Cell attachment on poly(3-hydroxybutyrate)-poly(ethylene glycol) copolymer produced by Azotobacter chroococcum 7B

Current advances and emerging trends in sustainable polyhydroxyalkanoate modification from organic waste streams for material applications

The current processes for producing polyhydroxyalkanoates (PHAs) are costly, owing to the high cost of cultivation feedstocks, and the need to sterilise the growth medium, which is energy-intensive. PHA has been identified as a promising biomaterial with a wide range of potential applications and its functionalization from waste streams has made significant advances recently, which can help foster the growth of a circular economy and waste reduction. Recent developments and novel approaches in the functionalization of PHAs derived from various waste streams offer opportunities for addressing these issues. This study focuses on the development of sustainable, efficient, and cutting-edge methods, such as advanced bioprocess engineering, novel catalysts, and advances in materials science. Chemical techniques, such as epoxidation, oxidation, and esterification, have been employed for PHA functionalization, while enzymatic and microbial methods have indicated promise. PHB/polylactic acid blends with cellulose fibers showed improved tensile strength by 24.45-32.08 % and decreased water vapor and oxygen transmission rates while PHB/Polycaprolactone blends with a 1:1 ratio demonstrated an elongation at break four to six times higher than pure PHB, without altering tensile strength or elastic modulus. Moreover, PHB films blended with both polyethylene glycol and esterified sodium alginate showed improvements in crystallinity and decreased hydrophobicity.

Production and characterization of polyhydroxyalkanoates by Halomonas alkaliantarctica utilizing dairy waste as feedstock

Currently, the global demand for polyhydroxyalkanoates (PHAs) is significantly increasing. PHAs are produced by several bacteria that are an alternative source of synthetic polymers derived from petrochemical refineries. This study established a simple and more feasible process of PHA production by Halomonas alkaliantarctica using dairy waste as the only carbon source. The data confirmed that the analyzed halophile could metabolize cheese whey (CW) and cheese whey mother liquor (CWML) into biopolyesters. The highest yield of PHAs was 0.42 g/L in the cultivation supplemented with CWML. Furthermore, it was proved that PHA structure depended on the type of by-product from cheese manufacturing, its concentration, and the culture time. The results revealed that H. alkaliantarctica could produce P(3HB-co-3HV) copolymer in the cultivations with CW at 48 h and 72 h without adding of any precursors. Based on the data obtained from physicochemical and thermal analyses, the extracted copolymer was reported to have properties suitable for various applications. Overall, this study described a promising approach for valorizing of dairy waste as a future strategy of industrial waste management to produce high value microbial biopolymers.

Polyhydroxybutyrate (PHB) in nanoparticulate form improves physical and biological performance of scaffolds

Polyhydroxyalkanoates (PHAs) are natural polyesters produced by microorganisms as a source of intracellular energy reserves. Due to their desirable material characteristics, these polymers have been thoroughly investigated for tissue engineering and drug delivery applications. A tissue engineering scaffold serves as a substitute of the native extracellular matrix (ECM) and plays a crucial role in tissue regeneration by providing temporary support for cells during natural ECM formation. In this study, porous, biodegradable scaffolds were prepared using native polyhydroxybutyrate (PHB) and PHB in nanoparticulate form using salt leaching method, to investigate the differences in the physicochemical properties such as crystallinity, hydrophobicity, surface morphology, roughness, and surface area and biological properties of the prepared scaffolds. As per the BET analysis, PHB nanoparticles-based (PHBN) scaffolds presented a significant difference in the surface area as compare to PHB scaffolds. PHBN scaffolds showed decreased crystallinity and improved mechanical strength as compared to PHB scaffolds. Thermogravimetry analysis shows delayed degradation of PHBN scaffolds. An examination of Vero cell lines' cell viability and adhesion over time revealed enhanced performance of PHBN scaffolds. Our research suggests that scaffold made of PHB nanoparticles could serve as a superior material for tissue engineering applications than its native form.

