Enhancing cellulase and hemicellulase production by genetic modification of the carbon catabolite repressor gene, creA, in Acremonium cellulolyticus

In vivo assembly of genetic constructs in filamentous fungus Talaromyces cellulolyticus

In the filamentous fungus Talaromyces cellulolyticus, similar to other filamentous fungi, non-homologous recombination predominates over homologous recombination. For instance, to achieve an acceptable integration frequency of a genetic construct into a target site on the intact chromosome, the flanking sequences directing this integration should be approximately 2.5 kb in length. However, despite the requirement of long flanks for integration into the intact chromosome, we found that homologous recombination between linear DNA fragments in T. cellulolyticus effectively occurs when these fragments overlap by just 50 bp. This allows for the assembly of full-sized genetic constructs in vivo from relatively small blocks, eliminating the need for in vitro assembly, similar to the approach previously developed for the yeast Saccharomyces cerevisiae. To validate this possibility, we replaced the native promoter of the target gene by transforming the recipient strain with five DNA fragments: two flanks for recombination with the target locus, two parts of the marker gene, and a donor promoter. This discovery significantly expedites the genetic engineering of T. cellulolyticus and potentially other fungi.

Integrating 1G with 2G Bioethanol Production by Using Distillers’ Dried Grains with Solubles (DDGS) as the Feedstock for Lignocellulolytic Enzyme Production

First-generation (1G) bioethanol is one of the most used liquid biofuels in the transport industry. It is generated by using sugar- or starch-based feedstocks, while second-generation (2G) bioethanol is generated by using lignocellulosic feedstocks. Distillers’ dried grains with solubles (DDGS) is a byproduct of first-generation bioethanol production with a current annual production of 22.6 million tons in the USA. DDGS is rich in fiber and valuable nutrients contents, which can be used to produce lignocellulolytic enzymes such as cellulases and hemicellulases for 2G bioethanol production. However, DDGS needs a pretreatment method such as dilute acid, ammonia soaking, or steam hydrolysis to release monosaccharides and short-length oligosaccharides as fermentable sugars for use in microbial media. These fermentable sugars can then induce microbial growth and enzyme production compared to only glucose or xylose in the media. In addition, selection of one or more suitable microbial strains, which work best with the DDGS for enzyme production, is also needed. Media optimization and fermentation process optimization strategies can then be applied to find the optimum conditions for the production of cellulases and hemicellulases needed for 2G bioethanol production. Therefore, in this review, a summary of all such techniques is compiled with a special focus on recent findings obtained in previous pieces of research conducted by the authors and by others in the literature. Furthermore, a comparison of such techniques applied to other feedstocks and process improvement strategies is also provided. Overall, dilute acid pretreatment is proven to be better than other pretreatment methods, and fermentation optimization strategies can enhance enzyme production by considerable folds with a suitable feedstock such as DDGS. Future studies can be further enhanced by the technoeconomic viability of DDGS as the on-site enzyme feedstock for the manufacture of second-generation bioethanol (2G) in first-generation (1G) ethanol plants, thus bridging the two processes for the efficient production of bioethanol using corn or other starch-based lignocellulosic plants.

Strategies to enhance enzymatic hydrolysis of lignocellulosic biomass for biorefinery applications: A review

Global interest in lignocellulosic biorefineries has increased in the recent past due to technological advancements in sustainable and cost-effective production of numerous commodity and speciality chemicals and fuels from renewable lignocellulosic biomass (LCB). As a result, the market value of biorefinery products has also increased over the time, with an estimated worth of USD 867.7 billion by 2025. However, biorefinery operations, especially enzymatic hydrolysis, suffer from many challenges that limits the cost-effectiveness of conversion of LCB. Therefore, it is essential to understand and address these challenges in future biorefineries. The paper focuses on recent trends and challenges in enzymatic hydrolysis of LCB during lignocellulosic biorefinery operation for greener synthesis of energy, fuels, chemicals and other high-value products. Insights into the gaps in knowledge and technological challenges have also been addressed together with focus on future research needs and perspectives of enzymatic hydrolysis of LCB for biorefinery applications.

