A Multicomponent Microneedle Patch for the Delivery of Meloxicam for Veterinary Applications

This study evaluates the use of poly(vinyl alcohol), collagen, and chitosan blends for developing a microneedle patch for the delivery of meloxicam (MEL). Results confirm successful MEL encapsulation, structural integrity, and chemical stability even after ethylene oxide sterilization. Mechanical testing indicates the patch has the required properties for effective skin penetration and drug delivery, as demonstrated by load-displacement curves showing successful penetration of pig ear surfaces at 3N of normal load. In vitro imaging confirms the microneedle patch penetrates the pig's ear cadaver skin effectively and uniformly, with histological evaluation revealing the sustained presence and gradual degradation of microneedles within the skin. Additionally, in vitro drug diffusion experiments utilizing ballistic gel suggest that microneedles commence dissolution almost immediately upon insertion into the gel, steadily releasing the drug over 24 h. Furthermore, the microneedle patch demonstrates ideal drug release capabilities, achieving nearly 100% release of meloxicam content from a single patch within 18 h. Finally, in vivo studies using pigs demonstrate the successful dissolution and transdermal drug delivery efficacy of biodegradable microneedle patches delivering meloxicam in a porcine model, with over 70% of microneedles undergoing dissolution after 3 days. While low detectable meloxicam concentrations were observed in the bloodstream, high levels were detected in the ear tissue, confirming the release and diffusion of the drug from microneedles. This work highlights the potential of microneedle patches for controlled drug release in veterinary applications.

Toxicity of water-soluble polymers polyethylene glycol and polyvinyl alcohol for fish and frog embryos

Personal Care Products (PCPs) have been one of the most studied chemicals in the last twenty years since they were identified as pseudo-persistent pollutants by the European Union in the early 2000s. The accumulation of PCPs in the aquatic environment and their effects on non-target species make it necessary to find new, less harmful, substances. Polyethylene glycol (PEGs) and polyvinyl alcohol (PVAs) are two polymers that have increased their presence in the composition of PCPs in recent years, but little is known about the effect of their accumulation in the environment on non-target species. Through embryotoxicity tests on two common models of aquatic organisms (Danio rerio and Xenopus laevis), this work aims to increase the knowledge of PEGs and PVAs' effects on non-target species. Animals were exposed to the pollutant for 96 h. The main embryotoxicity endpoint (mortality, hatching, malformations, heartbeat rate) was recorded every 24 h. The most significant results were hatching delay in Danio rerio exposed to both chemicals, in malformations (oedema, body malformations, changes in pigmentation and deformations of spine and tail) in D. rerio and X. laevis and significant change in the heartbeat rate (decrease or increase in the rate) in both animals for all chemicals tested.

Soft and flexible polyvinyl alcohol/pullulan aerogels with fast and high water absorption capacity for facial mask substrates

Facial mask substrates commonly used in skincare are often considered unhealthy and environmentally unfriendly due to their composition of premoistened nonwovens containing various preservatives. This study aims to address this issue by developing a preservative-free degradable aerogel made from polyvinyl alcohol (PVA)/pullulan (PUL) using a unidirectional freeze-drying method. The aerogels had ordered three-dimensional porous structures and exhibited desirable mechanical properties. They were soft and flexible in both dry and wet states, and their Young's moduli were comparable to that of human skin. The aerogels had high porosity, ranging from 93.0 % to 95.1 %, and exhibited a high water absorption rate and water absorption capacity (ranging from 7.5 g/g to 10.1 g/g). After 30 min of water evaporation, the aerogels showed excellent moisture retention, ranging from 88 % to 93 %. Additionally, the PVA/PUL aerogel efficiently loaded and released active ingredients, such as rapidly releasing ascorbic acid (> 90 % within 30 min). These findings suggest that the PVA/PUL aerogel has potential as a material for facial mask substrates.

