Current methods for predicting human food effect

The Pharmacokinetics and Bioequivalence of Desvenlafaxine Succinate in Chinese Healthy Subjects Under Fasting and Fed States

Desvenlafaxine succinate is a selective serotonin-norepinephrine reuptake inhibitor for the treatment of major depressive disorder. The pharmacokinetic profile of desvenlafaxine succinate at the clinically recommended dose of 50 mg in Chinese healthy subjects has been reported rarely. The objective of this study was to evaluate the pharmacokinetics and bioequivalence of desvenlafaxine succinate in Chinese healthy subjects. A single-dose, open-label, randomized, two-way crossover study with a 7-day washout period was conducted. A total of 88 individuals were incorporated to show bioequivalence of a generic and a reference drug, with 48 individuals in the fasting state and 40 receiving a high-fat diet. Finally, 46 and 38 individuals completed the fasting and the fed study, respectively. The 90% confidence intervals of the adjusted geometric mean ratios for maximum plasma concentration, area under the concentration-time curve from time zero to the last measurable concentration, and area under the concentration-time curve from time zero to infinity all fell in the bioequivalent interval of 80%-125% in both the fasting and fed states. A total of 33 adverse events were reported, and all were mild or moderate in severity. In summary, the generic and reference formulations were bioequivalent, with no observable safety differences in the fasting/fed state.

Strategies for Managing Solid Form Transformation Risk in Drug Product

The International Conference of Harmonization (ICH) Q6A document provides guidance on setting specifications for new drug substances and drug products.¹ In this paper we focus on decision trees 4 (#1) to (#3) in the guidance related to solid-state form transformation. Form transformation could occur from use of high energy forms to overcome solubility challenges or stresses from manufacturing processes. The decision trees provide guidance on when and how polymorphic form changes should be monitored and controlled. However, guidance is high level and does not capture aspects related to assessments needed to understand if there is a risk of transformation or tools that can be integrated to understand the severity of bioavailability impact at different stages of development. The objective of this paper is therefore to provide comprehensive chemistry manufacturing and controls (CMC) and regulatory strategies to manage the risk of form transformation. This includes practical workflows for form transformation risk assessment, analytical tools to detect and quantify the transformation including their shortcomings, biopharmaceutical tools to understand the severity of transformation risk and if needed justify the limits based on clinical relevance. Finally, a few case studies are discussed that capture how the workflow can be used to manage transformation risk.

Food Interactions Observed in a Pharmacokinetic Investigation Comparing Two Marketed Cold Preparations (BNO1016 and ELOM-080) after Administration to Beagle Dogs - A Pilot Study

Sinupret extract (BNO 1016) and Gelomyrtol forte (ELOM-080) represent the two top-selling cold remedies in Germany nowadays. Whereas BNO 1016 is a typical immediate release coated tablet, ELOM-080 is an enteric-coated soft gelatin capsule. The latter formulation, however, is at risk of pharmacokinetic interactions affecting absorption, especially in cases of concomitant food intake. In the present pilot study, we investigated the risk of a possible food effect in three male beagle dogs. Single doses of BNO 1016 and ELOM-80 were administered under fasting and fed conditions. Blood was sampled up to 30 h post-administration and plasma concentrations of the characteristic ingredients of BNO 1016 as well as ELOM-080 analytes were determined. Pharmacokinetic parameters focusing on the rate and extent of absorption were derived. BNO 1016 analytes demonstrated a similar course in both the fasted and fed states. ELOM-080 analytes also showed a similar picture in the fasted state. However, lag times (time from administration to first quantifiable time point in plasma) of up to 2 h post-administration with corresponding time to reach maximum concentration (obtained directly from the measured concentration) values of 3 to 4 h were observed, reflecting a longer gastric residence time. In the fed state, ELOM-080 showed significant pharmacokinetic characteristics, suggesting a clear food effect. A major observation was a double peak phenomenon that could be observed in two of three dogs. Furthermore, lag times of some analytes, up to 3 - 4 h, and corresponding time to reach maximum concentration values, up to 6 - 8 h, occurred. In contrast to BNO 1016, these findings suggest that, as with other enteric-coated formulations, there may also be a significant risk for food effects with ELOM-080 in humans.

Current State and Challenges of Physiologically Based Biopharmaceutics Modeling (PBBM) in Oral Drug Product Development

Physiologically based biopharmaceutics modeling (PBBM) emphasizes the integration of physicochemical properties of drug substance and formulation characteristics with system physiological parameters to predict the absorption and pharmacokinetics (PK) of a drug product. PBBM has been successfully utilized in drug development from discovery to postapproval stages and covers a variety of applications. The use of PBBM facilitates drug development and can reduce the number of preclinical and clinical studies. In this review, we summarized the major applications of PBBM, which are classified into six categories: formulation selection and development, biopredictive dissolution method development, biopharmaceutics risk assessment, clinically relevant specification settings, food effect evaluation and pH-dependent drug-drug-interaction risk assessment. The current state of PBBM applications is illustrated with examples from published studies for each category of application. Despite the variety of PBBM applications, there are still many hurdles limiting the use of PBBM in drug development, that are associated with the complexity of gastrointestinal and human physiology, the knowledge gap between the in vitro and the in vivo behavior of drug products, the limitations of model interfaces, and the lack of agreed model validation criteria, among other issues. The challenges and essential considerations related to the use of PBBM are discussed in a question-based format along with the scientific thinking on future research directions. We hope this review can foster open discussions between the pharmaceutical industry and regulatory agencies and encourage collaborative research to fill the gaps, with the ultimate goal to maximize the applications of PBBM in oral drug product development.

