E-waste: a problem or an opportunity? Review of issues, challenges and solutions in Asian countries

Informal E-waste dismantling activities accelerated the releasing of liquid crystal monomers (LCMs) in Pakistan: Occurrence, distribution, and exposure assessment

Liquid crystal monomers (LCMs) are emerging contaminants characterized by their persistence, bioaccumulation potential, and toxicity. They have been observed in several environmental matrices associated with electronic waste (e-waste) dismantling activities, particularly in China. However, there is currently no information on the pollution caused by LCMs in other developing countries, such as Pakistan. In this study, we collected soil samples (n = 59) from e-waste dismantling areas with different functions in Pakistan for quantification analysis of 52 target LCMs. Thirty out of 52 LCMs were detected in the soil samples, with the concentrations ranging from 2.14 to 191 ng/g (median: 16.3 ng/g), suggesting widespread contamination by these emerging contaminants. Fluorinated LCMs (median: 10.4 ng/g, range: 1.27-116 ng/g) were frequently detected and their levels were significantly (P < 0.05) higher than those of non-fluorinated LCMs (median: 6.11 ng/g, range: not detected (ND)-76.7 ng/g). The concentrations and profiles of the observed LCMs in the soil samples from the four functional areas varied. The informal dismantling of e-waste poses a potential exposure risk to adults and infants, with median estimated daily intake (EDI, ng/kg bw/day) values of 0.0420 and 0.1013, respectively. Calculation of the hazard quotient (HQ) suggested that some LCMs (e.g., ETFMBC (1.374) and EDFPB (1.257)) may pose potential health risks to occupational workers and their families. Considering the widespread contamination and risks associated with LCMs, we strongly recommend enhancing e-waste management and regulation in Pakistan.

Pyrolytic urban mining of waste printed circuit boards: an enviro-economic analysis

E-waste, a global environmental concern resulting from supply chain inefficiency, also offers the opportunity to recover valuable materials, including general and rare earth metals. Waste printed circuit boards (WPCBs) are integral components of e-waste that contains substantial amounts of precious metals, making them a valuable waste category. Pyrolysis has emerged as a promising method for material recovery from WPCBs. Hence, pyrolytic urban mining of WPCBs offers an excellent avenue for resource recovery, redirecting valuable materials back into the supply chain. Under the current study, experimental investigation has been conducted to explore the recovery of materials from WPCBs through pyrolysis followed by process simulation, economic analysis, and life cycle assessment (LCA). An Aspen Plus simulation was conducted to model the pyrolysis of WPCBs and subsequent product recovery using a non-equilibrium kinetic model, which represents a unique approach in this study. Another distinct aspect is the comprehensive assessment of environmental and economic sustainability. The economic analysis has been carried out using Aspen economic analyzer whereas the LCA of WPCB pyrolysis has been conducted using the SimaPro software. The experimental investigation reveals yield of solid residues are about 75-84 wt.%, liquid yields of 6-13 wt.%, and gas yields of 4-21 wt.%, which is in well agreement with the Aspen Plus simulation results. The economic analysis for an e-waste pyrolysis plant with an annual feed rate of 2000 t reveals that the total capital cost of a pyrolysis plant is nearly $51.3 million, whereas the total equipment cost is nearly $2.7 million and the total operating cost is nearly $25.6 million. The desired rate of return is 20% per year and the payback period is 6 years with a profitability index of 1.25. From the LCA, the major impact categories are global warming, fossil resource scarcity, ozone formation in human health, ozone formation in terrestrial ecosystems, fine particulate matter formation, and water consumption. The findings of this study can serve as a guideline for e-waste recyclers, researchers, and decision-makers in establishing circular economy.

Design and simulation of a cross-regional collaborative recycling system for secondary resources: A case of lead-acid batteries

In emerging economies, a significant amount of secondary resources are recycled by the informal sector, which can seriously harm the environment. However, some previous studies of industry management policy design ignored geographical factors. This paper introduces Geographic Information Systems into an agent-based cross-regional recycling model, and employs lead-acid batteries as an example. The model quantitatively displays the evolution of recycling markets in 31 provinces in Mainland China. Results show that: (1) High subsidies can significantly increase the number of formal enterprises in the short term, but their effectiveness decreases when the proportion of government funds in subsidies is above 80% in the long run; (2) The number of illegal recycling enterprises increases by 294% in eight inland provinces (e.g., Ningxia, Xinjiang) when all funds are invested in supervision, but this number is quite small in subsidy policy scenarios; (3) In four eastern regions, including Beijing and Tianjin, the number of illegal recycling enterprises decreases by 84% if supervision is more favored than subsidy; (4) In the optimal case where spatiotemporal factors are considered in all 31 regions, illegal recycling enterprises and waste lead emissions can be reduced by 95.59% and 45.85% nationwide. Our proposed recycling model offers a detailed simulation of multiple regions and diverse stakeholders, and serves as a useful reference for targeted recovery policies. Governments in inland regions like Ningxia and Xinjiang should implement subsidy policies, while supervision policies should be implemented in developed regions like Beijing and Tianjin.

Change in the chemical, mechanical and physical properties of plastics due to UVA degradation in different water matrices: A study on the recyclability of littered plastics

To move towards a circular society, the recyclability potential of littered plastics should be explored to provide potential value for a product that is typically destined for landfill or incineration. This study aims to understand the changes in physical, mechanical, and chemical properties of four types of plastics (polyethylene terephthalate (PET), polypropylene (PP), polycarbonate (PC) and polylactic acid (PLA) after simulated environmental degradation. Plastic samples were subjected to different water matrices (in an attempt to simulate terrestrial, ocean, and river environments) to understand the role the environment plays on plastic degradation. Significant physical, mechanical, and chemical changes were observed for the PET, PP and PLA samples. Flakes and cracks were noted during the scanning electron microscopy (SEM) analysis of PET, PP and PLA illustrating the surface degradation that had occurred. Colour scanning of the samples provided complementary information about their suitability for upcycling or downcycling. Both PET and PP had visual colour changes, making them unsuitable for upcycling purposes. PLA had a significant decrease in its tensile strength in all environmental conditions, alongside significant chemical and surface change as revealed by Fourier-transform infrared (FTIR) and SEM analysis, respectively. PC had little to no changes in its chemical, mechanical, and physical properties due to high resistance to solar (UVA) degradation in presence of salt and natural organic matter in the form of humic acid. Therefore, out of the four types of plastics tested, PC was the only plastic determined to have good upcycling potential if collected from the environment. However, PET and PP could still be recycled into lower value products (i.e., construction materials).

A review of various strategies in e-waste management in line with circular economics

Waste management of electrical and electronic equipment has become a key challenge for electronics manufacturers due to globalization and the rapid expansion of information technology. As the volume of e-waste grows, legal departments lack the infrastructure, technology, and ability to collect and manage it environmentally soundly. Government laws, economic reasons, and social issues are important considerations in e-waste management. The circular economy concept is built on reusing and recycling goods and resources. A novel idea called the circular economy might prevent the negative consequences brought on by the exploitation and processing of natural resources while also having good effects such as lowering the demand for raw materials, cutting down on the use of fundamental resources, and creating jobs. To demonstrate the significance of policy implementation, the necessity for technology, and the need for societal awareness to build a sustainable and circular economy, the study intends to showcase international best practices in e-waste management. This study uses circular economy participatory implementation methods to provide a variety of possible approaches to assist decision-makers in e-waste management. The purpose of this article is to review the most accepted methods for e-waste management to emphasize the importance of implementing policies, technology requirements, and social awareness in creating a circular economy. To conclude, this paper highlights the necessity of a common legal framework, reform of the informal sector, the responsibility of different stakeholders, and entrepreneurial perspectives.

