The effect of pH and ionic strength on the adsorption of glyphosate onto ferrihydrite

Enhancing Zn (II) recovery efficiency: Bi-divalent nickel-cobalt ferrite spinel NiXCo1-xFe2O4 as a Game-changing Adsorbent-an experimental and computational study

This study presents a comprehensive investigation into NiXCo1-xFe2O4 (x = 0.5) spinel nanoparticles synthesized through a one-pot hydrothermal method using Co(NO3)2.6H2O and Ni(NO3)2.6H2O salts. XRD, FTIR, FESEM, and VSM analyses confirmed a cubic structure of NiXCo1-xFe2O4 (x = 0.5) nanoparticles without impurities. These nanoparticles exhibit efficient Zn (II) adsorption characteristics, following Langmuir isotherm and pseudo-second-order kinetics. The maximum adsorption capacity was measured to be 666.67 mg g-1 at pH = 7, with mechanisms involving both electrostatic attraction and cation exchange. Desorption studies indicate more than 75% Zn (II) recovery in an acidic environment (pH = 2) after three cycles. Computational analysis was used to validate the experimental results through Molecular Dynamics simulations, initially focusing on NiXCo1-xFe2O4 (x = 0.5). Further exploration involved variations in x at 0.25 and 0.75 to identify the optimal Ni and Co ratio in this bivalent cation spinel ferrite. Computational analyses reveal the superior performance of NiXCo1-xFe2O4 (x = 0.75) in Zn (II) removal, supported by radial distribution analysis, VdW energy, Coulombic energy, mean square displacement (MSD), root mean square displacement (RMSD), and interaction energy. This comprehensive study provides valuable insights into the adsorption behavior and structural stability of NiXCo1-xFe2O4 nanoparticles, showcasing potential applications in Zn (II) removal.

Bioengineering of Cu2O structured macro-biotemplate for the ultra-efficient and selective hand-retrieval of glyphosate from agro-farms

Glyphosate (Gly) is a massively utilized toxic herbicide exceeding its statutory restrictions, causing adverse environmental and health impacts. Engineered nanomaterials, even though are integral to remediate Gly, their practical use is limited due to time and energy driven purifications, and negative environmental impacts. Here, a 3D wide area (~1.6 ± 0.4 cm2) Cu2O nanoparticle supported biotemplate is designed using fish-scale wastes as a sustainable approach for the ultra-efficient and selective hand-remediation of Gly from real-time samples from agro-farms. While the innate metal binding and reducing ability of collagenous scales aided self-synthesis cum grafting of Cu2O, the selective binding potential of Cu2O to Gly facilitated its hand-retrieval; as assessed using optical characterizations, Fourier transform infrared spectroscopy, thermogravimetric analysis and liquid chromatography mass spectrometry. Optimization studies revealed extractions of diverse pay-loads of Gly between 0.1 μg/mL to 40 μg/mL per 80 mg biotemplate grafted with ~6.354 μg of sub-5 nm Cu2O and was exponential to the number of Cu2O@biotemplates. Even though pH and surfactant didn't have any impact on the adsorption of Gly to the Cu2O@biotemplates, increase in the ionic strength led to a drastic increase in the adsorption. Density function theory simulations unveiled the involvement of phosphonic and carboxylic groups of Gly for interaction with Cu2O with a bond length of 1.826 Å and 1.833 Å, respectively. Overall, our sustainably generated, cost-efficient, hand-retrievable Cu2O supported biotemplate can be generalized to extract diverse organophosphorus toxins from agro-farms and other sewage embodiments. SYNOPSIS: Glyphosate is an excessively applied herbicide with potent health hazards and carcinogenicity. Thus, a hand removable Cu2O-supported biotemplate to selectively and efficiently remediate glyphosate from irrigation water is developed.

In the presence of the other: How glyphosate and peptide molecules alter the dynamics of sorption on goethite

The interactions with soil mineral surfaces are among the factors that determine the mobility and bioavailability of organic contaminants and of nutrients present in dissolved organic matter (DOM) in soil and aquatic environments. While most studies focus on high molar mass organic matter fractions (e.g., humic and fulvic acids), very few studies investigate the impact of DOM constituents in competitive sorption. Here we assess the sorption behavior of a heavily used herbicide (i.e., glyphosate) and a component of DOM (i.e., a peptide) at the water/goethite interface, inclusive of potential glyphosate-peptide interactions. We used in-situ ATR-FTIR (attenuated total reflectance Fourier-transform infrared) spectroscopy to study sorption kinetics and mechanisms of interaction as well as conformational changes to the secondary structure of the peptide. NMR (nuclear magnetic resonance) spectroscopy was used to assess the level of interaction between glyphosate and the peptide and changes to the peptide' secondary structure in solution. For the first time, we illustrate competition for sorption sites results in co-sorption of glyphosate and peptide molecules that affects the extent, kinetics, and mechanism of interaction of each with the surface. In the presence of the peptide, the formation of outer-sphere glyphosate-goethite complexes is favored albeit inner-sphere glyphosate-goethite bonds (i.e., POFe) are still formed. The presence of glyphosate induces secondary structural shifts of the sorbed peptide that maximizes the formation of H-bonds with the goethite surface. However, glyphosate and the peptide do not seem to interact with one another in solution nor at the goethite surface upon sorption. The results of this work highlight potential consequences of competition for sorption sites, for example the transport of organic contaminants and nutrient-rich (i.e., nitrogen) DOM components in relevant environmental systems. Predicting the rate and extent with which organic pollutants are removed from solution by a given solid is also one of the most critical factors for the design of effective sorption systems in engineering applications.

