Valorization of untreated rice bran towards bioflocculant using a lignocellulose-degrading strain and its use in microalgal biomass harvest

Degradation of lignocellulose by different bacterial and fungal co-cultures

Long seen as non-valorisable waste, agricultural co-products are increasingly used in biorefinery processes. Co-culture appears as new trend for to improve the degradation of lignocellulose and improve the production of bioproducts. The goal of the study was to setup inter-domain co-cultures with high capabilities of lignocellulose degradation using a pluridisciplinary approach combining bioinformatics, enzymology, transcriptomics. Different individual lignocellulolytic strains: Trichoderma reesei QM6a and three bacteria (Streptomyces coelicolor A3(2), Rhizobium sp.XylPr11 and Sphingobacterium prati AraPr2 affiliated from different phyla) were used in that study . Synergic activities have been observed and quantified in co-culture conditions, particularly for xylanases and peroxidases activities. The enzymatic activities for the co-cultures in the most interesting co-culture (T. reesei QM6a/S. coelicolor A3(2)) reached more up to 2 IU/mL and 430 IU/mL respectively for the xylanase and peroxidase. Furthermore, ATR-FTIR analysis showed a real impact of co-culture condition on the substrate compared to the monoculture specially for hemicellulose degradation. Transcriptomics of S. coelicolor A3(2) either in mono or co-culture showed a relative similar pattern profile whatever the condition analysed with a specific overexpression of certain CAZyme genes involved in glycolysis due to the hydrolytic role played by the fungal partner. This work provided the proof of concept for technological feasibility, pertinence and usefulness of interdomain co-culture.

Sustainable production of bacterial flocculants by nylon-6,6 microplastics hydrolysate utilizing Brucella intermedia ZL-06

Nylon-6,6 microplastics (NMPs) in aquatic systems have emerged as potential contaminants to the global environment and have garnered immense consideration over the years. Unfortunately, there is currently no efficient method available to eliminate NMPs from sewage. This study aims to address this issue by isolating Brucella intermedia ZL-06, a bacterium capable of producing a bacterial polysaccharide-based flocculant (PBF). The PBF generated from this bacterium shows promising efficacy in effectively flocculating NMPs. Subsequently, the precipitated flocs (NMPs + PBF) were utilized as sustainable feedstock for synthesizing PBF. The study yielded 6.91 g/L PBF under optimum conditions. Genome sequencing analysis was conducted to study the mechanisms of PBF synthesis and nylon-6,6 degradation. The PBF exhibited impressive flocculating capacity of 90.1 mg/g of PBF when applied to 0.01 mm NMPs, aided by the presence of Ca2+. FTIR and XPS analysis showed the presence of hydroxyl, carboxyl, and amine groups in PBF. The flocculation performance of PBF conformed to Langmuir isotherm and pseudo-first-order adsorption kinetics model. These findings present a promising approach for reducing the production costs of PBF by utilizing NMPs as sustainable nutrient sources.

Functional identification of two novel carbohydrate-binding modules of glucuronoxylanase CrXyl30 and their contribution to the lignocellulose saccharification

BACKGROUND

Glycoside hydrolase (GH) family 30 xylanases are a distinct group of xylanases, most of which have a highly specific catalytic activity for glucuronoxylan. Since GH30 xylanases do not normally carry carbohydrate-binding modules (CBMs), our knowledge of the function of their CBMs is lacking.

RESULTS

In this work, the CBM functions of CrXyl30 were investigated. CrXyl30 was a GH30 glucuronoxylanase containing tandem CBM13 (CrCBM13) and CBM2 (CrCBM2) at its C terminus, which was identified in a lignocellulolytic bacterial consortium previously. Both CBMs could bind insoluble and soluble xylan, with CrCBM13 having binding specificity for the xylan with L-arabinosyl substitutions, whereas CrCBM2 targeted L-arabinosyl side chains themselves. Such binding abilities of these two CBMs were completely different from other CBMs in their respective families. Phylogenetic analysis also suggested that both CrCBM13 and CrCBM2 belong to novel branches. Inspection of the simulated structure of CrCBM13 identified a pocket that just accommodates the side chain of 3(2)-alpha-L-arabinofuranosyl-xylotriose, which forms hydrogen bonds with three of the five amino acid residues involved in ligand interaction. The truncation of either CrCBM13 or CrCBM2 did not alter the substrate specificity and optimal reaction conditions of CrXyl30, whereas truncation of CrCBM2 decreased the kcat/Km value by 83% (± 0%). Moreover, the absence of CrCBM2 and CrCBM13 resulted in a 5% (± 1%) and a 7% (± 0%) decrease, respectively, in the amount of reducing sugar released by the synergistic hydrolysis of delignified corncob whose hemicellulose is arabinoglucuronoxylan, respectively. In addition, fusion of CrCBM2 with a GH10 xylanase enhanced its catalytic activity against the branched xylan and improved the synergistic hydrolysis efficiency by more than fivefold when delignified corncob was used as substrate. Such a strong stimulation of hydrolysis resulted from the enhancement of hemicellulose hydrolysis on the one hand, and the cellulose hydrolysis is also improved according to the lignocellulose conversion rate measured by HPLC.

