1
|
Sharma R, Nath PC, Mohanta YK, Bhunia B, Mishra B, Sharma M, Suri S, Bhaswant M, Nayak PK, Sridhar K. Recent advances in cellulose-based sustainable materials for wastewater treatment: An overview. Int J Biol Macromol 2024; 256:128517. [PMID: 38040157 DOI: 10.1016/j.ijbiomac.2023.128517] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/11/2023] [Revised: 11/24/2023] [Accepted: 11/28/2023] [Indexed: 12/03/2023]
Abstract
Water pollution presents a significant challenge, impacting ecosystems and human health. The necessity for solutions to address water pollution arises from the critical need to preserve and protect the quality of water resources. Effective solutions are crucial to safeguarding ecosystems, human health, and ensuring sustainable access to clean water for current and future generations. Generally, cellulose and its derivatives are considered potential substrates for wastewater treatment. The various cellulose processing methods including acid, alkali, organic & inorganic components treatment, chemical treatment and spinning methods are highlighted. Additionally, we reviewed effective use of the cellulose derivatives (CD), including cellulose nanocrystals (CNCs), cellulose nano-fibrils (CNFs), CNPs, and bacterial nano-cellulose (BNC) on waste water (WW) treatment. The various cellulose processing methods, including spinning, mechanical, chemical, and biological approaches are also highlighted. Additionally, cellulose-based materials, including adsorbents, membranes and hydrogels are critically discussed. The review also highlighted the mechanism of adsorption, kinetics, thermodynamics, and sorption isotherm studies of adsorbents. The review concluded that the cellulose-derived materials are effective substrates for removing heavy metals, dyes, pathogenic microorganisms, and other pollutants from WW. Similarly, cellulose based materials are used for flocculants and water filtration membranes. Cellulose composites are widely used in the separation of oil and water emulsions as well as in removing dyes from wastewater. Cellulose's natural hydrophilicity makes it easier for it to interact with water molecules, making it appropriate for use in water treatment processes. Furthermore, the materials derived from cellulose have wider application in WW treatment due to their inexhaustible sources, low energy consumption, cost-effectiveness, sustainability, and renewable nature.
Collapse
Affiliation(s)
- Ramesh Sharma
- Department of Bio Engineering, National Institute of Technology Agartala, Jirania 799046, India
| | - Pinku Chandra Nath
- Department of Bio Engineering, National Institute of Technology Agartala, Jirania 799046, India; Department of Applied Biology, School of Biological Sciences, University of Science & Technology Meghalaya, Baridua 793101, India
| | - Yugal Kishore Mohanta
- Department of Applied Biology, School of Biological Sciences, University of Science & Technology Meghalaya, Baridua 793101, India; Centre for Herbal Pharmacology and Environmental Sustainability, Chettinad Hospital and Research Institute, Chettinad Academy of Research and Education, Kelambakkam 603103, India
| | - Biswanath Bhunia
- Department of Bio Engineering, National Institute of Technology Agartala, Jirania 799046, India
| | - Bishwambhar Mishra
- Department of Biotechnology, Chaitanya Bharathi Institute of Technology, Hyderabad 500075, India
| | - Minaxi Sharma
- Department of Applied Biology, School of Biological Sciences, University of Science & Technology Meghalaya, Baridua 793101, India
| | - Shweta Suri
- Amity Institute of Food Technology, Amity University Uttar Pradesh, Noida 201301, India
| | - Maharshi Bhaswant
- New Industry Creation Hatchery Center, Tohoku University, Sendai 980 8579, Japan
| | - Prakash Kumar Nayak
- Department of Food Engineering and Technology, Central Institute of Technology Kokrajhar, Kokrajhar 783370, India.
| | - Kandi Sridhar
- Department of Food Technology, Karpagam Academy of Higher Education (Deemed to be University), Coimbatore 641021, India.
| |
Collapse
|
2
|
Shangguan W, Xu H, Ding W, Chen H, Mei X, Zhao P, Cao C, Huang Q, Cao L. Nano-Micro Core-Shell Fibers for Efficient Pest Trapping. NANO LETTERS 2023; 23:11809-11817. [PMID: 38048290 DOI: 10.1021/acs.nanolett.3c03817] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/06/2023]
Abstract
Insect sex pheromones as an alternative to chemical pesticides hold promising prospects in pest control. However, their burst release and duration need to be optimized. Herein, pheromone-loaded core-shell fibers composed of degradable polycaprolactone and polyhydroxybutyrate were prepared by coaxial electrospinning. The results showed that this core-shell fiber had good hydrophobic performance and thermal stability, and the light transmittance in the ultraviolet band was only below 40%, which provided protection to pheromones. The core-shell structure alleviated the burst release of pheromone in the fiber and extended the release time to about 133 days. In the field, the pheromone-loaded core-shell fibers showed the same continuous and efficient trapping of Spodoptera litura as the commercial carriers. More importantly, the electrospun fibers combined with biomaterials had a degradability unmatched by commercial carriers. The structure design strategy provides ideas for the innovative design of pheromone carriers and is a potential tool for the management of agricultural pests.
Collapse
Affiliation(s)
- Wenjie Shangguan
- Institute of Plant Protection, Chinese Academy of Agricultural Sciences, Beijing 100193, China
- College of Modern Agriculture and Ecological Environment, Heilongjiang University, Harbin 150080, China
| | - Hongliang Xu
- College of Modern Agriculture and Ecological Environment, Heilongjiang University, Harbin 150080, China
| | - Wanlong Ding
- Institute of Medicinal Plant Development, Chinese Academy of Medical Sciences, Beijing 100193, China
| | - Huiping Chen
- Institute of Plant Protection, Chinese Academy of Agricultural Sciences, Beijing 100193, China
| | - Xiangdong Mei
- Institute of Plant Protection, Chinese Academy of Agricultural Sciences, Beijing 100193, China
| | - Pengyue Zhao
- Institute of Plant Protection, Chinese Academy of Agricultural Sciences, Beijing 100193, China
| | - Chong Cao
- Institute of Plant Protection, Chinese Academy of Agricultural Sciences, Beijing 100193, China
| | - Qiliang Huang
- Institute of Plant Protection, Chinese Academy of Agricultural Sciences, Beijing 100193, China
| | - Lidong Cao
- Institute of Plant Protection, Chinese Academy of Agricultural Sciences, Beijing 100193, China
| |
Collapse
|
3
|
Wildy M, Lu P. Electrospun Nanofibers: Shaping the Future of Controlled and Responsive Drug Delivery. MATERIALS (BASEL, SWITZERLAND) 2023; 16:7062. [PMID: 38004992 PMCID: PMC10672065 DOI: 10.3390/ma16227062] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/28/2023] [Revised: 11/02/2023] [Accepted: 11/05/2023] [Indexed: 11/26/2023]
Abstract
Electrospun nanofibers for drug delivery systems (DDS) introduce a revolutionary means of administering pharmaceuticals, holding promise for both improved drug efficacy and reduced side effects. These biopolymer nanofiber membranes, distinguished by their high surface area-to-volume ratio, biocompatibility, and biodegradability, are ideally suited for pharmaceutical and biomedical applications. One of their standout attributes is the capability to offer the controlled release of the active pharmaceutical ingredient (API), allowing custom-tailored release profiles to address specific diseases and administration routes. Moreover, stimuli-responsive electrospun DDS can adapt to conditions at the drug target, enhancing the precision and selectivity of drug delivery. Such localized API delivery paves the way for superior therapeutic efficiency while diminishing the risk of side effects and systemic toxicity. Electrospun nanofibers can foster better patient compliance and enhanced clinical outcomes by amplifying the therapeutic efficiency of routinely prescribed medications. This review delves into the design principles and techniques central to achieving controlled API release using electrospun membranes. The advanced drug release mechanisms of electrospun DDS highlighted in this review illustrate their versatility and potential to improve the efficacy of medical treatments.
