Characterization of a cyclosporine solid dispersion for inhalation

Inulin: Unveiling its potential as a multifaceted biopolymer in prebiotics, drug delivery, and therapeutics

In recent years, inulin has gained much attention as a promising multifunctional natural biopolymer with numerous applications in drug delivery, prebiotics, and therapeutics. It reveals a multifaceted biopolymer with transformative implications by elucidating the intricate interplay between inulin and the host, microbiome, and therapeutic agents. Their flexible structure, exceptional targetability, biocompatibility, inherent ability to control release behavior, tunable degradation kinetics, and protective ability make them outstanding carriers in healthcare and biomedicine. USFDA has approved Inulin as a nutritional dietary supplement for infants. The possible applications of inulin in biomedicine research inspired by nature are presented. The therapeutic potential of inulin goes beyond its role in prebiotics and drug delivery. Recently, significant research efforts have been made towards inulin's anti-inflammatory, antioxidant, and immunomodulatory properties for their potential applications in treating various chronic diseases. Moreover, its ability to reduce inflammation and modulate immune responses opens new avenues for treating conditions such as autoimmune disorders and gastrointestinal ailments. This review will attempt to illustrate the inulin's numerous and interconnected roles, shedding light on its critical contributions to the advancement of healthcare and biomedicine and its recent advancement in therapeutics, and conclude by taking valuable insights into the prospects and opportunities of inulin.

Solid state of inhalable high dose powders

High dose inhaled powders have received increased attention for treating lung infections. These powders can be prepared using techniques such as spray drying, spray-freeze drying, crystallization, and milling. The selected preparation technique is known to influence the solid state of the powders, which in turn can potentially modulate aerosolization and aerosolization stability. This review focuses on how and to what extent the change in solid state of high dose powders can influence aerosolization. It also discusses the commonly used solid state characterization techniques and the application of potential strategies to improve the physical and chemical stability of the amorphous powders for high dose delivery.

Design and Characterization of Atorvastatin Dry Powder Formulation as a potential Lung Cancer Treatment

Lung cancer is the leading cause of cancer death. Many studies have shown the beneficial effects of Atorvastatin in decreasing the mortality risk and improving survival among patients with lung cancer. This research paper focuses on improving AVT cytotoxic activity and cellular uptake by developing mannitol microcarriers as a promising drug delivery system for lung cancer treatment and, studying the impact of improving inhalation deposition on the delivery and Dry Powder formulations efficiency. The AVT loaded mannitol (AM) microparticles (AVT-AM) formulation was prepared by spray drying and characterized for its physicochemical properties and aerodynamic deposition. The results revealed that the AVT-AM formulation has good flow properties and aerosol deposition with a particle size of 3418 nm ± 26.86. The formulation was also assessed in vitro for cytotoxicity effects (proliferation, apoptosis, and cell cycle progression) on A549 human lung adenocarcinoma. Compared with free AVT, the AVT-AM formulation has significantly higher cellular uptake and anti-cancer properties by disrupting cell cycle progression via either apoptosis or cell cycle arrest in the G2/M phase. This study shows that AVT loaded mannitol microcarriers may provide a potentially effective and sustained pulmonary drug delivery for lung cancer treatment.

Spray Freeze-Drying for inhalation application: Process and Formulation Variables

High porous particles with specific aerodynamic properties were processed by the spray freeze-drying (SFD) method. Comprehensive knowledge about all aspects of the SFD method is required for particle engineering of various pharmaceutical products with good flow properties. In this review, different types of the SFD method, the most frequently employed excipients, properties of particles prepared by this method, and most recent approaches concerning SFD are summarized. Generally, this technique can prepare spherical-shaped particles with a highly porous interior structure, responsible for the very low density of powders. Increasing the solubility of spray freeze-dried formulations achieves the desired efficacy. Also, due to the high efficiency of SFD, by determining the different features of this method and optimizing the process by model-based studies, desirable results for various inhaled products can be achieved and significant progress can be made in the field of pulmonary drug delivery.

