Enhanced chromium (VI) removal using activated carbon modified by zero valent iron and silver bimetallic nanoparticles

Innovative zero-valent cobalt decoration on MIL-88 A(Fe)@β-CD for high-efficiency and reusable cr(VI) removal

Herein, the magnetic ZVCo-MIL-88 A(Fe)@β-CD composite was fabricated via post-synthetic decoration of MIL-88 A(Fe)@β-CD with ZVCo to produce a magnetic efficient adsorbent for Cr(VI) removal. The experimental findings denoted that the ZVCo decoration boosted the adsorption capability of MIL-88 A(Fe)@β-CD, where the adsorption % of Cr(VI) improved from 73.07 to 94.02% after its decoration with 10 wt% of ZVCo. Furthermore, the ZVCo decoration ameliorated the recycling feature of MIL-88 A(Fe)@β-CD since the removal % of Cr(VI) by MIL-88 A(Fe)@β-CD and ZVCo-MIL-88 A(Fe)@β-CD reached 27.24 and 84.98%, respectively. The optimization experiments of the Cr(VI) ions clarified that the higher adsorption % fulfilled 94.02% at pH = 3, using ZVCo-MIL-88 A(Fe)@β-CD dosage = 0.5 g/L, Cr(VI) concentration = 50 mg/L, and at room temperature. Notably, the concentration of the adsorbed Cr(VI) brings off the equilibrium stage within an hour, implying the fast adsorption property of ZVCo-MIL-88 A(Fe)@β-CD. The kinetic and isotherms assessments denoted the contribution of the physical and chemical adsorption pathways in adsorbing the Cr(VI) species onto ZVCo-MIL-88 A(Fe)@β-CD. In addition, the XPS spectra and zeta potential results supposed that the process inside the Cr(VI)/ZVCo-MIL-88 A(Fe)@β-CD system proceeded through reduction reaction, coordination bonds, electrostatic interactions, and pore-filling mechanisms.

Evaluation of Adsorption Ability of Lewatit® VP OC 1065 and Diaion™ CR20 Ion Exchangers for Heavy Metals with Particular Consideration of Palladium(II) and Copper(II)

The adsorption capacities of ion exchangers with the primary amine (Lewatit® VP OC 1065) and polyamine (Diaion™ CR20) functional groups relative to Pd(II) and Cu(II) ions were tested in a batch system, taking into account the influence of the acid concentration (HCl: 0.1-6 mol/L; HCl-HNO3: 0.9-0.1 mol/L HCl-0.1-0.9 mol/L HNO3), phase contact time (1-240 min), initial concentration (10-1000 mg/L), agitation speed (120-180 rpm), bead size (0.385-1.2 mm), and temperature (293-333 K), as well as in a column system where the variable operating parameters were HCl and HNO3 concentrations. There were used the pseudo-first order, pseudo-second order, and intraparticle diffusion models to describe the kinetic studies and the Langmuir and Freundlich isotherm models to describe the equilibrium data to obtain better knowledge about the adsorption mechanism. The physicochemical properties of the ion exchangers were characterized by the nitrogen adsorption/desorption analyses, CHNS analysis, Fourier transform infrared spectroscopy, the sieve analysis, and points of zero charge measurements. As it was found, Lewatit® VP OC 1065 exhibited a better ability to remove Pd(II) than Diaion™ CR20, and the adsorption ability series for heavy metals was as follows: Pd(II) >> Zn(II) ≈ Ni(II) >> Cu(II). The optimal experimental conditions for Pd(II) sorption were 0.1 mol/L HCl, agitation speed 180 rpm, temperature 293 K, and bead size fraction 0.43 mm ≤ f3 < 0.6 mm for Diaion™ CR20 and 0.315-1.25 mm for Lewatit® VP OC 1065. The maximum adsorption capacities were 289.68 mg/g for Lewatit® VP OC 1065 and 208.20 mg/g for Diaion™ CR20. The greatest adsorption ability of Lewatit® VP OC 1065 for Pd(II) was also demonstrated in the column studies. The working ion exchange in the 0.1 mol/L HCl system was 0.1050 g/mL, much higher compared to Diaion™ CR20 (0.0545 g/mL). The best desorption yields of %D1 = 23.77% for Diaion™ CR20 and 33.57% for Lewatit® VP OC 1065 were obtained using the 2 mol/L NH3·H2O solution.

Advancements in removing common antibiotics from wastewater using nano zero valent iron

The pollutants such as heavy metals, organic matter, and nitrates in soil and water pose challenges to environmental remediation technology. Nano zero valent iron has shown enormous potential in the field of environmental remediation due to its excellent adsorption performance. By using carbon based materials, rock minerals, biomolecules, etc., as supporting materials for nZVI, and through structural and performance modifications, its performance has been successfully optimized, reducing defects such as aggregation and easy oxidation of the material. This article compares and summarizes the modification effects of different loadings on nZVI, and comprehensively reviews the latest progress, preparation methods, and application of nZVI particles in soil and water remediation. Specifically, this article explores in detail the impact and mechanism of nZVI particles in commonly used antibiotics contaminated environments. Firstly, the combination methods of different types of materials with zero valent iron, as well as the synthesis methods and application scenarios of nZVI, were integrated. Secondly, the interaction mechanism between pollutants and nZVI was introduced in detail, including adsorption, redox reactions, and co-precipitation. Subsequently, environmental factors that affect repair efficiency were emphasized, such as pH value, coexisting components, oxygen, contact time, and temperature. Finally, the challenges faced by the application of nZVI in actual polluted soil and water bodies, as well as the prospects for its long-term efficacy and safety evaluation, are proposed to promote further development in the future.

