Use of polyethyleneimine polymer in cell culture as attachment factor and lipofection enhancer

PEI-based functional materials: Fabrication techniques, properties, and biomedical applications

Cationic polymers have recently attracted considerable interest as research breakthroughs for various industrial and biomedical applications. They are particularly interesting due to their highly positive charges, acceptable physicochemical properties, and ability to undergo further modifications, making them attractive candidates for biomedical applications. Polyethyleneimines (PEIs), as the most extensively utilized polymers, are one of the valuable and prominent classes of polycations. Owing to their flexible polymeric chains, broad molecular weight (MW) distribution, and repetitive structural units, their customization for functional composites is more feasible. The specific beneficial attributes of PEIs could be introduced by purposeful functionalization or modification, long service life, biocompatibility, and distinct geometry. Therefore, PEIs have significant potential in biotechnology, medicine, and bioscience. In this review, we present the advances in PEI-based nanomaterials, their transfection efficiency, and their toxicity over the past few years. Furthermore, the potential and suitability of PEIs for various applications are highlighted and discussed in detail. This review aims to inspire readers to investigate innovative approaches for the design and development of next-generation PEI-based nanomaterials possessing cutting-edge functionalities and appealing characteristics.

Analysis of the Guanine Nucleotide-Bound State of KRAS by Ion-Pair Reversed-Phase High-Performance Liquid Chromatography

Guanine nucleotides can be quantitatively analyzed by high-performance liquid chromatography (HPLC). Here we describe an ion-pair reversed-phase HPLC (IP-RP-HPLC)-based method, which enables analyzing GDP and GTP bound to small GTPases immunoprecipitated from cells. The activation status of FLAG-KRAS expressed in HEK293T cells can be investigated with the IP-RP-HPLC method. This method also can be adapted to determine the effects of compounds such as the KRAS/G12C inhibitor sotorasib on the activation status of FLAG-KRAS in the cells.

Effective methods for immobilization of non-adherent Pv11 cells while maintaining their desiccation tolerance

Pv11 was derived from embryos of the sleeping chironomid Polypedilum vanderplanki, which displays an extreme form of desiccation tolerance known as anhydrobiosis. Pre-treatment with a high concentration of trehalose allows Pv11 cells to enter anhydrobiosis. In the dry state, Pv11 cells preserve transgenic luciferase while retaining its activity. Thus, these cells could be utilized for dry-preserving antibodies, enzymes, signaling proteins or other valuable biological materials without denaturation. However, Pv11 cells grow in suspension, which limits their applicability; for instance, they cannot be integrated into microfluidic devices or used in devices such as sensor chips. Therefore, in this paper, we developed an effective immobilization system for Pv11 cells that, crucially, allows them to maintain their anhydrobiotic potential even when immobilized. Pv11 cells exhibited a very high adhesion rate with both biocompatible anchor for membrane (BAM) and Cell-Tak coatings, which have been reported to be effective on other cultured cells. We also found that Pv11 cells immobilized well to uncoated glass if handled in serum-free medium. Interestingly, Pv11 cells showed desiccation tolerance when trehalose treatment was done prior to immobilization of the cells. In contrast, trehalose treatment after immobilization of Pv11 cells resulted in a significant decrease in desiccation tolerance. Thus, it is important to induce anhydrobiosis before immobilization. In summary, we report the successful development of a protocol for the dry preservation of immobilized Pv11 cells.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10616-023-00592-0.

Repression motif in HSF1 regulated by phosphorylation

The heat shock factor 1 (HSF1) is a transcription factor that itself is a sensor for stress and integrates various intrinsic or environmental stress sensing pathways. Thus HSF1 orchestrates the heat shock response (HSR) by translating these pathways into a distinct transcriptional program that aids the cells to cope with and adapt to proteotoxic stress. Although heavily researched the regulation of HSF1 activation is still not completely understood. A conserved reaction to stress is the hyperphosphorylation of the otherwise confined constitutive phosphorylated HSF1. Therefore, this stress specific phosphorylation is believed to be involved in the regulatory mechanism and hence, was and is focus of many studies, ascribing various effects to single phosphorylation sites. To gain additional insight into effects of phosphorylation, HSF1 carrying amino acid substitutions on up to 18 amino acids were tested for their transactivation potential on an HSR reporter plasmid. A pattern of eleven phosphor-mimicking and diminishing amino acid substitutions on well-known phosphorylation sites of HSF1 were introduced to produce transcriptional active [11 M(+)] or repressed [11 M(-)] phenotypes. It could be confirmed that heat activates HSF1 regardless of phosphorylation. Distinct cellular stress, obtained by chemical HSR inducers or mimicked by a constitutively active HSF1, showed clear differences in the activation potential of HSF1-11 M(+) and 11 M(-). Further refinement to the single amino acid level identified the S303/307 double-phosphorylation motif, wherein phosphorylation of S303 was sole responsible for the repressing effect. The effect could be reproduced in different cell lines and is not entirely based on degradation. A small repression motif could be dissociated from the HSF1 context, which is still capable of repressing the background transcription of a specifically designed reporter plasmid. Taken together these results indicate, that besides already described mechanisms of pS303/307 mediated repression of HSF1 activation, an additional mechanism repressing the transcriptional output of the entire HSE containing promoter is mediated by this small repressive motif.

Enhancing structural plasticity of PC12 neurons during differentiation and neurite regeneration with a catalytically inactive mutant version of the zRICH protein

BACKGROUND

Studies of the molecular mechanisms of nerve regeneration have led to the discovery of several proteins that are induced during successful nerve regeneration. RICH proteins were identified as proteins induced during the regeneration of the optic nerve of teleost fish. These proteins are 2',3'-cyclic nucleotide, 3'-phosphodiesterases that can bind to cellular membranes through a carboxy-terminal membrane localization domain. They interact with the tubulin cytoskeleton and are able to enhance neuronal structural plasticity by promoting the formation of neurite branches.

RESULTS

PC12 stable transfectant cells expressing a fusion protein combining a red fluorescent protein with a catalytically inactive mutant version of zebrafish RICH protein were generated. These cells were used as a model to analyze effects of the protein on neuritogenesis. Differentiation experiments showed a 2.9 fold increase in formation of secondary neurites and a 2.4 fold increase in branching points. A 2.2 fold increase in formation of secondary neurites was observed in neurite regeneration assays.

CONCLUSIONS

The use of a fluorescent fusion protein facilitated detection of expression levels. Two computer-assisted morphometric analysis methods indicated that the catalytically inactive RICH protein induced the formation of branching points and secondary neurites both during differentiation and neurite regeneration. A procedure based on analysis of random field images provided comparable results to classic neurite tracing methods.

Detection of SARS-CoV-2 in saliva by a low-cost LSPR-based sensor

The SARS-CoV-2 pandemic started more than 3 years ago, but the containment of the spread is still a challenge. Screening is imperative for informed decision making by government authorities to contain the spread of the virus locally. The access to screening tests is disproportional, due to the lack of access to reagents, equipment, finances or because of supply chain disruptions. Low and middle-income countries have especially suffered with the lack of these resources. Here, we propose a low cost and easily constructed biosensor device based on localized surface plasmon resonance, or LSPR, for the screening of SARS-CoV-2. The biosensor device, dubbed "sensor" for simplicity, was constructed in two modalities: (1) viral detection in saliva and (2) antibody against COVID in saliva. Saliva collected from 18 patients were tested in triplicates. Both sensors successfully classified all COVID positive patients (among hospitalized and non-hospitalized). From the COVID negative patients 7/8 patients were correctly classified. For both sensors, sensitivity was determined as 100% (95% CI 79.5-100) and specificity as 87.5% (95% CI 80.5-100). The reagents and equipment used for the construction and deployment of this sensor are ubiquitous and low-cost. This sensor technology can then add to the potential solution for challenges related to screening tests in underserved communities.