Collapse
Affiliation(s)
| | - Ping Lu
- Department of Chemistry and Biochemistry, Rowan University, Glassboro, NJ 08028, USA;
| |
Collapse
|
4
|
Li SF, Wu JH, Hu TG, Wu H. Encapsulation of quercetin into zein-ethyl cellulose coaxial nanofibers: Preparation, characterization and its anticancer activity. Int J Biol Macromol 2023; 248:125797. [PMID: 37442510 DOI: 10.1016/j.ijbiomac.2023.125797] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/29/2023] [Revised: 06/21/2023] [Accepted: 07/10/2023] [Indexed: 07/15/2023]
Abstract
In order to efficiently improve the colon-targeted delivery of quercetin, the hydrophobic core-shell nanofibers were fabricated to encapsulate quercetin using ethyl cellulose as the shell and zein as the core by coaxial electrospinning. The encapsulation efficiency of coaxial nanofibers reached >97 %. FTIR and XRD results revealed the interactions between quercetin and wall materials and quercetin was encapsulated in an amorphous state. The thermal stability and surface hydrophobicity of coaxial nanofibers were improved compared to the uniaxial zein fibers. After in vitro gastrointestinal digestion, the quercetin release from core-shell nanofibers was <12.38 %, while the corresponding value for zein fibers was 36.24 %. DPPH and FRAP assays showed that there was no significant difference in the antioxidant activity of quercetin before and after encapsulation. Furthermore, the encapsulated quercetin exhibited similar anti-proliferative activity against HCT-116 cells compared to the free form. The results suggest these coaxial nanofibers have potential applications in functional foods.
Collapse
Affiliation(s)
- Shu-Fang Li
- School of Food Science and Engineering, South China University of Technology, Guangdong Province Key Laboratory for Green Processing of Natural Products and Product Safety, Guangzhou, China
| | - Jia-Hui Wu
- School of Food Science and Engineering, South China University of Technology, Guangdong Province Key Laboratory for Green Processing of Natural Products and Product Safety, Guangzhou, China
| | - Teng-Gen Hu
- Sericultural & Agri-Food Research Institute, Guangdong Academy of Agricultural Sciences, Key Laboratory of Functional Foods, Ministry of Agriculture, Guangdong Key Laboratory of Agricultural Products Processing, Guangzhou, China
| | - Hong Wu
- School of Food Science and Engineering, South China University of Technology, Guangdong Province Key Laboratory for Green Processing of Natural Products and Product Safety, Guangzhou, China.
| |
Collapse
|
5
|
Quercetin- and Rutin-Containing Electrospun Cellulose Acetate and Polyethylene Glycol Fibers with Antioxidant and Anticancer Properties. Polymers (Basel) 2022; 14:polym14245380. [PMID: 36559747 PMCID: PMC9783884 DOI: 10.3390/polym14245380] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/17/2022] [Revised: 12/01/2022] [Accepted: 12/06/2022] [Indexed: 12/13/2022] Open
Abstract
Innovative fibrous materials from cellulose derivative, cellulose acetate (CA) and water-soluble polyether, polyethylene glycol (PEG) loaded with natural biologically active compounds (BAC), quercetin (QUE) and rutin (RUT), have been successfully fabricated by blend electrospinning and dual electrospinning. Scanning electron microscopy revealed that the mean fiber diameters of all the obtained fibers were in the nanometer range. QUE and RUT incorporated in the fibrous mats were in the amorphous state, as evidenced by the performed differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analysis. The presence of the polyether in the developed fibrous material assisted the in vitro release of the biologically active compounds by improving the hydrophilicity and wettability of the mats. Rutin-containing fibrous materials manifest the highest antioxidative activity, as determined by the 2,2-diphenyl-1-picryl-hydrazyl-hydrate free radical method. The cytotoxicity of the fabricated novel materials was evaluated using a tumor cell line and normal mouse fibroblast cells. The mats containing QUE and QUE/RUT independent of the applied spinning method show a higher cytotoxic effect against cancer cells and 3 to 4.5 times lower cytotoxicity to a noncancer cell line. These features make the quercetin- and rutin-containing fibrous materials promising candidates for pharmaceutical, cosmetic, and biomedical use.
Collapse
|
6
|
Electrospinning and its potential in fabricating pharmaceutical dosage form. J Drug Deliv Sci Technol 2022. [DOI: 10.1016/j.jddst.2022.103761] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022]
|
7
|
Cellulose-Based Nanofibers Processing Techniques and Methods Based on Bottom-Up Approach-A Review. Polymers (Basel) 2022; 14:polym14020286. [PMID: 35054691 PMCID: PMC8781687 DOI: 10.3390/polym14020286] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/22/2021] [Revised: 12/27/2021] [Accepted: 01/06/2022] [Indexed: 02/04/2023] Open
Abstract
In the past decades, cellulose (one of the most important natural polymers), in the form of nanofibers, has received special attention. The nanofibrous morphology may provide exceptional properties to materials due to the high aspect ratio and dimensions in the nanometer range of the nanofibers. The first feature may lead to important consequences in mechanical behavior if there exists a particular orientation of fibers. On the other hand, nano-sizes provide a high surface-to-volume ratio, which can have important consequences on many properties, such as the wettability. There are two basic approaches for cellulose nanofibers preparation. The top-down approach implies the isolation/extraction of cellulose nanofibrils (CNFs) and nanocrystals (CNCs) from a variety of natural resources, whereby dimensions of isolates are limited by the source of cellulose and extraction procedures. The bottom-up approach can be considered in this context as the production of nanofibers using various spinning techniques, resulting in nonwoven mats or filaments. During the spinning, depending on the method and processing conditions, good control of the resulting nanofibers dimensions and, consequently, the properties of the produced materials, is possible. Pulp, cotton, and already isolated CNFs/CNCs may be used as precursors for spinning, alongside cellulose derivatives, namely esters and ethers. This review focuses on various spinning techniques to produce submicrometric fibers comprised of cellulose and cellulose derivatives. The spinning of cellulose requires the preparation of spinning solutions; therefore, an overview of various solvents is presented showing their influence on spinnability and resulting properties of nanofibers. In addition, it is shown how bottom-up spinning techniques can be used for recycling cellulose waste into new materials with added value. The application of produced cellulose fibers in various fields is also highlighted, ranging from drug delivery systems, high-strength nonwovens and filaments, filtration membranes, to biomedical scaffolds.
