moment were assessed before and after the training period. After the six-month training period, medial knee displacement was significantly increased in the early-pubertal control group whereas it was unchanged in the early-pubertal training group. Knee flexion range of motion was significantly decreased in the early-pubertal control group whereas it did not change in the early-pubertal training group. The probability of high knee abduction moment was increased in the early-pubertal control group whereas it was unchanged in the earl-pubertal training group. The probability of high knee abduction moment was also decreased in the post-pubertal training group whereas it did not change in the post-pubertal control group. The program limited the development of high-risk movement patterns associated with maturation in early puberty while improving the knee mechanics in post-pubertal adolescents. Therefore, an injury prevention program should be initiated in early puberty and continue through the post-puberty years.

Mechanism of Anterior Cruciate Ligament Loading during Dynamic Motor Tasks

INTRODUCTION

This study determined anterior cruciate ligament (ACL) force and its contributors during a standardized drop-land-lateral jump task using a validated computational model.

METHODS

Three-dimensional whole-body kinematics, ground reaction forces, and muscle activation patterns from eight knee-spanning muscles were collected during dynamic tasks performed by healthy recreationally active females (n = 24). These data were used in a combined neuromusculoskeletal and ACL force model to determine lower limb muscle and ACL forces.

RESULTS

Peak ACL force (2.3 ± 0.5 bodyweight) was observed at ~14% of stance during the drop-land-lateral jump. The ACL force was primarily generated through the sagittal plane, and muscle was the dominant source of ACL loading. The main ACL antagonists (i.e., loaders) were the gastrocnemii and quadriceps, whereas the hamstrings were the main ACL agonists (i.e., supporters).

CONCLUSION

Combining neuromusculoskeletal and ACL force models, the roles of muscle in ACL loading and support were determined during a challenging motor task. Results highlighted the importance of the gastrocnemius in ACL loading, which could be considered more prominently in ACL injury prevention and rehabilitation programs.

Mechanics of cadaveric anterior cruciate ligament reconstructions during simulated jump landing tasks: Lessons learned from a pilot investigation

BACKGROUND

Around half of anterior cruciate ligament (ACL) injuries are treated through reconstruction, but the literature lacks mechanical investigation of reconstructions in a dynamic athletic task and rupture environment. The current objective was to ascertain the feasibility of investigating ACL reconstructions in a rupture environment during simulated landing tasks in a validated mechanical impact simulator.

METHODS

Four cadaveric lower extremities were subjected to simulated landing in a mechanical impact simulator. External joint loads that mimicked magnitudes recorded from an in vivo population were applied to each joint in a stepwise manner. Simulations were repeated until ACL failure was achieved. Repeated measures design was used to test each specimen in the native ACL and hamstrings, quadriceps, and patellar tendon reconstructed states.

FINDINGS

ACL injuries were generated in 100% of specimens. Graft substance damage occurred in 58% of ACLRs, and in 75% of bone tendon bone grafts. Bone tendon bone and quadriceps grafts survived greater simulated loading than hamstrings grafts, but smaller simulated loading than the native ACL. Median peak strain prior to failure was 20.3% (11.6, 24.5) for the native ACL and 17.4% (9.5, 23.3) across all graft types.

INTERPRETATION

The simulator was a viable construct for mechanical examination of ACLR grafts in rupture environments. Post-surgery, ACL reconstruction complexes are weaker than the native ACL when subjected to equivalent loading. Bone tendon bone grafts most closely resembled the native ligament and provided the most consistently relevant rupture results. This model advocated reconstruction graft capacity to sustain forces generated from immediate gait and weightbearing during rehabilitation from an ACL injury.

