Production of recombinant proteins in E. coli by the heat inducible expression system based on the phage lambda pL and/or pR promoters

Inducible transposon mutagenesis for genome-scale forward genetics

Transposon insertion sequencing (Tn-seq) is a powerful method for genome-scale functional genetics in bacteria. However, its effectiveness is often limited by a lack of mutant diversity, caused by either inefficient transposon delivery or stochastic loss of mutants due to population bottlenecks. Here, we introduce "InducTn-seq", which leverages inducible mutagenesis for temporal control of transposition. InducTn-seq generates millions of transposon mutants from a single colony, enabling the sensitive detection of subtle fitness defects and transforming binary classifications of gene essentiality into a quantitative fitness measurement across both essential and non-essential genes. Using a mouse model of infectious colitis, we show that InducTn-seq bypasses a highly restrictive host bottleneck to generate a diverse transposon mutant population from the few cells that initiate infection, revealing the role of oxygen-related metabolic plasticity in pathogenesis. Overall, InducTn-seq overcomes the limitations of traditional Tn-seq, unlocking new possibilities for genome-scale forward genetic screens in bacteria.

A comprehensive study of glucose and oxygen gradients in a scaled-down model of recombinant HuGM-CSF production in thermoinduced Escherichia coli fed-batch cultures

The effect of gradients of elevated glucose and low dissolved oxygen in the addition zone of fed-batch E. coli thermoinduced recombinant high cell density cultures can be evaluated through two-compartment scale-down models. Here, glucose was fed in the inlet of a plug flow bioreactor (PFB) connected to a stirred tank bioreactor (STB). E. coli cells diminished growth from 48.2 ± 2.2 g/L in the stage of RP production if compared to control (STB) with STB-PFB experiments, when residence time inside the PFB was 25 s (34.1 ± 3.5 g/L) and 40 s (25.6 ± 5.1 g/L), respectively. The recombinant granulocyte-macrophage colony-stimulating factor (rHuGM-CSF) production decreased from 34 ± 7% of RP in inclusion bodies (IB) in control cultures to 21 ± 8%, and 7 ± 4% during the thermoinduction production phase when increasing residence time inside the PFB to 25 s and 40 s, respectively. This, along with the accumulation of acetic and formic acid (up to 4 g/L), indicates metabolic redirection of central carbon routes through metabolic flow and mixed acid fermentation. Special care must be taken when producing a recombinant protein in heat-induced E. coli, because the yield and productivity of the protein decreases as the size of the bioreactors increases, especially if they are carried at high cell density.

From Natural Microbe Screening to Sustained Chitinase Activity in Exogenous Hosts

Genetic parts and hosts can be sourced from nature to realize new functions for synthetic biology or to improve performance in a particular application environment. Here, we proceed from the discovery and characterization of new parts to stable expression in new hosts with a particular focus on achieving sustained chitinase activity. Chitinase is a key enzyme for various industrial applications that require the breakdown of chitin, the second most abundant biopolymer on the earth. Diverse microbes exhibit chitinase activity, but for applications, the environmental conditions for optimal enzyme activity and microbe fitness must align with the application context. Achieving sustained chitinase activity under broad conditions in heterologous hosts has also proven difficult due to toxic side effects. Toward addressing these challenges, we first screen ocean water samples to identify microbes with chitinase activity. Next, we perform whole genome sequencing and analysis and select a chitinase gene for heterologous expression. Then, we optimize transformation methods for target hosts and introduce chitinase. Finally, to achieve robust function, we optimize ribosome binding sites and discover a beneficial promoter that upregulates chitinase expression in the presence of colloidal chitin in a sense-and-respond fashion. We demonstrate chitinase activity for >21 days in standard (Escherichia coli) and nonstandard (Roseobacter denitrificans) hosts. Besides enhancing chitinase applications, our pipeline is extendable to other functions, identifies natural microbes that can be used directly in non-GMO contexts, generates new parts for synthetic biology, and achieves weeks of stable activity in heterologous hosts.

A heat-inducible expression system for external control of gene expression in plastids

Inducible expression systems can overcome the trade-off between high-level transgene expression and its pleiotropic effects on plant growth. In addition, they can facilitate the expression of biochemical pathways that produce toxic metabolites. Although a few inducible expression systems for the control of transgene expression in plastids have been developed, they all depend on chemical inducers and/or nuclear transgenes. Here we report a temperature-inducible expression system for plastids that is based on the bacteriophage λ leftward and rightward promoters (pL/pR) and the temperature-sensitive repressor cI857. We show that the expression of green fluorescent protein (GFP) in plastids can be efficiently repressed by cI857 under normal growth conditions, and becomes induced over time upon exposure to elevated temperatures in a light-dependent process. We further demonstrate that by introducing into plastids an expression system based on the bacteriophage T7 RNA polymerase, the temperature-dependent accumulation of GFP increased further and was ~24 times higher than expression driven by the pL/pR promoter alone, reaching ~0.48% of the total soluble protein. In conclusion, our heat-inducible expression system provides a new tool for the external control of plastid (trans) gene expression that is cost-effective and does not depend on chemical inducers.

Thermophilic β-mannanases from bacteria: production, resources, structural features and bioengineering strategies

β-mannanases are pivotal enzymes that cleave the mannan backbone to release short chain mannooligosaccharides, which have tremendous biotechnological applications including food/feed, prebiotics and biofuel production. Due to the high temperature conditions in many industrial applications, thermophilic mannanases seem to have great potential to overcome the thermal impediments. Thus, structural analysis of thermostable β-mannanases is extremely important, as it could open up new avenues for genetic engineering, and protein engineering of these enzymes with enhanced properties and catalytic efficiencies. Under this scope, the present review provides a state-of-the-art discussion on the thermophilic β-mannanases from bacterial origin, their production, engineering and structural characterization. It covers broad insights into various molecular biology techniques such as gene mutagenesis, heterologous gene expression, and protein engineering, that are employed to improve the catalytic efficiency and thermostability of bacterial mannanases for potential industrial applications. Further, the bottlenecks associated with mannanase production and process optimization are also discussed. Finally, future research related to bioengineering of mannanases with novel protein expression systems for commercial applications are also elaborated.

Ultrahigh-throughput screening-assisted in vivo directed evolution for enzyme engineering

BACKGROUND

Classical directed evolution is a powerful approach for engineering biomolecules with improved or novel functions. However, it traditionally relies on labour- and time-intensive iterative cycles, due in part to the need for multiple molecular biology steps, including DNA transformation, and limited screening throughput.

