Current concepts in locking plate fixation of proximal humerus fractures

Comparative finite element analysis: internal fixation plate versus intramedullary nail for neer type III-VI proximal humeral fractur

BACKGROUND

Finite element analysis (FEA) could advance the understanding of fracture fixation and guide the choice of surgical treatment. This study aimed to compare two internal fixation methods in the treatment of displaced proximal humeral fracture (PHF) through FEA.

METHODS

Three-dimensional FEA model based on the left shoulder joint of a 67-year-old female patient with PHFs and osteoporosis was adopted, in order to analyze the fixation effect and load stress distribution of internal fixation plates with open reduction and intramedullary nails without opening the fracture in the treatment of Neer III-VI PHF.

RESULTS

The displacement of the distal humerus with intramedullary nail fixation was more obvious than that of the distal humerus with bone plate fixation, and the resistance of intramedullary nail fixation was less than that of bone plate fixation under the same stress load. Maximum stress on the screw when adopting the intramedullary nail fixation was smaller than that when adopting the internal fixation with the internal fixation plates. The strain data indicate that the strain of both the fixation device and the bone when adopting the internal fixation with the intramedullary nails is less than that when adopting the internal fixation with the internal fixation plates.

CONCLUSIONS

Biomechanical analysis demonstrated that for complex fracture types with osteoporosis intramedullary nail system without opening the fracture had better stress dispersion than internal fixation plates with open reduction, and the risk of failure of central fixation was lower.

Biomechanical Principles of Intramedullary Nails in Veterinary and Human Medicine

Intramedullary nails are specialized metal rods inserted into the medullary cavity of a fractured bone and secured to reduce load on the fracture site, provide stability, and permit healing. The purpose of this review is to highlight the biomechanics of orthopaedic intramedullary nailing, as well as discuss the biomechanical considerations that have shaped implant design and fixation technique in veterinary and human medicine. Relevant studies were included from the PubMed database and Google Scholar for discussion on the basic science and nail design of intramedullary nails. Implant design and implementation continues to progress, with new innovative designs currently under investigation. A lack of consensus remains on the superior implant material. Recent studies, particularly in human populations, have supported the use of reaming based on reoperation rates, nonunion rates, and dynamization. Design modifications, such as the expandable intramedullary nails and angle-stable interlocking designs, have been investigated as methods of improving cortical contact and resisting torsional stress. Intramedullary nailing is a valuable stabilization technique for long bone fractures across a variety of species. The technology continues to undergo design improvements in both veterinary and human medicine.

Lateral Wall Integrity of the Greater Tuberosity Is Important for the Stability of Osteoporotic Proximal Humeral Fractures After Plate Fixation

BACKGROUND

Previous studies assessing surgical fixation of osteoporotic proximal humeral fractures have primarily focused on medial calcar support. In this study, we utilized a specific model for 2-part surgical neck fracture of the osteoporotic proximal humerus to investigate how severe comminution of the greater tuberosity (GT) lateral wall affects biomechanical stability after fixation with a plate.

METHODS

Ten matched pairs of cadaveric humeri (right and left) were assigned to either a surgical neck fracture alone (the SN group) or a surgical neck fracture with GT lateral wall comminution (the LW group) with use of block randomization. We removed 5 mm of the lateral wall of the GT to simulate severe comminution of the lateral wall. Axial compression stiffness, torsional stiffness, varus bending stiffness, and the single load to failure in varus bending were measured for all plate-bone constructs.

RESULTS

Compared with the SN group, the LW group showed a significant decrease in all measures, including torsional stiffness (internal, p = 0.007; external, p = 0.007), axial compression stiffness (p = 0.002), and varus bending stiffness (p = 0.007). In addition, the mean single load to failure in varus bending for the LW group was 62% lower than that for the SN group (p = 0.005).

CONCLUSIONS

Severe comminution of the GT lateral wall significantly compromised the biomechanical stability of osteoporotic, comminuted humeral surgical neck fractures.

CLINICAL RELEVANCE

Although the generalizability of this cadaveric model may be limited to the extreme clinical scenario, the model showed that severe comminution of the GT lateral wall significantly compromised the stability of osteoporotic humeral surgical neck fractures fixed with a plate and screws alone.

Clinical outcomes of a novel 'all-suture' fixation for valgus-impacted proximal humeral fractures

Background

Conventional techniques for the fixation of displaced proximal humeral fractures include the use of locking plates, intramedullary nailing, hemiarthroplasty and reverse shoulder replacement. Valgus-impacted fractures are a common subtype of proximal humeral fracture, but there are few publications concerning the outcomes of treatment. This study aims to review outcomes following an 'all-suture' technique for this fracture subtype without the use of transosseous sutures.

Methods

All patients over the age of 18 who presented with 3- or 4-part valgus-impacted proximal humeral fractures and who underwent 'all-suture' repair at our centre were included. We reviewed their post-operative imaging and collected data on post-operative complications and patient-reported outcome measures.

Results

We identified 15 patients who had undergone all-suture fixation. The cohort's mean age was 56. Eleven patients were female. Eight patients had 3-part fractures and seven patients had 4-part fractures. There were no major post-operative complications. All fractures united. The mean Oxford Shoulder Score was 43.7 and the mean Single Assessment Numerical Evaluation score was 85.9 at the final follow-up.

Discussion

Our results suggest that all-suture fixation of proximal humeral fractures presents an attractive alternative to conventional techniques, whilst avoiding complications relating to metalwork implantation.

Impact of augmentation strategy variations on the mechanical characteristics of patients with osteoporotic proximal humerus fractures with medial column instability

Introduction

Low bone density and lack of medial support are the two most important factors affecting the stability of locking plate fixation for osteoporotic proximal humeral fractures (PHFs). This study aimed to compare the biomechanical characteristics of PHILOS locking plates combined with calcar screws, bone cement, fibular allografts, and medial locking plate support strategies for treating osteoporotic PHFs with medial column instability.

Methods

A three-part osteoporotic PHF (AO 11-B3.2) model with metaphyseal loss was generated using 40 synthetic humeri and fixed via four distinct medial support strategies. All models were mechanically tested to quantify the mechanical characteristics. Subsequently, finite element models were created for each biomechanical test case. The stress distribution and displacement of the four different fixation structures were analyzed using finite element analysis.

Results

The results demonstrated that the PHILOS locking plate combined with the medial locking plate, exhibited the greatest stability when subjected to axial, shear, and torsional loading. Furthermore, the PHILOS locking plate combined with bone cement showed structural stability similar to that of the PHILOS locking plate combined with fibular allograft but with lower stress levels on the fracture surface.

Discussion

In conclusion, the PLP-MLP fixation structure showed superior biomechanical properties under axial, shear, and torsional loading compared to other medial support methods. Repairing the medial support when treating osteoporotic PHFs with medial column instability can enhance the mechanical stability of the fracture end in both the short and long term.

Patient satisfaction after removal of locking plates in proximal humeral fractures - worth the surgery under functional and cosmetic aspects?

Background

Locking plates are one of the most frequently used implants in surgical treatment of displaced proximal humeral fractures. In spite of this established implant and a standardized approach, reduced shoulder function might remain a mid-to long-term issue, furthermore scars may influence patient satisfaction as a cosmetic issue. Indications for a second surgery to remove implant and/or scar revision are common questions in this context.The aim of the present study was to assess the benefit of a second surgery, including implant removal and scar revision surgery, on patients' satisfaction under functional and cosmetic aspects.

Methods

Patients following displaced proximal humeral fractures treated by open reduction and internal fixation with a locking plate osteosynthesis via a delto-pectoral approach following implant removal were included retrospectively. A follow-up took place anamnestically before the incident or the primary surgery [A], before second surgery [B], and after second surgery (scar revision/implant removal) [C]. Functional outcome (Constant Score (CS)) of both shoulders was obtained using a patient-reported outcome measure to evaluate the contralateral side as well as percentage CS (%CS). Furthermore, the cosmetic outcome was evaluated for color, contour, and size.

Results

The clinical data of n = 81 patients with displaced proximal humeral fractures and the consecutive open reduction and internal fixation with a locking plate (51 women = 63.0% and 30 men = 37.0%; mean age: 53.7 ± 16.6 years) via a standardized deltopectoral approach could be included. The mean CS) before sustaining the humeral fracture or primary surgery [A] was anamnestically 85.8 ± 8.5 points and %CS 99.4 ± 8.4%. After open reduction and internal with a locking plate osteosynthesis [B], the mean CS was 72.2 ± 9.1 points and %CS 84.5 ± 8.7%. Following the scheduled implant removal and scar revision [C], the CS was 80 ± 13.1 points and %CS 92.3 ± 14.1%. After primary surgery, 26 patients (32.1%) complained about the scar because of color, contour, or size before the second surgery, and 23 patients (28.4%) afterwards.

Conclusion

Implant removal after locking plate osteosynthesis in proximal humeral fractures via a delto-pectoral approach leads to an improved outcome both functionally and cosmetically. CS as well as scar situation and patients' overall satisfaction could be improved with a second surgery. Nevertheless, the need for a second surgery depends on the patients' functional and cosmetic demands.

Intramedullary versus locking plate fixation for proximal humerus fractures: indications and technical considerations

Background

The incidence of proximal humerus fractures (PHFs) continues to increase with an aging population, and intramedullary nailing (IMN) and locking plate fixation are two commonly employed techniques for the surgical management of PHF. However, the optimal fixation method can be a source of ongoing controversy. Some influencing factors include the extent of humeral head involvement, fracture complexity, patient age, and surgeon preference. There are many studies that provide a mix of data either when comparing the two techniques or analyzing them in isolation. The aim of this review is to further elucidate the indications and technical considerations involved specifically in IMN vs. locking plate fixation for PHF to further aid orthopedic surgeons when choosing surgical management.

Methods

A narrative approach was chosen for this review allowing for a comprehensive review of literature, including recent findings pertaining to the comparison of management options for PHF. A comprehensive literature search was conducted using the PubMed, Embase, and Cochrane Library databases. The inclusion criteria involved studies that discussed "proximal humerus fracture" and either "intramedullary nail" or "locking plate fixation."

Results

Complications such as avascular necrosis, hardware failure, additional surgical interventions, infection, fracture redisplacement, rotator cuff rupture, and nonunion did not show significant differences between the two groups. Newer generation humeral nails have minimized early complications. As both techniques undergo further refinement and utilization when specifically indicated, functional outcomes, potential complications, and postoperative pain continue to be improved.