Informal E-waste recycling practices and environmental pollution in Africa: What is the way forward?

Globally, e-waste is the fastest growing and most valuable waste-stream. While countries worldwide are increasingly acknowledging the e-waste problem and introducing policies and regulations that deal with e-waste, large quantities of e-waste still go undocumented. Much of these global e-wastes are accumulating in open-dumpsites and landfills in African-countries where they are recycled informally resulting in significant environmental and public-health concerns. Although, there is a plethora of studies on e-waste management and disposal, only a few-studies have focused on African-countries who are major recipients of e-waste. Moreover, despite the attempts to mitigate the problem of e-waste in African-countries, e-waste has remained a major-concern and there are currently very limited workable solutions. This study examines informal e-waste recycling, environmental pollution and the extent of environmental and health impacts in major countries of concern including Ghana, Nigeria, Egypt, Kenya and South Africa. The global e-waste Waste Atlas Report, 2020 identified these countries as major recipients of e-waste. To achieve the aims of this research, previous studies from 2005 to 2022 are collected from various databases and analyzed. Accordingly, this study focuses on environmental pollution and public-health impacts resulting from e-waste dumping and informal recycling practices, illegal transboundary shipment of e-waste to the selected countries, and the interventions of governments and international organizations in reducing the impact of e-waste pollution and informal recycling practices in Africa. Based on the outcomes of this study, practical approaches on the way-forward are recommended. The findings of this study contribute to a growing-body of research on informal e-waste recycling practices in Africa to document that individuals working within e-waste sites and residents in nearby communities are exposed to a number of toxic-substances, some at potentially concerning levels.

University students' awareness of e-waste and its disposal practices in Pakistan: a construction of the conceptual framework

Pakistan is among the few countries generating and receiving enormous e-waste, which posits a threat to its future generations. A systematic literature review also suggests exploring e-waste awareness in Asia to understand awareness and behavior. Therefore, the present study explored university students' awareness of e-waste and the factors hindering the disposal of laptops, personal computers, and cellphones and suggested a conceptual framework. The study used the qualitative research approach and non-probability sampling. We collected data through four focus group discussions (FGDs) with students at a Pakistani university. After data saturation, we developed themes from FGDs and found computer sciences and engineering students with better awareness than others. The factors hindering e-waste disposal were lower monetary benefits for disposal, breach of sensitive information, nostalgic association with devices, and non-availability of disposal facilities. Other variables like lower resale value and high family sharing increased the storage of e-devices and reduced e-waste disposal. The research is among a few initial attempts to explore e-waste awareness and factors hindering disposal behavior in e-waste-receiving countries (e.g., Pakistan) and provides evidence from students who are the primary users. Our findings are crucial for policymakers to take corrective actions, introduce monetary benefits, and secure disposal to reduce e-waste.

The Materials Science behind Sustainable Metals and Alloys

Production of metals stands for 40% of all industrial greenhouse gas emissions, 10% of the global energy consumption, 3.2 billion tonnes of minerals mined, and several billion tonnes of by-products every year. Therefore, metals must become more sustainable. A circular economy model does not work, because market demand exceeds the available scrap currently by about two-thirds. Even under optimal conditions, at least one-third of the metals will also in the future come from primary production, creating huge emissions. Although the influence of metals on global warming has been discussed with respect to mitigation strategies and socio-economic factors, the fundamental materials science to make the metallurgical sector more sustainable has been less addressed. This may be attributed to the fact that the field of sustainable metals describes a global challenge, but not yet a homogeneous research field. However, the sheer magnitude of this challenge and its huge environmental effects, caused by more than 2 billion tonnes of metals produced every year, make its sustainability an essential research topic not only from a technological point of view but also from a basic materials research perspective. Therefore, this paper aims to identify and discuss the most pressing scientific bottleneck questions and key mechanisms, considering metal synthesis from primary (minerals), secondary (scrap), and tertiary (re-mined) sources as well as the energy-intensive downstream processing. Focus is placed on materials science aspects, particularly on those that help reduce CO₂ emissions, and less on process engineering or economy. The paper does not describe the devastating influence of metal-related greenhouse gas emissions on climate, but scientific approaches how to solve this problem, through research that can render metallurgy fossil-free. The content is considering only direct measures to metallurgical sustainability (production) and not indirect measures that materials leverage through their properties (strength, weight, longevity, functionality).

Unintentional formation of mixed chloro-bromo diphenyl ethers (PBCDEs), dibenzo-p-dioxins and dibenzofurans (PBCDD/Fs) from pyrolysis of polybrominated diphenyl ethers (PBDEs)

This study presents the comprehensive investigation for formation pathways of chloro-bromo-mixed products from the pyrolysis of polybrominated diphenyl ethers (PBDEs). In the study, a total of 23 PBDEs with bromination levels from mono-to deca-were selected. Each PBDE standard was sealed in the glass vial and then heated under 450 °C in the muffle furnace to simulate the pyrolysis process. The results demonstrated that PBDEs in the glass vials can unintentionally transform into chloro-bromo diphenyl ethers (PBCDEs) and dibenzo-p-dioxin and dibenzofurans (PBCDD/Fs) during the pyrolysis process. Atmosphere pressure gas chromatography (APGC) coupled with high-resolution mass spectrometry (HRMS) was used to identify these pyrolysis products, which demonstrated that all investigated nPBDEs (n represents the number of bromine substituents) can unintentionally transform into Cl₁-(n-1)BDEs, Cl₂-(n-2)BDEs, Cl₁-(n-1)BDFs, and Cl₁-(n-3)BDDs, while some nPBDEs can transform into Cl₁-(n-2)PBDD/Fs during pyrolysis. Experimental phenomena assisted with density functional theory (DFT) calculations reveal that Cl atom can substitute at C-Br rather than C-H, and Cl₁-(n-1)BDEs can be easily generated by Cl atom attacking at C-Br sites with low energy barriers (3.66-11.9 kcal/mol). In addition, nPBDEs with lower bromination levels are more favorable to generate Cl₁-(n-1)BDEs than those with higher bromination levels. Further DFT calculations suggest that PBDEs are preferentially first transformed into Cl₁-(n-1)BDEs, then subsequentially transform into PBCDD/Fs. We believe the results of this study can greatly improve our understanding of the transformation mechanism from PBDEs to cholo-bromo-mixed products in thermal treatment processes and provide new insight into controlling the emission of toxic cholo-bromo-mixed products.