Population pharmacokinetic/pharmacodynamic models of JNJ-64794964, a toll-like receptor 7 agonist, in healthy adult participants

BACKGROUND

JNJ-4964 is a TLR7 agonist, which, via a type I interferon (IFN)-dependent mechanism, may enhance host immunity suppressed by persistent exposure to hepatitis B antigens in chronic hepatitis B.

METHODS

PK and PD data were pooled from 2 studies involving 90 participants (n = 74 JNJ-4964, dose range 0.2-1.8 mg; n = 16 placebo) in a fasted state. Food effects on PK were studied in 24 participants (1.2 or 1.25 mg). A population PK model and PK/PD models were developed to characterize the effect of JNJ-4964 plasma levels on the time course of IFN-α, IFN-γ-inducible protein 10 (IP-10 or CXCL10), IFN-stimulated gene 15 (ISG15), neopterin and lymphocytes following single and weekly dosing in healthy adults. Covariate effects, circadian rhythms and negative feedback were incorporated in the models.

RESULTS

A 3-compartment linear PK model with transit absorption adequately described JNJ-4964 PK. Bioavailability was 44.2% in fed state relative to fasted conditions. Indirect response models with maximum effect (Emax) stimulation on production rate constant (kin) described IFN-α, IP-10, ISG15 and neopterin, while a precursor-dependent indirect response model with inhibitory effect described the transient lymphocyte reduction. Emax, EC50 and γ (steepness) estimates varied according to PD markers, with EC50 displaying substantial between-subject variability. Female and Asian race exhibited lower EC50, suggesting higher responsiveness.

CONCLUSIONS

PK/PD models well characterized the time course of immune system markers in healthy adults. Our results supported sex and race as covariates on JNJ-4964 responsiveness, as well as circadian rhythms and negative feedback as homeostatic mechanisms that are relevant in TLR7-induced type I IFN responses.

Dynamic Changes in Gastrointestinal Fluid Characteristics after Food Ingestion Are Important for Quantitatively Predicting the In Vivo Performance of Oral Solid Dosage Forms in Humans in the Fed State

The aim of this study was to develop a simulation model to predict the in vivo performance of solid oral dosage forms in humans in the fed state. We focused on investigating the effect of dynamic changes in gastrointestinal (GI) fluid characteristics in the fed state on the in vivo performance of solid dosage forms. We used six solid dosage forms containing weak base drugs as model formulations, two with positive food effects in humans, two with negative food effects, and two which are not affected by food ingestion. These model drug formulations were used to perform biorelevant dissolution tests in the stomach and small intestine under both prandial states. The in vitro properties of the drug products obtained from these tests were then coupled with in silico models (fasted or fed) to predict food effects in humans. We successfully incorporated the dynamic changes in GI fluid characteristics and their effects on the in vivo dissolution of drugs into the prediction model for the fed state. This newly designed physiologically based biopharmaceutics modeling approach provided the precise and quantitative prediction of food effects (i.e., changes in C_max and AUC after food ingestion) in humans while considering the dynamic changes in fluid characteristics in the fed state.

Human pharmacokinetics prediction with an in vitro-in vivo correction factor approach and in vitro drug-drug interaction profile of bictegravir, a potent integrase-strand transfer inhibitor component in approved biktarvy® for the treatment of HIV-1 infection

Bictegravir (BIC) is a potent small-molecule integrase strand-transfer inhibitor (INSTI) and a component of Biktarvy^®, a single-tablet combination regimen that is currently approved for the treatment of human immunodeficiency virus type 1 (HIV-1) infection. The in vitro properties, pharmacokinetics (PK), and drug-drug interaction (DDI) profile of BIC were characterised in vitro and in vivo.BIC is a weakly acidic, ionisable, lipophilic, highly plasma protein-bound BCS class 2 molecule, which makes it difficult to predict human PK using standard methods. Its systemic plasma clearance is low, and the volume of distribution is approximately the volume of extracellular water in nonclinical species. BIC metabolism is predominantly mediated by cytochrome P450 enzyme (CYP) 3A and UDP-glucuronosyltransferase 1A1. BIC shows a low potential to perpetrate clinically meaningful DDIs via known drug metabolising enzymes or transporters.The human PK of BIC was predicted using a combination of bioavailability and volume of distribution scaled from nonclinical species and a modified in vitro-in vivo correlation (IVIVC) correction for clearance. Phase 1 studies in healthy subjects largely bore out the prediction and supported the methods used. The approach presented herein could be useful for other drug molecules where standard projections are not sufficiently accurate. .

Pharmacokinetics and Bioequivalence of Single-Oral-Dose Linagliptin: A Randomized, 2-Period Crossover Trial in Chinese Healthy Subjects Under Fasting and Fed Conditions

The bioequivalence of the reference and test linagliptin formulations was assessed in healthy Chinese subjects under fasting and fed conditions. The study was designed as a single-dose, randomized, open-label, 2-period crossover study with a 35-day washout period between 2 administrations. Forty-eight healthy subjects received 5 mg of test and reference linagliptin formulation orally under fasting condition. The geometric mean of the maximum observed linagliptin concentration (C_max ) for the test formulation was 4.9 ng/mL (reference, 5.0 ng/mL), the area under the plasma concentration-time curve from 0 to 72 hours (AUC_0-72 ) was 154.7 ng · h/mL (reference, 157.4 ng · h/mL). Thirty-six subjects received 5 mg of test and reference linagliptin formulation orally under fed conditions. The geometric mean of C_max for the test linagliptin formulation was 2.8 ng/mL (reference, 2.8 ng/mL), AUC_0-72 was 133.5 ng · h/mL (reference, 136.6 ng · h/mL). The 90%CIs for the test/reference ratio for C_max and AUC_0-72 met the bioequivalence criteria (80%-125%). The test and reference formulations of linagliptin were well tolerated and bioequivalent under fasting and fed conditions.

