Photochemical tissue bonding with chitosan adhesive films

Photodynamic Treatment of Human Breast and Prostate Cancer Cells Using Rose Bengal-Encapsulated Nanoparticles

Cancer, a prominent cause of death, presents treatment challenges, including high dosage requirements, drug resistance, poor tumour penetration and systemic toxicity in traditional chemotherapy. Photodynamic therapy, using photosensitizers like rose bengal (RB) with a green laser, shows promise against breast cancer cells in vitro. However, the hydrophilic RB struggles to efficiently penetrate the tumour site due to the unique clinical microenvironment, aggregating around rather than entering cancer cells. In this study, we have synthesized and characterized RB-encapsulated chitosan nanoparticles with a peak particle size of ~200 nm. These nanoparticles are readily internalized by cells and, in combination with a green laser (λ = 532 nm) killed 94-98% of cultured human breast cancer cells (MCF-7) and prostate cancer cells (PC3) at a low dosage (25 μg/mL RB-nanoparticles, fluence ~126 J/cm2, and irradiance ~0.21 W/cm2). Furthermore, these nanoparticles are not toxic to cultured human normal breast cells (MCF10A), which opens an avenue for translational applications.

Chitosan adhesives with sub-micron structures for photochemical tissue bonding

We describe a method for fabricating biocompatible chitosan-based adhesives with sub-micron structures to enhance tissue bonding. This procedure avoids coating and chemical modification of structures and requires a simple drop-casting step for the adhesive film formation. Chitosan thin films (27±3 μm) were fabricated with sub-micron pillars (rectangular cuboid with height ∼150 nm, square dimension ∼1 μm and pitch ∼2 μm) or holes (diameter ~500 nm or ~1 μm, depth ~100 or 400 nm, pitch of 1 or 2 μm). Polydimethylsiloxane moulds were used as negative templates for the adhesive solution that was cast and then allowed to dry to form thin films. These were applied on bisected rectangular strips of small sheep intestine and photochemically bonded by a green laser (λ= 532 nm, irradiance ∼110 J/cm2). The tissue repair was subsequently measured using a computer-interfaced tensiometer. The mould sub-micron structures were reproduced in the chitosan adhesive with high fidelity. The adhesive with pillars achieved the highest bonding strength (17.1±1.2 kPa) when compared to the adhesive with holes (13.0±1.3 kPa, p<0.0001, one-way ANOVA, n=15). The production of chitosan films with patterned pillars or holes in the sub-micron range was demonstrated, using a polydimethylsiloxane mould and a single drop-casting step. This technique is potentially scalable to produce adhesives of larger surface areas.

Rapid Ultratough Topological Tissue Adhesives

Tissue adhesives capable of achieving strong and tough adhesion in permeable wet environments are useful in many biomedical applications. However, adhesion generated through covalent bond formation directly with the functional groups of tissues (i.e., COOH and NH2  groups in collagen), or using non-covalent interactions can both be limited by weak, unstable, or slow adhesion. Here, it is shown that by combining pH-responsive bridging chitosan polymer chains and a tough hydrogel dissipative matrix one can achieve unprecedented ultratough adhesion to tissues (>2000 J m-2 ) in 5-10 min without covalent bond formation. The strong non-covalent adhesion is shown to be stable under physiologically relevant conditions and strongly influenced by chitosan molecular weight, molecular weight of polymers in the matrix, and pH. The adhesion mechanism relies primarily on the topological entanglement between the chitosan chains and the permeable adherends. To further expand the applicability of the adhesives, adhesion time can be decreased by dehydrating the hydrogel matrix to facilitate rapid chitosan interpenetration and entanglement (>1000 J m-2  in ≤1 min). The unprecedented adhesive properties presented in this study open opportunities for new strategies in the development of non-covalent tissue adhesives and numerous bioapplications.

Upconversion nanomaterials and delivery systems for smart photonic medicines and healthcare devices

In the past decade, upconversion (UC) nanomaterials have been extensively investigated for the applications to photomedicines with their unique features including biocompatibility, near-infrared (NIR) to visible conversion, photostability, controllable emission bands, and facile multi-functionality. These characteristics of UC nanomaterials enable versatile light delivery for deep tissue biophotonic applications. Among various stimuli-responsive delivery systems, the light-responsive delivery process has been greatly advantageous to develop spatiotemporally controllable on-demand "smart" photonic medicines. UC nanomaterials are classified largely to two groups depending on the photon UC pathway and compositions: inorganic lanthanide-doped UC nanoparticles and organic triplet-triplet annihilation UC (TTA-UC) nanomaterials. Here, we review the current-state-of-art inorganic and organic UC nanomaterials for photo-medicinal applications including photothermal therapy (PTT), photodynamic therapy (PDT), photo-triggered chemo and gene therapy, multimodal immunotherapy, NIR mediated neuromodulations, and photochemical tissue bonding (PTB). We also discuss the future research direction of this field and the challenges for further clinical development.

Light-activated photosealing with human amniotic membrane strengthens bowel anastomosis in a hypotensive, trauma-relevant swine model

BACKGROUND

Gastrointestinal anastomotic leakage is a dreaded complication despite advancements in surgical technique. Photochemical tissue bonding (PTB) is a method of sealing tissue surfaces utilizing photoactive dye. We evaluated if crosslinked human amniotic membrane (xHAM) photosealed over the enteroenterostomy would augment anastomotic strength in a trauma-relevant swine hemorrhagic shock model.