RESULTS

In this study, we present an ultrahigh throughput in vivo continuous directed evolution system with thermosensitive inducible tunability, which is based on error-prone DNA polymerase expression modulated by engineered thermal-responsive repressor cI857, and genomic MutS mutant with temperature-sensitive defect for fixation of mutations in Escherichia coli. We demonstrated the success of the in vivo evolution platform with β-lactamase as a model, with an approximately 600-fold increase in the targeted mutation rate. Furthermore, the platform was combined with ultrahigh-throughput screening methods and employed to evolve α-amylase and the resveratrol biosynthetic pathway. After iterative rounds of enrichment, a mutant with a 48.3% improvement in α-amylase activity was identified via microfluidic droplet screening. In addition, when coupled with an in vivo biosensor in the resveratrol biosynthetic pathway, a variant with 1.7-fold higher resveratrol production was selected by fluorescence-activated cell sorting.

CONCLUSIONS

In this study, thermal-responsive targeted mutagenesis coupled with ultrahigh-throughput screening was developed for the rapid evolution of enzymes and biosynthetic pathways.

Structural and functional characterization of MrpR, the master repressor of the Bacillus subtilis prophage SPβ

Prophages control their lifestyle to either be maintained within the host genome or enter the lytic cycle. Bacillus subtilis contains the SPβ prophage whose lysogenic state depends on the MrpR (YopR) protein, a key component of the lysis-lysogeny decision system. Using a historic B. subtilis strain harboring the heat-sensitive SPβ c2 mutant, we demonstrate that the lytic cycle of SPβ c2 can be induced by heat due to a single nucleotide exchange in the mrpR gene, rendering the encoded MrpRG136E protein temperature-sensitive. Structural characterization revealed that MrpR is a DNA-binding protein resembling the overall fold of tyrosine recombinases. MrpR has lost its recombinase function and the G136E exchange impairs its higher-order structure and DNA binding activity. Genome-wide profiling of MrpR binding revealed its association with the previously identified SPbeta repeated element (SPBRE) in the SPβ genome. MrpR functions as a master repressor of SPβ that binds to this conserved element to maintain lysogeny. The heat-inducible excision of the SPβ c2 mutant remains reliant on the serine recombinase SprA. A suppressor mutant analysis identified a previously unknown component of the lysis-lysogeny management system that is crucial for the induction of the lytic cycle of SPβ.

A DNA phosphorothioation-based Dnd defense system provides resistance against various phages and is compatible with the Ssp defense system

DndABCDE-catalyzed DNA phosphorothioation (PT), in which the nonbridging oxygen is swapped with a sulfur atom, was first identified in the bacterial genome. Usually, this modification gene cluster is paired with a restriction module consisting of DndF, DndG, and DndH. Although the mechanisms for the antiphage activity conferred by this Dnd-related restriction and modification (R-M) system have been well characterized, several features remain unclear, including the antiphage spectrum and potential interference with DNA methylation. Recently, a novel PT-related R-M system, composed of the modification module SspABCD paired with a single restriction enzyme, SspE, was revealed to be widespread in the bacterial kingdom, which aroused our interest in the interaction between Dnd- and Ssp-based R-M systems. In this study, we discussed the action of Dnd-related R-M systems against phages and demonstrated that the host could benefit from the protection provided by Dnd-related R-M systems against infection by various lytic phages as well as temperate phages. However, this defense barrier would fail against lysogenic phages. Interestingly, DNA methylation, even in the consensus sequence recognized by the Dnd system, could not weaken the restriction efficiency. Finally, we explored the interaction between Dnd- and Ssp-based R-M systems and found that these two systems were compatible. This study not only expands our knowledge of Dnd-associated R-M systems but also reveals a complex interaction between different defense barriers that coexist in the cell. IMPORTANCE Recently, we decoded the mechanism of Dnd-related R-M systems against genetic parasites. In the presence of exogenous DNA that lacks PT, the macromolecular machine consisting of DndF, DndG, and DndH undergoes conformational changes to perform DNA binding, translocation, and DNA nicking activities and scavenge the foreign DNA. However, several questions remain unanswered, including questions regarding the antiphage spectrum, potential interference by DNA methylation, and interplay with other PT-dependent R-M systems. Here, we revealed that the host could benefit from Dnd-related R-M systems for a broad range of antiphage activities, regardless of the presence of DNA methylation. Furthermore, we demonstrated that the convergence of Dnd- and Ssp-related R-M systems could confer to the host a stronger antiphage ability through the additive suppression of phage replication. This study not only deepens our understanding of PT-related defense barriers but also expands our knowledge of the arms race between bacteria and their predators.

A Multi-Layer-Controlled Strategy for Cloning and Expression of Toxin Genes in Escherichia coli

Molecular cloning and controlled expression remain challenging when the target gene encodes a protein that is toxic to the host. We developed a set of multi-layer control systems to enable cloning of genes encoding proteins known to be highly toxic in Escherichia coli and other bacteria. The different multi-layer control systems combine a promoter-operator system on a transcriptional level with a riboswitch for translational control. Additionally, replicational control is ensured by using a strain that reduces the plasmid copy number. The use of weaker promoters (such as PBAD or PfdeA) in combination with the effective theophylline riboswitch is essential for cloning genes that encode notoriously toxic proteins that directly target translation and transcription. Controlled overexpression is possible, allowing the system to be used for evaluating in vivo effects of the toxin. Systems with a stronger promoter can be used for successful overexpression and purification of the desired protein but are limited to toxins that are more moderate and do not interfere with their own production.

Thermoinducible E. coli for Recombinant Protein Production in Inclusion Bodies

The temperature-inducible λpL/pR-cI857 expression system has been widely used to produce recombinant proteins (RPs), especially when it is necessary to avoid the addition of exogenous materials to induce the expression of recombinant genes, preventing contamination of bioprocesses. The temperature increase favors the formation of inclusion bodies (IBs). The temperature upshift could change the metabolism, productivities, cell viability, IBs architecture, and the host cell proteins inside IBs, affecting downstream to obtain the final product. In this contribution, we focus on the relationship between the bioprocesses using temperature increase as inducer, the heat shock response associated with temperature up-shift, the RP accumulation, and the formation of IBs. Here, we describe how to produce IBs and how culture conditions can modulate the composition and architecture of IBs by modifying the induction temperature in RP production.

New vectors for urea-inducible recombinant protein production

We have developed a novel urea-inducible recombinant protein production system by exploiting the Proteus mirabilis urease ureR-ureD promoter region and the ureR AraC-family transcriptional regulator. Experiments using the expression of β-galactosidase and green fluorescent protein (GFP) showed that promoter activity is tightly regulated and that varying the concentration of urea can give up to 100-fold induction. Production of proteins of biopharmaceutical interest has been demonstrated, including human growth hormone (hGH), a single chain antibody fragment (scFv) against interleukin-1β and a potential Neisserial vaccine candidate (BamA_ENm). Expression levels can be fine-tuned by temperature and different urea concentrations, and can be induced with readily available garden fertilisers and even urine. As urea is an inexpensive, stable inducer, a urea-induced expression system has the potential to considerably reduce the costs of large-scale recombinant protein production.