Considerations in the developability of peptides for oral administration when formulated together with transient permeation enhancers

This paper reviews many of the properties of a peptide that need to be considered prior to development as an oral dosage form when co-formulated with a permeation enhancer to improve oral bioavailability, including the importance and implications of peptide half-life on variability in pharmacokinetic profiles. Clinical considerations in terms of food and drug-drug interactions are also discussed. The paper further gives a brief overview how permeation enhancers overcome barriers that limit oral absorption of peptides and thereby improve their oral bioavailability, albeit bioavailabilities are still low single digit and variability is high.

Comparison of a single pharmaceutical surfactant versus intestinal biorelevant media for etravirine dissolution: Role and impact of micelle diffusivity

Etravirine is an antiviral whose oral absorption is limited by low solubility/dissolution. The objective was to predict and compare etravirine's surfactant-mediated dissolution into polyoxyethylene-10 lauryl ether (POE) and FeSSIF-V2, including the contribution of slow micelle diffusivity. Dynamic light scattering (DLS) was used to measure the size and diffusivity values of drug-loaded micelles. In vitro intrinsic dissolution into surfactant media were predicted using a model for surfactant-mediated dissolution. Compared to maleic buffer, POE and FeSSIF-V2 increased etravirine solubility 232-fold and 8.97-fold, respectively. From DLS, micelle diffusivity of drug-loaded POE micelle and FeSSIF-V2 mixed-micelle was 5.15x10^-7 cm²/s and 5.76x10^-8 cm²/s, respectively. Observed and predicted dissolution enhancement into POE were 50.7 and 31.3, and 1.26 and 1.24 into FeSSIF-V2, respectively. Hence, there was high dissolution enhancement into POE, although the observed enhancement was only 21.9% of the observed solubility enhancement, reflecting the attenuating impact of the large and slowly diffusing drug-loaded POE micelles. Meanwhile, there was minimal dissolution enhancement into FeSSIF-V2, and the observed enhancement was only 14.0% of the observed solubility enhancement, reflecting the even slower diffusing drug-loaded FeSSIF-V2 mixed-micelles compared to drug-loaded POE micelles. Results are considered in light of designing a single pharmaceutical surfactant system for dissolution that mimics a FeSSIF-V2 system.

Applications of bio-predictive dissolution tools for the development of solid oral dosage forms: Current industry experience

Development and optimization of orally administered drug products often require bio-predictive tools to help with informing formulation and manufacturing decisions. Reliable bio-predictive dissolution toolkits not only allow rational development of target formulations without having to conduct excessive in vivo studies but also help in detecting critical material attributes (CMAs), critical formulation variables (CFVs), or critical process parameters (CPPs) that could impact a drug's in vivo performance. To provide early insights for scientists on the development of a bio-predictive method for drug product development, this review summarizes current phase-appropriate bio-predictive dissolution approaches applicable to address typical concerns on solubility-limited absorption, food effect, achlorhydria, development of extended-release formulation, clinically relevant specification, and biowaiver. The selection of an in vitro method which can capture the key rate-limiting step(s) of the in vivo dissolution and/or absorption is considered to have a better chance to produce a meaningful in vitro-in vivo correlation (IVIVC) or in vitro-in vivo relationship (IVIVR).

Predicting Bile and Lipid Interaction for Drug Substances

Predicting biopharmaceutical characteristics and food effects for drug substances may substantially leverage rational formulation outcomes. We established a bile and lipid interaction prediction model for new drug substances and further explored the model for the prediction of bile-related food effects. One hundred and forty-one drugs were categorized as bile and/or lipid interacting and noninteracting drugs using ¹H nuclear magnetic resonance (NMR) spectroscopy. Quantitative structure-property relationship modeling with molecular descriptors was applied to predict a drug's interaction with bile and/or lipids. Bile interaction, for example, was indicated by two descriptors characterizing polarity and lipophilicity with a high balanced accuracy of 0.8. Furthermore, the predicted bile interaction correlated with a positive food effect. Reliable prediction of drug substance interaction with lipids required four molecular descriptors with a balanced accuracy of 0.7. These described a drug's shape, lipophilicity, aromaticity, and hydrogen bond acceptor capability. In conclusion, reliable models might be found through drug libraries characterized for bile interaction by NMR. Furthermore, there is potential for predicting bile-related positive food effects.

Bio-enabling strategies to mitigate the pharmaceutical food effect: a mini review

The concomitant administration of oral drugs with food can result in significant changes in bioavailability, leading to variable pharmacokinetics and considerable clinical implications, such as over- or under-dosing. Consequently, there is increasing demand for bio-enabling formulation strategies to reduce variability in exposure between the fasted and fed state and/or mitigate the pharmaceutical food effect. The current review critically evaluates technologies that have been implemented to overcome the positive food effects of pharmaceutical drugs, including, lipid-based formulations, nanosized drug preparations, cyclodextrins, amorphisation and solid dispersions, prodrugs and salts. Additionally, improved insight into preclinical models for predicting the food effect is provided. Despite the wealth of research, this review demonstrates that application of optimal formulation strategies to mitigate the positive food effects and the evaluation in preclinical models is not a universal approach, and improved standardisation of models to predict the food effects would be desirable. Ultimately, the successful reformulation of specific drugs to eliminate the food effect provides a panoply of advantages for patients with regard to clinical efficacy and compliance.