Identification of the Talaromyces cellulolyticus Gene Encoding an Extracellular Enzyme with β-galactosidase Activity and Testing it as a Reporter for Gene Expression Assays

The filamentous fungus Talaromyces cellulolyticus (formerly Acremonium cellulolyticus) is currently being intensively studied as a promising industrial producer of a number of secreted cellulolytic enzymes. In this study, the T. cellulolyticus gene lacA, which encodes a protein orthologous to the fungal extracellular β-galactosidases of family 35, was identified. The substitution of the lacA upstream region with a constitutive promoter demonstrated that the product of this gene is effectively secreted and possesses β-galactosidase activity. The optimal pH and temperature values for the hydrolysis of o-nitrophenyl-β-D-galactopyranoside by this enzyme were determined to be pH 4.5-5.5 and 50 °C, respectively. The negligible production of β-galactosidase activity by strains expressing lacA under native regulation raises the possibility of using lacA as a reporter gene. To test this hypothesis, the native promoter of lacA was replaced with the strong inducible promoter of the T. cellulolyticus cellobiohydrolase I gene. The cultivation of the resulting strain in various media showed that the β-galactosidase activity depends on cultivation conditions similar to the cellobiohydrolase activity. Thus, the suitability of lacA as a reporter for evaluating promoters with a wide range of expression profiles was demonstrated.

The signaling pathways involved in metabolic regulation and stress responses of the yeast-like fungi Aureobasidium spp

Aureobasidium spp. can use a wide range of substrates and are widely distributed in different environments, suggesting that they can sense and response to various extracellular signals and be adapted to different environments. It is true that their pullulan, lipid and liamocin biosynthesis and cell growth are regulated by the cAMP-PKA signaling pathway; Polymalate (PMA) and pullulan biosynthesis is controlled by the Ca²⁺ and TORC1 signaling pathways; the HOG1 signaling pathway determines high osmotic tolerance and high pullulan and liamocin biosynthesis; the Snf1/Mig1 pathway controls glucose repression on pullulan and liamocin biosynthesis; DHN-melanin biosynthesis and stress resistance are regulated by the CWI signaling pathway and TORC1 signaling pathway. In addition, the HSF1 pathway may control cell growth of some novel strains of A. melanogenum at 37 °C. However, the detailed molecular mechanisms of high temperature growth and thermotolerance of some novel strains of A. melanogenum and glucose derepression in A. melanogenum TN3-1 are still unclear.

The Transcription Factor Gene tclB2 Regulates Mannanolytic Enzyme Production in the Fungus Talaromyces cellulolyticus

The filamentous fungus Talaromyces cellulolyticus is a well-characterized cellulolytic and hemicellulolytic enzyme producer. In this study, the function of the tclB2 gene, which is a homolog of the manR/clrB/clr-2 gene in other filamentous fungi, in mannanolytic enzyme production by T. cellulolyticus was investigated. When a tclB2-disrupted strain (YDTclB) was grown in the presence of glucomannan, the production of β-mannanase, β-mannosidase, and α-galactosidase was decreased at the protein and transcriptional levels when compared to the control strain. In addition, a tclB2-overexpressing strain (YHTclB) showed higher β-mannanase and β-mannosidase production. When cellulose was used as a carbon source, the expression of genes encoding mannanolytic enzymes also decreased in YDTclB. These results suggested that TclB2 contributes to mannanolytic enzyme production in T. cellulolyticus. This work is the first study to identify a transcriptional regulator of mannanolytic enzyme genes in T. cellulolyticus.

Addressing challenges in production of cellulases for biomass hydrolysis: Targeted interventions into the genetics of cellulase producing fungi

Lignocellulosic materials are the favoured feedstock for biorefineries due to their abundant availability and non-completion with food. Biobased technologies for refining these materials are limited mainly by the cost of biomass hydrolyzing enzymes, typically sourced from filamentous fungi. Therefore, considerable efforts have been directed at improving the quantity and quality of secreted lignocellulose degrading enzymes from fungi in order to attain overall economic viability. Process improvements and media engineering probably have reached their thresholds and further production enhancements require modifying the fungal metabolism to improve production and secretion of these enzymes. This review focusses on the types and mechanisms of action of known fungal biomass degrading enzymes, our current understanding of the genetic control exerted on their expression, and possible routes for intervention, especially on modulating catabolite repression, transcriptional regulators, signal transduction, secretion pathways etc., in order to improve enzyme productivity, activity and stability.