Synthesis and photodegradation performance of a heterostructure ferromagnetic photocatalyst based on MWCNTs functionalized with (3-glycidyloxypropyl)trimethoxysilane and decorated with tungsten trioxide for metronidazole and acetaminophen degradation in aqueous environments

The presence of metronidazole (MNZ) and acetaminophen (ACE) in aquatic environments has raised growing concerns regarding their potential impact on human health. Incorporating various patterns into a photocatalytic material is considered a critical approach to achieving enhanced photocatalytic efficiency in the photocatalysis process. In this study, WO3 nanoparticles, which were immobilized onto ferromagnetic multi-walled carbon nanotubes that were functionalized using (3-glycidyloxypropyl)trimethoxysilane (FMMWCNTs@GLYMO@WO3), exhibited remarkable efficiency in removing MNZ and ACE (93% and 97%) in only 15 min. In addition, the new visible-light FMMWCNTs@GLYMO@WO3 nanoparticles as a magnetically separable photocatalyst were characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction analysis (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), EDS-mapping, vibrating sample magnetometry (VSM), thermogravimetric analysis (TGA), diffuse reflectance spectroscopy (DRS), high-performance liquid chromatography (HPLC), and total organic carbon (TOC) due to detailed studies (morphological, structural, magnetic and optical properties) of the photocatalyst. In-depth spectroscopic and microscopic characterization of the newly developed ferromagnetic FMMWCNTs@GLYMO@WO₃ (III) photocatalyst revealed a spherical morphology, with nanoparticle diameters averaging between 23 and 39 nm. Compared to conventional multiwall carbon nanotube and WO₃ photocatalysts, FMMWCNTs@GLYMO@WO₃ (III) demonstrated superior photocatalytic activity. Remarkably, it exhibited excellent reusability, maintaining its efficiency over a minimum of five cycles in the degradation of metronidazole (MNZ) and acetaminophen (ACE).

Recent advances in bimetallic nanoscale zero-valent iron composite for water decontamination: Synthesis, modification and mechanisms

The environmental pollution of water is one of the problems that have plagued human society. The bimetallic nanoscale zero-valent iron (BnZVI) technology has increased wide attention owing to its high performance for water treatment and soil remediation. In recent years, the BnZVI technology based on the development of nZVI has been further developed. The material chemistry, synthesis methods, and immobilization or surface stabilization of bimetals are discussed. Further, the data of BnZVI (Fe/Ni, Fe/Cu, Fe/Pd) articles that have been studied more frequently in the last decade are summarized in terms of the types of contaminants and the number of research literatures on the same contaminants. Five contaminants including trichloroethylene (TCE), Decabromodi-phenyl Ether (BDE209), chromium (Cr(VI)), nitrate and 2,4-dichlorophenol (2,4-DCP) were selected for in-depth discussion on their influencing factors and removal or degradation mechanisms. Herein, comprehensive views towards mechanisms of BnZVI applications including adsorption, hydrodehalogenation and reduction are provided. Particularly, some ambiguous concepts about formation of micro progenitor cell, production of hydrogen radicals (H·) and H2 and the electron transfer are highlighted. Besides, in-depth discussion of selectivity for N2 from nitrates and co-precipitation of chromium are emphasized. The difference of BnZVI is also discussed.

Adsorption of Chromium, Copper, Lead, Selenium, and Zinc ions into ecofriendly synthesized magnetic iron nanoparticles

The iron nanoparticles (Fe-NPs) have been synthesized using an environmentally friendly and simple green synthesis method. This study aims to obtain an aqueous extract from natural material wastes for synthesizing Fe-NPs. The produced Fe-NPs were evaluated as adsorbents for removing Pb, Se, Cu, Zn, and Cr from aqueous solutions. The formation of Fe-NPs was observed on exposure of the aqueous extract to the ferrous chloride and ferric chloride solutions. The characterization of the synthesized Fe-NPs was carried out using different instrumental techniques. As a function of the initial metal ion concentration, contact time, and various doses, the removal of the heavy metal ions was investigated. The UV-Vis spectrum of Fe-NPs showed a peak at 386 nm, 386 nm, 400 nm, 420 nm, 210 nm, 215 nm, and 272 nm of banana, pomegranate, opuntia, orange, potato, and onion, respectively. The FT-IR spectra confirmed the attachment of bioactive molecules from plants on the Fe-NPs surface. The effective reduction of metal ions was greatly aided by the -OH functional groups. The functional groups were examined and responsible for adsorption process by nanoparticle powder sample, these peaks are 3400 cm-1, 2900 cm-1, 1600 cm-1,1000 cm-1, and 1550 cm-1. The magnetization measurements revealed superparamagnetic behavior in the produced iron oxide nanoparticles. Heavy metal ions uptake followed a time, dose, and initial concentration-dependent profile, with maximum removal efficiency at 45 min, 0.4 g, and 3.0 mg/L of metal concentration, respectively.