METHODS

Yorkshire swine (40-45 kg, n = 14) underwent midline laparotomy and sharp transection of the small intestine 120 cm proximal to the ileocecal fold. Immediately following intestinal transection, a controlled arterial bleed was performed to reach hemorrhagic shock. Intestinal repair was performed after 60 minutes and autotransfusion of the withdrawn blood was performed for resuscitation. Animals were randomized to small intestinal anastomosis by one of the following methods (seven per group): suture repair (SR), or SR with PTB augmentation. Animals were euthanized at postoperative Day 28 and burst pressure (BP) strength testing was performed on all excised specimens.

RESULTS

Mean BP for SR, PTB, and native tissue groups were 229 ± 40, 282 ± 21, and 282 ± 47 mmHg, respectively, with the SR group statistically significantly different on analysis of variance (p = 0.02). Post-hoc Tukey all-pairs comparison demonstrated a statistically significant difference in burst pressure strength between the SR only and the PTB group (p = 0.04). All specimens in SR group ruptured at the anastomosis upon burst pressure testing, while all specimens in the PTB group ruptured at least 2.5 cm from the anastomosis.

CONCLUSION

Photosealing with xHAM significantly augments the strength of small intestinal anastomosis performed in a trauma porcine model.

Emerging bioadhesives: from traditional bioactive and bioinert to a new biomimetic protein-based approach

Bioadhesives have reached significant milestones over the past two decades. Research has shown not only to produce adhesives capable of adhering to dry tissue but recently wet tissue as well. However, most bioadhesives developed have exhibited high adhesion strength yet lack other properties required for versatility in application, such as elasticity, biocompatibility and biodegradability. Adapting from limitations met from early bioadhesives and meeting the current demand allows novel bioadhesives to reach new milestones for the future. In this review, we overview the progression and variations of bioadhesives, current trends, characterisation techniques and conclude with future perspectives for bioadhesives for tissue engineering applications.

Effective photodynamic treatment of Trichophyton species with Rose Bengal

Photodynamic therapy (PDT) with Rose Bengal has previously achieved eradication of Trichophyton rubrum infections causing toenail onychomycosis; however, its antifungal activity against other clinically relevant dermatophytes has yet to be studied. Here, we test the efficacy of PDT using Rose Bengal (140 μM) and 532 nm irradiation (101 J/cm² ) against Trichophyton mentagrophytes and Trichophyton interdigitale spores, in comparison to T. rubrum. A significant reduction (>99%) of T. mentagrophytes and T. interdigitale was observed, while actual eradication of viable T. rubrum was achieved (99.99%). Laser irradiation alone inhibited growth of T. rubrum (55.2%) and T. mentagrophytes (45.2%) significantly more than T. interdigitale (25.5%) (P = .0086), which may indicate an increased presence of fungal pigments, xanthomegnin and melanin. The findings suggest that Rose Bengal-PDT can act against a broader spectrum of fungal pathogens, and with continued development may be employed in a wider range of clinical antifungal applications.

Noninvasive Photochemical Sealing for Achilles Tendon Rupture by Combination of Upconversion Nanoparticles and Photochemical Tissue Bonding Technology

Photochemical tissue bonding (PTB), based on photosensitizer rose bengal (RB) and green light, has been regarded as an effective alternative to surgical suture and has been reported to provide benefits for Achilles tendon repair. Limited to the poor penetration of green light, secondary damage still exists while applying PTB for closed Achilles tendon rupture. This study is aimed at exploring the effects of noninvasive photochemical sealing on Achilles tendon rupture by the combination of PTB and upconversion nanoparticles (UCNPs). The rare-earth UCNPs of NaYF₄ : Yb/Er (Y : Yb : Er = 78 : 20 : 2) were fabricated and then loaded into Chitosan/β-GP hydrogel containing RB to prepare UCNPs@RB/Chitosan/β-GP hydrogel. The properties of UCNPs and UCNP/Chitosan/β-GP hydrogel were characterized by TEM, SEM, DLS, and FTIR analysis. The effects of UCNP and PTB combination were evaluated in an Achilles tendon rupture rat model using histological analysis. Bioluminescence imaging of ROS was performed to explore the potential mechanism. UCNPs had a uniform shape with a diameter of 29.7 ± 2.6 nm. The UCNPs@RB/Chitosan/β-GP hydrogel could upconvert the near-infrared light into green light. The results of histological assessment showed that compared with traditional suture repair, the rats injected with UCNPs@RB/Chitosan/β-GP hydrogel followed by irradiating with near-infrared light and the rats treated with RB solution followed by irradiating with green light had better effects on Achilles tendon repair. The benefits might be related to the generation of ROS in the PTB process. These findings indicated that the combination of PTB and UCNPs@RB/Chitosan/β-GP hydrogel could be used as a noninvasive photochemical sealing for Achilles tendon rupture.