Inulin and Its Application in Drug Delivery

Inulin’s unique and flexible structure, stabilization/protective effects, and organ targeting ability make it an excellent drug delivery carrier compared to other biodegradable polysaccharides. The three hydroxyl groups attached to each fructose unit serve as an anchor for chemical modification. This, in turn, helps in increasing bioavailability, improving cellular uptake, and achieving targeted, sustained, and controlled release of drugs and biomolecules. This review focuses on the various types of inulin drug delivery systems such as hydrogel, conjugates, nanoparticles, microparticles, micelles, liposomes, complexes, prodrugs, and solid dispersion. The preparation and applications of the different inulin drug delivery systems are further discussed. This work highlights the fact that modification of inulin allows the use of this polymer as multifunctional scaffolds for different drug delivery systems.

Pulmonary Drug Delivery of Antimicrobials and Anticancer Drugs Using Solid Dispersions

It is well established that currently available inhaled drug formulations are associated with extremely low lung deposition. Currently available technologies alleviate this low deposition problem via mixing the drug with inert larger particles, such as lactose monohydrate. Those inert particles are retained in the inhalation device or impacted in the throat and swallowed, allowing the smaller drug particles to continue their journey towards the lungs. While this seems like a practical approach, in some formulations, the ratio between the carrier to drug particles can be as much as 30 to 1. This limitation becomes more critical when treating lung conditions that inherently require large doses of the drug, such as antibiotics and antivirals that treat lung infections and anticancer drugs. The focus of this review article is to review the recent advancements in carrier free technologies that are based on coamorphous solid dispersions and cocrystals that can improve flow properties, and help with delivering larger doses of the drug to the lungs.

[Design and Biopharmaceutical Evaluations of Peptide-loaded Inhalable Formulation to Control Pharmacokinetic Behavior]

Recently, biologics including peptides, proteins, antibodies, and nucleic acids have attracted interest as drug candidates for new modalities, since these compounds can act on target molecules that are not be affected by conventional drugs with a small molecular weight to promote greater selectivity, potency, and safety. Generally, to administer biologics, parenteral routes like intravenous and intramuscular injections have been mainly selected due to their poor oral absorbability and stability in the gastrointestinal tract, which can adversely affect patient compliance. Depending on the target diseases, inhalable formulations can be used to achieve both topical effects in the respiratory tracts and systemic actions due to the characteristics of the pulmonary site, including a large surface area, abundant capillary network, thin membrane with adequate permeability for macromolecules, reduced enzymatic degradation, and a lack of first-pass metabolism. In this study, to achieve desirable delivery of peptide drugs with an inhalable formulation to target sites in the respiratory tract and/or absorption sites in the lung, peptide-loaded inhalable formulations were designed by the application of flash nanoprecipitation, one of the precipitation methods to prepare functional nanoparticles, and the fine droplet drying process, a powderization technique using printing technology, to control the pharmacokinetic behavior. From the findings of the study, the strategic applications of these techniques could contribute to provide peptide-loaded inhalable formulations to enhance their biopharmaceutical potentials.

Amorphous solid dispersion dry powder for pulmonary drug delivery: Advantages and challenges

Amorphous solid dispersion (ASD) is commonly used in pharmaceutical industry. It has been mainly employed to enhance the oral bioavailability of poorly water-soluble drugs that belong to class II and IV of the biopharmaceutical classification system but has showed promise in other areas of pharmaceutical research. In this review, the potential and limitations of ASD dry powder for inhalation are discussed. ASD powder for inhalation (ASD-IP) is commonly prepared by spray drying technique. The physicochemical characteristics of ASD-IP could be tailored to achieve effective lung deposition. ASD-IP could also attain rapid dissolution behavior to achieve therapeutically effective concentration either locally or systemically before particle clearance in the lung. The key challenges of using ASD powder for inhalation include the possible chemical and/or physical instability of the amorphous phase during manufacturing and in vivo, and the moisture and temperature sensitivity of ASD-IP that affects its storage stability.