The Role of Bacterial Polyhydroalkanoate (PHA) in a Sustainable Future: A Review on the Biological Diversity

Environmental challenges related to the mismanagement of plastic waste became even more evident during the COVID-19 pandemic. The need for new solutions regarding the use of plastics came to the forefront again. Polyhydroxyalkanoates (PHA) have demonstrated their ability to replace conventional plastics, especially in packaging. Its biodegradability and biocompatibility makes this material a sustainable solution. The cost of PHA production and some weak physical properties compared to synthetic polymers remain as the main barriers to its implementation in the industry. The scientific community has been trying to solve these disadvantages associated with PHA. This review seeks to frame the role of PHA and bioplastics as substitutes for conventional plastics for a more sustainable future. It is focused on the bacterial production of PHA, highlighting the current limitations of the production process and, consequently, its implementation in the industry, as well as reviewing the alternatives to turn the production of bioplastics into a sustainable and circular economy.

Enhanced production of biobased, biodegradable, Poly(3-hydroxybutyrate) using an unexplored marine bacterium Pseudohalocynthiibacter aestuariivivens, isolated from highly polluted coastal environment

The production and disposal of plastics from limited fossil reserves, has prompted research for greener and sustainable alternatives. Polyhydroxyalkanoates (PHAs) are biocompatible, biodegradable, and thermoprocessable polyester produced by microbes. PHAs found several applications but their use is limited due to high production cost and low yields. Herein, for the first time, the isolation and characterization of Pseudohalocynthiibacter aestuariivivens P96, a marine bacterium able to produce surprising amount of PHAs is reported. In the best growth condition P96 was able to reach a maximum production of 4.73 g/L, corresponding to the 87 % of total cell dry-weight. Using scanning and transmission microscopy, lab-scale fermentation, spectroscopic techniques, and genome analysis, the production of thermoprocessable polymer Polyhydroxybutyrate P(3HB), a PHAs class, endowed with mechanical and thermal properties comparable to that of petroleum-based plastics was confirmed. This study represents a milestone toward the use of this unexplored marine bacterium for P(3HB) production.

Influence of Poly-3-hydroxybutyrate Micro-Bioplastics and Polyethylene Terephthalate Microplastics on the Soil Organic Matter Structure and Soil Water Properties

Adverse effects of microplastics on soil abiotic properties have been attributed to changes in the soil structure. Notably, however, the effects on the supramolecular structure of soil organic matter (SOM) have been overlooked, despite their key role in most soil properties. This work accordingly investigated the influence of plastic residues at various concentrations on the SOM supramolecular structure and soil water properties. To model plastic residues of micro-bioplastics, spherical or spherical-like poly-3-hydroxybutyrate (PHB) was used, while polyethylene terephthalate (PET) was used as a model of conventional microplastics. The results suggest that both types of plastic residues affect SOM properties, including physical stability (represented by water molecule bridges), water binding (represented by decreased desorption enthalpy or faster desorption), and the stability of SOM aliphatic crystallites. The results further showed that the polyester-based microplastics and micro-bioplastics affected the SOM abiotic characteristics and that therefore the observed effects cannot be attributed solely to changes in the whole soil structure. Notably, similar adverse effects on SOM were observed for both tested plastic residues, although the effect of PHB was less pronounced compared to that of PET.

Polyhydroxyalkanoates production from short and medium chain carboxylic acids by Paracoccus homiensis

The aim of this study was to evaluate an effect of short and medium chain carboxylic acids (CAs) rich stream derived from acidogenic mixed culture fermentation of acid whey on polyhydroxyalkanoates (PHAs) synthesis by Paracoccus homiensis and compare it with the impact of individual synthetic CAs. The obtained results confirmed that the analyzed bacterium is able to metabolize synthetic CAs as the only carbon sources in the growth medium with maximum PHAs production yields of 26% of cell dry mass (CDM). The replacement of the individual CAs by a CAs-rich residual stream was found to be beneficial for the Paracoccus homiensis growth. The highest biomass concentration reached about 2.5 g/L with PHAs content of 17% of CDM. The purified PHAs were identified as poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by applying gas chromatography coupled with mass spectrometry, Fourier transform infrared spectroscopic spectra and UV–Vis spectra. Furthermore, a differential scanning calorimetric, thermogravimetric and water contact angle analysis proved that the extracted copolymers have useful properties. The obtained data are promising in the perspective of developing a microbial PHAs production as a part of an integrated valorization process of high CAs content waste-derived streams.