Design of novel enzyme biocatalysts for industrial bioprocess: Harnessing the power of protein engineering, high throughput screening and synthetic biology

Biocatalysts have wider applications in various industries. Biocatalysts are generating bigger attention among researchers due to their unique catalytic properties like activity, specificity and stability. However the industrial use of many enzymes is hindered by low catalytic efficiency and stability during industrial processes. Properties of enzymes can be altered by protein engineering. Protein engineers are increasingly study the structure-function characteristics, engineering attributes, design of computational tools for enzyme engineering, and functional screening processes to improve the design and applications of enzymes. The potent and innovative techniques of enzyme engineering deliver outstanding opportunities for tailoring industrially important enzymes for the versatile production of biochemicals. An overview of the current trends in enzyme engineering is explored with important representative examples.

Ideal Feedstock and Fermentation Process Improvements for the Production of Lignocellulolytic Enzymes

The usage of lignocellulosic biomass in energy production for biofuels and other value-added products can extensively decrease the carbon footprint of current and future energy sectors. However, the infrastructure in the processing of lignocellulosic biomass is not well-established as compared to the fossil fuel industry. One of the bottlenecks is the production of the lignocellulolytic enzymes. These enzymes are produced by different fungal and bacterial species for degradation of the lignocellulosic biomass into its reactive fibers, which can then be converted to biofuel. The selection of an ideal feedstock for the lignocellulolytic enzyme production is one of the most studied aspects of lignocellulolytic enzyme production. Similarly, the fermentation enhancement strategies for different fermentation variables and modes are also the focuses of researchers. The implementation of fermentation enhancement strategies such as optimization of culture parameters (pH, temperature, agitation, incubation time, etc.) and the media nutrient amendment can increase the lignocellulolytic enzyme production significantly. Therefore, this review paper summarized these strategies and feedstock characteristics required for hydrolytic enzyme production with a special focus on the characteristics of an ideal feedstock to be utilized for the production of such enzymes on industrial scales.

Molecular engineering to improve lignocellulosic biomass based applications using filamentous fungi

Lignocellulosic biomass is an abundant and renewable resource, and its utilization has become the focus of research and biotechnology applications as a very promising raw material for the production of value-added compounds. Filamentous fungi play an important role in the production of various lignocellulolytic enzymes, while some of them have also been used for the production of important metabolites. However, wild type strains have limited efficiency in enzyme production or metabolic conversion, and therefore many efforts have been made to engineer improved strains. Examples of this are the manipulation of transcriptional regulators and/or promoters of enzyme-encoding genes to increase gene expression, and protein engineering to improve the biochemical characteristics of specific enzymes. This review provides and overview of the applications of filamentous fungi in lignocellulosic biomass based processes and the development and current status of various molecular engineering strategies to improve these processes.

Comparative Analysis of Structural Variations Due to Genome Shuffling of Bacillus Subtilis VS15 for Improved Cellulase Production

Cellulose is one of the most abundant and renewable biomass products used for the production of bioethanol. Cellulose can be efficiently hydrolyzed by Bacillus subtilis VS15, a strain isolate obtained from decomposing logs. A genome shuffling approach was implemented to improve the cellulase activity of Bacillus subtilis VS15. Mutant strains were created using ethyl methyl sulfonate (EMS), N-Methyl-N′ nitro-N-nitrosoguanidine (NTG), and ultraviolet light (UV) followed by recursive protoplast fusion. After two rounds of shuffling, the mutants Gb2, Gc8, and Gd7 were produced that had an increase in cellulase activity of 128%, 148%, and 167%, respectively, in comparison to the wild type VS15. The genetic diversity of the shuffled strain Gd7 and wild type VS15 was compared at whole genome level. Genomic-level comparisons identified a set of eight genes, consisting of cellulase and regulatory genes, of interest for further analyses. Various genes were identified with insertions and deletions that may be involved in improved celluase production in Gd7. Strain Gd7 maintained the capability of hydrolyzing wheatbran to glucose and converting glucose to ethanol by fermentation with Saccharomyces cerevisiae of the wild type VS17. This ability was further confirmed by the acidified potassium dichromate (K₂Cr₂O₇) method.

Efficient Conversion of Cane Molasses into Fructooligosaccharides by a Glucose Derepression Mutant of Aureobasidium melanogenum with High β-Fructofuranosidase Activity

Fructooligosaccharides (FOSs) are excellent food ingredients or feed additives by stimulating probiotics. In this paper, a CREA gene encoding a glucose repressor in the β-fructofuranosidase producer Aureobasidium melanogenum 33 with high-level FOS biosynthesis was disrupted, and glucose repression in disruptant D28 was relieved. The disruptant D28 produced up to 2100 U/mL of β-fructofuranosidase activity, whereas the enzyme activities produced by parent strain 33 and complemented strain C11 were below 600 U/mL. The whole cells of the disruptant D28 was used to convert cane molasses into FOSs, and 0.58 g of FOSs/g of molasses sugar was synthesized from 350 g/L cane molasses sugar within 4 h. Results demonstrated that the industrial waste cane molasses can be efficiently converted into FOSs by the glucose derepression mutant D28 with high β-fructofuranosidase activity. This low-cost and environmentally friendly bioprocess has great potential applications in bioengineering and biotechnology for FOS production.