CONCLUSIONS

This study identifies the functions of two novel CBMs in CrXyl30 and shows the good potential of such CBMs specific for branched ligands in the development of efficient enzyme preparations.

Isolation of Saccharibacillus WB17 strain from wheat bran phyllosphere and genomic insight into the cellulolytic and hemicellulolytic complex of the Saccharibacillus genus

The microorganisms living on the phyllosphere (the aerial part of the plants) are in contact with the lignocellulosic plant cell wall and might have a lignocellulolytic potential. We isolated a Saccharibacillus strain (Saccharibacillus WB17) from wheat bran phyllosphere and its cellulolytic and hemicellulolytic potential was investigated during growth onto wheat bran. Five other type strains from that genus selected from databases were also cultivated onto wheat bran and glucose. Studying the chemical composition of wheat bran residues by FTIR after growth of the six strains showed an important attack of the stretching C-O vibrations assigned to polysaccharides for all the strains, whereas the C = O bond/esterified carboxyl groups were not impacted. The genomic content of the strains showed that they harbored several CAZymes (comprised between 196 and 276) and possessed four of the fifth modules reflecting the presence of a high diversity of enzymes families. Xylanase and amylase activities were the most active enzymes with values reaching more than 4746 ± 1400 mIU/mg protein for the xylanase activity in case of Saccharibacillus deserti KCTC 33693 T and 452 ± 110 mIU/mg protein for the amylase activity of Saccharibacillus WB17. The total enzymatic activities obtained was not correlated to the total abundance of CAZyme along that genus. The Saccharibacillus strains harbor also some promising proteins in the GH30 and GH109 modules with potential arabinofuranosidase and oxidoreductase activities. Overall, the genus Saccharibacillus and more specifically the Saccharibacillus WB17 strain represent biological tools of interest for further biotechnological applications.

The last 25 years of research on bioflocculants for kaolin flocculation with recent trends and technical challenges for the future

The generation of kaolin-containing wastewater is an inevitable consequence in a number of industries including mining, wastewater treatment, and bitumen processing. In some cases, the production of kaolin tailings waste during the production of bitumen or phosphate is as high as 3 times greater than the actual produced product. The existing inventory of nearly five billion barrels of oil sands tailings alone represents a massive storage and reclamation challenge, as well as a significant economic and environmental liability. Current reclamation options like inorganic coagulants and organic synthetic polymers may settle kaolin effectively, but may themselves pose an additional environmental hazard. Bioflocculants are an emerging alternative, given the inherent safety and biodegradability of their bio-based compositions. This review summarizes the different research attempts towards a better bioflocculant of kaolin, with a focus on the bioflocculant source, composition, and effective flocculating conditions. Bacillus bacteria were the most prevalent single species for bioflocculant production, with wastewater also hosting a large number of bioflocculant-producing microorganisms while serving as an inexpensive nutrient. Effective kaolin flocculation could be obtained over a broad range of pH values (1-12) and temperatures (5-95°C). Uronic acid and glutamic acid were predominant sugars and amino acids, respectively, in a number of effective bioflocculants, potentially due to their structural and charge similarities to effective synthetic polymers like polyacrylamide. Overall, these results demonstrate that bioflocculants can be produced from a wide range of microorganisms, can be composed of polysaccharides, protein or glycoproteins and can serve as effective treatment options for kaolin. In some cases, the next obstacle to their wide-spread application is scaling to industrially relevant volumes and their deployment strategies.

One-step fermentation for producing xylo-oligosaccharides from wheat bran by recombinant Escherichia coli containing an alkaline xylanase

BACKGROUND

One-step fermentation is a cheap way to produce xylo-oligosaccharides (XOS), where production of xylanases and XOS is integrated into a single process. In spite of cost advantage, one-step fermentation is still short in yield so far due to the limited exploration. To cope with this issue, production of XOS from wheat bran by recombinant Escherichia coli through one-step fermentation was investigated in this study.

