Craniofacial tissue engineering by stem cells

Exosomes and exosome composite scaffolds in periodontal tissue engineering

Promoting complete periodontal regeneration of damaged periodontal tissues, including dental cementum, periodontal ligament, and alveolar bone, is one of the challenges in the treatment of periodontitis. Therefore, it is urgent to explore new treatment strategies for periodontitis. Exosomes generated from stem cells are now a promising alternative to stem cell therapy, with therapeutic results comparable to those of their blast cells. It has great potential in regulating immune function, inflammation, microbiota, and tissue regeneration and has shown good effects in periodontal tissue regeneration. In addition, periodontal tissue engineering combines exosomes with biomaterial scaffolds to maximize the therapeutic advantages of exosomes. Therefore, this article reviews the progress, challenges, and prospects of exosome and exosome-loaded composite scaffolds in periodontal regeneration.

Different Sources of Bone Marrow Mesenchymal Stem Cells: A Comparison of Subchondral, Mandibular, and Tibia Bone-derived Mesenchymal Stem Cells

BACKGROUND

Stem cell properties vary considerably based on the source and tissue site of mesenchymal stem cells (MSCs). The mandibular condyle is a unique kind of craniofacial bone with a special structure and a relatively high remodeling rate. MSCs here may also be unique to address specific physical needs.

OBJECTIVE

The aim of this study was to compare the proliferation and multidirectional differentiation potential among MSCs derived from the tibia (TMSCs), mandibular ramus marrow (MMSCs), and condylar subchondral bone (SMSCs) of rats in vitro.

METHODS

Cell proliferation and migration were assessed by CCK-8, laser confocal, and cell scratch assays. Histochemical staining and real-time PCR were used to evaluate the multidirectional differentiation potential and DNA methylation and histone deacetylation levels.

RESULTS

The proliferation rate and self-renewal capacity of SMSCs were significantly higher than those of MMSCs and TMSCs. Moreover, SMSCs possessed significantly higher mineralization and osteogenic differentiation potential. Dnmt2, Dnmt3b, Hdac6, Hdac7, Hdac9, and Hdac10 may be instrumental in the osteogenesis of SMSCs. In addition, SMSCs are distinct from MMSCs and TMSCs with lower adipogenic differentiation and chondrogenic differentiation potential. The multidirectional differentiation capacities of TMSCs were exactly the opposite of those of SMSCs, and the results of MMSCs were intermediate.

CONCLUSION

This research offers a new paradigm in which SMSCs could be a useful source of stem cells for further application in stem cell-based medical therapies due to their strong cell renewal and osteogenic capacity.

Towards resorbable 3D-printed scaffolds for craniofacial bone regeneration

This review will briefly examine the development of 3D-printed scaffolds for craniofacial bone regeneration. We will, in particular, highlight our work using Poly(L-lactic acid) (PLLA) and collagen-based bio-inks. This paper is a narrative review of the materials used for scaffold fabrication by 3D printing. We have also reviewed two types of scaffolds that we designed and fabricated. Poly(L-lactic acid) (PLLA) scaffolds were printed using fused deposition modelling technology. Collagen-based scaffolds were printed using a bioprinting technique. These scaffolds were tested for their physical properties and biocompatibility. Work in the emerging field of 3D-printed scaffolds for bone repair is briefly reviewed. Our work provides an example of PLLA scaffolds that were successfully 3D-printed with optimal porosity, pore size and fibre thickness. The compressive modulus was similar to, or better than, the trabecular bone of the mandible. PLLA scaffolds generated an electric potential upon cyclic/repeated loading. The crystallinity was reduced during the 3D printing. The hydrolytic degradation was relatively slow. Osteoblast-like cells did not attach to uncoated scaffolds but attached well and proliferated after coating the scaffold with fibrinogen. Collagen-based bio-ink scaffolds were also printed successfully. Osteoclast-like cells adhered, differentiated, and survived well on the scaffold. Efforts are underway to identify means to improve the structural stability of the collagen-based scaffolds, perhaps through mineralization by the polymer-induced liquid precursor process. 3D-printing technology is promising for constructing next-generation bone regeneration scaffolds. We describe our efforts to test PLLA and collagen scaffolds produced by 3D printing. The 3D-printed PLLA scaffolds showed promising properties akin to natural bone. Collagen scaffolds need further work to improve structural integrity. Ideally, such biological scaffolds will be mineralized to produce true bone biomimetics. These scaffolds warrant further investigation for bone regeneration.

Dissecting calvarial bones and sutures at single-cell resolution

Cranial bones constitute a protective shield for the vulnerable brain tissue, bound together as a rigid entity by unique immovable joints known as sutures. Cranial sutures serve as major growth centres for calvarial morphogenesis and have been identified as a niche for mesenchymal stem cells (MSCs) and/or skeletal stem cells (SSCs) in the craniofacial skeleton. Despite the established dogma of cranial bone and suture biology, technological advancements now allow us to investigate these tissues and structures at unprecedented resolution and embrace multiple novel biological insights. For instance, a decrease or imbalance of representation of SSCs within sutures might underlie craniosynostosis; dural sinuses enable neuroimmune crosstalk and are newly defined as immune hubs; skull bone marrow acts as a myeloid cell reservoir for the meninges and central nervous system (CNS) parenchyma in mediating immune surveillance, etc. In this review, we revisit a growing body of recent studies that explored cranial bone and suture biology using cutting-edge techniques and have expanded our current understanding of this research field, especially from the perspective of development, homeostasis, injury repair, resident MSCs/SSCs, immunosurveillance at the brain's border, and beyond.

Nanog, Stat-3, and Sox-5 involvement in human fetal temporomandibular joint late development

Background and aim

The temporomandibular joint (TMJ) is a synovial joint that allows the complex movements essential for life. It connects the jawbone to the skull, working as a sliding hinge. Moreover, pluripotent stem cells are a source of precursors and tissue-specific cells in developing organisms, however, their biodistribution in developing fetal tissues is weakly studied. The aim of our study was analyse immunohistochemical expression of Nanog, Oct-4, Sox-2 and Stat-3 and Sox-5, in TMJ tissue samples from human fetuses aged between the 12th and 20th weeks of intrauterine life.

Materials and methods

We fixed and processed TMJ tissue samples from human fetuses, histological sections and immunohistochemical procedures were carried out.

Results

TMJ histological studies examination did not reveal any difference in the tissue organization between the samples in the studied periods. Immunohistochemical analysis demonstrated that Oct-4 and Sox-2 lack their expression in TMJ. In contrast, Nanog was expressed in nucleous of proliferative layer of mandibular condyle, Stat-3 was expressed in nuclear cells of articular disc, Stat-3 and Sox-5 showed positive nuclear and cytoplasmic immunostaining in codrocyte layers and in ossification areas.

Conclusions

Nanog acts in maintanence of pluripotency, Stat-3 in articular disc acts as a transcriptional factor. Stat-3 and Sox-2 act in chondrocyte and osteoblast diferentiation. Distribution of the cells, which express Nanog, Stat-3, and Sox-5 in TMJ tissue during fetal development, can help further understand its physiology, pathology, and repairing capacities.