The Putative Transcription Factor Gene thaB Regulates Cellulase and Xylanase Production at the Enzymatic and Transcriptional Level in the Fungus Talaromyces cellulolyticus

Talaromyces cellulolyticus is a promising strain for industrial cellulase production. In this study, the thaB gene, which is a homologue of the hap2/B gene in other filamentous fungi, was isolated and characterized. When grown in the presence of cellulose, culture supernatants of a thaB-disrupted strain (YDTha) exhibited decreased cellulase and xylanase enzymatic activities compared to the control strain. Furthermore, YDTha exhibited lower expression of the genes encoding cellulases and xylanases compared to the control strain. When cellobiose and lactose (soluble carbon sources) were used as carbon sources, the expression of the genes encoding cellulases and xylanases was decreased in both the YDTha and the control strains, though the expression levels in YDTha remained lower than those in the control strain. These results suggested that thaB has a positive role in cellulase and xylanase production in T. cellulolyticus.

GH30-7 Endoxylanase C from the Filamentous Fungus Talaromyces cellulolyticus

Glycoside hydrolase family 30 subfamily 7 (GH30-7) enzymes include various types of xylanases, such as glucuronoxylanase, endoxylanase, xylobiohydrolase, and reducing-end xylose-releasing exoxylanase. Here, we characterized the mode of action and gene expression of the GH30-7 endoxylanase from the cellulolytic fungus Talaromyces cellulolyticus (TcXyn30C). TcXyn30C has a modular structure consisting of a GH30-7 catalytic domain and a C-terminal cellulose binding module 1, whose cellulose-binding ability has been confirmed. Sequence alignment of GH30-7 xylanases exhibited that TcXyn30C has a conserved Phe residue at the position corresponding to a conserved Arg residue in GH30-7 glucuronoxylanases, which is required for the recognition of the 4-O-methyl-α-d-glucuronic acid (MeGlcA) substituent. TcXyn30C degraded both glucuronoxylan and arabinoxylan with similar kinetic constants and mainly produced linear xylooligosaccharides (XOSs) with 2 to 3 degrees of polymerization, in an endo manner. Notably, the hydrolysis of glucuronoxylan caused an accumulation of 2²-(MeGlcA)-xylobiose (U^4m2X). The production of this acidic XOS is likely to proceed via multistep reactions by putative glucuronoxylanase activity that produces 2²-(MeGlcA)-XOSs (X _n U^4m2X, n ≥ 0) in the initial stages of the hydrolysis and by specific release of U^4m2X from a mixture containing X _n U^4m2X. Our results suggest that the unique endoxylanase activity of TcXyn30C may be applicable to the production of linear and acidic XOSs. The gene xyn30C was located adjacent to the putative GH62 arabinofuranosidase gene (abf62C) in the T. cellulolyticus genome. The expression of both genes was induced by cellulose. The results suggest that TcXyn30C may be involved in xylan removal in the hydrolysis of lignocellulose by the T. cellulolyticus cellulolytic system.IMPORTANCE Xylooligosaccharides (XOSs), which are composed of xylose units with a β-1,4 linkage, have recently gained interest as prebiotics in the food and feed industry. Apart from linear XOSs, branched XOSs decorated with a substituent such as methyl glucuronic acid and arabinose also have potential applications. Endoxylanase is a promising tool in producing XOSs from xylan. The structural variety of XOSs generated depends on the substrate specificity of the enzyme as well as the distribution of the substituents in xylan. Thus, the exploration of endoxylanases with novel specificities is expected to be useful in the provision of a series of XOSs. In this study, the endoxylanase TcXyn30C from Talaromyces cellulolyticus was characterized as a unique glycoside hydrolase belonging to the family GH30-7, which specifically releases 2²-(4-O-methyl-α-d-glucuronosyl)-xylobiose from hardwood xylan. This study provides new insights into the production of linear and branched XOSs by GH30-7 endoxylanase.