The non-sagittal knee moment vector identifies 'at risk' individuals that the knee abduction moment alone does not

Multi-planar forces and moments are known to injure the anterior cruciate ligament (ACL). In ACL injury risk studies, however, the uni-planar frontal plane external knee abduction moment is frequently studied in isolation. This study aimed to determine if the frontal plane knee moment (KM-Y) could classify all individuals crossing a risk threshold compared to those classified by a multi-planar non-sagittal knee moment vector (KM-YZ). Recreationally active females completed three sports tasks-drop vertical jumps, single-leg drop vertical jumps and planned sidesteps. Peak knee abduction moments and peak non-sagittal resultant knee moments were obtained for each task, and a risk threshold of the sample mean plus 1.6 standard deviations was used for classification. A sensitivity analysis of the threshold from 1-2 standard deviations was also conducted. KM-Y did not identify all participants who crossed the risk threshold as the non-sagittal moment identified unique individuals. This result was consistent across tasks and threshold sensitivities. Analysing the peak uni-planar knee abduction moment alone is therefore likely overly reductionist, as this study demonstrates that a KM-YZ threshold identifies 'at risk' individuals that a KM-Y threshold does not. Multi-planar moment metrics such as KM-YZ may help facilitate the development of screening protocols across multiple tasks.

Biomechanical Determinants of Performance and Injury Risk During Cutting: A Performance-Injury Conflict?

BACKGROUND

Most cutting biomechanical studies investigate performance and knee joint load determinants independently. This is surprising because cutting is an important action linked to performance and non-contact anterior cruciate ligament (ACL) injuries. The aim of this study was to investigate the relationship between cutting biomechanics and cutting performance (completion time, ground contact time [GCT], exit velocity) and surrogates of non-contact ACL injury risk (knee abduction [KAM] and internal rotation [KIRM] moments) during 90° cutting.

DESIGN

Mixed, cross-sectional study following an associative design. 61 males from multidirectional sports performed six 90° pre-planned cutting trials, whereby lower-limb and trunk kinetics and kinematics were evaluated using three-dimensional (3D) motion and ground reaction force analysis over the penultimate (PFC) and final foot contact (FFC). Pearson's and Spearman's correlations were used to explore the relationships between biomechanical variables and cutting performance and injury risk variables. Stepwise regression analysis was also performed.

RESULTS

Faster cutting performance was associated (p ≤ 0.05) with greater centre of mass (COM) velocities at key instances of the cut (r or ρ = 0.533-0.752), greater peak and mean propulsive forces (r or ρ = 0.449-0.651), shorter FFC GCTs (r or ρ = 0.569-0.581), greater FFC and PFC braking forces (r = 0.430-0.551), smaller hip and knee flexion range of motion (r or ρ = 0.406-0.670), greater knee flexion moments (KFMs) (r = 0.482), and greater internal foot progression angles (r = - 0.411). Stepwise multiple regression analysis revealed that exit velocity, peak resultant propulsive force, PFC mean horizontal braking force, and initial foot progression angle together could explain 64% (r = 0.801, adjusted 61.6%, p = 0.048) of the variation in completion time. Greater peak KAMs were associated with greater COM velocities at key instances of the cut (r or ρ = - 0.491 to - 0.551), greater peak knee abduction angles (KAA) (r = - 0.468), and greater FFC braking forces (r = 0.434-0.497). Incidentally, faster completion times were associated with greater peak KAMs (r = - 0.412) and KIRMs (r = 0.539). Stepwise multiple regression analysis revealed that FFC mean vertical braking force and peak KAA together could explain 43% (r = 0.652, adjusted 40.6%, p < 0.001) of the variation peak KAM.

CONCLUSION

Techniques and mechanics associated with faster cutting (i.e. faster COM velocities, greater FFC braking forces in short GCTs, greater KFMs, smaller hip and knee flexion, and greater internal foot progression angles) are in direct conflict with safer cutting mechanics (i.e. reduced knee joint loading, thus ACL injury risk), and support the "performance-injury conflict" concept during cutting. Practitioners should be conscious of this conflict when instructing cutting techniques to optimise performance while minimising knee joint loading, and should, therefore, ensure that their athletes have the physical capacity (i.e. neuromuscular control, co-contraction, and rapid force production) to tolerate and support the knee joint loading during cutting.

THE NEW INJURIES' RISK AFTER ACL RECONSTRUCTION MIGHT BE REDUCED WITH FUNCTIONAL TRAINING

Objective:

The objective of our study was to evaluate if functional training with the Functional Movement Screen (FMS) can reduce the risk of a new injury for patients that underwent an anterior cruciate ligament reconstruction (ACLR). Our hypothesis was that the functional training might reduce the risk of a new injury.