Porous chitosan adhesives with L-DOPA for enhanced photochemical tissue bonding

L-3,4-dihydroxyphenylalanine (L-DOPA) is a naturally occurring catechol that is known to increase the adhesive strength of various materials used for tissue repair. With the aim of fortifying a porous and erodible chitosan-based adhesive film, L-DOPA was incorporated in its fabrication for stronger photochemical tissue bonding (PTB), a repair technique that uses light and a photosensitiser to promote tissue adhesion. The results showed that L-DOPA did indeed increase the tissue bonding strength of the films when photoactivated by a green LED, with a maximum strength recorded of approximately 30 kPa, 1.4 times higher than in its absence. The addition of L-DOPA also did not appreciably change the swelling, mechanical and erodible properties of the film. This study showed that strong, porous and erodible adhesive films for PTB made from biocompatible materials can be obtained through a simple inclusion of a natural additive such as L-DOPA, which was simply mixed with chitosan without any chemical modifications. In vitro studies using human fibroblasts showed no negative effect on cell proliferation indicating that these films are biocompatible. The films are convenient for various surgical applications as they can provide strong tissue support and a microporous environment for cellular infusion without the use of sutures. STATEMENT OF SIGNIFICANCE: Tissue adhesives are not as strong as sutures on wounds under stress. Our group has previously demonstrated that strong sutureless tissue repair can be realised with chitosan-based adhesive films that photochemically bond to tissue when irradiated with green light. The advantage of this technique is that films are easier to handle than glues and sutures, and their crosslinking reactions can be controlled with light. However, these films are not optimal for high-tension tissue regenerative applications because of their non-porous structure, which cannot facilitate cell and nutrient exchange at the wound site. The present study resolves this issue, as we obtained a strong and porous photoactivated chitosan-based adhesive film, by simply using freeze drying and adding L-DOPA.

Laryngeal adductor function following potassium titanyl phosphate laser welding of the recurrent laryngeal nerve

OBJECTIVES/HYPOTHESIS

Recurrent laryngeal nerve (RLN) transection injuries may occur during thyroidectomy and other surgical procedures. Laser nerve welding has been shown to cause less technique-related axonal damage than the traditional suture method. We compared functional adductor results using these two methods of RLN repair.

STUDY DESIGN

Animal model.

METHODS

Canine hemilarynges underwent pretreatment testing of laryngeal adductor function, followed by RLN transection and repair using potassium titanyl phosphate (KTP) laser welding (n = 8) or microneural suture (n = 16) techniques. Six months later, adductor function was measured again and expressed as a proportion of the pretreatment value.

RESULTS

The mean laryngeal adductor pressure ratios were 82.4% (95% confidence interval [CI]: 72.8%-92.0%) for the laser repair group and 55.5% (95% CI: 49.4%-61.6%) for the suture control group, with a difference of 26.9% (95% CI: 15.3%-38.5%). Both spontaneous and stimulated glottic closure was observed in the laser welding and microsuture repair groups.

CONCLUSIONS

Laser nerve welding resulted in greater strength of adduction than suture repair of an acutely transected RLN. Suture anastomosis may traumatize more axons than the laser. Stronger vocal fold adduction is associated clinically with better protection from aspiration and improved voice outcomes. KTP laser welding should be considered for anastomosis of the RLN and other nerves.

LEVEL OF EVIDENCE

NA Laryngoscope, 130:1764-1769, 2020.

Porous Chitosan Films Support Stem Cells and Facilitate Sutureless Tissue Repair

Photochemical tissue bonding with chitosan-based adhesive films is an experimental surgical technique that avoids the risk of thermal tissue injuries and the use of sutures to maintain strong tissue connection. This technique is advantageous over other tissue repair methods as it is minimally invasive and does not require mixing of multiple components before or during application. To expand the capability of the film to beyond just a tissue bonding device and promote tissue regeneration, in this study, we designed bioadhesive films that could also support stem cells. The films were modified with oligomeric chitosan to tune their erodibility and made porous through freeze-drying for better tissue integration. Of note, porous adhesive films (pore diameter ∼110 μm), with 10% of the chitosan being oligomeric, could retain similar tissue bonding strengths (13-15 kPa) to that of the nonporous chitosan-based adhesives used in previous studies when photoactivated. When tested in vitro, these films exhibited a mass loss of ∼20% after 7 days, swelling ratios of ∼270-300%, a percentage elongation of ∼90%, and both a tensile strength and Young's modulus of ∼1 MPa. The physical properties of the films were suitable for maintaining the viability and multipotency of bone-marrow-derived human mesenchymal stem cells over the duration of culture. Thus, these biocompatible, photoactivated porous, and erodible adhesive films show promise for applications in controlled cell delivery and regenerative medicine.

Stimulation and Repair of Peripheral Nerves Using Bioadhesive Graft-Antenna

An original wireless stimulator for peripheral nerves based on a metal loop (diameter ≈1 mm) that is powered by a transcranial magnetic stimulator (TMS) and does not require circuitry components is reported. The loop can be integrated in a chitosan scaffold that functions as a graft when applied onto transected nerves (graft-antenna). The graft-antenna is bonded to rat sciatic nerves by a laser without sutures; it does not migrate after implantation and is able to trigger steady compound muscle action potentials for 12 weeks (CMAP ≈1.3 mV). Eight weeks postoperatively, axon regeneration is facilitated in transected nerves that are repaired with the graft-antenna and stimulated by the TMS for 1 h per week. The graft-antenna is an innovative and minimally-invasive device that functions concurrently as a wireless stimulator and adhesive scaffold for nerve repair.