Core-Shell Nanostructured Drug Delivery Platform Based on Biocompatible Metal-Organic Framework-Ligated Polyethyleneimine for Targeted Hepatocellular Carcinoma Therapy

Multifunctional nanosized metal-organic frameworks (NMOFs) have advanced rapidly over the past decade to develop drug delivery systems (DDSs). These material systems still lack precise and selective cellular targeting, as well as the fast release of the quantity of drugs that are simply adsorbed within and on the external surface of nanocarriers, which hinders their application in the drug delivery. Herein, we designed a biocompatible Zr-based NMOF with an engineered core and the hepatic tumor-targeting ligand, glycyrrhetinic acid grafted to polyethyleneimine (PEI) as the shell. The improved core-shell serves as a superior nanoplatform for efficient controlled and active delivery of the anticancer drug doxorubicin (DOX) against hepatic cancer cells (HepG2 cells). In addition to their high loading capacity of 23%, the developed nanostructure DOX@NMOF-PEI-GA showed an acidic pH-stimulated response and extended the drug release time to 9 days as well as enhanced the selectivity toward the tumor cells. Interestingly, the DOX-free nanostructures showed a minimal toxic effect on both normal human skin fibroblast (HSF) and hepatic cancer cell line (HepG2), but the DOX-loaded nanostructures exhibited a superior killing effect toward the hepatic tumor, thus opening the way for the active drug delivery and achieving efficient cancer therapy applications.

TMEM106B regulates microglial proliferation and survival in response to demyelination

TMEM106B, a lysosomal transmembrane protein, has been closely associated with brain health. Recently, an intriguing link between TMEM106B and brain inflammation has been discovered, but how TMEM106B regulates inflammation is unknown. Here, we report that TMEM106B deficiency in mice leads to reduced microglia proliferation and activation and increased microglial apoptosis in response to demyelination. We also found an increase in lysosomal pH and a decrease in lysosomal enzyme activities in TMEM106B-deficient microglia. Furthermore, TMEM106B loss results in a significant decrease in the protein levels of TREM2, an innate immune receptor essential for microglia survival and activation. Specific ablation of TMEM106B in microglia results in similar microglial phenotypes and myelination defects in mice, supporting the idea that microglial TMEM106B is critical for proper microglial activities and myelination. Moreover, the TMEM106B risk allele is associated with myelin loss and decreased microglial numbers in humans. Collectively, our study unveils a previously unknown role of TMEM106B in promoting microglial functionality during demyelination.

Progranulin inhibits phospholipase sPLA2-IIA to control neuroinflammation

Mutations in the granulin (GRN) gene, resulting in haploinsufficiency of the progranulin (PGRN) protein, are a leading cause of frontotemporal lobar degeneration (FTLD) and PGRN polymorphisms are associated with Alzheimer's disease (AD) and Parkinson's disease (PD). PGRN is a key regulator of microglia-mediated inflammation but the mechanism is still unknown. Here we report that PGRN interacts with sPLA2-IIA, a secreted phospholipase involved in inflammatory responses, to downregulate sPLA2-IIA activities and levels. sPLA2-IIA expression modifies PGRN deficiency phenotypes in mice and sPLA2-IIA inhibition rescues inflammation and lysosomal abnormalities in PGRN deficient mice. Furthermore, FTLD patients with GRN mutations show increased levels of sPLA2-IIA in astrocytes. Our data support sPLA2-IIA as a critical target for PGRN and a novel therapeutic target for FTLD-GRN.

Ultra-High Molecular Weight Polyethylene Modifications Produced by Carbon Nanotubes and Fe2O3 Nanoparticles

Thin sheets of ultra-high molecular weight polyethylene (UHMWPE), both in pristine form and containing carbon nanotubes (CNTs) or Fe₂O₃ nanoparticles (NPs) at different concentrations, were prepared. The CNT and Fe₂O₃ NP weight percentages used ranged from 0.01% to 1%. The presence of CNTs and Fe₂O₃ NPs in UHMWPE was confirmed by transmission and scanning electron microscopy and by energy dispersive X-ray spectroscopy analysis (EDS). The effects of the embedded nanostructures on the UHMWPE samples were studied using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and UV-Vis absorption spectroscopy. The ATR-FTIR spectra show the characteristic features of the UHMWPE, CNTs, and Fe₂O₃. Concerning the optical properties, regardless of the type of embedded nanostructures, an increase in the optical absorption was observed. The allowed direct optical energy gap value was determined from the optical absorption spectra: in both cases, it decreases with increasing CNT or Fe₂O₃ NP concentrations. The obtained results will be presented and discussed.

Evidence for progesterone acting as an inhibitor of stress axis via stimulating pituitary neuropeptide B/W receptor 2 (NPBWR2) expression in chickens

In vertebrates, the hypothalamus-pituitary-adrenal gland (HPA) axis is the main endocrine pathway regulating the stress response, thus also called the stress axis. It has been well-accepted that the stress axis is tightly controlled by both hypothalamic stimulators and inhibitors [e.g. corticotropin (ACTH)-releasing inhibitory factor (CRIF)]. However, the identity of authentic CRIF remains unclear for decades. Recently, neuropeptide W (NPW) was proved to be the physiological CRIF in chickens. Together with its functional receptor (NPBWR2), they play critical roles in attenuating the activity of the chicken stress axis. Because increasing pieces of evidence suggested that sex steroids could regulate the stress axis, using chicken as a model, we investigated whether the newly identified CRIF and its receptor are under the control of sex steroids in this study. Our results showed that: (1) expression of NPW-NPBWR2 in the hypothalamus-pituitary axis was sexually dimorphic and developmental stage-dependent; (2) progesterone (P₄), rather than 17β-estradiol (E₂) and dihydrotestosterone (DHT), could dose- and time-dependently upregulate NPBWR2 expression, which was accompanied with the decrease of ACTH synthesis and secretion, in cultured pituitary cells; (3) intraperitoneal injection of P₄ could elevate the mRNA level of pituitary NPBWR2; (4) P₄-stimulated NPBWR2 expression was relevant to both nPR-mediated genomic action and mPRs-triggered nongenomic route associated with MEK/ERK, PI3K/AKT cascade, and calcium influx. To our knowledge, our results discover a novel route of sex steroids in modulating the stress axis of chickens, which lays a foundation to reveal the complicated interaction network between reproduction and stress axes in chickens.