Deletion of the middle region of the transcription factor ClrB in Penicillium oxalicum enables cellulase production in the presence of glucose

Enzymes that degrade lignocellulose to simple sugars are of great interest in research and for biotechnology because of their role in converting plant biomass to fuels and chemicals. The synthesis of cellulolytic enzymes in filamentous fungi is tightly regulated at the transcriptional level, with the transcriptional activator ClrB/CLR-2 playing a critical role in many species. In Penicillium oxalicum, clrB overexpression could not relieve the dependence of cellulase expression on cellulose as an inducer, suggesting that clrB is controlled post-transcriptionally. In this study, using a reporter gene system in yeast, we identified the C-terminal region of ClrB/CLR-2 as a transcriptional activation domain. Expression of clrB^ID , encoding a ClrB derivative in which the DNA-binding and transcriptional activation domains are fused together to remove the middle region, led to cellulase production in the absence of cellulose in P. oxalicum Strikingly, the clrB^ID -expressing strain produced cellulase on carbon sources that normally repress cellulase expression, including glucose and glycerol. Results from deletion of the carbon catabolite repressor gene creA in the clrB^ID -expressing strain suggested that the effect of clrB^ID is independent of CreA's repressive function. A similar modification of clrB in Aspergillus niger resulted in the production of a mannanase in glucose medium. Taken together, these results indicate that ClrB suppression under noninducing conditions involves its middle region, suggesting a potential strategy to engineer fungal strains for improved cellulase production on commonly used carbon sources.

Designing cellulolytic enzyme systems for biorefinery: From nature to application

Cellulolytic enzymes play a key role on conversion of lignocellulosic plant biomass to biofuels and biochemicals in sugar platform biorefineries. In this review, we survey composite carbohydrate-active enzymes (CAZymes) among groups of cellulolytic fungi and bacteria that exist under aerobic and anaerobic conditions. Recent advances in designing effective cellulase mixtures are described, starting from the most complex microbial consortium-based enzyme preparations, to single-origin enzymes derived from intensively studied cellulase producers such as Trichoderma reesei, Talaromyces cellulolyticus, and Penicellium funiculosum, and the simplest minimal enzyme systems comprising selected sets of mono-component enzymes tailor-made for specific lignocellulosic substrates. We provide a comprehensive update on studies in developing high-performance cellulases for biorefineries.

Modulating Transcriptional Regulation of Plant Biomass Degrading Enzyme Networks for Rational Design of Industrial Fungal Strains

Filamentous fungi are the most important microorganisms for the industrial production of plant polysaccharide degrading enzymes due to their unique ability to secrete these proteins efficiently. These carbohydrate active enzymes (CAZymes) are utilized industrially for the hydrolysis of plant biomass for the subsequent production of biofuels and high-value biochemicals. The expression of the genes encoding plant biomass degrading enzymes is tightly controlled. Naturally, large amounts of CAZymes are produced and secreted only in the presence of the plant polysaccharide they specifically act on. The signal to produce is conveyed via so-called inducer molecules which are di- or mono-saccharides (or derivatives thereof) released from the specific plant polysaccharides. The presence of the inducer results in the activation of a substrate-specific transcription factor (TF), which is required not only for the controlled expression of the genes encoding the CAZymes, but often also for the regulation of the expression of the genes encoding sugar transporters and catabolic pathway enzymes needed to utilize the released monosaccharide. Over the years, several substrate-specific TFs involved in the degradation of cellulose, hemicellulose, pectin, starch and inulin have been identified in several fungal species and systems biology approaches have made it possible to uncover the enzyme networks controlled by these TFs. The requirement for specific inducers for TF activation and subsequently the expression of particular enzyme networks determines the choice of feedstock to produce enzyme cocktails for industrial use. It also results in batch-to-batch variation in the composition and amounts of enzymes due to variations in sugar composition and polysaccharide decorations of the feedstock which hampers the use of cheap feedstocks for constant quality of enzyme cocktails. It is therefore of industrial interest to produce specific enzyme cocktails constitutively and independently of inducers. In this review, we focus on the methods to modulate TF activities for inducer-independent production of CAZymes and highlight various approaches that are used to construct strains displaying constitutive expression of plant biomass degrading enzyme networks. These approaches and combinations thereof are also used to construct strains displaying increased expression of CAZymes under inducing conditions, and make it possible to design strains in which different enzyme mixtures are simultaneously produced independently of the carbon source.