Development of In Vitro Dissolution Testing Methods to Simulate Fed Conditions for Immediate Release Solid Oral Dosage Forms

In vitro dissolution testing is widely used to mimic and predict in vivo performance of oral drug products in the gastrointestinal (GI) tract. This literature review assesses the current in vitro dissolution methodologies being employed to simulate and predict in vivo drug dissolution under fasted and fed conditions, with emphasis on immediate release (IR) solid oral dosage forms. Notable human GI physiological conditions under fasted and fed states have been reviewed and summarized. Literature results showed that dissolution media, mechanical forces, and transit times are key dissolution test parameters for simulating specific postprandial conditions. A number of biorelevant systems, including the fed stomach model (FSM), GastroDuo device, dynamic gastric model (DGM), simulated gastrointestinal tract models (TIM), and the human gastric simulator (HGS), have been developed to mimic the postprandial state of the stomach. While these models have assisted in expanding physiological relevance of in vitro dissolution tests, in general, these models lack the ability to fully replicate physiological conditions/processes. Furthermore, the translatability of in vitro data to an in vivo system remains challenging. Additionally, physiologically based pharmacokinetic (PBPK) modeling has been employed to evaluate the effect of food on drug bioavailability and bioequivalence. Here, we assess the current status of in vitro dissolution methodologies and absorption PBPK modeling approaches to identify knowledge gaps and facilitate further development of in vitro dissolution methods that factor in fasted and fed states. Prediction of in vivo drug performance under fasted and fed conditions via in vitro dissolution testing and modeling may potentially help efforts in harmonizing global regulatory recommendations regarding in vivo fasted and fed bioequivalence studies for solid oral IR products.

Harnessing the potential of nanostructured formulations to mimic the food effect of lurasidone

Lurasidone is an important antipsychotic drug indicated for the treatment of schizophrenia and bipolar disorder, with an oral bioavailability of 9-19% owing to its poor aqueous solubility. Additionally, lurasidone exhibits a 2-fold positive food effect, such that patients must administer their medication with a meal, leading to significant non-compliance. The aim of this research was to evaluate the in vitro and in vivo performance of lurasidone when engineered as nanostructured systems. Specifically, a nanosuspension, nano-emulsion and silica-lipid hybrid (SLH) microparticles were formulated and the influence of composition and nanostructure on the mechanism of solubilisation was compared. Formulations were shown to enhance fasted state solubilisation levels in vitro by up to 5.9-fold, compared to pure drug. Fed- and fasted-state solubilisation profiles revealed that in contrast to the nanosuspension and nano-emulsion, lurasidone SLH mitigated the positive pharmaceutical effect of lurasidone. In vivo pharmacokinetic evaluations revealed that the nanosuspension, nano-emulsion and SLH enhanced the bioavailability of lurasidone by 3-fold, 2.4-fold and 8.8-fold, respectively, compared to pure drug after oral administration. For lurasidone, the combination of lipid-based nanostructure and porous silica nanostructure (SLH) led to optimal fasted state bioavailability which can ultimately result in enhanced treatment efficacy, easier dosing regimens and improved patient outcomes.

Machine learning methods for prediction of food effects on bioavailability: A comparison of support vector machines and artificial neural networks

Despite countless advances in recent decades across various in vitro, in vivo and in silico tools, anticipation of whether a drug will show a human food effect (FE) remains challenging. One means to predict potential FE involves probing any dependence between FE and drug properties. Accordingly, this study explored the potential for two machine learning (ML) algorithms to predict likely FE. Using a collated database of drugs licensed from 2016-2020, drugs were classified into three groups; positive, negative or no FE. Greater than 250 drug properties were predicted for each drug which were used to train predictive models using Support Vector Machine (SVM) and Artificial Neural Network (ANN) algorithms. When compared, ANN outperformed SVM for FE classification upon training (82%, 72%) and testing (72%, 69%). Both models demonstrated higher FE prediction accuracy than the Biopharmaceutics Classification System (BCS) (46%). This exploratory work provided new insights into the connection between FE and drug properties as the Octanol Water Partition Coefficient (S+logP), Number of Hydrogen Bond Donors (HBD), Topological Polar Surface Area (T_PSA) and Dose (mg) were all significant for prediction. Overall, this study demonstrated the utility of ML to facilitate early anticipation of likely FE in pre-clinical development using four well-known drug properties.

Single-Dose Pharmacokinetics and Tolerability of the Oral Epidermal Growth Factor Receptor Inhibitor Mobocertinib (TAK-788) in Healthy Volunteers: Low-Fat Meal Effect and Relative Bioavailability of 2 Capsule Products

Mobocertinib (TAK‐788) is a tyrosine kinase inhibitor under investigation for treatment of non–small cell lung cancer with activating EGFR exon 20 insertions. This study examined the safety; tolerability; pharmacokinetics (PK), including food effects; and bioavailability of mobocertinib in healthy volunteers. In part 1, fasted volunteers were randomized to placebo or mobocertinib in single‐ascending‐dose cohorts (20‐160 mg). In part 2, mobocertinib (120/160 mg) was administered on day 1 of periods 1 and 2 under fasted or low‐fat meal conditions (2‐period, 2‐sequence crossover design). In part 3, fasted volunteers received mobocertinib 160 mg in 1 of 2 capsule products on day 1 of periods 1 and 2 with 7‐day washout. Safety and PK parameters were assessed. Sixty‐nine volunteers were enrolled (mean age, 29 years; 75% male). The most common adverse events (AEs; ≥10% of volunteers) were gastrointestinal AEs (25%‐50%) and headache (8%‐31%). No serious AEs were reported. A low‐fat meal did not affect the PK of mobocertinib or its active metabolites. The geometric mean terminal disposition phase half‐life (20 hours) supported once‐daily dosing. The 2 capsule products were bioequivalent. These data guided dosing and supported administration of mobocertinib without regard to low‐fat meal intake in ongoing and planned clinical studies.