Voltaglue Bioadhesives Energized with Interdigitated 3D-Graphene Electrodes

Soft tissue fixation of implant and bioelectrodes relies on mechanical means (e.g., sutures, staples, and screws), with associated complications of tissue perforation, scarring, and interfacial stress concentrations. Adhesive bioelectrodes address these shortcomings with voltage cured carbene-based bioadhesives, locally energized through graphene interdigitated electrodes. Electrorheometry and adhesion structure activity relationships are explored with respect to voltage and electrolyte on bioelectrodes synthesized from graphene 3D-printed onto resorbable polyester substrates. Adhesive leachates effects on in vitro metabolism and human-derived platelet-rich plasma response serves to qualitatively assess biological response. The voltage activated bioadhesives are found to have gelation times of 60 s or less with maximum shear storage modulus (G') of 3 kPa. Shear modulus mimics reported values for human soft tissues (0.1-10 kPa). The maximum adhesion strength achieved for the ≈50 mg bioelectrode films is 170 g cm^-2 (17 kPa), which exceeds the force required for tethering of electrodes on dynamic soft tissues. The method provides the groundwork for implantable bio/electrodes that may be permanently incorporated into soft tissues, vis-à-vis graphene backscattering wireless electronics since all components are bioresorbable.

Light treatments of nail fungal infections

Nail fungal infections are notoriously persistent and difficult to treat which can lead to severe health impacts, particularly in the immunocompromized. Current antifungal treatments, including systemic and topical drugs, are prolonged and do not effectively provide a complete cure. Severe side effects are also associated with systemic antifungals, such as hepatotoxicity. Light treatments of onychomycosis are an emerging therapy that has localized photodynamic, photothermal or photoablative action. These treatments have shown to be an effective alternative to traditional antifungal remedies with comparable or better cure rates achieved in shorter times and without systemic side effects. This report reviews significant clinical and experimental studies in the field, highlighting mechanisms of action and major effects related to light therapy; in particular, the impact of light on fungal genetics.

Semitransparent bandages based on chitosan and extracellular matrix for photochemical tissue bonding

BACKGROUND

Extracellular matrices (ECMs) are often used in reconstructive surgery to enhance tissue regeneration and remodeling. Sutures and staples are currently used to fix ECMs to tissue although they can be invasive devices. Other sutureless and less invasive techniques, such as photochemical tissue bonding, cannot be coupled to ECMs because of their intrinsic opacity to light.

RESULTS

We succeeded in fabricating a biocompatible and adhesive device that is based on ovine forestomach matrix (OFM) and a chitosan adhesive. The natural opacity of the OFM has been overcome by adding the adhesive into the matrix that allows for the light to effectively penetrate through it. The OFM-chitosan device is semitransparent (attenuation length ~ 106 µm) and can be photoactivated by green light to bond to tissue. This device does not require sutures or staples and guarantees a bonding strength of ~ 23 kPa.

CONCLUSIONS

A new semitransparent and biocompatible bandage has been successfully fabricated and characterized for sutureless tissue bonding.

Nerve transection repair using laser-activated chitosan in a rat model

OBJECTIVES/HYPOTHESIS

Cranial nerve transection during head and neck surgery is conventionally repaired with microsuture. Previous studies have demonstrated recovery with laser nerve welding (LNW), a novel alternative to microsuture. LNW has been reported to have poorer tensile strength, however. Laser-activated chitosan, an adhesive biopolymer, may promote nerve recovery while enhancing the tensile strength of the repair. Using a rat posterior tibial nerve injury model, we compared four different methods of nerve repair in this pilot study.

STUDY DESIGN

Animal study.

DESIGN

Animals underwent unilateral posterior tibial nerve transection. The injury was repaired by potassium titanyl phosphate (KTP) laser alone (n = 20), KTP + chitosan (n = 12), microsuture + chitosan (n = 12), and chitosan alone (n = 14). Weekly walking tracks were conducted to measure functional recovery (FR). Tensile strength (TS) was measured at 6 weeks.

RESULTS

At 6 weeks, KTP laser alone had the best recovery (FR = 93.4% ± 8.3%). Microsuture + chitosan, KTP + chitosan, and chitosan alone all showed good FR (87.4% ± 13.5%, 84.6% ± 13.0%, and 84.1% ± 10.0%, respectively). One-way analysis of variance was performed (F(3,56) = 2.6, P = .061). A TS threshold of 3.8 N was selected as a control mean recovery. Three groups-KTP alone, KTP + chitosan, and microsuture + chitosan-were found to meet threshold 60% (95% confidence interval [CI]: 23.1%-88.3%), 75% (95% CI: 46.8%-91.1%), and 100% (95% CI: 75.8%-100.0%), respectively.

CONCLUSIONS

In the posterior tibial nerve model, all repair methods promoted nerve recovery. Laser-activated chitosan as a biopolymer anchor provided good TS and appears to be a novel alternative to microsuture. This repair method may have surgical utility following cranial nerve injury during head and neck surgery.

LEVEL OF EVIDENCE

NA Laryngoscope, 127:E253-E257, 2017.