Methods:

Our training protocol consisted of six phases, each one lasting six weeks. It began two months after surgery. The study group was composed of 10 individuals that completed our protocol after ACLR. The control group consisted of 10 people that completed a regular ACLR rehabilitation protocol. The FMS was used to compare the study and control group performance. Patients with a score of 14 or less on the FMS were considered more likely to suffer an injury than those with a score higher than 14.

Results:

The study group average FMS score was 16.6 compared to the control group at 12.3. Functional training for ACLR rehabilitation added a statistically significant benefit (p < 0.0002) to reduce the risk of a new injury compared to regular protocol.

Conclusion:

Functional training may be considered an alternative to the regular ACLR rehabilitation to reduce the risk of a new injury before returning to sports. Level of Evidence III, Case control study.

Influence of Anticipation and Motor-Motor Task Performance on Cutting Biomechanics in Healthy Men

CONTEXT

Biomechanical analyses of cutting tasks have demonstrated kinematic differences associated with the noncontact knee-injury risk when the movement direction is unanticipated. Motor-motor dual tasks occur within dynamic environments and change the demand for attentional resources needed to complete athletic maneuvers, which may contribute to injury risk.

OBJECTIVE

To investigate the influence of anticipation and motor-motor task performance on cutting biomechanics.

DESIGN

Cross-sectional study.

SETTING

Laboratory.

PATIENTS OR OTHER PARTICIPANTS

A total of 32 healthy, recreationally active men (age = 23.1 ± 3.6 years, height = 180.0 ± 7.0 cm, mass = 81.3 ± 17.3 kg) who self-reported regular participation in cutting sports.

INTERVENTION(S)

Participants performed a 45° side-step cut on the dominant limb in a random order of conditions: anticipation (anticipated, unanticipated) and task (no ball throw, ball fake, ball throw).

MAIN OUTCOME MEASURE(S)

Triplanar trunk, hip, and knee angles were assessed throughout the stance phase using 3-dimensional motion capture. Data were analyzed using a time series of means calculated from initial contact to toe-off (0%-100%) with 90% confidence intervals. Mean differences between conditions were identified as regions of nonoverlapping confidence intervals, and those that occurred during the region of peak vertical ground reaction force (0%-25%) are presented.

RESULTS

Regardless of anticipation, attending to a ball (ball throw) resulted in more trunk extension (range = 2.9°-3.7°) and less lateral trunk flexion toward the cutting direction (range = 5.2°-5.9°). Planning to attend to a ball (ball fake) resulted in less lateral trunk flexion toward the cutting direction (4.7°). During unanticipated cutting, more trunk rotation away from the cutting direction was observed when attending to a ball (range = 5.3°-7.1°). The interaction of anticipation and task had a similar influence on sagittal- and frontal-plane trunk position.

CONCLUSIONS

Motor-motor task performance and its interaction with anticipation induced an upright, neutral trunk position during side-step cutting, which has been associated with the risk for noncontact knee injury. Promoting task complexity during rehabilitation and injury-prevention programs may better prepare individuals to succeed when performing high-risk athletic maneuvers.

Normative data and correlation between dynamic knee valgus and neuromuscular response among healthy active males: a cross-sectional study

The dynamic knee valgus (DKV) during different sport maneuvers has been widely described as risk factor to develop an anterior cruciate ligament injury. Hip and knee muscles seem to have a crucial role to prevent the dynamic knee valgus. This study aimed to give normative and correlational data about DKV and hip and knee neuromuscular response (NMR) among healthy active males. The hypothesis is that DKV could be correlated with hip NMR. A cross-sectional correlational study. Research Anatomy Laboratory. The study was carried out among 50 active, non-injured males. Dynamic Knee-Valgus angle and lower limb posterior chain muscles Neuromuscular Response. DKV was measured using Kinovea software during a Single-Legged Drop Jump test and NMR was measured using tensiomyography and myotonometry for gluteus maximum, biceps femoris, semitendinosus, lateral and medial gastrocnemius. Right and left limbs were both performed and analyzed independently. No significant correlation was observed between DKV and hip and knee muscles NMR. This study shows normative and correlational data about dynamic knee valgus, tensiomyography and myotonometry for healthy and active males. The DKV control seems to be non-correlated with isolated hip and knee muscles NMR so this suggests it is more about Central Nervous System activity than about isolated muscles NMR.