What drives WEEE recycling? A comparative study concerning legislation, collection and recycling

Waste electrical and electronic equipment (WEEE) has been rising worldwide, and its improper management incurs in economic losses and environmental damage. To provide a better understanding of the forces that drive the management of WEEE, economic and political roles are discussed by comparing the WEEE recycling system of Brazil and Australia. Additional insights about the recycling systems were gathered from interviews with recyclers of both countries (in-loco visits and online/phone surveys). Previous studies show that both countries act as first stage recyclers, dismantling WEEE to ship their valuable components for international recyclers (such as printed circuit boards) while keeping less valuable material (such as polymeric and ferrous pieces). Australia has defined the responsibilities of most agents involved in the WEEE management and recycling setup, while Brazil inadvertently has left the system to be defined through free market regulation. As Brazil recently signed a reverse logistic agreement, there is an important opportunity to channel WEEE into formal routes and implement improvements in the entire recycling system (some suggestions are provided). Australian recyclers were found more organised in their disassembly lines, and some characteristics of the Australian model can be adapted for the Brazilian benefit. In conclusion, economic factors will drive first stage recycling (where labour wages are a small fraction of the total costs) and international downstream recycling, while a political framework is necessary to establish a comprehensive collection system, first stage recycling (where wages are representative) and domestic downstream recycling, given these are generally non-profitable activities in the short term.

Decreasing e-waste through reliability enhancement encouraged by performance-based contracting

Purpose

In the last 20 years, e-waste has become a serious issue resulting from an overwhelming amount of electronics consumption. However, there has been limited research on how to decrease such waste in a structured manner. Toward study was to use a simulation methodology to investigate the dynamics of upfront investment in reliability enhancement promoted by performance-based contracting (PBC), based on the number of spare parts and duration of the contract.

Design/methodology/approach

The present research first details the relevant mathematical equations and uses game theory to demonstrate the utility for supplier and buyer relationships. Next, the effects of reliability enhancement, spare partsPBC are analyzed using a BlockSim simulation model.

Findings

The results indicate strong relationships among system design cost, reliability, availability and service cost. The authors found that investment in reliability increases system availability while reducing total service costs. Furthermore, increasing the spare parts inventory was determined to have less influence on the readiness of highly reliable systems. The findings support the notion that PBC reduces e-waste by increasing system availability, incentivizing upfront investment in reliability growth.

Research limitations/implications

Recognition of these findings in the context of buyer–supplier relationships will help managers better understand the value of upfront reliability investment, reducing maintenance, repair and overhaul requirements, avoiding the need to plan for extra spare parts and minimizing volume and the resulting e-waste.

Practical implications

This study also clarifies the uncertainty associated with upfront investment and provides potential incentives for suppliers.

Originality/value

The main contribution of this study is its use of PBC for e-waste reduction, highlighting the effects of upfront investment in reliability enhancement. The authors applied a game theory model to illustrate the relationship between incentives and upfront investment and demonstrate how increased levels of spare parts can be counterproductive to achieving readiness, reducing inventory and consequent e-waste.

Reverse logistics research of municipal hazardous waste: a literature review

The reverse logistics of municipal hazardous waste (RLMHW) have received close attention from researchers and practitioners alike, given the essential impact of safe transportation and effective management of hazardous waste on public health and environmental sustainability. There are a great number of studies in the extant literature on RLMHW, with many and diverse research topics; however, a concise and complete overview of the research works already conducted in this particular area is conspicuous by its absence. This paper strives to fill the gap through the conduct of rigorous systematic literature review of RLMHW in the past three decades, and then establish a framework of studies on RLMHW. The main contributions of this study are as follows: (1) to identify the trend of journals publishing research papers on RLMHW; (2) to extract the main topics in studies on RLMHW; (3) to locate the most popular research areas of RLMHW; (4) to summarize the methods adopted in studies on RLMHW; (5) to identify research deficiencies in certain categories of RLMHW; and (6) to establish the future research directions of RLMHW. The main implications of the study are to offer a better understanding of RLMHW by systematic crystallization of archival data in a systematic chronological order across central issues. This study contributes to scholarly debate in this field by serving as a snapshot paper to document the development of the field and gives input to policymakers in process design and policy making in the domain of RLMHW.

Exploring the Awareness Regarding E-waste and Its Management among Electronic Repair Workers and Scrap Dealers of South Delhi, India

Introduction

In India, E-waste and its proper disposal is an emerging environmental and public health issue.

Aim and Objectives

To assess the level of awareness regarding E-waste and its management among the electronic repair workers and scrap dealers of Delhi.

Material and Methods

It was a community based, cross-sectional, descriptive study, was of one year (1^st April, 2015-31^st March, 2016). Electronic repair workers and scrap dealers were included after getting their written consent and selected by non-probability convenient sampling. A pre-tested, semi- structured, interviewer administered questionnaire was used. The data was entered in MS Excel and was analyzed using the SPSS version 21.0.

Results

A total of 300 workers i.e. 150 electronic repair workers and 150 scrap dealers participated. Most of the electronic repair workers (57%) and scrap dealers (48%) were of 20-39 yrs old. 70% of electronic repair workers and 79% of scrap dealers had not heard about e-waste. As education among these groups increases, awareness regarding E-waste also increased and it was statistically significant.

Conclusion

Adequate IEC (Information, education and communication) services focusing on health hazards of E-waste should be widely disseminated.

An assessment of e-waste generation and environmental management of selected countries in Africa, Europe and North America: A systematic review

Waste generated from electrical and electronic equipment collectively known as e-waste has remained a persistent environmental problem. Globally, approximately 53.6 million tons of e-waste was generated in 2019. Of this amount generated, less than 13% was recycled and the rest ended up in landfills or incinerators creating enormous environmental and health concerns due to the presence of hazardous materials. While there are several previous-studies on e-waste, research findings of the United Nations global e-waste report 2020 shows that many countries are not sufficiently managing e-waste generated and greater effort is urgently required to ensure smarter and more sustainable e-waste management. On this premise, this study critically reviews previous research on e-waste generation and management practices of selected-countries - Canada, France, United States, United Kingdom, Nigeria and South Africa; provides an overview of progress made and identifies areas for improvement. These countries are selected because they are some of the largest-producers of e-waste worldwide. To achieve the objectives of this study, previous-studies from 2005 to 2020 are collected from databases. The study focuses on aspects such as e-waste generation, e-waste recycling, e-waste disposal methods and behaviour, environmental management of e-waste, e-waste problems and challenges and e-waste legislation of these countries. This study further categorised previous-studies of selected-countries in relation to type and scope of research, e-waste categories evaluated and study locations. Based on the findings/outcomes of the analysis on the current-situation of the selected-countries in the literature, this study proposes generic best-practice approaches to e-waste generation and environmental management taking into account country-specific issues and identifies future research areas.

Achievements in pyrolysis process in E-waste management sector

Many aspects of modern life of our civilization are associated with using electrical and electronic devices (EEE). Ever-increasing demand for high-performance EEE and accelerated technological development make the replacement of EEE become frequent. This leads to the generation of a tremendous amount of electronic waste (E-waste). Challenges of the management of E-waste have recently arisen out of a dearth of proper technologies to treat E-waste. Pyrolysis process can thermochemically treat waste materials that have a complicated nature and inhomogeneity. This article gives a systematic review as an effort to tackle the challenges in the context of achievements in pyrolysis process in E-waste management sector. Pyrolysis mechanism and types of pyrolysis processes and pyrolysis reactors are first discussed. Various pyrolysis technologies applied to the E-waste treatment are then summarized and compared to each other. Points to be considered for further research and pending challenges of E-waste pyrolysis are also discussed. The pyrolysis treatment of E-waste is not yet fully industrialized mostly because of high costs. However, there should be much room for further developing the E-waste pyrolysis; hence, its industrialization and commercialization is just a matter of time.