Unraveling the role of polysaccharide-goethite associations on glyphosate' adsorption-desorption dynamics and binding mechanisms

HYPOTHESIS

Glyphosate retention at environmental interfaces is strongly governed by adsorption and desorption processes. In particular, glyphosate can react with organo-mineral associations (OMAs) in soils, sediments, and aquatic environments. We hypothesize mineral-adsorbed biomacromolecules modulate the extent and rate of glyphosate adsorption and desorption where electrostatic and noncovalent interactions with organo-mineral surfaces are favored.

EXPERIMENTS

Here we use in-situ attenuated total reflectance Fourier-transform infrared, X-ray photoelectron spectroscopy, and batch experiments to characterize glyphosate' adsorption and desorption mechanisms and kinetics at an organo-mineral interface. Model polysaccharide-goethite OMAs are prepared with a range of organic (polysaccharide, PS) surface loadings. Sequential adsorption-desorption studies are conducted by introducing glyphosate and background electrolyte solutions, respectively, to PS-goethite OMAs.

FINDINGS

We find the extent of glyphosate adsorption at PS-goethite interfaces was reduced compared to that at the goethite interface. However, increased polysaccharide surface loading resulted in lower relative glyphosate desorption. At the same time, increased PS surface loading yielded slower glyphosate adsorption and desorption kinetics compared to corresponding processes at the goethite interface. We highlight that adsorbed PS promotes the formation of weak noncovalent interactions between glyphosate and PS-goethite OMAs, including the evolution of hydrogen bonds between (i) the amino group of glyphosate and PS and (ii) the phosphonate group of glyphosate and goethite. It is also observed that glyphosate' phosphonate group preferentially forms inner-sphere monodentate complexes with goethite in PS-goethite whereas bidentate configurations are favored on goethite.

Adsorption Mechanisms of Glyphosate on Ferrihydrite: Effects of Al Substitution and Aggregation State

Ferrihydrite is one of the most reactive iron (Fe) (oxyhydr)oxides in soils, but the adsorption mechanisms of glyphosate, the most widely used herbicide, on ferrihydrite remain unknown. Here, we determined the adsorption mechanisms of glyphosate on pristine and Al-substituted ferrihydrites with aggregated and dispersed states using macroscopic adsorption experiments, zeta potential, phosphorus K-edge X-ray absorption near-edge structure spectroscopy, in situ attenuated total reflectance Fourier transform infrared spectroscopy coupled with two-dimensional correlation spectroscopy, and multivariate curve resolution analyses. Aggregation of ferrihydrite decreases the glyphosate adsorption capacity. The partial substitution of Al in ferrihydrite inhibits glyphosate adsorption on aggregated ferrihydrite due to the decrease of external specific surface area, while it promotes glyphosate adsorption on dispersed ferrihydrite, which is ascribed to the increase of surface positive charge. Glyphosate predominately forms protonated and deprotonated, depending on the sorption pH, monodentate-mononuclear complexes (MMH1/MMH0, 77-90%) on ferrihydrites, besides minor deprotonated bidentate-binuclear complexes (BBH0, 23-10%). Both Al incorporation and a low pH favor the formation of the BB complex. The adsorbed glyphosate preferentially forms the MM complex on ferrihydrite and preferentially bonds with the Al-OH sites on Al-substituted ferrihydrite. These new insights are expected to be useful in predicting the environmental fate of glyphosate in ferrihydrite-rich environments.

The pH dependent surface charging and points of zero charge. X. Update

Surfaces are often characterized by their points of zero charge (PZC) and isoelectric points (IEP). Different authors use these terms for different quantities, which may be equal to the actual PZC under certain conditions. Several popular methods lead to results which are inappropriately termed PZC. This present review is limited to zero-points obtained in the presence of inert electrolytes (halides, nitrates, and perchlorates of the 1st group metals). IEP are reported for all kinds of materials. PZC of metal oxides obtained as common intersection points of potentiometric curves for 3 or more ionic strengths (or by means of equivalent methods) are also reported, while the apparent PZC obtained by mass titration, pH-drift method, etc. are deliberately neglected. The results published in the recent publications and older results overlooked in the previous compilations by the same author are reported. The PZC/IEP are accompanied by information on the temperature and on the nature and concentration of supporting electrolyte (if available). The references to previous reviews by the same author allow to compare the newest results with the PZC/IEP of similar materials from the older literature.