Chitosan-stabilized iron-copper nanoparticles for efficient removal of nitrate

Chitosan-stabilized iron-copper nanomaterials (CS-nZVI/Cu) were successfully prepared and applied to the nitrate removal. Batch experiments were conducted to examine the effects of experimental parameters on nitrate removal, including Cu loading, CS-nZVI/Cu dosages, initial nitrate concentrations, and initial pHs. From the experimental date, it was concluded that CS-nZVI/Cu has a high nitrate removal efficiency, which can be more than 97%, respectively, at Cu loading = 5%, dosages of CS-nZVI/Cu = 3 g/L, initial nitrate concentrations of 30~120 mg/L, and initial pH values = 2~9. Additionally, the kinetic data for CS-nZVI/Cu were found to fit well with the first-order kinetic model with a rate constant of 0.15 (mg∙L)1-n/min, where n=1. The Langmuir model showed a good fit for NO3- removal, indicating that monolayer chemisorption occurred. The SEM and TEM analyses showed that the addition of chitosan resulted in improved dispersion of the CS-nZVI/Cu. The CS-nZVI/Cu nanomaterials have a more complete elliptical shape and are between 50 and 100 nm in size. The XRD analysis showed that the chitosan encapsulation reduced the oxidation of the iron component and the main product was Fe3O4. The FT-IR analysis showed that the immobilization of chitosan and the iron was accomplished by the ligand interaction. The nitrogen adsorption-desorption isotherm results showed that the CS-nZVI/Cu specific surface area and pore volume decreased significantly after the reaction. Adsorption, oxidation, and reduction are possible mechanisms for nitrate removal by CS-nZVI/Cu. The XPS analysis investigated the contribution of nZVI and Cu in the removal mechanism. Adding copper accelerates the reaction time and rate. In addition, nZVI played a vital role in reducing nitrate to N2. Based on these results, it looks like CS-nZVI/Cu could be a satisfactory material for nitrate removal.

Optimization and Modeling of Cr (VI) Removal from Tannery Wastewater onto Activated Carbon Prepared from Coffee Husk and Sulfuric Acid (H2SO4) as Activating Agent by Using Central Composite Design (CCD)

The primary goal of this research is to lower the hexavalent chromium (Cr (VI)) concentration that has occurred from the growth of the tannery industry. As a result, the potential for heavy metal concentration is increasing day by day. Industrial effluent containing Cr (VI) contributes significantly to water pollution. Chromium hexavalent ion (Cr (VI)) in wastewater is extremely hazardous to the environment. It is critical to address such a condition using activated carbon derived from biomass. Adsorption is one of the most successful methods for removing hexavalent chromium from wastewater. Treated wastewater has no substantial environmental contamination consequences. The ash content, moisture content, volatile matter content, and fixed carbon content of wet coffee husk were 3.51, 10.85, 68.33, and 17.31, respectively. The physicochemical properties of coffee husk-based activated carbon (CHBAC) obtained during experimentation were pH, porosity, the yield of CHBAC, bulk density, point of zero charges, and specific surface area of 5.2, 58.4 percent, 60.1 percent, 0.71 g/mL, 4.19, and 1396 m2/g, respectively, indicating that CHBAC has a higher capacity as an adsorbent medium. For optimization purposes, the parameters ranged from pH (0.3–3.7), dose (2.3–5.7) $g$ , and contact time (0.3–3.7) hr. The quadratic models were chosen for optimization, and the $p$ value for the model was significant since it was less than 0.05, but the lack of fit model was inconsequential because it was more than 0.05. The optimum adsorption obtained with numerical optimization of Cr (VI) was 97.65 percent. This was obtained at a pH of 1.926, a dose of 4.209 g/L, and a contact time of 2.101 hours. This result was observed at a pH of 1.93, a dosage of 4.2 g/L, and a contact duration of 2.1 hours. The desirability obtained during numerical optimization was 1. Coffee husk-based activated carbon has a bigger surface area, and it has a stronger ability to absorb hexavalent chromium from tannery wastewater effluents.

High Adsorption of Hazardous Cr(VI) from Water Using a Biofilter Composed of Native Pseudomonas koreensis on Alginate Beads

Most conventional methods to remove heavy metals from water are efficient for high concentrations, but they are expensive, produce secondary pollution, and cannot remove low concentrations. This paper proposes a biological system to remove Cr(VI) from aqueous solutions; the biofilter is composed of a native Pseudomonas koreensis immobilized in calcium alginate beads. Lab experiments were conducted in batch reactors, considering different operating conditions: Cr(VI) concentration, temperature, pH, and time. At 30 °C and a pH of 6.6, the immobilized bacteria achieved their optimal adsorption capacity. In the chromium adsorption system, saturation was reached at 30 h with a qmax = 625 mg g-1. By adjusting the experimental data to the Langmuir and Freundlich models, it is suggested that P. koreensis forms a biofilm with a homogeneous surface where Cr(VI) is adsorbed and that the bacteria also incorporates the metal in its metabolism, leading to a multilayer adsorption. On the other hand, using Fourier transform infrared spectroscopy, it was inferred that the functional groups involved in the adsorption process were O-H and C=O, which are a part of the P. koreensis cell wall.

Facile Synthesis of NiO-CuO/Activated Carbon Nanocomposites for Use in the Removal of Lead and Cadmium Ions from Water

In this work, activated carbon (AC) was synthesized and then modified using nickel(II) oxide and copper(II) oxide. Pure-AC, 10, 20, 30, and 40 wt % nanohybrid NiO-CuO/AC nanocomposites (χ-NC/AC NCs) were characterized using XRD, IR, EDS, surface area, and FE-SEM techniques. Furthermore, the adsorbents obtained were tested for their ability to remove hazardous Pb(II) and Cd(II) from water. The fabricated x-NC/AC NC adsorbents showed the highest adsorptive performance toward the adsorption of Pb(II) and Cd(II) from water. The 30-NC/AC NC adsorbent showed the complete removal of Pb(II) at pH = 5 and Cd(II) at pH = 7 within 30 min. Overall, the obtained superior experimental results suggest that the adsorptive performance of AC was greatly enhanced after loading hybrid metal oxide nanoparticles, so its application in water treatment is potential and applicable.