In vitro magnetic hyperthermia properties of angle-shaped superparamagnetic iron oxide nanoparticles synthesized by a bromide-assisted polyol method

Currently, research on superparamagnetic iron oxide nanoparticles (SPIONs) for magnetic hyperthermia applications is steadily increasing. In this work, SPIONs were synthesized by the bromide-assisted polyol method and angle-shaped SPIONs were successfully generated with the optimized concentration of bromide. The influence of bromide concentration on the shape of the generated SPIONs as well as the heating characteristics under an alternating magnetic field (AMF) was thoroughly investigated. At a concentration of 20 mg mL^-1 of the angle-shaped SPIONs, the highest temperature curve up to 23 °C was observed under AMF with 140 Oe and 100 kHz for 10 min. With the biotoxicity assay, no significant cytotoxicity was observed in the normal fibroblast of HFB-141103 as well as tumor cells of U87MG and FSall treated with the angle-shaped SPIONs at a concentration below 100 μg mL^-1. However, significantly decreased cellular viability was observed in tumor cells of U87MG and FSall treated with 100 μg mL^-1 of the angle-shaped SPIONs under AMF with 140 Oe and 100 kHz. Based on these results, it is thought that the angle-shaped SPIONs synthesized by the bromide-assisted polyol method will provide highly efficient magnetic hyperthermia therapy for cancers under biologically safe AMF with 140 Oe and 100 kHz.

Simultaneous Removal of Polymers with Different Ionic Character from Their Mixed Solutions Using Herb-Based Biochars and Activated Carbons

Nettle and the sage herbs were used to obtain carbonaceous adsorbents. For the biochar preparation the precursors were dried and subjected to conventional pyrolysis. Activated carbons were obtained during precursor impregnation with phosphoric(V) acid and multistep pyrolysis. The textural parameters and acidic-basic properties of the obtained adsorbents were studied. The activated carbons prepared from the above herbs were characterized by the largely developed specific surface area. The obtained carbonaceous adsorbents were used for polymer removal from aqueous solution. Poly(acrylic acid) (PAA) and polyethylenimine (PEI) were chosen, due to their frequent presence in wastewater resulting from their extensive usage in many industrial fields. The influence of polymers on the electrokinetic properties of activated carbon were considered. PAA adsorption caused a decrease in the zeta potential and the surface charge density, whereas PEI increased these values. The activated carbons and biochars were used as polymer adsorbents from their single and binary solutions. Both polymers showed the greatest adsorption at pH 3. Poly (acrylic acid) had no significant effect on the polyethylenimine adsorbed amount, whereas PEI presence decreased the amount of PAA adsorption. Both polymers could be successfully desorbed from the activated carbons and biochar surfaces. The presented studies are innovatory and greatly required for the development of new environment protection procedures.

Progranulin-derived granulin E and lysosome membrane protein CD68 interact to reciprocally regulate their protein homeostasis

Progranulin (PGRN) is a glycoprotein implicated in several neurodegenerative diseases. It is highly expressed in microglia and macrophages and can be secreted or delivered to the lysosome compartment. PGRN comprises 7.5 granulin repeats and is processed into individual granulin peptides within the lysosome, but the functions of these peptides are largely unknown. Here, we identify CD68, a lysosome membrane protein mainly expressed in hematopoietic cells, as a binding partner of PGRN and PGRN-derived granulin E. Deletion analysis of CD68 showed that this interaction is mediated by the mucin–proline-rich domain of CD68. While CD68 deficiency does not affect the lysosomal localization of PGRN, it results in a specific decrease in the levels of granulin E but no other granulin peptides. On the other hand, the deficiency of PGRN, and its derivative granulin peptides, leads to a significant shift in the molecular weight of CD68, without altering CD68 localization within the cell. Our results support that granulin E and CD68 reciprocally regulate each other’s protein homeostasis.

Direct addition of poly-lysine or poly-ethylenimine to the medium: A simple alternative to plate pre-coating

For most cell culture experiments, it is indispensable that the cells are firmly anchored to culture plates, withstanding rinsing steps that can create shear forces and tolerating temperature changes without detaching. For semi-adherent cells such as the common HEK 293 or PC-12 cells, this could so far be obtained by time-consuming plate pre-coating with cationic polymer solutions. We report here, that i) pre-coating with the cheaper poly-ethylenimine (PEI) works as well as the commonly used poly-D-lysine (PDL), but more importantly and novel ii) that simple direct addition of either PEI (1.5 μg/ml) or PDL (2 μg/ml) to the cell culture medium results in strongly anchored HEK 293 cells, indistinguishable from ones seeded on pre-coated plates. Therefore, the replacement of plate pre-coating by direct addition of either PEI or PDL gives comparable excellent results, but is highly labour-, time-, and cost-efficient. Moreover, we could show that addition of PDL or PEI also works similarly well in animal-free culture using human platelet lysate instead of fetal bovine serum. Interestingly, additional experiments showed that strong cell attachment requires only cationic polymers but not fetal bovine serum or human platelet lysate added to the medium.

Ring-Opening Polymerization of Triaziridine Compounds in Water: An Extremely Facile Method to Synthesize a Porous Polymer through Polymerization-Induced Phase Separation

Dissolution of trifunctional aziridine compounds, 2,2-bishydroxymethylbutanol-tris[3-(1-aziridinyl)propionate] (3AZ) and tetramethylolmethane-tri-β-aziridinylpropionate (3AZOH), in water initiates a ring-opening polymerization and successful yields the corresponding network polymers via cationic polymerization. The polymerization of 3AZ induced phase separation and produced porous polymers under a wide range of monomer concentrations and polymerization temperatures. The phase separation rate in the 3AZ/water system was estimated by quantifying the turbidity by means of light transmission where transmittance decreased with an increase in the content of phase-separated materials. The rate increased with an increase in reaction temperature. The 3AZ porous polymers showed characteristic surface morphologies, which were formed by connected particles with diameters of about 4-5 μm. The porous polymers were not breakable by the compression test under 50 N. The Young's modulus of the 3AZ porous polymers increased with an increase in polymerization temperature, which may be accounted for by cross-linking through the formation of quaternary ammonium salt formed by a termination reaction. The 3AZ porous polymer absorbed various solvents.

Modelling α-Synuclein Aggregation and Neurodegeneration with Fibril Seeds in Primary Cultures of Mouse Dopaminergic Neurons

To model α-Synuclein (αS) aggregation and neurodegeneration in Parkinson’s disease (PD), we established cultures of mouse midbrain dopamine (DA) neurons and chronically exposed them to fibrils 91 (F91) generated from recombinant human αS. We found that F91 have an exquisite propensity to seed the aggregation of endogenous αS in DA neurons when compared to other neurons in midbrain cultures. Until two weeks post-exposure, somal aggregation in DA neurons increased with F91 concentrations (0.01–0.75 μM) and the time elapsed since the initiation of seeding, with, however, no evidence of DA cell loss within this time interval. Neither toxin-induced mitochondrial deficits nor genetically induced loss of mitochondrial quality control mechanisms promoted F91-mediated αS aggregation or neurodegeneration under these conditions. Yet, a significant loss of DA neurons (~30%) was detectable three weeks after exposure to F91 (0.5 μM), i.e., at a time point where somal aggregation reached a plateau. This loss was preceded by early deficits in DA uptake. Unlike αS aggregation, the loss of DA neurons was prevented by treatment with GDNF, suggesting that αS aggregation in DA neurons may induce a form of cell death mimicking a state of trophic factor deprivation. Overall, our model system may be useful for exploring PD-related pathomechanisms and for testing molecules of therapeutic interest for this disorder.