Control of λ Lysogenic Escherichia coli Cells by Synthetic λ Phage Carrying cIantisense

Enterobacterial phage λ is a temperate phage that infects Escherichia coli and has a lytic-lysogenic life cycle. CI, a λ repressor, regulates the expression of lytic transcripts and acts as a major genetic switch that determines the lysogenic state. To manipulate the genome of phage λ, the CRISPR-Cas9 genome editing system was constructed in lysogenic E. coli MG1655 cells. For instance, we successfully changed cI857 to cIWT in the phage genome through Cas9-mediated single-nucleotide editing. A lytic phage was prepared by introducing an amber mutation in the middle of the cI gene, but it could not lyse lysogenic MG1655 cells. We prepared a phage expressing cI antisense mRNA by reverse substitution of the cI gene. Lysis of λ cI857 lysogenic cells occurred by the infection of the λ cIantisense. These results suggest an effective lysogenic cell control method by a synthetic phage expressing antisense mRNA of the genetic switch gene. It is expected to be applied as a tool to control harmful lysogenic microorganisms.

Cybergenetic control of microbial community composition

The use of bacterial communities in bioproduction instead of monocultures has potential advantages including increased productivity through division of labour, ability to utilise cheaper substrates, and robustness against perturbations. A key challenge in the application of engineered bacterial communities is the ability to reliably control the composition of the community in terms of its constituent species. This is crucial to prevent faster growing species from outcompeting others with a lower relative fitness, and to ensure that all species are present at an optimal ratio during different steps in a biotechnological process. In contrast to purely biological approaches such as synthetic quorum sensing circuits or paired auxotrophies, cybergenetic control techniques - those in which computers interface with living cells-are emerging as an alternative approach with many advantages. The community composition is measured through methods such as fluorescence intensity or flow cytometry, with measured data fed real-time into a computer. A control action is computed using a variety of possible control algorithms and then applied to the system, with actuation taking the form of chemical (e.g., inducers, nutrients) or physical (e.g., optogenetic, mechanical) inputs. Subsequent changes in composition are then measured and the cycle repeated, maintaining or driving the system to a desired state. This review discusses recent and future developments in methods for implementing cybergenetic control systems, contrasts their capabilities with those of traditional biological methods of population control, and discusses future directions and outstanding challenges for the field.

Enhanced Acetate Tolerance and Recombinant Protein Accumulation in Escherichia coli by Transgenic Expression of a Heat Shock Protein from Carrot (Daucus carota L.)

BACKGROUND

In Escherichia coli (E. coli) culture, acetate accumulates as an undesirable by-product of aerobic fermentation on glucose and inhibits cell growth and recombinant protein production.

OBJECTIVES

We examined whether the heterologous expression of a eukaryotic heat shock protein (Hsp) can confer tolerance to acetate in E. coli.

MATERIALS AND METHODS

Transgenic cell lines (TCLs) heterologously expressing a small heat shock protein (sHsp) from carrot (Daucus carota L.), DcHsp17.7, were exposed to heat, sodium acetate, and alkaline conditions. The cell growth and cell viability were examined by measuring O.D.₆₀₀ and colony-forming units (CFU), respectively. The His-tagged recombinant alcohol dehydrogenase (ADH) gene cloned in a pET11a expression vector was introduced into TCL1 and expressed by isopropyl β-D-1-thiogalactopyranoside treatment. After purifying using Ni-NTA affinity chromatography, its accumulation levels were examined using SDS-PAGE in the presence of acetate.

RESULTS

TCLs constitutively expressing DcHsp17.7 showed improved growth, cell density, and cell viability under the stress conditions of heat, acetate, and alkaline compared to an empty vector control line. In acetate stress conditions, TCL1 accumulated more cellular proteins (approximately 130%) than the control. The recombinant ADH accumulated to a higher level in TCL1 (2.2-fold at 16 °C) than the control. The addition of acetate reduced the recombinant ADH level by 70% in the control when compared with the absence of acetate. In contrast, recombinant ADH accumulation was not affected by acetate in TCL1. In the presence of acetate, TCL1 accumulated 6.4-fold more recombinant ADH than did the control. Furthermore, recombinant ADH produced in TCL1 showed 1.5-fold higher enzyme activity than that produced in the control in the presence or absence of acetate.

CONCLUSION

Our study showed that heterologously expressed DcHsp17.7 from carrot can alleviate the negative effects of acetate on E. coli.

Conversion of recombinant human ferritin light chain inclusion bodies into uniform nanoparticles in Escherichia coli for facile production

Prokaryotic expression systems are widely used to produce many types of biologics because of their extreme conveniences and unmatchable cost. However, production of recombinant human ferritin light chain (rhFTL) protein is largely restrained because its expression in Escherichia coli tends to form inclusion bodies (IBs). In this study, a prokaryotic expression vector (FTL-pBV220) harboring the rhFTL gene was constructed using a pBV220 plasmid. The tag-free rhFTL was highly expressed and almost entirely converted to soluble form, and thus the rhFTL was successfully self-assembled into uniform nanoparticles in E. coli. To establish a simplified downstream process, a precipitation procedure based on the optimized incubation temperature, pH condition, and ionic strength was developed to remove impurities from the crude lysate supernatant. The rhFTL retained in the clarified supernatant was subsequently purified in a single step using Capto Butyl column resulting in a considerable recovery and high purity. The purified rhFTL was characterized and verified by mass spectrometry and spectral and morphological analyses. The results revealed that rhFTL exhibited highly ordered and fairly compact structures and the spherical structures were preserved.

Robust network topologies for temperature-inducible bioswitches

BACKGROUND

Thermoinducible bioswitches are unique in that the all-or-none switch response is triggered by temperature, which is a global factor that impacts all biochemical reaction processes. To date, temperature-inducible bioswitches rely exclusively on special thermal sensing biomolecules of DNA, RNA, proteins and lipids whose conformations are critically temperature dependent.

METHOD

This paper extends the traditional thermal switch by utilizing purposely designed network topologies of biomolecular interactions to achieve the switching function. By assuming the general Arrhenius law for biochemical reactions, we explore the full space of all three-node genetic interaction networks to screen topologies capable of thermal bioswitches. Three target bioswitches, i.e., thermal-inducible Off-On, cold-inducible On-Off, and hybrid Off-On-Off double switches, are considered separately.

CONCLUSIONS

We identify the minimal and core network skeletons that are basic and essential for building robust high-performance bioswitches: three Off-On motifs, three On-Off motifs, and an incoherent feedforward motif for an Off-On-Off double switch. Functional topologies are implicitly preferential in choosing parameter values to achieve the target functions. The scenario of the topology-based bioswitch we propose here is an extension of molecule-based bioswitches and would be valuable in aiding the rational design and synthesis of efficient high-performance thermal bioswitches.