Kinetics and Thermodynamics of β-Carotene Adsorption onto Acid-Activated Clays Modified by Zero Valent Iron

The adsorption of β-carotene from crude palm oil onto acid-activated clay and clay modified by zero valent iron (ZVI) was investigated in this work. Spectroscopic studies including FTIR, XRD, and SEM were used for its characterization. The adsorption characteristics such as kinetics, mechanism, isotherms, and thermodynamics of β-carotene were studied. The kinetic data were analyzed using the pseudo-first-order kinetic equation, pseudo-second-order kinetic equation, and intraparticle diffusion model. The pseudo-second-order kinetic model is the only one that describes the experimental data well (R2 ≥ 0.969). The chemical analysis of bulk clay showed that the predominant oxides are Al2O3 (57.91 wt%), Fe2O3 (32.54 wt%), SiO2 (3.09 wt%), K2O (2.37 wt%), and CaO2 (1.73 wt%). The adsorption capacity increases with an increase in temperature. The equilibrium data were described better by the Freundlich model for all clays. To determine the best fit kinetic model for each system, three error analysis methods, namely, chi-square (χ2), residual mean squared error (RMSE), and mean percent error (%APE) were used to evaluate the data. A thermodynamic study demonstrated that β-carotene adsorption is spontaneous, endothermic, and an entropy driven process for both forms of clay.

Nanoscale zero-valent iron/silver@activated carbon-reduced graphene oxide: Efficient removal of trihalomethanes from drinking water

AC-supported nanoscale zero-valent iron composites (nZVI/AC) exhibit significant environmental implications for trihalomethanes (THMs)-contaminated water remediation. To improve the adsorption and degradation capability of AC, herein, a composite (nZVI/Ag@AC-RGO) consisting of AC, reduced graphene oxide (RGO), nanoscale zero-valent iron (nZVI), and silver (Ag) was synthesized and characterized using several techniques, such as scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy, N₂ adsorption-desorption isotherms, and X-ray photoelectron spectroscopy (XPS). The analysis of textural and morphological structures showed that a tightly-attached RGO film, amorphous iron, and weak crystal silver nanoparticles with a size of 20-30 nm were evenly immobilized on the support. Specific surface area increased by 19.12% after supporting RGO, while it decreased after supporting nZVI and Ag due to the partial blockage of micropores. The Fe surface was concurrently coated by iron oxides (Fe₂O₃, FeOOH) and Ag. THMs were eliminated through multilayer reaction processes. The values of the adsorption constant (K_F) of chloroform (CHCl₃), dichlorobromoethane (CHBrCl₂), dibromochloroethane (CHBr₂Cl), and tribromomethane (CHBr₃) adsorbed by nZVI/Ag@AC-RGO increased by 34.4, 33.7, 81.6, and 67.3%, respectively, compared to pristine AC. THMs with more Br atoms exhibited better removal efficiency and adsorption capacity, along with a higher oxidation degree of the Fe surface. CHBrCl₂ and CHBr₂Cl mainly decomposed into chloromethane (CH₃Cl) and dichloromethane (CH₂Cl₂), and CHBr₃ and CHCl₃ primarily degraded into dibromomethane (CH₂Br₂) and CH₂Cl₂, respectively, along with generating Cl^- and Br^-. Conclusively, THMs-contaminated water could be remediated by coupling AC pre-enrichment and the reactivity of nZVI/Ag.

Removal of Chromium (VI) and Lead (II) from Aqueous Solution Using Domestic Rice Husk Ash- (RHA-) Based Zeolite Faujasite

Rice husk ash (RHA), is a widely available biobased source for high purity silica. In this work, zeolite Faujasite (FAU) is synthesized using extracted silica from RHA (collected from a local region of Bangladesh). The synthesized zeolite FAU was used as an adsorbent for Cr(VI) and Pb (II) batch-wise adsorptive removal from respective aqueous solution. The synthesized zeolite FAU was characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), nitrogen-sorption, and Fourier transfer infrared (FT-IR) spectroscopy. Metal ion adsorption studies were performed by varying metal concentration (20–100 mg/L for Cr(VI) and 900–133 mg/L for Pb(II)), sorbent dosage (2–10 g/L for chromium and 0.5–1.5 g/L for lead), and contact time (10–120 min for both metal ions). The maximum adsorption capacity of RHA-based zeolite FAU was found to be 3.56 mg/g and 342.16 mg/g for Cr(VI) and Pb(II), respectively. Since the sorption data was found to match with Langmuir isotherm, a monolayer adsorption was occurred. The regeneration of the RHA-based zeolite FAU by NaCl solution showed the potential of repeated as well as continuous operation.

Adsorption removal and photocatalytic degradation of azithromycin from aqueous solution using PAC/Fe/Ag/Zn nanocomposite

The improper use of antibiotics and their discharge into the environment can have serious and hazardous consequences. The purpose of this research is to synthesize an activated carbon impregnated magnetite composite (PAC/Fe), prepare PAC/Fe/Ag/Zn nanocomposites, and innovate by simultaneously synthesizing two metals, zinc and silver, on magnetically activated carbon and check its ability to remove azithromycin antibiotic (AZT) from an aqueous solution via UV system. PAC/Fe/Ag/Zn nanocomposites were characterized by various techniques including XRD, FESEM, and EDX. A series of batch experiments were carried out under various experimental conditions such as pH of the solution (3-11), contact time (0-120 min), initial concentration of AZT (10-40 ppm), amount of PAC/Fe/Ag/Zn nano-absorbent (0.01-0.04 g/l), and recoverability and reuse. Some common isotherm models were used for the study of AZT adsorption removal and finding the best model. Also, kinetic studies of AZT removal were performed by fitting the experimental data on first-order and second-order models. In this system, under optimal conditions of pH = 9, 120 min with 0.04 g/l of PAC/Fe/Ag/Zn, 99.5% of 10 ppm AZT were degraded under UV-C irradiation. Furthermore, the obtained results of isotherm and kinetic studies revealed that Langmuir (R² = 0.9336) isotherm model, and the pseudo-first-order kinetic model (R² = 0.9826) had the highest correlation with the experimental data of AZT antibiotic adsorption. Finally, the reusability experiments showed that PAC/Fe/Ag/Zn nanocomposites have a high ability of antibiotic adsorption and high stability after four cycles of application (99.5 to 40%).