Interaction of thin polyethyleneimine layer with the iron surface and its effect on the electrochemical behavior

Polymer-coated metals may act as biodegradable orthopedic implants with adjustable corrosion rates. Metallic surfaces represent a dynamic system with specific interactions occurring after the material is implanted into the human body. An additional layer, in the form of polymeric thin film, changes the nature of this metal-body fluids interface. Moreover, the interaction between polymer and metal itself can differ for various systems. Iron-based material modified with a thin layer of polyethyleneimine (PEI) coating was prepared and studied as potential absorbable implant. Computational methods were employed to study the interaction between the metallic surface and polymer functional monomer units at atomic levels. Various spectroscopical and optical methods (SEM, AFM, Confocal, and Raman spectroscopy) were also used to characterize prepared material. Electrochemical measurements have been chosen to study the polymer adsorption process onto the iron surface and corrosion behavior which is greatly influenced by the PEI presence. The adsorption mechanism of PEI onto iron was proposed alongside the evaluation of Fe and Fe-PEI degradation behavior studied using the impedance method. Bonding via amino -NH₂ group of PEI onto Fe and enhanced corrosion rate of coated samples were observed and confirmed.

Polyethyleneimine-Functionalized Carbon Nanotubes Enabling Potent Antimycotic Activity of Lyticase

In this work, the positively-charged polymer polyethyleneimine was used to functionalize carbon nanotubes and activated carbon to load antimycotic enzyme lyticase. Interestingly, polyethyleneimine played a dual role functionalizing carbon materials to synergistically enhance antimycotic activity of loaded lyticase as well as exhibiting its own apparent antimycotic activity, where the enhanced enzymatic activity of loaded lyticase on functionalized carbon nanotubes was more than 2.8 times as high as the activity of free enzyme in solution. The actual activity of loaded lyticase on functionalized carbon nanotubes was applied with Penicillium janthinellum, exhibiting much faster digesting lysis of the bacteria in comparison with free lyticase. The synergistic and potent antimycotic activities from combined action of antimycotic lyticase and polyethyleneimine on carbon nanotubes provides a new antimycotic protection for medicine, food industry, and other biochemical processes.

Modifications on porous absorbable Fe-based scaffolds for bone applications: A review from corrosion and biocompatibility viewpoints

Iron (Fe) and Fe-based scaffolds have become a research frontier in absorbable materials which is inherent to their promising mechanical properties including fatigue strength and ductility. Nevertheless, their slow corrosion rate and low biocompatibility have been their major obstacles to be applied in clinical applications. Over the last decade, various modifications on porous Fe-based scaffolds have been performed to ameliorate both properties encompassing surface coating, microstructural alteration via alloying, and advanced topologically order structural design produced by additive manufacturing (AM) techniques. The recent advent of AM produces topologically ordered porous Fe-based structures with an optimized architecture having controllable pore size and strut thickness, intricate internal design, and larger exposed surface area. This undoubtedly opens up new options for controlling Fe corrosion and its structural strengths. However, the in vitro biocompatibility of the AM porous Fe still needs to be addressed considering its higher corrosion rate due to the larger exposed surface area. This review summarizes the latest progress of the modifications on porous Fe-based scaffolds with a specific focus on their responses on the corrosion behavior and biocompatibility.

Dendritic Polyglycerol Amine: An Enhanced Substrate to Support Long-Term Neural Cell Culture

Long-term stable cell culture is a critical tool to better understand cell function. Most adherent cell culture models require a polymer substrate coating of poly-lysine or poly-ornithine for the cells to adhere and survive. However, polypeptide-based substrates are degraded by proteolysis and it remains a challenge to maintain healthy cell cultures for extended periods of time. Here, we report the development of an enhanced cell culture substrate based on a coating of dendritic polyglycerol amine (dPGA), a non-protein macromolecular biomimetic of poly-lysine, to promote the adhesion and survival of neurons in cell culture. We show that this new polymer coating provides enhanced survival, differentiation and long-term stability for cultures of primary neurons or neurons derived from human induced pluripotent stem cells (hiPSCs). Atomic force microscopy analysis provides evidence that greater nanoscale roughness contributes to the enhanced capacity of dPGA-coated surfaces to support cells in culture. We conclude that dPGA is a cytocompatible, functionally superior, easy to use, low cost and highly stable alternative to poly-cationic polymer cell culture substrate coatings such as poly-lysine and poly-ornithine.

Summary statement

Here, we describe a novel dendritic polyglycerol amine-based substrate coating, demonstrating superior performance compared to current polymer coatings for long-term culture of primary neurons and neurons derived from induced pluripotent stem cells.

Delivery of pDNA to the Lung by Lipopolyplexes Using N-Lauroylsarcosine and Effect on the Pulmonary Fibrosis

In a previous study, we constructed a lung-targeting lipopolyplex containing polyethyleneimine (PEI), 1,2-di-O-octadecenyl-3-trimethylammonium propane (DOTMA), and N-lauroylsarcosine (LS). The lipopolyplex exhibited an extremely high gene expression in the lung after intravenous administration. Here, we optimized the lipopolyplex and used it to deliver a TGF-β1 shRNA to treat refractory pulmonary fibrosis. We constructed several lipopolyplexes with pDNA, various cationic polymers, cationic lipids, and LS to select the most effective formulation. Then, the pDNA encoding shRNA against mouse TGF-β1 was encapsulated in the lipopolyplex and injected into mice with bleomycin-induced pulmonary fibrosis. After optimizing the lipopolyplex, dendrigraft poly-L-lysine (DGL) and DOTMA were selected as the appropriate cationic polymer and lipid, respectively. The lipopolyplex was constructed with a pDNA, DGL, DOTMA, and LS charge ratio of 1:2:2:4 showed the highest gene expression. After intravenous administration of the lipopolyplex, the highest gene expression was observed in the lung. In the in vitro experiment, the lipopolyplex delivered pDNA into the cells via endocytosis. As a result, the lipopolyplex containing pDNA encoding TGF-β1 shRNA significantly decreased hydroxyproline in the pulmonary fibrosis model mice. We have successfully inhibited pulmonary fibrosis using a novel lung-targeting lipopolyplex.

Crotalus atrox venom-induced cellular toxicity: Early wound progression involves reactive oxygen species

Understanding the mechanisms that produce cellular cytotoxicity is fundamental in the field of toxicology. Cytotoxic stimuli can include organic toxins such as hemorrhagic snake venom, which can lead to secondary complications such as the development of necrotic tissue and profuse scarring. These clinical manifestations mimic cytotoxic responses induce by other organic compounds such as organic acids. We used hemorrhagic snake venom and human embryonic kidney cells (HEK 293T) as a model system to better understand the cellular responses involved in venom induced cytotoxicity. Cells stimulated with Crotalus atrox (CA) (western diamondback) venom for 4 or 10 h demonstrated significant cytotoxicity. Results from 2',7'-Dichlorodihydrofluorescein diacetate (H₂ DCF-DA) assays determine CA venom stimulation induces a robust production of reactive oxygen species (ROS) over a 3-h time course. In contrast, pretreatment with polyethylene glycol (PEG)-catalase or N-acetyl cysteine (NAC) prior to CA venom stimulation significantly blunted H₂ DCFDA fluorescence fold changes and showed greater cytoprotective effects than cells stimulated with CA venom alone. Pre- incubating HEK293T cells with the NADPH oxidase (NOX) pan-inhibitor VAS2870 prior venom stimulation significantly minimized the venom-induced oxidative burst at early timepoints (≤2 h). Collectively, our experiments show that pre-application of antioxidants reduces CA venom induce cellular toxicity. This result highlights the importance of ROS in the early stages of cytotoxicity and suggests muting ROS production in noxious injuries may increase positive clinical outcomes.