Regeneration of periodontal ligament fibers around mini dental implants and their attachment to the bone in an animal model: A radiographic and histological study

Background

Tissue-engineered periodontal ligament (PDL) around a dental implant by using PDL stem cells (PDLSCs) may be useful in periodontal regeneration and can reduce or eliminate certain shortcomings of dental implants.

Materials and Methods

PDLSCs were isolated from extracted human PDL cells and cultured in a bioreactor. They were identified using markers CD45, CD73, CD90, CD105, and CD146. After the formation of multiple cellular layers, they were then attached on titanium mini dental implants and placed in rabbit tibia. The rabbits were sacrificed after 9 months, and the implants were analyzed histologically and radiographically by Cone beam computed tomography (CBCT).

Results

Isolated PDLSCs obtained from human premolars showed a colony-forming ability on the 7th day and 14th day. Immunocytochemistry revealed that cells had taken up the adequate positive stains for primary antibodies CD73, CD90, CD105, and CD146 and negative staining for CD45. The histological sections obtained from sacrificed rabbits, when viewed under the light microscope, clearly showed the presence of PDL around dental implants. CBCT examination showed that the implant was well within the bone and did not migrate. The site appeared to be normal without any lytic changes in the bone.

Conclusion

It can safely be postulated from the present study that tissue engineering of PDL can be achieved around dental implants using PDLSCs. Important inter-tissue interactions like the formation of a functional PDL around the implantation site, and induction of bone formation in the vicinity of the implants may be possible. Future research in humans is required for further research.

Hopes and opportunities of stem cells from human exfoliated deciduous teeth (SHED) in cartilage tissue regeneration

Cartilage lesions are common conditions, affecting elderly and non-athletic populations. Despite recent advances, cartilage regeneration remains a major challenge today. The absence of an inflammatory response following damage and the inability of stem cells to penetrate into the healing site due to the absence of blood and lymph vessels are assumed to hinder joint repair. Stem cell-based regeneration and tissue engineering have opened new horizons for treatment. With advances in biological sciences, especially stem cell research, the function of various growth factors in the regulation of cell proliferation and differentiation has been established. Mesenchymal stem cells (MSCs) isolated from different tissues have been shown to increase into therapeutically relevant cell numbers and differentiate into mature chondrocytes. As MSCs can differentiate and become engrafted inside the host, they are considered suitable candidates for cartilage regeneration. Stem cells from human exfoliated deciduous teeth (SHED) provide a novel and non-invasive source of MSCs. Due to their simple isolation, chondrogenic differentiation potential, and minimal immunogenicity, they can be an interesting option for cartilage regeneration. Recent studies have reported that SHED-derived secretome contains biomolecules and compounds that efficiently promote regeneration in damaged tissues, including cartilage. Overall, this review highlighted the advances and challenges of cartilage regeneration using stem cell-based therapies by focusing on SHED.

Biomedical applications of three-dimensional bioprinted craniofacial tissue engineering

Anatomical complications of the craniofacial regions often present considerable challenges to the surgical repair or replacement of the damaged tissues. Surgical repair has its own set of limitations, including scarcity of the donor tissues, immune rejection, use of immune suppressors followed by the surgery, and restriction in restoring the natural aesthetic appeal. Rapid advancement in the field of biomaterials, cell biology, and engineering has helped scientists to create cellularized skeletal muscle-like structures. However, the existing method still has limitations in building large, highly vascular tissue with clinical application. With the advance in the three-dimensional (3D) bioprinting technique, scientists and clinicians now can produce the functional implants of skeletal muscles and bones that are more patient-specific with the perfect match to the architecture of their craniofacial defects. Craniofacial tissue regeneration using 3D bioprinting can manage and eliminate the restrictions of the surgical transplant from the donor site. The concept of creating the new functional tissue, exactly mimicking the anatomical and physiological function of the damaged tissue, looks highly attractive. This is crucial to reduce the donor site morbidity and retain the esthetics. 3D bioprinting can integrate all three essential components of tissue engineering, that is, rehabilitation, reconstruction, and regeneration of the lost craniofacial tissues. Such integration essentially helps to develop the patient-specific treatment plans and damage site-driven creation of the functional implants for the craniofacial defects. This article is the bird's eye view on the latest development and application of 3D bioprinting in the regeneration of the skeletal muscle tissues and their application in restoring the functional abilities of the damaged craniofacial tissue. We also discussed current challenges in craniofacial bone vascularization and gave our view on the future direction, including establishing the interactions between tissue-engineered skeletal muscle and the peripheral nervous system.

N-Acetylcysteine Protects the Stem Cells of the Apical Papilla

Objective

Previous research has demonstrated that stem cells of the apical papilla (SCAP) have a lower differentiation potential and are less resistant to cell death as compared to other stem cells. N-acetyl cysteine (NAC) prevents apoptosis of the dental pulp stem cells (DPSCs) by inducing differentiation of these cells. The use of NAC with SCAP could possibly, enhance their differentiation and resistance to cytotoxicity. Hence, the aim of this study was to determine if NAC could prevent apoptosis of SCAP by promoting proliferation and differentiation of these cells thereby contributing to the success of Regenerative endodontic procedures (REPs).

Methods

Human SCAP were cultured with and without 2-hydroxyethyl methacrylate (HEMA), 20 mM NAC and Dexamethasone (Dex). Proliferation rates were analyzed at days 4 and 7. Flow cytometric analysis was used to analyze the levels of cell death. Differentiation of the cells was analyzed using Real-time PCR and an ALP assay. Data were analyzed using ANOVA with a post-hoc Tukey test.

Results

The NAC-treated cells had similar cell viability compared with the controls. The cells treated with NAC + HEMA had significantly higher rates of proliferation as compared to the HEMA only treated groups and displayed more cell viability when these groups were compared with flow cytometric analysis. Real-time PCR and the ALP assay demonstrated that the NAC group upregulated ALP, RUNX-2, and DSPP genes.

Conclusion

The data demonstrated that NAC protects the SCAP from apoptosis and enhances the proliferation and differentiation potential of these cells suggesting that NAC could be used effectively during REPs.

Biomaterials and biotechnology for periodontal tissue regeneration: Recent advances and perspectives

Periodontal tissues are organized in a complex three-dimensional (3D) architecture, including the alveolar bone, cementum, and a highly aligned periodontal ligament (PDL). Regeneration is difficult due to the complex structure of these tissues. Currently, materials are developing rapidly, among which synthetic polymers and hydrogels have extensive applications. Moreover, techniques have made a spurt of progress. By applying guided tissue regeneration (GTR) to hydrogels and cell sheets and using 3D printing, a scaffold with an elaborate biomimetic structure can be constructed to guide the orientation of fibers. The incorporation of cells and biotic factors improves regeneration. Nevertheless, the current studies lack long-term effect tracking, clinical research, and in-depth mechanistic research. In summary, periodontal tissue engineering still has considerable room for development. The development of materials and techniques and an in-depth study of the mechanism will provide an impetus for periodontal regeneration.