RESULTS

An endo-β-1,4-xylanase gene belonging to glycoside hydrolase family 11 of Bacillus agaradhaerens was employed to construct recombinant E. coli. This xylanase showed maximal activity at 60 °C and pH 8.0-8.5. Its activity retained more than 60% after incubation at 70 °C for 4 h, showing a good stability. The recombinant E. coli BL21(DE3) could secreted xylanases that directly hydrolyzed de-starched wheat bran to XOS in fermentation medium. The XOS generated from hydrolysis consisted of xylose, xylobiose and xylotriose accounting for 23.1%, 37.3% and 39.6%, respectively. Wheat bran concentration was found to be the most crucial factor affecting XOS production. The XOS concentration reached 5.3 mg/mL at 10% loading of wheat bran, which is higher than those of previous researches. Nitrogen source type could also affect production of XOS by changing extracellular xylanase activity, and glycine was found to be the best one for fermentation. Optimal fermentation conditions were finally studied using response surface optimization. The maximal concentration emerged at 44.3 °C, pH 7.98, which is affected by characteristics of the xylanase as well as growth conditions of E. coli.

CONCLUSIONS

This work indicates that the integrated fermentation using recombinant E. coli is highly competitive in cost and final concentration for producing XOS. Results can also provide theoretical basis for large-scale production and contribute to the wide adoption of XOS.

Biological pretreatment of corn stover for enhancing enzymatic hydrolysis using Bacillus sp. P3

The biological pretreatment for the enzymatic hydrolysis of lignocellulosic biomasses depends exclusively on the effective pretreatment process. Herein, we report a significant enhancement of enzymatic saccharification obtained with corn stover using a bacterial strain Bacillus sp. P3. The hemicellulose removal from corn stover by the strain Bacillus sp. P3 was evaluated for enhancing subsequent enzymatic hydrolysis. Therefore, our study revealed that an alkaline-resistant xylanase as well as other enzymes produced by Bacillus sp. P3 in fermentation broth led to a substantially enhanced hemicellulose removal rate from corn stover within pH 9.36–9.68. However, after a 20-day pretreatment of corn stover by the strain P3, the glucan content was increased by 51% and the xylan content was decreased by 35%. After 72 h of saccharification using 20 U/g of commercial cellulase, the yield of reducing sugar released from 20-day pretreated corn stover was increased by 56% in comparison to the untreated corn stover. Therefore, the use of the strain P3 could be a promising approach to pretreat corn stover for enhancing the enzymatic hydrolysis process of industrial bioenergy productions.

Preparation of a bacterial flocculant by using caprolactam as a sole substrate and its application in amoxicillin removal

High cost is one of the limiting factors in the industrial production of bioflocculant. Simultaneous preparation of bioflocculant from the contaminants in wastewater was considered as a potential approach to reduce the production cost. In this study, caprolactam was verified as sole feedstock for the growth of strain Alcaligenes faecalis subsp. phenolicus ZY-16 in batch experiments. Chemical analysis showed that the as-prepared MBF-16 consisted of heteropolysaccharides (88.3%) and peptides (9.4%). XPS result indicated the plentiful acylamino, hydroxyl and amino groups in MBF-16, which have an indispensable role in amoxicillin flocculation. The flocculation of amoxicillin can be well stimulated by Freundlich isotherm equation, and the Kf was up to 178.6524 for amoxicillin. The kinetic fitting results proved that the flocculation of amoxicillin by MBF-16 was chemisorbed. This contribution may develop a novel technology for the preparation of bacterial flocculants that can consume toxic substrates (caprolactam) and have potential applications in amoxicillin removal.

Recent advances and perspectives in efforts to reduce the production and application cost of microbial flocculants

Microbial flocculants are macromolecular substances produced by microorganisms. Due to its non-toxic, harmless, and biodegradable advantages, microbial flocculants have been widely used in various industrial fields, such as wastewater treatment, microalgae harvest, activated sludge dewatering, heavy metal ion adsorption, and nanoparticle synthesis, especially in the post-treatment process of fermentation with high safety requirement. However, compared with the traditional inorganic flocculants and organic polymeric flocculants, the high production cost is the main bottleneck that restricts the large-scale production and application of microbial flocculants. To reduce the production cost of microbial flocculant, a series of efforts have been carried out and some exciting research progresses have been achieved. This paper summarized the research advances in the last decade, including the screening of high-yield strains and the construction of genetically engineered strains, search of cheap alternative medium, the extraction and preservation methods, microbial flocculants production as an incidental product of other biological processes, combined use of traditional flocculant and microbial flocculant, and the production of microbial flocculant promoted by inducer. Moreover, this paper prospects the future research directions to further reduce the production cost of microbial flocculants, thereby promoting the industrial production and large-scale application of microbial flocculants.