Neutralization of tetanus toxin by a novel chimeric monoclonal antibody

PURPOSE

Tetanus is a life-threatening disease characterized by muscle spasm caused by neurotoxin of Clostridium tetani. Given the current passive immunotherapy of tetanus with human anti-toxin polyclonal antibodies (PAbs) and the limitations of such preparations, neutralizing monoclonal antibodies (MAbs), especially chimeric or human antibodies with reduced immunogenicity might be considered as an alternative source.

METHODS

A mouse-human chimeric MAb, designated c-1F2C2, was generated and its binding specificities to various recombinant fragments of tetanus toxin, generated in E. coli, were determined. In vivo toxin neutralizing activity of c-1F2C2 was evaluated and compared with that of a commercially available human anti-toxin PAb in a mouse model. The possible mechanisms of toxin neutralizing activity of c-1F2C2 were investigated by assessing its inhibitory effects on toxin receptors binding, including GT1b ganglioside receptor and those expressed on PC12 cells.

RESULTS

In vivo neutralizing assay showed that c-1F2C2 was able to protect mice against tetanus toxin with an estimated potency of 7.7 IU/mg comparing with 1.9 IU/mg of the commercial human anti-toxin PAb for 10 MLD toxin and 10 IU/mg versus 1.9 IU/mg of the PAb for 2.5 MLD toxin. c-1F2C2 recognized fragment C of the toxin, which is responsible for binding of the toxin to its receptor on neuronal cells. Accordingly, the chimeric MAb partially prevented the toxin from binding to its receptors on PC12 cells (37% inhibition).

CONCLUSION

The chimeric MAb c-1F2C2 displayed similar structural and functional characteristics compared to its murine counterpart and might be useful for passive immunotherapy of tetanus.

Circumventing Drug Treatment? Intrinsic Lethal Effects of Polyethyleneimine (PEI)-Functionalized Nanoparticles on Glioblastoma Cells Cultured in Stem Cell Conditions

Simple Summary

Glioblastoma (GB) is the most frequent brain cancer that is highly difficult to treat. As with many cancer types, associated cancer stem cells can act as a reservoir of cancer-initiating cells, constituting a major hurdle for successful therapy. Herein, we report on a discovery of the intrinsic capability of polyethyleneimine-functionalized nanoparticles (PEI-NPs) to selectively eradicate glioblastoma stem cells (GSCs), contrary to current drug-based approaches to target and successfully eradicate GB. Already at negligible doses, PEI-NPs, without any anticancer therapeutic, very potently killed multiple GSC lines but not GB cells without stem cell characteristics. Moreover, PEI-NPs was observed in tumors in mice after both intravenous and intranasal administration, where the latter constitute a non-invasive administration route for drug delivery to the brain. These results, in turn, suggest that PEI-NPs can successfully cross the blood-brain barrier for the eradication of GSCs even without any anticancer drug, whereas the same NP platform can also be used for drug delivery thus opening up potential to reach synergistic therapeutic effects. This highly surprising intrinsic effect of the NP system on both the mechanistic action and specificity of GSC eradication puts forward a promising novel aspect of nanoparticles in medicine.

Abstract

Glioblastoma (GB) is the most frequent malignant tumor originating from the central nervous system. Despite breakthroughs in treatment modalities for other cancer types, GB remains largely irremediable due to the high degree of intratumoral heterogeneity, infiltrative growth, and intrinsic resistance towards multiple treatments. A sub-population of GB cells, glioblastoma stem cells (GSCs), act as a reservoir of cancer-initiating cells and consequently, constitute a significant challenge for successful therapy. In this study, we discovered that PEI surface-functionalized mesoporous silica nanoparticles (PEI-MSNs), without any anti-cancer drug, very potently kill multiple GSC lines cultured in stem cell conditions. Very importantly, PEI-MSNs did not affect the survival of established GB cells, nor other types of cancer cells cultured in serum-containing medium, even at 25 times higher doses. PEI-MSNs did not induce any signs of apoptosis or autophagy. Instead, as a potential explanation for their lethality under stem cell culture conditions, we demonstrate that the internalized PEI-MSNs accumulated inside lysosomes, subsequently causing a rupture of the lysosomal membranes. We also demonstrate blood–brain-barrier (BBB) permeability of the PEI-MSNs in vitro and in vivo. Taking together the recent indications for the vulnerability of GSCs for lysosomal targeting and the lethality of the PEI-MSNs on GSCs cultured under stem cell culture conditions, the results enforce in vivo testing of the therapeutic impact of PEI-functionalized nanoparticles in faithful preclinical GB models.

In-Cell Double Electron-Electron Resonance at Nanomolar Protein Concentrations

Electron paramagnetic resonance (EPR) spectroscopy is an established technique to site-specifically monitor conformational changes of spin-labeled biomolecules. Emerging in-cell EPR approaches aiming to address spin-labeled proteins in their native environment still struggle to reach a broad applicability and to target physiologically relevant protein concentrations. Here, we present a comparative in vitro and in-cell double electron-electron resonance (DEER) study demonstrating that nanomolar protein concentrations are at reach to measure distances up to 4.5 nm between protein sites carrying commercial gadolinium spin labels.

Growth characteristics of human bone marrow mesenchymal stromal cells at cultivation on synthetic polyelectrolyte nanofilms in vitro

This study examines the adhesive properties and cytotoxicity of polyelectrolyte nanofilms from polyethyleneimine (PEI), polyallylamine hydrochloride (PAH) and sodium polystyrene sulfonate (PSS) on human bone marrow mesenchymal stromal cells (h-MSCs) and mouse adipose tissue (m-MSC) in vitro. Films are formed on 24- and 96-well culture plates in the combinations: PEI, PAH, PEI-PSS, PEI-PSS-PAH, PEI-PSS-PEI. An analysis of the culture results show that direct contact of h-MSCs with the PEI surface promotes adhesion (93–95% of adhesive cells versus 40% in the control). On the PEI surface, h-MSCs are evenly distributed, form colonies and 80% monolayer after 72 h of culture, as in the control on culture plastic. On nanofilms from PAH and PEI-PSS-PAH, cells grow in the form of rosette-like colonies with long and thin processes similar to neurites. The cytotoxic properties of PSS were revealed in direct contact with h-MSCs (more than 40% of nonviable cells with damaged plasma membranes). On the PSS surface, cells lost their adhesiveness. To culture and stably grow the cell mass of h-MSCs, it is better to use monolayer nanofilms made of highly adhesive and non-toxic PEI polyelectrolyte, which can bind the growth factors of blood serum and platelet lysate, ensuring the growth of h-MSCs under in vitro deprivation conditions.