Propofol attenuates odontogenic/osteogenic differentiation of human dental pulp stem cells in vitro

Background/purpose

Various studies have used stem cells in the field of bone tissue engineering to repair bone defects. Dental pulp stem cells (DPSCs) have multipotent properties and can be acquired in a noninvasive manner; therefore, they are frequently used in experiments in regenerative medicine. The objective of this study was to investigate the odontogenic/osteogenic differentiation of human DPSCs (hDPSCs) using propofol, a widely used intravenous anesthetic agent.

Materials and methods

Alkaline phosphatase (ALP) staining was used to investigate the effects of various concentrations of propofol (5, 20, 50 and 100 μM) on the osteogenic differentiation of hDPSCs. Real-time qPCR and Western blot analysis were used to detect the effect of propofol on the expression of odontogenic/osteogenic genes, such as DMP1, RUNX2, OCN, and BMP2. Odontogenic/osteogenic differentiation of hDPSCs was estimated at days 7 and 14.

Results

ALP staining of hDPSCs was significantly decreased by propofol treatment. The mRNA expression of DMP1, RUNX2, OCN, and BMP2 decreased after propofol treatment for 14 days. The protein expression of DMP1 and BMP2 was decreased by propofol at days 7 and 14, and that of RUNX2 was decreased by propofol at day 14 only.

Conclusion

Propofol attenuated odontogenic/osteogenic differentiation of hDPSCs in vitro. This result suggests that propofol, which is widely used for dental sedation, may inhibit the odontogenic/osteogenic differentiation of hDPSCs.

Regeneration of temporomandibular joint using in vitro human stem cells: A review

Temporomandibular joint disorders (TMDs) range from gross anatomic deformities of the disc and hard tissue to functional disturbances. Traditional treatment of TMDs includes physical therapy, use of appliances, pharmacological, surgical and psychological interventions. However, during the late stage of TMDs, conventional management often results in inadequate relief of symptoms. Stem cell‐based tissue regeneration has been studied extensively in joint regeneration, including the Temporomandibular Joint (TMJ). This study aims to review the potential of various human stem cells (HSC) for the regeneration of the TMJ. In vitro studies using human mesenchymal stem cells cultured under different conditions to evaluate regeneration of TMJ related structures were searched on PubMed, EMBASE, Cochrane, and Web of Science up to March 2020. In vitro studies utilized several different types of stem cells under varying conditions. Increased osteogenesis and/or chondrogenesis were noted with stem cell interventions compared to control groups on Alkaline Phosphatase (ALP) activity, Col‐I, Col‐II, Col‐X, RUNX2, LPL, and Aggrecan mRNA expression. This review emphasizes the potential of stem cell therapies in the regeneration of TMJ‐related structures. However, further in vivo studies are required to evaluate the efficacy and safety of these therapies in humans.

Basic Research on Tendon Repair: Strategies, Evaluation, and Development

Tendon is a fibro-elastic structure that links muscle and bone. Tendon injury can be divided into two types, chronic and acute. Each type of injury or degeneration can cause substantial pain and the loss of tendon function. The natural healing process of tendon injury is complex. According to the anatomical position of tendon tissue, the clinical results are different. The wound healing process includes three overlapping stages: wound healing, proliferation and tissue remodeling. Besides, the healing tendon also faces a high re-tear rate. Faced with the above difficulties, management of tendon injuries remains a clinical problem and needs to be solved urgently. In recent years, there are many new directions and advances in tendon healing. This review introduces tendon injury and sums up the development of tendon healing in recent years, including gene therapy, stem cell therapy, Platelet-rich plasma (PRP) therapy, growth factor and drug therapy and tissue engineering. Although most of these therapies have not yet developed to mature clinical application stage, with the repeated verification by researchers and continuous optimization of curative effect, that day will not be too far away.

Prospective cohort study to evaluate narrow diameter implants for restoration of a missing lateral incisor in patients with a cleft palate: One-year results

STATEMENT OF PROBLEM

Patients diagnosed with a cleft palate often have a congenitally missing maxillary lateral incisor. The congenital cleft presents the practitioner with challenges including the quantity and quality of bone, a surgically managed cleft correction, and limited clinical space.

PURPOSE

The purpose of the present prospective investigation was to report preliminary results at the 1-year follow-up for this planned 5-year investigation of narrow diameter implants used to restore a missing lateral incisor in patients with a cleft palate.

MATERIAL AND METHODS

Fourteen study participants with a cleft palate and a missing maxillary lateral incisor were enrolled based on established criteria. Narrow diameter implants (AstraTech OsseoSpeed TX 3.0S and 3.5 mm) were placed by using a 2-stage protocol and restored. All study participants received an Atlantis abutment and a cement-retained crown. Four probing depth measurements and bleeding on probing were measured at baseline and at 1 year. Probing depth measurements were evaluated using a 2-way repeated measures ANOVA with Tukey-Kramer multiple comparisons tests. Radiographic marginal bone loss was measured at 1-year by using a digital subtraction technique and evaluated by using a repeated measures ANOVA. Pretreatment cone beam computed tomography (CBCT) images were used to measure a mean gray level that was proportional to bone mineral density (BMD) in the implant site. One-way mixed ANOVA was used to compare the mean gray level and average implant stability quotient (ISQ) loading. A Pearson correlation was also tested between those parameters (α=.05) for each statistical analysis.

RESULTS

The mean marginal bone loss at 1 year was 0.601 ±0.48 mm. Regarding probing depth measurements, a 2-way repeated measures ANOVA found both the location (P=.012) and time (P=.009) were significant. The Tukey-Kramer multiple comparisons test showed a significant difference between the buccal and distal site (P=.006) from baseline to 1-year follow-up.

CONCLUSIONS

Narrow diameter implants are a reliable treatment for replacing a missing lateral incisor in patients with a cleft palate at 1 year, with an implant survival rate of 100% and implant success rate of 94% using the established criteria. A negative association was found between the bone mineral density and the implant stability in the alveolar cleft site of a patient with a cleft palate. The peri-implant soft tissue probe depths exhibited significant change during the first year.

Mesenchymal stem cells and three-dimensional-osteoconductive scaffold regenerate calvarial bone in critical size defects in swine

Craniofacial bones protect vital organs, perform important physiological functions, and shape facial identity. Critical‐size defects (CSDs) in calvarial bones, which will not heal spontaneously, are caused by trauma, congenital defects, or tumor resections. They pose a great challenge for patients and physicians, and significantly compromise quality of life. Currently, calvarial CSDs are treated either by allogenic or autologous grafts, metal or other synthetic plates that are associated with considerable complications. While previous studies have explored tissue regeneration for calvarial defects, most have been done in small animal models with limited translational value. Here we define a swine calvarial CSD model and show a novel approach to regenerate high‐quality bone in these defects by combining mesenchymal stem cells (MSCs) with a three‐dimensional (3D)‐printed osteoconductive HA/TCP scaffold. Specifically, we have compared the performance of dental pulp neural crest MSCs (DPNCCs) to bone marrow aspirate (BMA) combined with a 3D‐printed HA/TCP scaffold to regenerate bone in a calvarial CSD (>7.0 cm²). Both DPNCCs and BMA loaded onto the 3D‐printed osteoconductive scaffold support the regeneration of calvarial bone with density, compression strength, and trabecular structures similar to native bone. Our study demonstrates a novel application of an original scaffold design combined with DPNCCs or BMA to support regeneration of high‐quality bone in a newly defined and clinically relevant swine calvarial CSD model. This discovery may have important impact on bone regeneration beyond the craniofacial region and will ultimately benefit patients who suffer from debilitating CSDs.