Proniosomal Microcarriers: Impact of Constituents on the Physicochemical Properties of Proniosomes as a New Approach to Enhance Inhalation Efficiency of Dry Powder Inhalers

Proniosomes are free-flowing systems with coating carriers, which developed as a method for improving the drug flow and pulmonary delivery. Extensive research on proniosomes was done to enhance the dry powder inhalers (DPI)'s inhalation performance. This research aimed at studying the impact of lactose-mannitol mixture additives on the proniosome's physicochemical properties as a method for improving the inhalation efficiency of DPI. Vismodegib has been employed as a compound model. Box-Behnken design has been employed to prepare different proniosomes formulae by incorporating various (A) span 60 concentrations, (B) lactose concentrations and (C) mannitol: total carrier mixture. The measured responses were vesicle size (R₁), %release (R₂), Carr's index (R₃) and %recovery (R₄). The results displayed that R₁ and R₄ were significantly antagonistic to C and significantly synergistic to both A and B while R₂ and R₃ were significantly synergistic to C and significantly antagonistic to both A and B. The optimal formula was selected for its aerodynamic behaviour, cytotoxic activity and bioavailability assessment. The optimal formula resulted in better Vismodegib lung deposition, cytotoxic activity and relative bioavailability. This novel formula could be a promising carrier for sustained delivery of drugs via the pulmonary route.

Enhanced Dissolution and Oral Bioavailability of Cyclosporine A: Microspheres Based on αβ-Cyclodextrins Polymers

Cyclosporine (CsA) has a selective property of suppressing various T-lymphocyte functions. This is of utmost importance in preventing allograft rejection by several organ transplantations, as well as in the treatment of systemic and local autoimmune disorders. However, the poor water solubility of CsA can be a major hurdle for its absorption into the blood stream, which leads to low bioavailability and thus less efficacy. The aim of this study was to prepare, characterize, and evaluate in vitro as well as in vivo, the potential of the innovative CsA drug delivery system. The latter contains CsA in spherical amorphous solid dispersion (SASD) which is embedded in an original α-cyclodextrin and β-cyclodextrin polymer mixture (Poly-αβ-CD) as a multifunctional amorphous carrier. The new developed SASD formulation showed that CsA was molecularly dispersed in αβ-cyclodextrins in an amorphous form, as was confirmed by physicochemical characterization studies. Interestingly, the peptide secondary structure, and thus, the drug activity was not impacted by the preparation of SASD as was shown by circular dichroism. Furthermore, the in vitro CsA release profile kinetics was almost identical to the commercially available product Neoral^®. This study presents the first in vivo proof-of-concept for a novel drug delivery system based on Poly-αβ-CD containing CsA, with SASD allowing for increased bioavailibility. The pharmacokinetic parameters of cyclosporine A from the spherical spray-dried dispersion formulation was demonstrated in a “rat” animal model. For comparison, the commercially available Neoral® was studied. Importantly, the pharmacokinetic parameters were improved by extending T_max from 2 to 3 h after the oral administration in rats, and eventually preventing the enterohepatic circulation. All these results clearly demonstrate the improved pharmacokinetic parameters and enhanced bioavailability of CsA in the new developed drug delivery system. These data demonstrated the superiority of the newly developed Poly-αβ-CD formulation for oral administration of the poorly soluble CsA in vivo without altering its secondary structure. Poly-αβ-CD can be a very useful tool for the oral administration of poorly water-soluble drugs.

A New Hydrate of Cyclosporine: Structural and Physicochemical Characterization

This work highlights a new orthorhombic hydrate (Form 2) of cyclosporine (CsA), a widely used immunosuppressant. The uniqueness of this new form was established by powder X-ray diffractometry, solid-state nuclear magnetic resonance spectroscopy, and single crystal X-ray diffraction analysis. The crystal structure of this form was solved (P2₁2₁2₁, a = 12.639 Å, b = 19.758 Å, c = 29.568 Å, Z = 4). In addition, the solid-state properties of Form 2 were compared with other known crystalline forms of CsA by thermal analysis, water vapor sorption analysis, Fourier-transform infrared spectroscopy, and so on. These studies suggest that Form 2 is a nonstoichiometric hydrate with distinctive hydrogen bonding modes. More importantly, Form 2 is about an order of magnitude less soluble than the commercially available tetragonal form (Form 1). An interconversion map among various CsA solid forms was built by slurry experiments. Form 2 was the most stable form in aqueous systems, whereas the previously known orthorhombic hydrate (Form 3) was the predominant form in nonaqueous vehicles. While Form 2 as a lower solubility form poses greater challenge in bioavailability enhancement, the solid-state properties of this unique hydrate may provide new drug delivery opportunities.