Assessing Food Effects on Oral Drug Absorption Based on the Degree of Renal Excretion

Food intake influences the pharmacokinetics of orally administered drugs by altering drug absorption, metabolism, and excretion. A drug which is mainly excreted into urine as parent drug is usually highly water-soluble and metabolically stable. Food intake is not expected to significantly affect its extent of oral absorption, metabolism, and excretion. Therefore, we hypothesize that an orally administered drug with significant renal excretion should not have a dramatic food effect (FE). To test our hypothesis, we summarized the FE for orally administered immediate-release (IR) and modified-release (MR) formulations approved by the US FDA from 1998 to 2019, focusing on drugs undergoing significant renal excretion. Totally, 98 active pharmaceutical ingredients (APIs) in IR formulations and 34 APIs in MR formulations were selected. The results demonstrate that the area-under-the-curve (AUC) for IR drug products with f_{ur_unchanged_po} > 10% is unlikely to be affected by food, although the peak plasma concentration (C_max) may increase or decrease by up to 50%. Compared with IR drug products with f_{ur_unchanged_po} > 10%, MR drug products with f_{ur_unchanged_po} > 10% tend to have more significant FE. Although our proposed approach cannot substitute a clinical FE study, it could be a useful addition to early drug development to get an initial sense of the potential for FE for a drug candidate.

Prediction of in vivo supersaturation and precipitation of poorly water-soluble drugs: Achievements and aspirations

This review focuses on options available to a pharmaceutical scientist to predict in vivo supersaturation and precipitation of poorly water-soluble drugs. As no single device or system can simulate the complex gastrointestinal environment, a combination of appropriate in vitro tools may be utilized to get optimal predictive information. To address the empirical issues encountered during small-scale and full-scale in vitro predictive testing, theoretical background and relevant case studies are discussed. The practical considerations for selection of appropriate tools at various stages of drug development are recommended. Upcoming technologies that have potential to further reduce in vivo studies and expedite the drug development process are also discussed.

Food (Matrix) Effects on Bioaccessibility and Intestinal Permeability of Major Olive Antioxidants

BACKGROUND

olive pomace extract (OPE) is a rich source of health promoting polyphenols (hydroxytyrosol (HTS) and tyrosol (TS)) and can be used as a nutraceutical ingredient of dietary supplements and functional foods. Its adequate bioavailability is a prerequisite for excreting biological activity and can be significantly and specifically affected by different food matrices.

METHODS

in order to investigate food effects on polyphenol bioaccessibility, OPE was co-digested with different foods according to internationally harmonized in vitro digestibility method. Impact of particular nutrients on HTS and TS permeability was assessed on Caco-2 cell monolayer.

RESULTS

HTS and TS bioaccessibility and transepithelial permeability can be significantly affected by foods (nutrients), especially by casein and certain types of dietary fiber. Those effects are polyphenol-and nutrient-specific and are achieved either through complexation in gastrointestinal lumen and/or through direct effects of nutrients on intestinal monolayer.

CONCLUSIONS

obtained results emphasize the significance and complexity of polyphenol interactions within the food matrix and the necessity of individual investigational approaches with respect to particular food/nutrient and interacting phenolic compounds.

Biliary Excretion-Mediated Food Effects and Prediction

Many orally administered drugs with negative food effects (i.e., lower exposure under fed conditions) are often primarily or partially eliminated by biliary excretion. The aim of this study is to assess the potential correlation between a negative food effect and biliary excretion. Correlation analysis was conducted using a training dataset containing 27 drugs which met the following criteria: (1) immediate-release formulations, (2) shows a negative food effect, (3) > 10% biliary clearance, and (4) does not undergo extensive metabolism. A correlation between fed-state biliary clearance (CL_b,fed) and fasted-state biliary clearance (CL_b,fast) (y = 1.81*x, R² = 0.68) was observed. The 1.8-fold increase in biliary clearance was then used as a correction factor to improve physiologically based pharmacokinetic (PBPK) prediction of food effects for 12 test drugs. The mean deviations of predicted fed/fasting AUC ratio and C_max ratio from clinically observed values were reduced from 32.4 to 17.2% and from 63.3 to 54.3%, respectively. In contrast to the positive food effects on most biopharmaceutics classification system (BCS) class II drugs for which food-stimulated bile flow increases drug solubility and absorption, our results suggest that the elimination of biliary excreted drugs is increased by food-stimulated bile flow, resulting in negative food effects.

Food Effects on Oral Drug Absorption: Application of Physiologically-Based Pharmacokinetic Modeling as a Predictive Tool

The bioavailability of an orally administered small molecule is often dictated by drug-specific physicochemical characteristics and is influenced by many biological processes. For example, in fed or fasted conditions, the transit time within the gastrointestinal tract can vary, confounding the ability to predict the oral absorption. As such, the effects of food on the pharmacokinetics of compounds in the various biopharmaceutics classification system (BCS) classes need to be assessed. The consumption of food leads to physiological changes, including fluctuations in the gastric and intestinal pH, a delay in gastric emptying, an increased bile secretion, and an increased splanchnic and hepatic blood flow. Despite the significant impact of a drug's absorption and dissolution, food effects have not been fully studied and are often overlooked. Physiologically-based pharmacokinetic (PBPK) models can be used to mechanistically simulate a compound's pharmacokinetics under fed or fasted conditions, while integrating drug properties such as solubility and permeability. This review discusses the PBPK models published in the literature predicting the food effects, the models' strengths and shortcomings, as well as future steps to mitigate the current knowledge gap. We observed gaps in knowledge which limits the ability of PBPK models to predict the negative food effects and food effects in the pediatric population. Overall, the further development of PBPK models to predict food effects will provide a mechanistic basis to understand a drug's behavior in fed and fasted conditions, and will help enable the drug development process.