Enzymatic hydrolysis of lignocellulosic biomass using a novel, thermotolerant recombinant xylosidase enzyme from Clostridium clariflavum: a potential addition for biofuel industry

The present study describes the cloning, expression, purification and characterization of the xylosidase gene (1650 bp) from a thermophilic bacterium Clostridium clariflavum into E. coli BL21 (DE3) using the expression vector pET-21a(+) for utilization in biofuel production. The recombinant xylosidase enzyme was purified to homogeneity by heat treatment and immobilized metal ion affinity chromatography. SDS-PAGE determined that the molecular weight of purified xylosidase was 60 kDa. This purified recombinant xylosidase showed its maximum activity at a temperature of 37 °C and pH 6.0. The purified recombinant xylosidase enzyme remains stable up to 90 °C for 4 h and retained 54.6% relative activity as compared to the control. The presence of metal ions such as Ca²⁺ and Mg²⁺ showed a positive impact on xylosidase enzyme activity whereas Cu²⁺ and Hg²⁺ inhibit its activity. Organic solvents did not considerably affect the stability of the purified xylosidase enzyme while DMSO and SDS cause the inhibition of enzyme activity. Pretreatment experiments were run in triplicate for 72 h at 30 °C using 10% NaOH. Saccharification experiment was performed by using 1% substrate (pretreated plant biomass) in citrate phosphate buffer of pH 6.5 loaded with 150 U mL⁻¹ of purified recombinant xylosidase enzyme along with ampicillin (10  μg mL⁻¹). Subsequent incubation was carried out at 50 °C and 100 rpm in a shaking incubator for 24 h. Saccharification potential of the recombinant xylosidase enzyme was calculated against both pretreated and untreated sugarcane bagasse and wheat straw as 9.63% and 8.91% respectively. All these characteristics of the recombinant thermotolerant xylosidase enzyme recommended it as a potential candidate for biofuel industry.

The present study describes the cloning, expression, purification and characterization of a xylosidase gene from Clostridium clariflavum into E. coli BL21 (DE3) using the expression vector pET-21a(+) for utilization in biofuel production.

Synthetic biology and bioelectrochemical tools for electrogenetic system engineering

Synthetic biology research and its industrial applications rely on deterministic spatiotemporal control of gene expression. Recently, electrochemical control of gene expression has been demonstrated in electrogenetic systems (redox-responsive promoters used alongside redox inducers and electrodes), allowing for the direct integration of electronics with biological processes. However, the use of electrogenetic systems is limited by poor activity, tunability, and standardization. In this work, we developed a strong, unidirectional, redox-responsive promoter before deriving a mutant promoter library with a spectrum of strengths. We constructed genetic circuits with these parts and demonstrated their activation by multiple classes of redox molecules. Last, we demonstrated electrochemical activation of gene expression under aerobic conditions using a novel, modular bioelectrochemical device. These genetic and electrochemical tools facilitate the design and improve the performance of electrogenetic systems. Furthermore, the genetic design strategies used can be applied to other redox-responsive promoters to further expand the available tools for electrogenetics.

Current status, and the developments of hosts and expression systems for the production of recombinant human cytokines

Cytokines consist of peptides, proteins and glycoproteins, which are biological signaling molecules, and boost cell-cell communication in immune reactions to stimulate cellular movements in the place of trauma, inflammation and infection. Recombinant cytokines are designed in such a way that they have generalized immunostimulation action or stimulate specific immune cells when the body encounters immunosuppressive signals from exogenous pathogens or other tumor microenvironments. Recombinant cytokines have improved the treatment processes for numerous diseases. They are also beneficial against novel toxicities that arise due to pharmacologic immunostimulators that lead to an imbalance in the regulation of cytokine. So, the production and use of recombinant human cytokines as therapeutic proteins are significant for medical treatment purposes. For the improved production of recombinant human cytokines, the development of host cells such as bacteria, yeast, fungi, insect, mammal and transgenic plants, and the specific expression systems for individual hosts is necessary. The recent advancements in the field of genetic engineering are beneficial for easy and efficient genetic manipulations for hosts as well as expression cassettes. The use of metabolic engineering and systems biology approaches have tremendous applications in recombinant protein production by generating mathematical models, and analyzing complex biological networks and metabolic pathways via simulations to understand the interconnections between metabolites and genetic behaviors. Further, the bioprocess developments and the optimization of cell culture conditions would enhance recombinant cytokines productivity on large scales.

Cross-kingdom expression of synthetic genetic elements promotes discovery of metabolites in the human microbiome

Small molecules encoded by biosynthetic pathways mediate cross-species interactions and harbor untapped potential, which has provided valuable compounds for medicine and biotechnology. Since studying biosynthetic gene clusters in their native context is often difficult, alternative efforts rely on heterologous expression, which is limited by host-specific metabolic capacity and regulation. Here, we describe a computational-experimental technology to redesign genes and their regulatory regions with hybrid elements for cross-species expression in Gram-negative and -positive bacteria and eukaryotes, decoupling biosynthetic capacity from host-range constraints to activate silenced pathways. These synthetic genetic elements enabled the discovery of a class of microbiome-derived nucleotide metabolites-tyrocitabines-from Lactobacillus iners. Tyrocitabines feature a remarkable orthoester-phosphate, inhibit translational activity, and invoke unexpected biosynthetic machinery, including a class of "Amadori synthases" and "abortive" tRNA synthetases. Our approach establishes a general strategy for the redesign, expression, mobilization, and characterization of genetic elements in diverse organisms and communities.

A Temperature-Controlled Cell-Free Expression System by Dynamic Repressor

The cell-free protein synthesis (CFPS) system is a typical protein production platform in the field of synthetic biology. However, there are limitations in controlling protein synthesis in the CFPS system. Compared with the traditional method of adding chemicals, temperature is an ideal control switch to achieve precise spatiotemporal control with few side effects. Hence, the design of a temperature-controlled cell-free protein synthesis (tcCFPS) system based on E. coli was carried out with the repressor cI protein in this study. The corresponding tcCFPS achieved a 143-fold dynamic protein expression level at 37 °C than that at 30 °C. Besides, the artificial cell controlled by temperature was constructed to expand the applications of tcCFPS. This study provides a new effective method for active protein synthesis in a cell-free system and a potential means of drug synthesis and delivery.

The pre-induction temperature affects recombinant HuGM-CSF aggregation in thermoinducible Escherichia coli

The overproduction of recombinant proteins in Escherichia coli leads to insoluble aggregates of proteins called inclusion bodies (IBs). IBs are considered dynamic entities that harbor high percentages of the recombinant protein, which can be found in different conformational states. The production conditions influence the properties of IBs and recombinant protein recovery and solubilization. The E. coli growth in thermoinduced systems is generally carried out at 30 °C and then recombinant protein production at 42 °C. Since the heat shock response in E. coli is triggered above 34 °C, the synthesis of heat shock proteins can modify the yields of the recombinant protein and the structural quality of IBs. The objective of this work was to evaluate the effect of different pre-induction temperatures (30 and 34 °C) on the growth of E. coli W3110 producing the human granulocyte-macrophage colony-stimulating factor (rHuGM-CSF) and on the IBs structure in a λpL/pR-cI857 thermoinducible system. The recombinant E. coli cultures growing at 34 °C showed a ~ 69% increase in the specific growth rate compared to cultures grown at 30 °C. The amount of rHuGM-CSF in IBs was significantly higher in cultures grown at 34 °C. Main folding chaperones (DnaK and GroEL) were associated with IBs and their co-chaperones (DnaJ and GroES) with the soluble protein fraction. Finally, IBs from cultures that grew at 34 °C had a lower content of amyloid-like structure and were more sensitive to proteolytic degradation than IBs obtained from cultures at 30 °C. Our study presents evidence that increasing the pre-induction temperature in a thermoinduced system allows obtaining higher recombinant protein and reducing amyloid contents of the IBs. KEY POINTS: • Pre-induction temperature determines inclusion bodies architecture • In pre-induction (above 34 °C), the heat shock response increases recombinant protein production • Inclusion bodies at higher pre-induction temperature show a lower amyloid content.