Modified geosynthetic clay liners bentonite for barriers of Cr (VI) in contaminated soil

Hydroxy-Fe-Al and cetyltrimethylammonium bromide (CTMAB) were chosen to modified Na-bentonite (Na-bent). The characteristics of Na-bent and modified bentonites were determined with scanning electron microscopy (SEM), energy disperse spectroscopy (EDS), X-ray diffraction (XRD), Fourier transform infrared spectrum (FTIR) and zeta potential. It was found that CTMAB mainly entered the interlayer and hydroxy-Fe-Al groups were mostly loaded on the external surface of the Na-bent, respectively. The efficiency to remove Cr (VI) of Na-bent, organic modified bentonite (O-bent), inorganic modified bentonite (I-bent) and composite modified bentonite (Co-bent) followed the order: Co-bent > I-bent > O-bent > Na-bent. Adsorption experiments were carried out by the batch contact method. The highest removal rate of Cr (VI) by Co-bent was found to be 96.2% at optimal pH = 4. The Cr (VI) uptake on Co-bent from 50 mg/L solution rapidly attained equilibrium within 10 min, and the pesudo-second-order kinetic model could provide satisfactory fitting of the kinetic data (R² = 0.999) compared to the intraparticle diffusion model (R² = 0.585). The adsorption data were applied to the Langmuir, Freundlich, Temkin isotherm model. The Langmuir was found to be the most suitable equation to fit the experimental data (R² = 0.956) with a high Cr (VI) adsorption capacity of 27.472 mg/g, and R_L values (0.012-0.035) also indicated the adsorption could be accepted. The present study confirmed that Co-bent would be one of candidates for Cr (VI) adsorbent.

Green synthesis of zero-valent iron nanoparticles and loading effect on activated carbon for furfural adsorption

The adsorption techniques are extensively used in dyes, metronidazole, aniline, wastewater treatment methods to remove certain pollutants. Furfural is organic in nature, considered a pollutant having a toxic effect on humans and their environment and especially aquatic species. Due to distinct characteristics of the adsorption technique, this technique can be utilized to adsorb furfural efficiently. As an environmentally friendly technique, the pomegranate peel was used to synthesized activated carbon and nanostructure of zerovalent iron impregnated on the synthesized activated carbon. The physicochemical and crystallinity characterization was done using Fourier transmission infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), and Field emission scanning electron microscopy (FESEM). The nanoparticles are porous in structure having 821.74 m²/g specified surface area. The maximum amount of the adsorbent pores in the range of 3.08 nm shows the microporous structure and enhancement in adsorption capacity. The effects of increment in concentration of adsorbent, pH, reaction contact time and adsorbent dose, isothermal and kinetic behaviour were investigated. At the UV wavelength of 227 nm furfural adsorption was detected. The separation of the furfural from the aqueous solution was calculated at the 1 h reaction time at the composite dosage of 4 g/L, 250 mg/L adsorbent concentration and pH kept at 7. The 81.87% is the maximum removal attained by the nanocomposite in comparison to the activated carbon is 62.06%. Furfural adsorption was also analyzed by using the equations of isothermal and kinetics models. The adsorption process analysis depends on the Freundlich isotherm and Intra-particle diffusion than the other models. The maximum adsorbent of the composite was determined by the Langmuir model which is 222.22 mg/g. The furfural removal enhances as the adsorbent dose enhances. The developed zerovalent iron nanoparticles incorporated on activated carbon (AC/nZVI) from pomegranate peel extract are feasible as an efficient and inexpensive adsorbent to eliminate furfural from a liquid solution.

Prediction of methyl orange removal by iron decorated activated carbon using an artificial neural network

Date Stones were used as a bio-degradable waste source for preparing iron impregnated activated carbon. The prepared activated carbon-containing oxides of iron were characterized using SEM, XRD, FTIR, and BET. The specific surface area of the iron decorated activated carbon was 738.65 m²/g. The XRD confirmed the presence of magnetite and hematite while the SEM images assured the presence of pores. The prepared activated carbon was used to remove methyl orange from wastewater. Genetic Algorithm was used to develop a model which could predict the removal efficiency of the dye. The ANN model was validated and the effect of different parameters like adsorbent dosage (0.1-1 g/L), initial dye concentration (2-20 mg/L), pH (2-11), time (10-55 min) and temperature (30-75°C) was estimated both experimentally and predicted using the model. The adsorption process follows the Freundlich isotherm and pseudo-second-order kinetic model. The values of 1/n and K_F obtained from the Freundlich isotherm designate good adsorption capacity. Both experimental and model-predicted data agrees with the kinetic model. The adsorption rate is proportionate to the square of the number of vacant adsorption sites. From the thermodynamic study, the positive worth of ΔH° indicates the energy-absorbing nature of the surface assimilation method and the process is endothermic in nature. The low values of each ΔG° (-200 to 0 kJ/mol) and ΔH° correspond to physical surface assimilation. A positive worth of ΔS° reflects the inflated randomness at the solid-aqueous interface with some structural changes in adsorbate and adsorbent.