Cranial Suture Regeneration Mitigates Skull and Neurocognitive Defects in Craniosynostosis

Craniosynostosis results from premature fusion of the cranial suture(s), which contain mesenchymal stem cells (MSCs) that are crucial for calvarial expansion in coordination with brain growth. Infants with craniosynostosis have skull dysmorphology, increased intracranial pressure, and complications such as neurocognitive impairment that compromise quality of life. Animal models recapitulating these phenotypes are lacking, hampering development of urgently needed innovative therapies. Here, we show that Twist1+/- mice with craniosynostosis have increased intracranial pressure and neurocognitive behavioral abnormalities, recapitulating features of human Saethre-Chotzen syndrome. Using a biodegradable material combined with MSCs, we successfully regenerated a functional cranial suture that corrects skull deformity, normalizes intracranial pressure, and rescues neurocognitive behavior deficits. The regenerated suture creates a niche into which endogenous MSCs migrated, sustaining calvarial bone homeostasis and repair. MSC-based cranial suture regeneration offers a paradigm shift in treatment to reverse skull and neurocognitive abnormalities in this devastating disease.

Photoencapsulated-mesenchymal stromal cells in biodegradable thiol-acrylate hydrogels enhance regeneration of craniofacial bone tissue defects

Aim: This study investigated biodegradable thiol-acrylate hydrogels as stem cell carriers to facilitate cranial bone regeneration. Materials & methods: Two formulations of thiol-acrylate hydrogels (5 and 15 wt% Poly[ethylene glycol]-diacrylate [PEGDA] hydrogels) were used as stem cell carriers. Bone marrow mesenchymal stromal cells and dental pulp mesenchymal stromal cells were photoencapsulated and cultured in basal or osteogenic medium 3 days before the surgery. Using New Zealand White Rabbits, four defects (5 mm diameter and 2 mm thickness) were created and hydrogel scaffolds were implanted in each rabbit cranium for 6 weeks. Results & Conclusion: AlamarBlue assay showed increasing metabolic activity levels in 5 wt% PEGDA hydrogels than 15 wt% PEGDA hydrogels. Photoencapsulated-mesenchymal stromal cells in 15 wt% PEGDA hydrogels demonstrated significantly increasing alkaline phosphatase activity levels on day 7 compared with days 1 and 3. Histological diagnosis showed 5 wt% PEGDA hydrogels resulted in lower averaged residual gel areas than 15 wt% PEGDA hydrogel specimens and control groups 6 weeks postimplantation.

In situ bone regeneration of large cranial defects using synthetic ceramic implants with a tailored composition and design

Large cranial reconstructions are increasingly performed worldwide and still represent a substantial clinical challenge. The gold standard, autologous bone, has limited availability and high donor-site morbidity. Current alloplastic materials are associated with high complication and failure rates. This study shows the capacity of a customized, purely synthetic, 3D-manufactured bioceramic implant to regenerate and restore large cranial defects with mature, well-vascularized bone, with a morphology, ultrastructure, and composition similar to those of native skull bone. This approach triggers the regenerative potential of host tissue by tailoring the implant composition and design. The regeneration of large defects using purely synthetic material without adjunct cell therapy or growth factors represents a major advancement for rehabilitating patients in need of large cranial reconstructions.

The repair of large cranial defects with bone is a major clinical challenge that necessitates novel materials and engineering solutions. Three-dimensionally (3D) printed bioceramic (BioCer) implants consisting of additively manufactured titanium frames enveloped with CaP BioCer or titanium control implants with similar designs were implanted in the ovine skull and at s.c. sites and retrieved after 12 and 3 mo, respectively. Samples were collected for morphological, ultrastructural, and compositional analyses using histology, electron microscopy, and Raman spectroscopy. Here, we show that BioCer implants provide osteoinductive and microarchitectural cues that promote in situ bone regeneration at locations distant from existing host bone, whereas bone regeneration with inert titanium implants was confined to ingrowth from the defect boundaries. The BioCer implant promoted bone regeneration at nonosseous sites, and bone bonding to the implant was demonstrated at the ultrastructural level. BioCer transformed to carbonated apatite in vivo, and the regenerated bone displayed a molecular composition indistinguishable from that of native bone. Proof-of-principle that this approach may represent a shift from mere reconstruction to in situ regeneration was provided by a retrieved human specimen, showing that the BioCer was transformed into well-vascularized osteonal bone, with a morphology, ultrastructure, and composition similar to those of native human skull bone.

Efficacy of autologous stem cells for bone regeneration during endosseous dental implants insertion - A systematic review of human studies

Availability of adequate quantity and quality of bone is prerequisite for longevity and survival of endosseous dental implants. Most of the clinicians face with the problem of lack of bone due to long-standing edentulism during this treatment modality. Conventional therapies with the use of various types of bone grafts and membranes have provided clinicians with unpredictable and compromised results. Cell-based therapies utilizing undifferentiated cells, that have the potential to differentiate into various cell types including osteoblastic lineages, have demonstrated through various previously conducted in-vitro and animal studies, a successful formation of bone in a predictable manner. Thus the main objective of this review was to evaluate the effectiveness of these therapies when applied on human subjects. A search was carried out in MEDLINE (via PubMed) and Cochrane CENTRAL databases for completed randomized and non-randomised clinical trials utilizing stem cell-based therapies with histologic and radiographic analysis written in English up to January 2019. This search of the literature yielded 10 studies meeting the inclusion and exclusion criteria. In all these studies, stem cells were primarily used to achieve bone augmentation during insertion of endosseous dental implants. Results of these therapies conducted on human subjects have shown a positive impact on bone regeneration, in particular, therapies utilizing bone marrow and adipose tissue derived stem cells. But the clinicians need to examine the efficacy, safety, feasibility of these therapies while treating large size defects or planning for shorter healing period and early loading of dental implants.