Conclusion

The available evidence suggests that both intramedullary nails and locking plates can effectively restore shoulder function in the treatment of displaced proximal humeral fractures, with unclear superiority of either method. The choice of technique should be tailored to patient factors such as fracture type, age, bone quality, and functional expectations. Surgeon experience also plays a role. While certain presentations may exhibit trends that favor one fixation, no specific technique can be universally recommended. Both IMN and LP have shown comparable and satisfactory outcomes, and the final fixation method chosen should take into account the unique characteristics of each patient.

Finite element analysis and biomechanical study of "sandwich" fixation in the treatment of elderly proximal humerus fractures

Proximal humerus fractures (PHFs) are common in the elderly and usually involve defects in the medial column.The current standard for medial column reconstruction is a lateral locking plate (LLP) in combination with either an intramedullary fibula support or an autogenous fibula graft. However, autogenous fibula graft can lead to additional trauma for patients and allogeneic fibular graft can increase patients' economic burden and pose risks of infection and disease transmission. The primary objective of this study was to introduce and assess a novel "Sandwich" fixation technique and compare its biomechanical properties to the traditional fixation methods for PHFs. In this study, we established finite element models of two different internal fixation methods: LLP-intramedullary reconstruction plate with bone cement (LLP-IRPBC) and LLP-intramedullary fibula segment (LLP-IFS). The biomechanical properties of the two fixation methods were evaluated by applying axial, adduction, abduction, torsional loads and screw extraction tests to the models. These FEA results were subsequently validated through a series of biomechanical experiments. Under various loading conditions such as axial, adduction, abduction, and rotation, the LLP-IRPBC group consistently demonstrated higher structural stiffness and less displacement compared to the LLP-IFS group, regardless of whether the bone was in a normal (Nor) or osteoporotic (Ost) state. Under axial, abduction and torsional loads, the maximum stress on LLPs of LLP-IRPBC group was lower than that of LLP-IFS group, while under adduction load, the maximum stress on LLPs of LLP-IRPBC group was higher than that of LLP-IFS group under Ost condition, and almost the same under Nor condition. The screw-pulling force in the LLP-IRPBC group was 1.85 times greater than that of the LLP-IFS group in Nor conditions and 1.36 times greater in Ost conditions. Importantly, the results of the biomechanical experiments closely mirrored those obtained through FEA, confirming the accuracy and reliability of FEA. The novel "Sandwich" fixation technique appears to offer stable medial support and rotational stability while significantly enhancing the strength of the fixation screws. This innovative approach represents a promising strategy for clinical treatment of PHFs.

Use of locking fibular plates versus non-locking dual plate fixation: A biomechanical study

Introduction

Distal fibula osteoporotic comminuted fractures are challenging to treat and are often treated with periarticular locking plates. This study examined the biomechanical difference between locked plating and dual non-locked one-third tubular plating.

Methods

Using an osteoporotic Sawbones fibula model, simulated fracture were fixated with one-third tubular dual plating and locked periarticular plating. The samples were then torqued to failure and peak torque, stiffness, and displacement were recorded.

Results

The peak torque of the dual plating group was found to be statistically higher than the periarticular locked plating group (0.841 Nm and 0.740 Nm respectively; p = 0.024). However overall stiffness calculated at each 10° increment of displacement was noted to have no significant difference between the two constructs.

Conclusion

Dual non-locked plating of distal fibula osteoporotic comminuted fractures is biomechanically equivalent to locked periarticular plating.

Finite element method analysis of bone stress for variants of locking plate placement

This study investigates the optimal placement of locking plate screws for bone fracture stabilization in the humerus, a crucial factor for enhancing healing outcomes and patient comfort. Utilizing Finite Element Method (FEM) modeling, the research aimed to determine the most effective screw configuration for achieving optimal stress distribution in the humerus bone. A computer tomography (CT) scan of the humerus was performed, and the resulting images were used to create a detailed model in SOLIDWORKS 2012. This model was then analyzed using ANSYS Workbench V13 to develop a finite element model of the bone. Four different screw configurations were examined: 4 × 0°, 4 × 10°, 4 × 20°, 2 × 20°; 2 × 0°. These configurations were subjected to bending in the XZ and YZ planes, as well as tension and compression along the Z axis. The research identified the 2 × 20°+2 × 0° configuration as the most beneficial, with average stress values below 30 MPa and peak stress values below 50 MPa in 3-point bending at the first screw. This configuration consistently showed the lowest stress values across all loading scenarios. Specifically, stress levels ranged from 20 MPa to 50 MPa for bending in the XZ plane, 20 MPa-35 MPa for bending in the YZ plane, 20 MPa-30 MPa for extension in the Z-axis, and 18 MPa-25 MPa for compression in the Z-axis. The 4 × 10° and 4 × 20° configurations also produced satisfactory results, with stress levels not exceeding 70 MPa. However, the 4 × 0° configuration presented considerable stress during bending and compression in the Z-axis, with stress values exceeding 100 MPa, potentially leading to mechanical damage. In conclusion, the 2 × 20°; 2 × 0° screw configuration was identified as the most effective in minimizing stress on the treated bone. Future work will involve a more detailed analysis of this methodology and its potential integration into clinical practice, with a focus on enhancing patient outcomes in bone fracture treatment.

Open reduction and internal fixation versus minimally invasive plate osteosynthesis of unstable proximal humerus fractures treated with locking plate and intramedullary allograft: A retrospective study

Background

This retrospective clinical study aims to compare the functional and radiological outcomes after open reduction and internal fixation versus minimally invasive plate osteosynthesis of unstable proximal humerus fractures treated with both locking plate and intramedullary graft.

Methods

Forty-seven patients with proximal humerus fractures were treated with either open reduction and internal fixation (25 cases) or minimally invasive plate osteosynthesis (22 cases) and evaluated retrospectively with a minimum follow-up of 12 months. Thirty-one fresh-frozen fibulae and 16 lyophilized tibia allografts were used for augmentation. Change of both neck-shaft angle and humeral head height were evaluated radiologically. Functional outcomes were assessed using Disabilities of the Arm, Shoulder and Hand Score (DASH), Absolute Constant-Murley Score (CSabs), Relative Constant-Murley Score (CSrel), and Individual Relative Constant-Murley Score (CSindiv).

Results

Follow-up period and age for open reduction and internal fixation/minimally invasive plate osteosynthesis were 27.4 ± 16.2/29.6 ± 17.6 months and 60.5 ± 13.7/66.3 ± 11.7 years. CSabs, CSrel, and CSindiv were 57.3 ± 21.2/52.4 ± 18.9, 73 ± 24.1/73.9 ± 23.4, and 69.6 ± 24.8/64 ± 25.5 for open reduction and internal fixation/minimally invasive plate osteosynthesis, p ≥ 0.409. DASH was 14.8 ± 12.5/18.7 ± 14.5 for open reduction and internal fixation/minimally invasive plate osteosynthesis, p = 0.324. Decrease of neck-shaft angle and humeral head height was 7.8 ± 9.4/8.2 ± 15.6° and 0.6 ± 5.5/1.4 ± 2.6 mm for open reduction and internal fixation/minimally invasive plate osteosynthesis, p ≥ 0.380. Surgical time was 165.8 ± 77.6/84.7 ± 38.1 min for open reduction and internal fixation/minimally invasive plate osteosynthesis, p < 0.001.

Conclusions

Locked plating with intramedullary graft augmentation of unstable proximal humerus fractures demonstrates similar functional and radiological outcomes when comparing open reduction and internal fixation with minimally invasive plate osteosynthesis. However, minimally invasive plate osteosynthesis is related to significantly shorter surgical time versus open reduction and internal fixation.

Valgising angular stable plate fixation in the treatment of multifragmentary proximal humeral fractures in elderly patients

INTRODUCTION

The frequency of proximal humeral fractures shows an increasing tendency, especially in the elderly, who are frequently affected by osteoporosis. The adequate treatment of complex, displaced fractures poses a serious challenge. Among surgical treatment options, osteosynthesis with an angular stable plate is preferred, however, the implant-related complication rate may be exceptionally high. In our present study, we report the short-term outcomes of our new method of valgising angular stable plate fixation which we use for multifragmentary, displaced proximal humeral fractures in elderly patients.

MATERIALS AND METHODS

We retrospectively evaluated the clinical and radiological outcomes of 52 patients (46 female and 6 male, age: 71.9 ± 9.6) who suffered dislocated three- or four-part fractures and underwent valgising angular stable plate fixation.

RESULTS

Mean follow-up time was 17.3 months, while the functional outcomes were as following: excellent in 26, good in 18, moderate in 5 and poor in 3 patients. The mean Constant-Murley Score was 82.5 ± 11.2. Functional outcomes only showed significant correlation (p = 0.031) with age and were proven unrelated to fracture type, BMI and known primary diseases. The cumulative complication rate was 9.6% and revision rate was 5.8%. Neurological deficit, pseudoarthrosis or avascular humeral head necrosis did not occur during the follow-up period.

CONCLUSIONS

Valgising angular stable plate fixation that we apply for proximal humeral fractures provided favourable functional outcomes and a low postoperative complication rate due to the optimal head and plate placement. The method is especially effective for the treatment of displaced three- and four-part fractures with weakened, osteoporotic bone structure.

Comparative analysis of proximal humerus fracture management in elderly patients: complications of open reduction and internal fixation by shoulder surgeons and non-shoulder surgeons-a retrospective study

BACKGROUND

Open reduction and internal fixation (ORIF) with a locking plate is a popular surgical treatment for proximal humeral fractures (PHF). This study aimed to assess the occurrence of complications in elderly patients with PHF treated surgically using ORIF with a locking plate and to investigate the potential differences between patients treated by shoulder surgeons and non-shoulder surgeons.

METHODS

A retrospective study was conducted using a single-center database to identify patients aged ≥70 years who underwent ORIF for PHF between January 1, 2011, and December 31, 2021. Data on the Neer classification, follow-up, occurrence of avascular necrosis of the humeral head, implant failure, and revision surgery were also collected. Statistical analyses were performed to calculate the overall frequency of complications according to the Neer classification.

RESULTS

The rates of implant failure, avascular osteonecrosis, and revision surgery were 15.7%, 4.8%, and 15.7%, respectively. Complications were more common in patients with Neer three- and four-part fractures. Although the difference between surgeries performed by shoulder surgeons and non-shoulder surgeons did not reach statistical significance, the rate of complications and the need for revision surgery were nearly two-fold higher in the latter group.