Ultrasound-controllable engineered bacteria for cancer immunotherapy

Rapid advances in synthetic biology are driving the development of genetically engineered microbes as therapeutic agents for a multitude of human diseases, including cancer. The immunosuppressive microenvironment of solid tumors, in particular, creates a favorable niche for systemically administered bacteria to engraft and release therapeutic payloads. However, such payloads can be harmful if released outside the tumor in healthy tissues where the bacteria also engraft in smaller numbers. To address this limitation, we engineer therapeutic bacteria to be controlled by focused ultrasound, a form of energy that can be applied noninvasively to specific anatomical sites such as solid tumors. This control is provided by a temperature-actuated genetic state switch that produces lasting therapeutic output in response to briefly applied focused ultrasound hyperthermia. Using a combination of rational design and high-throughput screening we optimize the switching circuits of engineered cells and connect their activity to the release of immune checkpoint inhibitors. In a clinically relevant cancer model, ultrasound-activated therapeutic microbes successfully turn on in situ and induce a marked suppression of tumor growth. This technology provides a critical tool for the spatiotemporal targeting of potent bacterial therapeutics in a variety of biological and clinical scenarios.

Precise Thermal Regulation of Engineered Bacteria Secretion for Breast Cancer Treatment In Vivo

For the biomedical application of engineered bacteria, strictly regulating the function of engineered bacteria has always been the goal pursued. However, the existing regulation methods do not meet the needs of the in vivo application of engineered bacteria. Therefore, the exploration of the precise regulation of engineered bacteria is necessary. Herein, heat-sensitive engineered bacteria that can respond to thermal stimuli within 30 min were constructed, and the precise control of functions was verified in the intestines of various model organisms (including C. elegans, bees, and mice). Subsequently, heat-sensitive engineered bacteria were shown to colonize the mouse tumor microenvironment. Finally, thermal stimulation was proven to control engineered bacteria to produce the therapeutic protein tumor necrosis factor α (TNF-α) in the tumor. After three heat stimulation treatments, the growth of the tumor was significantly inhibited, suggesting that heat can be used as a strategy to precisely control engineered bacteria in vivo.

Highly Reversible Tunable Thermal-Repressible Split-T7 RNA Polymerases (Thermal-T7RNAPs) for Dynamic Gene Regulation

Temperature is a physical cue that is easy to apply, allowing cellular behaviors to be controlled in a contactless and dynamic manner via heat-inducible/repressible systems. However, existing heat-repressible systems are limited in number, rely on thermal sensitive mRNA or transcription factors that function at low temperatures, lack tunability, suffer delays, and are overly complex. To provide an alternative mode of thermal regulation, we developed a library of compact, reversible, and tunable thermal-repressible split-T7 RNA polymerase systems (Thermal-T7RNAPs), which fused temperature-sensitive domains of Tlpa protein with split-T7RNAP to enable direct thermal control of the T7RNAP activity between 30 and 42 °C. We generated a large mutant library with varying thermal performances via an automated screening framework to extend temperature tunability. Lastly, using the mutants, novel thermal logic circuitry was implemented to regulate cell growth and achieve active thermal control of the cell proportions within co-cultures. Overall, this technology expanded avenues for thermal control in biotechnology applications.

Thermogenetics: Applications come of age

Temperature is a ubiquitous physical cue that is non-invasive, penetrative and easy to apply. In the growing field of thermogenetics, through beneficial repurposing of natural thermosensing mechanisms, synthetic biology is bringing new opportunities to design and build robust temperature-sensitive (TS) sensors which forms a thermogenetic toolbox of well characterised biological parts. Recent advancements in technological platforms available have expedited the discovery of novel or de novo thermosensors which are increasingly deployed in many practical temperature-dependent biomedical, industrial and biosafety applications. In all, the review aims to convey both the exhilarating recent technological developments underlying the advancement of thermosensors and the exciting opportunities the nascent thermogenetic field holds for biomedical and biotechnology applications.

In Vivo Screening Method for the Identification and Characterization of Prokaryotic, Metabolite-Responsive Transcription Factors

In prokaryotes, transcription factors (TFs) are of uttermost importance for the regulation of gene expression. However, the majority of TFs are not characterized today, which hampers both the understanding of fundamental processes and the development of TF-based applications, such as biosensors, used in metabolic engineering, synthetic biology, diagnostics, etc. One way of analyzing TFs is through in vivo screening, enabling the study of TF-promoter interactions, ligand inducibility, and ligand specificity in a high-throughput fashion. Here, an approach is described for the selection and cloning of TF-promoter pairs, the development of a reporter system, and the measurement and analysis of fluorescent reporter assays. Furthermore, the importance of a suitable inducible plasmid system is illustrated together with prospective adaptations to modify a reporter system's output signal. The given approach can be used for the investigation of native, heterologous, or even artificially created TFs in Escherichia coli, and can be extended toward use in other microorganisms.

Development of a Highly Efficient Copper-Inducible GAL Regulation System (CuIGR) in Saccharomyces cerevisiae

Dynamic regulation of gene expression to decouple growth and production has been proven to be effective for improving the biosynthetic efficiency of microbial cell factories. However, the number of efficient regulatory systems available for regulation of Saccharomyces cerevisiae is limited. In the present study, a novel copper-inducible gene expression system (CuIGR) composed of the copper-induced transcriptional activator Gal4 and the copper-inhibited repressor Gal80 was constructed in S. cerevisiae. When Gal80 was fused with a N-degron tag (K15), the resulting CuIGR4 system exhibited the most stringent regulation of gene expression driven by GAL1/2/7/10 promoters. As compared to the native Cu²⁺-inducible CUP1 promoter, the CuIGR4 system amplified the response to copper by as much as 2.7 folds, resulting in 72-fold induction of EGFP expression and a 33-fold change in lycopene production (3-100 mg/L) with addition of 20 μM copper. This newly developed copper-inducible system provides a powerful tool for gene expression control in S. cerevisiae, which is expected to be widely applicable in the regulation of yeast cell factories for enhanced biosynthesis of valuable products.