Prospective Frontal Plane Angles Used to Predict ACL Strain and Identify Those at High Risk for Sports-Related ACL Injury

Background:

Knee abduction moment during landing has been associated with anterior cruciate ligament (ACL) injury. However, accurately capturing this measurement is expensive and technically rigorous. Less complex variables that lend themselves to easier clinical integration are desirable.

Purpose:

To corroborate in vitro cadaveric simulation and in vivo knee abduction angles from landing tasks to allow for estimation of ACL strain in live participants during a landing task.

Study Design:

Descriptive laboratory study.

Methods:

A total of 205 female high school athletes previously underwent prospective 3-dimensional motion analysis and subsequent injury tracking. Differences in knee abduction angle between those who went on to develop ACL injury and healthy controls were assessed using Student t tests and receiver operating characteristic analysis. A total of 11 cadaveric specimens underwent mechanical impact simulation while instrumented to record ACL strain and knee abduction angle. Pearson correlation coefficients were calculated between these variables. The resultant linear regression model was used to estimate ACL strain in the 205 high school athletes based on their knee abduction angles.

Results:

Knee abduction angle was greater for athletes who went on to develop injury than for healthy controls (P < .01). Knee abduction angle at initial contact predicted ACL injury status with 78% sensitivity and 83% specificity, with a threshold of 4.6° of knee abduction. ACL strain was significantly correlated with knee abduction angle during cadaveric simulation (P < .01). Subsequent estimates of peak ACL strain in the high school athletes were greater for those who went on to injury (7.7-8.1% ± 1.5%) than for healthy controls (4.1-4.5% ± 3.6%) (P < .01).

Conclusion:

Knee abduction angle exhibited comparable reliability with knee abduction moment for ACL injury risk identification. Cadaveric simulation data can be extrapolated to estimate in vivo ACL strain. Athletes who went on to ACL injury exhibited greater knee abduction and greater ACL strain than did healthy controls during landing.

Clinical Relevance:

These important associations between the in vivo and cadaveric environments allow clinicians to estimate peak ACL strain from observed knee abduction angles. Neuromuscular control of knee abduction angle during dynamic tasks is imperative for knee joint health. The present associations are an important step toward the establishment of a minimal clinically important difference value for ACL strain during landing.

THE RELATIONSHIP BETWEEN Y-BALANCE TEST SCORES AND KNEE MOMENTS DURING SINGLE-LEG JUMP-LANDING IN NETBALL

Background

Using 3-dimensional motion analysis to derive knee moments that may contribute to non-contact anterior cruciate ligament (ACL) injuries during single-leg jump-landing is expensive and time consuming. Severe ACL injuries that are inappropriately rehabilitated can potentially end athletes' careers. Consequently, a quick-and-simple to administer screening tool that can be used to infer knee moments during single-leg jump-landing could be useful for regular screening of netballers' predispositions to increased knee loading during single-leg jump-landing.

Purpose

The purpose of this study was to investigate whether knee moments during weight-acceptance phase of a forward single-leg jump for maximal distance were correlated with reach scores in the Y-Balance Test (YBT).

Study Design

Cross-sectional, Correlation.

Methods

Twenty-one female national-level netballers performed two and three successful trials on the YBT and forward single-leg jump-landing, respectively, with the non-dominant leg. A three-dimensional motion analysis system captured trunk and lower limb kinematics and ground reaction forces of the non-dominant leg during landing. Averages of peak knee flexion-extension, valgus-varus and internal-external rotation moments across jumps were calculated and correlations with peak directional reach scores were examined.

Results

A strong positive correlation existed between posteromedial reach with externally applied flexor moments (r = 0.56, p = ≤ 0.01). A moderate negative correlation existed between anterior reach distances with internal rotation moments (T _b = -0.32, p = 0.05). No correlation was found between valgus moments and YBT reaches.