A role of the frontotemporal lobar degeneration risk factor TMEM106B in myelination

TMEM106B encodes a lysosomal membrane protein and was initially identified as a risk factor for frontotemporal lobar degeneration. Recently, a dominant D252N mutation in TMEM106B was shown to cause hypomyelinating leukodystrophy. However, how TMEM106B regulates myelination is still unclear. Here we show that TMEM106B is expressed and localized to the lysosome compartment in oligodendrocytes. TMEM106B deficiency in mice results in myelination defects with a significant reduction of protein levels of proteolipid protein (PLP) and myelin oligodendrocyte glycoprotein (MOG), the membrane proteins found in the myelin sheath. The levels of many lysosome proteins are significantly decreased in the TMEM106B-deficient Oli-neu oligodendroglial precursor cell line. TMEM106B physically interacts with the lysosomal protease cathepsin D and is required to maintain proper cathepsin D levels in oligodendrocytes. Furthermore, we found that TMEM106B deficiency results in lysosome clustering in the perinuclear region and a decrease in lysosome exocytosis and cell surface PLP levels. Moreover, we found that the D252N mutation abolished lysosome enlargement and lysosome acidification induced by wild-type TMEM106B overexpression. Instead, it stimulates lysosome clustering near the nucleus as seen in TMEM106B-deficient cells. Our results support that TMEM106B regulates myelination through modulation of lysosome function in oligodendrocytes.

ESCargo: a regulatable fluorescent secretory cargo for diverse model organisms

Membrane traffic can be studied by imaging a cargo protein as it transits the secretory pathway. The best tools for this purpose initially block export of the secretory cargo from the endoplasmic reticulum (ER) and then release the block to generate a cargo wave. However, previously developed regulatable secretory cargoes are often tricky to use or specific for a single model organism. To overcome these hurdles for budding yeast, we recently optimized an artificial fluorescent secretory protein that exits the ER with the aid of the Erv29 cargo receptor, which is homologous to mammalian Surf4. The fluorescent secretory protein forms aggregates in the ER lumen and can be rapidly disaggregated by addition of a ligand to generate a nearly synchronized cargo wave. Here we term this regulatable secretory protein ESCargo (Erv29/Surf4-dependent secretory cargo) and demonstrate its utility not only in yeast cells, but also in cultured mammalian cells, Drosophila cells, and the ciliate Tetrahymena thermophila. Kinetic studies indicate that rapid export from the ER requires recognition by Erv29/Surf4. By choosing an appropriate ER signal sequence and expression vector, this simple technology can likely be used with many model organisms.

T lymphocytes from malignant hyperthermia-susceptible mice display aberrations in intracellular calcium signaling and mitochondrial function

Gain-of-function RyR1-p.R163C mutation in ryanodine receptors type 1 (RyR1) deregulates Ca²⁺ signaling and mitochondrial function in skeletal muscle and causes malignant hyperthermia in humans and mice under triggering conditions. We investigated whether T lymphocytes from heterozygous RyR1-p.R163C knock-in mutant mice (HET T cells) display measurable aberrations in resting cytosolic Ca²⁺ concentration ([Ca²⁺]_i), Ca²⁺ release from the store, store-operated Ca²⁺ entry (SOCE), and mitochondrial inner membrane potential (ΔΨ_m) compared with T lymphocytes from wild-type mice (WT T cells). We explored whether these variables can be used to distinguish between T cells with normal and altered RyR1 genotype. HET and WT T cells were isolated from spleen and lymph nodes and activated in vitro using phytohemagglutinin P. [Ca²⁺]_i and ΔΨ_m dynamics were examined using Fura 2 and tetramethylrhodamine methyl ester fluorescent dyes, respectively. Activated HET T cells displayed elevated resting [Ca²⁺]_i, diminished responses to Ca²⁺ mobilization with thapsigargin, and decreased rate of [Ca²⁺]_i elevation in response to SOCE compared with WT T cells. Pretreatment of HET T cells with ryanodine or dantrolene sodium reduced disparities in the resting [Ca²⁺]_i and ability of thapsigargin to mobilize Ca²⁺ between HET and WT T cells. While SOCE elicited dissipation of the ΔΨ_m in WT T cells, it produced ΔΨ_m hyperpolarization in HET T cells. When used as the classification variable, the amplitude of thapsigargin-induced Ca²⁺ transient showed the best promise in predicting the presence of RyR1-p.R163C mutation. Other significant variables identified by machine learning analysis were the ratio of resting cytosolic Ca²⁺ level to the amplitude of thapsigargin-induced Ca²⁺ transient and an integral of changes in ΔΨ_m in response to SOCE. Our study demonstrated that gain-of-function mutation in RyR1 significantly affects Ca²⁺ signaling and mitochondrial fiction in T lymphocytes, which suggests that this mutation may cause altered immune responses in its carrier. Our data link the RyR1-p.R163C mutation, which causes inherited skeletal muscle diseases, to deregulation of Ca²⁺ signaling and mitochondrial function in immune T cells and establish proof-of-principle for in vitro T cell-based diagnostic assay for hereditary RyR1 hyperfunction.

Aragonite-Polylysine: Neuro-Regenerative Scaffolds with Diverse Effects on Astrogliosis

Biomaterials, especially when coated with adhesive polymers, are a key tool for restorative medicine, being biocompatible and supportive for cell adherence, growth, and function. Aragonite skeletons of corals are biomaterials that support survival and growth of a range of cell types, including neurons and glia. However, it is not known if this scaffold affects neural cell migration or elongation of neuronal and astrocytic processes, prerequisites for initiating repair of damage in the nervous system. To address this, hippocampal cells were aggregated into neurospheres and cultivated on aragonite skeleton of the coral Trachyphyllia geoffroyi (Coral Skeleton (CS)), on naturally occurring aragonite (Geological Aragonite (GA)), and on glass, all pre-coated with the oligomer poly-D-lysine (PDL). The two aragonite matrices promoted equally strong cell migration (4.8 and 4.3-fold above glass-PDL, respectively) and axonal sprouting (1.96 and 1.95-fold above glass-PDL, respectively). However, CS-PDL had a stronger effect than GA-PDL on the promotion of astrocytic processes elongation (1.7 vs. 1.2-fold above glass-PDL, respectively) and expression of the glial fibrillary acidic protein (3.8 vs. and 1.8-fold above glass-PDL, respectively). These differences are likely to emerge from a reaction of astrocytes to the degree of roughness of the surface of the scaffold, which is higher on CS than on GA. Hence, CS-PDL and GA-PDL are scaffolds of strong capacity to derive neural cell movements and growth required for regeneration, while controlling the extent of astrocytic involvement. As such, implants of PDL-aragonites have significant potential as tools for damage repair and the reduction of scar formation in the brain following trauma or disease.

Viscoelasticity and Volume of Cortical Neurons under Glutamate Excitotoxicity and Osmotic Challenges

Neural activity depends on the maintenance of ionic and osmotic homeostasis. Under these conditions, the cell volume must be regulated to maintain optimal neural function. A disturbance in the neuronal volume regulation often occurs in pathological conditions such as glutamate excitotoxicity. The cell volume, mechanical properties, and actin cytoskeleton structure are tightly connected to achieve the cell homeostasis. Here, we studied the effects of glutamate-induced excitotoxicity, external osmotic pressure, and inhibition of actin polymerization on the viscoelastic properties and volume of neurons. Atomic force microscopy was used to map the viscoelastic properties of neurons in time-series experiments to observe the dynamical changes and a possible recovery. The data obtained on cultured rat cortical neurons were compared with the data obtained on rat fibroblasts. The neurons were found to be more responsive to the osmotic challenges but less sensitive to the inhibition of actin polymerization than fibroblasts. The alterations of the viscoelastic properties caused by glutamate excitotoxicity were similar to those induced by the hypoosmotic stress, but, in contrast to the latter, they did not recover after the glutamate removal. These data were consistent with the dynamic volume changes estimated using ratiometric fluorescent dyes. The recovery after the glutamate-induced excitotoxicity was slow or absent because of a steady increase in intracellular calcium and sodium concentrations. The viscoelastic parameters and their changes were related to such parameters as the actin cortex stiffness, tension, and cytoplasmic viscosity.