Valorization of agro-wastes for the biosynthesis and characterization of polyhydroxybutyrate by Bacillus sp. isolated from rice bran dumping yard

Investigations have been made to determine the usage of inexpensive agro-waste products as an alternative carbon source for the production of degradable bacterial polyester. Among 33 bacterial isolates, a gram-positive bacterium PPECLRB-16 isolated from rice bran dumping yard was found to accumulate a relatively higher quantity of PHB and identified as Bacillus sp. through 16S rRNA gene sequence analysis. The higher PHB producing bacterial isolate was grown with different inexpensive agro-wastes to determine the suitable carbon source for its growth and PHB production. The one-factor-at-a-time approach comparatively enhanced PHB yield (5.64 g/L) when grown for 48 h with 1.5% (w/v) of defatted oil cake at a pH of 7.0. The bacterially accumulated PHB was isolated from the cells, purified, and characterized using solid-state ¹³C NMR, FT-IR, Powder XRD, TGA, GPC, Tensile and HR-SEM analyses. The hydrophobicity and printing accessibility of recovered PHB were demonstrated using contact angle measurement by coating on different surfaces. The results obtained in the present investigation have thrown light on the potential usage of agro-waste by-products, mainly oil cake, as an appropriate carbon source for the commercial production of PHB by Bacillus sp. in a cost-effective way.

Biosynthesis and Characteristics of Polyhydroxyalkanoates. 1. Polyhydroxybutyrates of Azotobacter vinelandii N-15

The biosynthesis of cellular polymers of Azotobacter vinelandii N-15 strain using molasses as a carbon source has been optimized. The highest yield of polymer (25.8 % of cell mass) was obtained on a nutrient medium with a molasses concentration of 50 g/l. Using TL-chromatography and IR-spectroscopy the obtained product was identified as polyhydroxybutyrate (PHB), and its properties were investigated. The wetting contact angle was used to characterize the biopolymer film surface properties. According to the results of thermal and thermomechanical studies, it was found that the obtained РHB is characterized by a high thermal stability and heat resistance: the melting point is 462 K; deep destruction and thermooxidative processes begin at the temperatures above 567 K.

Statistical augmentation of polyhydroxybutyrate production by Isoptericola variabilis: Characterization, moulding, in vitro cytocompatibility and biodegradability evaluation

This study aimed to explore the production of polyhydroxybutyrate (PHB), a polyhydroxyalkanoate (PHA), which has been widely considered as a potential substitute for the synthetic polymers. Among 53 actinomycete isolates, 11 of them were found to be PHB positive and the quantity of PHB from the positive isolates varied from 10.5 to 29.82 wt% on a dry cell weight basis. A strain designated as PPLAT 012, accumulated relatively higher PHB and has been identified as Isoptericola variabilis by 16S rRNA gene sequence analysis. An effort has also been made to optimize the PHB production by the hyper-producing strain using the conventional, one-factor-at-a-time, and statistical response surface methodologies and the maximum PHB production (46.18%) in DSMZ medium, amended with 12% glucose and 9% potassium nitrate with a pH of 7.0. Further, the characteristic properties such as processability, cytocompatibility and biodegradability of the extracted PHB was also demonstrated. The physical properties of the recovered PHB was further improved by blending with PLA and the resultant blends were characterized. The present investigation has demonstrated that the isolate, Isoptericola variabilis, could be utilized as a potential source for the production of PHB with desirable characteristics, suitable for biomedical applications.