Conclusions

The YBT shows potential to indicate externally applied flexion- and internal rotation moments during forward jump-landing on the non-dominant leg.

Level of Evidence

3.

Do knee abduction kinematics and kinetics predict future anterior cruciate ligament injury risk? A systematic review and meta-analysis of prospective studies

BACKGROUND

To systematically review the association between knee abduction kinematics and kinetics during weight-bearing activities at baseline and the risk of future anterior cruciate ligament (ACL) injury.

METHODS

Systematic review and meta-analysis according to PRISMA guidelines. A search in the databases MEDLINE (PubMed), CINAHL, EMBASE and Scopus was performed. Inclusion criteria were prospective studies including people of any age, assessing baseline knee abduction kinematics and/or kinetics during any weight-bearing activity for the lower extremity in individuals sustaining a future ACL injury and in those who did not.

RESULTS

Nine articles were included in this review. Neither 3D knee abduction angle at initial contact (Mean diff: -1.68, 95%CI: - 4.49 to 1.14, ACL injury n = 66, controls n = 1369), peak 3D knee abduction angle (Mean diff: -2.17, 95%CI: - 7.22 to 2.89, ACL injury n = 25, controls n = 563), 2D peak knee abduction angle (Mean diff: -3.25, 95%CI: - 9.86 to 3.36, ACL injury n = 8, controls n = 302), 2D medial knee displacement (cm; Mean diff:: -0.19, 95%CI: - 0,96 to 0.38, ACL injury n = 72, controls n = 967) or peak knee abduction moment (Mean diff:-10.61, 95%CI: - 26.73 to 5.50, ACL injury n = 54, controls n = 1330) predicted future ACL injury.

CONCLUSION

Contrary to clinical opinion, our findings indicate that knee abduction kinematics and kinetics during weight-bearing activities may not be risk factors for future ACL injury. Knee abduction of greater magnitude than that observed in the included studies as well as factors other than knee abduction angle or moment, as possible screening measures for knee injury risk should be evaluated in future studies.

Linear Discriminant Analysis Successfully Predicts Knee Injury Outcome From Biomechanical Variables

BACKGROUND

The most commonly damaged structures of the knee are the anterior cruciate ligament (ACL), medial collateral ligament (MCL), and menisci. Given that these injuries present as either isolated or concomitant, it follows that these events are driven by specific mechanics versus coincidence. This study was designed to investigate the multiplanar mechanisms and determine the important biomechanical and demographic factors that contribute to classification of the injury outcome.

HYPOTHESIS

Linear discriminant analysis (LDA) would accurately classify each injury type generated by the mechanical impact simulator based on biomechanical input variables (ie, ligament strain and knee kinetics).

STUDY DESIGN

Controlled laboratory study.

METHODS

In vivo kinetics and kinematics of 42 healthy, athletic participants were measured to determine stratification of injury risk (ie, low, medium, and high) in 3 degrees of knee forces/moments (knee abduction moment, anterior tibial shear, and internal tibial rotation). These stratified kinetic values were input into a cadaveric impact simulator to assess ligamentous strain and knee kinetics during a simulated landing task. Uniaxial and multiaxial load cells and implanted strain sensors were used to collect mechanical data for analysis. LDA was used to determine the ability to classify injury outcome by demographic and biomechanical input variables.

RESULTS

From LDA, a 5-factor model (Entropy R2 = 0.26) demonstrated an area under the receiver operating characteristic curve (AUC) for all 5 injury outcomes (ACL, MCL, ACL+MCL, ACL+MCL+meniscus, ACL+meniscus) of 0.74 or higher, with "good" prediction for 4 of 5 injury classifications. A 10-factor model (Entropy R2 = 0.66) improved the AUC to 0.86 or higher, with "excellent" prediction for 5 injury classifications. The 15-factor model (Entropy R2 = 0.85), produced 94.1% accuracy with the AUC 0.98 or higher for all 5 injury classifications.

CONCLUSION

Use of LDA accurately predicted the outcome of knee injury from kinetic data from cadaveric simulations with the use of a mechanical impact simulator at 25° of knee flexion. Thus, with clinically relevant kinetics, it is possible to determine clinical risk of injury and also the likely presentation of singular or concomitant knee injury.