CONCLUSIONS

PHF are highly prevalent in the elderly population. However, the ORIF surgical approach, as demonstrated in this study, is associated with a considerable rate of complications. Surgeries performed by non-shoulder surgeons had a higher rate of complications and a more frequent need for revision surgery. Future studies comparing surgical treatments and their respective complication rates are crucial to determine the optimal therapeutic options. Level of evidence: III.

Biomechanical design optimization of proximal humerus locked plates: A review

BACKGROUND

Proximal humerus locked plates (PHLPs) are widely used for fracture surgery. Yet, non-union, malunion, infection, avascular necrosis, screw cut-out (i.e., perforation), fixation failure, and re-operation occur. Most biomechanical investigators compare a specific PHLP configuration to other implants like non-locked plates, nails, wires, and arthroplasties. However, it is unknown whether the PHLP configuration is biomechanically optimal according to some well-known biomechanical criteria. Therefore, this is the first review of the systematic optimization of plate and/or screw design variables for improved PHLP biomechanical performance.

METHODS

The PubMed website was searched for papers using the terms "proximal humerus" or "shoulder" plus "biomechanics/biomechanical" plus "locked/locking plates". PHLP papers were included if they were (a) optimization studies that systematically varied plate and screw variables to determine their influence on PHLP's biomechanical performance; (b) focused on plate and screw variables rather than augmentation techniques (i.e., extra implants, bone struts, or cement); (c) published after the year 2000 signaling the commercial availability of locked plate technology; and (d) written in English.

RESULTS

The 41 eligible papers involved experimental testing and/or finite element modeling. Plate variables investigated by these papers were geometry, material, and/or position, while screw variables studied were number, distribution, angle, size, and/or threads. Numerical outcomes given by these papers included stiffness, strength, fracture motion, bone and implant stress, and/or the number of loading cycles to failure. But, no paper fully optimized any plate or screw variable for a PHLP by simultaneously applying four well-established biomechanical criteria: (a) allow controlled fracture motion for early callus generation; (b) reduce bone and implant stress below the material's ultimate stress to prevent failure; (c) maintain sufficient bone-plate interface stress to reduce bone resorption (i.e., stress shielding); and (d) increase the number of loading cycles before failure for a clinically beneficial lifespan (i.e., fatigue life). Finally, this review made suggestions for future work, identified clinical implications, and assessed the quality of the papers reviewed.

CONCLUSIONS

Applying biomechanical optimization criteria can assist biomedical engineers in designing or evaluating PHLPs, so orthopaedic surgeons can have superior PHLP constructs for clinical use.

Cyclic Stability of Locking Plate Augmented with Intramedullary Polymethyl Methacrylate (PMMA) Strut Fixation for Osteoporotic Humeral Fractures: A Biomechanical Study

The locking plate may provide improved fixation in osteoporotic bone; however, it has been reported to fail due to varus collapse or screw perforation of the articular surface, especially in osteoporotic bone with medial cortex comminution. Using bone graft as an intramedullary strut together with plate fixation may result in a stronger construct. However, the drawbacks of bone grafts include limited supply, high cost, and infection risk. PMMA (so-called bone cement) has been widely used for implant fixation due to its good mechanical properties, fabricability, and biocompatibility. The risk of donor-site infection and the drawbacks of allografting may be overcome by considering PMMA struts as alternatives to fibular grafts for humeral intramedullary grafting surgeries. However, the potential effects of intramedullary PMMA strut on the dynamic behaviour of osteoporotic humerus fractures remain unclear. This study aimed to investigate the influence of an intramedullary PMMA strut on the stability of unstable proximal humeral fractures in an osteoporotic synthetic model. Two fixation techniques, a locking plate alone (non-strut group) and the same fixation augmented with an intramedullary PMMA strut (with-strut group), were cyclically tested in 20 artificial humeral models. Axially cyclic testing was performed to 450 N for 10,000 cycles, intercyclic motion, cumulated fragment migration, and residual deformation of the constructs were determined at periodic cyclic intervals, and the groups were compared. Results showed that adding an intramedullary PMMA strut could decrease 1.6 times intercyclic motion, 2 times cumulated fracture gap migration, and 1.8 times residual deformation from non-strut fixation. During cycling, neither screw pull-out, cut-through, nor implant failure was observed in the strut-augmented group. We concluded that the plate-strut mechanism could enhance the cyclic stability of the fixation and minimize the residual displacement of the fragment in treating osteoporotic proximal humeral unstable fractures. The PMMA strut has the potential to substitute donor bone and serve as an intramedullary support when used in combination with locking plate fixation. The intramedullary support with bone cement can be considered a solution in the treatment of osteoporotic proximal humeral fractures, especially when there is medial comminution.

Correct positioning of the calcar screw leads to superior results in proximal humerus fractures treated with carbon-fibre-reinforced polyetheretherketone plate osteosynthesis with polyaxial locking screws

BACKGROUND

Plate osteosynthesis with implants made of carbon-fibre-reinforced polyetheretherketone (CFR-PEEK) has recently been introduced for the treatment of fractures of the proximal humerus (PHFs). The advantages of the CFR-PEEK plate are considered to be its radiolucency, its favourable modulus of elasticity, and the polyaxial placement of the screws with high variability of the angle. The primary aim of this study is to investigate the influence of calcar screw positioning on the complication and revision rates after CFR-PEEK plating of PHFs. The secondary aim is to assess its influence on functional outcome.

MATERIAL AND METHODS

Patients were identified retrospectively. Minimum follow-up was 12 months. The cohort was divided into two groups depending on the distance of the calcar screw to the calcar (group I: < 12 mm, group II: ≥ 12 mm). The range of motion (ROM), Subjective Shoulder Value Score (SSV) and Constant-Murley Score (CS) were analysed at follow-up examination. Subjective complaints, complications (e.g. humeral head necrosis, varus dislocation) and the revision rate were evaluated.

RESULTS

51 patients (33 female, 18 male) with an average age of 68.6 years were included after a period of 26.6 months (group I: 32 patients, group II: 19 patients). Apart from the gender distribution, no significant differences were seen in the patient characteristics. The outcome scores showed significantly better clinical results in group I: SSV 83.4 vs 71.2, p = 0.007; CS 79.1 vs 67.8, p = 0.013. Complications were seen less frequently in group I (18.8 % vs 47.4 %, p = 0.030).

CONCLUSION

This study shows that the positioning of the calcar screw is relevant for CFR-PEEK plate osteosynthesis in PHFs with a good reduction of the fracture. Optimal positioning of the calcar screw close to the calcar (< 12 mm) is associated with a lower rate of complications, resulting in significantly superior functional outcomes.

LEVEL OF EVIDENCE

III, retrospective cohort study.

Fracture line and comminution zone characteristics, and rotator cuff footprint involvement in OTA/AO 11C3-type proximal humeral fractures: complex proximal humerus fracture map

PURPOSE

To identify fracture characteristics and zones of comminution as well as the relationship with anatomic landmarks and rotator cuff footprint involvement in OTA/AO 11C3-type proximal humerus fractures.

METHODS

Computed tomography images of 201 OTA/AO 11C3 fractures were included. Fracture lines were superimposed to a 3D proximal humerus template, created from a healthy right humerus, after fracture fragment reduction on 3D reconstruction images. Rotator cuff tendon footprints were marked on the template. Lateral, anterior, posterior, medial, and superior views were captured for the interpretation of fracture line and comminution zone distribution as well as to define the relationship with anatomic landmarks and rotator cuff tendon footprints.

RESULTS

A total of 106 females and 95 males (mean age = 57.5 ± 17.7 [range 18-101] years) with 103 C3.1-, 45 C3.2-, and 53 C3.3-type fractures were included. On the lateral, medial, and superior humeral surfaces, fracture lines and comminution zones were distributed differently in 3 groups. Tuberculum minus and medial calcar region were significantly less severely affected in C3.1 and C3.2 fractures than C3.3 fractures. The supraspinatus footprint was the most severely affected rotator cuff footprint area.

CONCLUSIONS

Specifically defining the certain differences for repeatable fracture patterns and comminution zones in OTA/AO 11C3-type fractures and the relationship between the rotator cuff footprint and the joint capsule may contribute to the decision-making process of surgeons.

"Mother and baby plate": a strategy to improve stability in proximal fractures of the ulna

INTRODUCTION

Proximal ulna fractures with a large zone of comminution, such as in the context of Monteggia injuries, require mechanically strong osteosyntheses as they occur in regions with high physiological joint load. Consequently, implant failure and pseudarthrosis are critical and devastating complications, especially with the background of mainly young patients being affected. An effective solution could be provided by adding a small second plate 90° angulated to the standard dorsal plate in the area of non-union. Thus, this study investigates whether, from a biomechanical point of view, the use of such a mini or baby plate is worthwhile.

MATERIALS AND METHODS

Comminuted fractures distal to the coronoid process, equivalent to Jupiter type IIb fractures, are generated on artificial Sawbones® of the ulna and stabilized using two different plate osteosyntheses: in the first group, a dorsal locking compression olecranon plate is used (LCP group). In the second group, a small, ulnar 5-hole olecranon plate is added as a baby plate in addition to the mother plate at the level of the fracture zone (MBP group). Dynamic biomechanical loading in degrees of flexion from 0° to 90° is carried out to determine yield load, stiffness, displacement, and changes in fracture gap width as well as bending of the dorsal plate.

RESULTS

The "mother-baby-plate" osteosynthesis had a significantly higher yield load (p < 0.01) and stiffness (p = 0.01) than the LCP group. This correlates with the increased movement of the proximal fracture element during cyclic testing for the LCP group compared to the MBP group as measured by an optical metrology system.

CONCLUSIONS

Here, we show evidence that the addition of a small plate to the standard plate is highly effective in increasing the biomechanical stability in severe fractures equivalent to Jupiter type IIb. As it hopefully minimizes complications like pseudarthrosis and implant failure and as the additional preparatory effort leading to compromised blood supply is regarded to be negligible, this justifies and highly advises the use of a mother-baby-plate system.

Short-term Clinical Outcome of Dual Plate Fixation in the Treatment of Proximal Humerus Fractures with Calcar Comminution

OBJECTIVE

Calcar comminution has been considered to be the main cause of the failure of internal fixation and fracture nonunion in proximal humerus surgery. Anatomical reduction and increasing the strength of internal fixation is the key to success. The purpose of this study was to investigate the short-term clinical effect of dual plate fixation in the treatment of proximal humeral fractures with calcar comminution.