Energy-saving preparation of a bioflocculant under high-salt condition by using strain Bacillus sp. and the interaction mechanism towards heavy metals

A highly efficient bioflocculant, i.e., Na-Bsp was successfully prepared by using a tolerant strain-Bacillus sp. under high-salt condition without sterilization. Salt-containing medium was not infected by other strains throughout the whole incubation period in 168 h. The as-prepared Na-Bsp was found to be cation-dependent, exhibiting high flocculant efficiency (FE) i.e., 97.69 ± 0.61%, towards kaolin particles by aid of Fe³⁺. High FE values were well maintained under a wide pH range and/or boiled water treatment, likely because of the main constituent of polysaccharide. The presence of hydroxyl, carboxyl, and amine groups on the bioflocculant surface were possibly responsible for strong interactions with heavy metals. The adsorption capacities of Pb²⁺, Cu²⁺ and Cr⁶⁺ were 1000.0, 434.8 and 384.6 mg g^-1, respectively. The changing of structure and configuration of bioflocculant during the metal adsorption were explored by the scanning electron microscope with electron energy loss spectroscopy and three-dimensional excitation-emission fluorescence spectrometry. This study provided a novel production method, whereby the conventional sterilization could be avoided, which is of great environmental significance for steam-saving. Furthermore, the as-prepared Na-Bsp exhibited high adsorption capacities toward heavy metals, which sheds lights on its potential usage as an alternative adsorbent.

Treatment of Wastewaters by Microalgae and the Potential Applications of the Produced Biomass—A Review

The treatment of different types of wastewater by physicochemical or biological (non-microalgal) methods could often be either inefficient or energy-intensive. Microalgae are ubiquitous microscopic organisms, which thrive in water bodies that contain the necessary nutrients. Wastewaters are typically contaminated with nitrogen, phosphorus, and other trace elements, which microalgae require for their cell growth. In addition, most of the microalgae are photosynthetic in nature, and these organisms do not require an organic source for their proliferation, although some strains could utilize organics both in the presence and absence of light. Therefore, microalgal bioremediation could be integrated with existing treatment methods or adopted as the single biological method for efficiently treating wastewater. This review paper summarized the mechanisms of pollutants removal by microalgae, microalgal bioremediation potential of different types of wastewaters, the potential application of wastewater-grown microalgal biomass, existing challenges, and the future direction of microalgal application in wastewater treatment.

Current and novel approaches to downstream processing of microalgae: A review

Biotechnological application of microalgae cultures at large scale has significant potential in the various fields of biofuels, food and feed, cosmetic, pharmaceutic, environmental remediation and water treatment. Despite this great potential application, industrialisation of microalgae culture and valorisation is still faced with serious remaining challenges in culture scale-up, harvesting and extraction of target molecules. This review presents a general summary of current techniques for harvesting and extraction of biomolecules from microalgae, their relative merits and potential for industrial application. The cell wall composition and its impact on microalgae cell disruption is discussed. Additionally, more recent progress and promising experimental methods and studies are summarised that would allow the reader to further investigate the state of the art. A final survey of energetic assessments of the different techniques is also made. Bead milling and high-pressure homogenisation seem to give clear advantages in terms of target high value compounds extraction from microalgae, with enzyme hydrolysis as a promising emerging technique. Future industrialisation of microalgae for high scale biotechnological processing will require the establishment of universal comparison-standards that would enable easy assessment of one technique against another.

Production of a bioflocculant from ramie biodegumming wastewater using a biomass-degrading strain and its application in the treatment of pulping wastewater

The major bottleneck for industrial applications of microbial flocculants is the high production cost. Here, a novel bacterium, Diaphorobacter nitroreducens R9, was isolated that can secret ligninase and cellulase and simultaneously produce bioflocculants (MBF-9) through conversion of ramie biomass. The production of MBF-9 was closely related to the ligninase and cellulase activities of D. nitroreducens. Both ligninase and cellulase showed peak activity at pH 8.5 and 6.0 and retained approximately 80% of cellulase activity and 95% of ligninase activity at pH 8.0. The optimal production conditions with the highest bioflocculant yield (3.86 g/L degumming wastewater) were determined at a fermentation time of 48 h, fermentation temperature of 30 °C, inoculum size of 4.0%, COD_Cr of ramie degumming wastewater of 1500 mg/L and initial pH of 8.0. In addition, MBF-9 removed 96.2% turbidity, 79.5% chemical oxygen demand (COD), 59.2% lignin, and 63.1% sugar from the pulping wastewater at an MBF-9 dosage of 831.57 mg/L.