A portable library of phosphate-depletion based synthetic promoters for customable and automata control of gene expression in bacteria

Industrial biotechnology gene expression systems relay on constitutive promoters compromising cellular growth from the start of the bioprocess, or on inducible devices, which require manual addition of cognate inducers. To overcome this shortcoming, we engineered an automata regulatory system based on cell-stress mechanisms. Specifically, we engineered a synthetic and highly portable phosphate-depletion library of promoters inspired by bacterial PHO starvation system (Pliar promoters). Furthermore, we fully characterized 10 synthetic promoters within the background of two well-known bacterial workhorses such as E. coli W and P. putida KT2440. The promoters displayed an interesting host-dependent performance and a wide strength spectrum ranging from 0.4- to 1.3-fold when compared to the wild-type phosphatase alkaline promoter (PphoA). By comparing with available gene expression systems, we proved the suitability of this new library for the automata and effective decoupling of growth from production in P. putida. Growth phase-dependent expression of these promoters could therefore be activated by fine tuning the initial concentration of phosphate in the medium. Finally, the Pliar library was implemented in the SEVA platform in a ready-to-use mode allowing its broad use by the scientific community.

Influence of the expression vector and its elements on recombinant human prolactin synthesis in Escherichia coli; co-directional orientation of replication and transcription is highly critical

The aim of the present work was to define a bacterial expression system that is particularly efficient for the synthesis of recombinant human prolactin (hPRL). In previous work, based on experiments that were basically carried out in parallel with the present ones, the synthesis of rec-hPRL by the p1813-hPRL vector in E. coli HB2151 was >500 mg/L, while it was much lower here (2.5-4-fold), in the RB791 and RRI strains. The highest positive influence on rec-hPRL synthesis was due to the transcription-replication co-orientation of hPRL cDNA and the ori/antibiotic resistance gene, responsible for up to a ~ 5-6-fold higher expression yield. In conclusion, this work confirmed that each bacterial strain of E. coli has a genetic background that can allow a different level of heterologous protein synthesis. The individual study of each element indicated that its action critically depends on the reading orientation in which it is located inside the vector: co-directional orientation of replication and transcription, in fact, greatly increased the level of rec-hPRL expression.

Optogenetic strategies for the control of gene expression in yeasts

Optogenetics involves the use of light to control cellular functions and has become increasingly popular in various areas of research, especially in the precise control of gene expression. While this technology is already well established in neurobiology and basic research, its use in bioprocess development is still emerging. Some optogenetic switches have been implemented in yeasts for different purposes, taking advantage of a wide repertoire of biological parts and relatively easy genetic manipulation. In this review, we cover the current strategies used for the construction of yeast strains to be used in optogenetically controlled protein or metabolite production, as well as the operational aspects to be considered for the scale-up of this type of process. Finally, we discuss the main applications of optogenetic switches in yeast systems and highlight the main advantages and challenges of bioprocess development considering future directions for this field.

Implementation of a Design of Experiments to Improve Periplasmic Yield of Functional ScFv Antibodies in a Phage Display Platform

Purpose: Production of functional recombinant antibody fragments in the periplasm of E. coli is a prerequisite step to achieve sufficient reagent for preclinical studies. Thus, the cost-effective and lab-scale production of antibody fragments demands the optimization of culture conditions.

Methods: The culture conditions such as temperature, optical density (OD₆₀₀) at induction, induction time, and IPTG concentration were investigated to optimize the functional expression of a phage-derived scFv molecule using a design of experiment (DoE). Additionally, the effects of different culture media and osmolyte supplements on the expression yield of scFv were examined.

Results: The developed 2FI regression model indicated the significant linear effect of the incubation temperature, the induction time, and the induction OD₆₀₀ on the expression yield of functional scFv. Besides, the statistical analysis indicated that two significant interactions of the temperature/induction time and the temperature/induction OD₆₀₀ significantly interplay to increase the yield. Further optimization showed that the expression level of functional scFv was the most optimal when the cultivation was undertaken either in the TB medium or in the presence of media supplements of 0.5 M sorbitol or 100 mM glycine betaine.

Conclusion: In the present study, for the first time, we successfully implemented DoE to comprehensively optimize the culture conditions for the expression of scFv molecules in a phage antibody display setting, where scFv molecules can be isolated from a tailor-made phage antibody library known as "Human Single Fold scFv Library I."

Efficient Molecular Biological Manipulations with Improved Strategies Based on Novel Escherichia coli Vectors

In this study, some novel plasmids have been constructed for flexible and zero-background molecular cloning, more efficient expression, and purification of proteins with improved strategies. The plasmids pANY4-pL18-ccdB and pANY4-pR18/pL18-ccdB have different promoters in the complementary DNA strands. Therefore, recombinant plasmids for either isopropyl-β-d-thiogalactoside-induced or temperature-induced protein expression could be simultaneously constructed in a single molecular cloning process for parallel comparison. Intriguingly, the mutated pL18 and pR18/pL18 promoters performed similar to or even better than the T7 promoter when used for promoting the expression of the GFP or pfLamA enzyme. Moreover, the plasmid pANY8 containing the His-elastin-like polypeptide (ELP)-intein multifunctional tag was constructed, and special purification protocol was designed to obtain purified proteins without the requirement of time-consuming dialysis steps to remove imidazole and high concentration of salt ions. Additionally, the urea-based denaturation and refolding processes can be conveniently integrated into the ELP-mediated precipitation protocol for purification of insoluble inclusion bodies, omitting the time-consuming dialysis steps.

Enhanced Recombinant Protein Production Under Special Environmental Stress

Regardless of bacteria or eukaryotic microorganism hosts, improving their ability to express heterologous proteins is always a goal worthy of elaborate study. In addition to traditional methods including intracellular synthesis process regulation and extracellular environment optimization, some special or extreme conditions can also be employed to create an enhancing effect on heterologous protein production. In this review, we summarize some extreme environmental factors used for the improvement of heterologous protein expression, including low temperature, hypoxia, microgravity and high osmolality. The applications of these strategies are elaborated with examples of well-documented studies. We also demonstrated the confirmed or hypothetical mechanisms of environment stress affecting the host behaviors. In addition, multi-omics techniques driving the stress-responsive research for construction of efficient microbial cell factories are also prospected at the end.

Thermoinducible expression system for producing recombinant proteins in Escherichia coli: advances and insights

Recombinant protein (RP) production from Escherichia coli has been extensively studied to find strategies for increasing product yields. The thermoinducible expression system is commonly employed at the industrial level to produce various RPs which avoids the addition of chemical inducers, thus minimizing contamination risks. Multiple aspects of the molecular origin and biotechnological uses of its regulatory elements (pL/pR promoters and cI857 thermolabile repressor) derived from bacteriophage λ provide knowledge to improve the bioprocesses using this system. Here, we discuss the main aspects of the potential use of the λpL/pR-cI857 thermoinducible system for RP production in E. coli, focusing on the approaches of investigations that have contributed to the advancement of this expression system. Metabolic and physiological changes that occur in the host cells caused by heat stress and by RP overproduction are also described. Therefore, the current scenario and the future applications of systems that use heat to induce RP production is discussed to understand the relationship between the activation of the bacterial heat shock response, RP accumulation, and its possible aggregation to form inclusion bodies.