A conducting polymer with enhanced electronic stability applied in cardiac models

Electrically active constructs can have a beneficial effect on electroresponsive tissues, such as the brain, heart, and nervous system. Conducting polymers (CPs) are being considered as components of these constructs because of their intrinsic electroactive and flexible nature. However, their clinical application has been largely hampered by their short operational time due to a decrease in their electronic properties. We show that, by immobilizing the dopant in the conductive scaffold, we can prevent its electric deterioration. We grew polyaniline (PANI) doped with phytic acid on the surface of a chitosan film. The strong chelation between phytic acid and chitosan led to a conductive patch with retained electroactivity, low surface resistivity (35.85 ± 9.40 kilohms per square), and oxidized form after 2 weeks of incubation in physiological medium. Ex vivo experiments revealed that the conductive nature of the patch has an immediate effect on the electrophysiology of the heart. Preliminary in vivo experiments showed that the conductive patch does not induce proarrhythmogenic activities in the heart. Our findings set the foundation for the design of electronically stable CP-based scaffolds. This provides a robust conductive system that could be used at the interface with electroresponsive tissue to better understand the interaction and effect of these materials on the electrophysiology of these tissues.

Photodynamic therapy for onychomycosis: A systematic review

Other than a cosmetic concern, Onychomycosis is also a prevalent nail disease, which is extremely difficult to treat, and sometimes is refractory to conventional therapy. Moreover, many patients are not eligible to take oral antifungals owing to polypharmacy and comorbidities. Systemic side effects seen with oral antifungals have lead to patient nonadherence and adverse events. Therefore, newer therapies are being investigated for onychomycosis that would be free of systemic complications posed by oral therapy. Photodynamic therapy (PDT) is one of those being currently studied, which involves the use of photosensitizer and a light source to excite the photosensitizer to generate reactive oxygen species. The present review will put some light on PDT as an upcoming treatment modality for onychomycosis. We performed a systematic review of the literature to find the articles relevant to the use of PDT for onychomycosis. From the primary search of 43 articles, 17 papers are included in this review.

Use of novel chitosan hydrogels for chemical tissue bonding of autologous chondral transplants

The objective of this study was to evaluate the effect of chemical tissue bonding (CTB) on adhesion strength, fluid permeability, and cell viability across a cartilaginous graft-host interface in an in vitro autologous chondral transplant (ACT) model. Chitosan-based cross-linkers; Chitosan-Rose Bengal [Chi-RB (Ch-ABC)], Chitosan-Genipin [Chi-GP (Ch-ABC)], and Chitosan-Rose Bengal-Genipin [Chi-RB-GP (Ch-ABC)] were applied to bovine immature cartilage explants after pre-treatment with surface degrading enzyme, Chondroitinase-ABC (Ch-ABC). Adhesion strength, fluid permeability and cell viability were assessed via mechanical push-out shear testing, fluid transport and live/dead cell staining, respectively. All three chitosan-based cross-linkers significantly increased the adhesion strength at the graft-host interface, however, only a statistically significant decrease in fluid permeability was noted in Chi-GP (Ch-ABC) specimen compared to untreated controls. Cell viability was maintained for 7 days of culture across all three treatment groups. These results show the potential clinical relevance of novel chitosan-based hydrogels in enhancing tissue integration and reducing synovial fluid penetration after ACT procedures in diarthoidal joints such as the knee and ankle. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:1139-1146, 2016.

Characterisation of a novel light activated adhesive scaffold: Potential for device attachment

The most common methods for attaching a device to the internal tissues of the human body are via sutures, clips or staples. These attachment techniques require penetration and manipulation of the tissue. Tears and leaks can often be a complication post-attachment, and scarring usually occurs around the attachment sites. To resolve these issues, it is proposed to develop a soft tissue scaffold impregnated with Rose Bengal/Chitosan solution (RBC-scaffold, 0.01% w/v Rose Bengal, 1.7% w/v Medium Molecular Weight Chitosan). This scaffold will initially attach to the tissue via a light activation method. The light activates the dye in the scaffold which causes cross-links to form between the scaffold and tissue, thus adhering them together. This is done without mechanically manipulating the surrounding tissue, thus avoiding the issues associated with current techniques. Eventually, the scaffold will be resorbed and tissue will integrate for long-term attachment. A variety of tests were performed to characterise the RBC-scaffold. Porosity, interconnectivity, and mechanical strength were measured. Light activation was performed with a broad spectrum (380-780nm) 10W LED lamp exposed to various time lengths (2-15min, Fluence range 0.4-3J/cm(2) ). Adhesive strength of the light-activated bond was measured with lap-shear tests performed on porcine stomach tissue. Cell culture viability was also assessed to confirm tissue integration potential. These properties were compared to Variotis™, an aliphatic polyester soft tissue scaffold which has proven to be viable for soft tissue regeneration. The RBC-scaffolds were found to have high porosity (86.46±2.95%) and connectivity, showing rapid fluid movement. The elastic modulus of the RBC-scaffolds (3.55±1.28MPa) was found to be significantly higher than the controls (0.15±0.058MPa, p<0.01) and approached reported values for human gastrointestinal tissue (2.3MPa). The maximum adhesion strength achieved of the RBC-scaffolds was 8.61±2.81kPa after 15min of light activation, this is comparable to the adhesion strength of fibrin glue on scaffolds. Cell attachment was seen to be similar to the controls, but cells appeared to have better cell survivability. In conclusion, the RBC-scaffolds show promise for use as a novel light activated attachment device with potential applications in attaching an anti-reflux valve in the lower oesophagus and also in wound healing applications for stomach ulcers.