Production of bioflocculant using feather waste as nitrogen source and its use in recycling of straw ash-washing wastewater with low-density and high pH property

Straw ash-washing wastewater is generated in the process of straw combustion power generation and potash fertilizer production. The suspended solid particles in straw ash-washing wastewater are hard to be settled down due to its low-density and high pH properties which inhibit the application of traditional chemical flocculants. Bioflocculant has good advantages in flocculating activity, biodegradability and adaptability of wastewater pH fluctuation. However, high production cost limited the large-scale applications of bioflocculant in wastewater treatment. In this study, the feasibility of using feather waste as cheap alternative nitrogen source of alkaliphilic Bacillus agaradhaerens C9 to produce bioflocculant was investigated. The results showed that strain C9 could simultaneously produce keratinase and bioflocculant, and thereby producing bioflocculant (named as BFF) using feather waste as cheap nitrogen source. The optimal fermentation conditions for enzymatic hydrolysis of feather waste and BFF production was 40 g/L feather wastes, 16 g/L glucose, 37 °C and pH 9.5, and the highest yield of 2.5 g/L was obtained. Moreover, BFF was used to flocculate straw ash-washing wastewater which exhibits low-density and high pH properties, and the highest flocculating rate of 93.1% was achieved when 6.0 mg/L BFF was added. This study reported for the first time that feather waste was used as inexpensive alternative nitrogen source for producing bioflocculant which could treat straw ash-washing wastewater, thereby promoting the resourceful utilization of feather waste and the reuse of straw ash-washing wastewater.

Aspergillus nidulans: A Potential Resource of the Production of the Native and Heterologous Enzymes for Industrial Applications

Aspergillus nidulans is a filamentous fungus that is a potential resource for industrial enzymes. It is a versatile fungal cell factory that can synthesize various industrial enzymes such as cellulases, β-glucosidases, hemicellulases, laccases, lipases, proteases, β-galactosidases, tannases, keratinase, cutinases, and aryl alcohol oxidase. A. nidulans has shown the potential to utilize low-cost substrates such as wheat bran, rice straw, sugarcane bagasse, rice bran, coir pith, black gram residue, and chicken feathers to produce enzymes cost-effectively. A. nidulans has also been known as a model organism for the production of heterologous enzymes. Several studies reported genetically engineered strains of A. nidulans for the production of different enzymes. Native as well as heterologous enzymes of A. nidulans have been employed for various industrial processes.

Production of a bioflocculant from Enterobacter sp. P3 using brewery wastewater as substrate and its application in fracturing flowback water treatment

A novel bioflocculant (BW-P3) was produced by a strain of Enterobacter sp. P3 using brewery wastewater as substrate and was further applied to remove the colored substance of fracturing flowback water. The optimum conditions for bioflocculant production were specified by the response surface methodology as COD of brewery wastewater 1487.77 mg/L, glucose 8.94 g/L and initial pH 7.09, under which a bioflocculant yield of 1.274 g/L could be reached. The BW-P3 consists of 79.12% polysaccharides and 15.63% protein. Results show that BW-P3 has a high molecular weight (921 kDa) and contains functional groups (hydroxyl, amino, carbonyl, and acylamino) that likely contribute to flocculation. When using the BW-P3 to flocculate fracturing flowback water, the optimal dosage was 1 g/L BW-P3 with addition of 100 mg/L polymeric aluminum chloride as coagulant aid, and treated under 50 °C at pH 7. Under the optimal condition, the removal rates of chroma and suspended solids (SS) of the fracturing flowback water could reach 85% and 52%, respectively.

Bioconversion of citrus peel wastes into bioflocculants and their application in the removal of microcystins

In this study, the mechanism for converting citrus peel wastes (CPW) into bioflocculants using Alcaligenes faecalis subsp. phenolicus ZY-16 was analysed. The results demonstrated that the ZY-16 strain could produce various lignocellulolytic enzymes, containing cellulase, hemicellulase, pectinase, protease, and ligninase, enhancing the hydrolysis of citrus peel wastes. Molecular distillation removes antimicrobial limonene, which could inhibit bioflocculant production. The optimal fermentation conditions with the highest bioflocculant yield (3.49 g/L) were 38.79 g/L of CPW, 35.54 °C, and pH 4.48. Furthermore, the bioflocculant was used to eliminate microcystins for the first time, and the highest removal efficiency (90.05%) was achieved at a pH of 3.0, after 800 mg/L of bioflocculant was added into the microcystins solution (10 mg/L) for 60 min. Therefore, this paper demonstrated that CPW could be a cost-effective feedstock for the production of bioflocculants, which have potential application in microcystin removal.