Adsorptive behavior of multi-walled carbon nanotubes immobilized magnetic nanoparticles for removing selected pesticides from aqueous matrices

The present work synthesized two new materials of functionalized multi-walled carbon nanotubes (MWCNT-OH and MWCNT-COOH) impregnated with magnetite (Fe₃O₄) using solution precipitation methodology. The resulting MWCNT-OH-Mag and MWCNT-COOH-Mag materials were characterized by scanning electron microscopy coupled with energy dispersion X-ray spectroscopy, Fourier transform infrared, X-ray diffraction, atomic force microscopy, and electrical force microscopy. The characterization results indicate that the -OH functional groups in the MWCNT interact effectively with magnetite iron favoring impregnation and indicating the regular distribution of nanoparticles on the surface of the synthesized materials. The adsorption efficiency of the MWCNT-OH-Mag and MWCNT-COOH-Mag materials was tested using the pollutants 2,4-D and Atrazine. Over batch studies carried out under different pH ranges, it was found that the optimal condition for 2,4-D adsorption was at pH 2, while for Atrazine, it was found at pH 6. The rapid adsorption kinetics of 2,4-D and Atrazine reaches equilibrium within 30 min. The pseudo-first-order model described 2,4-D adsorption well. The General-order model described better atrazine adsorption. The magnetically doped adsorbent functionalized with -OH surface groups (MWCNT-OH-Mag) demonstrated superior adsorption performance and increased Fe-doped sites. The Sips model described the adsorption isotherms accurately. MWCNT-OH-Mag presented the greatest adsorption capacity at 51.4 and 47.7 mg g^-1 for 2,4-D and Atrazine, respectively. Besides, electrostatic forces and complexation rule the molecular interactions between metals and pesticides. The leaching and regeneration tests of the synthesized materials indicate high stability in an aqueous solution. Furthermore, experiments with wastewater samples contaminated with the model pollutants indicate that the novel adsorbents are highly promising for enhancing water purification by adsorptive separation.

Zinc oxide nanoparticles adsorb emerging pollutants (glyphosate pesticide) from aqueous solutions

The present study captures the precipitation synthesis of zinc nanoparticles and modification with alumina and oleic acid. The crystalline size evaluated from the XRD profile of the zinc oxide nanoparticles was 18.05 nm but was reduced to 14.20 and 14.50 nm upon modification with oleic acid and alumina. The XRD spectra also showed evidence of the amorphous nature of zinc oxide nanoparticles and subsequent enhancement upon modification. A porous appearance was observed in the SEM instrumentation but seems to be enhanced by modification. The FTIR absorption spectra of the nanoparticles showed a peak associated with ZnO vibration around 449 cm, but the enhanced intensity was observed due to modification. The prepared ZnO-NPs and the modified samples were good materials for the adsorption removal of glyphosate from water, recording efficiencies above 94% at neutral pH and showing a possible incremental trend with an enhanced period of contact and adsorbent dosage. The adsorbents showed maximum capacity that ranged from 82.85 to 82. 97 mg/g. The adsorption models of Freundlich, Temkin, Dubinin-Radushkevich and BET showed excellent fitness. Results from computational results complemented experimental data and were used to identify the sites for adsorption and characteristics of molecular descriptors for the systems.

Ferrihydrite synthesis in the presence of amino acids and artificial seawater

Ferrihydrite is widespread in clays, soils, and living organisms and was found on Mars. This iron-mineral could be found on the prebiotic Earth, which also contained simple monomeric amino acids. For prebiotic chemistry, it is important to understand how amino acids have an effect on the process of iron oxide formations. There are three important results in this work: (a) preconcentration of cysteine and aspartic acid, (b) formation of cystine and probably the cysteine peptide occurred during ferrihydrite syntheses, and (c) amino acids have an effect on iron oxide synthesis. For samples containing aspartic acid and cysteine, their presence on the surface or mineral structure can be confirmed by FT-IR spectra. Surface charge analysis showed a relatively high decrease for samples synthesized with cysteine. Scanning electron microscopy did not show marked morphological differences among the samples, except for the seawater sample containing cysteine, which had a lamina-shaped morphology surrounded by circular iron particles, indicating the possible formation of a cysteine structure involving iron oxide particles. The thermogravimetric analysis of the samples indicates that the presence of salts and amino acids in the synthesis of ferrihydrite has an effect on the thermal behavior of the iron oxide/amino acids and modifying the water-loss temperature. The heating of the cysteine samples, synthesized in distilled water and artificial seawater, showed several peaks of degradation of cysteine. In addition, heating of the aspartic acid samples produced the polymerization of this amino acid and peaks of degradation of it. FTIR spectra and XRD patterns did not indicate the precipitation of methionine, 2-aminoisobutyric acid, lysine, or glycine with the iron oxide formations. However, the heating of the glycine, methionine and lysine samples, synthesized in artificial seawater, showed peaks that could be attributed to the degradation of them. Then this could be an indication that these amino acids precipitate with the minerals during the syntheses. Also, the dissolution of these amino acids in artificial seawater prevents the formation of ferrihydrite.