Collapse
|
8
|
Multifunctional Membranes-A Versatile Approach for Emerging Pollutants Removal. MEMBRANES 2022; 12:membranes12010067. [PMID: 35054593 PMCID: PMC8778428 DOI: 10.3390/membranes12010067] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/18/2021] [Revised: 12/29/2021] [Accepted: 12/31/2021] [Indexed: 02/06/2023]
Abstract
This paper presents a comprehensive literature review surveying the most important polymer materials used for electrospinning processes and applied as membranes for the removal of emerging pollutants. Two types of processes integrate these membrane types: separation processes, where electrospun polymers act as a support for thin film composites (TFC), and adsorption as single or coupled processes (photo-catalysis, advanced oxidation, electrochemical), where a functionalization step is essential for the electrospun polymer to improve its properties. Emerging pollutants (EPs) released in the environment can be efficiently removed from water systems using electrospun membranes. The relevant results regarding removal efficiency, adsorption capacity, and the size and porosity of the membranes and fibers used for different EPs are described in detail.
Collapse
|
9
|
Electrosprayed Ethyl Cellulose Core-Shell Microcapsules for the Encapsulation of Probiotics. Pharmaceutics 2021; 14:pharmaceutics14010007. [PMID: 35056907 PMCID: PMC8778685 DOI: 10.3390/pharmaceutics14010007] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/18/2021] [Revised: 12/10/2021] [Accepted: 12/15/2021] [Indexed: 11/23/2022] Open
Abstract
Electrosprayed ethyl cellulose core–shell microcapsules were produced for the encapsulation of probiotic Bifidobacterium animalis subsp. lactis (Bifido). Ethyl cellulose (ETC) was used as a shell material with different core compounds (concentrated Bifido, Bifido–maltodextrin and Bifido–glycerol). The core–shell microcapsules have an average diameter between 3 µm and 15 µm depending on the core compounds, with a distinct interface that separates the core and the shell structure. The ETC microcapsules displayed relatively low water activity (aw below 0.20) and relatively high values of viable cells (109–1011 CFU/g), as counted post-encapsulation. The effect of different core compounds on the stability of probiotics cells over time was also investigated. After four weeks at 30 °C and 40% RH the electrospray encapsulated samples containing Bifido–glycerol in the core showed a loss in viable cells of no more than 3 log loss CFU/g, while the non-encapsulated Bifido lost about 7.57 log CFU/g. Overall, these results suggest that the viability of the Bifido probiotics encapsulated within the core–shell ETC electrosprayed capsules can be extended, despite the fact that the shell matrix was prepared using solvents that typically substantially reduce their viability.
Collapse
|
10
|
Arampatzis AS, Kontogiannopoulos KN, Theodoridis K, Aggelidou E, Rat A, Willems A, Tsivintzelis I, Papageorgiou VP, Kritis A, Assimopoulou AN. Electrospun wound dressings containing bioactive natural products: physico-chemical characterization and biological assessment. Biomater Res 2021; 25:23. [PMID: 34271983 PMCID: PMC8284004 DOI: 10.1186/s40824-021-00223-9] [Citation(s) in RCA: 27] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/29/2021] [Accepted: 06/21/2021] [Indexed: 01/01/2023] Open
Abstract
Background Current research on skin tissue engineering has been focusing on novel therapies for the effective management of chronic wounds. A critical aspect is to develop matrices that promote growth and uniform distribution of cells across the wound area, and at the same time offer protection, as well as deliver drugs that help wound healing and tissue regeneration. In this context, we aimed at developing electrospun scaffolds that could serve as carriers for the bioactive natural products alkannin and shikonin (A/S). Methods A series of polymeric nanofibers composed of cellulose acetate (CA) or poly(ε-caprolactone) (PCL) and varying ratios of a mixture of A/S derivatives, has been successfully fabricated and their physico-chemical and biological properties have been explored. Results Scanning electron microscopy revealed a uniform and bead-free morphology for CA scaffolds, while for PCL beads along the fibers were observed. The average diameters for all nanofibers ranged between 361 ± 47 and 487 ± 88 nm. During the assessment of physicochemical characteristics, CA fiber mats exhibited a more favored profile, while the assessment of the biological properties of the scaffolds showed that CA samples containing A/S mixture up to 1 wt.% achieved to facilitate attachment, survival and migration of Hs27 fibroblasts. With respect to the antimicrobial properties of the scaffolds, higher drug-loaded (1 and 5 wt.%) samples succeeded in inhibiting the growth of Staphylococcus epidermidis and S. aureus around the edges of the fiber mats. Finally, carrying out a structure-activity relationship study regarding the biological activities (fibroblast toxicity/proliferation and antibacterial activity) of pure A/S compounds – present in the A/S mixture – we concluded that A/S ester derivatives and the dimeric A/S augmented cell proliferation after 3 days, whereas shikonin proved to be toxic at 500 nM and 1 μM and alkannin only at 1 μM. Additionally, alkannin, shikonin and acetyl-shikonin showed more pronounced antibacterial properties than the other esters, the dimeric derivative and the A/S mixture itself. Conclusions Taken together, these findings indicate that embedding A/S derivatives into CA nanofibers might be an advantageous drug delivery system that could also serve as a potential candidate for biomedical applications in the field of skin tissue engineering. Supplementary Information The online version contains supplementary material available at 10.1186/s40824-021-00223-9.
Collapse
Affiliation(s)
- Athanasios S Arampatzis
- Laboratory of Organic Chemistry, School of Chemical Engineering, Aristotle University of Thessaloniki (AUTh), 54124, Thessaloniki, Greece.,Natural Products Research Center of Excellence (NatPro-AUTh), Center of Interdisciplinary Research and Innovation of Aristotle University of Thessaloniki (CIRI-AUTh), 57001, Thessaloniki, Greece
| | - Konstantinos N Kontogiannopoulos
- Laboratory of Organic Chemistry, School of Chemical Engineering, Aristotle University of Thessaloniki (AUTh), 54124, Thessaloniki, Greece.,Natural Products Research Center of Excellence (NatPro-AUTh), Center of Interdisciplinary Research and Innovation of Aristotle University of Thessaloniki (CIRI-AUTh), 57001, Thessaloniki, Greece
| | - Konstantinos Theodoridis
- Department of Physiology and Pharmacology, Faculty of Health Sciences, School of Medicine, Aristotle University of Thessaloniki (AUTh), 54124, Thessaloniki, Greece.,cGMP Regenerative Medicine Facility, Department of Physiology and Pharmacology, Faculty of Health Sciences, School of Medicine, Aristotle University of Thessaloniki (AUTh), 54124, Thessaloniki, Greece
| | - Eleni Aggelidou
- Department of Physiology and Pharmacology, Faculty of Health Sciences, School of Medicine, Aristotle University of Thessaloniki (AUTh), 54124, Thessaloniki, Greece.,cGMP Regenerative Medicine Facility, Department of Physiology and Pharmacology, Faculty of Health Sciences, School of Medicine, Aristotle University of Thessaloniki (AUTh), 54124, Thessaloniki, Greece
| | - Angélique Rat
- Laboratory of Microbiology, Department of Biochemistry and Microbiology, Faculty of Sciences, Ghent University, 9000, Ghent, Belgium
| | - Anne Willems
- Laboratory of Microbiology, Department of Biochemistry and Microbiology, Faculty of Sciences, Ghent University, 9000, Ghent, Belgium
| | - Ioannis Tsivintzelis
- Physical Chemistry Laboratory, School of Chemical Engineering, Aristotle University of Thessaloniki (AUTh), 54124, Thessaloniki, Greece
| | - Vassilios P Papageorgiou
- Laboratory of Organic Chemistry, School of Chemical Engineering, Aristotle University of Thessaloniki (AUTh), 54124, Thessaloniki, Greece.,Natural Products Research Center of Excellence (NatPro-AUTh), Center of Interdisciplinary Research and Innovation of Aristotle University of Thessaloniki (CIRI-AUTh), 57001, Thessaloniki, Greece
| | - Aristeidis Kritis
- Department of Physiology and Pharmacology, Faculty of Health Sciences, School of Medicine, Aristotle University of Thessaloniki (AUTh), 54124, Thessaloniki, Greece.,cGMP Regenerative Medicine Facility, Department of Physiology and Pharmacology, Faculty of Health Sciences, School of Medicine, Aristotle University of Thessaloniki (AUTh), 54124, Thessaloniki, Greece
| | - Andreana N Assimopoulou
- Laboratory of Organic Chemistry, School of Chemical Engineering, Aristotle University of Thessaloniki (AUTh), 54124, Thessaloniki, Greece. .,Natural Products Research Center of Excellence (NatPro-AUTh), Center of Interdisciplinary Research and Innovation of Aristotle University of Thessaloniki (CIRI-AUTh), 57001, Thessaloniki, Greece.