Effect of Gellan Gum/Tuna Skin Film in Guided Bone Regeneration in Artificial Bone Defect in Rabbit Calvaria

It is necessary to prevent the invasion of soft tissue into bone defects for successful outcomes in guided bone regeneration (GBR). For this reason, many materials are used as protective barriers to bone defects. In this study, a gellan gum/tuna skin gelatin (GEL/TSG) film was prepared, and its effectiveness in bone regeneration was evaluated. The film exhibited average cell viability in vitro. Experimental bone defects were prepared in rabbit calvaria, and a bone graft procedure with beta-tricalcium phosphate was done. The film was used as a membrane of GBR and compared with results using a commercial collagen membrane. Grafted material did not show dispersion outside of bone defects and the film did not collapse into the bone defect. New bone formation was comparable to that using the collagen membrane. These results suggest that the GEL/TSG film could be used as a membrane for GBR.

Effect of MicroRNA-20a on Osteogenic Differentiation of Human Adipose Tissue-Derived Stem Cells

Osteogenic differentiation of human adipose tissue-derived stem cells (hASCs) is a complex process that is regulated by multiple factors, including microRNAs (miRNAs). The miRNA miR-20a was shown to promote bone formation from bone marrow-derived mesenchymal stem cells. However, the role of miR-20a in osteogenic differentiation of hASCs remains unclear. In this study, we systematically evaluated the function of miR-20a in regulating hASC osteogenesis in vitro. hASCs were transduced with miR-20a-overexpressing and miR-20a-sponge lentiviral vectors, with green fluorescent protein (GFP) as a control. The results showed that miR-20a transcription was upregulated after hASC mineralization. Compared with the miR-20a-sponge, GFP, and hASC groups, the miR-20a-overexpressing group showed higher alkaline phosphatase (ALP) activity on days 7 and 14. Moreover, the mRNA level of ALP increased significantly in the miR-20a-overexpressing group on day 14. Furthermore, the protein of the target gene PPARγ was decreased, and the osteogenic differentiation-associated proteins ALP, osteocalcin, and RUNX2 were upregulated. hASCs anchored to HA/β-TCP revealed a healthy polygonal morphology and developed cytoplasmic extensions. miR-20a promoted osteogenic differentiation of the cell scaffold. Taken together, these data -confirm that miRNA-20a promotes the osteogenesis of hASCs in vitro, and its essential role in vivo needs further -investigation.

microRNA expression profiles and the potential competing endogenous RNA networks in NELL-1-induced human adipose-derived stem cell osteogenic differentiation

Studies have indicated that Nel-like molecule-1 (NELL-1) was an osteoblast-specific cytokine and some specific microRNAs (miRNAs) could serve as competing endogenous RNA (ceRNA) to partake in osteogenic differentiation of human adipose-derived stem cells (hASCs). The aim of this study was to explore the potential functional mechanisms of recombinant human NELL-1 protein (rhNELL-1) during hASCs osteogenic differentiation. rhNELL-1 was added to osteogenic medium to activate osteogenic differentiation of hASCs. High-throughput RNA sequencing (RNA-Seq) was performed and validated by real-time quantitative polymerase chain reaction. Gene ontology functional annotation and Kyoto Encyclopedia of Genes and Genomes pathway analysis were performed to detect the functions of differentially expressed miRNAs and genes. Coding-noncoding gene co-expression network and ceRNA networks were constructed to predict the potential regulatory role of miRNAs. A total of 1010 differentially expressed miRNAs and 1762 differentially expressed messenger RNAs (mRNAs) were detected. miRNA-370-3p, bone morphogenetic protein 2 (BMP2), and parathyroid hormone like hormone (PTHLH) were differentially expressed during NELL-1-induced osteogenesis. Bioinformatic analyses demonstrated that these differentially expressed miRNAs and mRNAs enriched in Rap1 signaling pathway, PI3K-Akt signaling pathway, p53 signaling pathway, Glucagon signaling pathway, and hypoxia-inducible factor-1 signaling pathway, which were important pathways related to osteogenic differentiation. In addition, miRNA-370-3p and has-miR-485-5p were predicted to interact with circ0001543, circ0002405, and ENST00000570267 in ceRNA networks. Based on the gain or loss of functional experiments by transfection, the results showed that miR-370-3p was a key regulator in osteogenic differentiation by targeting BMP2 and disturbing the expression of PTHLH, and participated in NELL-1-stimulated osteogenesis. The present study provided the primary data and evidence for further exploration on the roles of miRNAs and ceRNAs during NELL-1-induced ossification of hASCs.

Sp1 promotes dental pulp stem cell osteoblastic differentiation through regulating noggin

Based on the high self-renewal ability and osteoblastic differentiation capacity, dental pulp stem cells (DPSCs) are suggested to be promising cell source for osteogenesis. Therefore, illustrating the mechanism of osteoblastic differentiation of DPSCs is required. This current study aims to illustrate the role and mechanism of Sp1 in regulating osteoblastic differentiation of DPSCs. In this study, we downregulated Sp1 in DPSCs and evaluated the osteoblastic differentiation by measuring Runx2 and OCN expression with Western blot analysis and by Alizarin red staining. Furthermore, we investigated the mechanism of Sp1 regulating noggin with Firefly luciferase reporter gene assay and ChIP assay, and correspondingly evaluated the function of noggin in Sp1-regulated osteoblastic differentiation of DPSCs. We found that knockdown of Sp1 inhibits the expression of ALP, Runx2, COL1A1 and OCN, and decreases ALP staining, Alizarin red staining. Sp1 binds to noggin promoter and inhibits noggin expression, thus correspondingly regulates DPSCs osteoblastic differentiation. In conclusion, our study revealed that Sp1 regulates DPSCs osteoblastic differentiation through noggin and that Sp1/noggin can provide new perspective for enhancing DPSCs osteogenesis.

Synergistic effects of polyaniline and pulsed electromagnetic field to stem cells osteogenic differentiation on polyvinylidene fluoride scaffold

Repairing the lost or damaged mandible is very difficult and time-consuming, so there is a great hope for tissue engineering to accelerate it. At the present study, electrospinning was applied to fabricate polyvinylidene fluoride (PVDF) and PVDF-polyaniline (PANI) composite scaffolds. In addition, extremely low frequency pulsed electromagnetic field (PEMF) was applied for treating the stem cells derived from dental pulp (DPSCs) when cultured on the nanofibrous scaffolds. Osteoinductive property of the fabricated PVDF, PVDF-PANI scaffold at the presence and absence of the PEMF was investigated by evaluating the common osteogenic differentiation markers in seeded-DPSCs on the scaffold. Results demonstrated that cell attachment, protein adsorption and cells viability were increased when PEMF was applied. In addition, ALP activity, calcium content, osteogenic genes and protein evaluations confirmed that PEMF could significantly increase osteoinductivity of the PVDF while composite with PANI. According to the results, the use of polymers with piezoelectricity and conductivity features plus PEMF exposure has a promising potential to improve the current treatment methods in bone and mandibular defects.