Quantitative multiplexed profiling of Penicillium funiculosum secretome grown on polymeric cellulase inducers and glucose

Filamentous fungi respond to the need to secure utilisable carbon from their growth milieu by secreting unique extracellular proteins depending upon the types of polymeric substrates. We have here profiled the variations in the secretome pattern of a non-model hypercellulolytic fungus - Penicillium funiculosum, grown in minimal media containing four different polymeric cellulase inducers, i.e., Avicel, wheat bran, ammonium-pretreated wheat straw and Avicel & wheat bran, and glucose over its early and late log phases of growth. Of the 137 secreted proteins validated at 1% FDR, we identified the quantified proteins in three clusters as early, persistently or lately expressed. The type of carbon substrate present in the culture media significantly affected the levels of cellulolytic enzymes expression by the fungus. The top abundant proteins quantified in the secretome for Avicel and wheat bran were cellobiohydrolaseI [GH7-CBM1], cellobiohydrolaseII [GH6-CBM1], β-glucosidase [GH3], arabinofuranosidase [GH51] and β-xylosidase [GH3], with bicupin being highest in case of wheat straw. Our results further suggested that the fungus secreted the extracellular proteins in waves, such that the initial responders act to hydrolyse the composite substrates in the culture environment before the second wave of proteins which tend to be more tailored to the specific substrate in the cultivating media.

BIOLOGICAL SIGNIFICANCE

In this article, we have comprehensively examined the dynamics of the secretome of a non-model hypercellulolytic fungus produced in response to model and composite cellulase inducers. Our study has provided additional insights into how the fungus enzyme machinery responds to the presence of different polymeric cellulase inducers over the two different growth phases (early growth and late growth phase). The comprehensive typing and quantification of the different proteins present in the secretomes of the cellulolytic fungal strains in response to diverse nutrient sources hold many prospects in understanding the fungus unique enzyme machinery and dynamics for the downstream biotechnological applications.

Disruption of zinc finger DNA binding domain in catabolite repressor Mig1 increases growth rate, hyphal branching, and cellulase expression in hypercellulolytic fungus Penicillium funiculosum NCIM1228

BACKGROUND

There is an urgent requirement for second-generation bio-based industries for economical yet efficient enzymatic cocktail to convert diverse cellulosic biomass into fermentable sugars. In our previous study, secretome of Penicillium funiculosum NCIM1228 showed high commercial potential by exhibiting high biomass hydrolyzing efficiency. To develop NCIM1228 further as an industrial workhorse, one of the major genetic interventions needed is global deregulation of cellulolytic genes to achieve higher enzyme production. Mig1 orthologs found in all yeast and filamentous fungi are transcriptional regulators that maintain carbon homeostasis by negatively regulating genes of secondary carbon source utilization. Their disruption has long been known to be beneficial for increasing the production of secreted enzymes for alternate carbon source utilization.

RESULTS

Upon detailed genotypic and phenotypic analysis, we observed that NCIM1228 harbors a truncated yet functional allele of homolog of a well-known catabolite repressor, Mig1. Alleviation of carbon repression in NCIM1228 was attained by replacing functional Mig1¹³⁴ allele with null allele Mig1⁸⁸. P. funiculosum having Mig1⁸⁸ null allele showed better growth characteristics and 1.75-fold better glucose utilization than parent strain. We also showed that visibly small colony size, one of the major characteristics of CCR disruptant strains in filamentous fungi, was not due to retarded growth, but altered hyphal morphology. CCR-disrupted strain PfMig1⁸⁸ showed profuse branching pattern in terminal hyphae resulting in small and compact colonies with compromised filamentous proliferation. We further observed that basal level expression of two major classes of cellulases, namely, cellobiohydrolase and endoglucanase, was regulated by Mig1¹³⁴ in NCIM1228, whereas other two major classes, namely, xylanases and β-glucosidase, were only marginally regulated. Finally, CCR disruption in P. funiculosum NCIM1228 led to prolonged cellulase induction in production medium resulting in twofold increased cellulase activity than the parent strain with maximum secreted protein titer being > 14 g/l.

CONCLUSIONS

CCR-disrupted P. funiculosum showed better growth, enhanced carbon source utilization, profuse branching pattern in terminal hyphae, and higher cellulase activity than parent strain. Our findings are particularly important in shedding light on important functions performed by Mig1 in addition to its role as negative regulator of alternate carbon source utilization in filamentous fungi.