The Bioequivalence of Two Peficitinib Formulations, and the Effect of Food on the Pharmacokinetics of Peficitinib: Two-Way Crossover Studies of a Single Dose of 150 mg Peficitinib in Healthy Volunteers

The marketed tablet formulation of peficitinib differs from the tablet used during the clinical trials. The bioequivalence of the marketed formulation and developmental tablet, and the food effect on the marketed formulation, were analyzed in 2 Japanese open‐label, randomized, 2‐way crossover studies in healthy male volunteers. Volunteers received a single oral dose of the marketed 150‐mg peficitinib tablet under fasted conditions (bioequivalence), and under fed or fasted conditions (food effect). Bioequivalence was compared with the developmental 150‐mg tablet. Samples for pharmacokinetic analysis were collected before dose and ≤72 hours after dose. Safety assessments included adverse events, vital signs, and laboratory variables. In total, 40 and 18 subjects were randomized to the bioequivalence and food effect studies, respectively. The 2 peficitinib formulations were bioequivalent (90% confidence intervals of the geometric mean ratios for C_max and AUC_t of peficitinib were within predefined limits of 0.8 to 1.25). The AUC_last and the C_max of the marketed tablet were 36.8% and 56.4% higher, respectively, under fed versus fasted conditions. Peficitinib was well tolerated. The marketed 150‐mg tablet formulation of peficitinib was bioequivalent to the developmental 150‐mg formulation, with no discernible safety differences. Bioavailability increased under fed conditions with the marketed tablet formulation.

Valorization of Chicken Feet By-Product of the Poultry Industry: High Qualities of Gelatin and Biofilm from Extraction of Collagen

In this research, products with high quality were obtained from natural sources. The sensorial qualities, chemical characterization, and physical properties of gelatin extracted from chicken feet were compared with commercial gelatins. The extraction process was performed using acetic acid on a concentration ranging from 0.318% to 3.682%, processing time between 1.0 h and 8.4 h and extraction temperature between 43.3 °C and 76.8 °C. After the end of each assay, the yield was measured. Results showed that, under the best conditions, the collagen extraction yield was above 8%, and comprised 78.525 g/100 g of protein. Collagen analyzed by ICP-MS was composed of 99.44% of macro-minerals that are of great importance to human health. ATR-FTIR analysis showed that approximately 70.90% of the total protein from chicken feet is collagen, whereas, in commercial gelatin, only 30.31% is collagen. When comparing chicken gelatin with commercial gelatin, most sensory attributes were similar and chicken gelatin gained acceptance by more than 80% of the consumers. Additionally, the collagen films obtained from chicken feet and swine showed water absorption, odors, and texture characteristics similar to commercial material, such as latex and celofane. Consequently, due to its similarity to human skin, it is possible to apply it as a biocurative.

Evaluating the Role of Solubility in Oral Absorption of Poorly Water-Soluble Drugs Using Physiologically-Based Pharmacokinetic Modeling

Poor aqueous solubility and dissolution of drug candidates drive key decisions on lead series optimization during drug discovery, on formulation optimization, and clinical studies planning during drug development. The interpretation of the in vivo relevance of early pharmaceutical profiling is often confounded by the multiple factors affecting oral systemic exposure. There is growing evidence that in vitro drug solubility may underestimate the true in vivo solubility and lead to drug misclassification. Based on 10 poorly water‐soluble tyrosine kinase inhibitors, this paper demonstrates the use of physiologically‐based pharmacokinetic (PK) analysis in combination with early clinical PK data to identify drugs whose absorption is truly limited by solubility in vivo and, therefore, expected to exhibit food effect. Our study supports a totality of evidence approach using early clinical data to guide decisions on conducting drug interaction studies with food and acid‐reducing agents.

Toward the establishment of a standardized pre-clinical porcine model to predict food effects - Case studies on fenofibrate and paracetamol

A preclinical porcine model that reliably predicts human food effect of fenofibrate was developed. Fenofibrate was administered to pigs as model compound with a positive food effect. Two different types of fed conditions were explored: a FDA style breakfast and a standard pig pellet feed. In order to assess if complete stomach emptying had been achieved under the employed fasting protocol, the amount of gastric and intestinal content was evaluated post-mortem. In addition, the protocol was designed to evaluate gastric emptying in the pre- and postprandial state using paracetamol as a marker. The study confirmed that micronized fenofibrate displayed a positive food effect with a similar fold difference to humans in FDA style fed state. Post-mortem assessment of stomach and intestinal content confirmed significantly lower content in the fasted compared to the pig pellet fed state. In the case of paracetamol, a delayed gastric emptying in the fed state was not observed, which may suggest that the Magenstrasse phenomena reported in humans, may also occur in landrace pigs. The study demonstrated the utility of a food effect protocol in landrace pigs as a pre-clinical approach to predict human food effects and provided new insights into gastric emptying in pigs.

Parameters that determine dissolution and efficacy of itraconazole and its relevance to recalcitrant dermatophytoses

INTRODUCTION

Recalcitrant dermatophytoses is on the rise. Though myriad factors contribute to recalcitrance including terbinafine resistance, itraconazole largely remains sensitive. However, there are increasing instances of patients not responding adequately to itraconazole despite low MICs, probably due to issues plaguing the pelletization process, resulting in suboptimal quality. Data on this topic was searched on pubmed using the search items: itraconazole, MIC, MFC, quality, assay, pharmacokinetics, pharmacodynamics, dermatophytoses, and recalcitrance. Areas covered: A detailed analysis of the manufacturing process of itraconazole with emphasis on pelletization and parameters affecting the dissolution and bioavailability is presented. Important formulation factors including drug-polymer ratio, polymer type, coating thickness, bead size, and number are discussed. Also covered is the rationale of dosimetry of itraconazole in dermatophytoses based on the skin pharmacokinetics and MIC of the organism. Expert opinion: The process of pelletization has multiple components aiming to achieve maximum dissolution of the drug. Variations in the process, pellet quality, number, and polymer determine absorption. Morphometric analysis of pellets is a simple method to quantify quality of the drug. Once the process has been standardized, dosimetry depends on the route of secretion and site of infection, accounting for the variation of doses from 100 mg to 400 mg/day.