In-situ freeze-drying - forming amorphous solids directly within capsules: An investigation of dissolution enhancement for a poorly soluble drug

Conversion into the amorphous form enhances the dissolution of poorly soluble drugs, however the barrier to market for medicines containing an amorphous drug is poor stability. The aim was to produce the amorphous form of a drug within a capsule, without thermal or mechanical stress during manufacture. To facilitate this aim, the mechanism for drug-polymer interaction was explored. Nifedipine and polyvinylpyrrolidone were dissolved in tert-butanol at different drug/polymer ratios. These solutions were dispensed into gelatin capsules and freeze-dried. Differential scanning calorimetry (DSC) & novel FT-IR analysis based on peak symmetry measurements confirmed the absence of crystallinity when polyvinylpyrrolidone exceeded 50%w/w. Capsules containing 10 mg of nifedipine were amorphous and stable for over 3 months at ≈40 °C. Evidence of hydrogen bonding between the N-H group of nifedipine and the C=O group of PVP was observed and this interaction inhibited nifedipine crystallisation. PVP’s high affinity for water and the nifedipine-polymer interaction lead to a significant dissolution rate enhancement. The freeze-dried capsule, 10%w/w nifedipine/PVP, had the highest dissolution rate constant of 0.37 ± 0.05 min⁻¹, and the lowest time to achieve 50% dissolution or t_1/2 of 1.88 ± 0.05 min. This formulation reached 80% dissolved in less than 6 min whereas the equivalent marketed liquid filled nifedipine capsule took 3 times longer to reach 80% dissolution.

Amorphous solid dispersion of cyclosporine A prepared with fine droplet drying process: Physicochemical and pharmacokinetic characterization

The present study aimed to develop an amorphous solid dispersion (ASD) of cyclosporine A (CsA) by a fine droplet drying (FDD) process for improvement in oral absorption of CsA. CsA and hydroxypropyl cellulose-SSL were dissolved in 1,4-dioxane, and the solution was powdered by the FDD process to obtain the ASD formulation of CsA (ASD/CsA). The ASD/CsA was characterized in terms of morphology, particle size distribution, crystallinity, dissolution behavior, physicochemical stability, and pharmacokinetic behavior in rats. The ASD/CsA was obtained in the form of uniform spherical particles, and the span factor was calculated to be ca. 0.4. CsA in the formulation existed in an amorphous state. The ASD/CsA exhibited a higher dissolution behavior of CsA than amorphous CsA, whereas storage of the ASD/CsA under accelerated conditions led to impairment in the dissolution behavior. The constant release of CsA from non-aged ASD/CsA was observed during dissolution testing. After oral administration of CsA samples (10mg-CsA/kg) in rats, the ASD/CsA showed a high and sustained plasma concentration of CsA as evidenced by a 18-fold increase in the oral bioavailability of CsA compared with amorphous CsA. From these findings, the FDD process might be an efficacious option for the ASD formulation of CsA with enhanced biopharmaceutics properties.

Biopharmaceutical Evaluation of Novel Cyclosporine A Nano-matrix Particles for Inhalation

PURPOSE

This study was undertaken to evaluate the biopharmaceutical properties of cyclosporine A (CsA)-loaded nano-matrix particles for inhalation.

METHODS

Nano-matrix particles of CsA with mannitol (nCsAm) were prepared by a flash nano-precipitation technique employing a multi-inlet vortex mixer and evaluated in terms of physicochemical properties, anti-inflammatory effect in the rat model of airway inflammation, pharmacokinetic behavior, and distributions of CsA to side-effect-related organs after intratracheal administration.