Glucose oxidase: Applications, sources, and recombinant production

Glucose oxidase is a subset of oxidoreductase enzymes that catalyzes the transfer of electrons from an oxidant to a reductant. Glucose oxidases use oxygen as an external electron acceptor that releases hydrogen peroxide (H₂ O₂ ). Glucose oxidase has many applications in commercial processes, including improving the color and taste, increasing the persistence of food materials, removing the glucose from the dried egg, and eliminating the oxygen from different juices and beverages. Moreover, glucose oxidase, along with catalase, is used in glucose testing kits (especially in biosensors) to detect and measure the presence of glucose in industrial and biological solutions (e.g., blood and urine specimens). Hence, glucose oxidase is a valuable enzyme in the industry and medical diagnostics. Therefore, evaluating the structure and function of glucose oxidase is crucial for modifying as well as improving its catalytic properties. Finding different sources of glucose oxidase is an effective way to find the type of enzyme with the desired catalysis. Besides, the recombinant production of glucose oxidase is the best approach to produce sufficient amounts of glucose oxidase for various uses. Accordingly, the study of various aspects of glucose oxidase in biotechnology and bioprocessing is crucial.

β-Galactosidase: From its source and applications to its recombinant form

Carbohydrate-active enzymes are a group of important enzymes playing a critical role in the degradation and synthesis of carbohydrates. Glycosidases can hydrolyze glycosides into oligosaccharides, polysaccharides, and glycoconjugates via a cost-effective approach. Lactase is an important member of β-glycosidases found in higher plants, animals, and microorganisms. β-Galactosidases can be used to degrade the milk lactose for making lactose-free milk, which is sweeter than regular milk and is suitable for lactose-intolerant people. β-Galactosidase is employed by many food industries to degrade lactose and improve the digestibility, sweetness, solubility, and flavor of dairy products. β-Galactosidase enzymes have various families and are applied in the food-processing industries such as hydrolyzed-milk products, whey, and galactooligosaccharides. Thus, this enzyme is a valuable protein which is now produced by recombinant technology. In this review, origins, structure, recombinant production, and critical modifications of β-galactosidase for improving the production process are discussed. Since β-galactosidase is a valuable enzyme in industry and health care, a study of its various aspects is important in industrial biotechnology and applied biochemistry.

A brief overview on the application and sources of α-amylase and expression hosts properties in order to production of recombinant α-amylase

By reducing the activation energy, enzymes accelerate the chemical reaction; therefore, they are good alternative for industrial catalysts. Amylase is a suitable enzyme as a catalyst for the chemical decomposition of starch. This enzyme is of great importance, and its production is highly profitable. α-Amylase is among the most important amylases produced naturally by animals, plants, and microorganisms. Still, the α-amylases produced by bacteria have a special place in industry and commerce. Moreover, a large volume of this enzyme can be produced by selecting an appropriate and optimized host to clone and express the α-amylase gene. The present study briefly reviews the structure, application, sources, and hosts used to produce recombinant α-amylase.

Dynamic control in metabolic engineering: Theories, tools, and applications

Metabolic engineering has allowed the production of a diverse number of valuable chemicals using microbial organisms. Many biological challenges for improving bio-production exist which limit performance and slow the commercialization of metabolically engineered systems. Dynamic metabolic engineering is a rapidly developing field that seeks to address these challenges through the design of genetically encoded metabolic control systems which allow cells to autonomously adjust their flux in response to their external and internal metabolic state. This review first discusses theoretical works which provide mechanistic insights and design choices for dynamic control systems including two-stage, continuous, and population behavior control strategies. Next, we summarize molecular mechanisms for various sensors and actuators which enable dynamic metabolic control in microbial systems. Finally, important applications of dynamic control to the production of several metabolite products are highlighted, including fatty acids, aromatics, and terpene compounds. Altogether, this review provides a comprehensive overview of the progress, advances, and prospects in the design of dynamic control systems for improved titer, rate, and yield metrics in metabolic engineering.

Physical stimuli-responsive cell-free protein synthesis

Cell-free protein synthesis has been developed as a critical platform in synthetic biology. Unlike the cell-based synthesis system, cell-free system activates transcriptional and translational mechanisms in vitro, and can control protein synthesis by artificially adding components or chemicals. However, the control method puts forward higher requirements in terms of accurate and non-toxic control, which cannot be achieved by chemical substances. For cell-free system, physical signal is a kind of ideal spatiotemporal control approach to replace chemical substances, realizing high accuracy with little side effect. Here we review the methods of using physical signals to control gene expression in cell-free systems, including studies based on light, temperature, electric field, and magnetic force. The transfer of these switches into cell-free system further expands the flexibility and controllability of the system, thus further expanding the application capability of cell-free systems. Finally, existing problems such as signal source and signal transmission are discussed, and future applications in pharmaceutical production, delivery and industrial production are further looked into.

Controlled expression of lysis gene E by a mutant of the promoter pL of the thermo-inducible λcI857-pL system

AIMS

To identify a lambda promoter pL mutant that could extend the thermal stability of the thermo-inducible λcI857-pR/pL system and to evaluate the effects of the modified system for the controlled expression of lysis gene E during the production of bacterial ghosts (BGs).

METHODS AND RESULTS

The promoter pL mutant was identified by random mutagenesis and site-directed mutagenesis. The results showed that a T → 35C mutation in the pL promoter was responsible for the phenotype alteration. Under the same induction conditions, the lysis rates of the modified lytic system on Escherichia coli and Salmonella enteritidis were significantly lower than that of the control, while the lysis rates of Escherichia coli with the thermo-inducible lytic system were significantly higher than that of S. enteritidis with the corresponding plasmid (P < 0·05).

CONCLUSIONS

Increasing the heat stability of the thermo-inducible lytic systems decreased lysis efficiency during the production of BGs. There exist differences in the lysis efficiency of thermo-inducible lytic systems between different bacterial strains.

SIGNIFICANCE AND IMPACT OF THE STUDY

These findings enrich current knowledge about modifications to thermo-inducible systems and provide a reference for the application of these modified systems for the production of BGs and controlled gene expression in bacteria.