A Systematic Review of E-Waste Generation and Environmental Management of Asia Pacific Countries

Due to the rapid increase in the use of electrical and electronic equipment (EEE) worldwide, e-waste has become a critical environmental issue for many governments around the world. Several studies have pointed out that failure to adopt appropriate recycling practices for e-waste may cause environmental disasters and health concerns to humans due to the presence of hazardous materials. This warrants the need for a review of the existing processes of e-waste management. In view of the growing e-waste generation in the Asia Pacific region and the importance of e-waste management, this study critically reviews previous research on e-waste generation and management practices of major e-waste producing nations (Australia, China, India, Indonesia, and Malaysia) in the Asia Pacific region, provides an overview of progress made and identifies areas for improvement. To fulfil the aims of this research, previous studies from 2005 to 2020 are collected from various databases. Accordingly, this study focuses on e-waste generation and environmental management of these countries. This study found that e-waste management practices of the selected countries need to be enhanced and recommends several best practices for effectively managing e-waste.

Ureolytic bacteria from electronic waste area, their biological robustness against potentially toxic elements and underlying mechanisms

Ureolytic bacteria can be a promising mediator used for the immobilization of potentially toxic elements via microbially-induced carbonate precipitation (MICP) process from biodegradable ions to carbonate form. Electronic waste (E-waste) environment is very complex compared to general metal contaminated soil, however, MICP has not been studied under such an environment. In this study, three bacterial strains were successfully isolated from an E-waste area in Guiyu, China, and indicated to have positive ureolytic behavior with significant heavy metal resistance (specific to Cu and Pb), among which, a strain of Lysinibacillus sp. was proven to show a great persistence in heavy metal immobilization. This featured strain can tolerate up to 100 ppm copper and 1000 ppm lead according to minimal inhibitory concentration (MIC) results, and its urease activity was well-adapted to metal effects. Results also revealed the positive correlation (R² = 0.9819) between metal concentrations and surface layer protein content present in bacterial cells. The underlying mechanism on the role of S-layer protein in heavy metal immobilization during biocalcification was elucidated. The metabolic system of heavy metal resistance for these E-waste derived isolates is novel and represents a point of interest for possible environmental applications to immobilize toxic heavy metals from electronic waste sites.

E-waste management and its effects on the environment and human health

Challenges in managing electronic waste (E-waste) arise from a lack of technical skills, poor infrastructure, inadequate financial support, and inactive community engagement. This study provides a systematic review of efforts to overcome these challenges in the context of inappropriate recycling protocols of E-waste and their toxic effects on human health and the environment. An inventory of end-of-life electronic products, which can be established through the creation of an environment friendly regulatory regime for recycling, is essential for the proper control of E-waste. An approach has been articulated to help implement effective management of E-waste in both developed and developing countries. Enforcement of systematic management measures for E-waste in developing countries coupled with best practices is expected to minimize adverse impacts while helping maintain a sustainable and resilient environment.

Untapped potentials of hazardous nanoarchitectural biopolymers

The First Industrial Revolution began when manual labour transitioned to machines. Fossil fuels and steam eventually replaced wood and water as an energy source used predominantly for the mechanized production of textiles and iron. The emergence of the required numerous enormous factories gave rise to smoke pollution due to the immense growth in coal consumption. The manufactured gas industry produced highly toxic effluent that was released into sewers and rivers polluting the water. Many pieces of legislation were introduced to overcome this issue, but with varying degrees of effectiveness. Alongside our growth in world population, the problems that we had with waste remained, but together with our increase in number the waste produced has also increased additionally. The immense volume of waste materials generated from human activity and the potentially detrimental effects on the environment and on public health have awakened in ourselves a critical need to embrace current scientific methods for the safe disposal of wastes. We are informed daily that our food waste must be better utilized to ensure enough food is available to feed the world's growing population in a sustainable way (Thyberg and Tonjes, 2016). Some things are easy, like waste food and cellulose products can be turned into compost, but how do we recycle sheep's wool? Or shrimp shells? Despite the fact that both these substances are hazardous, and have caused environmental and economic impact from being incinerated; but we anticipate that those substances may have the potential to convert into added value applications.We have been working in this area for over 15 years, working towards managing them and seeking their added value applications. We take the biological products, process (reconstitute) and engineer them into added value products such as functional and nanostructure materials including edible films, foams and composites including medical devices useful in the human body. Anything that we can ingest, should not cause an immune response in the human system. Natural biomacromolecules display the inherent ability to perform very specific chemical, mechanical or structural roles. Specifically, protein- and polysaccharide-based biomaterials have come to light as the most promising candidates for many biomedical applications due their biomimetic and nanostructured arrangements, their multi-functional features, and their capability to function as matrices that are capable of facilitating cell-cell and cell-matrix interactions.

Reuse assessment of WEEE: Systematic review of emerging themes and research directions

The reuse of Waste Electrical and Electronic Equipment (WEEE) is deemed the best end-of-life option in terms of the environmental impact and socio-economic benefits. Taking this cue, this paper applies a systematic literature review to map the existing knowledge base to present the major and emerging themes of the reuse assessment of WEEE. In all, 12,216 articles published from 2005 to 2019 in the Web of Science, ProQuest, and Google Scholar are collected, from which 331 articles are shortlisted for review. The shortlisted articles are divided into two sub-periods 2005-2014 and 2015-2019 to draw out the development of the research themes and the contribution of the recent research articles to the literature on WEEE reuse assessment. Bibliographic coupling combined with keyword analysis is performed using SciMat and VOSViewer. The results inform that the major ongoing themes are Consumer behaviour towards use, disposal, collection, reuse, repair and recycling of WEEE; Assessing the potential of WEEE for reuse; Product recovery strategy and market analysis for WEEE remanufacturing; and Material flow analysis of WEEE in circular economy. The research themes of Informal WEEE management in developing countries; Impact of government subsidy on WEEE management; and Product service system and circular economy deserve further attention. In the articles reviewed, mobile phones and computers are extensively studied for WEEE reuse assessment followed by refrigerators and televisions. Assessing the environmental impact and legal aspects of WEEE reuse, cross-border movements and flow in secondary markets, policies and regulations on the purchase of reprocessed WEEE, and the reprocessing and revenue made by the informal sector in developing countries are possibilities for future research.