Carbon Catabolite Repression in Filamentous Fungi

Carbon Catabolite Repression (CCR) has fascinated scientists and researchers around the globe for the past few decades. This important mechanism allows preferential utilization of an energy-efficient and readily available carbon source over relatively less easily accessible carbon sources. This mechanism helps microorganisms to obtain maximum amount of glucose in order to keep pace with their metabolism. Microorganisms assimilate glucose and highly favorable sugars before switching to less-favored sources of carbon such as organic acids and alcohols. In CCR of filamentous fungi, CreA acts as a transcription factor, which is regulated to some extent by ubiquitination. CreD-HulA ubiquitination ligase complex helps in CreA ubiquitination, while CreB-CreC deubiquitination (DUB) complex removes ubiquitin from CreA, which causes its activation. CCR of fungi also involves some very crucial elements such as Hexokinases, cAMP, Protein Kinase (PKA), Ras proteins, G protein-coupled receptor (GPCR), Adenylate cyclase, RcoA and SnfA. Thorough study of molecular mechanism of CCR is important for understanding growth, conidiation, virulence and survival of filamentous fungi. This review is a comprehensive revision of the regulation of CCR in filamentous fungi as well as an updated summary of key regulators, regulation of different CCR-dependent mechanisms and its impact on various physical characteristics of filamentous fungi.

Deletion Analysis of GH7 Endoglucanase Gene (cel7B) Promoter Region in a Talaromyces cellulolyticus ligD-Disrupted Strain

Talaromyces cellulolyticus is expected to become an industrial cellulase producer. In this study, we performed deletion analysis of the promoter region of the GH7 endoglucanase gene (cel7B), which encodes one of the major cellulases, using a β-glucuronidase reporter system. To obtain strains that harbor each gene cassette at the same locus, we had to improve the homologous recombination frequency. Hence, the ligD gene, encoding DNA ligase IV, was disrupted by homologous recombination. After that, the introduced pyrF marker gene, encoding orotate phosphoribosyl transferase, was deleted by a marker recycling system. The resultant strain, YDLP, exhibits high homologous recombination frequency. These data suggest that this approach will drastically improve the genetic modification tools of T. cellulolyticus. We obtained 7 strains for reporter analysis using YDLP as the host strain. Reporter analysis revealed that the promoter region between -812 and -612 is important for expression of cel7B. These results imply a relationship between this region and novel transcriptional factors.

Regulators of plant biomass degradation in ascomycetous fungi

Fungi play a major role in the global carbon cycle because of their ability to utilize plant biomass (polysaccharides, proteins, and lignin) as carbon source. Due to the complexity and heterogenic composition of plant biomass, fungi need to produce a broad range of degrading enzymes, matching the composition of (part of) the prevalent substrate. This process is dependent on a network of regulators that not only control the extracellular enzymes that degrade the biomass, but also the metabolic pathways needed to metabolize the resulting monomers. This review will summarize the current knowledge on regulation of plant biomass utilization in fungi and compare the differences between fungal species, focusing in particular on the presence or absence of the regulators involved in this process.

Enhancing cellulase production by overexpression of xylanase regulator protein gene, xlnR, in Talaromyces cellulolyticus cellulase hyperproducing mutant strain

We obtained strains with the xylanase regulator gene, xlnR, overexpressed (HXlnR) and disrupted (DXlnR) derived from Talaromyces cellulolyticus strain C-1, which is a cellulase hyperproducing mutant. Filter paper degrading enzyme activity and cellobiohydrolase I gene expression was the highest in HXlnR, followed by C-1 and DXlnR. These results indicate that the enhancement of cellulase productivity was succeeded by xlnR overexpression.

Draft Genome Sequence of Talaromyces cellulolyticus Strain Y-94, a Source of Lignocellulosic Biomass-Degrading Enzymes

Talaromyces cellulolyticus (formerly Acremonium cellulolyticus) is a promising fungus for cellulase production. Here, we present the draft genome sequence of T. cellulolyticus strain Y-94. The genome is 36.4 Mbp long and contains genes for several enzymes involved in the degradation of lignocellulosic biomass, including cellulases, hemicellulases, pectinases, and amylases.

Redesigning the regulatory pathway to enhance cellulase production in Penicillium oxalicum

BACKGROUND

In cellulolytic fungi, induction and repression mechanisms synchronously regulate the synthesis of cellulolytic enzymes for accurate responses to carbon sources in the environment. Many proteins, particularly transcription regulatory factors involved in these processes, were identified and genetically engineered in Penicillium oxalicum and other cellulolytic fungi. Despite such great efforts, its effect of modifying a single target to improve the production of cellulase is highly limited.