| |
Collapse
|
11
|
Zhao L, Orlu M, Williams GR. Electrospun fixed dose combination fibers for the treatment of cardiovascular disease. Int J Pharm 2021; 599:120426. [PMID: 33662468 DOI: 10.1016/j.ijpharm.2021.120426] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/25/2020] [Revised: 02/17/2021] [Accepted: 02/20/2021] [Indexed: 01/17/2023]
Abstract
Fixed dose combinations (FDCs) offer an accessible way to simplify complex therapeutic regimens by the simultaneous presentation of multiple drugs in a single entity to the patient. However, encapsulation of hydrophobic drugs into FDCs possess a number of technical challenges. Electrospinning comprises a convenient way to incorporate multiple hydrophobic drugs into a single formulation in a single step, via the use of an appropriate organic solvent system during fabrication. In this study, we report a series of novel fiber formulations comprising ethyl cellulose loaded with two hydrophobic drugs, spironolactone and nifedipine, either individually or in combination. The drugs are found to be present in the fibers in the form of amorphous solid dispersions, and these are stable at room temperature for 4 months. The products showed extended release profiles over more than 30 h. This formulation strategy offers potential to manage chronic cardiovascular conditions and overcome patient related non-adherence by providing a simplified treatment model.
Collapse
Affiliation(s)
- Lixiang Zhao
- UCL School of Pharmacy, University College London, 29-39 Brunswick Square, London WC1N 1AX, United Kingdom
| | - Mine Orlu
- UCL School of Pharmacy, University College London, 29-39 Brunswick Square, London WC1N 1AX, United Kingdom.
| | - Gareth R Williams
- UCL School of Pharmacy, University College London, 29-39 Brunswick Square, London WC1N 1AX, United Kingdom.
| |
Collapse
|
12
|
Feuser PE, Possato JC, Scussel R, Cercena R, de Araújo PHH, Machado-de-Ávila RA, Dal Bó AG. In vitro phototoxicity of zinc phthalocyanine (ZnPc) loaded in liposomes against human breast cancer cells. J PORPHYR PHTHALOCYA 2020. [DOI: 10.1142/s1088424621500073] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/10/2023]
Abstract
In this study, zinc phthalocyanine (ZnPc) was encapsulated in liposomes (Phosphatidylcholine (PC) from soybean lecithin (95% phosphatidylcholine, 5% lysophosphatidylcholine), and phosphatidic acid) obtained by a reverse-phase evaporation method. Liposomes were characterized and cytotoxicity and phototoxicity assays were performed using mouse embryo fibroblast (NIH3T3) and human breast cancer (MDAMB231), respectively. ZnPc was successfully encapsulated in liposomes ([Formula: see text]80%), presenting single populations with sizes of [Formula: see text]300 nm and negative zeta potential (-35 to -40 mV). The release profile at different pH presented a biphasic release controlled by the Fickian diffusion mechanism. The cytotoxicity assays carried out on NIH3T3 cells showed that the liposomes provided good protection for ZnPc, and did not affect the viability of non-cancerous cells. In contrast, free ZnPc significantly reduced non-cancerous cell viability at higher concentrations. ZnPc loaded in liposomes ensured a higher phototoxic effect on the MDAMB231 cells at all concentrations tested when exposed to low light dose.
Collapse
Affiliation(s)
- Paulo Emilio Feuser
- Department of Chemical Engineering and Food Engineering, Federal University of Santa Catarina, Florianópolis, Santa Catarina, Brazil
- Postgraduate Program in Health Science, University of the Extreme South Santa Catarina, Criciuma, Santa Catarina, Brazil
| | - Jonathann Corrêa Possato
- Postgraduate Program in Health Science, University of the Extreme South Santa Catarina, Criciuma, Santa Catarina, Brazil
| | - Rahisa Scussel
- Postgraduate Program in Health Science, University of the Extreme South Santa Catarina, Criciuma, Santa Catarina, Brazil
| | - Rodrigo Cercena
- Postgraduate Program in Materials Science and Engineering, University of the Extreme South Santa Catarina, Criciuma, Santa Catarina, Brazil
| | - Pedro Henrique Hermes de Araújo
- Department of Chemical Engineering and Food Engineering, Federal University of Santa Catarina, Florianópolis, Santa Catarina, Brazil
| | | | - Alexandre Gonçalves Dal Bó
- Postgraduate Program in Materials Science and Engineering, University of the Extreme South Santa Catarina, Criciuma, Santa Catarina, Brazil
| |
Collapse
|
13
|
Gençtürk A, Kahraman E, Güngör S, Özsoy Y, Saraç AS. Effects of Polyvinylpyrrolidone and Ethyl Cellulose in Polyurethane Electrospun Nanofibers on Morphology and Drug Release Characteristics. Turk J Pharm Sci 2020; 17:638-644. [PMID: 33389954 DOI: 10.4274/tjps.galenos.2019.87094] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/01/2022]
Abstract
Objectives Polyurethanes (PUs) are a popular choice for composing nanofibers due to their spinnability, biocompatibility, high chemical stability, and good mechanical and elasticity properties. The desired release behaviors are also achieved by using combinations of PUs and various polymers. In this study, we investigated effects of polyvinylpyrrolidone (PVP) and ethyl cellulose (EC) on PU electrospun nanofibers in terms of morphological structures and drug release characteristics. Materials and Methods Nanofibers were prepared using blends of PU with either EC or PVP in different ratios by electrospinning. The effects of PVP or EC on the morphology and diameter of the prepared nanofibers were examined with scanning electron microscope (SEM). The compatibility of the components used in the formulations of nanofibers was determined by attenuated total reflection (ATR)-fourier-transform infrared (FTIR). Donepezil hydrochloride (DNP), a water soluble compound, was selected as a model drug to examine its release characteristics from both PU/PVP and PU/EC electrospun nanofibers. In vitro drug release studies from electrospun nanofibers were performed according to the method defined in the monograph as the "paddle over disk method" of United States Pharmacopeia 38. Results The SEM images showed that addition of EC or PVP to PU solutions did not affect the generation of nanofibers, and those formed had a smooth surface without beads in nanoscale. The ATR-FTIR spectra disclosed that EC and PVP were separately incorporated into the PU matrix. The in vitro release data indicated that the presence of EC or PVP in PU nanofibers dramatically changed the release behavior of DNP. PU/EC nanofibers (F4) provided sustained drug release with the Korsmeyer-Peppas drug release kinetic mechanism, in which the release rate was controlled by diffusion of the drug, while all of the PU/PVP nanofibers exhibited fast drug release. Conclusion Overall, these characteristics of PU/EC (10/8) electrospun nanofibers has suggested their potential use as a drug carrier from which water-soluble drug release may occur in a sustained fashion.