Dynamic modelling of Australian rooftop solar photovoltaic product stewardship transition

As rooftop solar photovoltaic (PV) adoption in Australia is exponentially growing in the past decade, there is a need to promote effective product stewardship for PV panels reaching their end-of-life (EoL). This paper presents the development of a System Dynamics (SD) model for managing EoL rooftop PV panels based on the circular economy concept. Four stages of the SD modelling process include problem scoping and variable identification, model conceptualisation, SD model development, and scenario analysis. Stakeholder engagement is central to this research as the system under study is underpinned by high uncertainties and limited data availability. Four socio-technical transition pathways examined in this study include market-driven growth, conservative development, shared responsibility, and disruptive change. The simulation results indicated an improvement of collection and recovery performance when a stringent product stewardship scheme is enabled and improvement of installers' participation in the collection program. This study argued that a system of shared responsibility will be capable of balancing techno-economic motivations of stakeholders across the supply chain to participate in the recovery scheme, while being less disruptive to PV adoption. Under this scenario, a gradual change in regulatory requirements (e.g. recovery target and material recovery rate requirements) is introduced to allow a period of industry and market development.

Worker health in formal electronic waste recycling plants

Purpose

This article explores the protective measures and the occupational health and safety (OHS) prevention strategies in place in the formal electronic equipment recycling (e-recycling) industry, more specifically in the Greater Montreal area (Quebec, Canada) and their consequences: health inequalities and level of compliance with environmental standards.

Design/methodology/approach

Semi-structured interviews were conducted using two respondent-specific questionnaires, one for workers and one for supervisors. Data collection and analytic procedures drew from qualitative content analysis. It was tempted to identify differences in OHS practices in relation to the workers' employment status and to link the companies' OHS concerns to their level of compliance with environmental standards.

Findings

The article highlights specific OHS issues in the formal e-recycling industry. Enforcing compliance with environmental standards as a lever for promoting OHS appears to be a promising strategy. Another main finding was the workforce diversity and related OHS vulnerabilities in this industry and the challenges they pose to employers' ability to adequately and equally reach and protect all workers involved.

Originality/value

To date, too little attention appears to have been paid to working conditions and worker protection in this rapidly growing sector. Specific prevention programmes could be implemented and adapted to the industry's diverse workforce and its multiple OHS vulnerabilities. This issue calls for the international community to take responsibility, as many electronic waste (e-waste) generated worldwide is shipped to developing countries, where lack of regulation and control is much more striking in a sector that remains very largely informal.

Human exposure to PBDEs in e-waste areas: A review

Polybrominated biphenyl ethers (PBDEs) are commonly added to electronic products for flame-retardation effects, and are attracting more and more attentions due to their potential toxicity, durability and bioaccumulation. This study conducts a sysmtematic review to understand the human exposure to PBDEs from e-waste recycling, especially exploring the exposure pathways and human burden of PBDEs as well as investigating the temporal trend of PBDEs exposure worldwide. The results show that the particular foods (contaminated fish, poultry, meat and breast milk) ingestion, indoor dust ingestion and indoor air inhalation may be key factors leading to human health risks of PBDEs exposure in e-waste recycling regions. Residents and some vulnerable groups (occupational workers and children) in e-waste recycling areas may face higher exposure levels and health risks. PBDE exposure is closely related to exposure level, exposure duration, e-waste recycling methods, and dietary customs. High levels of PBDEs are found in human tissues (breast milk, hair, blood (serum), placenta and other tissues) in e-waste areas, at far higher levels than in other areas. Existing data indicate that PBDE exposure levels do not present any apparent downward trend, and will possibly cause serious human diseases. More epidemiological studies are still needed to provide a solid basis for health risk assessment.

The formation pathways of polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) from pyrolysis of polybrominated diphenyl ethers (PBDEs): Effects of bromination arrangement and level

This study presents comprehensive formation pathways of polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) from the pyrolysis of polybrominated diphenyl ethers (PBDEs). A total of 23 PBDE congeners, from mono- to hepta- brominated, were selected to conduct the pyrolysis experiments. The results suggest that n-PBDEs (where n means the number of bromine substituents) can transform into n/(n-1) PBDFs and (n-1)/(n-2) PBDDs as long as they meet certain structural requirement. One single PBDE congener can only transform (if possible) specific PBDF or PBDD based on their specific brominated arrangement by direct/oxygen bridge connecting the two ortho-carbon atoms. Among all selected BDEs, we found that only 2,2',4,4',5,5'-hexaBDE (BDE-153) can transform into 2,3,7,8-tetraBDD, which is most toxic congener among these group of compounds. When the degree of bromination increased, the yield of polybromobenzene increased, while that of the PBDD/Fs decreased, suggesting that the higher PBDEs favors to break the ether bond to form polybromobenzene, while the lower PBDEs favor transformation into PBDD/Fs. We proposed that the results in this study greatly improved our understanding on the transformation of PBDD/Fs from PBDEs in the pyrolysis process.

Environmental and health impacts due to e-waste disposal in China - A review

E-waste is discarded and shipped mostly to developing countries located in Asian continent for disposal from other developed countries. Especially 70% of the world's e-waste ends up in Guiyu, a small town located in Guangdong Province of China. As little as 25% is recycled in formal recycling centers with adequate protection for workers and the other e-waste arrived in those areas is not handled in organized manner. As per reports only roughly 12.5% of e-waste is actually recycled, and the recycling efforts in those regions are primitive and result in toxic substances being leached into the surrounding ecosystems. In addition to persistent organic pollutants, there are many heavy metals found in the ground and river sediments in Guiyu, exceeding the threshold set to protect human health. Those areas are no longer suitable for growing food, and water is unsafe for drinking, due to the amount of toxins leached into the groundwater and land. Hazardous threats to environment and human health due to hazardous substances of e-waste all around China, as well as the current e-waste management were documented in this review. The article concludes with controlled contamination sources, and eco-friendly and efficient remediation technologies to solve e-waste problem in China.

Recycling Waste Electrical and Electronic Equipment (WEEE) and the Management of Its Toxic Substances in Taiwan-A Case Study

In the past two decades, the waste electrical and electronic equipment (WEEE) management has become an important environmental issue internationally because it contained hazardous substances like heavy metals and brominated flame retardants. Moreover, some valuable substances were used in the electrical and electronic products, thus representing a circular industry for recycling of WEEE. Therefore, the Taiwan government formulated a legal WEEE recycling system since 1998 in response to the international trends of sustainable waste management and extended producer responsibility (EPR). This article adopted the national statistics in Taiwan regarding the online reporting amounts of collected WEEE since it has been officially designated as one of the mandatory recyclable wastes. Furthermore, the regulatory measures were addressed to update the status and subsidiary fee rates of WEEE recycling in Taiwan. In addition, this article also put emphasis on the regulations governing the toxic chemical substances contained in the WEEE. It showed that the average annual recycling amounts of home electronic appliances, information technology products and lighting in Taiwan during the 2017–2018 were around 117,000, 18,000 and 4500 metric tons, respectively. It was also indicated that the current WEEE recycling market in Taiwan has become saturated, reflecting the regulatory promulgation and promotional measures successfully. In response to the Stockholm Convention on persistent organic pollutants (POPs) and the Minamata Convention on Mercury, the Taiwan government declared some brominated flame retardants and heavy metals (i.e., mercury and cadmium) as a “toxic chemical substance” under the Toxic and Concerned Chemical Substance Control Act (TCCSCA), which shall be prohibited to use in the preparation of electrical and electronic equipment (EEE) since 1 January 2016. Through the central governing authority, local governments, and private recyclers in Taiwan, the successful WEEE recycling system not only reduce the pressure on sanitary disposal systems, but also prevent the chemical hazards from solid waste incineration systems. More significantly, the WEEE recycling in Taiwan echoed the United Nations (UN) Agenda 2030 for sustainable development goals.