Comparative Structure-Property Characterization of Poly(3-Hydroxybutyrate-Co-3-Hydroxyvalerate)s Films under Hydrolytic and Enzymatic Degradation: Finding a Transition Point in 3-Hydroxyvalerate Content

The hydrolytic and enzymatic degradation of polymer films of poly(3-hydroxybutyrate) (PHB) of different molecular mass and its copolymers with 3-hydroxyvalerate (PHBV) of different 3-hydroxyvalerate (3-HV) content and molecular mass, 3-hydroxy-4-methylvalerate (PHB4MV), and polyethylene glycol (PHBV-PEG) produced by the Azotobacter chroococcum 7B by controlled biosynthesis technique were studied under in vitro model conditions. The changes in the physicochemical properties of the polymers during their in vitro degradation in the pancreatic lipase solution and in phosphate-buffered saline for a long time (183 days) were investigated using different analytical techniques. A mathematical model was used to analyze the kinetics of hydrolytic degradation of poly(3-hydroxyaklannoate)s by not autocatalytic and autocatalytic hydrolysis mechanisms. It was also shown that the degree of crystallinity of some polymers changes differently during degradation in vitro. The total mass of the films decreased slightly up to 8-9% (for the high-molecular weight PHBV with the 3-HV content 17.6% and 9%), in contrast to the copolymer molecular mass, the decrease of which reached 80%. The contact angle for all copolymers after the enzymatic degradation decreased by an average value of 23% compared to 17% after the hydrolytic degradation. Young's modulus increased up to 2-fold. It was shown that the effect of autocatalysis was observed during enzymatic degradation, while autocatalysis was not available during hydrolytic degradation. During hydrolytic and enzymatic degradation in vitro, it was found that PHBV, containing 5.7-5.9 mol.% 3-HV and having about 50% crystallinity degree, presents critical content, beyond which the structural and mechanical properties of the copolymer have essentially changed. The obtained results could be applicable to biomedical polymer systems and food packaging materials.

Whey valorization for sustainable polyhydroxyalkanoate production by Bacillus megaterium: Production, characterization and in vitro biocompatibility evaluation

Polyhydroxyalkanoates (PHAs) are biodegradable biopolymers acclaimed as an eco-friendly substitute of hazardously polluting petrochemical plastics. Using industrial by-products as PHA feedstocks could improve its process economics and market implementation. Valorizing the plenteous, nutritive pollutant whey as PHA production feedstock would be an excellent whey management strategy. This study aimed at whole/crude whey valorization for value-added PHA production using B. megaterium Ti3 innate protease, alleviating pretreatments. Response surface methodology (RSM) media optimization ascertained whey (%) as the key influential factor (p < 0.05). The optimized and validated RSM model (R², 0.991; desirability, 1) facilitated 12.2, 11.5 folds increased PHA yield (2.20 ± 0.11 g/L) and productivity (0.05 gPHA/L/h). A positive correlation (r², 0.95 and 0.87) was observed amid the innate enzymes (protease and lipase) and PHA production. The PHA was characterized by ¹H and ¹³C NMR, GPC, TGA, and was identified as poly (3-hydroxybutyrate) (P3HB) by NMR. A significantly reduced roughness (110 ± 5.6 nm); increased hydrophilicity (8.6 ± 0.3 and 8.7 ± 0.5%), protein adsorption (68.75 ± 2.55 μg/cm²) and 1.6 folds higher biocompatibility achieved on poly (ethylene glycol) (PEG) blending compared to neat P3HB films. This is the first report on B. megaterium innate enzyme based whey valorization to PHAs also demonstrating its biomedical applicability.

Azotobacter vinelandii: the source of 100 years of discoveries and many more to come

Azotobacter vinelandii has been studied for over 100 years since its discovery as an aerobic nitrogen-fixing organism. This species has proved useful for the study of many different biological systems, including enzyme kinetics and the genetic code. It has been especially useful in working out the structures and mechanisms of different nitrogenase enzymes, how they can function in oxic environments and the interactions of nitrogen fixation with other aspects of metabolism. Interest in studying A. vinelandii has waned in recent decades, but this bacterium still possesses great potential for new discoveries in many fields and commercial applications. The species is of interest for research because of its genetic pliability and natural competence. Its features of particular interest to industry are its ability to produce multiple valuable polymers - bioplastic and alginate in particular; its nitrogen-fixing prowess, which could reduce the need for synthetic fertilizer in agriculture and industrial fermentations, via coculture; its production of potentially useful enzymes and metabolic pathways; and even its biofuel production abilities. This review summarizes the history and potential for future research using this versatile microbe.