Micro- and Nanostructured Biomaterials for Sutureless Tissue Repair

Sutureless procedures for wound repair and closure have recently integrated nanostructured devices to improve their effectiveness and clinical outcome. This review highlights the major advances in gecko-inspired bioadhesives that relies mostly on van der Waals bonding forces. These are challenged by the moist environment of surgical settings that weaken adherence to tissue. The incorporation of nanoparticles in biomatrices and their role in tissue repair and drug delivery is also reviewed with an emphasis on procedures involving adhesives that are laser-activated. Nanostructured adhesive devices have the advantage of being minimally invasive to tissue, can seal wounds, and deliver drugs in situ. All these tasks are very difficult to accomplish by sutures or staples that are invasive to host organs and often cause scarring.

Laser-assisted vessel welding: state of the art and future outlook

Laser-assisted vascular welding (LAVW) is an experimental technique being developed as an alternative to suture anastomosis. In comparison to mechanical anastomosis, LAVW is less traumatic, non-immunogenic, provides immediate water tight sealant, and possibly a faster and easier procedure for minimally invasive surgery. This review focuses on technical advances to improve welding strength and to reduce thermal damage in LAVW. In terms of welding strength, LAVW has evolved from the photothermally-induced microvascular anastomosis, requiring stay sutures to support welding strength, to sutureless anastomoses of medium-sized vessels, withstanding physiological and supraphysiological pressure. Further improvements in anastomotic strength could be achieved by the use of chromophore-containing albumin solder and the employment of (biocompatible) polymeric scaffolds. The anastomotic strength and the stability of welds achieved with such a modality, referred to as scaffold- and solder-enhanced LAVW (ssLAVW), are dependent on the intermolecular bonding of solder molecules (cohesive bonding) and the bonding between solder and tissue collagen (adhesive bonding). Presently, the challenges of ssLAVW include (1) obtaining an optimal balance between cohesive and adhesive bonding and (2) minimizing thermal damage. The modulation of thermodynamics during welding, the application of semi-solid solder, and the use of a scaffold that supports both cohesive and adhesive strength are essential to improve welding strength and to limit thermal damage.

Long term recovery of median nerve repair using laser-activated chitosan adhesive films

Sutures remain the standard peripheral nerve repair technique, whether applied directly or indirectly to nerve tissue. Unfortunately, significant postoperative complications can result, such as inflammation, neuroma formation and foreign body reactions. Photochemical-tissue-bonding (PTB) using rose Bengal (RB) integrated into a chitosan bioadhesive is an alternative nerve repair device that removes the need for sutures. Rats were arranged into three groups: RB-chitosan adhesives-repair, end-to-end epineural suture-repair (surgical standard) and sham laser-irradiated control. Groups were compared through histological assessment, electrophysiological recordings and grip motor strength. RB-chitosan adhesive repaired nerves displayed comparable results when compared to the standard suture-repair based on histological and electrophysiological findings. Functionally, RB-chitosan adhesive was associated with a quicker and more pronounced recovery of grip force when compared to the suture-repair.

Novel gigahertz frequency dielectric relaxations in chitosan films

Molecular relaxations of chitosan films have been investigated in the wide frequency range of 0.1 to 3 × 10(9) Hz from -10 °C to 110 °C using dielectric spectroscopy. For the first time, two high-frequency relaxation processes (in the range 10(8) to 3 × 10(9) Hz) are reported in addition to the low frequency relaxations α and β. These two relaxation processes are related to the vibrations of OH and NH2/NH3(+), respectively. The high-frequency relaxations exhibit Arrhenius-type dependencies in the temperature range 10 °C to 54 °C with negative activation energy; this observation is traceable to hydrogen bonding reorientation. At temperatures above the glass transition temperature (54 °C), the activation energy changes from negative to positive values due to breaking of hydrogen bonding and water loss. Upon cooling in a sealed environment, the activation energies of two relaxation processes are nearly zero. FTIR and XRD analyses reveal associated structural changes upon heating and cooling. These two new high-frequency relaxation processes can be attributed to the interaction of bound water with OH and NH2/NH3(+), respectively. A plausible scenario for these high-frequency relaxations is discussed in light of impedance spectroscopy, TGA, FTIR and XRD measurements.

Tissue repair strength using chitosan adhesives with different physical-chemical characteristics

A range of chitosan-based biomaterials have recently been used to perform sutureless, laser-activated tissue repair. Laser-activation has the advantage of bonding to tissue through a non-contact, aseptic mechanism. Chitosan adhesive films have also been shown to adhere to sheep intestine strongly without any chemical modification to chitosan. In this study, we continue to investigate chitosan adhesive films and explore the impact on the tissue repair strength and tensile strength characteristics of four types of adhesive film based on chitosan with different molecular weight and degree of deacetylation. Results showed that adhesives based on chitosan with medium molecular weight achieved the highest bonding strength, tensile strength and E-modulus when compared to the other adhesives.