Cadmium removal from aqueous solution by blended bamboo sawdust/rice-husk biochar; optimization of influencing parameters

This study attempted to investigate the adsorptive potential of blended bamboo (Oxytenanthera abyssinica) sawdust/rice husk (BSD/RH) at a ratio of 1:1 carbonized at 400 °C for the sorption of cadmium ions from synthetic solutions in batch mode. The Box-Behnken Design in response surface methodology (RSM) was used to achieve the best removal efficiency and adsorption capacity of the biochar. With a p-value of 0.0001, the initial Cd2+ concentration and adsorbent dose were discovered to be the most significant parameters controlling the adsorption capacity and removal efficiency of Cd2+ from the solution. At a pH of 8.95, ionic strength of 0.020 mol/L KNO3, a contact time of 15 min, an initial concentration of 200 mg/L, and an adsorbent dose of 0.5 g, the optimum Cd2+ removal and adsorption capacity of 99.97% and 358.65 mg/g, respectively, were obtained. The optimized conditions were later used to determine the removal efficiency and adsorption capacity of pristine biochars of rice husk and bamboo sawdust, which were found to be 79.8% and 83.7%, respectively. This finding indicates the potential for using biosorbent derived from blended feedstock materials to remove heavy metals such as cadmium.

Phosphate adsorption improvement using a novel adsorbent by CaFe/LDH supported onto CO2 activated biochar

It is imperative to remove phosphate from the aquatic system. This nutrient in excess can cause environmental problems such as eutrophication. Therefore, aiming to enhance phosphate removal, this work presents a novel adsorbent developed from the construction of Ca²⁺/Fe³⁺ layer double hydroxides (CaFe/LDH) supported onto biochar physically activated with CO₂ [CaFe/biochar (CO₂)]. Pristine biochar was produced from the pyrolysis of Eucalyptus saligna sawdust, activated with CO₂, and then impregnated with CaFe/LDH. The CaFe/biochar (CO₂) was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET). The characterization confirmed a proper synthesis of the new adsorbent. Experiments were conducted in the form of batch adsorption. Results indicated that the optimum pH and adsorbent dosage were 2.15 and 0.92 g L^-1, respectively. Adsorption kinetics, isotherms, and thermodynamics were also evaluated. Adsorption kinetics and isotherms were better fitted by the pseudo n order and Freundlich models, respectively. Results also indicated a better adsorption capacity (99.55 mg·g^-1) at 55 °C. The thermodynamic indicators depicted that the adsorption process was favorable, spontaneous, and endothermic. Overall, CaFe/biochar (CO₂) could be potentially applied for the adsorptive removal of phosphate from an aqueous solution.

Microcosm test for pesticide fate assessment in planted water filters: 13C,15N-labeled glyphosate as an example

Planted filters are often used to remove pesticides from runoff water. However, the detailed fate of pesticides in the planted filters still remains elusive. This hampers an accurate assessment of environmental risks of the pesticides related to their fate and thereby development of proper mitigation strategies. In addition, a test system for the chemical fate analysis including plants and in particular for planted filters is not well established yet. Therefore, we developed a microcosm test to simulate the fate of pesticide in planted filters, and applied 2-¹³C,¹⁵N-glyphosate as a model pesticide. The fate of 2-¹³C,¹⁵N-glyphosate in the planted microcosms over 31 day-incubation period was balanced and compared with that in the unplanted microcosms. The mass balance of 2-¹³C,¹⁵N-glyphosate turnover included ¹³C mineralization, degradation products, and the ¹³C and ¹⁵N incorporation into the rhizosphere microbial biomass and plants. We observed high removal of glyphosate (> 88%) from the water mainly due to adsorption on gravel in both microcosms. More glyphosate was degraded in the planted microcosms with 4.1% of ¹³C being mineralized, 1.5% of ¹³C and 3.8% of ¹⁵N being incorporated into microbial biomass. In the unplanted microcosms, 1.1% of ¹³C from 2-¹³C,¹⁵N-glyphosate was mineralized, and only 0.2% of ¹³C and 0.1% of ¹⁵N were assimilated into microbial biomass. The total recovery of ¹³C and ¹⁵N was 81% and 85% in planted microcosms, and 91% and 93% in unplanted counterparts, respectively. The microcosm test was thus proven to be feasible for mass balance assessments of the fate of non-volatile chemicals in planted filters. The results of such studies could help better manage and design planted filters for pesticide removal.