RESULTS

In nCsAm, spherical nano-particles of CsA were covered with mannitol and the mean particle size was 1.3 μm. The in vitro Next Generation Impactor analysis demonstrated fine inhalation performance with a fine particle fraction value of 65.8%. Intratracheal nCsAm (100 μg-CsA/rat) significantly attenuated the recruitment of inflammatory cells into the airway in the rat model of airway inflammation, followed by suppression of the inflammatory biomarkers. After intratracheal nCsAm at a pharmacologically effective dose (100 μg-CsA/rat), there was a 42-47-fold decrease in the distribution of CsA to side-effect-related organs such as the kidney and liver compared with oral CsA at a toxic dose (10 mg-CsA/kg), potentially leading to avoidance of systemic side-effects of CsA.

CONCLUSION

Upon these findings, nCsAm prepared with the flash nano-precipitation technique could be a novel dosage form of CsA for inhalation therapy of airway inflammation with a better safety margin.

Pharmaceutical spray freeze drying

Pharmaceutical spray-freeze drying (SFD) includes a heterogeneous set of technologies with primary applications in apparent solubility enhancement, pulmonary drug delivery, intradermal ballistic administration and delivery of vaccines to the nasal mucosa. The methods comprise of three steps: droplet generation, freezing and sublimation drying, which can be matched to the requirements given by the dosage form and route of administration. The objectives, various methods and physicochemical and pharmacological outcomes have been reviewed with a scope including related fields of science and technology.

Comparison of adjuvants for a spray freeze-dried whole inactivated virus influenza vaccine for pulmonary administration

Stable vaccines administered to the lungs by inhalation could circumvent many of the problems associated with current immunizations against respiratory infections. We earlier provided proof of concept in mice that pulmonary delivered whole inactivated virus (WIV) influenza vaccine formulated as a stable dry powder effectively elicits influenza-specific antibodies in lung and serum. Yet, mucosal IgA, considered particularly important for protection at the site of virus entry, was poorly induced. Here we investigate the suitability of various Toll-like receptor (TLR) ligands and the saponin-derived compound GPI-0100 to serve as adjuvant for influenza vaccine administered to the lungs as dry powder. The TLR ligands palmitoyl-3-cysteine-serine-lysine-4 (Pam3CSK4), monophosphoryl lipid A (MPLA) and CpG oligodeoxynucleotides (CpG ODN) as well as GPI-0100 tolerated the process of spray freeze-drying well. While Pam3CSK4 had no effect on systemic antibody titers, all the other adjuvants significantly increased influenza-specific serum and lung IgG titers. Yet, only GPI-0100 also enhanced mucosal IgA titers. Moreover, only GPI-0100-adjuvanted WIV provided partial protection against heterologous virus challenge. Pulmonary immunization with GPI-0100-adjuvanted vaccine did not induce an overt inflammatory response since influx of neutrophils and production of inflammatory cytokines were moderate and transient and lung histology was normal. Our results indicate that a GPI-0100-adjuvanted dry powder influenza vaccine is a safe and effective alternative to current parenteral vaccines.

Antiviral effects of cyclosporine A in neonatal mice with rotavirus-induced diarrhea

OBJECTIVES

Because rotavirus gastroenteritis is associated with high morbidity and mortality especially in developing countries, it is necessary to develop antirotavirus drugs for the treatment of rotavirus infection. Previous studies have demonstrated that cyclosporin A (CsA) has antiviral properties against rotavirus. Its effect has not yet been evaluated against rotavirus diarrheal disease. The aim of this study was to assess the anti-rotavirus efficacy of CsA in neonatal mice after induction of rotavirus diarrhea.

METHODS

Suckling mice were inoculated with murine rotavirus. On the onset of diarrhea, mice were given different concentrations of CsA. To evaluate the effects of CsA on reduction of rotavirus diarrhea, diarrhea score, fecal virus shedding, and pathological lesion change in the small intestine, messenger RNA (mRNA) expression levels in the small intestine and spleen of mice were measured for type I interferon (IFN-α and IFN-β), inflammation-related cytokines (interleukin [IL]-8, IL-10, IFN-γ, and tumor necrosis factor-α), and inflammatory signaling pathways (p38, c-Jun N-terminal kinase, activator protein-1, and nuclear factor-kappa B).