An in vitro study of the photodynamic effect of rose bengal on Trichophyton rubrum

Onychomycosis, a fungal infection of the finger or toenails, is predominantly caused by Trichophyton rubrum. Treatment is difficult due to high recurrence rates and problems with treatment compliance. For these reasons, alternative therapies are needed. Here we describe the photoactivation of Rose Bengal (RB) using a green laser (λ = 532 nm) at fluences of 68, 133 and 228 J/cm(2) , and assess its fungicidal activity on T. rubrum spore suspensions. A 140 µM RB solution was able to induce a fungicidal effect on T. rubrum when photosensitized with the fluence of 228 J/cm(2) . RB photosensitization using a green laser provides a potential novel treatment for T. rubrum infections.

Ex vivo proof-of-concept of end-to-end scaffold-enhanced laser-assisted vascular anastomosis of porcine arteries

OBJECTIVE

The low welding strength of laser-assisted vascular anastomosis (LAVA) has hampered the clinical application of LAVA as an alternative to suture anastomosis. To improve welding strength, LAVA in combination with solder and polymeric scaffolds (ssLAVA) has been optimized in vitro. Currently, ssLAVA requires proof-of-concept in a physiologically representative ex vivo model before advancing to in vivo studies. This study therefore investigated the feasibility of ex vivo ssLAVA in medium-sized porcine arteries.

METHODS

Scaffolds composed of poly(ε-caprolactone) (PCL) or poly(lactic-co-glycolic acid) (PLGA) were impregnated with semisolid solder and placed over coapted aortic segments. ssLAVA was performed with a 670-nm diode laser. In the first substudy, the optimum number of laser spots was determined by bursting pressure analysis. The second substudy investigated the resilience of the welds in a Langendorf-type pulsatile pressure setup, monitoring the number of failed vessels. The type of failure (cohesive vs adhesive) was confirmed by electron microscopy, and thermal damage was assessed histologically. The third substudy compared breaking strength of aortic repairs made with PLGA and semisolid genipin solder (ssLAVR) to repairs made with BioGlue.

RESULTS

ssLAVA with 11 lasing spots and PLGA scaffold yielded the highest bursting pressure (923 ± 56 mm Hg vs 703 ± 96 mm Hg with PCL ssLAVA; P = .0002) and exhibited the fewest failures (20% vs 70% for PCL ssLAVA; P = .0218). The two failed PLGA ssLAVA arteries leaked at 19 and 22 hours, whereas the seven failed PCL ssLAVA arteries burst between 12 and 23 hours. PLGA anastomoses broke adhesively, whereas PCL welds failed cohesively. Both modalities exhibited full-thickness thermal damage. Repairs with PLGA scaffold yielded higher breaking strength than BioGlue repairs (323 ± 28 N/cm(2) vs 25 ± 4 N/cm(2), respectively; P = .0003).

CONCLUSIONS

PLGA ssLAVA yields greater anastomotic strength and fewer anastomotic failures than PCL ssLAVA. Aortic repairs with BioGlue were inferior to those produced with PLGA ssLAVR. The results demonstrate the feasibility of ssLAVA/R as an alternative method to suture anastomosis or tissue sealant. Further studies should focus on reducing thermal damage.

Laser-activated adhesive films for sutureless median nerve anastomosis

A novel chitosan adhesive film that incorporates the dye 'Rose Bengal' (RB) was used in conjunction with a green laser to repair transected rat median nerves in vivo. Histology and electrophysiological recording assessed the impact of the laser-adhesive technique on nerves. One week post-operatively, the sham-control group (laser-adhesive technique applied on un-transected nerves) conserved the average number and size of myelinated fibres in comparison to its contralateral side and electrophysiological recordings demonstrated no significant difference with un-operated nerves. Twelve weeks after the laser-adhesive anastomoses, nerves were in continuity with regenerated axons that crossed the anastomotic site.

In vivo laser assisted microvascular repair and end-to-end anastomosis by means of indocyanine green-infused chitosan patches: a pilot study

BACKGROUND AND OBJECTIVES

Laser-based repairing techniques offer several advantages respect to standard suturing in microsurgery. In this work we evaluate the applicability and feasibility of two innovative laser-based approaches for microvascular repair and anastomoses: (1) laser-assisted vascular repair (LAVR); (2) laser-assisted end-to-end vascular anastomosis (LAVA). All these procedures have been executed by the use of diode laser irradiation and chitosan-patches infused with Indocyanine Green (ICG).

STUDY DESIGN/MATERIALS AND METHODS

Experiments were performed on 30 rabbits. Twenty animals underwent LAVR and 10 end-to-end LAVA procedures. In the LAVR group, a 5-mm longitudinal cut was performed on the common carotid artery (CCA), then an ICG-infused chitosan patch was topically applied and laser-soldered over the arterial lesion. In the LAVA group the end-to-end anastomosis was executed on CCA by means of application of the three interrupted sutures and subsequent laser soldering of the ICG-infused patch. Animals underwent different follow-up periods (2, 7, 30, and 90 days). At the end of every follow-up, the animals were re-anesthetized and a microdoppler analysis was performed in order to check patency of the treated vessels. Then soldered segments were excised and subjected to histological and ultrastructural evaluations.