Bioconversion of fish solid waste into PHB using Bacillus subtilis based submerged fermentation process

Currently, one of the major problem affecting the world is solid waste management, predominantly petroleum-based plastic and fish solid waste (FSW). However, it is very difficult to reduce the consumption of plastic as well as fish products, but it is promising to convert FSW to biopolymer to reduce eco-pollution. On account of that, the bioconversion of FSW extract to polyhydroxybutyrate (PHB) was undertaken by using Bacillus subtilis (KP172548). Under optimized conditions, 1.62 g/L of PHB has been produced by the bacterium. The purified compound was further characterized by advanced analytical technologies to elucidate its chemical structure. Results indicated that the biopolymer was found to be PHB, the most common homopolymer of polyhydroxyalkanoates (PHAs). This is the first report demonstrating the efficacy of B. subtilis to utilize FSW extract to produce biopolymer. The biocompatibility of the PHB against murine macrophage cell line RAW264.7 demonstrated that, it was comparatively less toxic, favourable for surface attachment and proliferation in comparison with poly-lactic acid (PLA) and commercially available PHB. Thus, further exploration is highly indispensable to use FSW extract as a substrate for production of PHB at pilot scale.

Fabrication and Characterization of Carbon Fiber-Reinforced Nano-Hydroxyapatite/Polyamide46 Biocomposite for Bone Substitute

Background

Ideal bone repair material should be of good biocompatibility and high bioactivity. Besides, their mechanical properties should be equivalent to those of natural bone. The objective of this study was to fabricate a novel biocomposite suitable for load-bearing bone defect repair.

Material/Methods

A novel biocomposite composed of carbon fiber, hydroxyapatite and polyamide46 (CF/HA/PA46) was fabricated, and its mechanical performances and preliminary cell responses were evaluated to explore its feasibility for load-bearing bone defect repair.

Results

The resultant CF/HA/PA46 biocomposite showed a bending strength of 159–223 MPa, a tensile strength of 127–199 MPa and a tensile modulus of 7.7–10.8 GPa, when the CF content was 5–20% (mass fraction) in biocomposite. The MG63 cells, showing an osteogenic phenotype, were well adhered and spread on the surface of the CF/HA/PA46 biocomposite. Moreover, the cells vitality and differentiation on the CF/HA/PA46 biocomposite surface were obviously increased during the culture time and there was no significant difference between the CF/HA/PA46 biocomposite and HA/PA (as control) at all the experimental time (P>0.05).

Conclusions

The addition of CF into HA/PA46 composite manifest improved the mechanical performances and showed favorable effects on biocompatibility of MG63 cells. The obtained biocomposite has high potential for bone repair in load-bearing sites.

Modification of titanium surfaces by adding antibiotic-loaded PHB spheres and PEG for biomedical applications

Novel researches are focused on the prevention and management of post-operative infections. To avoid this common complication of implant surgery, it is preferable to use new biomaterials with antibacterial properties. Therefore, the aim of this work is to develop a method of combining the antibacterial properties of antibiotic-loaded poly(3-hydroxybutyrate) (PHB) nano- and micro-spheres and poly(ethylene glycol) (PEG) as an antifouling agent, with titanium (Ti), as the base material for implants, in order to obtain surfaces with antibacterial activity. The Ti surfaces were linked to both PHB particles and PEG by a covalent bond. This attachment was carried out by firstly activating the surfaces with either Oxygen plasma or Sodium hydroxide. Further functionalization of the activated surfaces with different alkoxysilanes allows the reaction with PHB particles and PEG. The study confirms that the Ti surfaces achieved the antibacterial properties by combining the antibiotic-loaded PHB spheres, and PEG as an antifouling agent.