Composite Cryogels Based on Hydroxyapatite and Polyvinyl Alcohol and the Study of Physicochemical and Mechanical Properties

Nowadays, due to the increasing number of diseases and injuries related to bone tissue, there is an acute problem of creating a material that could be incorporated into the bone tissue structure and contribute to accelerated bone regeneration. Such materials can be represented by a polymeric matrix that holds the material in the bone and an inorganic component that can be incorporated into the bone structure and promote accelerated bone regeneration. Therefore, in this work we investigated polyvinyl alcohol-based composite cryogels containing an in situ deposited inorganic filler, hydroxyapatite. The freezing temperature was varied during the synthesis process. The composition of the components was determined by infrared spectroscopy and the phase composition by X-ray phase analysis, from which it was found that the main phase of the composite is hydroxyapatite and that the particle size decreases with increasing freezing temperature. The elemental composition of the surface is dominated by carbon, oxygen, phosphorus and calcium; no impurities of other elements not typical for polyvinyl alcohol/ hydroxyapatite cryogels were found. Higher mechanical properties and melting points were observed at -15 °C. Cryogenic treatment parameters did not affect cell viability; however, cell viability was above 80% in all samples.

Optimization of PLGA-DSPE hybrid nano-micelles with enhanced hydrophobic capacity for curcumin delivery

Poly (D, L Lactic-co-Glycolic acid) (PLGA) is an FDA-approved polymer. It is distinguished from other biocompatible polymers by its feasibility of production and safety for intravenous cancer tumor targeting. Curcumin (CUR) is a natural molecule with versatile bioactivities including inhibiting the nuclear Factor kappa B (Nf-kB) levels in cancer cells, increased by chemotherapy agents. Our group previously reported a successful decrease in the p65 (RelA) subunit of Nf-kB using 125 µg/ml CUR loaded into PLGA nano-micelles. However, this amount was insufficient to reduce all Nf-kB subunits. This study aimed to increase the hydrophobic capacity of PLGA toward CUR using 1,2-Distearoyl-sn-glycerol-3-phosphoethanolamine (DSPE), an FDA-approved phospholipid. PLGA-DSPE hybrid nano-micelles (HNM) were prepared using two different methods, oil-in-water (OiWa) and film preparation-rehydration (FiRe). The encapsulated CUR was successfully increased to 250 µg/ml using the FiRe method. Physicochemical characterization of CUR-loaded HNM was performed using DLS FT-IR, DSC, and HPLC. In HNM with a size of 156.6 nm, DSPE, incorporated with all functional groups of PLGA, and CUR was trapped in the core of this structure. The release profile of CUR was suitable for targeted cancer therapy and the Encapsulation Efficacy was 92%.

Quaternized chitosan (nano)fibers: A journey from preparation to high performance applications

The industrial production of chitosan, initiated over 50 years ago, has transformed its application across diverse industries, agriculture, and medicine. To enhance its properties, numerous chitosan derivatives have been synthesized. The quaternization of chitosan has proven beneficial, as it not only enhances its properties but also imparts water solubility, expanding its potential for a wider range of applications. Specifically, the utilization of quaternized chitosan-based nanofibers has leveraged the synergistic benefits of quaternized chitosan (including hydrophilicity, bioadhesiveness, antimicrobial, antioxidant, hemostatic, and antiviral activities, as well as ionic conductivity) in combination with the distinctive characteristics of nanofibers (such as a high aspect ratio and 3D architecture). This combination has permitted numerous possibilities, spanning from wound dressings, air and water filters, drug delivery scaffolds, antimicrobial textiles, to energy storage systems and alkaline fuel cells. In this comprehensive review, we examine the preparation methods, properties, and applications of various composite fibers containing quaternized chitosan. The advantages and disadvantages of each method and composition are meticulously summarized, while relevant diagrams and figures illustrate the key findings.

Design and Evaluation of Dissolvable Microneedles for Treating Atopic Dermatitis

Atopic dermatitis (AD) is a chronic inflammatory skin disease caused predominantly by immune dysregulation. The global impact of AD continues to increase, making it not only a significant public health issue but also a risk factor for progression into other allergic phenotype disorders. Treatment of moderate-to-severe symptomatic AD involves general skin care, restoration of the skin barrier function, and local anti-inflammatory drug combinations, and may also require systemic therapy, which is often associated with severe adverse effects and is occasionally unsuitable for long-term use. The main objective of this study was to develop a new delivery system for AD treatment based on dissolvable microneedles containing dexamethasone incorporated in a dissolvable polyvinyl alcohol/polyvinylpyrrolidone matrix. SEM imaging of the microneedles showed well-structured arrays comprising pyramidal needles, fast drug release in vitro in Franz diffusion cells, an appropriate mechanical strength recorded with a texture analyzer, and low cytotoxicity. Significant clinical improvements, including in the dermatitis score, spleen weights, and clinical scores, were observed in an AD in vivo model using BALB/c nude mice. Taken together, our results support the hypothesis that microneedle devices loaded with dexamethasone have great potential as a treatment for AD and possibly for other skin conditions as well.