Phosphate addition enhances alkaline extraction of glyphosate from highly sorptive soils and aquatic sediments

BACKGROUND

Analytical constraints complicate environmental monitoring campaigns of the herbicide glyphosate and its major degradation product aminomethylphosphonic acid (AMPA): their strong sorption to soil minerals requires harsh extraction conditions. Coextracted matrix compounds impair downstream analysis and must be removed before analysis.

RESULTS

A new extraction method combined with subsequent capillary electrophoresis-mass spectrometry for derivatization-free analysis of glyphosate and AMPA in soil and sediment was developed and applied to a suite of environmental samples. It was compared to three extraction methods from literature. We show that no extraction medium reaches 100% recovery. The new phosphate-supported alkaline extraction method revealed (1) high recoveries of 70-90% for soils and aquatic sediments, (2) limits of detections below 20 μg kg-1 , and (3) a high robustness, because impairing matrix components (trivalent cations and humic acids) were precipitated prior to the analysis. Soil and sediment samples collected around Tübingen, Germany, revealed maximum glyphosate and AMPA residues of 80 and 2100 μg kg-1 , respectively, with residues observed along a core of lake sediments. Glyphosate and/or AMPA were found in 40% of arable soils and 57% of aquatic sediment samples.

CONCLUSION

In this work, we discuss soil parameters that influence (de)sorption and thus extraction. From our results we conclude that residues of glyphosate in environmental samples are easily underestimated. With its possible high throughput, the method presented here can resolve current limitations in monitoring campaigns of glyphosate by addressing soil and aquatic sediment samples with critical sorption characteristics.

Leonardite powder as an efficient adsorbent for cationic and anionic dyes

This paper aims to investigate the uses of leonardite powder (LP) as an effective adsorbent for the removal of basic red 18 (BR18) and reactive red 180 (RR180) dyes. LP was characterized using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), Zeta potential, Brunauer-Emmett-Teller (BET) analysis, Fourier transform infrared spectroscopy (FTIR), and X-ray fluorescence (XRF). The adsorption process was assessed based on pH, size and the amount of the adsorbent, BR18 and RR180 concentration, and the contact time. BR18 dye was completely adsorbed onto the LP (the removal efficiency equals 100%) after 45 min at the optimum condition (original pH [6.5], the particle size of 45 μm, the adsorbent dose of 0.25 g/L, and the initial concentration of 10 mg/L). For RR180, the maximum removal efficiency (74%) was obtained when 1 g/L LP with 45 um size was added to an RR180 solution of 10 mg/L concentration. Temkin isotherm was used to explain the adsorption of BR18. In contrast, RR180 adsorption was described by the Freundlich model. The adsorptions of both dyes followed the pseudo-second-order kinetics. The reusability of the LP was assessed. For BR18, the efficiency decreased to 96% in the second cycle and reached 42% in the fifth cycle. In RR180, LP was not able to be reused efficiently. As a result, the LP ability for BR18 removal is higher than the RR180 in terms of uptake and reusability. PRACTITIONER POINTS: BR18 and RR180 dyes elimination was carried out with leonardite powder (LP). The maximum removal efficiencies for BR18 and RR180 were 100% and 74%, respectively. The LP ability for BR18 removal is higher than the RR180 in terms of uptake and reusability.

Hydrogel-Based Adsorbent Material for the Effective Removal of Heavy Metals from Wastewater: A Comprehensive Review

Water is a vital resource that is required for social and economic development. A rapid increase in industrialization and numerous anthropogenic activities have resulted in severe water contamination. In particular, the contamination caused by heavy metal discharge has a negative impact on human health and the aquatic environment due to the non-biodegradability, toxicity, and carcinogenic effects of heavy metals. Thus, there is an immediate need to recycle wastewater before releasing heavy metals into water bodies. Hydrogels, as potent adsorbent materials, are a good contenders for treating toxic heavy metals in wastewater. Hydrogels are a soft matter formed via the cross-linking of natural or synthetic polymers to develop a three-dimensional mesh structure. The inherent properties of hydrogels, such as biodegradability, swell-ability, and functionalization, have made them superior applications for heavy metal removal. In this review, we have emphasized the recent development in the synthesis of hydrogel-based adsorbent materials. The review starts with a discussion on the methods used for recycling wastewater. The discussion then shifts to properties, classification based on various criteria, and surface functionality. In addition, the synthesis and adsorption mechanisms are explained in detail with the understanding of the regeneration, recovery, and reuse of hydrogel-based adsorbent materials. Therefore, the cost-effective, facile, easy to modify and biodegradable hydrogel may provide a long-term solution for heavy metal removal.