METHODS

The data of 37 patients with proximal humeral fractures with calcar comminution, treated in our departments from July 2018 to April 2020, were retrospectively analyzed. These patients were treated with anterior plate and lateral PHILOS plate, and followed up for more than 12 months, including 25 cases in Tianjin Hospital and 12 cases in Shanghai General Hospital. The patients included 12 males and 25 females, their age was 54.89 ± 13.59 years (range from 32-79 years), and 21 patients had dominant hand injury. According to the Neer classification, there were 11 two-part fractures, 22 three-part fractures, and four four-part fractures. The range of motion of the shoulder joint, visual analog scale (VAS), American Shoulder and Elbow Surgeons Shoulder Score (ASES), Constant-Murley shoulder score, neck-shaft angle, anterior-posterior angle, and other complication scores were recorded at the last follow-up.

RESULTS

All 37 patients were followed up after operation, and the follow-up time was 21.81 ± 7.35 months (range from 12-36 months). The fractures of all 37 patients had healed at the last follow-up visit. The neck-shaft angle measured immediately after operation was 132.59° ± 8.34°, and the neck-shaft angle measured at the last follow-up visit was 132.38 ± 8.53°. The anterior-posterior angle measured immediately after surgery was 3.45° ± 0.81°, and the anterior-posterior angle at the last follow-up visit was 3.66° ± 0.77°. The range of motion of the shoulder joint was as follows: the shoulder joint could be forward elevated by 158.11° ± 13.09° (range: 140°-180°), rotated externally by 38.38° ± 7.55° (range: 20°-45°), and internally rotated to T4-L4 level. The VAS score was 0.46 ± 0.87 (range: 0-3), the ASES was 86.58 ± 8.79 (range: 56.7-100), and the Constant-Murley score was 88.76 ± 8.25 (range: 60-100). Thirty-three cases were excellent, and four cases were good. No obvious complications occurred.

CONCLUSION

The combination of anterior plate and lateral PHILOS plate in the treatment of proximal humeral fractures with calcar comminution can achieve stable fixation, and the postoperative clinical and imaging outcome was satisfactory. Firstly, the anterior plate can provide temporary stability when the Kirschner wires are removed, which can provide space for lateral plate placement during fracture reduction and fixation. Secondly, additional support by the anterior plate can provide higher stability in complex fractures with calcar comminution.

Dynamic biomechanical investigation of a novel sulcus bicipitalis plate in combination with a conventional locking plate for the treatment of complex proximal humerus fractures

BACKGROUND

Complex proximal humerus fractures place high demands on osteosynthetic treatment. In some cases, double plating has already been used to increase primary stability of the osteosynthesis. This approach was advanced in the present study by developing an additive plate for the sulcus bicipitalis. To demonstrate the superior primary stability of the newly developed plate osteosynthesis, a biomechanical comparison against a conventional locking plate with an additional calcar screw was performed.

METHODS

Ten pairs of cadaveric humeri were treated proximally with a locking plate (PENTA plate small fragment, INTERCUS). Each had a two-part fracture model with a fracture gap of 10 mm. All right humeri were treated with an additive novel plate that extends along the bicipital sulcus and encircles the lesser tuberosity proximally. First, the specimens were loaded sinusoidally at 250 N in 20° abduction for 5000 cycles. Afterwards quasi-static loading until failure was applied.

FINDINGS

The movement at the fracture gap due to the cyclic loading occurred mainly as rotation around the z-axis, corresponding to a tilt medially and distally. The double plate osteosynthesis reduces the rotation by approximately 39%. For all load cycles observed, except 5000 cycles, medial and distal rotation of the head was significantly reduced by the double plate. The failure loads showed no significant differences between the groups.

INTERPRETATION

In the tested scenario under cyclic loading, the novel double plate osteosynthesis showed a significant superiority of primary stability over the conventional treatment with one locking plate. Furthermore, the study showed the advantages of cyclic load application over quasi-static load application until failure.

Complications of Locked Plating for Proximal Humeral Fractures in Active Patients in a Level One Trauma Center

Background

The incidence of complications associated with locked plating of proximal humerus fractures (PHF) has been reported in up to 40% of surgeries. This study aimed to analyze the incidence and risk factors of complications and re-intervention associated with locked plating of PHF in a an young active working population.

Methods

This retrospective cohort study included patients indicated for locked plating of displaced PHF at a dedicated workers' accident trauma center. The variables analyzed were patient comorbidities, fracture characteristics, and immediate radiologic surgical outcomes. Postoperative complications and risk factors were determined.

Results

A total of 127 patients with a median follow-up of 31 months and a median age of 52 years were included. The complication and reintervention rates were 13.4% and 12.6%, respectively. The main cause of reintervention was post-traumatic stiffness. The incidence of other complications was 4% screw protrusion, 1.6% avascular necrosis, 1.6% varus collapse. Complications were not associated with age, comorbidity, fracture classification, bone mineral density, Hertel's risk factors, presence of calcar comminution, reduction quality, and calcar screw position.

Discussion

The incidence of complications and reintervention was low. The main cause of reintervention was persistent stiffness, and no risk factors for complications were found in this study.

It Is Always the Same—A Complication Classification following Angular Stable Plating of Proximal Humeral Fractures

Introduction: The aim of this study was to create a novel complication classification for osteosynthesis-related complications following angular stable plating of the proximal humerus subsuming the influence of these complications on clinical outcome in relation to fracture morphology and consequent revision strategies. A total of 1047 proximal humerus fractures with overall 193 osteosynthesis-associated complications (24.5%) were included. The following complication types could be clarified: complication Type 1 is defined by mild varus (<20°) or valgus displacement of the humeral head without resulting in a screw cutout through the humeral head cortex. Type 2a is defined by varus displacement (<20°) of the humeral head associated with screw cutout through the humeral head cortex. Type 2b complication is limited to displacement of the greater tuberosity, lesser tuberosity, or both tuberosities. Complication Type 2c is defined by severe varus dislocation (>20°) of the humeral head with screw cutout at the humeral head cortex. Complication Type 3 describes a displacement of the angular stable plate in the humeral shaft region with associated shaft-sided screw cutout, while the position of the humeral head remains static. Complication Type 4 is characterized by the occurrence of AVN with or without glenoidal affection (4a/b). Clinical outcome according to the constant score was mainly affected by type 2–4, leading to a deteriorated result. Depending on the type of complication, specific revision strategies can be considered. Additionally, more complex fracture patterns fostered the incidence of complications.

The biomechanical effect of fibular strut grafts on humeral surgical neck fractures with lateral wall comminution

No studies have evaluated the effect of fibular strut augmentation on the stability of locking plate fixation for osteoporotic proximal humeral fractures with lateral wall comminution. The purpose of this study was to evaluate the stability of locking plate fixation with a fibular strut graft compared with locking plate alone in an osteoporotic two-part surgical neck fracture model with lateral cortex comminution. Ten paired fresh-frozen cadaveric humeri were randomly allocated into two groups, either the locking plate alone (LP group) or locking plate with fibular strut graft augmentation (LPFSG group), with an equal number of right and left osteoporotic surgical neck fractures with lateral wall comminution of the greater tuberosity. Varus, internal/external torsion, and axial compression stiffness as well as single load to failure were measured in plate-bone constructs, and the LPFSG group showed significantly greater values in all metrics. In conclusion, this biomechanical study shows that fibular strut augmentation significantly enhances varus stiffness, internal torsion stiffness, external torsion stiffness, and maximum failure load of a construct compared to locking plate fixation alone in proximal humeral fractures with lateral wall comminution.

Treatment Reality of Proximal Humeral Fractures in the Elderly-Trending Variants of Locking Plate Fixation in Germany

BACKGROUND

The surgical treatment of proximal humeral fractures (PHFs) with locking plate fixation (LPF) in the elderly is associated with high complication rates, especially in osteoporotic bone. Variants of LPF such as additional cerclages, double plating, bone grafting and cement augmentation can be applied. The objective of the study was to describe the extent of their actual use and how this changed over time.

METHODS

Retrospective analysis of health claims data of the Federal Association of the Local Health Insurance Funds was performed, covering all patients aged 65 years and older, who had a coded diagnosis of PHF and were treated with LPF between 2010 and 2018. Differences between treatment variants were analyzed (explorative) via chi-squared or Kruskal-Wallis tests.

RESULTS

Of the 41,216 treated patients, 32,952 (80%) were treated with LPF only, 5572 (14%) received additional screws or plates, 1983 (5%) received additional augmentations and 709 (2%) received a combination of both. During the study period, relative changes were observed as follows: -35% for LPF only, +58% for LPF with additional fracture fixation and +25% for LPF with additional augmentation. Overall, the intra-hospital complication rate was 15% with differences between the treatment variants (LPF only 15%, LPF with additional fracture fixation 14%, LPF with additional augmentation 19%; p < 0.001), and a 30-day mortality of 2%.

CONCLUSIONS

Within an overall decrease of LPF by approximately one-third, there is both an absolute and relative increase of treatment variants. Collectively, they account for 20% of all coded LPFs, which might indicate more personalized treatment pathways. The leading variant was additional fracture fixation using cerclages.

Risk factors for loss of reduction following locked plate fixation of proximal humerus fractures in older adults

PURPOSE

To identify characteristics associated with loss of reduction following open reduction and locked plate fixation (ORIF) of proximal humerus fractures in older adults and determine if loss of reduction affects patient reported outcomes (PROs), range of motion (ROM), and complication rates during the first postoperative year.

METHODS

Patients >55 years old who underwent proximal humerus ORIF were reviewed. Patient and fracture characteristics were recorded. Fixation characteristics were measured on the initial postoperative AP radiograph including humeral head height (HHH) relative to the greater tuberosity (GT), head shaft angle (HSA), screw-calcar distance, and screw tip-joint surface distance. Loss of reduction was defined as GT displacement >5 mm or HSA displacement >10° on final follow up radiographs. Patient, fracture, and fixation characteristics were tested for association with loss of reduction. Outcomes including ROM, visual analog scale pain and PROMIS scores, and complication/reoperation rates during the first postoperative year were compared between those with or without loss of reduction.