Electrical Stimulation through Conductive Substrate to Enhance Osteo-Differentiation of Human Dental Pulp-Derived Stem Cells

Human dental pulp-derived stem cells (hDPSCs) are promising cellular sources for bone healing. The acceleration of their differentiation should be beneficial to their clinical application. Therefore, a conductive polypyrrole (PPy)-made electrical stimulation (ES) device was fabricated to provide direct-current electric field (DCEF) treatment, and its effect on osteo-differentiation of hDPSCs was investigated in this study. To determine the optimal treating time, electrical field of 0.33 V/cm was applied to hDPSCs once for 4 h on different days after the osteo-induction. The alizarin red S staining results suggested that ES accelerated the mineralization rates of hDPSCs. The quantification analysis results revealed a nearly threefold enhancement in calcium deposition by ES at day 0, 2, and 4, whereas the promotion effect in later stages was in vain. To determine the ES-mediated signaling pathway, the expression of genes in the bone morphogenetic protein (BMP) family and related receptors were quantified using qPCR. In the early stages of osteo-differentiation, the mRNA levels of BMP2, BMP3, BMP4, and BMP5 were increased significantly in the ES groups, indicating that these genes were involved in the specific signaling routes induced by ES. We are the first using DCEF to improve the osteo-differentiation of hDPSCs, and our results promise the therapeutic applications of hDPSCs on cell-based bone tissue engineering.

Comparative Volume Analysis of Alveolar Defects by 3D Simulation

A precise volumetric assessment of maxillary alveolar defects in patients with cleft lip and palate can reduce donor site morbidity or allow accurate preparation of bone substitutes in future applications. However, there is a lack of agreement regarding the optimal volumetric technique to adopt. This study measured the alveolar bone defects by using two cone-beam computed tomography (CBCT)-based surgical simulation methods. Presurgical CBCT scans from 32 patients with unilateral or bilateral clefts undergoing alveolar bone graft surgery were analyzed. Two hands-on CBCT-based volumetric measurement methods were compared: the 3D real-scale printed model-based surgical method and the virtual surgical method. Different densities of CBCT were compared. Intra- and inter-examiner reliability was assessed. For patients with unilateral clefts, the average alveolar defect volumes were 1.09 ± 0.24 and 1.09 ± 0.25 mL (p > 0.05) for 3D printing- and virtual-based models, respectively; for patients with bilateral clefts, they were 2.05 ± 0.22 and 2.02 ± 0.27 mL (p > 0.05), respectively. Bland–Altman analysis revealed that the methods were equivalent for unilateral and bilateral alveolar cleft defect assessment. No significant differences or linear relationships were observed between adjacent different densities of CBCT for model production to obtain the measured volumes. Intra- and inter-examiner reliability was moderate to good (intraclass correlation coefficient (ICC) > 0.6) for all measurements. This study revealed that the volume of unilateral and bilateral alveolar cleft defects can be equally quantified by 3D-printed and virtual surgical simulation methods and provides alveolar defect-specific volumes which can serve as a reference for planning and execution of alveolar bone graft surgery.

Stem Cells: Importance of Elucidating a Stem Cell Laboratory

Stem cells, which were initially elucidated in the 1960s, are characterized by their ability to continuously renew themselves to differentiate into multiple cellular types. For this reason, they remain the subject of intensive research, for their potential to treat certain diseases. In craniofacial surgery, tissue engineering using stem cells can be employed in various techniques. These include 3D printing, which has the potential to regenerate dental, oral, and craniofacial structures, once lost to congenital anomalies, trauma and other diseases like cancer. With the growing battery of information about stem cells and their potential translation from research to clinical practice, it is important to outline what is the basic layout of a stem cell research facility.

A Combination of Oxo-M and 4-PPBP as a potential regenerative therapeutics for tendon injury

Tendons injuries frequently result in scar-like tissue with poor biochemical structure and mechanical properties. We have recently reported that CD146+ perivascular originated tendon stem/progenitor cells (TSCs), playing critical roles in tendon healing. Here, we identified highly efficient small molecules that selectively activate endogenous TSCs for tendon regeneration. Methods: From a pool of ERK1/2 and FAK agonists, Oxo-M and 4-PPBP were identified, and their roles in tenogenic differentiation of TSCs and in vivo tendon healing were investigated. Controlled delivery of Oxo-M and 4-PPBP was applied via PLGA µS. Signaling studies were conducted to determine the mechanism for specificity of Oxo-M and 4-PPBP to CD146+ TSCs. Results: A combination of Oxo-M and 4-PPBP synergistically increased the expressions of tendon-related gene markers in TSCs. In vivo, delivery of Oxo-M and 4-PPBP significantly enhanced healing of fully transected rat patellar tendons (PT), with functional restoration and reorganization of collagen fibrous structure. Our signaling study suggested that Oxo-M and 4-PPBP specifically targets CD146+ TSCs via non-neuronal muscarinic acetylcholine receptors (AChR) and σ1 receptor (σ1) signaling. Principal conclusions: Our findings demonstrate a significant potential of Oxo-M and 4-PPBP as a regenerative therapeutics for tendon injuries.

Vertical Bone Construction with Bone Marrow-Derived and Adipose Tissue-Derived Stem Cells

The purpose of this study was to conduct a histomorphometric analysis of bone marrow-derived and adipose tissue-derived stem cells, associated with a xenograft block, in vertical bone constructions in rabbit calvaria. Ten rabbits received two xenograft blocks on the calvaria, after decortication of the parietal bone. The blocks were fixed with titanium screws. The blocks were combined with the bone marrow-derived mesenchymal stem cells in the bone marrow stem cell (BMSC) group (right side of the calvaria) or with the adipose tissue-derived mesenchymal stem cells in the adipose tissue stem cell (ATSC) group (left side of the calvaria). After 8 weeks, the animals were sacrificed and their parietal bones were fixed in 10% formalin for the histomorphometric analysis. The following parameters were evaluated—newly formed bone (NFB), xenogeneic residual particles (XRP), and non-mineralized tissue (NMT). The histomorphometric analysis revealed 11.9 ± 7.5% and 7.6 ± 5.6% for NFB, 22.14 ± 8.5% and 21.6 ± 8.5% for XRP, and 65.8 ± 10.4% and 70.8 ± 7.4% for NMT in groups BMSC and ATSC, respectively, with statistically significant differences in the NFB and the NMT between the groups, but no differences in the XRP. Therefore, it can be concluded that the bone marrow-derived stem cells seem to have more potential for the bone formation than do the adipose tissue-derived stem cells when used in combination with the xenogenous blocks in the vertical bone construction.

Vertical ridge augmentation using guided bone regeneration procedure and dental pulp derived mesenchymal stem cells with simultaneous dental implant placement: A histologic study in a sheep model

OBJECTIVES

To determine the effects of bone graft and dental pulp derived mesenchymal stem cells (DPMSCs) implantation with simultaneous dental implant placement on osteointegration, newly formed bone and vertical bone height histologically and histomorphometrically in a sheep model.

MATERIAL AND METHODS

A total of 48 implants were divided into three groups. In Group I (n = 16), no material was placed around the implants. In Group II (n = 16), particulate deproteinized bovine bone graft (DBBG) was placed around the implant and in Group III (n = 16), 2 × 106 DPMSCs were placed around the implant with DBBG. All implants were covered with a 20 × 30 mm collagen membrane and the edges of the membrane were fixed with mini screws. The animals were sacrificed 3 and 6 weeks after surgery. Histologic and histomorphometric assessments were performed.