Development of copper-iron bimetallic nanoparticle impregnated activated carbon derived from coconut husk and its efficacy as a novel adsorbent toward the removal of chromium (VI) from aqueous solution

The present work demonstrates the preparation of biodegradable coconut husk derived activated carbon (CAC) impregnated with bimetallic nanoparticles consisting of zerovalent iron and copper to produce a new adsorbent (Fe⁰ /Cu-CAC). The new adsorbent was further employed to determine the removal efficiency of Chromium (VI) from aqueous solutions. Chromium (VI) adsorption process by Fe⁰ /Cu-CAC was found to be favorable at pH ~ 3, attaining 95.28% removal efficiency while its counterpart CAC attained only ~41%. Negative ΔG⁰ value suggests that the process was thermodynamically spontaneous and ΔH⁰ was observed to be 8.496 kJ/mol, further corroborating the endothermic nature of the process. Pseudo-second order model was best suited to explain the kinetics of the process with R² value of 0.99683 and an error of 6.73%. Equilibrium parameter (R_L ) derived from Langmuir isotherm was calculated to be 0.1103, indicating favorable adsorption and thus Langmuir isotherm can be used to describe the process of adsorption of Cr (VI) by Fe⁰ /Cu-CAC. Finally, a maximum monolayer adsorption capacity of 173.9 mg/g indicated the suitability of the prepared adsorbent in treating chromium contaminated wastewater streams. PRACTITIONER POINTS: Facile development of novel adsorbent from biodegradable coconut husk via cost effective route. Utilization of the adsorbent towards removal of toxic pollutant like Cr (VI) from its aqueous solution. Validation of the effective adsorption mechanism by Kinetic and Thermodynamic study.

Chromium Laden Soil, Water, and Vegetables nearby Tanning Industries: Speciation and Spatial Distribution

This study investigates the spatial distribution and speciation of chromium in water, soil, and edible plants in tannery-contaminated areas at Modjo city, Ethiopia. Modjo city is one of the industrial zones in the country, which is dominated by tanneries due to the ease of effluent discharge and water use from the nearby Modjo River crossing the city. The river, which received chromium-containing effluent from the tanneries, is also used for urban gardening of edible plants besides other domestic purposes. 12 water and 12 soil samples from contaminated areas and 6 samples from different edible plants grown nearby tanneries were collected following the standard procedure to predict the level of chromium contamination in the environment and its health risk. The total chromium in Modjo River was 20.6 mg L−1 in the upstream region which later was significantly reduced (r = –0.93, $p<0.05$ ) to 0.126 mg L−1 in the very downstream region. However, the Cr (VI) concentration ranges from 0.23 ± 0.032 to 2.82 ± 0.02 mg L−1 with a statistically insignificant decrease (r = -0.76, $p>0.05$ ) to the downstream sampling points. The lowest Cr (III) and Cr (VI) concentrations in the soil were 2.78 ± 0.37 and 4.57 ± 1.01 mg kg−1, respectively, which are higher ( $p<0.05$ ) than the control and the guideline values. Similarly, the chromium concentration in the edible plants was also 7.98 ± 0.63 mg kg−1 for green pepper to 14.45 ± 0.34 mg kg−1 for carrot with a trend of carrot > beetroot > lettuce > cabbage > tomato > green pepper. The chromium in the plants from the contaminated area was significantly higher ( $p<0.05$ ) than the control area, which is between 0.14 mg kg−1 for lettuce and 0.31 ± 0.01 mg kg−1 for tomato. It is also confirmed that the root part of plants accumulates more chromium than the leaf and the fruits. It is concluded that water and soil in tannery surroundings and edible plants grown in the area contain chromium concentrations higher than the recommended amount for a healthy environment and human consumption. Therefore, appropriate wastewater treatment, stringent regulations, and public awareness are recommended to reduce chromium contamination and its impact on public health and the environment.

Thermodynamics, kinetics and isothermal studies of chromium (VI) biosorption onto Detarium senegalense stem bark extract coated shale and the regeneration potentials

A low-cost adsorbent (Detarium senegalense stem bark extract coated shale (DSMS)) comprising pristine shale (PSH) coated with D. senegalense stem bark extract was prepared and utilized for the adsorption of Cr(VI). The DSMS and PSH were characterized by the SEM, XRD, FTIR, EDX, TGA, and BET. The batch adsorption experiment results showed that DSMS exhibited an excellent ability to adsorb chromium with a maximum removal occurring at pH 2, dosage of 0.05 g and 180 min contact time. The adsorption process was best described by the pseudo-second-order for DSMS and Elovich model for PSH which depicts chemisorption as the major mechanism responsible for the uptake of Cr(VI) onto the adsorbents. Langmuir model provided the best fit to the isotherm analysis on both materials. The maximum adsorption capacity of DSMS and PSH were 64.98 mg g^-1 and 29.97 mg g^-1 respectively. The thermodynamics revealed that the adsorption of Cr(VI) was feasible, endothermic and entropy driven. Furthermore, after five cycles of reuse, both DSMS and PSH demonstrated effective regeneration and reusability for Cr(VI) uptake. The structural properties, reusability, and high adsorption capabilities of DSMS indicate that they could be used as low-cost adsorbents in large-scale Cr(VI) wastewater treatment. Novelty statement Plant extracts are packed with a variety of polyphenolic compounds, such as aldehydes, alcohols, carboxylics, ethers, ketones, and phenols which contains several functionalities useful in the adsorption of toxic metals. Despite this, research on the use of plant extracts in the modification of adsorbent materials for enhanced adsorption is rare. This study reports for the first time the use of Detarium senegalense stem bark extract coated shale adsorbent for the efficient uptake of Cr(VI) ion.