RESULTS

A total of 79 patients were identified, 23 (29.1%) of which had a loss of reduction. Calcar comminution (relative risk [RR]=2.5, 95% Confidence Interval [CI]=1.3-5.0, p<0.01), HHH <5 mm above GT (RR=2.0, CI=1.0-3.9, p = 0.048), and screw-calcar distance ≥12 mm (RR=2.1, CI=1.1-4.1, p = 0.03) were risk factors for loss of reduction. Upon multivariate analysis, calcar comminution was determined to be an independent risk factor for loss of reduction (RR=2.4, CI=1.2-4.7, p = 0.01). Loss of reduction led to higher complication (44% vs 13%, p<0.01) and reoperation rates (30% vs 7%, p<0.01), and decreased achievement of satisfactory ROM (>90° active forward flexion, 57% vs 82%, p = 0.02) compared to maintained reduction, but similar PROs.

CONCLUSIONS

Calcar comminution, decreased HHH, and increased screw-calcar distance are risk factors for loss of reduction following ORIF of proximal humerus fractures. These morphologic and technical factors are important considerations for prolonged reduction maintenance.

Functional results and unfavorable events after treatment of proximal humerus fractures using a new locking plate system

BACKGROUND

Proximal humerus fractures are often treated with a fixed-angle titanium plate osteosynthesis. Recently, plates made of alternative materials such as carbon fibre-reinforced polyetheretherketone (CFR-PEEK) have been introduced. This study presents the postoperative results of patients treated with a CFR-PEEK plate.

METHODS

Patients with proximal humerus fractures treated with a CFR-PEEK plate (PEEKPower™ Humeral Fracture Plate (HFP)) were included. In follow-up examination, age and gender adjusted Constant-Murley Score (ACS), Subjective Shoulder Value (SSV), Quick Disabilities of the Arm, Shoulder and Hand Score (QDASH) and pain score (Visual Analog Scale (VAS)) were analyzed. General condition at follow-up was measured by European Quality of Life 5 Dimensions 3 Level Version (EQ-5D-3L). Range of motion was recorded. In addition, radiographs at follow-up, unfavorable events and revision rate were analyzed.

RESULTS

In total, 98 patients (66.0 ± 13.2 years, 74 females, 24 males) were reexamined. Mean follow-up was 27.6 ± 13.2 months. There were 15 2-part, 28 3-part and 55 4-part fractures. The functional scores showed good results: SSV 83.3 ± 15.6%, QDASH 13.1 ± 17.0 and ACS 80.4 ± 16.0. A 4-part-fracture, head split component, nonanatomic head shaft reposition and preoperative radiological signs of osteoarthritis were significant negative predictors for poorer clinical scores. Unfavourable events were observed in 27 patients (27.6%). Revision surgery was performed in 8 (8.2%) patients. Risk factors for an unfavourable event were female gender, age of 50 years and older, diabetes, affected dominant hand, 4-part fracture, head split and preoperative radiological signs of osteoarthritis.

CONCLUSION

There are several advantages of the CFR-PEEK plate (PEEKPower™ Humeral Fracture Plate (HFP)) such as the polyaxial screw placement and higher stability of locking screws. In summary, the CFR-PEEK plate osteosynthesis is a good alternative with comparable clinical results and some biomechanical advantages. Proximal humerus fractures show good clinical results after treatment with a CFR-PEEK plate. The revision rate and the risk of unfavorable events are not increased compared to conventional titanium plate osteosynthesis.

LEVEL OF EVIDENCE

IV.

Continuous Shoulder Activity Tracking after Open Reduction and Internal Fixation of Proximal Humerus Fractures

Postoperative shoulder activity after proximal humerus fracture treatment could influence the outcomes of osteosynthesis and may depend on the rehabilitation protocol. This multi-centric prospective study aimed at evaluating the feasibility of continuous shoulder activity monitoring over the first six postoperative weeks, investigating potential differences between two different rehabilitation protocols. Shoulder activity was assessed with pairs of accelerometer-based trackers during the first six postoperative weeks in thirteen elderly patients having a complex proximal humerus fracture treated with a locking plate. Shoulder angles and elevation events were evaluated over time and compared between the two centers utilizing different standard rehabilitation protocols. The overall mean shoulder angle ranged from 11° to 23°, and the number of daily elevation events was between 547 and 5756. Average angles showed longitudinal change <5° over 31 ± 10 days. The number of events increased by 300% on average. Results of the two clinics exhibited no characteristic differences for shoulder angle, but the number of events increased only for the site utilizing immediate mobilization. In addition to considerable inter-patient variation, not the mean shoulder angle but the number of elevations events increased markedly over time. Differences between the two sites in number of daily events may be associated with the different rehabilitation protocols.

Clinical and Radiological Outcome of Dual Plating for Proximal Humerus Fractures

Introduction Proximal humerus fractures account for approximately 4%-5% of all fractures. It accounts for approximately 45% of all humeral fractures. Proximal humerus fractures which are mostly stable or minimally displaced fractures are usually managed non-operatively with good outcomes. Displaced or unstable fractures may require reduction and stabilization. For proximal humerus fractures, conservative treatments often result in stiffness and malunion of the shoulder. In comminuted proximal humerus fractures the use of a proximal humeral internal locking system (PHILOS) only does not provide the required stable fixation which usually leads to complications such as varus collapse, malunion, anterior-posterior angulation, screw cutout, metal failure and nonunion and thus open reduction and internal fixation with dual plating are recommended for proximal humerus fractures. Material and methods The Institutional Ethics Committee of Dr. D. Y. Patil Vidyapeeth in Pune approved this prospective study. We included a sample size of 52 patients and conducted a study on these patients who were admitted under the Orthopedics department at Dr. D. Y. Patil Medical College and Hospital, Pune. Results In this study, 52 patients were treated with dual plating for proximal humerus fracture, an additional plate is used along with PHILOS. In our study, the majority of the study population belonged to > 50 years (34.6%), followed by 41-50 years (26.9%), 31-40 years (23.1%), and 21-30 years (15.4%). The mean age of the patient was 53.7 years including 33 male and 19 female patients. The majority of the patient in the study included was with RTA 40 patients and 12 patients with a history of falls from height. The fracture was classified using Neers classification, Neer type 2 fracture (23.1%), Neer type 3 fracture (46.2%), and Neer type 4 fracture (30.7%). In the current study, the mean DASH score at Baseline was 58.88±6.29, at three months was 36.23±5.05 and at six months was 31.85±4.16. The mean DASH score decreased significantly from baseline to three months to 6 months. As per the Paavolainen method, it was good among 40 (76.9%) and fair among 10 (19.2%), and poor among two (3.8%) cases. Out of 52 patients, we found varus collapse in immediate postop x-ray in two patient and screw protrusion in the glenohumeral joint in one patient. Conclusion Satisfactory clinical and radiological outcomes were noted. This dual mechanism prevents varus displacement of the proximal fragment, and as a result, it provides a good functional outcome with dual plates in proximal humerus fractures.

Treatment of proximal humerus fractures using reverse shoulder arthroplasty: do the inclination of the humeral component and the lateral offset of the glenosphere influence the clinical outcome and tuberosity healing?

INTRODUCTION

The employment of reverse shoulder arthroplasty for dislocated proximal humerus fractures of elderly patients becomes increasingly relevant. The standard inclination angle of the humeral component was 155°. Lately, there is a trend towards smaller inclination angles of 145° or 135°. Additionally, there has been an increased focus on the lateralization of the glenosphere. This retrospective comparative study evaluates clinical and radiological results of patients treated for proximal humerus fractures by reverse shoulder arthroplasty with different inclination angles of the humeral component, which was either 135° or 155°. Additionally, a different lateral offset of the glenosphere, which was either 0 mm or 4 mm, was used.

METHODS

For this retrospective comparative analysis, 58 out of 66 patients treated by reverse total shoulder arthroplasty for proximal humerus fractures were included. The minimum follow-up was 24 months. Thirty (m = 3, f = 27; mean age 78 years; mean FU 35 months, range 24-58 months) were treated with a standard 155° humeral component and a glenosphere without lateral offset (group A), while 28 patients (m = 2, f = 26; mean age 79 years; mean FU 30 months, range 24-46 months) were treated with a 135° humeral component and a glenosphere with a 4 mm lateral offset (group B). We determined range of motion, Constant score, and the American Shoulder and Elbow Surgeons Shoulder score as clinical outcomes and evaluated tuberosity healing as well as scapula notching.

RESULTS

Neither forward flexion (A = 128°, B = 121°; p = 0.710) nor abduction (A = 111°, B = 106°; p = 0.327) revealed differences between the groups. The mean Constant Score rated 63 in group A, while it was 61 in group B (p = 0.350). There were no differences of the ASES Score between the groups (A = 74, B = 72; p = 0.270). There was an increased risk for scapula notching in group A (47%) in comparison to group B (4%, p = 0.001). Healing of the greater tuberosity was achieved in 57% of group A and in 75% of group B (p = 0.142). The healing rate of the lesser tuberosity measured 33% in group A and 71% in group B (p = 0.004).

CONCLUSIONS

Both inclination angles of the humeral component are feasible options for the treatment of proximal humerus fractures in elderly patients. Neither the inclination angle nor the lateral offset of the glenosphere seem to have a relevant influence on the clinical outcome. The healing rate of the lesser tuberosity was higher in implants with a decreased neck-shaft angle. There is an increased risk for scapula notching, if a higher inclination angle of the humeral component is chosen.

LEVEL OF EVIDENCE

III. Retrospective comparative study.

Feasibility and Radiological Outcome of Minimally Invasive Locked Plating of Proximal Humeral Fractures in Geriatric Patients

BACKGROUND

Proximal humerus fractures are common injuries in the elderly. Locked plating showed high complication and reoperation rates at first. However, with second-generation implants and augmentation, minimally invasive locked plating might be a viable alternative to arthroplasty or conservative treatment.

MATERIAL AND METHODS

A retrospective chart review was performed for all patients with proximal humerus fractures treated between 2014 and 2020 with locked plating. All patients over 60 years of age who underwent surgery for a proximal humerus fracture with plate osteosynthesis (NCB, Philos, or Philos with cement) during the specified period were included. Pathological fractures, intramedullary nailing, or arthroplasty were excluded. Primary outcome measurements included secondary displacement and surgical complications. Secondary outcomes comprised function and mortality within one year.