Biosynthesis of poly(3-hydroxybutyrateco-3-hydroxy-4-methylvalerate) by Strain Azotobacter chroococcum 7B

Production of novel polyhydroxyalkanoates (PHAs), biodegradable polymers for biomedical applications, and biomaterials based on them is a promising trend in modern bioengineering. We studied the ability of an effective strain-producer Azotobacter chroococcum 7B to synthesize not only poly(3-hydroxybutyrate) homopolymer (PHB) and its main copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), but also a novel copolymer, poly(3-hydroxybutyrate-co-3-hydroxy-4-methylvalerate) (PHB4MV). For the biosynthesis of PHB copolymers, we used carboxylic acids as additional carbon sources and monomer precursors in the chain of synthesized copolymers. The main parameters of these polymers' biosynthesis were determined: strain-producer biomass yield, polymer yield, molecular weight and monomer composition of the synthesized polymers, as well as the morphology of A. chroococcum 7B bacterial cells. The physico-chemical properties of the polymers were studied using nuclear magnetic resonance spectroscopy (NMR), differential scanning calorimetry (DSC), contact angle test, and other methods. In vitro biocompatibility of the obtained polymers was investigated using stromal cells isolated from the bone marrow of rats with the XTT cell viability test. The synthesis of the novel copolymer PHB4MV and its chemical composition were demonstrated by NMR spectroscopy: the addition of 4-methylvaleric acid to the culture medium resulted in incorporation of 3-hydroxy-4-methylvalerate (3H4MV) monomers into the PHB polymer chain (0.6 mol%). Despite the low molar content of 3H4MV in the obtained copolymer, its physico-chemical properties were significantly different from those of the PHB homopolymer: it has lower crystallinity and a higher contact angle, i.e. the physico-chemical properties of the PHB4MV copolymer containing only 0.6 mol% of 3H4MV corresponded to a PHBV copolymer with a molar content ranging from 2.5% to 7.8%. In vitro biocompatibility of the obtained PHB4MV copolymer, measured in the XTT test, was not statistically different from the cell growth of PHB and PHBV polymers, which make its use possible in biomedical research and development.

Biosynthesis of poly(3-hydroxybutyrate) copolymers by Azotobacter chroococcum 7B: A precursor feeding strategy

A precursor feeding strategy for effective biopolymer producer strain Azotobacter chroococcum 7B was used to synthesize various poly(3-hydroxybutyrate) (PHB) copolymers. We performed experiments on biosynthesis of PHB copolymers by A. chroococcum 7B using various precursors: sucrose as the primary carbon source, various carboxylic acids and ethylene glycol (EG) derivatives [diethylene glycol (DEG), triethylene glycol (TEG), poly(ethylene glycol) (PEG) 300, PEG 400, PEG 1000] as additional carbon sources. We analyzed strain growth parameters including biomass and polymer yields as well as molecular weight and monomer composition of produced copolymers. We demonstrated that A. chroococcum 7B was able to synthesize copolymers using carboxylic acids with the length less than linear 6C, including poly(3-hydroxybutyrate-co-3-hydroxy-4-methylvalerate) (PHB-4MHV) using Y-shaped 6C 3-methylvaleric acid as precursor as well as EG-containing copolymers: PHB-DEG, PHB-TEG, PHB-PEG, and PHB-HV-PEG copolymers using short-chain PEGs (with n ≤ 9) as precursors. It was shown that use of the additional carbon sources caused inhibition of cell growth, decrease in polymer yields, fall in polymer molecular weight, decrease in 3-hydroxyvalerate content in produced PHB-HV-PEG copolymer, and change in bacterial cells morphology that were depended on the nature of the precursors (carboxylic acids or EG derivatives) and the timing of its addition to the growth medium.

Microbial production of polyhydroxyalkanoates (PHAs) and its copolymers: A review of recent advancements

Traditional mineral oil based plastics are important commodity to enhance the comfort and quality of life but the accumulation of these plastics in the environment has become a major universal problem due to their low biodegradation. Solution to the plastic waste management includes incineration, recycling and landfill disposal methods. These processes are very time consuming and expensive. Biopolymers are important alternatives to the petroleum-based plastics due to environment friendly manufacturing processes, biodegradability and biocompatibility. Therefore use of novel biopolymers, such as polylactide, polysaccharides, aliphatic polyesters and polyhydroxyalkanoates is of interest. PHAs are biodegradable polyesters of hydroxyalkanoates (HA) produced from renewable resources by using microorganisms as intracellular carbon and energy storage compounds. Even though PHAs are promising candidate for biodegradable polymers, however, the production cost limit their application on an industrial scale. This article provides an overview of various substrates, microorganisms for the economical production of PHAs and its copolymers. Recent advances in PHAs to reduce the cost and to improve the performance of PHAs have also been discussed.