CLINICAL RELEVANCE

LDA demonstrates that injury outcomes are largely characterized by specific mechanics that can distinguish ACL, MCL, and medial meniscal injury. Furthermore, as the mechanics of injury are better understood, improved interventional prehabilitation can be designed to reduce these injuries.

Filtration Selection and Data Consilience: Distinguishing Signal from Artefact with Mechanical Impact Simulator Data

A large variety of data filtration techniques exist in biomechanics literature. Data filtration is both an 'art' and a 'science' to eliminate noise and retain true signal to draw conclusions that will direct future hypotheses, experimentation, and technology development. Thus, data consilience is paramount, but is dependent on filtration methodologies. In this study, we utilized ligament strain, vertical ground reaction force, and kinetic data from cadaveric impact simulations to assess data from four different filters (12 vs. 50 Hz low-pass; forward vs. zero lag). We hypothesized that 50 Hz filtered data would demonstrate larger peak magnitudes, but exhibit consilience of waveforms and statistical significance as compared to 12 Hz filtered data. Results demonstrated high data consilience for matched pair t test correlations of peak ACL strain (≥ 0.97), MCL strain (≥ 0.93) and vertical ground reaction force (≥ 0.98). Kinetics had a larger range of correlation (0.06-0.96) that was dependent on both external load application and direction of motion monitored. Coefficients of multiple correlation demonstrated high data consilience for zero lag filtered data. With respect to in vitro mechanical data, selection of low-pass filter cutoff frequency will influence both the magnitudes of discrete and waveform data. Dependent on the data type (i.e., strain and ground reaction forces), this will not likely significantly alter conclusions of statistical significance previously reported in the literature with high consilience of matched pair t-test correlations and coefficients of multiple correlation demonstrated. However, rotational kinetics are more sensitive to filtration selection and could be suspect to errors, especially at lower magnitudes.

Sex Differences in Anatomic Features Linked to Anterior Cruciate Ligament Injuries During Skeletal Growth and Maturation

BACKGROUND

Several anatomic features of the knee have been shown to affect joint and anterior cruciate ligament (ACL) loading and the risk of subsequent injuries. While several studies have highlighted sex differences between these anatomic features, little is known on how these differences develop during skeletal growth and maturation.

HYPOTHESES

(A) Anatomic features linked to an ACL injury will significantly change during skeletal growth and maturation. (B) The age-related changes in anatomic features linked to an ACL injury are different between male and female patients.

STUDY DESIGN

Cross-sectional study; Level of evidence, 3.

METHODS

After institutional review board approval, magnetic resonance imaging data from 269 unique knees (patient age 3-18 years; 51% female), free from any injuries, were used to measure femoral notch width, posterior slope of the lateral tibial plateau (lateral tibial slope), medial tibial depth, tibial spine height, and posterior lateral meniscal bone angle. Linear regression was used to test the associations between age and quantified anatomic indices. Patients were then divided into 4 age groups: preschool (3-6 years), prepubertal (7-10 years), early adolescent (11-14 years), and late adolescent (15-18 years). Also, 2-way analysis of variance with the Holm-Sidak post hoc test was used to compare morphology between male and female patients in each age group.

RESULTS

The femoral notch width, medial tibial depth, and tibial spine height significantly increased with age (P < .001). The lateral tibial slope decreased with age only in male patients (P < .001). Except for the posterior lateral meniscal bone angle, the age-related changes in anatomy were different between male and female patients (P < .05). On average, early and late adolescent female patients had smaller femoral notches, steeper lateral tibial slopes, flatter medial tibial plateaus, and shorter tibial spines compared with age-matched male patients (P < .01).

CONCLUSION

Overall, the findings supported our hypotheses, showing sex-specific changes in anatomic features linked to an ACL injury during skeletal growth and maturation. These observations help to better explain the reported age and sex differences in the prevalence of ACL injuries. The fact that most of these anatomic features undergo substantial changes during skeletal growth and maturation introduces the hypothesis that prophylactic interventions (ie, activity modification) would have the potential to reshape a maturing knee in a manner that lowers the risk of noncontact ACL injuries.