RESULTS

Among virus-inoculated and CsA-treated groups, a dose of 5 mg · kg⁻¹ · day⁻¹ of CsA inhibited diarrhea and improved fecal virus shedding and intestinal lesion changes. IFN-β mRNA expression was significantly increased in rotavirus-induced diarrhea mice treated with 5 mg · kg⁻¹ · day⁻¹ of CsA, whereas the mRNA expression levels of inflammation-related cytokines (IL-8, IL-10, IFN-γ, and tumor necrosis factor-α) and inflammatory signaling pathways (p38, c-Jun N-terminal kinase, activator protein-1, and nuclear factor-kappa B) were markedly decreased. Antiviral effects of CsA were dose dependent.

CONCLUSIONS

CsA can inhibit rotavirus infection in neonatal mice through its antiviral properties. The mechanism for this may be through CsA suppression of inflammation by viral inhibition in animal models.

Evaluation of monophosphoryl lipid A as adjuvant for pulmonary delivered influenza vaccine

Prophylaxis against influenza could be improved by the development of a stable, easy to deliver, potent mucosal vaccine. In this study, we spray-freeze-dried (SFD) whole inactivated virus influenza vaccine (WIV) alone or supplemented with monophosphoryl lipid A (MPLA) using inulin as a lyoprotectant. Physical characterization revealed that the SFD powder consisted of highly porous particles with a size distribution suitable for pulmonary administration. The receptor-binding properties of WIV and the immunostimulatory properties of MPLA were preserved after spray-freeze-drying as indicated by unchanged hemagglutination titers and a retained ability of the vaccine to activate NFkB after incubation with a reporter cell line, respectively. Pulmonary vaccination of mice with MPLA-adjuvanted liquid or powder WIV resulted in induction of higher mucosal and systemic antibody concentrations than vaccination with non-adjuvanted formulations. When exposed to influenza virus, mice immunized with MPLA-adjuvanted pulmonary vaccine showed similar protection in terms of reduction in lung virus titers and prevention of weight loss as mice immunized intramuscularly with subunit vaccine. Characterization of the antibody response revealed a balanced IgG2a-to-IgG1 profile along with induction of both memory IgA- and IgG-producing B cells in mice immunized with MPLA-adjuvanted vaccine. These studies suggest that the mucosal and systemic immune responses to pulmonary delivered influenza vaccines can be significantly enhanced by using MPLA as adjuvant. MPLA-adjuvanted SFD vaccine was particularly effective implying that delivery of adjuvanted vaccine powder to the lungs can be an attractive way of immunization against influenza.

Physicochemical characterization and aerosol dispersion performance of organic solution advanced spray-dried cyclosporine A multifunctional particles for dry powder inhalation aerosol delivery

In this systematic and comprehensive study, inhalation powders of the polypeptide immunosuppressant drug – cyclosporine A – for lung delivery as dry powder inhalers (DPIs) were successfully designed, developed, and optimized. Several spray drying pump rates were rationally chosen. Comprehensive physicochemical characterization and imaging was carried out using scanning electron microscopy, hot-stage microscopy, differential scanning calorimetry, powder X-ray diffraction, Karl Fischer titration, laser size diffraction, and gravimetric vapor sorption. Aerosol dispersion performance was conducted using a next generation impactor with a Food and Drug Administration-approved DPI device. These DPIs displayed excellent aerosol dispersion performance with high values in emitted dose, respirable fraction, and fine particle fraction. In addition, novel multifunctional inhalation aerosol powder formulations of cyclosporine A with lung surfactant-mimic phospholipids were also successfully designed and developed by advanced organic solution cospray drying in closed mode. The lung surfactantmimic phospholipids were 1,2-dipalmitoyl-sn-glycero-3-phosphocholine and 1,2-dipalmitoyl-snglycero- 3-(phosphor-rac-1-glycerol). These cyclosporine A lung surfactant-mimic aerosol powder formulations were comprehensively characterized. Powder X-ray diffraction and differential scanning calorimetry confirmed that the phospholipid bilayer structure in the solid state was preserved following advanced organic solution spray drying in closed mode. These novel multifunctional inhalation powders were optimized for DPI delivery with excellent aerosol dispersion performance and high aerosol performance parameters.