Collapse
Affiliation(s)
- Aslı Gençtürk
- İstanbul Technical University Faculty of Science and Letters, Department of Polymer Science and Technology, İstanbul, Turkey
| | - Emine Kahraman
- İstanbul University Faculty of Pharmacy, Department of Pharmaceutical Technology, İstanbul, Turkey
| | - Sevgi Güngör
- İstanbul University Faculty of Pharmacy, Department of Pharmaceutical Technology, İstanbul, Turkey
| | - Yıldız Özsoy
- İstanbul University Faculty of Pharmacy, Department of Pharmaceutical Technology, İstanbul, Turkey
| | - A Sezai Saraç
- İstanbul Technical University Faculty of Science and Letters, Department of Polymer Science and Technology, İstanbul, Turkey.,İstanbul Technical University University Faculty of Science and Letters, Department of Nanoscience and Nanoengineering, İstanbul, Turkey
| |
Collapse
|
14
|
Wang Z, Cui W. Two Sides of Electrospun Fiber in Promoting and Inhibiting Biomedical Processes. ADVANCED THERAPEUTICS 2020. [DOI: 10.1002/adtp.202000096] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/26/2022]
Affiliation(s)
- Zhen Wang
- Shanghai Institute of Traumatology and Orthopaedics Shanghai Key Laboratory for Prevention and Treatment of Bone and Joint Diseases Ruijin Hospital Shanghai Jiao Tong University School of Medicine 197 Ruijin 2nd Road Shanghai 200025 P. R. China
| | - Wenguo Cui
- Shanghai Institute of Traumatology and Orthopaedics Shanghai Key Laboratory for Prevention and Treatment of Bone and Joint Diseases Ruijin Hospital Shanghai Jiao Tong University School of Medicine 197 Ruijin 2nd Road Shanghai 200025 P. R. China
| |
Collapse
|
15
|
Ahmadi P, Jahanban-Esfahlan A, Ahmadi A, Tabibiazar M, Mohammadifar M. Development of Ethyl Cellulose-based Formulations: A Perspective on the Novel Technical Methods. FOOD REVIEWS INTERNATIONAL 2020. [DOI: 10.1080/87559129.2020.1741007] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/20/2022]
Affiliation(s)
- Parisa Ahmadi
- Student Research Committee, Department of Food Science and Technology, Faculty of Nutrition and Food Science, Tabriz University of Medical Sciences, Tabriz, Iran
| | | | - Azam Ahmadi
- Student Research Committee, Department of Food Science and Technology, Faculty of Nutrition and Food Science, Tabriz University of Medical Sciences, Tabriz, Iran
| | - Mahnaz Tabibiazar
- Nutrition Research Center and Department of Food Science and Technology, Faculty of Nutrition and Food Science, Tabriz University of Medical Sciences, Tabriz, Iran
| | - Mohammadamin Mohammadifar
- Research Group for Food Production Engineering, National Food Institute, Technical University of Denmark, Lyngby, Denmark
| |
Collapse
|
16
|
Stoyanova N, Spasova M, Manolova N, Rashkov I, Georgieva A, Toshkova R. Antioxidant and Antitumor Activities of Novel Quercetin-Loaded Electrospun Cellulose Acetate/Polyethylene Glycol Fibrous Materials. Antioxidants (Basel) 2020; 9:antiox9030232. [PMID: 32168830 PMCID: PMC7139677 DOI: 10.3390/antiox9030232] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/24/2020] [Revised: 03/08/2020] [Accepted: 03/09/2020] [Indexed: 11/21/2022] Open
Abstract
The aim of present study was to obtain novel fibrous materials based on cellulose derivative and polyethylene glycol loaded with natural biologically active compound quercetin by electrospinning. Several methods including scanning electron microscopy (SEM), IR spectroscopy, X-ray diffraction analysis (XRD), water contact angle measurements, differential scanning calorimetry (DSC), and UV-VIS spectroscopy were utilized to characterize the obtained materials. The incorporation of polyethylene glycol in the fibrous material resulted in increased hydrophilicity and burst release of quercetin from the fibers. Quercetin-containing fibrous mats exhibited high antioxidant activity as estimated by DPPH free radical scavenging method. In vitro tests with HeLa tumor cells and SH-4 melanoma skin cells were performed in order to determine the cytotoxicity of the novel materials. It was found that the fibrous CA/PEG/QUE materials exhibited high cytotoxic effect against both cell lines. Therefore, the novel polymeric materials containing quercetin are promising candidates for biomedical and pharmaceutical applications.
Collapse
Affiliation(s)
- Nikoleta Stoyanova
- Laboratory of Bioactive Polymers, Institute of Polymers, Bulgarian Academy of Sciences, Acad. G. Bonchev St, bl. 103A, BG-1113 Sofia, Bulgaria; (N.S.); (N.M.)
| | - Mariya Spasova
- Laboratory of Bioactive Polymers, Institute of Polymers, Bulgarian Academy of Sciences, Acad. G. Bonchev St, bl. 103A, BG-1113 Sofia, Bulgaria; (N.S.); (N.M.)
- Correspondence: (M.S.); (I.R.); Fax: +359-02-870-0309 (M.S. & I.R.)
| | - Nevena Manolova
- Laboratory of Bioactive Polymers, Institute of Polymers, Bulgarian Academy of Sciences, Acad. G. Bonchev St, bl. 103A, BG-1113 Sofia, Bulgaria; (N.S.); (N.M.)
| | - Iliya Rashkov
- Laboratory of Bioactive Polymers, Institute of Polymers, Bulgarian Academy of Sciences, Acad. G. Bonchev St, bl. 103A, BG-1113 Sofia, Bulgaria; (N.S.); (N.M.)
- Correspondence: (M.S.); (I.R.); Fax: +359-02-870-0309 (M.S. & I.R.)
| | - Ani Georgieva
- Institute of Experimental Morphology, Pathology and Anthropology with Museum, Bulgarian Academy of Sciences, Acad. G. Bonchev St, bl. 25, BG-1113 Sofia, Bulgaria; (A.G.); (R.T.)
| | - Reneta Toshkova
- Institute of Experimental Morphology, Pathology and Anthropology with Museum, Bulgarian Academy of Sciences, Acad. G. Bonchev St, bl. 25, BG-1113 Sofia, Bulgaria; (A.G.); (R.T.)