Inconsistencies of e-waste management in developing nations - Facts and plausible solutions

Electronic and electrical equipment (EEE) became an integral part of daily life and had an immense influence on the economy. The skyrocketing demand, progressive technologies, and high dependency resulted in inconceivable utilization of EEE. However, these scientific expansions shortened the life span of EEE, thereby generating massive volumes of waste electronic and electrical equipment (WEEE). On a global perspective, Oceania generates a per capita of 17.3 kg/inh (inhabitants), followed by Europe 16.6 kg/inh, America 11.6 kg/inh, Asia 4.2 kg/inh and the least contribution by Africa 1.9 kg/inh. As known, EEE comprises complex metallic and non-metallic fractions causing severe discrepancies within the ecosystem, endangering the living species; if not dealt with properly. Thus, there is a pressing need of immediate addressal on the effective e-waste management strategies both from developed and developing countries. On the spin side, the separation of the precious fractions from the EEE on the end-of-life may be a twin dimensional strategy of economic addition, and plummeting the alarming level threats to ecology. However, these menaces are well tackled by the developed countries to some extent by the stringent law enactments, establishing proper recycling facilities, and trading to the underdeveloped and developing nations. But, the majority of the developing and under developed nations lacks the statutes, gaps in policy making, socio-economic-cultural barriers, technology, and the appropriate treatment facilities. In addition, the review identified ten major shortfalls (10L's) refraining the effective e-waste management, especially in the developing and under developed nations. Among which, integration of the formal and informal sectors, mandated network registry, stringent law enforcements, regulated transboundary movements, manufacturers responsibility, consumer awareness and improved eco designs, investing on effective recycling facilities, and improved disposal facilities holds the key. Further, replacing the traditional and conventional procedures with the futuristic and eco-friendly approaches such as chelation, inducing ionic liquids, integrated processes or hybrid technologies, micro factories, photo catalysis, and green adsorption will substantially harness the current barriers of the e-waste management. Finally, the present review will be a thorough glancing for the future research of e-waste management of meso-micro-macro scales.

Recovery of palladium and silver from waste multilayer ceramic capacitors by eutectic capture process of copper and mechanism analysis

Recycling waste multilayer ceramic capacitors (MLCCs) is significant for environmental protection and resource recovery, which contain rich precious metals including palladium and silver. The existing recycling methods have many shortcomings such as environmental pollution, low recovery efficiency and low purity of precious metals. In view of the special structure of MLCCs and low content of precious metals per unit mass, a novel approach of enrichment for recovering palladium and silver from waste MLCCs by eutectic capture process of copper was proposed, in which process precious metals were separated and enriched for subsequent recovery. The recovery rates of palladium and silver reached 100 % and 87.53 %, respectively under the optimal condition. And the enrichment multiples of palladium and silver were 13.16 and 7.37. The Cu-Pd-Ag alloy was formed in the capture process, of which palladium and copper formed Cu-Pd solid solution, while silver was a separate phase through the analysis of SEM-EDS, XPS and XRD. Besides, the molten residue can be reused to prepare glass-ceramics. Finally, the mechanism was analyzed through thermodynamics, which was divided into two processes: migration of precious metals and alloy formation. This study provides a highly efficient and environmentally friendly method for recycling precious metals from waste MLCCs.

Assessing enablers of e-waste management in circular economy using DEMATEL method: An Indian perspective

With increasing population, excessive use of electrical and electronic products and extreme demand of resources have compelled the linear economy to transform into Circular Economy (CE). In the current scenario, e-waste management has become the top priority of all the developed and developing nations especially those in the transition phase. The generation of e-waste has increased proportionally across the world and created an intense pressure on the firms to implement sustainable practices to redesign and recycle the products. The current status of the developing countries like India confronts number of challenges to manage e-waste produced, and the only possible solution is to minimize the waste generation and practicing recycling processes. For transforming into CEs, there is a need to identify the most influencing key enablers through which an effective and robust e-waste management (e-WM) system can be developed. An extensive literature review and expert judgments are expended to identify the most influencing key enablers of e-WM in circular economies, and, being the highest producer of e-waste, Mumbai (Maharashtra) has been chosen as the case location. To explore the strength of causal and effect enablers, the DEMATEL method is applied. This study has shown that 'Environmental management system' (EMS) is the most significant and important driving enabler to influence all the other existing enablers. This study has also highlighted that e-WM can be efficient if it focuses on producing eco-friendly products, developing strict legislations, building green image and supporting the producers to implement CE practices. This study helps stakeholders and policy makers to reduce the burden from the environment and focus on developing an efficient e-WM system on the basis of identified key enablers like EMS and collaboration with environmental partners to contribute towards CE transition.

Potential of electronic waste recycling in Gulf Cooperation Council states: an environmental and economic analysis

This paper for the first time aims to valorize the environmental and economic values of electronic waste recycling for member states of the Gulf Cooperation Council (GCC) from the year 2018 up to 2040. GCC countries have a unique situation due to the significant economic growth with the resulting urbanization and population growth accompanied by high standards of living that in turn increase all types of waste. A direct link among the living standards and quantity of electronic waste production is observed in the GCC states. The annual growth of electronic waste in GCC is 3-5% while the current estimated electronic waste generation exceeds 52.2 million metric tonnes (Mt). In 2018, GCC states generated 857 kilotonnes (kt) electronic waste that would be 1.094 Mt by 2040. KSA, among the GCC states, generated the highest amount of electronic waste (533 kt) in 2018 that would be 675 kt by 2040. GCC countries are on the right track of developing policies and regulations for managing electronic waste. However, more efforts are required to ensure the implementation of these regulations. The findings of this study would be a base for the future studies in the electronic waste sector in the GCC region and a novel initiative for GCC to develop a unified free zone for the electronic waste recycling that will meet the local, regional, and international standards and regulations. This unified GCC initiative has substantial economic and environmental benefits for the region.

Removal of heavy metals from water sources in the developing world using low-cost materials: A review

Heavy metal contamination is a growing concern in the developing world. Inadequate water and wastewater treatment, coupled with increased industrial activity, have led to increased heavy metal contamination in rivers, lakes, and other water sources in developing countries. However, common methods for removing heavy metals from water sources, including membrane filtration, activated carbon adsorption, and electrocoagulation, are not feasible for developing countries. As a result, a significant amount of research has been conducted on low-cost adsorbents to evaluate their ability to remove heavy metals. In this review article, we summarize the current state of research on the removal of heavy metals with an emphasis on low-cost adsorbents that are feasible in the context of the developing world. This review evaluates the use of adsorbents from four major categories: agricultural waste; naturally-occurring soil and mineral deposits; aquatic and terrestrial biomass; and other locally-available waste materials. Along with a summary of the use of these adsorbents in the removal of heavy metals, this article provides a summary of the influence of various water-quality parameters on heavy metals and these adsorbents. The proposed adsorption mechanisms for heavy metal removal are also discussed.