RESULTS

The area of newly formed bone in Groups I, II, and III were calculated as percentage 2.15 ± 0.22, 11.88 ± 0.77, and 14.50 ± 0.67 respectively after 3 weeks and 3.33 ± 0.37, 18.45 ± 0.33, and 29 ± 1.07 after 6 weeks, respectively (P < 0.05). Three weeks after dental implant placement, the vertical bone length was 0.17 ± 0.02 mm in Group I, 0.89 ± 0.068 mm in Group II and 0.96 ± 0.05 mm in Group III. After 6 weeks, these values were 0.28 ± 0.03 mm, 1.34 ± 0.08 mm, and 1.49 ± 0.08 mm, respectively. There was no significant difference between Groups II and III at 3 and 6 weeks in terms of vertical bone length.

CONCLUSION

Bone graft and DPMSCs application with dental implant have beneficial effects on newly formed bone and vertical bone height in this experimental sheep model.

Teeth-derived stem cells: A source for cell therapy

Cell therapy is one of the important therapeutic approaches in the treatment of many diseases such as cancer, degenerative diseases, and cardiovascular diseases. Among various cell types, which could be used as cell therapies, stem cell therapy has emerged as powerful tools in the treatment of several diseases. Multipotent stem cells are one of the main classes of stem cells that could originate from different parts of the body such as bone marrow, adipose, placenta, and tooth. Among several types of multipotent stem cells, tooth-derived stem cells (TDSCs) are associated with special properties such as accessible, easy isolation, and low invasive, which have introduced them as a good source for using in the treatment of several diseases such as neural injuries, liver fibrosis, and Cohrn's disease. Here, we provided an overview of TDSCs particular stem cells from human exfoliated deciduous teeth and clinical application of them. Moreover, we highlighted molecular mechanisms involved in the regulation of dental stem cells fate.

A canine in vitro model for evaluation of marrow-derived mesenchymal stromal cell-based bone scaffolds

Tissue engineered bone grafts based on bone marrow mesenchymal stromal cells (MSCs) are being actively developed for craniomaxillofacial (CMF) applications. As for all tissue engineered implants, the bone-regenerating capacity of these MSC-based grafts must first be evaluated in animal models prior to human trials. Canine models have traditionally resulted in improved clinical translation of CMF grafts relative to other animal models. However, the utility of canine CMF models for evaluating MSC-based bone grafts rests on canine MSCs (cMSCs) responding in a similar manner to scaffold-based stimuli as human MSCs (hMSCs). Herein, cMSC and hMSC responses to polyethylene glycol (PEG)-based scaffolds were therefore compared in the presence or absence of osteoinductive polydimethylsiloxane (PDMS). Notably, the conjugation of PDMS to PEG-based constructs resulted in increases in both cMSC and hMSC osteopontin and calcium deposition. Based on these results, cMSCs were further used to assess the efficacy of tethered bone morphogenic protein 2 (BMP2) in enhancing PEG-PDMS scaffold osteoinductivity. Addition of low doses of tethered BMP2 (100 ng/mL) to PEG-PDMS systems increased cMSC expression of osterix and osteopontin compared to both PEG-PDMS and PEG-BMP2 controls. Furthermore, these increases were comparable to effects seen with up to five-times higher BMP2 doses noted in literature. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A:2382-2393, 2018.

Nanoscale and Macroscale Scaffolds with Controlled-Release Polymeric Systems for Dental Craniomaxillofacial Tissue Engineering

Tremendous progress in stem cell biology has resulted in a major current focus on effective modalities to promote directed cellular behavior for clinical therapy. The fundamental principles of tissue engineering are aimed at providing soluble and insoluble biological cues to promote these directed biological responses. Better understanding of extracellular matrix functions is ensuring optimal adhesive substrates to promote cell mobility and a suitable physical niche to direct stem cell responses. Further, appreciation of the roles of matrix constituents as morphogen cues, termed matrikines or matricryptins, are also now being directly exploited in biomaterial design. These insoluble topological cues can be presented at both micro- and nanoscales with specific fabrication techniques. Progress in development and molecular biology has described key roles for a range of biological molecules, such as proteins, lipids, and nucleic acids, to serve as morphogens promoting directed behavior in stem cells. Controlled-release systems involving encapsulation of bioactive agents within polymeric carriers are enabling utilization of soluble cues. Using our efforts at dental craniofacial tissue engineering, this narrative review focuses on outlining specific biomaterial fabrication techniques, such as electrospinning, gas foaming, and 3D printing used in combination with polymeric nano- or microspheres. These avenues are providing unprecedented therapeutic opportunities for precision bioengineering for regenerative applications.

Characterization of the Cellular Responses of Dental Mesenchymal Stem Cells to the Immune System

INTRODUCTION

Dental stem cells have gained importance recently and are being used for various purposes in regenerative medicine and dentistry. Although much research has been done to show the various properties of these dental stem cells, the immunomodulatory properties of some of these stem cells are still unknown. This is important considering these cells are being used routinely. Therefore, the aim of this study was to investigate the interactions between the activated immune cells and 3 types of dental-derived mesenchymal stem cells: dental pulp stem cells, stem cells from human exfoliated deciduous teeth, and stem cells of the apical papilla (SCAP).

METHODS

SCAP, dental pulp stem cells, stem cells from human exfoliated deciduous teeth, and periodontal ligament fibroblasts were cultured, and various assays were performed including a proliferation assay, flow cytometric analysis, lactate dehydrogenase and chromium-51 cytotoxicity assays, and an enzyme-linked immunosorbent assay to evaluate the interactions of these dental stem cells when cocultured with either peripheral blood mononuclear cells or natural killer cells.

RESULTS

SCAP were less resistant to immune cell-mediated cytotoxicity as seen from the results obtained from the LDH and chromium-51 cytotoxicity assays. The flow cytometric analysis showed a lower resilience of SCAP to cytotoxic compounds. The enzyme-linked immunosorbent assay results demonstrated that the SCAP induced high levels of proinflammatory cytokine secretion compared with the other dental stem cells.

CONCLUSIONS

SCAP did not perform as well as the other dental stem cells. This could in turn affect their survival and differentiation abilities as well as their functionality. This may be an important aspect to consider when selecting dental stem cells for various regenerative procedures.