Bactericidal surfaces prepared by femtosecond laser patterning and layer-by-layer polyelectrolyte coating

Antimicrobial surfaces are important in medical, clinical, and industrial applications, where bacterial infection and biofouling may constitute a serious threat to human health. Conventional approaches against bacteria involve coating the surface with antibiotics, cytotoxic polymers, or metal particles. However, these types of functionalization have a limited lifetime and pose concerns in terms of leaching and degradation of the coating. Thus, there is a great interest in developing long-lasting and non-leaching bactericidal surfaces. To obtain a bactericidal surface, we combine micro and nanoscale patterning of borosilicate glass surfaces by ultrashort pulsed laser irradiation and a non-leaching layer-by-layer polyelectrolyte modification of the surface. The combination of surface structure and surface charge results in an enhanced bactericidal effect against both Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli bacteria. The laser patterning and the layer-by-layer modification are environmentally friendly processes that are applicable to a wide variety of materials, which makes this method uniquely suited for fundamental studies of bacteria-surface interactions and paves the way for its applications in a variety of fields, such as in hygiene products and medical devices.

Anti-Pathogenic Functions of Non-Digestible Oligosaccharides In Vitro

Non-digestible oligosaccharides (NDOs), complex carbohydrates that resist hydrolysis by salivary and intestinal digestive enzymes, fulfill a diversity of important biological roles. A lot of NDOs are known for their prebiotic properties by stimulating beneficial bacteria in the intestinal microbiota. Human milk oligosaccharides (HMOs) represent the first prebiotics that humans encounter in life. Inspired by these HMO structures, chemically-produced NDO structures (e.g., galacto-oligosaccharides and chito-oligosaccharides) have been recognized as valuable food additives and exert promising health effects. Besides their apparent ability to stimulate beneficial microbial species, oligosaccharides have shown to be important inhibitors of the development of pathogenic infections. Depending on the type and structural characteristics, oligosaccharides can exert a number of anti-pathogenic effects. The most described effect is their ability to act as a decoy receptor, thereby inhibiting adhesion of pathogens. Other ways of pathogenic inhibition, such as interference with pathogenic cell membrane and biofilm integrity and DNA transcription, are less investigated, but could be equally impactful. In this review, a comprehensive overview of In vitro anti-pathogenic properties of different NDOs and associated pathways are discussed. A framework is created categorizing all anti-pathogenic effects and providing insight into structural necessities for an oligosaccharide to exert one of these effects.

Interspecies interactions can enhance Pseudomonas aeruginosa tolerance to surfaces functionalized with silver nanoparticles

Development of anti-fouling surfaces is a major challenge in materials research. Microorganisms growing as biofilms have enhanced tolerance to antimicrobial strategies including antibiotics and antiseptics complicating the design of anti-fouling surfaces. Silver nanoparticles (AgNPs) are a promising antimicrobial technology with broad spectrum efficacy with a reduced likelihood of microorganisms developing resistance to the technology. This study tested the efficacy of new immobilized AgNP-modified surface technology against three common opportunistic pathogens grown either as monocultures or as cocultures. The presented study fills a gap in the literature by quantifying the efficacy of immobilized AgNP particles against multispecies biofilms. Polyethylene (PE) surfaces functionalized with the AgNPs were highly effective against Pseudomonas aeruginosa biofilms reducing viable cell counts by 99.8 % as compared to controls. However, the efficacy of the AgNP-modified PE surface was compromised when P. aeruginosa was cocultured with Candida albicans. Interspecies interactions can strongly influence the efficacy of anti-fouling AgNP coatings highlighting the need to test surfaces not only against biofilm phenotypes but under conditions representative of applications including the presence of multispecies consortia.

Sustained delivery of growth factors with high loading efficiency in a layer by layer assembly

Layer by layer (LBL) assembly has garnered considerable interest due to its ability to generate multifunctional films with high tunability and versatility in terms of substrates and polyelectrolytes, allowing the option to use complex devices and drugs. Polyelectrolytes, such as growth factors (GFs), are essential, but costly, delicate, biological molecules that have been used in various tissue regeneration applications. For this reason, the controlled drug delivery of efficiently loaded GFs via LBL assembly (GF-LBL) can contribute to the establishment of cost-effective biologically triggered biomedical applications. We have developed an LBL method to load GFs (specifically, transforming growth factor beta 1, platelet-derived growth factor ββ, and insulin growth factor 1), with up to 90% efficiency approximately, by gas plasma surface activation and tuning the pH to increase the ionic strength of polyelectrolytes. Poly(styrenesulfonate) (PSS) and poly(ethyleneimine) (PEI) have been used to provide the initial necessary charge for multilayer build-up. Heparin and dextran sulphate have been investigated as counter polyelectrolytes to enhance the activity of GFs by protecting their ligands, where heparin resulted in the highest achievable loading efficiency for all GFs. Oxygen gas plasma and acidic pH levels also resulted in a significant increase in GF loading efficiency. The three GFs were released by diffusion and erosion in a controlled manner over lengthy time scales and the bioactivity was maintained for up to 14 days. When tested as implants in vitro, GF-LBL constructs increased fibroblast proliferation, influenced cell morphology and migration, and enhanced myofibroblast differentiation, indicating that the biological functionalities of the GFs were preserved. In conclusion, this developed LBL assembly method can provide a simple drug delivery system, which may yield more effective applications for tissue regeneration as well as biomedical sciences at large.

Polyethylenimine based magnetic nanoparticles mediated non-viral CRISPR/Cas9 system for genome editing

Clustered regularly interspaced short palindromic repeats-associated protein (CRISPR/Cas9) system has become a revolutionary tool for gene editing. Since viral delivery systems have significant side effects, and naked DNA delivery is not an option, the nontoxic, non-viral delivery of CRISPR/Cas9 components would significantly improve future therapeutic delivery. In this study, we aim at characterizing nanoparticles to deliver plasmid DNA encoding for the CRISPR-Cas system in eukaryotic cells in vitro. CRISPR/Cas9 complexed polyethylenimine (PEI) magnetic nanoparticles (MNPs) were generated. We used a stable HEK293 cell line expressing the traffic light reporter (TLR-3) system to evaluate efficient homology- directed repair (HDR) and non-homologous end joining (NHEJ) events following transfection with NPs. MNPs have been synthesized by co-precipitation with the average particle size around 20 nm in diameter. The dynamic light scattering and zeta potential measurements showed that NPs exhibited narrow size distribution and sufficient colloidal stability. Genome editing events were as efficient as compared to standard lipofectamine transfection. Our approach tested non-viral delivery of CRISPR/Cas9 and DNA template to perform HDR and NHEJ in the same assay. We demonstrated that PEI-MNPs is a promising delivery system for plasmids encoding CRISPR/Cas9 and template DNA and thus can improve safety and utility of gene editing.