| |
Collapse
|
17
|
Yu DG, Li JJ, Williams GR, Zhao M. Electrospun amorphous solid dispersions of poorly water-soluble drugs: A review. J Control Release 2018; 292:91-110. [PMID: 30118788 DOI: 10.1016/j.jconrel.2018.08.016] [Citation(s) in RCA: 164] [Impact Index Per Article: 27.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/15/2018] [Revised: 08/07/2018] [Accepted: 08/09/2018] [Indexed: 12/20/2022]
Abstract
The development of oral dosage forms for poorly water-soluble active pharmaceutical ingredients (APIs) is a persistent challenge. A range of methods has been explored to address this issue, and amorphous solid dispersions (ASDs) have received increasing attention. ASDs are typically prepared by starting with a liquid precursor (a solution or melt) and applying energy for solidification. Many techniques can be used, with the emergence of electrospinning as a potent option in recent years. This method uses electrical energy to induce changes from liquid to solid. Through the direct applications of electrical energy, electrospinning can generate nanofiber-based ASDs from drug-loaded solutions, melts and melt-solutions. The technique can also be combined with other approaches using the application of mechanical, thermal or other energy sources. Electrospinning has numerous advantages over other approaches to produce ASDs. These advantages include extremely rapid drying speeds, ease of implentation, compatibility with a wide range of active ingredients (including those which are thermally labile), and the generation of products with large surface areas and high porosity. Furthermore, this technique exhibits the potential to create so-called 'fifth-generation' ASDs with nanostructured architectures, such as core/shell or Janus systems and their combinations. These advanced systems can improve dissolution behaviour and provide programmable drug release profiles. Additionally, the fiber components and their spatial distributions can be precisely controlled. Electrospun fiber-based ASDs can maintain an incorporated active ingredient in the amorphous physical form for prolonged periods of time because of their homogeneous drug distribution within the polymer matrix (typically they comprise solid solutions), and ability to inhibit molecular motion. These ASDs can be utilised to generate oral dosage forms for poorly water-soluble drugs, resulting in linear or multiple-phase release of one or more APIs. Electrospun ASDs can also be exploited as templates for manipulating molecular self-assembly, offering a bridge between ASDs and other types of dosage forms. This review addresses the development, advantages and pharmaceutical applications of electrospinning for producing polymeric ASDs. Material preparation and analysis procedures are considered. The mechanisms through which performance has been improved are also discussed.
Collapse
Affiliation(s)
- Deng-Guang Yu
- School of Materials Science & Engineering, University of Shanghai for Science and Technology, 516 Jungong Road, Shanghai 200093, China
| | - Jiao-Jiao Li
- School of Materials Science & Engineering, University of Shanghai for Science and Technology, 516 Jungong Road, Shanghai 200093, China
| | - Gareth R Williams
- UCL School of Pharmacy, University College London, 29-39 Brunswick Square, London WC1N 1AX, UK
| | - Min Zhao
- School of Pharmacy, Queen's University Belfast, 97 Lisburn Road, Belfast BT9 7BL, UK.
| |
Collapse
|
18
|
Crosslinked Polyphosphazene Nanospheres with Anticancer Quercetin: Synthesis, Spectroscopic, Thermal Properties, and Controlled Drug Release. Macromol Res 2018. [DOI: 10.1007/s13233-018-6092-2] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022]
|
19
|
Liang K, Carmone S, Brambilla D, Leroux JC. 3D printing of a wearable personalized oral delivery device: A first-in-human study. SCIENCE ADVANCES 2018; 4:eaat2544. [PMID: 29750201 PMCID: PMC5942915 DOI: 10.1126/sciadv.aat2544] [Citation(s) in RCA: 109] [Impact Index Per Article: 18.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/08/2018] [Accepted: 03/26/2018] [Indexed: 05/27/2023]
Abstract
Despite the burgeoning interest in three-dimensional (3D) printing for the manufacture of customizable oral dosage formulations, a U.S. Food and Drug Administration-approved tablet notwithstanding, the full potential of 3D printing in pharmaceutical sciences has not been realized. In particular, 3D-printed drug-eluting devices offer the possibility for personalization in terms of shape, size, and architecture, but their clinical applications have remained relatively unexplored. We used 3D printing to manufacture a tailored oral drug delivery device with customizable design and tunable release rates in the form of a mouthguard and, subsequently, evaluated the performance of this system in the native setting in a first-in-human study. Our proof-of-concept work demonstrates the immense potential of 3D printing as a platform for the development and translation of next-generation drug delivery devices for personalized therapy.
Collapse
|
20
|
Yang GZ, Li HP, Yang JH, Wan J, Yu DG. Influence of Working Temperature on The Formation of Electrospun Polymer Nanofibers. NANOSCALE RESEARCH LETTERS 2017; 12:55. [PMID: 28105604 PMCID: PMC5247380 DOI: 10.1186/s11671-016-1824-8] [Citation(s) in RCA: 30] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/14/2016] [Accepted: 12/24/2016] [Indexed: 05/23/2023]
Abstract
Temperature is an important parameter during electrospinning, and virtually, all solution electrospinning processes are conducted at ambient temperature. Nanofiber diameters presumably decrease with the elevation of working fluid temperature. The present study investigated the influence of temperature variations on the formation of polymeric nanofibers during single-fluid electrospinning. The surface tension and viscosity of the fluid decreased with increasing working temperature, which led to the formation of high-quality nanofibers. However, the increase in temperature accelerated the evaporation of the solvent and thus terminated the drawing processes prematurely. A balance can be found between the positive and negative influences of temperature elevation. With polyacrylonitrile (PAN, with N,N-dimethylacetamide as the solvent) and polyvinylpyrrolidone (PVP, with ethanol as the solvent) as the polymeric models, relationships between the working temperature (T, K) and nanofiber diameter (D, nm) were established, with D = 12598.6 - 72.9T + 0.11T 2 (R = 0.9988) for PAN fibers and D = 107003.4 - 682.4T + 1.1T 2 (R = 0.9997) for PVP nanofibers. Given the fact that numerous polymers are sensitive to temperature and numerous functional ingredients exhibit temperature-dependent solubility, the present work serves as a valuable reference for creating novel functional nanoproducts by using the elevated temperature electrospinning process.
Collapse
Affiliation(s)
- Guang-Zhi Yang
- School of Materials Science & Engineering, University of Shanghai for Science and Technology, 516 Jungong Road, Yangpu District, Shanghai, 200093 People’s Republic of China
| | - Hai-Peng Li
- School of Materials Science & Engineering, University of Shanghai for Science and Technology, 516 Jungong Road, Yangpu District, Shanghai, 200093 People’s Republic of China
| | - Jun-He Yang
- School of Materials Science & Engineering, University of Shanghai for Science and Technology, 516 Jungong Road, Yangpu District, Shanghai, 200093 People’s Republic of China
| | - Jia Wan
- School of Materials Science & Engineering, University of Shanghai for Science and Technology, 516 Jungong Road, Yangpu District, Shanghai, 200093 People’s Republic of China
| | - Deng-Guang Yu
- School of Materials Science & Engineering, University of Shanghai for Science and Technology, 516 Jungong Road, Yangpu District, Shanghai, 200093 People’s Republic of China
| |
Collapse
|
21
|
Coaxial Electrospinning and Characterization of Core-Shell Structured Cellulose Nanocrystal Reinforced PMMA/PAN Composite Fibers. MATERIALS 2017; 10:ma10060572. [PMID: 28772933 PMCID: PMC5552079 DOI: 10.3390/ma10060572] [Citation(s) in RCA: 19] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/09/2017] [Revised: 05/08/2017] [Accepted: 05/17/2017] [Indexed: 11/30/2022]
Abstract
A modified coaxial electrospinning process was used to prepare composite nanofibrous mats from a poly(methyl methacrylate) (PMMA) solution with the addition of different cellulose nanocrystals (CNCs) as the sheath fluid and polyacrylonitrile (PAN) solution as the core fluid. This study investigated the conductivity of the as-spun solutions that increased significantly with increasing CNCs addition, which favors forming uniform fibers. This study discussed the effect of different CNCs addition on the morphology, thermal behavior, and the multilevel structure of the coaxial electrospun PMMA + CNCs/PAN composite nanofibers. A morphology analysis of the nanofibrous mats clearly demonstrated that the CNCs facilitated the production of the composite nanofibers with a core-shell structure. The diameter of the composite nanofibers decreased and the uniformity increased with increasing CNCs concentrations in the shell fluid. The composite nanofibrous mats had the maximum thermal decomposition temperature that was substantially higher than electrospun pure PMMA, PAN, as well as the core-shell PMMA/PAN nanocomposite. The BET (Brunauer, Emmett and Teller) formula results showed that the specific surface area of the CNCs reinforced core-shell composite significantly increased with increasing CNCs content. The specific surface area of the composite with 20% CNCs loading rose to 9.62 m2/g from 3.76 m2/g for the control. A dense porous structure was formed on the surface of the electrospun core-shell fibers.