Effects of Phosphonate Herbicides on the Secretions of Plant-Beneficial Compounds by Two Plant Growth-Promoting Soil Bacteria: A Metabolomics Investigation

Plant growth-promoting rhizobacteria (PGPR) that colonize plant roots produce a variety of plant-beneficial compounds, including plant-growth regulators, metal-scavenging compounds, and antibiotics against plant pathogens. Adverse effects of phosphonate herbicides, the most extensively used herbicides, on the growth and metabolism of PGPR species have been widely reported. However, the potential consequence of these effects on the biosynthesis and secretion of PGPR-derived beneficial compounds still remains to be investigated. Here, using high-resolution mass spectrometry and a metabolomics approach, we investigated both the intracellular metabolome and the extracellular secretions of biomass-normalized metabolite levels in two PGPR species (Pseudomonas protegens Pf-5, a Gram-negative bacterium; Priestia megaterium QM B1551, a Gram-positive bacterium) exposed to three common phosphonate herbicides (glyphosate, glufosinate, and fosamine; 0.1-1 mM) in either iron (Fe)-replete or Fe-deficient nutrient media. We quantified secreted auxin-type plant hormone compounds (phenylacetic acid and indole-3-acetic acid), iron-scavenging compounds or siderophores (pyoverdine and schizokinen), and antibiotics (2,4-diacetylphloroglucinol and pyoluteorin) produced by these PGPR species. The Fe-replete cells exposed to the phosphonate herbicides yielded up to a 25-fold increase in the production of both auxin and antibiotic compounds, indicating that herbicide exposure under Fe-replete conditions triggered metabolite secretions. However, the herbicide-exposed Fe-deficient cells exhibited a near 2-fold depletion in the secretion of these auxin and antibiotic compounds as well as a 77% decrease in siderophore production. Intracellular metabolomics analysis of the Fe-deficient cells further revealed metabolic perturbations in biosynthetic pathways consistent with the impaired production of the plant-beneficial compounds. Our findings implied that compromised cellular metabolism during nutrient deficiency may exacerbate the adverse effects of phosphonate herbicides on PGPR species.

Light Promotes the Immobilization of U(VI) by Ferrihydrite

The environmental behaviors of uranium closely depend on its interaction with natural minerals. Ferrihydrite widely distributed in nature is considered as one main natural media that is able to change the geochemical behaviors of various elements. However, the semiconductor properties of ferrihydrite and its impacts on the environmental fate of elements are sometimes ignored. The present study systematically clarified the photocatalysis of U(VI) on ferrihydrite under anaerobic and aerobic conditions, respectively. Ferrihydrite showed excellent photoelectric response. Under anaerobic conditions, U(VI) was converted to U(IV) by light-irradiated ferrihydrite, in the form of UO2+x (x < 0.25), where •O2− was the dominant reactive reductive species. At pH 5.0, ~50% of U(VI) was removed after light irradiation for 2 h, while 100% U(VI) was eliminated at pH 6.0. The presence of methanol accelerated the reduction of U(VI). Under aerobic conditions, the light illumination on ferrihydrite also led to an obvious but slower removal of U(VI). The removal of U(VI) increased from ~25% to 70% as the pH increased from 5.0 to 6.0. The generation of H2O2 under aerobic conditions led to the formation of UO4•xH2O precipitates on ferrihydrite. Therefore, it is proved that light irradiation on ferrihydrite significantly changed the species of U(VI) and promoted the removal of uranium both under anaerobic and aerobic conditions.

Unified, simple and decentralized treatment process for synthetic and real-time dye contaminated wastewaters

The aim of this study is to develop a simple, economical and effective treatment scheme to treat effluents from small scale textile dyeing units and tanneries, which have been set up in rural areas. The physicochemical properties of real time effluents procured from these industries were analysed. The workflow required for treating these effluents were ascertained by preliminary tests carried out on synthetically created solutions. A novel treatment scheme for tannery and textile dye effluents sludge volume reduction by the use of sodium hypochlorite was identified. Effective methods for the safe disposal and recycling of all the by-products generated from different steps were discussed. The proposed scheme was successfully able to decolourize and detoxify both the tannery and textile dyeing effluent with over 90% removal of both COD and BOD. The impacts of the treatment scheme on 14 different effluent parameters were reported. The methodology developed in this study may be utilized to construct simple localized treatment units for handling effluents in isolated rural areas. This preliminary treatment at the source, will help in the reduction of the load on the local treatment plants and prevent their choking.

Glyphosate adsorption onto porous clay heterostructure (PCH): kinetic and thermodynamic studies

The synthesis of PCH from natural bentonite produces a porous heterostructure material effective for the adsorption of glyphosate from water. The adsorption process takes place through an interaction between the silanol group of montmorillonite and/or the PCH adsorbent with the functional groups of glyphosate. The glyphosate adsorption isotherms, recorded for all the studied samples, have been established to be of Langmuir type. The kinetic of the herbicide adsorption on the PCH was best described by the pseudo-second-order model. With the increase in temperature from 25 to 50 °C, the sorption capacities of the materials studied towards glyphosate increased. The process of glyphosate adsorption was found to be endothermic and spontaneous in nature, as indicated by positive values of ΔH and negative values of ΔG. According to the results obtained, the herbicide sorption was more effective in a basic environment. The maximum amount of adsorbed glyphosate is almost doubled with PCH from 13.5 mg/g of natural clay to 27.5 mg/g of PCH.