Implications for industrial application of bioflocculant demand alternatives to conventional media: waste as a substitute

The biodegradability and safety of the bioflocculants make them a potential alternative to non-biodegradable chemical flocculants for wastewater treatment. However, low yield and production cost has been reported to be the limiting factor for large scale bioflocculant production. Although the utilization of cheap nutrient sources is generally appealing for large scale bioproduct production, exploration to meet the demand for them is still low. Although much progress has been achieved at laboratory scale, Industrial production and application of bioflocculant is yet to be viable due to cost of the production medium and low yield. Thus, the prospects of bioflocculant application as an alternative to chemical flocculants is linked to evaluation and utilization of cheap alternative and renewable nutrient sources. This review evaluates the latest literature on the utilization of waste/wastewater as an alternative substitute for conventional expensive nutrient sources. It focuses on the mechanisms and metabolic pathways involved in microbial flocculant synthesis, culture conditions and nutrient requirements for bioflocculant production, pre-treatment, and also optimization of waste substrate for bioflocculant synthesis and bioflocculant production from waste and their efficiencies. Utilization of wastes as a microbial nutrient source drastically reduces the cost of bioflocculant production and increases the appeal of bioflocculant as a cost-effective alternative to chemical flocculants.

Production of glycoprotein bioflocculant from untreated rice straw by a CAZyme-rich bacterium, Pseudomonas sp. HP2

It has been reported that certain biomass-degrading bacteria can produce bioflocculant through directly utilizing untreated biomass as carbon source. However, little is known about the synthesis mechanism of bioflocculant in these bacteria. In this study, a biomass-degrading bacterium Pseudomonas sp. HP2 showing excellent production ability of bioflocculant was isolated from the forest soil. The HP2 strain secreted alkali-thermo-tolerant CMCase and xylanase, with the maximum activities of 0.06 and 1.07 U ml^-1, respectively, when the untreated rice straw was used as carbon source. The maximum flocculating efficiency with the value of 92.5% was produced from untreated rice straw by HP2 strain. Component analysis showed that this bioflocculant was abundant in the amino acids and monosaccharides with the total contents of 384.9 and 478.3 mg g^-1 dry bioflocculant, respectively. The most amino acid and monosaccharide in this bioflocculant were proline and rhamnose, which accounted for 26.5% and 33.3% of total amino acids and total monosaccharides, respectively. To explore the synthesis mechanism of bioflocculant in HP2, the genome of HP2 strain was measured by Illumina HiSeq PE150 platform. The results showed that the genome of HP2 strain possessed abundant CAZy family related genes, which may play an important role in biomass degradation and bioflocculant synthesis.

Bioconversion of kitchen wastes into bioflocculant and its pilot-scale application in treating iron mineral processing wastewater

In this study, the feasibility of converting kitchen waste into bioflocculant using Bacillus agaradhaerens C9 was analyzed. The result showed that strain C9 could secrete various degrading enzymes, including amylase, protease, lipase, cellulase, xylanase and pectinase, promoting the hydrolysis of kitchen waste. Strong alkaline fermentation condition was able to induce the bioflocculant production, and inhibit the growth of contaminated bacteria, which avoids the sterilization process of kitchen waste. The optimum fermentation condition for enzymatic hydrolysis and bioflocculant production was 40 g/L kitchen waste, 37 °C, pH 9.5, and the highest bioflocculant yield of 6.92 g/L was achieved. Furthermore, bioflocculant was applied to treat pilot-scale (30 L) of mineral processing wastewater for the first time, and the removal rate of 92.35% was observed when 9 mg/L bioflocculant was added into wastewater. Therefore, this study could promote the resource utilization of kitchen waste and recycling of mineral processing wastewater.

Improving enzymatic digestibility of wheat straw pretreated by a cellulase-free xylanase-secreting Pseudomonas boreopolis G22 with simultaneous production of bioflocculants

BACKGROUND

Xylan removal by bacterial pretreatments has been confirmed to increase the digestibility of biomass. Here, an effective xylan removal technique has been developed to enhance the digestibility of wheat straw and simultaneously produce bioflocculants by a cellulase-free xylanase-secreting strain, Pseudomonas boreopolis G22.

RESULTS

The results indicated that P. boreopolis G22 is an alkaliphilic strain which can secrete abundant amounts of xylanase. This xylanase had activity levels of 2.67-1.75 U mL^-1 after an incubation period of 5-25 days. The xylanase showed peak activity levels at pH 8.6, and retained more than 85% relative activity in the pH range of 7.2-9.8. After 15 days of cultivation, the hemicellulose contents of the wheat straw were significantly decreased by 32.5%, while its cellulose contents were increased by 27.3%, compared to that of the control. The maximum reducing sugars released from the 15-day-pretreated wheat straw were 1.8-fold higher than that of the untreated wheat straw, under optimal enzymatic hydrolysis conditions. In addition, a maximum bioflocculant yield of 2.08 g L^-1 was extracted from the fermentation broth after 15 days of incubation. The aforementioned bioflocculants could be used to efficiently decolorize a dye solution.