Collapse
|
22
|
Yang GZ, Li JJ, Yu DG, He MF, Yang JH, Williams GR. Nanosized sustained-release drug depots fabricated using modified tri-axial electrospinning. Acta Biomater 2017; 53:233-241. [PMID: 28137657 DOI: 10.1016/j.actbio.2017.01.069] [Citation(s) in RCA: 65] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/09/2016] [Revised: 01/18/2017] [Accepted: 01/25/2017] [Indexed: 11/15/2022]
Abstract
Nanoscale drug depots, comprising a drug reservoir surrounded by a carrier membrane, are much sought after in contemporary pharmaceutical research. Using cellulose acetate (CA) as a filament-forming polymeric matrix and ferulic acid (FA) as a model drug, nanoscale drug depots in the form of core-shell fibers were designed and fabricated using a modified tri-axial electrospinning process. This employed a solvent mixture as the outer working fluid, as a result of which a robust and continuous preparation process could be achieved. The fiber-based depots had a linear morphology, smooth surfaces, and an average diameter of 0.62±0.07μm. Electron microscopy data showed them to have clear core-shell structures, with the FA encapsulated inside a CA shell. X-ray diffraction and IR spectroscopy results verified that FA was present in the crystalline physical form. In vitro dissolution tests revealed that the fibers were able to provide close to zero-order release over 36h, with no initial burst release and minimal tailing-off. The release properties of the depot systems were much improved over monolithic CA/FA fibers, which exhibited a significant burst release and also considerable tailing-off at the end of the release experiment. Here we thus demonstrate the concept of using modified tri-axial electrospinning to design and develop new types of heterogeneous nanoscale biomaterials. STATEMENT OF SIGNIFICANCE Nanoscale drug depots with a drug reservoir surrounded by a carrier are highly attractive in biomedicine. A cellulose acetate based drug depot was investigated in detail, starting with the design of the nanostructure, and moving through its fabrication using a modified tri-axial electrospinning process and a series of characterizations. The core-shell fiber-based drug depots can provide a more sustained release profile with no initial burst effect and less tailing-off than equivalent monolithic drug-loaded fibers. The drug release mechanisms are also distinct in the two systems. This proof-of-concept work can be further expanded to conceive a series of new structural biomaterials with improved or new functional performance.
Collapse
Affiliation(s)
- Guang-Zhi Yang
- School of Materials Science & Engineering, University of Shanghai for Science and Technology, 516 Jungong Road, Shanghai 200093, China
| | - Jiao-Jiao Li
- School of Materials Science & Engineering, University of Shanghai for Science and Technology, 516 Jungong Road, Shanghai 200093, China
| | - Deng-Guang Yu
- School of Materials Science & Engineering, University of Shanghai for Science and Technology, 516 Jungong Road, Shanghai 200093, China.
| | - Mei-Feng He
- School of Materials Science & Engineering, University of Shanghai for Science and Technology, 516 Jungong Road, Shanghai 200093, China
| | - Jun-He Yang
- School of Materials Science & Engineering, University of Shanghai for Science and Technology, 516 Jungong Road, Shanghai 200093, China
| | - Gareth R Williams
- UCL School of Pharmacy, University College London, 29-39 Brunswick Square, London WC1N 1AX, UK.
| |
Collapse
|
23
|
Feuser PE, Arévalo JMC, Junior EL, Rossi GR, da Silva Trindade E, Rocha MEM, Jacques AV, Ricci-Júnior E, Santos-Silva MC, Sayer C, de Araújo PHH. Increased cellular uptake of lauryl gallate loaded in superparamagnetic poly(methyl methacrylate) nanoparticles due to surface modification with folic acid. JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2016; 27:185. [PMID: 27787810 DOI: 10.1007/s10856-016-5796-0] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/20/2016] [Accepted: 10/13/2016] [Indexed: 06/06/2023]
Abstract
Lauryl gallate loaded in superparamagnetic poly(methyl methacrylate) nanoparticles surface modified with folic acid were synthesized by miniemulsion polymerization in just one step. In vitro biocompatibility and cytotoxicity assays on L929 (murine fibroblast), human red blood, and HeLa (uterine colon cancer) cells were performed. The effect of folic acid at the nanoparticles surface was evaluated through cellular uptake assays in HeLa cells. Results showed that the presence of folic acid did not affect substantially the polymer particle size (~120 nm), the superparamagnetic behavior, the encapsulation efficiency of lauryl gallate (~87 %), the Zeta potential (~38 mV) of the polymeric nanoparticles or the release profile of lauryl gallate. The release profile of lauryl gallate from superparamagnetic poly(methyl methacrylate) nanoparticles presented an initial burst effect (0-1 h) followed by a slow and sustained release, indicating a biphasic release system. Lauryl gallate loaded in superparamagnetic poly(methyl methacrylate) nanoparticles with folic acid did not present cytotoxicity effects on L929 and human red blood cells. However, free lauryl gallate presented significant cytotoxic effects on L929 and human red blood cells at all tested concentrations. The presence of folic acid increased the cytotoxicity of lauryl gallate loaded in nanoparticles on HeLa cells due to a higher cellular uptake when HeLa cells were incubated at 37 °C. On the other hand, when the nanoparticles were incubated at low temperature (4 °C) cellular uptake was not observed, suggesting that the uptake occurred by folate receptor mediated energy-dependent endocytosis. Based on presented results our work suggests that this carrier system can be an excellent alternative in targeted drug delivery by folate receptor.