In Vitro Corrosion Behavior of Biodegradable Iron Foams with Polymeric Coating

Research in the field of biodegradable metallic scaffolds has advanced during the last decades. Resorbable implants based on iron have become an attractive alternative to the temporary devices made of inert metals. Overcoming an insufficient corrosion rate of pure iron, though, still remains a problem. In our work, we have prepared iron foams and coated them with three different concentrations of polyethyleneimine (PEI) to increase their corrosion rates. Scanning electron microscopy (SEM) coupled with energy dispersive X-ray analysis (EDX), Fourier-transform infrared spectroscopy (FT-IR), and Raman spectroscopy were used for characterization of the polymer coating. The corrosion behavior of the powder-metallurgically prepared samples was evaluated electrochemically using an anodic polarization method. A 12 weeks long in vitro degradation study in Hanks’ solution at 37 °C was also performed. Surface morphology, corrosion behavior, and degradation rates of the open-cell foams were studied and discussed. The use of PEI coating led to an increase in the corrosion rates of the cellular material. The sample with the highest concentration of PEI film showed the most rapid corrosion in the environment of simulated body fluids.

Electrospun gelatin-polyethylenimine blend nanofibrous scaffold for biomedical applications

In this study, gelatin-polyethylenimine blend nanofibers (GEL/PEI) were fabricated via electrospinning with different ratios (9:1, 6:1, 3:1) to integrate the properties of both the polymers for evaluating its biomedical application. From scanning electron microscopy, the average diameter of blend nanofibers (265 ± 0.074 nm to 340 ± 0.088 nm) was observed to be less than GEL nanofibers (403 ± 0.08 nm). The incorporation of PEI with gelatin resulted in improved thermal stability of nanofibers whereas the Young's modulus was observed to be higher at 9:1 ratio when compared with other ratios. The in vitro studies showed that the GEL/PEI nanofibers with 9:1 ratio promoted better cell adhesion and viability. GEL/PEI nanofibers with 9:1 and 6:1 showed hemolysis within the permissible limits. From the results, it could be interpreted that GEL/PEI nanofibers with 9:1 ratio proved to be a better scaffold thereby making them a potential candidate for tissue engineering applications.

High-Content Imaging for Large-Scale Detection of Low-Affinity Extracellular Protein Interactions

Extracellular protein interactions coordinate cellular responses with their local environment and have important roles in pathogen invasion and disease. Due to technical challenges associated with studying binding events at the cell surface, the systematic and reliable identification of novel ligand–receptor pairs remains difficult. Here, we describe the development of a cell-based assay using large-scale transient transfections and high-content imaging (HCI) to detect extracellular binding events. We optimized the parameters for efficient transfection of human cells with cDNA plasmids encoding full-length cell surface receptors in 384-well plates. Using a range of well-characterized structurally diverse low-affinity cell surface interactions, we show that transfected cells probed with highly avid ligands can be used to successfully identify ligand–receptor pairs using an HCI platform and automated image analysis software. To establish the high-throughput potential of this approach, we also screened a pool of ligands against a collection of 2455 cell surface expression clones and found that known ligand–receptor interactions could be robustly and consistently detected across the library using this technology.

Liver slice culture as a model for lipid metabolism in fish

Hepatic lipid metabolism is traditionally investigated in vitro using hepatocyte monocultures lacking the complex three-dimensional structure and interacting cell types essential liver function. Precision cut liver slice (PCLS) culture represents an alternative in vitro system, which benefits from retention of tissue architecture. Here, we present the first comprehensive evaluation of the PCLS method in fish (Atlantic salmon, Salmo salar L.) and validate it in the context of lipid metabolism using feeding trials, extensive transcriptomic data, and fatty acid measurements. We observe an initial period of post-slicing global transcriptome adjustment, which plateaued after 3 days in major metabolic pathways and stabilized through 9 days. PCLS fed alpha-linolenic acid (ALA) and insulin responded in a liver-like manner, increasing lipid biosynthesis gene expression. We identify interactions between insulin and ALA, where two PUFA biosynthesis genes that were induced by insulin or ALA alone, were highly down-regulated when insulin and ALA were combined. We also find that transcriptomic profiles of liver slices are exceedingly more similar to whole liver than hepatocyte monocultures, both for lipid metabolism and liver marker genes. PCLS culture opens new avenues for high throughput experimentation on the effect of “novel feed composition” and represent a promising new strategy for studying genotype-specific molecular features of metabolism.

Mapping insoluble indole metabolites in the gastrointestinal environment of a murine colorectal cancer model using desorption/ionisation on porous silicon imaging

Indole derivatives are a structurally diverse group of compounds found in food, toxins, medicines, and produced by commensal microbiota. On contact with acidic stomach conditions, indoles undergo condensation to generate metabolites that vary in solubility, activity and toxicity as they move through the gut. Here, using halogenated ions, we map promising chemo-preventative indoles, i) 6-bromoisatin (6Br), ii) the mixed indole natural extract (NE) 6Br is found in, and iii) the highly insoluble metabolites formed in vivo using desorption/ionisation on porous silicon-mass spectrometry imaging (DIOS-MSI). The functionalised porous silicon architecture allowed insoluble metabolites to be detected that would otherwise evade most analytical platforms, providing direct evidence for identifying the therapeutic component, 6Br, from the mixed indole NE. As a therapeutic lead, 0.025 mg/g 6Br acts as a chemo-preventative compound in a 12 week genotoxic mouse model; at this dose 6Br significantly reduces epithelial cell proliferation, tumour precursors (aberrant crypt foci; ACF); and tumour numbers while having minimal effects on liver, blood biochemistry and weight parameters compared to controls. The same could not be said for the NE where 6Br originates, which significantly increased liver damage markers. DIOS-MSI revealed a large range of previously unknown insoluble metabolites that could contribute to reduced efficacy and increased toxicity.

Electrospray for generation of drug delivery and vaccine particles applied in vitro and in vivo

Also known as electrospray, electrohydrodynamic atomization has been used extensively in the last 15 years to develop polymer-based particles for drug delivery in cell and animal models. More recently, novel core-shell, multi-axial, and other electrospray particles have been developed from an array of polymers for a variety of biomedical applications. This review focuses on electrospray as a novel method of particle fabrication for drug delivery, specifically highlighting the applications of these particle systems in cell culture and animal models while also discussing polymers used for particle fabrication. Applications of electrospray particles to treat glioma, ovarian cancer, and breast cancer are reviewed. Additionally, delivery of antibiotics, gene therapy, and bacterial cells formulated in electrospray particles is discussed. Finally, vaccines as well as drug eluting particles for differentiation of stem cells and tissue engineering are highlighted. The article concludes with a discussion of where the future of electrospray technology can go to strengthen its foothold in the biomedical field.

Progranulin deficiency leads to reduced glucocerebrosidase activity

Mutation in the GRN gene, encoding the progranulin (PGRN) protein, shows a dose-dependent disease correlation, wherein haploinsufficiency results in frontotemporal lobar degeneration (FTLD) and complete loss results in neuronal ceroid lipofuscinosis (NCL). Although the exact function of PGRN is unknown, it has been increasingly implicated in lysosomal physiology. Here we report that PGRN interacts with the lysosomal enzyme, glucocerebrosidase (GCase), and is essential for proper GCase activity. GCase activity is significantly reduced in tissue lysates from PGRN-deficient mice. This is further evidence that reduced lysosomal hydrolase activity may be a pathological mechanism in cases of GRN-related FTLD and NCL.