RESULTS

A total of 249 patients (mean age 75.6 +/- 8.9 years; 194 women and 55 men) were included in the study. No significant difference in the AO fracture classification could be found. Ninety-two patients were surgically treated with first-generation locked plating (NCB, Zimmer Biomet, Wayne Township, IN, USA), 113 patients with second-generation locked plating (Philos, Depuy Synthes, Wayne Township, IN, USA), and 44 patients with cement-augmented second-generation locked plating (Philos, Traumacem V+, Depuy Synthes). A 6-week radiological follow-up was completed for 189 patients. In all groups, X-rays were performed one day after surgery, and these showed no differences concerning the head shaft angle between the groups. The mean secondary varus dislocation (decrease of the head shaft angle) after six weeks for first-generation locked plating was 6.6 ± 12° (n = 72), for second-generation locked plating 4.4 ± 6.5 (n = 83), and for second-generation with augmentation 1.9 ± 3.7 (n = 35) with a significant difference between the groups (p = 0.012). Logistic regression showed a significant dependency for secondary dislocation for the type of treatment (p = 0.038), age (p = 0.01), and preoperative varus fracture displacement (p = 0.033). Significantly fewer surgical complications have been observed in the augmented second-generation locked plating group (NCB: 26.3%; Philos 21.5%; Philos-augmented 8.6%; p = 0.015). Range of motion was documented in 122 out of 209 patients after 3 months. In the Philos-augmented group, 50% of the patients achieved at least 90° anteversion and abduction, which was only about a third of the patients in the other 2 groups (NCB 34.8%, n = 46; Philos 35.8%, n = 56; augmented-Philos 50.0%, n = 20; p = 0.429).

CONCLUSION

Minimally invasive locked plating is still a valuable treatment option for geriatric patients. With augmentation and modern implants, the complication rate is low and comparable to those of reverse shoulder arthroplasty reported in the literature, even in the challenging group of elderly patients.

Role of Fibular Allograft in Proximal Humerus Fractures: A Systematic Review

OBJECTIVES

To analyze the outcomes and complication rates of fibular allografts (FA) as an augmentation technique for proximal humeral fractures and determine their appropriate indications.

DATA SOURCES

English- and Spanish-language articles in PubMed, MEDLINE, Embase, Web of Science (Core Collection), and Google Scholar databases were systematically reviewed with the Preferred Reporting Items for Systematic Reviews guidelines on April 10, 2020.

STUDY SELECTION

Studies of patients with proximal humeral fractures treated primarily with FA and locking compression plates and with a minimum follow-up of 6 months were included, and presenting results with standardized clinical scales, radiological values, and operative complications.

DATA EXTRACTION

Two authors independently extracted data from the selected studies with a standardized data collection form. Subsequently, each extracted data set was consolidated on the agreement of authors.

DATA SYNTHESIS

From the initial screening of 361 articles, 5 case series and 6 retrospective cohort studies were included. A meta-analysis was not performed.

CONCLUSIONS

FA improved the clinical and radiological results, thereby reducing complications. The optimal indication for this procedure may be a 4-part fracture with medial column disruption in younger adults.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

The effect of medial calcar support on proximal humeral fractures treated with locking plates

Background

Studies have reported mixed results on the importance of medial calcar support for the treatment of proximal humeral fractures. The purpose of this study was to compare radiographic and functional outcomes of patients who had displaced proximal humeral fractures with varying levels of medial support.

Methods

We performed a retrospective comparative cohort study. The study was conducted at a Level III trauma center in Taiwan. Seventy patients with proximal humeral fractures were collected retrospectively from 2015 to 2019. Only patients with two-, three-, or four-part types (Neer type I, II, or III) of displaced proximal humeral fractures were included in this study. However, patients with head-split fracture patterns, shoulder dislocation, prior shoulder trauma, and poor fracture reduction present in postoperative films were excluded. We assessed the radiographic outcomes, including the reduction score and amount of impaction in the humeral head. The functional outcome was evaluated based on the Constant score.

Results

Patients were grouped into the intact medial calcar group and the medial calcar deficiency group. In a subgroup analysis, the group with intact medial support had a significantly lower amount of impaction and a higher Constant score compared with the medial calcar deficiency group. Additionally, the groups with intact medial support had a nonsignificant difference in the Constant score between the affected side and the contralateral side.

Conclusion

The amount of impaction and the reduction score in the humeral head at the 12-month radiographic follow-up were significantly higher in the group with  medial support deficiency. However, the reduction score after surgery exhibited no difference. This implies that the inherent nature of medial comminution of proximal humeral fracture may lead to inferior radiographic outcomes.

Effect of Calcar Screw in Locking Compression Plate System for Osteoporotic Proximal Humerus Fracture: A Finite Element Analysis Study

This study proposes a finite element analysis (FEA) model for complex fractures at the osteoporotic proximal humerus and investigates the relevance of using a calcar screw in surgical treatments using this model. Two types of three-dimensional (3D) fracture models of patients with osteoporotic humerus were constructed reflecting the mechanical properties of the osteoporotic humerus, such as the Young’s modulus and Poisson’s ratio, and two load conditions mimicking the clinical environment were applied for simulation. Using the 3D models and the conditions, the FEA software calculated the concentration and distribution of stresses developing in the humerus, locking compression plate (LCP), and screws. Then, we evaluated and predicted the fixed state of a LCP system depending on whether the maximum stress value exceeded tensile strength. When axial force was applied, insertion of the calcar screw led to significant reduction of stress applied on screws in the fracture model having a medial gap by approximately 61%, from 913.20 MPa to 351.84 MPa. Based on the results, it was clearly confirmed that using of calcar screws improved the stability of a three-part fractures and simultaneously reinforced medial support.

Does mechanism of injury impact the outcome of operative fixation of geriatric proximal humerus fractures

BACKGROUND

The purpose of this study is to determine the effects of energy mechanism on outcomes following repair of proximal humerus fractures (PHF) in the middle aged and geriatric population.

METHODS

Two hundred sixty-nine patients who presented to our academic medical center between 2006 and 2020, and underwent operative treatment of a proximal humerus fracture were prospectively enrolled in an IRB-approved database. Patients above 55 were divided into high energy (motor vehicle accident, pedestrian struck, or fall > 2 stairs) or low energy mechanisms (fall from standing or < 2 stairs). Of 97 patients with complete documentation and follow-up, 72 were included in the low velocity (LV) group and 25 were included in the high velocity (HV) group. Demographic information, primary injury details, healing and time to union, range of motion (ROM), complications, and need for reoperation were assessed at initial presentation and subsequent follow-up appointments.

RESULTS

Mean age, BMI, and gender were significantly different between the LV and HV cohorts (p = 0.01, 0.04, 0.01). OTA/AO fracture patterns were similar between the groups. (p = 0.14). Bony healing and complications occurred with similar frequency between groups (p = 1.00, 0.062). The most common complications in the LV and HV groups included avascular necrosis (9.7%, 16.0%), and screw penetration (4.2%, 12.0%), while the HV group also had rotator cuff issues including weakness and tendonitis (12.0%). There was no significant difference in need for reoperation between cohorts (p = 0.45). Time to healing, shoulder ROM, and DASH scores did not differ between each group.

CONCLUSIONS

Energy and mechanism demonstrates similar outcomes in operatively treated proximal humerus fractures. These factors should not play a role in decisions for surgery in these patients and can help guide patient expectations.

Risk factors for fracture-related infection after open reduction and internal fixation of proximal humerus fractures: A multicenter retrospective study of 496 fractures (TRON group study)

INTRODUCTION

One of the complications of the surgical therapy for proximal humerus fractures is fracture-related infection (FRI). This multicenter study aimed to investigate the incidence of FRI and clarify the risk factors associated with FRI in patients receiving open reduction and internal fixation for proximal humerus fracture.

MATERIAL AND METHODS

Among 684 patients diagnosed as having proximal humerus fracture and who were treated by surgical therapy in 13 institutions (named TRON group) from 2015 through 2020, 496 patients (men, n = 134, women, n = 362; mean [SD] age, 68.5 [14.5] years; mean [SD] body mass index [BMI], 23.0 [4.4] kg/m²) were included as subjects. Excluded were 188 patients due to less than 12 month's follow-up, patients who underwent osteosynthesis using neither plate nor nail and those with open fracture. We extracted the following as risk factors of FRI: sex, BMI, smoking status, diabetes, glenohumeral fracture dislocation, fracture classification, approach, implant, waiting period, type of anesthesia, operative time and blood loss during surgery. We conducted logistic regression analysis to investigate the risk factors of FRI using these extracted items as explanatory variables and the presence or absence of FRI as the response variable.

RESULT

FRI occurred after surgery for proximal humerus fracture in 9 of the 496 patients (1.8%). The causative organism was methicillin-susceptible Staphylococcus aureus in 4 patients, Pseudomonas aeruginosa in one patient and Enterococcus faecalis in one patient. In the other 3 patients, causative organisms were not detected. The univariate analysis showed significant differences for present of glenohumeral fracture dislocation (p = 0.004). Logistic regression analysis showed glenohumeral fracture dislocation to be the significant explanatory factor for FRI (odds ratio 12.3, p = 0.0375).

CONCLUSION

This study revealed an infection rate following open reduction and internal fixation of proximal humerus fracture of 1.8% (9 patients) and that Staphylococcus was the most frequent causative organism. Glenohumeral fracture dislocation is a significant risk for postoperative FRI.

Factors influencing surgical management of proximal humerus fractures: do shoulder and trauma surgeons differ?

BACKGROUND

Proximal humerus fractures (PHFs) are managed with open reduction and internal fixation (ORIF), hemiarthroplasty (HA), reverse shoulder arthroplasty (RSA), or nonoperatively. Given the mixed results in the literature, the optimal treatment is unclear to surgeons. The purpose of this study was to survey orthopedic shoulder and trauma surgeons to identify the patient- and fracture-related characteristics that influence surgical decision-making.

METHODS

We distributed a 23-question closed-response email survey to members of the American Shoulder and Elbow Surgeons and Orthopaedic Trauma Association. Questions posed to respondents included demographics, surgical planning, indications for ORIF and arthroplasty, and the use of surgical augmentation with ORIF. Numerical and multiple-choice responses were compared between shoulder and trauma surgeons using unpaired t-tests and χ² tests, respectively.