Heat-responsive and time-resolved transcriptome and metabolome analyses of Escherichia coli uncover thermo-tolerant mechanisms

Current understanding of heat shock response has been complicated by the fact that heat stress is inevitably accompanied by changes in specific growth rates and growth stages. In this study, a chemostat culture was successfully performed to avoid the physico-chemical and biological changes that accompany heatshock, which provided a unique opportunity to investigate the full range of cellular responses to thermal stress, ranging from temporary adjustment to phenotypic adaptation at multi-omics levels. Heat-responsive and time-resolved changes in the transcriptome and metabolome of a widely used E. coli strain BL21(DE3) were explored in which the temperature was upshifted from 37 to 42 °C. Omics profiles were categorized into early (2 and 10 min), middle (0.5, 1, and 2 h), and late (4, 8, and 40 h) stages of heat stress, each of which reflected the initiation, adaptation, and phenotypic plasticity steps of the stress response. The continued heat stress modulated global gene expression by controlling the expression levels of sigma factors in different time frames, including unexpected downregulation of the second heatshock sigma factor gene (rpoE) upon the heat stress. Trehalose, cadaverine, and enterobactin showed increased production to deal with the heat-induced oxidative stress. Genes highly expressed at the late stage were experimentally validated to provide thermotolerance. Intriguingly, a cryptic capsular gene cluster showed considerably high expression level only at the late stage, and its expression was essential for cell growth at high temperature. Granule-forming and elongated cells were observed at the late stage, which was morphological plasticity occurred as a result of acclimation to the continued heat stress. Whole process of thermal adaptation along with the genetic and metabolic changes at fine temporal resolution will contribute to far-reaching comprehension of the heat shock response. Further, the identified thermotolerant genes will be useful to rationally engineer thermotolerant microorganisms.

A tight cold-inducible switch built by coupling thermosensitive transcriptional and proteolytic regulatory parts

Natural organisms have evolved intricate regulatory mechanisms that sense and respond to fluctuating environmental temperatures in a heat- or cold-inducible fashion. Unlike dominant heat-inducible switches, very few cold-inducible genetic switches are available in either natural or engineered systems. Moreover, the available cold-inducible switches still have many shortcomings, including high leaky gene expression, small dynamic range (<10-fold) or broad transition temperature (>10°C). To address these problems, a high-performance cold-inducible switch that can tightly control target gene expression is highly desired. Here, we introduce a tight and fast cold-inducible switch that couples two evolved thermosensitive variants, TF_ts and TEV_ts, as well as an additional Mycoplasma florum Lon protease (mf-Lon) to effectively turn-off target gene expression via transcriptional and proteolytic mechanisms. We validated the function of the switch in different culture media and various Escherichia coli strains and demonstrated its tightness by regulating two morphogenetic bacterial genes and expressing three heat-unstable recombinant proteins, respectively. Moreover, the additional protease module enabled the cold-inducible switch to actively remove the pre-existing proteins in slow-growing cells. This work establishes a high-performance cold-inducible system for tight and fast control of gene expression which has great potential for basic research, as well as industrial and biomedical applications.

Rebalancing microbial carbon distribution for L-threonine maximization using a thermal switch system

In metabolic engineering, unbalanced microbial carbon distribution has long blocked the further improvement in yield and productivity of high-volume natural metabolites. Current studies mostly focus on regulating desired biosynthetic pathways, whereas few strategies are available to maximize L-threonine efficiently. Here, we present a strategy to guarantee the supply of reduced cofactors and actualize L-threonine maximization by regulating cellular carbon distribution in central metabolic pathways. A thermal switch system was designed and applied to divide the whole fermentation process into two stages: growth and production. This system could rebalance carbon substrates between pyruvate and oxaloacetate by controlling the heterogenous expression of pyruvate carboxylase and oxaloacetate decarboxylation that responds to temperature. The system was tested in an L-threonine producer Escherichia coli TWF001, and the resulting strain TWF106/pFT24rp overproduced L-threonine from glucose with 111.78% molar yield. The thermal switch system was then employed to switch off the L-alanine synthesis pathway, resulting in the highest L-threonine yield of 124.03%, which exceeds the best reported yield (87.88%) and the maximum available theoretical value of L-threonine production (122.47%). This inducer-free genetic circuit design can be also developed for other biosynthetic pathways to increase product conversion rates and shorten production cycles.

High-level production of industrially relevant oxidases by a two-stage fed-batch approach: overcoming catabolite repression in arabinose-inducible Escherichia coli systems

With the growing interest in enzyme applications, there is an urgent demand for economic, affordable, and flexible enzyme production processes. In the present paper, we developed a high cell density fed-batch process for the production of two cofactor-containing oxidase, 5-hydroxymethylfurfural oxidase (HMFO) and eugenol oxidase (EUGO). The approach involved the arabinose-inducible system to drive the expression while using mineral media. In order to overcome a major drawback of arabinose-inducible promoters, carbon catabolite repression, (CCR) by glucose, we developed a high cell density culture (HCDC), two-stage fed-batch protocol allowing us to reach cell densities exceeding 70 g/L of dry cell weight (DCW) using glucose as carbon source. Then, induction was achieved by adding arabinose, while changing the carbon source to glycerol. This strategy allowed us to obtain an eightfold increase in recombinant HMFO titer when compared with a reference batch fermentation in Erlenmeyer flasks using terrific broth (TB), typically used with arabinose-inducible strains. The optimized protocol was also tested for expression of a structurally unrelated oxidase, EUGO, where a similar yield was achieved. Clearly, this two-step protocol in which a relatively cheap medium (when compared to TB) can be used reduces costs and provides a way to obtain protein production levels similar to those of IPTG-based systems. KEY POINTS: • Arabinose promoters are not well suited for HCDC production due to CCR effect. • This drawback has been overcome by using a two-stage Fed-batch protocol. • Protein yield has been increased by an eightfold factor, improving process economics.

Developing a new class of engineered live bacterial therapeutics to treat human diseases

A complex interplay of metabolic and immunological mechanisms underlies many diseases that represent a substantial unmet medical need. There is an increasing appreciation of the role microbes play in human health and disease, and evidence is accumulating that a new class of live biotherapeutics comprised of engineered microbes could address specific mechanisms of disease. Using the tools of synthetic biology, nonpathogenic bacteria can be designed to sense and respond to environmental signals in order to consume harmful compounds and deliver therapeutic effectors. In this perspective, we describe considerations for the design and development of engineered live biotherapeutics to achieve regulatory and patient acceptance.

The role microbes play in human health and the ability of synthetic biology to engineer microbial properties opens up new ways of treating disease. In this perspective, the authors describe the design and development of these living therapeutics.

An autoinducible trp-T7 expression system for production of proteins and biochemicals in Escherichia coli

Inducible expression systems can be applied to control the expression of proteins or biochemical pathways in cell factories. However, several of the established systems require the addition of expensive inducers, making them unfeasible for large‐scale production. Here, we establish a genome integrated trp‐T7 expression system where tryptophan can be used to control the induction of a gene or a metabolic pathway. We show that the initiation of gene expression from low‐ and high‐copy vectors can be tuned by varying the initial concentration of tryptophan or yeast extract, and that expression is tightly regulated and homogenous when compared with the commonly used lac‐T7 system. Finally, we apply the trp‐T7 expression system for the production of l‐serine, where we reach titers of 26 g/L in fed‐batch fermentation.