The mechanisms of pharmacokinetic food-drug interactions - A perspective from the UNGAP group

The simultaneous intake of food and drugs can have a strong impact on drug release, absorption, distribution, metabolism and/or elimination and consequently, on the efficacy and safety of pharmacotherapy. As such, food-drug interactions are one of the main challenges in oral drug administration. Whereas pharmacokinetic (PK) food-drug interactions can have a variety of causes, pharmacodynamic (PD) food-drug interactions occur due to specific pharmacological interactions between a drug and particular drinks or food. In recent years, extensive efforts were made to elucidate the mechanisms that drive pharmacokinetic food-drug interactions. Their occurrence depends mainly on the properties of the drug substance, the formulation and a multitude of physiological factors. Every intake of food or drink changes the physiological conditions in the human gastrointestinal tract. Therefore, a precise understanding of how different foods and drinks affect the processes of drug absorption, distribution, metabolism and/or elimination as well as formulation performance is important in order to be able to predict and avoid such interactions. Furthermore, it must be considered that beverages such as milk, grapefruit juice and alcohol can also lead to specific food-drug interactions. In this regard, the growing use of food supplements and functional food requires urgent attention in oral pharmacotherapy. Recently, a new consortium in Understanding Gastrointestinal Absorption-related Processes (UNGAP) was established through COST, a funding organisation of the European Union supporting translational research across Europe. In this review of the UNGAP Working group "Food-Drug Interface", the different mechanisms that can lead to pharmacokinetic food-drug interactions are discussed and summarised from different expert perspectives.

New Insights into Using Lipid Based Suspensions for 'Brick Dust' Molecules: Case Study of Nilotinib

PURPOSE

Lipid suspensions have been shown to be a suitable bio-enabling formulation approach for highly lipophilic or 'grease ball' drug molecules, but studies on 'brick dust' drugs are lacking. This study explored the utility of lipid suspensions for enhancing oral bioavailability of the rather hydrophobic drug nilotinib in vivo in rats.

METHODS

Four lipid suspensions were developed containing long chain triglycerides, medium chain triglyceride, long chain monoglycerides and medium chain monoglycerides and in vivo bioavailability was compared to an aqueous suspension. Additionally, in vitro lipolysis and wettability tests were conducted.

RESULTS

Nilotinib lipid suspensions did not show a bioavailability increase compared to an aqueous suspension. The bioavailability was lower for triglyceride suspensions, relative to both monoglyceride and an aqueous suspension. The long chain monoglyceride displayed a significantly higher bioavailability relative to triglycerides. In vitro lipolysis results suggested entrapment of nilotinib crystals within poorly dispersible triglycerides, leading to slower nilotinib release and absorption. This was further supported by higher wettability of nilotinib by lipids.

CONCLUSION

Monoglycerides improved oral bioavailability of nilotinib in rats, relative to triglycerides. For 'brick dust' drugs formulated as lipid suspensions, poorly dispersible formulations may delay the release of drug crystals from the formulation leading to reduced absorption. Graphical Abstract An aqueous and four lipid suspensions have been evaluated in in vitro and in vivo to gain insights into the potential benefits and limitations of lipid suspensions.

Nanoparticle modification in biological media: implications for oral nanomedicines

Nanomedicine has shown potential in enabling oral administration of poorly absorbable drugs, such as biologics. As part of the process related to optimisation of the safety and efficacy of nanomedicines, it is imperative that the interaction of nanoparticles with the biological systems – including the gut – is fully characterised. In this article, we provide an overview of the major mechanisms by which nanoparticles may transform upon introduction in biological media. Specifically, the phenomena of association, dissolution and biomolecule adsorption are discussed, together with factors which influence the occurrence of each phenomenon. The implications of these phenomena within the context of therapeutic action of nanomedicines, which includes reduced targeting efficiency, are also explored. Finally, we will comment on nanoparticle modification within the gut environment, including the currently available gastrointestinal models for the study of nano-bio interactions, with implications in the area of nanomedicines for oral administration.

Nanomedicines undergo transformation in biological media, which impacts biological effects. Such transformation in the gut environment has implications in use of nanomedicines for oral administration.

In vitro antiplasmodial activity, pharmacokinetic profiles and interference in isoprenoid pathway of 2-aniline-3-hydroxy-1.4-naphthoquinone derivatives

Background

Plasmodium falciparum has shown multidrug resistance, leading to the necessity for the development of new drugs with novel targets, such as the synthesis of isoprenic precursors, which are excellent targets because the pathway is different in several steps when compared with the human host. Naphthoquinone derivatives have been described as potentially promising for the development of anti-malarial leader molecules. In view of that, the focus in this work is twofold: first, evaluate the in vitro naphthoquinone antiplasmodial activity and cytotoxicity; secondly, investigate one possible action mechanism of two derivatives of hydroxy-naphthoquinones.

Results

The two hydroxy-naphthoquinones derivatives have been tested against P. falciparum in vitro, using strains of parasites chloroquine-sensitive (3D7) and chloroquine-resistant (Dd2), causing 50% inhibition of parasite growth with concentrations that varied from 7 to 44.5 μM. The cell viability in vitro against RAW Cell Line displayed IC₅₀ = 483.5 and 714.9 μM, whereas, in primary culture tests using murine macrophages, IC₅₀ were 315.8 and 532.6 μM for the two selected compounds, causing no haemolysis at the doses tested. The in vivo acute toxicity assays exhibited a significant safety margin indicated by a lack of systemic and behavioural toxicity up to 300 mg/kg. It is suggested that this drug seems to inhibit the biosynthesis of isoprenic compounds, particularly the menaquinone and tocopherol.