Nanoparticles of VAV1 siRNA combined with LL37 peptide for the treatment of pancreatic cancer

Pancreatic ductal adenocarcinoma (PDAC) is among the leading causes of cancer-related death, and it is highly resistant to therapy owing to its unique extracellular matrix. VAV1 protein, overexpressed in several cancer diseases including pancreatic cancer (PC), increases tumor proliferation and enhances metastases formation, which are associated with decreased survival. We hypothesized that an additive anti-tumor effect could be obtained by co-encapsulating in PLGA nanoparticles (NPs), the negatively charged siRNA against VAV1 (siVAV1) with the positively charged anti-tumor LL37 peptide, as a counter-ion. Several types of NPs were formulated and were characterized for their physicochemical properties, cellular internalization, and bioactivity in vitro. NPs' biodistribution, toxicity, and bioactivity were examined in a mice PDAC model. An optimal siVAV1 formulation (siVAV1-LL37 NPs) was characterized with desirable physicochemical properties in terms of nano-size, low polydispersity index (PDI), neutral surface charge, high siVAV1 encapsulation efficiency, spherical shape, and long-term shelf-life stability. Cell assays demonstrated rapid engulfment by PC cells, a specific and significant dose-dependent proliferation inhibition, as well as knockdown of VAV1 mRNA levels and migration inhibition in VAV1⁺ cells. Treatment with siVAV1-LL37 NPs in the mice PDAC model revealed marked accumulation of NPs in the liver and in the tumor, resulting in an increased survival rate following suppression of tumor growth and metastases, mediated via the knockdown of both VAV1 mRNA and protein levels. This proof-of-concept study validates our hypothesis of an additive effect in the treatment of PC facilitated by co-encapsulating siVAV1 in NPs with LL37 serving a dual role as a counter ion as well as an anti-tumor agent.

Investigating transmission of SARS-CoV-2 using novel face mask sampling: a protocol for an observational prospective study of index cases and their contacts in a congregate setting

INTRODUCTION

This study aims to measure how transmission of SARS-CoV-2 occurs in communities and to identify conditions that lend to increased transmission focusing on congregate situations. We will measure SARS-CoV-2 in exhaled breath of asymptomatic and symptomatic persons using face mask sampling-a non-invasive method for SARS-CoV-2 detection in exhaled air. We aim to detect transmission clusters and identify risk factors for SARS-CoV-2 transmission in presymptomatic, asymptomatic and symptomatic individuals.

METHODS AND ANALYSIS

In this observational prospective study with daily follow-up, index cases and their respective contacts are identified at each participating institution. Contact definitions are based on Centers for Disease Control and Prevention and local health department guidelines. Participants will wear masks with polyvinyl alcohol test strips adhered to the inside for 2 hours daily. The strips are applied to all masks used over at least 7 days. In addition, self-administered nasal swabs and (optional) finger prick blood samples are performed by participants. Samples are tested by standard PCR protocols and by novel antigen tests.

ETHICS AND DISSEMINATION

This study was approved by the Colorado Multiple Institutional Review Board and the WHO Ethics Review Committee. From the data generated, we will analyse transmission clusters and risk factors for transmission of SARS-CoV-2 in congregate settings. The kinetics of asymptomatic transmission and the evaluation of non-invasive tools for detection of transmissibility are of crucial importance for the development of more targeted control interventions-and ultimately to assist with keeping congregate settings open that are essential for our social fabric.

TRIAL REGISTRATION NUMBER

ClinicalTrials.gov (#NCT05145803).