CONCLUSIONS

The results indicate that the cellulase-free xylanase-secreting P. boreopolis G22 may be a potential strain for wheat straw pretreatments. The strain G22 does not only enhance the enzymatic digestibility of wheat straw, but also simultaneously produces a number of bioflocculants that can be used for various industrial applications.

Bioflocculants' production from a cellulase-free xylanase-producing Pseudomonas boreopolis G22 by degrading biomass and its application in cost-effective harvest of microalgae

The major problem for industrial application of bioflocculants is its high production cost. Here, a novel bacterium Pseudomonas boreopolis G22, which can secret a cellulase-free xylanase and simultaneously produce bioflocculants (MBF-G22) through directly converting untreated biomass, was isolated. The bioflocculants' production of G22 was closely related to its xylanase activity, hydrolysis ability of biomass and the hemicellulose loss caused by G22. The optimal fermentation conditions with the highest bioflocculants' yield (3.75 mg g^-1 dry biomass) were obtained at the fermentation time of 96 h, incubation temperature of 30 °C, inoculum concentration of 1.0% and biomass concentration of 1.0% in an initial pH value of 7.0. MBF-G22 mainly consisted of polysaccharides (63.3%) with a molecular weight of 3.982 × 10⁶ Da and showed the highest flocculating efficiency of 97.1% at a dosage of 3.5 mg L^-1. In addition, MBF-G22 showed high flocculating efficiency of microalgae (95.7%) at a dosage of 80 mg L^-1.

Microalgae Chlorella vulgaris biomass harvesting by natural flocculant: effects on biomass sedimentation, spent medium recycling and lipid extraction

BACKGROUND

Microalgal biomass harvesting using traditional chemicals is costly for the production of biofuels, hindering the scale-up process of the technology. Thus, the search for a cost-effective microalgal harvesting method is extremely important. Using chitosan as a natural flocculant to harvest microalgal biomass seems to be an efficient and convenient solution. Although microalgal biomass flocculation by chitosan has been reported in some previous studies, literature on the harvesting of microalgae C. vulgaris biomass using such polymer is scanty. In addition, there is limited information available on whether the usage of chitosan during the harvesting will affect downstream lipid extraction. Still, whether microalgae can be re-grown with the spent medium after chitosan flocculation is still unknown.

RESULTS

In this study, microalgal biomass harvesting using chitosan as a natural flocculant and aluminum sulfate as a traditional flocculant was compared and evaluated. Optimal doses and effects on biomass sedimentation, spent medium recycling and lipid extraction were investigated. The results showed that the optimal doses for chitosan and aluminum sulfate to achieve more than 90% biomass recovery were 0.25 and 2.5 g/L, respectively. The sedimentation time of 10 min was found to be the most appropriate to remove over 90% biomass from culture. The spent medium after chitosan flocculation could be potentially recycled for the re-cultivation of microalgae, which demonstrated robust growth in comparison with those grown in the recycled medium from aluminum sulfate flocculation. The lipid content of microalgae harvested by chitosan reached 32.9, 4.6% higher than that of those harvested by aluminum sulfate, indicating that the application of the natural flocculant would not impact the downstream extraction of microalgal lipids.

CONCLUSION

The results herein presented, demonstrated that chitosan is applicable for microalgal harvesting during the upscaling process. Flocculation method developed by using chitosan as a natural flocculant is a worthy microalgal harvesting method for microalgae-based biofuel production. There is hope that chitosan can be reasonably and technically realistically applied in a full-scale process for the harvesting of microalgal biomass.

Enhancing digestibility of Miscanthus using lignocellulolytic enzyme produced by Bacillus

In this study an effective bacterial pretreatment method was developed to improve digestibility of Miscanthus. Seven new bacterial isolates, which showed excellent xylanase production ability using Miscanthus as carbon source, were used to perform the pretreatment experiments. After pretreatment, the hemicellulose content and crystallinity index of Miscanthus were decreased, while the reducing sugars released from Miscanthus were significantly increased by 30.8-87.8% after enzymatic hydrolysis. Bacillus sp. G0 was selected to optimize the pretreatment parameters via response surface methodology due to its high reducing sugars released from Miscanthus. According to the optimal model, the pretreatment parameters were set as citrate buffer/G0 fermentation broth ratio at 0.34, pretreatment time at 100h and Tween-20 concentration at 1.73%. The reducing sugars released from Miscanthus pretreated by optimal parameters were 305mgg^-1 dry biomass. The results suggested our bacterial pretreatment approaches have great potential to increase digestibility of bioenergy crops.