Constant size, variable density aerosol particles by ultrasonic spray freeze drying

This work provides a new understanding of critical process parameters involved in the production of inhalation aerosol particles by ultrasonic spray freeze drying to enable precise control over particle size and aerodynamic properties. A series of highly porous mannitol, lysozyme, and bovine serum albumin (BSA) particles were produced, varying only the solute concentration in the liquid feed, c(s), from 1 to 5 wt%. The particle sizes of mannitol, BSA, and lysozyme powders were independent of solute concentration, and depend only on the drop size produced by atomization. Both mannitol and lysozyme formulations showed a linear relationship between the computed Fine Particle Fraction (FPF) and the square root of c(s), which is proportional to the particle density, ρ, given a constant particle size d(g). The FPF decreased with increasing c(s) from 57.0% to 16.6% for mannitol and 44.5% to 17.2% for lysozyme. Due to cohesion, the BSA powder FPF measured by cascade impaction was less than 10% and independent of c(s). Ultrasonic spray freeze drying enables separate control over particle size, d(g), and aerodynamic size, d(a) which has allowed us to make the first experimental demonstration of the widely accepted rule d(a)=d(g)(ρ/ρ(o))(1/2) with particles of constant d(g), but variable density, ρ (ρ(o) is unit density).

Formulation and evaluation of a protein-loaded solid dispersions by non-destructive methods

The purpose of this investigation was to develop solid dispersion (SD) formulation of cyclosporine (CyA) using polyethylene glycol (PEG-6000) to enhance its dissolution rate followed by nondestructive method for the prediction of both drug and carrier. SD formulations were prepared by varying the ratio of CyA and PEG-6000 by solvent evaporation technique and characterized by dissolution, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), Fourier transform infrared (FTIR), powder X-ray diffraction (PXRD), near infrared (NIR) and near infrared chemical imaging (NIR-CI). Dissolution data revealed enhanced dissolution of CyA when compared with pure CyA. DSC results showed that the crystallinity of PEG-6000 has decreased as indicated by decrease in the enthalpy of fusion and melting peak in the formulations. FTIR data demonstrated no chemical interaction between drug and carrier. The surface morphology of SD formulations was similar to PEG-6000 particle. NIR-CI disclosed homogeneity of SD matrix as indicated by symmetrical histograms with smaller values of skewness. Similar to NIR, a multivariate peak evaluation with principal component analysis and partial least square (PLS) were carried out with PXRD spectral data. PLS models with both techniques showed good correlation coefficient and smaller value of root mean square of errors. The accuracy of model for predicting CyA and PEG-6000 in NIR and PXRD data were 5.22%, 5.35%, 5.27%, and 2.10%, respectively. In summary, chemometric applications of non-destructive method sensors provided a valuable means of characterization and estimation of drug and carrier in the novel formulations.

Extended release promethazine HCl using acrylic polymers by freeze-drying and spray-drying techniques: formulation considerations

The present study investigated a novel extended release system of promethazine hydrochloride (PHC) with acrylic polymers Eudragit RL100 and Eudragit S100 in different weight ratios (1:1 and 1: 5), and in combination (0.5+1.5), using freeze-drying and spray-drying techniques. Solid dispersions were characterized by Fourier-transformed infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), Powder X-ray diffractometry (PXRD), Nuclear magnetic resonance (NMR), Scanning electron microscopy (SEM), as well as solubility and in vitro dissolution studies in 0.1 N HCl (pH 1.2), double-distilled water and phosphate buffer (pH 7.4). Adsorption tests from drug solution to solid polymers were also performed. A selected solid dispersion system was developed into capsule dosage form and evaluated for in vitro dissolution studies. The progressive disappearance of drug peaks in thermotropic profiles of spray-dried dispersions were related to increasing amount of polymers, while SEM studies suggested homogenous dispersion of drug in polymer. Eudragit RL100 had a greater adsorptive capacity than Eudragit S100, and thus its combination in (0.5+1.5) for S100 and RL 100 exhibited a higher dissolution rate with 97.14% drug release for twelve hours. Among different formulations, capsules prepared by combination of acrylic polymers using spray-drying (1:0.5 + 1.5) displayed extended release of drug for twelve hours with 96.87% release followed by zero order kinetics (r²= 0.9986).