Additive Manufacturing of Drug-Eluting Multilayer Biodegradable Films

Drug-eluting films made of bioresorbable polymers are a widely used tool of modern personalized medicine. However, most currently existing methods of producing coatings do not go beyond the laboratory, as they have low encapsulation efficiency and/or difficulties in scaling up. The PLACE (Printed Layered Adjustable Cargo Encapsulation) technology proposed in this article uses an additive approach for film manufacturing. PLACE technology is accessible, scalable, and reproducible in any laboratory. As a demonstration of the technology capabilities, we fabricated layered drug-eluting polyglycolic acid films containing different concentrations of Cefazolin antibiotic. The influence of the amount of loaded drug component on the film production process and the release kinetics was studied. The specific loading of drugs was significantly increased to 200-400 µg/cm² while maintaining the uniform release of Cefazolin antibiotic in a dosage sufficient for local antimicrobial therapy for 14 days. The fact that the further increase in the drug amount results in the crystallization of a substance, which can lead to specific defects in the cover film formation and accelerated one-week cargo release, was also shown, and options for further technology development were proposed.

Electrospinning of chitosan-based nanofibers: from design to prospective applications

Chitosan is a biopolymer originating from renewable resources, with great properties which make it an attractive candidate for plenty of applications of contemporary interest. By manufacturing chitosan into nanofibers using the electrospinning method, its potential is amplified due to the enhancement of the active surface and the low preparation cost. Many attempts were made with the aim of preparing chitosan-based nanofibers with controlled morphology targeting their use for tissue engineering, wound healing, food packaging, drug delivery, air and water purification filters. This was a challenging task, which resulted in a high amount of data, sometimes with apparent contradictory results. In this light, the goal of the paper is to present the main routes reported in the literature for chitosan electrospinning, stressing the advantages and disadvantages of each of them. Special emphasis is placed on the influence of various electrospinning parameters on the morphological characteristics of the fibers and their suitability for distinct applications.

Bacillus subtilis in PVA Microparticles for Treating Open Wounds

Open wound dressings should provide a moist environment, protect the wound from bacterial contamination, and shield it from further damage. These requirements, however, are hard to accomplish since such wounds are colonized by pathogenic bacteria, including resistant species such as methicillin-resistant Staphylococcus aureus (MRSA). A new approach for treating open wounds that is based on sticky and dissolvable polyvinyl alcohol (PVA) microparticles containing live Bacillus subtilis (B. subtilis) is described. Microparticles, fabricated by the spray-drying technique, were administered directly to an open wound while B. subtilis continuously produced and secreted antimicrobial molecules. B. subtilis in PVA microparticles demonstrated remarkable antibacterial activity against MRSA and S. aureus. In in vivo experiments, both B. subtilis and empty PVA microparticles were effective in decreasing healing time; however, B. subtilis microparticles were more effective during the first week. There was no evidence of skin irritation, infection, or other adverse effects during the 15 day postoperative observation period. This concept of combining live secreting bacteria within a supportive delivery system shows great promise as a therapeutic agent for open wounds and other infectious skin disorders.

Bioprinting Via a Dual-Gel Bioink Based on Poly(Vinyl Alcohol) and Solubilized Extracellular Matrix towards Cartilage Engineering

Various hydrogel systems have been developed as biomaterial inks for bioprinting, including natural and synthetic polymers. However, the available biomaterial inks, which allow printability, cell viability, and user-defined customization, remains limited. Incorporation of biological extracellular matrix materials into tunable synthetic polymers can merge the benefits of both systems towards versatile materials for biofabrication. The aim of this study was to develop novel, cell compatible dual-component biomaterial inks and bioinks based on poly(vinyl alcohol) (PVA) and solubilized decellularized cartilage matrix (SDCM) hydrogels that can be utilized for cartilage bioprinting. In a first approach, PVA was modified with amine groups (PVA-A), and mixed with SDCM. The printability of the PVA-A/SDCM formulations cross-linked by genipin was evaluated. On the second approach, the PVA was functionalized with cis-5-norbornene-endo-2,3-dicarboxylic anhydride (PVA-Nb) to allow an ultrafast light-curing thiol-ene cross-linking. Comprehensive experiments were conducted to evaluate the influence of the SDCM ratio in mechanical properties, water uptake, swelling, cell viability, and printability of the PVA-based formulations. The studies performed with the PVA-A/SDCM formulations cross-linked by genipin showed printability, but poor shape retention due to slow cross-linking kinetics. On the other hand, the PVA-Nb/SDCM showed good printability. The results showed that incorporation of SDCM into PVA-Nb reduces the compression modulus, enhance cell viability, and bioprintability and modulate the swelling ratio of the resulted hydrogels. Results indicated that PVA-Nb hydrogels containing SDCM could be considered as versatile bioinks for cartilage bioprinting.