RESULTS

Respondents included 172 shoulder and 78 trauma surgeons. When surgery is indicated, most shoulder and trauma surgeons treat 2-part (69%) and 3-part (53%) PHFs with ORIF. Indications for managing PHFs with arthroplasty instead of ORIF include an intra-articular fracture (82%), bone quality (76%), age (72%), and previous rotator cuff dysfunction (70%). In patients older than 50 years, 90% of respondents cited a head-split fracture as an indication for arthroplasty. Both shoulder and trauma surgeons preferred RSA for treating PHFs presenting with a head-split fracture in an elderly patient (94%), pre-existing rotator cuff tear (84%), and pre-existing glenohumeral arthritis with an intact cuff (75%). Similarly, both groups preferred ORIF for PHFs in young patients with a fracture dislocation (94%). In contrast, although most trauma surgeons preferred to manage PHFs in low functioning patients with a significantly displaced fracture or nonreconstructable injury nonoperatively (84% and 86%, respectively), shoulder surgeons preferred either RSA (44% and 46%, respectively) or nonoperative treatment (54% and 49%, respectively) (P < .001). Similarly, although trauma surgeons preferred to manage PHFs in young patients with a head-split fracture or limited humeral head subchondral bone with ORIF (98% and 87%, respectively), shoulder surgeons preferred either ORIF (54% and 62%, respectively) or HA (43% and 34%, respectively) (P < .001).

CONCLUSIONS

ORIF and HA are preferred for treating simple PHFs in young patients with good bone quality or fracture dislocations, whereas RSA and nonoperative management are preferred for complex fractures in elderly patients with poor bone quality, rotator cuff dysfunction, or osteoarthritis. The preferred management differed between shoulder and trauma surgeons for half of the common PHF presentations, highlighting the need for future research.

Improved outcomes for proximal humerus fracture open reduction internal fixation augmented with a fibular allograft in elderly patients: a systematic review and meta-analysis

BACKGROUND

To date, no meta-analysis has been performed on the efficacy of fibular allograft augmentation for the management of proximal humerus fractures. The purpose of this study was to evaluate the radiographic and clinical outcomes of proximal humerus fractures treated with a locking compression plate (LCP) with or without fibular allograft augmentation.

METHODS

The Cochrane Database of Systematic Reviews, the Cochrane Register of Controlled Trials, PubMed, MEDLINE, Web of Science, and SCOPUS were queried in June of 2021 for literature comparing the radiographic and clinical outcomes for patients with proximal humerus fractures that were treated with an LCP only or an LCP augmented with a fibular allograft. Data describing study design, level of evidence, demographic information, final follow-up, radiographic changes in humeral head height (HHH), radiographic changes in neck shaft angle (NSA), final American Shoulder and Elbow Surgeons (ASES) scores, final Constant-Murley scores, and major complications were collected. Risk of bias was assessed using the Methodological Index for Non-Randomized Studies (MINORS). A meta-analysis was performed using pooled weighted mean differences (WMD) to compare changes in HHH, NSA, final ASES and final Constant-Murley scores between the 2 groups; a pooled odds ratio (OR) was used to compare complications between the groups.

RESULTS

Ten studies with a total of 802 patients were identified. There was a significant difference that favored patients augmented with a fibular allograft for change in HHH (WMD = -2.40; 95% confidence interval [CI], -2.49 to -2.31; P < .00001), change in NSA (WMD = -5.71; 95% CI, -6.69 to -4.72; P < .00001), final ASES scores (WMD = 5.08; 95% CI, 3.69-6.48; P < .00001), and OR for developing a major complication (OR = 0.37; 95% CI, 0.23-0.59; P < .0001). There was no significant difference in final Constant-Murley scores (WMD = 3.36; 95% CI, -0.21 to 6.93; P = .06) or revision surgery rate (P = .182) between the 2 groups.

CONCLUSION

The pooled WMD and prediction interval suggest that 95% of patients with proximal humerus fractures treated with an LCP augmented with a fibular allograft will have improved radiographic outcomes, improved ASES clinical outcome scores, and decreased odds of a major complication when compared with patients treated with an LCP alone. Limitations of this study include a relatively short average final follow-up time (<2 years) and a potential lack of standardization for radiographic outcomes among included studies.

Angular stable plate versus reverse shoulder arthroplasty for proximal humeral fractures in elderly patient

BACKGROUND

Treatment of complex proximal humeral fractures in the elderly is a challenge and reverse shoulder arthroplasty (RTSA) is now an important alternative to open reduction internal fixation (ORIF) with angular stable plate. The purpose of this study is to compare clinical and radiological outcomes of RTSA and ORIF in the elderly.

METHODS

We retrospectively analyzed patients treated for three- or four-part displaced fractures of the proximal humerus. Range of motion, disabilities of the arm, shoulder and hand (DASH) and Constant scores were recorded. X-ray exam in three projections completed the clinical observation at follow-up.

RESULTS

Forty-eight patients were enrolled after a mean follow-up of 37 months: 22 RTSA and 26 ORIF. Mean age at trauma was 74 years. Compared with RTSA patients, ORIF patients had significantly higher mean external rotation (28° vs. 14°) and better results in modal internal rotation (hand at D7 vs. hand at L5-S1). No significant differences were seen in DASH and Constant scores. Avascular necrosis and loss of reduction with varus dislocation of the humeral head were the most frequent causes of revision surgery in ORIF (34.6%) while the revision rate of the RTSA was 9.1%.

CONCLUSION

In this study, both treatments showed good clinical outcomes, but RTSA resulted in lower revision rate than ORIF. Even if external and internal rotation in RTSA patients were worse than ORIF, they did not affect the patient's quality of life. So, the reverse arthroplasty seems to be a more reliable treatment.

Why locking plates for the proximal humerus do not fit well

INTRODUCTION

We compared the angle of the humerus and plate and to assess compatibility of a plate to the proximal humerus using three-dimensional (3D) printed models.

MATERIALS AND METHODS

A total of 120 cases were included, who underwent anteroposterior shoulder radiographs. From these, 30 cases with 3D shoulder computed tomography scans were randomly selected to print 3D model. The lateral angle between the lateral cortex of the humeral shaft and lateral border of the greater tuberosity (GT), neck-shaft angle, and height from the most proximal point of the GT to the angular point were measured. When the plates were applied on the 3D models, the gap from the most proximal point of the GT to the proximal rim of the plate was measured.

RESULTS

The mean lateral angle in plain radiographs was 12.9 ± 2.2° and height from the most proximal point of the GT to the angular point was 44.4 ± 4.7 mm. The bending angles of the three plates were 8° and 10°. Height from the proximal rim of the plate to the bending point was 42.4, 42.0 and 43.8 mm. In 98% of cases, the lateral angle of the humerus was larger than all three plates. In 43% of cases, height of the GT was smaller than height of plates. When plates were applied to the 3D model, the mean gap from GT to plate was 4.8 ± 2.8 mm.

CONCLUSIONS

There was large variation in the lateral angle of the proximal humerus, which was not correlated with the neck-shaft angle. The lateral angle of the humerus was larger than the plates and prone to varus reduction and medial collapse.

LEVEL OF EVIDENCE OR CLINICAL RELEVANCE

Basic science study.

Age-Independent Clinical Outcome in Proximal Humeral Fractures: 2-Year Results Using the Example of a Precontoured Locking Plate

INTRODUCTION

The optimal treatment strategy for the proximal humeral fracture (PHF) remains controversial. The debate is centered around the correct treatment strategy in the elderly patient population. The present study investigated whether age predicts the functional outcome of locking plate osteosynthesis for this fracture entity.

METHODS

A consecutive series of patients with surgically treated displaced PHF between 01/2017 and 01/2018 was retrospectively analyzed. Patients were treated by locking plate osteosynthesis. The cohort was divided into two groups: Group 1 (≥65 years) and Group 2 (<65 years). At the follow-up examination, the SSV, CMS, ASES, and Oxford Shoulder Score (OS), as well as a radiological follow-up, was obtained. The quality of fracture reduction is evaluated according to Schnetzke et al. Results: Of the 95 patients, 79 were followed up (83.1%). Group 1 consists of 42 patients (age range: 65-89 years, FU: 25 months) and Group 2 of 37 patients (28-64 years, FU: 24 months). The clinical results showed no significant differences between both groups: SSV 73.4 ± 23.4% (Group 1) vs. 80.5 ± 189% (Group 2). CMS: 79.4 ± 21 vs. 81.9 ± 16, ASES: 77.2 ± 20.4 vs. 77.5 ± 23.1, OS: 39.5 ± 9.1 vs. 40.8 ± 8.2; OS: 39.5 ± 9.1 vs. 40.8 ± 8.2. In the radiological follow-up, fractures healed in all cases. Furthermore, the quality of fracture reduction in both groups is comparable without significant differences. The revision rate was 9.5% in Group 1 vs. 16.2% in Group 2.

DISCUSSION

Both age groups show comparable functional outcomes and complication rates. Thus, the locking plate osteosynthesis can be used irrespective of patient age; the treatment decision should instead be based on fracture morphology and individual patient factors.

Proximal Humerus Fractures: Epidemiology and trends in surgical management of hospital-admitted patients in Portugal

Background

Proximal humerus fractures (PHFs) are frequent and associated with significant health care burden. National epidemiological data are limited. Our objective is to characterize the Portuguese population admitted with PHFs and analyze therapeutic management, the impact of associated lesions, and mortality rate.

Methods

This was a retrospective, observational study of admissions from mainland public hospitals (2000-2015), with primary or secondary diagnosis of PHFs. Incomplete records, pathologic lesions, malunion/nonunion, and hardware removal were excluded. Age, gender, admission date, hospitalization period, associated injuries, treatment, and mortality were recorded.

Results

A total of 19,290 patients were included. Through the analyzed period, an increase in the absolute number and incidence of PHFs was observed. The mean age at diagnosis was 62.6 ± 21.0 years old (57% elderly; 63.5% female). The mean length of stay was 10.0 ± 14.1 days, higher in patients submitted to arthroplasty (P < .001) and in those with associated fractures (25%; P < .001). A total of 14,482 patients were operated, most frequently with open reduction and internal fixation (28%). The inpatient mortality rate was 3.2%, significantly higher in patients with associated fractures (odds 2.77 for lower limb vs. upper limb).

Conclusion

There is a trend toward an increase in surgical management of PHFs. The relative proportion of open reduction and internal fixation and arthroplasty (particularly reverse arthroplasty) increased, probably reflecting biomechanical implant properties, fracture pattern, and demand for better functionality. Associated fractures are an important comorbidity, associated with increased mortality and length of stay.