Development of budesonide microparticles using spray-drying technology for pulmonary administration: design, characterization, in vitro evaluation, and in vivo efficacy study

The purpose of this research was to generate, characterize, and investigate the in vivo efficacy of budesonide (BUD) microparticles prepared by spray-drying technology with a potential application as carriers for pulmonary administration with sustained-release profile and improved respirable fraction. Microspheres and porous particles of chitosan (drug/chitosan, 1:2) were prepared by spray drying using optimized process parameters and were characterized for different physicochemical parameters. Mass median aerodynamic diameter and geometric standard deviation for conventional, microspheres, and porous particles formulations were 2.75, 4.60, and 4.30 microm and 2.56, 1.75, and 2.54, respectively. Pharmacokinetic study was performed in rats by intratracheal administration of either placebo or developed dry powder inhalation (DPI) formulation. Pharmacokinetic parameters were calculated (Ka, Ke, T(max), C(max), AUC, and Vd) and these results indicated that developed formulations extended half life compared to conventional formulation with onefold to fourfold improved local and systemic bioavailability. Estimates of relative bioavailability suggested that developed formulations have excellent lung deposition characteristics with extended T(1/2) from 9.4 to 14 h compared to conventional formulation. Anti-inflammatory activity of BUD and developed formulations was compared and found to be similar. Cytotoxicity was determined in A549 alveolar epithelial cell line and found to be not toxic. In vivo pulmonary deposition of developed conventional formulation was studied using gamma scintigraphy and results indicated potential in vitro-in vivo correlation in performance of conventional BUD DPI formulation. From the DPI formulation prepared with porous particles, the concentration of BUD increased fourfold in the lungs, indicating pulmonary targeting potential of developed formulations.

Aerosol drug delivery in lung transplant recipients

BACKGROUND

Inhaled drug delivery after lung transplantation provides a unique opportunity for direct treatment of a solid organ transplant. At present, no inhaled therapies are approved for this population though several have received some development. Primary potential applications include inhaled immunosuppressive and anti-infective drugs.

OBJECTIVES

The objective of this article is to review potential applications of inhaled medications for lung transplant recipients, the techniques used to develop inhaled drugs and the challenges of aerosol delivery in this specific population.

METHODS

The results of relevant studies are reviewed and two developmental examples are presented.

RESULTS/CONCLUSIONS

Inhaled medications may provide significant advantages for lung transplant recipients. Past studies with inhaled cyclosporine and amphotericin-B provide useful guidance for clinical development of new preparations.

Cyclosporin A inhibits CD11a/CD18 adhesion molecules due to inhibition of TNFalpha and IL-1 beta levels in the mouse model of pleurisy induced by carrageenan

The mouse model of pleurisy induced by carrageenan is characterized by a significant enhancement of cell migration due to neutrophils 4 h after pleurisy induction. Forty-eight hours after pleurisy induction, a significant increase in cell migration due to mononuclear cells occurs. Recently, studies in our laboratory have demonstrated that cyclosporine A (CsA) inhibits leukocyte migration in the pleural cavity and lungs in the mouse model of pleurisy induced by carrageenan. In the present work we evaluated whether CsA was able to downregulate CD11a/CD18 adhesion molecule in the lungs, as well as TNFalpha and IL-1 beta levels in the fluid leakage of the pleural cavity in this model. Our results showed that CsA significantly decreased CD11a/CD18 in the lungs, as well as TNFalpha and IL-1 beta levels in the fluid leakage of the pleural cavity 4 h and 48 h after pleurisy induction. It is our hypothesis that the inhibitory effect elicited by CsA upon these adhesion molecules may be also be attributed to the downregulation of TNFalpha and IL-1 beta cytokines.