Collapse
Affiliation(s)
- Paulo Emilio Feuser
- Department of Chemical Engineering and Food Engineering, Federal University of Santa Catarina, Florianópolis, Brazil
| | | | - Enio Lima Junior
- Laboratório de Resonancias Magnéticas, Centro Atómico Bariloche & CONICET, San Carlos de Bariloche, Argentina
| | | | | | | | - Amanda Virtuoso Jacques
- Department of Clinical Analyses, Federal University of Santa Catarina, Florianópolis, Brazil
| | - Eduardo Ricci-Júnior
- Department of Pharmacy, Federal University of Rio Janeiro, Rio de Janeiro, Brazil
| | | | - Claudia Sayer
- Department of Chemical Engineering and Food Engineering, Federal University of Santa Catarina, Florianópolis, Brazil
| | - Pedro H Hermes de Araújo
- Department of Chemical Engineering and Food Engineering, Federal University of Santa Catarina, Florianópolis, Brazil.
| |
Collapse
|
24
|
Jin M, Yu DG, Geraldes CFGC, Williams GR, Bligh SWA. Theranostic Fibers for Simultaneous Imaging and Drug Delivery. Mol Pharm 2016; 13:2457-65. [DOI: 10.1021/acs.molpharmaceut.6b00197] [Citation(s) in RCA: 35] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/13/2023]
Affiliation(s)
- Miao Jin
- UCL
School of Pharmacy, University College London, 29-39 Brunswick Square, London WC1N 1AX, U.K
| | - Deng-Guang Yu
- School of Materials Science & Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China
| | - Carlos F. G. C. Geraldes
- Department
of Life Sciences and Coimbra Chemistry Center - CQC, Faculty of Science
and Technology, University of Coimbra, 3000-393 Coimbra, Portugal
| | - Gareth R. Williams
- UCL
School of Pharmacy, University College London, 29-39 Brunswick Square, London WC1N 1AX, U.K
| | - S. W. Annie Bligh
- Department
of Life Sciences, Faculty of Science and Technology, University of Westminster, 115 New Cavendish Street, London W1W 6UW, U.K
| |
Collapse
|
25
|
Repanas A, Andriopoulou S, Glasmacher B. The significance of electrospinning as a method to create fibrous scaffolds for biomedical engineering and drug delivery applications. J Drug Deliv Sci Technol 2016. [DOI: 10.1016/j.jddst.2015.12.007] [Citation(s) in RCA: 67] [Impact Index Per Article: 8.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
|
26
|
Xia J, Zhang G, Deng L, Yang H, Sun R, Wong CP. Flexible and enhanced thermal conductivity of a Al2O3@polyimide hybrid film via coaxial electrospinning. RSC Adv 2015. [DOI: 10.1039/c5ra00718f] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
A core–shell Al2O3@PI fiber was prepared by coaxial electrospinning, which showed excellent properties of flexibility and in plane thermal conductivity.
Collapse
Affiliation(s)
- Jianwen Xia
- Shenzhen College of Advanced Technology
- University of Chinese Academy of Sciences
- Shenzhen 518055
- China
- College of Materials Science and Engineering
| | - Guoping Zhang
- Shenzhen College of Advanced Technology
- University of Chinese Academy of Sciences
- Shenzhen 518055
- China
- School of Materials Science and Engineering
| | - Libo Deng
- Shenzhen College of Advanced Technology
- University of Chinese Academy of Sciences
- Shenzhen 518055
- China
| | - Haipeng Yang
- College of Materials Science and Engineering
- Shenzhen University
- Shenzhen
- China
| | - Rong Sun
- Shenzhen College of Advanced Technology
- University of Chinese Academy of Sciences
- Shenzhen 518055
- China
| | - Ching-Ping Wong
- Shenzhen College of Advanced Technology
- University of Chinese Academy of Sciences
- Shenzhen 518055
- China
- School of Materials Science and Engineering
| |
Collapse
|
27
|
Yosefifard M, Hassanpour-Ezatti M. Epidural administration of neostigmine-loaded nanofibers provides extended analgesia in rats. ACTA ACUST UNITED AC 2014; 22:73. [PMID: 25403313 PMCID: PMC4243326 DOI: 10.1186/s40199-014-0073-6] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/01/2014] [Accepted: 11/01/2014] [Indexed: 12/26/2022]
Abstract
Background In this study, neostigmine-loaded electrospun nanofibers were prepared and then their efficacy and duration of analgesic action were studied after epidural administration in rats by repeated tail flick and formalin tests. Methods The neostigmine poly vinyl alcohol (PVA) nanofibers were fabricated by electrospinning methods. The nanofibers (1 mg) were injected into the lumbar epidural space (L5-L6) of rats (n = 6). Cerebrospinal fluid samples of rats were collected 1, 5 and 24 hours after injection and then were sampled once weekly for 4 weeks. Free-neostigmine concentration was measured in the samples spectrophotometrically. Rat nociceptive responses were evaluated by repeated tail-flick and formalin tests for 5 weeks after the nanofibers (1 mg) injection. Locomotor activity of rats was measured in the open-field at the same period. Results The cerebrospinal fluid concentration of free neostigmine reached 5 μg/ml five hours after injection and remained constant until the end of the experiments. The tail-flick latency of treated rats was significantly (p < 0.01) increased and remained constant up to 4 weeks. Pain scores of the rats in both phases of formalin test were significantly (p < 0.01) reduced during the same periods, Epidural injection of the nanofibers had no effect on locomotor activity of rats in an open-field. Conclusions Our results indicate that the neostigmine nanofibers can provide sustained release of neostigmine for induction of prolonged analgesia after epidural administration. High tissue distribution and penetration of the nanofibers in dorsal horn can increase thermal and chemical analgesia duration without altering locomotor activity in rats for 4 weeks.
Collapse
|
28
|
Abstract
The present study report two types of ultra-thin shellac fibers that were fabricated using a traditional single fluid electrospinning and a modified coaxial electrospinning. Ethanol was exploited as the solvent of shellac and also a sheath fluid of the coaxial process. A camera was used to observe the electrospinning processes and scanning electron microscope was taken to investigate the prepared shellac nanofibers. A single fluid electrospinning of 64% (w/v) shellac solutions not only clogged the spinneret now and then, but also resulted in fibers with a spindles-on-a-string morphology under a flow rate of 1.0 mL/h and an applied voltage of 12 kV. In sharp contrary, a coaxial electrospinning of 80% (w/v) shellac solutions (under a sheath and core flow rate of 0.2 and 0.8 mL/h, respectively, and an applied voltage of 12 kV) furnished linear nanofibers with an average diameter of 740 ± 60 nm. With the same outflows from the nozzles of spinneret, the ultrathine nanofibers from the modified coaxial process surpassed those from the single fluid process in terms of fibers’ morphology and size. The modified coaxial process described here expands the capability of electrospinning process and opens a new way to obtain thinner nanofibers with fine structural uniformity.
Collapse
|
29
|
Yan J, Wu YH, Yu DG, Williams GR, Huang SM, Tao W, Sun JY. Electrospun acid–base pair solid dispersions of quercetin. RSC Adv 2014. [DOI: 10.1039/c4ra10221e] [Citation(s) in RCA: 23] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
An electrospun acid–base pair solid dispersion in the form of core–shell nanofibers was developed for improving the dissolution of quercetin.
Collapse
Affiliation(s)
- Jie Yan
- Research Center for Analysis and Measurement
- Donghua University
- Shanghai 201620, China
| | - Yong-Hui Wu
- The Department of Mechanical Engineering
- Guangxi Technological College of Machinery and Electricity
- Nanning 530007, China
| | - Deng-Guang Yu
- School of Materials Science & Engineering
- University of Shanghai for Science and Technology
- Shanghai 200093, China
| | | | - Shang-Meng Huang
- The Department of Mechanical Engineering
- Guangxi Technological College of Machinery and Electricity
- Nanning 530007, China
| | - Wen Tao
- School of Materials Science & Engineering
- University of Shanghai for Science and Technology
- Shanghai 200093, China
| | - Jun-Yi Sun
- School of Materials Science & Engineering
- University of Shanghai for Science and Technology
- Shanghai 200093, China
| |
Collapse
|