Polyvinyl alcohol based-drug delivery systems for cancer treatment

Polyvinyl alcohol (PVA) is a biodegradable semicrystalline synthetic polymer that has been used for biomedical applications for several years. In the pharmaceutical area, PVA has been widely used to prepare solid dispersions to improve the solubility of drugs. Furthermore, it has been demonstrated that PVA is highly biocompatible and non-toxic in in-vitro and in-vivo studies. Several reports provided in this review suggest a promising strategy for cancer treatment. Thus far, the current therapy includes a combination of surgery, chemotherapy, and radiotherapy, the effectivity can be limited due to the heterogeneous manifestations of the disease, dose-related toxicity, and side effects. A promising strategy is the implementation of a targeted therapy using hydrogels, microparticles, or nanoparticles (NPs), capable of encapsulating, protecting, transporting, and targeted administration of a therapeutic agent. Considering the relevance of the PVA in conjunction with their copolymers, it has become a promising biodegradable material to build novel functional composites used in the fabrication of hydrogels, microparticles, nanoparticles, and nanocomposites for drug delivery systems in cancer treatment.

Microneedles with dual release pattern for improved immunological efficacy of Hepatitis B vaccine

In this study, dissolving microneedles (DMNs) with dual-release pattern, capable of both bolus release and slow release, were prepared. These DMNs were used with a hepatitis B vaccine that requires multiple shots to achieve immunological efficacy comparable to that obtained when two separate shots are administered. Dissolving microneedles with HBsAg in PLA tips and CMC coating formulation together (HBsAg-PLA/CMC-DMNs) consist of polylactic acid (PLA) tips for slow release, a carboxy-methyl cellulose (CMC) coating formulation for bolus release, and a dissolving base of polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP) for dissolution in the skin. The in vitro release pattern of HBsAg from the CMC coating formulation and PLA tips was observed. Through an in vivo test, 1) the delivery efficiency of HBsAg-PLA/CMC-DMNs was observed, and 2) the immunological efficacy of this method was compared with the efficacy of two shots delivered by conventional intramuscular (IM) administration and two shots delivered by HBsAg-coated microneedle (CMNs) administration. HBsAg-PLA/CMC-DMNs punctured the skin successfully. The PVA/PVP base was completely dissolved within 10 min of insertion, resulting in the delivery of all microneedle tips into the skin. In the in vitro release experiment, all of the HBsAg in the CMC coating formulation was released within 20 min, and the HBsAg present in the PLA tips was gradually released over more than 55 days. The antibody titer of one shot of HBsAg-PLA/CMC-DMNs was the same as or higher than two shots delivered by conventional IM and CMN methods. DMNs with dual-release pattern can deliver two formulations simultaneously with a single shot, resulting in improved immunological efficacy of HBsAg that requires multiple doses. In addition, this dual-release MN system can be used for the delivery of other drugs that require multiple administrations.

Biomaterials of PVA and PVP in medical and pharmaceutical applications: Perspectives and challenges

Poly(vinyl alcohol) (PVA) has attracted considerable research interest and is recognized among the largest volume of synthetic polymers that have been produced worldwide for almost one century. This is due to its exceptional properties which dictated its extensive use in a wide variety of applications, especially in medical and pharmaceutical fields. However, studies revealed that PVA-based biomaterials present some limitations that can restrict their use or performances. To overcome these limitations, various methods have been reported, among which blending with poly(vinylpyrrolidone) (PVP) showed promising results. Thus, our aim was to offer a systematic overview on the current state concerning the preparation, properties and various applications of biomaterials based on synergistic effect of mixtures between PVA and PVP. Future trends towards where the biomaterials research is headed were discussed, showing the promising opportunities that PVA and PVP can offer.