Kinetics and Isotherm Studies on Adsorption of Hexavalent Chromium Using Activated Carbon from Water Hyacinth

The present study is focused on the use of activated carbon derived from water hyacinth (WH-AC) as adsorbent for the removal of Cr(VI) from aqueous solution. The optimized WH-AC was found to be mesoporous and considered as granular. The surface area of 11.564 m2/g was found to have a good adsorption capacity. The adsorption data of the optimized WH-AC followed a pseudo-second order kinetics and the Freundlich isotherm model. Based on the correlation coefficient obtained from pseudo-second-order kinetic model, the R2 values were all above 0.99, which is closer to unity of one (1) indicating that it followed a chemisorption process. The adsorption capacity of WH-AC increased from 1.98 to 4.68 mg/g when adsorbate concentration increased from 20 to 50 mg/l. The overall study proved that the adsorption by activated carbon derived from water hyacinth can be an alternative and efficient technique in hexavalent chromium removal.

Effect of hexavalent chromium on the environment and removal techniques: A review

Despite the importance of chromium (Cr) in most anthropogenic activities, the subsequent environmental adulteration is now a source of major concern. Cr occurs in numerous oxidation states, with the furthermost stable and frequently occur states being Cr(0), Cr(III) and Cr(VI). Cr(0) and Cr(III) are vital trace elements while Cr(VI) is dispensable and noxious to living organisms. Predominantly in plants, Cr at low concentrations of about 0.05-1 mg/L assist to boost growth as well as increase productivity. However, accumulation of Cr could represent a potential threat to living organisms. Cr absorption, displacement and accretion depend on its speciation, which also determines its toxicity which is often diverse. Indications of its toxicity include; reduction of seed germination, retardation of growth, reduction of yield, inhibition of enzymatic activities, weakening of photosynthesis, nutrient, oxidative disparities and genetic mutation in plants as well as several injurious diseases in animals and humans. In this study, we have presented a comprehensive review as well as an informative account of the influence of Cr on the environment drawn from researches carried out over the years following an analytical approach. Uniquely, this work presents a review of the effects and remediation of Cr from soil and wastewater drawn from several evidence and meta-data-based articles and other publications. Accordingly, the write-up is intended to appeal to the consciousness of the general public that the significance of Cr notwithstanding, its environmental toxicity should not be taken for granted.

Optimization Modeling of nFe0/Cu-PRB Design for Cr(VI) Removal from Groundwater

Hexavalent chromium is one of the highly toxic heavy metals which could lead to severe health issues when it is discharged into aquifers as industrial wastewater. In the current study nFe0/Cu was successfully employed in PRB technology for Cr(VI) removal from groundwater. Batch and column experiments confirmed the high reactive performance of nFe0/Cu towards Cr(VI) removal by around 85% removal efficiency. The main pathways for Cr-species removal by nFe0/Cu were determined as the reduction of Cr(VI) to Cr(III) by both nFe0 and Cu0 and the precipitation/co-precipitation of Cr(III) with the released iron oxides on the nFe0/Cu surface. The developed 3D-surface response optimization model confirmed the reciprocal relation between the residence time, barrier thickness and hydraulic conductivity. The interaction and sensitivity analysis between the model’s parameters were significantly crucial for defining the optimal design conditions of the nFe0/Cu-PRB. Generally, the current study could represent a great contribution in scaling-up the PRB technology towards the real field applications.

Modeling and optimizing parameters affecting hexavalent chromium adsorption from aqueous solutions using Ti-XAD7 nanocomposite: RSM-CCD approach, kinetic, and isotherm studies

BACKGROUND

Due to the high toxicity of chromium, particularly as Hexavalent chromium Cr (VI), it is removed from industrial effluents before their discharge into the environment by a variety of methods, including loading catalysts onto the polymeric supports. This study focused on the removal of Cr(VI) from aqueous solutions using Amberlite XAD7 resin loaded titanium dioxide (Ti-XAD7).

METHODS

Ti-XAD7 was synthesized using Amberlite XAD-7 impregnated with titanium tetraethoxide. The prepared Ti-XAD7 was characterized by using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and X-ray diffraction (XRD). Isotherms and kinetic studies were carried out to describe the adsorption behavior of adsorbent for the removal of Cr(VI) ions. Quadratic models considering independent variables, i.e. the initial Cr(VI) concentration, adsorbent dosage, time, and pH, were evaluated and optimized to describe the behavior of Cr(VI) adsorption onto the Ti-XAD7 using RSM based on a Five-level-four-factor CCD approach.

RESULTS

The accuracy and the fitting of the model were evaluated by ANOVA with R² > 0.725 and P value = 5.221 × 10^-5. The optimum conditions for the adsorption process were an initial Cr(VI) concentration 2750 ppb, contact time of 51.53 min, pH of 8.7, and Ti-XAD7 dosage of 5.05 g/L. The results revealed that the Langmuir and Sips isotherm models with R² = 0.998 and 0.999 were the best models fitting the experimental data. The adsorption capacity of Ti-XAD7 and R_L constant were 2.73 mg/g and 0.063-0.076 based on the Langmuir isotherm, respectively. Kinetic studies also indicated that the adsorption behavior of Cr(VI) was acceptably explained by the Elovich kinetic model with a good fitting (R² = 0.97).