RESULTS

At the end of surgery no bleeding from the treated segment was observed; all the treated vessels were patent. At the end of follow-up periods, no signs of perivascular haemorrhage were found. An intraoperative microdoppler evaluation assessed the patency of all the treated vessels. Histology showed a good reorganization of the vascular wall structures and an early endothelial regeneration was observed by SEM.

CONCLUSIONS

Our study demonstrated the efficacy of laser tissue soldering by means of ICG-infused chitosan patches for the in vivo repairing of microvascular lesions and end-to-end anastomoses. This approach offers several advantages over conventional suturing methods and is technically easy to perform, minimizing the surgical trauma to vessels.

Biofilm formation within the interface of bovine root dentin treated with conjugated chitosan and sealer containing chitosan nanoparticles

INTRODUCTION

The purpose of this study was to assess biofilm formation within sealer-dentin interfaces of root segments filled with gutta-percha and sealer incorporated with chitosan (CS) nanoparticles with and without canal surface treatment with different formulations of CS.

METHODS

Standardized canals of 4-mm bovine root segments (N = 35) were filled with gutta-percha and pulp canal sealer incorporated with CS nanoparticles without surface treatment (group CS) or after surface treatment with phosphorylated CS (group PHCS), CS-conjugated rose bengal and photodynamic irradiation (group CSRB), or a combination of both PHCS and CSRB (group RBPH). The control group was filled with gutta-percha and an unmodified sealer. After 7 days of setting, specimens were aged in buffered solution at 37°C for 1 or 4 weeks. Monospecies biofilms of Enterococcus faecalis were grown on specimens for 7 days in a chemostat-based biofilm fermentor. Biofilm formation within the sealer-dentin interface was assessed with confocal laser scanning microscopy.

RESULTS

In the 4-week-aged specimens only, the mean biofilm areas were significantly smaller than in the control for the CS (P = .008), PHCS (P = .012), and RBPH (P = .034) groups. The percentage of the biofilm-covered interface also was significantly lower than in the control for the CS (P = .024) and PHCS (P = .003) groups. The CS, PHCS, and RBPH groups did not differ significantly.

CONCLUSIONS

Incorporating CS nanoparticles into the zinc oxide-eugenol sealer inhibited biofilm formation within the sealer-dentin interface. This effect was maintained when canals were treated with phosphorylated CS, and it was moderated by canal treatment with CS-conjugated rose bengal and irradiation.

Hybrid nanocomposite films for laser-activated tissue bonding

We report new advancements in the biomedical exploitation of plasmonic nanoparticles as an effective platform for the photothermal repair of biological tissue. Chitosan films are loaded with gold nanorods with intense optical absorption in the "therapeutic window" of deepest light penetration through the body, and then activated by near infrared laser excitation to give adhesion with adjacent connective tissues. The adhesion consists of 0.07 mm(2) welds of ~20 kPa tensile strength at the film/tissue interface, which are obtained by administration of pulses with duration in the hundreds of millisecond timescale from a diode laser at ~130 J cm(-2). We investigate the adhesive effect as a function of pulse power and duration and identify an optimal operative window to achieve effective and reproducible welds with minimal detrimental superheating. These results may prove valuable to standardize laser bonding techniques and meet current needs for new knowledge which is urged by the penetration of nanotechnology into biomedical optics.

Fabrication and application of rose bengal-chitosan films in laser tissue repair

Photochemical tissue bonding (PTB) is a sutureless technique for tissue repair, which is achieved by applying a solution of rose bengal (RB) between two tissue edges(1,2). These are then irradiated by a laser that is selectively absorbed by the RB. The resulting photochemical reactions supposedly crosslink the collagen fibers in the tissue with minimal heat production(3). In this report, RB has been incorporated in thin chitosan films to fabricate a novel tissue adhesive that is laser-activated. Adhesive films, based on chitosan and containing ~0.1 wt% RB, are fabricated and bonded to calf intestine and rat tibial nerves by a solid state laser (λ=532 nm, Fluence~110 J/cm(2), spot size~0.5 cm). A single-column tensiometer, interfaced with a personal computer, is used to test the bonding strength. The RB-chitosan adhesive bonds firmly to the intestine with a strength of 15 ± 6 kPa, (n=30). The adhesion strength drops to 2 ± 2 kPa (n=30) when the laser is not applied to the adhesive. The anastomosis of tibial nerves can be also completed without the use of sutures. A novel chitosan adhesive has been fabricated that bonds photochemically to tissue and does not require sutures.

Interplay between structure and dynamics in chitosan films investigated with solid-state NMR, dynamic mechanical analysis, and X-ray diffraction

Modern solid-state NMR techniques, combined with X-ray diffraction, revealed the molecular origin of the difference in mechanical properties of self-associated chitosan films. Films cast from acidic aqueous solutions were compared before and after neutralization, and the role of the counterion (acetate vs Cl(-)) was investigated. There is a competition between local structure and long-range order. Hydrogen bonding gives good mechanical strength to neutralized films, which lack long-range organization. The long-range structure is better defined in films cast from acidic solutions in which strong electrostatic interactions cause rotational distortion around the chitosan chains. Plasticization by acetate counterions enhances long-range molecular organization and film flexibility. In contrast, Cl(-) counterions act as a defect and impair the long-range organization by immobilizing hydration water. Molecular motion and proton exchange are restricted, resulting in brittle films despite the high moisture content.