Behavioral game and simulation analysis of extended producer responsibility system's implementation under environmental regulations

The implementation of the extended producer responsibility (EPR) for e-waste is an important measure to develop an ecological civilization. In order to advance manufacturing enterprises to effectively implement resource and environmental responsibility, this study investigates the main causes of environmental regulation failure from the perspective of government and enterprises. The game theory was used to establish an evolutionary game model between government regulatory departments and electronic and electrical products' manufacturing enterprises. A system dynamic model was utilized to construct the stock-flow graph of the game between government and enterprises, and to carry out simulation analysis under different strategies. The results found that the probability of an enterprise undertaking extended responsibility gradually increased and stabilized with the increase of government supervision and punishment intensity; the government's regulatory probability and punishment are important factors affecting the enterprises' compliance with regulations and responsibilities. The study suggests that government should focus on strengthening environmental regulations from the aspects of improving laws and regulations, establishing a regular monitoring system and innovating incentive and constraint mechanism.

Estimating the Evolution of Urban Mining Resources in Hong Kong, Up to the Year 2050

Rapid urban metabolism is causing many resources to flow from consumption to waste. But many of these wastes could be secondary resources, and cities could become urban mines and an increasing supply of future resources. Hong Kong, one of the most developed and populated cities in the world, has demonstrated a completely metabolic evolution to be an urban mine, since the 1970s. Covering 14 types of e-waste and eight types of end-of-life vehicles, this study first investigates Hong Kong's evolution as an urban mine. The potential output weight of the urban mine quickly grew from 117 kt in 2000 to 368 kt in 2014, and it is estimated to remain in the range of 300-350 kt over the years 2015-2050, with 40-50 kg/cap/year. The economic potential of urban mining, for 18 metals, plastic, glass, and rubber tires, will be approximately US$2 billion annually, mainly contributed by precious and rare metals. All the obtained results contribute to Hong Kong's waste management and promise to have positive impact on urban mining and circular economy for other, less-developed cities or regions.

E-waste in the international context - A review of trade flows, regulations, hazards, waste management strategies and technologies for value recovery

E-waste, or waste generated from electrical and electronic equipment, is considered as one of the fastest-growing waste categories, growing at a rate of 3-5% per year in the world. In 2016, 44.7 million tonnes of e-waste were generated in the world, which is equivalent to 6.1 kg for each person. E-waste is classified as a hazardous waste, but unlike other categories, e-waste also has significant potential for value recovery. As a result it is traded significantly between the developed and developing world, both as waste for disposal and as a resource for metal recovery. Only 20% of global e-waste in 2016 was properly recycled or disposed of, with the fate of the remaining 80% undocumented - likely to be dumped, traded or recycled under inferior conditions. This review paper provides an overview of the global e-waste resource and identifies the major challenges in the sector in terms of generation, global trade and waste management strategies. It lists the specific hazards associated with this type of waste that need to be taken into account in its management and includes a detailed overview of technologies employed or proposed for the recovery of value from e-waste. On the basis of this overview the paper identifies future directions for effective e-waste processing towards sustainable waste/resource management. It becomes clear that there is a strong divide between developed and developing countries with regard to this sector. While value recovery is practiced in centralised facilities employing advanced technologies in a highly regulated industrial environment in the developed world, in the developing world such recovery is practiced in a largely unregulated artisanal industry employing simplistic, labour intensive and environmentally hazardous approaches. Thus value is generated safely in the hi-tech environment of the developed world, whereas environmental burdens associated with exported waste and residual waste from simplistic processing remain largely in developing countries. It is argued that given the breadth of available technologies, a more systematic evaluation of the entire e-waste value chain needs to be conducted with a view to establishing integrated management of this resource (in terms of well-regulated value recovery and final residue disposal) at the appropriately local rather than global scale.

Solvent-based separation and recycling of waste plastics: A review

Since the creation of first man-made plastic, the global production and consumption of plastics have been continuously increasing. However, because plastic materials are durable and very slow to degrade, they become waste with high staying power. The over-consumption, disposal, and littering of plastics result in pollution, thus causing serious environmental consequences. To date, only a fraction of waste plastics is reused and recycled. In fact, recycling plastics remains a great challenge because of technical challenges and relatively insufficient profits, especially in mixed plastics. This review focuses on an environmentally friendly and potentially profitable method for plastics separation and recovery and solvents extraction. It includes the dissolution/reprecipitation method and supercritical fluid extraction, which produce high-quality recovered plastics comparable to virgin materials. These methods are summarized and discussed taking mass-produced plastics (PS, PC, Polyolefins, PET, ABS, and PVC) as examples. To exploit the method, the quality and efficiency of solvent extraction are elaborated. By eliminating these technical challenges, the solvent extraction method is becoming more promising and sustainable for plastic issues and polymer markets.

A novel method for the removal of epoxy coating from waste printed circuit board

The printed circuit board, which is the heart of all electronic devices, is a rich source of metal, which could act as a future resource. Bioleaching, a biological treatment, would be an appropriate method for the environmentally sound management of e-waste. Various strippers are used to remove the epoxy coating and it is harmful to remove the epoxy coating with those solvents and salts in the open because of the presence of brominated flame retardants on the surface of the printed circuit board, which leads to serious health issues. An alternate process is required to remove the epoxy coating thereby enhancing the bioleaching process. Sonication is the process of applying sound energy to agitate particles in a solvent bath. The combined process of sonication and solvent stripping in a closed environment could decrease the time for stripping the epoxy coating. An attempt has been made to optimise the stripping agent for the removal of epoxy coating and from the experiment it was found that bath sonication could easily remove the epoxy coating from the waste printed circuit board with no emission of toxic gases. An optimum time of 5 min was enough for the stripping process prior to the soak time of 8 h at 5 N NaOH solution, while a longer time and high concentration of chemicals would be required to remove the epoxy coating with usual methods.

Status of electronic waste recycling techniques: a review

The increasing use of electrical and electronic equipment leads to a huge generation of electronic waste (e-waste). It is the fastest growing waste stream in the world. Almost all electrical and electronic equipment contain printed circuit boards as an essential part. Improper handling of these electronic wastes could bring serious risk to human health and the environment. On the other hand, proper handling of this waste requires a sound management strategy for awareness, collection, recycling, and reuse. Nowadays, the effective recycling of this type of waste has been considered as a main challenge for any society. Printed circuit boards (PCBs), which are the base of many electronic industries, are rich in valuable heavy metals and toxic halogenated organic substances. In this review, the composition of different PCBs and their harmful effects are discussed. Various techniques in common use for recycling the most important metals from the metallic fractions of e-waste are illustrated. The recovery of metals from e-waste material after physical separation through pyrometallurgical, hydrometallurgical, or biohydrometallurgical routes is also discussed, along with alternative uses of non-metallic fraction. The data are explained and compared with the current e-waste management efforts done in Egypt. Future perspectives and challenges facing Egypt for proper e-waste recycling are also discussed.