Graphic abstract

Glyphosate: A Review on the Current Environmental Impacts from a Brazilian Perspective

The indiscriminate use of glyphosate is one of the main agricultural practices to combat weeds and grasses; however, its incorrect application increases soil and water contamination caused by the product. This situation is even more critical due to its great versatility for use in different cultivars and at lower prices, making it the most used pesticide in the world. Nevertheless, there is still a lack of in-depth studies regarding the damage that its use may cause. Therefore, this review focused on the analysis of environmental impacts at the soil-water interface caused by the use of glyphosate. In this sense, studies have shown that the intensive use of glyphosate has the potential to cause harmful effects on soil microorganisms, leading to changes in soil fertility and ecological imbalance, as well as impacts on aquatic environments derived from changes in the food chain. This situation is similar in Brazil, with the harmful effects of glyphosate in nontarget species and the contamination of the atmosphere. Therefore, it is necessary to change this scenario by modifying the type of pest control in agriculture, and actions such as crop rotation and biological control.

Application of Mussell-derived biosorbent to remove NH4+ from aqueous solution: Equilibrium and Kinetics

Mussel shells are often considered an abundant waste with no use. This study shows that the employment of mussel shells as a biosorbent for ammonium from water environment is completely possible. By using batch experimental method, optimal conditions for the ammonium adsorption onto mussel shells were determined. Specifically, those include a pH level of 8, contact time of 90 min, an initial ammonium concentration of 40 mg/l and the adsorbent dose of 700 mg/25 ml. With such operating conditions, experiments in laboratory aqueous solutions resulted in a maximum adsorption capacity of 2.33 mg/g, corresponded by 46.575% of efficiency. Adsorption isotherms and kinetics were well described with the Freundlich isothermal model, suggesting a heterogeneous adsorption process occurring on multilayers and both the pseudo-first-order and the pseudo-second-order, implying that the operational fundament was based on chemisorption. Analyses regarding SEM, EDS and FTIR were also implemented to identify the morphology, composition and functional groups of the adsorbent.

Cellulose-Based Hydrogels for Wastewater Treatment: A Concise Review

Finding affordable and environment-friendly options to decontaminate wastewater generated with heavy metals and dyes to prevent the depletion of accessible freshwater resources is one of the indispensable challenges of the 21st century. Adsorption is yet to be the most effective and low-cost wastewater treatment method used for the removal of pollutants from wastewater, while naturally derived adsorbent materials have garnered tremendous attention. One promising example of such adsorbents is hydrogels (HGs), which constitute a three-dimensional polymeric network of hydrophilic groups that is highly capable of adsorbing a large quantity of metal ions and dyes from wastewater. Although HGs can also be prepared from synthetic polymers, natural polymers have improved environmental benignity. Recently, cellulose-based hydrogels (CBHs) have been extensively studied owing to their high abundance, biodegradability, non-toxicity, and excellent adsorption capacity. This review emphasizes different CBH adsorbents in the context of dyes and heavy metals removal from wastewater following diverse synthesis techniques and adsorption mechanisms. This study also summarizes various process parameters necessary to optimize adsorption capacity followed by future research directions.

Ecotoxicology of glyphosate and recent advances in its mitigation by adsorption

Glyphosate (N-[phosphonomethyl]glycine) is one of the most popular herbicides now used in agricultural practice. The aim of this paper was to discuss the research progress and innovations in recent years on the mitigation of glyphosate (GLY) from aqueous media by adsorption. The ecotoxicology of GLY was discussed in the domain of its chronic and sub-chronic toxicity, genotoxicity, reproductive toxicity, and carcinogenicity, and potential risks of food contamination were discussed. It was observed that polymers and resins are the best class of adsorbents for GLY adsorption from aqueous media. GLY adsorption was best fit to either Freundlich or Langmuir isotherm depending on the nature of the adsorbent. The pseudo-second-order kinetics was also the best fit for modelling the kinetics of GLY adsorption. A review of the thermodynamics revealed that GLY adsorption was usually spontaneous and exothermic. Research trends and knowledge gaps are in the area of chemical mobility in environmental systems (especially in the presence of other chemical species), the use of heavy metal-laden adsorbent and molecular modelling. Furthermore, it was observed that the ecotoxicology of GLY still has some contentious areas where there is no conclusive stance.

Dye removal from water and wastewater by nanosized metal oxides - modified activated carbon: a review on recent researches

The conventional water and wastewater treatment methods are unable to provide up-to-data organized standards for drinking water and discharging effluents into natural ecosystems. Therefore, developing advanced and cost-effective methods to achieve published standards for water and wastewater and population needs are nowadays necessity. The important parts of this article are providing literature information about dyes and their effects on the environment and human health, adsorption properties and mechanism, adsorbent characteristics, and recent information on various aspects of modified activated carbons with nanosized metal oxides (AC- NMOs) in the removal of dyes. This review also summarized the effect of main environmental and operational parameters such as adsorbent dosage, pH, initial dye concentration, contact time, and temperature on the dye adsorption using AC-NMOs. Furthermore, the applied isotherm and kinetic models have been discussed.