Characterization of a novel bioflocculant from a marine bacterium and its application in dye wastewater treatment

Background

The identification of microorganisms with excellent flocculant-producing capability and optimization of the fermentation process are necessary for the wide-scale application of bioflocculants. Thus, we evaluated the flocculant-producing ability of a novel strain identified by the screening of marine bacteria, and we report for the first time the properties of the bioflocculant produced by Alteromonas sp. in the treatment of dye wastewater.

Results

A bioflocculant-producing bacterium was isolated from seawater and identified as Alteromonas sp. CGMCC 10612. The optimal carbon and nitrogen sources for the strain were 30 g/L glucose and 1.5 g/L wheat flour. In a 2-L fermenter, the flocculating activity and bioflocculant yield reached maximum values of 2575.4 U/mL and 11.18 g/L, respectively. The bioflocculant was separated and showed good heat and pH stability. The purified bioflocculant was a proteoglycan consisting of 69.61% carbohydrate and 21.56% protein (wt/wt). Infrared spectrometry further indicated the presence of hydroxyl, carboxyl and amino groups preferred for flocculation. The bioflocculant was a nanoparticle polymer with an average mass of 394,000 Da. The purified bioflocculant was able to remove Congo Red, Direct Black and Methylene Blue at efficiencies of 98.5%, 97.9% and 72.3% respectively.

Conclusions

The results of this study indicated that the marine strain Alteromonas sp. is a good candidate for the production of a novel bioflocculant and suggested its potential industrial utility for biotechnological processes.

Electronic supplementary material

The online version of this article (10.1186/s12896-017-0404-z) contains supplementary material, which is available to authorized users.

Recent advances in polysaccharide bio-based flocculants

Natural polysaccharides, derived from biomass feedstocks, marine resources, and microorganisms, have been attracting considerable attention as benign and environmentally friendly substitutes for synthetic polymeric products. Besides many other applications, these biopolymers are rapidly emerging as viable alternatives to harmful synthetic flocculating agents for the removal of contaminants from water and wastewater. In recent years, a great deal of effort has been devoted to improve the production and performance of polysaccharide bio-based flocculants. In this review, current trends in preparation and chemical modification of polysaccharide bio-based flocculants and their flocculation performance are discussed. Aspects including mechanisms of flocculation, biosynthesis, classification, purification and characterization, chemical modification, the effect of physicochemical factors on flocculating activity, and recent applications of polysaccharide bio-based flocculants are summarized and presented.

Complete Genome Sequence of a Novel Bioflocculant-Producing Strain, Microbacterium paludicola CC3

Microbacterium paludicola CC3 exhibits the capability to produce polysaccharide bioflocculants. Here, we report the whole-genome sequence of M. paludicola CC3, which may be helpful in understanding the genetic basis of the biosynthesis of polysaccharide bioflocculants as well as in promoting its production and application in industrial fields.

Bioflocculants' production in a biomass-degrading bacterium using untreated corn stover as carbon source and use of bioflocculants for microalgae harvest

BACKGROUND

Bioflocculation has been developed as a cost-effective and environment-friendly method to harvest multiple microalgae. However, the high production cost of bioflocculants makes it difficult to scale up. In the current study, low-cost bioflocculants were produced from untreated corn stover by a biomass-degrading bacterium Pseudomonas sp. GO2.

RESULTS

Pseudomonas sp. GO2 showed excellent production ability of bioflocculants through directly hydrolyzing various biomasses. The untreated corn stover was selected as carbon source for bioflocculants' production due to its highest flocculating efficiency compared to that when using other biomasses as carbon source. The effects of fermentation parameters on bioflocculants' production were optimized via response surface methodology. According to the optimal model, an ideal flocculating efficiency of 99.8% was obtained with the fermentation time of 130.46 h, initial pH of 7.46, and biomass content of 0.64%. The relative importance of carboxymethyl cellulase and xylanase accounted for 51.8% in the process of bioflocculants' production by boosted regression tree analysis, further indicating that the bioflocculants were mainly from the hydrolysates of biomass. Biochemical analysis showed that it contained 59.0% polysaccharides with uronic acid (34.2%), 32.1% protein, and 6.1% nucleic acid in the bioflocculants, which had an average molecular weight as 1.33 × 10⁶ Da. In addition, the bioflocculants showed the highest flocculating efficiency at a concentration of 12.5 mg L^-1 and were stable over broad ranges of pH and temperature. The highest flocculating efficiencies obtained for Chlorella zofingiensis and Neochloris oleoabundans were 77.9 and 88.9%, respectively.

CONCLUSIONS

The results indicated that Pseudomonas sp. GO2 can directly utilize various untreated lignocellulolytic biomasses to produce low-cost bioflocculants, which showed the high efficiency to harvest two green microalgae in a low GO2 fermentation broth/algal culture ratio.