Comparison of Intraoral Bone Regeneration with Iliac and Alveolar BMSCs

This study compared the osteogenic potential of bone marrow mesenchymal stem cells (BMSCs) of iliac and alveolar origins (I-BMSCs and Al-BMSCs, respectively), which were transplanted in combination with β tricalcium phosphate (β-TCP) in peri-implant bone defects to investigate the osseointegration between dental implants and tissue-engineered bone in dogs. Specifically, I-BMSCs and Al-BMSCs were cultured, characterized, and seeded on β-TCP and subjected to immunoblotting analyses and alkaline phosphatase activity assays. Subsequently, these cell-seeded scaffolds were implanted into defects that were freshly generated in the mandibular premolar areas of 4 dogs. The defects were covered with β-TCP + Al-BMSCs ( n = 6), β-TCP + I-BMSCs ( n = 6), or β-TCP ( n = 6) or served as the blank control ( n = 6). After healing for 12 wk, the formation and mineralization of new bones were assessed through micro-computed tomographic, histologic, and histomorphometric analyses, and bone-to-implant contacts were measured in the specimens. It was evident that in this large animal model, I-BMSCs and Al-BMSCs manifested similarly strong osteogenic potential, as significantly more new bone was formed in the Al-BMSC and I-BMSC groups than otherwise ( P < 0.01). Therefore, Al-BMSCs are emerging as an efficient alternative for autologous mesenchymal stem cells in regenerative dental and maxillofacial therapies. I-BMSCs, if not restricted in their bioavailability, can also be of great utility in bone tissue-engineering applications.

Transforming growth factor-beta1 promotes Geistlich Bio-Oss® osteogenesis via inhibiting local inflammation response in vivo

Inhibiting inflammation is helpful in relieving the absorption of alveolar bone and promoting periodontal bone regeneration. In a previous study, we showed that transforming growth factor-beta1 (TGF-β1)-induced Treg cells inhibit the absorption of tissue-engineered cartilage caused by endogenous IFN-γ and TNF-α. In this study, we investigated the effect of inhibiting local inflammatory responses on Geistlich Bio-Oss^® osteogenesis promotion in vivo. TGF-β1⁺BMMSCs (bone marrow mesenchymal stem cells) were cultured in Geistlich Bio-Oss^® medium, and biocompatibility was evaluated. Alveolar bone defects in New Zealand rabbits repaired by application of Geistlich Bio-Oss^® were compared to the effects of added TGF-β1⁺BMMSCs. There was no significant difference between the untreated Geistlich Bio-Oss^® medium-control group and the group treated with the addition of TGF-β1⁺BMMSCs. Pro-inflammatory cytokines IFN-γ and TNF-α delayed Geistlich Bio-Oss^®-induced osteogenesis, but no significant difference in osteogenesis was seen with the addition of TGF-β1⁺BMMSCs. Geistlich Bio-Oss^® has good compatibility with TGF-β1⁺BMMSCs. However, the dual role of in vivo TGF-β1⁺BMMSCs in regenerating periodontal bone and limiting local inflammation is not clear.

Angiogenic and osteogenic regeneration in rats via calcium phosphate scaffold and endothelial cell co-culture with human bone marrow mesenchymal stem cells (MSCs), human umbilical cord MSCs, human induced pluripotent stem cell-derived MSCs and human embryonic stem cell-derived MSCs

Angiogenesis is a limiting factor in regenerating large bone defects. The objective of this study was to investigate angiogenic and osteogenic effects of co-culture on calcium phosphate cement (CPC) scaffold using human umbilical vein endothelial cells (hUVECs) and mesenchymal stem cells (MSCs) from different origins for the first time. hUVECs were co-cultured with four types of cell: human umbilical cord MSCs (hUCMSCs), human bone marrow MSCs (hBMSCs) and MSCs from induced pluripotent stem cells (hiPSC-MSCs) and embryonic stem cells (hESC-MSCs). Constructs were implanted in 8 mm cranial defects of rats for 12 weeks. CPC without cells served as control 1. CPC with hBMSCs served as control 2. Microcapillary-like structures were successfully formed on CPC in vitro in all four co-cultured groups. Microcapillary lengths increased with time (p < 0.05). Osteogenic and angiogenic gene expressions were highly elevated and mineralization by co-cultured cells increased with time (p < 0.05). New bone amount and blood vessel density of co-cultured groups were much greater than controls (p < 0.05) in an animal study. hUVECs co-cultured with hUCMSCs, hiPSC-MSCs and hESC-MSCs achieved new bone and vessel density similar to hUVECs co-cultured with hBMSCs (p > 0.1). Therefore, hUCMSCs, hiPSC-MSCs and hESC-MSCs could serve as alternative cell sources to hBMSCs, which require an invasive procedure to harvest. In conclusion, this study showed for the first time that co-cultures of hUVECs with hUCMSCs, hiPSC-MSCs, hESC-MSCs and hBMSCs delivered via CPC scaffold achieved excellent osteogenic and angiogenic capabilities in vivo. The novel co-culture constructs are promising for bone reconstruction with improved angiogenesis for craniofacial/orthopaedic applications. Copyright © 2017 John Wiley & Sons, Ltd.

Synthesis of cell composite alginate microfibers by microfluidics with the application potential of small diameter vascular grafts

Fabrication of small diameter vascular grafts (SDVGs) with appropriate responses for clinical application is still challenging. In the present work, the production and characterization of solid alginate based microfibers as potential SDVG candidates through the method of microfluidics were considered original. A simple glass microfluidic device with a 'L-shape' cylindrical-flow channel in the microfluidic platform was developed. The gelation of microfibers occurred when the alginate solution and a CaCl₂ solution were introduced as a core flow and as a sheath flow, respectively. The diameters of the microfibers could be controlled by varying the flow rates and the glass capillary tubes diameters at their tips. The generated microfibers had somewhat rough and porous surfaces, their suture retention strengths were comparable to the strength of other tissue engineered grafts. The encapsulated mesenchymal stem cells proliferated well in the microfibers, and showed a stable endothelialization under the angiogenesis effects of vascular endothelial growth factor and fibroblastic growth factor. The in vivo implant into the mice abdomens indicated that cell composite microfibers caused a mild host reaction. These encouraging results suggest great promise of the application of microfluidics as a future alternative in SDVGs engineering.

Dental and orofacial mesenchymal stem cells in craniofacial regeneration: The prosthodontist's point of view

Of the available regenerative treatment options, craniofacial tissue regeneration using mesenchymal stem cells (MSCs) shows promise. The ability of stem cells to produce multiple specialized cell types along with their extensive distribution in many adult tissues have made them an attractive target for applications in tissue engineering. MSCs reside in a wide spectrum of postnatal tissue types and have been successfully isolated from orofacial tissues. These dental- or orofacial-derived MSCs possess self-renewal and multilineage differentiation capacities. The craniofacial system is composed of complex hard and soft tissues derived from sophisticated processes starting with embryonic development. Because of the complexity of the craniofacial tissues, the application of stem cells presents challenges in terms of the size, shape, and form of the engineered structures, the specialized final developed cells, and the modulation of timely blood supply while limiting inflammatory and immunological responses. The cell delivery vehicle has an important role in the in vivo performance of stem cells and could dictate the success of the regenerative therapy. Among the available hydrogel biomaterials for cell encapsulation, alginate-based hydrogels have shown promising results in biomedical applications. Alginate scaffolds encapsulating MSCs can provide a suitable microenvironment for cell viability and differentiation for tissue regeneration applications. This review aims to summarize current applications of dental-derived stem cell therapy and highlight the use of alginate-based hydrogels for applications in craniofacial tissue engineering.