RESULTS

In this study, we developed a systematic strategy for the genetic engineering of P. oxalicum to enhance cellulase yields, by enhancing induction (by blocking intracellular inducer hydrolysis and increasing the activator level) and relieving the repression. We obtained a trigenic recombinant strain named 'RE-10' by deleting bgl2 and creA, along with over-expressing the gene clrB. The cellulolytic ability of RE-10 was significantly improved; the filter paper activity and extracellular protein concentration increased by up to over 20- and 10-fold, respectively, higher than those of the wild-type (WT) strain 114-2 both on pure cellulose and complex wheat bran media. Most strikingly, the cellulolytic ability of RE-10 was comparable with that of the industrial P. oxalicum strain JU-A10-T obtained by random mutagenesis. Comparative proteomics analysis provided further insights into the differential secretomes between RE-10 and WT strains. In particular, the enzymes and accessory proteins involved in lignocellulose degradation were elevated specifically and dramatically in the recombinant, thereby confirming the importance of them in biomass deconstruction and implying a possible co-regulatory mechanism.

CONCLUSIONS

We established a novel route to substantially improve cellulolytic enzyme production up to the industrial level in P. oxalicum by combinational manipulation of three key genes to amplify the induction along with derepression, representing a milestone in strain engineering of filamentous fungi. Given the conservation in the mode of cellulose expression regulation among filamentous fungi, this strategy could be compatible with other cellulase-producing fungi.

Characterization of the xylanase regulator protein gene, xlnR, in Talaromyces cellulolyticus (formerly known as Acremonium cellulolyticus)

We cloned a putative Talaromyces cellulolyticus (formerly known as Acremonium cellulolyticus) xlnR gene and isolated a xlnR disruptant strain. XlnR protein was localized in the nucleus. Xylanase production by the xlnR disruptant was lower than in the control strain at both the enzyme and transcriptional level. These data suggest that the XlnR protein regulates xylanase production in T. cellulolyticus.

Identification and characterization of core cellulolytic enzymes from Talaromyces cellulolyticus (formerly Acremonium cellulolyticus) critical for hydrolysis of lignocellulosic biomass

BACKGROUND

Enzymatic hydrolysis of pretreated lignocellulosic biomass is an essential process for the production of fermentable sugars for industrial use. A better understanding of fungal cellulase systems will provide clues for maximizing the hydrolysis of target biomass. Talaromyces cellulolyticus is a promising fungus for cellulase production and efficient biomass hydrolysis. Several cellulolytic enzymes purified from T. cellulolyticus were characterized in earlier studies, but the core enzymes critical for hydrolysis of lignocellulosic biomass remain unknown.

RESULTS

Six cellulolytic enzymes critical for the hydrolysis of crystalline cellulose were purified from T. cellulolyticus culture supernatant using an enzyme assay based on synergistic hydrolysis of Avicel. The purified enzymes were identified by their substrate specificities and analyses of trypsin-digested peptide fragments and were classified into the following glycosyl hydrolase (GH) families: GH3 (β-glucosidase, Bgl3A), GH5 (endoglucanase, Cel5A), GH6 (cellobiohydrolase II, Cel6A), GH7 (cellobiohydrolase I and endoglucanase, Cel7A and Cel7B, respectively), and GH10 (xylanase, Xyl10A). Hydrolysis of dilute acid-pretreated corn stover (PCS) with mixtures of the purified enzymes showed that Cel5A, Cel7B, and Xyl10A each had synergistic effects with a mixture of Cel6A and Cel7A. Cel5A seemed to be more effective in the synergistic hydrolysis of the PCS than Cel7B. The ratio of Cel5A, Cel6A, Cel7A, and Xyl10A was statistically optimized for the hydrolysis of PCS glucan in the presence of Bgl3A. The resultant mixture achieved higher PCS glucan hydrolysis at lower enzyme loading than a culture filtrate from T. cellulolyticus or a commercial enzyme preparation, demonstrating that the five enzymes play a role as core enzymes in the hydrolysis of PCS glucan.

CONCLUSIONS

Core cellulolytic enzymes in the T. cellulolyticus cellulase system were identified to Cel5A, Cel6A, Cel7A, Xyl10A, and Bgl3A and characterized. The optimized mixture of these five enzymes was highly effective for the hydrolysis of PCS glucan, providing a foundation for future improvement of the T. cellulolyticus cellulase system.