Culturing of Mouse Mesenchymal Stem Cells on Poly-3-Hydroxybutyrate Scaffolds

We studied the possibility of long-term culturing of mouse mesenchymal stem cells on a porous scaffold made of biocompatible polymer poly-3-hydroxybutyrate. The cells remained viable for at least 2 months and passed more than 65 population doublings in culture. Culturing on the scaffold did not change surface phenotype of cells. 3D poly-3-hydroxybutyrate scaffolds are appropriate substrate for long-term culturing of mesenchymal stem cells.

A novel nucleic lateral flow assay for screening of PHA-producing haloarchaea

Polyhydroxyalkanoates (PHAs) are important for biodegradable plastic production, and prokaryotes play a very important role in PHA production. PHA synthase is a key enzyme for the polymerization of PHAs. There are four classes of PHA synthase. The phaC gene is necessary for the production of all classes of PHA synthase, whereas the phaE gene is necessary for the production of class III PHA synthase. This gene is a biomarker for microorganisms that contain class III PHA synthase, such as haloarchaea. Standard techniques for screening of PHA-producing haloarchaea require time for culturing and have poor specificity and sensitivity. Thus, the phaE biosensor was developed to overcome these issues. PCR and DNA lateral flow biosensor techniques were combined for construction of the phaE biosensor. The phaE biosensor has a high specificity for PHA-producing haloarchaea. The lowest amount of genomic DNA of Haloquadratum walsbyi DSM 16854 that the phaE gene could be detected by the biosensor was approximately 250 fg. The phaE biosensor can be applied for screening of PHA-producing haloarchaea from environmental samples. The phaE biosensor is easy to handle and dispose. For screening PHA-producing haloarchaea, the phaE biosensor requires less time and costs less than the standard methods.

Biotechnological strategies to improve production of microbial poly-(3-hydroxybutyrate): a review of recent research work

Poly-(3-hydroxybutyrate) [P(3HB)] is a polyester synthesized as a carbon and energy reserve material by a wide number of bacteria. This polymer is characterized by its thermo-plastic properties similar to plastics derived from petrochemical industry, such as polyethylene and polypropylene. Furthermore, P(3HB) is an inert, biocompatible and biodegradable material which has been proposed for several uses in medical and biomedical areas. Currently, only few bacterial species such as Cupriavidus necator, Azohydromonas lata and recombinant Escherichia coli have been successfully used for P(3HB) production at industrial level. Nevertheless, in recent years, several fermentation strategies using other microbial models such as Azotobacter vinelandii, A. chroococcum, as well as some methane-utilizing species, have been developed in order to improve the P(3HB) production and also its mean molecular weight.

[Biocompatibility of electrospun poly(3-hydroxybutyrate) and its composites scaffolds for tissue engineering]

Development of biodegradable polymers-based scaffolds for tissue engineering is a promising trend in bioengineering. The electrospun scaffolds from poly(3-hydroxybutyrate) (PHB) were produced using different additives that changed the physical and chemical characteristics of the products. As a result, the construct consisting of interwoven threads of different diameter (0.8-3.4 mm) were obtained, the smallest diameter was observed in the threads from the PHB using tetrabutilammonium iodide (TBAI) and titanium oxide II (TiO2) as additives. Mesenchymal stem cells (MSC) were cultivated on the scaffolds for the biocompatibility evaluation of obtained materials. Cells viability was determined by the XTT assay test. It was shown that the scaffold from the interwoven threads of lowest diameter is most favorable for MSC growth in comparison with the polymer film and scaffolds from the threads of larger diameter. Thus, it was shown that the biocompatibility of electrospun PHB scaffolds depended on their microstructure. The obtained data can be used for development of scaffolds for tissue engineering.