CONCLUSIONS

Comparison of the Ti-XAD7 and XAD7 yield in chromium adsorption showed that modified XAD7 had higher removal efficiency (about 98%) compared to XAD7 alone.

Arsenic Removal from Water by Adsorption onto Iron Oxide/Nano-Porous Carbon Magnetic Composite

This study aimed to develop magnetic Fe3O4/sugarcane bagasse activated carbon composite for the adsorption of arsenic (III) from aqueous solutions. Activated carbon (AC) was prepared from sugarcane bagasse by chemical activation using H3PO4 as an activating agent at 400 °C. To enhance adsorption capacity for arsenic, the resultant AC was composited with Fe3O4 particles by facile one-pot hydrothermal treatment. This method involves mixing the AC with aqueous solution of iron (II) chloride tetrahydrate, polyvinyl pyrrolidone (PVP), and ethanol. Batch adsorption experiments were conducted for the adsorption of As (III) onto the composite. The effects of pH, adsorbent dosage, and contact time on the arsenic adsorption were studied. The result showed that the composite could remove the arsenic from the water far more effectively than the plain AC. The highest percentage of arsenic removal was found at pH at 8, adsorbent dose of 1.8 g/L, and contact time of 60 min. Langmuir and Freundlich adsorption isotherm was used to analyze the equilibrium experimental data. Langmuir model showed the best fit compared to the Freundlich model with a maximal capacity of 6.69 mg/g. These findings indicated that magnetic Fe3O4/sugarcane bagasse AC composite could be potentially applied for adsorptive removal of arsenic (III) from aqueous solutions.

Removal of vanadium and palladium ions by adsorption onto magnetic chitosan nanoparticles

Chitosan (CS), synthesized from chitin chemically extracted from shrimp shells, was used for the synthesis of magnetic chitosan nanoparticles (Fe₃O₄-CSN), which makes the adsorbent easier to separate. Fe₃O₄-CSN was used for the removal of toxic metals such as vanadium (V(V)) and palladium (Pd(II)) ions from aqueous solutions. Influencing factors on the adsorption process such as pH, contact time, adsorbent dosage, and agitation speed were investigated. A competitive adsorption of V(V) and Pd(II) ions for the active sites was also studied. The monolayer maximum adsorption capacities (Q_m) of 186.6 and 192.3 mg/g were obtained for V(V) and Pd(II) ions, respectively. The pseudo-second-order equation gave the best fit for the kinetic data, implying that chemisorption was the determining step. Freundlich model yielded a much better fit than the other adsorption models assessed (Langmuir, Temkin and Dubinin-Radushkevich). Thus, the adsorption of V(V) and Pd(II) ions onto Fe₃O₄-CSN is a combination of physical and chemical adsorption, as based on the kinetics and equilibrium study. Generally, physical adsorption is the mechanism that governs the system, while chemical adsorption is the slowest adsorption step that takes place. Thermodynamic studies displayed that the adsorption process was exothermic and spontaneous. Removal efficiencies of 99.9% for V(V) and 92.3% for Pd(II) ions were achieved, implying that Fe₃O₄-CSN adsorbent had an excellent ability for the removal of the metal ions from real industrial wastewaters without remarkable matrix effect. Graphical abstract ᅟ.

Simultaneous removal of cationic methylene blue and anionic reactive red 198 dyes using magnetic activated carbon nanoparticles: equilibrium, and kinetics analysis

For the simultaneous adsorption of cationic dye (methylene blue, MB) and anionic dye (reactive red 198, RR198) from aqueous solution, magnetic activated carbon (MAC) nanocomposite as a promising adsorbent was prepared and used. The concentration of MB at different time intervals was determined using a UV-Vis spectrophotometer while the concentration of RR198 was determined using a high performance liquid chromatography (HPLC) system. The effect of solution pH, contact time, adsorbent amount, and dye concentration were investigated. Also, both kinetic and isotherm experiments were studied. The optimum pH was 10 and 5.5 for adsorption of MB and RR198, respectively, and the equilibrium status was achieved after 120 min. The adsorption kinetics was controlled by the pseudo-second order kinetic model more than pseudo-first order. The best-fitted isotherms were Freundlich and Langmuir models for MB and RR198, respectively. The higher values of Freundlich adsorption capacity (K_f) for MB in comparison with RR198 refer to MAC affinity to remove cationic dyes more than anionic dyes. Apparently, there was no substantial change in the adsorption efficiency among the 10 adsorption-desorption cycles. Overall, MAC can be considered as an effective and efficient viable adsorbent for cationic and anionic dyes removal from industrial wastewaters.

Experimental data for aluminum removal from aqueous solution by raw and iron-modified granular activated carbon

This dataset deals with the modification of granular activated carbon (GAC) with FeCl₃ under basic conditions (pH ≈ 12) for removal of aluminium (Al) from aqueous solution. The structural properties and operational parameters including Al ion concentration (2.15 and 10.3 mg/L), pH solution (2–10), adsorbent dosage (0.1–5 g/L), and contact time (0–10 h) was investigated for raw and modified GAC. This dataset provides information about Al removal by GAC and modified GAC at conditions including: pH = 8, contact time = 6 h, initial Al concentration = 2.15 mg/L. The characterization data of the adsorbents was analysed by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and Brunauer, Emmett and Teller (BET) test. The data showed that Freundlich isotherm with and Pseudo second order kinetic model were the best models for describing the Al adsorption reactions. The acquired data indicated that the maximum adsorption capacity of GAC and modified GAC to uptake Al (C₀ = 10.3 mg/L) was 3 and 4.37 mg/g respectively.