Influence of acrylonitrile butadiene rubber on recyclability of blends prepared from poly(vinyl chloride) and poly(methyl methacrylate)

The current investigation deals with the recycling possibilities of poly(vinyl chloride) and poly(methyl methacrylate) in the presence of acrylonitrile butadiene rubber. Recycled blends of poly(vinyl chloride)/poly(methyl methacrylate) are successfully formed from the plastic constituents, those are recovered from waste computer products. However, lower impact performance of the blend and lower stability of the poly(vinyl chloride) phase in the recycled blend restricts its further usage in industrial purposes. Therefore, effective utilisation acrylonitrile butadiene rubber in a recycled blend was considered for improving mechanical and thermal performance. Incorporation of acrylonitrile butadiene rubber resulted in the improvement in impact performance as well as elongation-at-break of the recycled blend. The optimum impact performance was found in the blend with 9 wt% acrylonitrile butadiene rubber, which shows 363% of enhancement as compared with its parent blend. Moreover, incorporated acrylonitrile butadiene rubber also stabilises the poly(vinyl chloride) phase present in the recycled blend, similarly Fourier transform infrared spectroscopy studies indicate the interactions of various functionalities present in the recycled blend and acrylonitrile butadiene rubber. In addition to this, thermogravimetric analysis indicates the improvement in the thermal stability of the recycled blend after the addition of acrylonitrile butadiene rubber into it. The existence of partial miscibility in the recycled blend was identified using differential scanning calorimetry and scanning electron microscopy.

A device-specific prioritization strategy based on the potential for harm to human health in informal WEEE recycling

In developing countries, the recovery of valuable materials from Waste Electrical and Electronic Equipment (WEEE) is carried out via uncontrolled practices, posing potentially severe risks both to human health and the environment. The assessment of the risk, which depends on both the kind and hazardous properties of the substances contained in WEEE, is currently limited as the exposure scenario for the single informal practice cannot be fully characterized for this purpose. In this context, this work proposes and evaluates a strategy to identify the relative potential harm of different kinds of WEEE by their content in metals, selected as the target substances of concern. This was based on the individual metal content, primarily located in the printed circuit boards (PCBs) of the different devices. The metal composition of the individual PCBs was identified and the dominant unregulated metal recovery practices were reviewed to identify the most suitable parameter to express the toxicity of these metals. Based on a mass-normalized cumulative toxicity, via the inhalation route, individual components were assessed from compositional variation found in the literature. The results is a semiquantitative ranking of individual components, revealing significant differences in potential harm posed by different electronic appliances and an opportunity to provide prioritization strategies in future management.

Informal E-waste recycling in developing countries: review of metal(loid)s pollution, environmental impacts and transport pathways

Crude or primitive recycling practices are often adopted in material resource recovery from E-waste in developing nations. Significant human health and environmental impacts may occur because of such practices. Literature on metal(loid)s pollution during E-waste processing is fragmented. Here, I review the health and environmental impacts of E-waste recycling operations and transport pathways of metal(loid)s, dispersed during operations. This paper is organised into five sections. Section 1 relates to the background of global E-waste generation and legal/illegal trade, citing specific cases from Ghana and other developing nations. Section 2 provides a brief information on sources of metal(loid)s in E-waste. Section 3 describes characteristics of informal E-waste recycling operations in developing nations. Section 4 examines the health and environmental impacts in E-waste recycling while section 5 evaluates major transport pathways of metal(loid)s contaminants.

Environmental impacts and benefits of state-of-the-art technologies for E-waste management

This study aims to evaluate the environmental impacts and benefits of state-of-the-art technologies for proper e-waste handling using Jordan as a case study. Life Cycle Assessment (LCA) was employed to evaluate five advanced management systems represent state-of-the-art treatment technologies, including sanitary landfilling; proper recycling of metals, materials, and precious metals (PMs); and incineration of plastic and the hazardous portion of printed circuit boards (PCBs). Six e-waste products that contribute the most to the e-waste in Jordan were included in the assessment of each scenario, which resulted in 30 total cases of e-waste management. The findings indicated that landfills for the entire components of the e-waste stream are the worst option and should be avoided. The most promising e-waste management scenario features integrated e-waste processes based on the concept of Integrated Waste Management (IWM), including recycling materials such as non-PMs and PMs, incinerating plastic and the hazardous content of PCBs using the energy recovered from incineration, and using sanitary landfills of residues. For this scenario, the best environmental performance was obtained for the treatment of mobile phones. Incineration of the portion of hazardous waste using energy recovery is an option that deserves attention. Because scenario implementation depends on more than just the environmental benefits (e.g., economic cost and technical aspects), the study proposes a systematic approach founded on the IWM concept for e-waste management scenario selection.

Exploring the Awareness Regarding E-waste and its Health Hazards among the Informal Handlers in Musheerabad Area of Hyderabad

Introduction

Occupational Health hazards of handling and management of electronic waste is a nascent subject. Improper and unscientific handling of e-waste can invite significant human and environmental health risks.

Objective

To study the level of awareness about electronic waste and its health hazards amongst informal handlers in Musheerabad, Hyderabad.

Methodology

Ethical approval and informed consents were obtained from Institutional Ethical Committee, University of Hyderabad and from the participants respectively before the commencement of study. This was a descriptive cross-sectional study conducted in randomly selected twenty-six waste handling centers from sixty of them in the locality. From each of the centers four handlers agedbetween 18 and 45 were randomly selected. Total of 104 handlers were interviewed using semi-structured schedule. Interviews were also conducted among 10 owners of such centres on the waste management practices.

Results

About 72% of the handlers did not know the meaning of electronic waste and 71% were not aware of associated health risks, 85% did not use any protective gears, while 16% acknowledged health issues attributed to improper handling of e-waste, 77% felt their handling of e-waste was appropriate. Majority of center owners felt that informal e-waste handling does not pose any health risks, and reported that there was no awareness campaign by any agency as of then.

Conclusion

This study highlights the need for awareness campaigns on proper e-waste management practices to ensure occupational safety among the waste handlers who belong to lower socio-economic strata.

Kinetics of Brominated Flame Retardant (BFR) Releases from Granules of Waste Plastics

Plastic components of e-waste contain high levels of brominated flame retardants (BFRs), whose releases cause environmental and human health concerns. This study characterized the release kinetics of polybrominated diphenyl ethers (PBDEs) from millimeter-sized granules processed from the plastic exteriors of two scrap computer displays at environmentally relevant temperatures. The release rate of a substitute of PBDEs, 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE), from the waste plastics, was reported for the first time. Deca-BDE was the most abundant PBDE congeners in both materials (87-89%), while BTBPE was also present at relatively high contents. The release kinetics of BFRs could be modeled as one-dimensional diffusion, while the temperature dependence of diffusion coefficients was well described by the Arrhenius equation. The diffusion coefficients of BFRs (at 30 °C) in the plastic matrices were estimated to be in the range of 10^-27.16 to 10^-19.96 m²·s^-1, with apparent activation energies between 88.4 and 154.2 kJ·mol^-1. The half-lives of BFR releases (i.e., 50% depletion) from the plastic granules ranged from thousands to tens of billions of years at ambient temperatures. These findings suggest that BFRs are released very slowly from the matrices of waste plastics through molecular diffusion, while their emissions can be significantly enhanced with wear-and-tear and pulverization.