Adsorptive Behavior of an Activated Carbon for Bisphenol A Removal in Single and Binary (Bisphenol A—Heavy Metal) Solutions

Bisphenol A (BPA) is an extensively produced and consumed chemical in the world. Due to its widespread use, contamination by this pollutant has increased in recent years, reaching a critical environmental point. This work investigates the feasibility of bisphenol A adsorption from industrial wastewater solutions, testing the reduction of bisphenol A in synthetic solutions by a commercial activated carbon, AC-40, in batch mode. Besides, mixtures of bisphenol A and different heavy metal cations were also studied. So far, no works have reported a complete study about bisphenol A removal by this activated carbon including the use of this material to remove BPA in the presence of metal cations. First, adsorption experiments were performed in batch changing pH, dose of adsorbent, initial bisphenol A concentration and contact time. Results showed greater retention of bisphenol A by increasing the acidity of the medium. Further, the percentage of bisphenol A adsorbed increased with increasing contact time. The selected conditions for the rest of the experiments were pH 5 and a contact time of 48 h. In addition, an increase in retention of bisphenol A when the dose of adsorbent increased was observed. Then, specific experiments were carried out to define the kinetics and the adsorption isotherm. Equilibrium data were adequately fitted to a Langmuir isotherm and the kinetics data fitted well to the pseudo-second-order model. The maximum adsorption capacity provided by Langmuir model was 94.34 mg/g. Finally, the effect of the presence of other heavy metals in water solution on the adsorption of bisphenol A was analyzed. Binary tests revealed competition between the adsorbates and a significant selectivity toward bisphenol A. Finally, the study of the adsorption performance in three consecutive adsorption–desorption cycles showed efficiencies higher than 90% in all cycles, indicating that the activated carbon has good reusability.

Interaction between glyphosate and montmorillonite in the presence of artificial seawater

Glyphosate (N- (phosphonomethyl) glycine) is one of the most widely used herbicides in the world. In the literature, there are several studies describing the interaction between glyphosate and clay minerals. However, there is a lack of data of this interaction in marine environments. In this research, we examined the adsorption of glyphosate onto montmorillonite in the presence of artificial seawater. Mössbauer data showed that the interaction of the phosphonate group of glyphosate with Fe²⁺ of montmorillonite prevents its oxidation to Fe³⁺. X-ray diffractograms showed that glyphosate adsorption takes place only onto the montmorillonite surface and not in its interlayers. Infrared spectroscopy data demonstrate that the interaction between glyphosate and montmorillonite could be through the amino group. FT-IR spectra of aqueous solutions of salts of seawater showed that Ca²⁺ interacts with glyphosate of the phosphonate group, thus causing an increase in its adsorption onto montmorillonite. However, glyphosate dissolved in 0.50 mol L⁻¹ NaCl and 0.034 mol L-1MgCl2 solutions showed the lowest adsorption onto montmorillonite. In addition, the adsorption of glyphosate onto montmorillonite decreased when the NaCl concentration increased. The results fitted the Sips isotherm model, probably because the Ca²⁺ interacts with glyphosate, making the adsorption process more homogeneous. Thus, n values for Freundlich and Sips isotherm models decreased with an increase in ionic strength. Glyphosate and ions of artificial seawater increased the pH_pzc of montmorillonite.

Adsorption of glyphosate on Brazilian subtropical soils rich in iron and aluminum oxides

We investigated the adsorption of glyphosate onto five subtropical soils of Paraná and São Paulo states, Brazil, a region of intense agricultural activities, aiming at the determination of kinetic and isotherm adsorption parameters which enable the evaluation of the potential leaching of the herbicide. The adsorption was fast, being described by the pseudo-second order and intraparticle diffusion models, thus suggesting that mixed mechanisms are involved. The Oxisol containing the highest concentrations of metal oxides (209.5 g kg-1 Fe2O3 and 160.2 g kg-1 Al2O3) was the sample with the highest rate constant, indicating the adsorption sites are readily available. All the soils are rich in aluminum and iron oxides, explaining the Freundlich coefficients (KF) between 642 and 1360 mg1-1/n kg-1 L1/n, which are higher than most of the coefficients described for other soils around the world. The maximum desorption (15% of the adsorbed amount) was observed for the Oxisol. For the other soils, desorption ranged from 2 to 7%. These results suggest that the leaching of free glyphosate to nearby surface and groundwaters is unlikely unless excessive doses are used. The adsorption parameters are useful for managing the right doses applied to the crops, thus avoiding contamination of adjacent areas.