The Surgical Treatment of Proximal Humeral Fractures in Elderly Patients—An Analysis of the Long-Term Course of Locked Plate Fixation and Reverse Total Shoulder Arthroplasty Based on Health Insurance Data

BACKGROUND

The goal of this study is to compare mortality, the frequency of major adverse events, and complication rates after the surgical treatment of proximal humeral fractures with locked plate fixation (LPF) and reverse total shoulder arthroplasty (RTSA) in elderly patients.

METHODS

Health insurance data from patients aged 65 and above over the period January 2010 to September 2018 were retrospectively evaluated. The median follow-up duration after locked plate fixation (40 419 patients) or reverse total shoulder arthroplasty (13 552 patients) was 52 months. Hazard ratios adapted to the patients' risk profiles were determined with the aid of multivariate Cox regression models. The p-values were adjusted with the Bonferroni- Holm method.

RESULTS

After adaptation to the patients' risk profiles, reverse total shoulder arthroplasty was found to be associated with statistically significantly lower mortality (HR: 0.92; 95% confidence interval: [0.88; 0.95]; p <0.001) and fewer major adverse events (HR: 0.92 [0.89; 0.95]; p <0.001) than locked plate fixation. Eight years after surgery, the risk of surgical complications was twice as high for LPF (12.2% [11.9; 12.7]; HR for RTSA versus LPF: 0.5 [0.46; 0.55]; p <0.001 for both), with 3.8% [3.6; 4.0] of the patients receiving a secondary RTSA. Surgical complications were more common (p <0.05) in patients carrying a diagnosis of osteoporosis, obesity, alcohol abuse, chronic polyarthritis, or frozen shoulder.

CONCLUSION

The long-term findings accord with clinical short-term findings from other studies and support the current trend toward more liberal use of inverse shoulder endoprosthesis in elderly patients.

Reduction and fixation of proximal humeral fracture with severe medial instability using a small locking plate

BACKGROUND

Currently, the reduction and support of comminuted medial cortex of humeral fracture remains a challenge, Therefore, a novel reduction and fixation technique that employs an anteromedial small locking plate was explored in this study, and its viability and the associated complications were assessed.

METHODS

Fifteen cases of proximal humeral fractures with medial instability (five cases were classified as three-part and ten as four-part by Neer classification) were treated by the proposed reduction technique using an anteromedial small locking plate. Subsequently, the radiological and clinical outcomes were evaluated over an average follow-up period of 18.53 months.

RESULTS

The average operation time was 108 min (range, 70-130 min), and the mean fracture union time in all patients was 12.13 weeks (range, 8-16 weeks). Complications such as infection and neurovascular injury were not observed. Postoperative X-ray showed avascular necrosis and screw penetration in one patient, while screw penetration, varus malunion, or significant reduction loss was not found in the other cases. The mean Constant score was 79.8 (range, 68-92) during the final visit.

CONCLUSIONS

The use of an anteromedial small locking plate improved the reduction efficiency, reconstructed the medial support, and alleviated the occurrence of complications in proximal humeral fractures with medial instability.

DOES CEMENT CURING CAUSE CONCERNING INCREASE OF THE TEMPERATURE WHEN DELIVERED IN THE HUMAN HUMERUS?

For the treatment of humeral fractures, numerous strategies exist to improve the clinical outcome of the reconstruction and to reduce the incidence of fixation failure. Injection of acrylic-based cements to reinforce the bone and/or augment the screws is one option. The heat generated during cement polymerization raises some concerns, as it could cause tissue damage. The first aim of this study was to measure the temperature over time during polymerization when acrylic cements are delivered inside the bone to treat fracture. The second aim was to assess if the ISO-5833:2002 standard can predict what happens in a real bone. Different tests were performed using two acrylic-based cements (Mendec and Cal-Cemex): (i) the ISO-5833:2002 standard (Annex C); (ii) tests on human bones (humeral diaphysis and humeral head) injected with cement to simulate fracture treatment. In the humeri, the highest temperature was measured in the diaphysis (68.6∘C for Mendec, 62.7∘C for Cal-Cemex). These values are comparable with the temperature reached in other consolidated applications (vertebroplasty). Exposure to high temperature was shorter for the diaphysis than for the head. For both cements, in both the diaphysis and the head, temperatures exceeded 48∘C for less than 10[Formula: see text]min. This is within the threshold for tissue necrosis. The ISO-5833:2002 yielded significantly different results in terms of maximum temperature (difference exceeding 15∘C) and exposure to temperature above 48∘C and 45∘C. This discrepancy is probably due to a combination of factors affecting the amount of heat produced and dissipated (e.g., amount and shape of the cement, thermal conductivity).

Efficacies and complications of internal fixations with PHILOS plate and intramedullary Multiloc® nails in the surgical treatment of proximal humerus fractures

OBJECTIVE

To compare the efficacies of internal fixations with proximal humeral internal locking system (PHILOS) plate and intramedullary MultiLoc^® nails in the surgical treatment of proximal humerus fractures (PHF).

METHODS

A total of 115 patients with PHF admitted to our hospital were selected as the research subjects, and were randomly divided into PHILOS group (n=57) and MultiLoc group (n=58). PHILOS group was treated with internal fixation with PHILOS plate, while MultiLoc group was treated with internal fixation with intramedullary MultiLoc^® nails.

RESULTS

MultiLoc group was superior to PHILOS group in the surgical duration and amount of intraoperative hemorrhage (P < 0.05). At 1 week after surgery, the visual analogue scale (VAS) scores in MultiLoc group were lower than those in PHILOS group (P < 0.05). After surgery, MultiLoc group had a shorter time of occurrence of bony callus and disappearance of fracture line (P < 0.05) and a lower incidence of complications (0.00% vs. 3.51%) (P > 0.05) compared with PHILOS group. At 6 months after surgery, MultiLoc group had higher abduction and external rotation angles and higher scores of Constant-Murley and American Shoulder and Elbow Surgeons (ASES) than PHILOS group (P < 0.05).

CONCLUSION

The internal fixations with PHILOS plate and intramedullary MultiLoc^® nails are effective in the treatment of PHF. However, the internal fixation with intramedullary MultiLoc^® nails is superior to the internal fixation with PHILOS plate in alleviating pain and expediting the postoperative restoration of joint function.

MutiLoc Nail Versus Philos Plate in Treating Proximal Humeral Fractures: A Retrospective Study Among the Alderly

Background

Proximal humeral fractures (PHFs) account for 4–5% of all fractures in the elderly. There is still a controversy among the treatments in the displaced PHFs. Our aim was to explore the clinical outcome of PHFs with the treatment of MultiLoc nail or Philos plate in the elderly patients.

Methods

A total of 82 sustained elderly patients with PHFs were finally recruited between Dec 2016 and Dec 2017. 34 patients were treated with MultiLoc nail and 48 patients were treated with Philos plate. The demographics, fracture types, blood loss, operation time, union time, postoperative complications, visual analog scores (VASs), Constant scores, American Shoulder and Elbow Scores (ASESs), and neck-shaft-angle (NSA) between the two groups were compared.

Results

No differences were observed in the demographics, fracture types, VAS, Constant scores, and ASES scores between the two groups at final follow-up. Compared with the plate group, the blood loss, operation time, and union time were significantly lower in the nail group (all P < .05). The rate of general complications was 54.17% in the plate group, which was higher than that in the nail group (26.47%, P = .01). Three patients experienced reoperation in the plate group (3/48; 6.25%), but none in the nail group. Although there were no significant differences in intraoperative NSA between the two groups, the NSA at final follow-up in the nail group was much higher than the plate group (137.55 ± 5.53°vs 134.47 ± 5.92°, P = .02).

Conclusions

Multiloc intramedullary nail showed the similar effectiveness of final VAS, final Constant scores, and ASES scores in PHFs treatment with Philos plate. However, MultiLoc nail is superior to Philos plate in blood loss, operation time, complications, reoperation rate, and the change of NSA.

Unexpected Failure of Plate Osteosynthesis of a Proximal Humerus Fracture Following a Seizure Episode in the Early Postoperative Period

Seizure disorders have been commonly linked with fractures and dislocations of the shoulder region. However, catastrophic failure of plate osteosynthesis of a proximal humerus fracture, following a seizure episode in an early postoperative period, has not been reported. We present a case report of a middle-aged male patient who was treated satisfactorily for a right proximal humerus fracture with plate osteosynthesis but experienced a seizure episode in the early postoperative period. The seizure episode resulted in a catastrophic failure of the plate fixation. The patient was then managed with plate and screw removal and revision fixation with a lightweight pin-based external fixator. Further, the functional outcomes were satisfactory. Extreme caution must be exercised to manage proximal humerus fractures in people with epilepsy concerning anticonvulsant drug compliance and osteoporosis.

Outcomes following fracture fixation with the Equinoxe® proximal humerus plate: an improvement over PHILOS®?

INTRODUCTION

The purpose of this study is to compare patient outcomes between the Equinoxe® (Exactech, Gainesville, Fla) proximal humerus locking plate and the PHILOS® (Synthes, Paoli, PA) proximal humerus locking plate.

METHODS

Two hundred and seventy-one patients with a displaced proximal humerus fracture presented to our academic medical center between February 2003 and October 2020. Functional outcomes assessed included the Disabilities of the Arm, Shoulder, and Hand questionnaire and shoulder range of motion. Radiographs were utilized to determine fracture healing and development of posttraumatic osteoarthritis or osteonecrosis.

RESULTS

Overall, 108 Equinoxe® and 87 PHILOS® patients treated by a single surgeon with complete clinical, functional, and radiographic follow-up were included in the study. Demographics were similar between groups. One hundred and eight Equinoxe® patients healed at a mean time to union by 3.7 ± 2.2 months, and 86 PHILOS® patients healed (p = 0.24) by 4.1 ± 2.3 months after surgery (p = 0.31). Shoulder external rotation was greater in Equinoxe® patients by 7 degrees (p = 0.044), and forward elevation was greater by 16 degrees (p = 0.005) at one-year follow-up. DASH scores were similar between patients at the 3-, 6-, and 12-month follow-up (p = 0.86, p = 0.77, p = 0.64). Fewer Equinoxe® patients experienced complications (p = 0.043).

CONCLUSION

Fixation of a proximal humerus fracture can safely be performed with both Equinoxe® and PHILOS® proximal humerus locking plates. Patients fixed with Equinoxe® plates achieved a slightly greater degree of external rotation, forward elevation, and experienced fewer complications. This difference may be due to surgeon experience rather than the implant itself.