Polymer conjugated retinoids for controlled transdermal delivery

All-trans retinoic acid (ATRA), a derivative of vitamin A, is a common component in cosmetics and commercial acne creams as well as being a first-line chemotherapeutic agent. Today, formulations for the topical application of ATRA rely on creams and emulsions to incorporate the highly hydrophobic ATRA drug. These strategies, when applied to the skin, deliver ATRA as a single bolus, which is immediately taken up into the skin and contributes to many of the known adverse side effects of ATRA treatment, including skin irritation and hair loss. Herein we present a new concept in topical delivery of retinoids by covalently bonding the drug through a hydrolytically degradable ester linkage to a common hydrophilic polymer, polyvinyl alcohol (PVA), creating an amphiphilic nanomaterial that is water-soluble. This PVA bound ATRA can then act as a pro-drug and accumulate within the skin to allow for the sustained controlled delivery of active ATRA. This approach was demonstrated to release active ATRA out to 10days in vitro while significantly enhancing dermal accumulation of the ATRA in explant pig skin. In vivo we demonstrate that the pro-drug formulation reduces application site inflammation compared to free ATRA and retains the drug at the application site at measurable quantities for up to six days.

Bioresorbable surface-adhered enzymatic microreactors based on physical hydrogels of poly(vinyl alcohol)

Hydrogel biomaterials based on poly(vinyl alcohol), PVA, have an extensive history of biomedical applications, yet in their current form suffer from significant shortcomings, such as a lack of mechanism of biodegradation and poor opportunities in controlled drug release. We investigate physical hydrogels of PVA as surface-adhered materials and present biodegradable matrices equipped with innovative tools in substrate-mediated drug release. Toward the final goal, PVA chains with narrow polydispersities (1.1-1.2) and molecular weights of 5, 10, and 28 kDa are synthesized via controlled radical polymerization (RAFT). These molecular weights are shown to be suitably high to afford robust hydrogel matrices and at the same time suitably low to allow gradual erosion of the hydrogels with kinetics of degradation controlled via polymer macromolecular characteristics. For opportunities in controlled drug release, hydrogels are equipped with enzymatic cargo to achieve an in situ conversion of externally added prodrug into a final product, thus giving rise to surface-adhered enzymatic microreactors. Hydrogel-mediated enzymatic activity was investigated as a function of polymer molecular weight and concentration of solution taken for assembly of hydrogels. Taken together, we present, to the best of our knowledge, the first example of bioresorbable physical hydrogel based on PVA with engineered opportunities in substrate-mediated enzymatic activity and envisioned utility in surface-mediated drug delivery and tissue engineering.

Poly(vinyl alcohol) physical hydrogels: noncryogenic stabilization allows nano- and microscale materials design

Physical hydrogels based on poly(vinyl alcohol), PVA, have an excellent safety profile and a successful history of biomedical applications. However, highly inhomogeneous and macroporous internal organization of these hydrogels as well as scant opportunities in bioconjugation with PVA have largely ruled out micro- and nanoscale control and precision in materials design and their use in (nano)biomedicine. To address these shortcomings, herein we report on the assembly of PVA physical hydrogels via "salting-out", a noncryogenic method. To facilitate sample visualization and analysis, we employ surface-adhered structured hydrogels created via microtransfer molding. The developed approach allows us to assemble physical hydrogels with dimensions across the length scales, from ∼100 nm to hundreds of micrometers and centimeter sized structures. We determine the effect of the PVA molecular weight, concentration, and "salting out" times on the hydrogel properties, i.e., stability in PBS, swelling, and Young's modulus using exemplary microstructures. We further report on RAFT-synthesized PVA and the functionalization of polymer terminal groups with RITC, a model fluorescent low molecular weight cargo. This conjugated PVA-RITC was then loaded into the PVA hydrogels and the cargo concentration was successfully varied across at least 3 orders of magnitude. The reported design of PVA physical hydrogels delivers methods of production of functionalized hydrogel materials toward diverse applications, specifically surface mediated drug delivery.