Conclusions

These derivatives have a high potential for the development of new anti-malarial drugs since they showed low toxicity associated to a satisfactory antiplasmodial activity and possible inhibition of a metabolic pathway distinct from the pathways found in the mammalian host.

Food for thought: formulating away the food effect - a PEARRL review

OBJECTIVES

Co-ingestion of oral dosage forms with meals can cause substantial changes in bioavailability relative to the fasted state. Food-mediated effects on bioavailability can have significant consequences in drug development, regulatory and clinical settings. To date, the primary focus of research has focused on the ability to mechanistically understand the causes and predict the occurrence of these effects.

KEY FINDINGS

The current review describes the mechanisms underpinning the occurrence of food effects, sheds new insights on the relative frequency for newly licensed medicines and describes the various methods by which they can be overcome. Analysis of oral medicines licensed by either the EMA or FDA since 2010 revealed that over 40% display significant food effects. Due to altered bioavailability, these medicines are often required to be dosed, rather restrictively, in either the fed or the fasted state, which can hinder clinical usefulness.

SUMMARY

There are clinical and commercial advantages to predicting the presence of food effects early in the drug development process, in order to mitigate this risk of variable food effect bioavailability. Formulation approaches aimed at reducing variable food-dependent bioavailability, through the use of bio-enabling formulations, are an essential tool in addressing this challenge and the latest state of the art in this field are summarised here.

Synthesis and Physicochemical Evaluation of Entecavir-Fatty Acid Conjugates in Reducing Food Effect on Intestinal Absorption

The oral bioavailability of entecavir (EV), an anti-viral agent commonly prescribed to treat hepatitis B infections, is drastically reduced under a post-prandial state. This is primarily due to its low permeability in the gastrointestinal tract. To reduce the food effect on the intestinal absorption of the nucleotide analogue, four lipidic prodrugs were synthesized via the esterification of the primary alcohol of EV with fatty acids (hexanoic acid, octanoic acid, decanoic acid, and dodecanoic acid). EV-3-dodecanoate (or EV-C12) exhibited high solubility in a fed state simulated intestinal fluid (78.8 μg/mL), with the acceptable calculated logP value (3.62) and the lowest hydrolysis rate (22.5% for 12 h in simulated gastric fluid, pH 1.2). Therefore, it was chosen as a candidate to improve intestinal absorption of EV, especially under a fed state condition. Physical characterization using scanning electron microscopy, a differential scanning calorimeter, and X-ray powder diffraction revealed that EV-C12 had a rectangular-shaped crystalline form, with a melting point of about 170 °C. In a release test in biorelevant media, such as fasted and fed state-simulated intestinal and/or gastric fluid, more than 90% of the prodrug was released within 2 h in all media tested. These data suggest that this lipidic prodrug might have the potential to alleviate the negative food effect on the intestinal absorption of EV with increased therapeutic efficacy and patient compliance.

Industry Perspective on Standardizing Food-Effect Studies for New Drug Development

Investigating the effect of food on bioavailability during the development of an oral drug product is of prime importance because it has major implications on the study design of the clinical trials and dosing and administration recommendations. For modified-release formulations that exhibit dose dumping when administered with food, this may result in clinical concerns around safety and efficacy. In this article, we provide an overview of the various considerations in our opinion that impact the design and conduct of food-effect studies. We summarize the various recommendations from the different regulatory agencies and provide specific suggestions on study conduct in terms of statistical design, timing of studies, subject selection, and type and caloric content of the meal. We also discuss the role of modeling and simulation. Finally, we present an interpretation of the results of food-effect studies in addition to dosing and labeling recommendations in relation to regulatory guidance documents.

Predictive Performance of Physiologically Based Pharmacokinetic Models for the Effect of Food on Oral Drug Absorption: Current Status

A comprehensive search in literature and published US Food and Drug Administration reviews was conducted to assess whether physiologically based pharmacokinetic (PBPK) modeling could be prospectively used to predict clinical food effect on oral drug absorption. Among the 48 resulted food effect predictions, ∼50% were predicted within 1.25‐fold of observed, and 75% within 2‐fold. Dissolution rate and precipitation time were commonly optimized parameters when PBPK modeling was not able to capture the food effect. The current work presents a knowledgebase for documenting PBPK experience to predict food effect.

Effects of High- and Low-Fat Meals on the Pharmacokinetics of Ozanimod, a Novel Sphingosine-1-Phosphate Receptor Modulator

Ozanimod (RPC1063) is an oral selective modulator of the sphingosine‐1‐phosphate 1 and 5 receptors under development for the treatment of relapsing multiple sclerosis and inflammatory bowel disease. The effects of high‐fat and low‐fat meals on the pharmacokinetics (PK) of a single oral dose of ozanimod were evaluated in 24 healthy volunteers in a randomized, open‐label crossover trial. Each subject received a 1‐mg dose of ozanimod hydrochloride under 3 meal conditions (fasted, high‐fat, and low‐fat), each separated by 7 days. Mean plasma concentration–time profiles for ozanimod and its active metabolites (RP101988 [major], RP101075 [minor]) were similar under all 3 conditions. Moreover, all PK parameters for ozanimod, RP101988, and RP101075 were similar under the 3 meal conditions. The 90% confidence intervals (CIs) for the ratios of geometric least‐squares mean (fed/fasted) were within the equivalence limits of 0.80 to 1.25 for area under the concentration–time curve from time 0 to infinity (AUC_0–∞) and maximum plasma concentration (C_max) for ozanimod, RP101988, and RP101075, except for the high‐fat effect on RP101075 C_max (90%CI, 0.76–0.88). Given this lack of a food effect on the exposure of ozanimod and its active metabolites, ozanimod can be taken without regard to meals.

Mechanism-Based Modeling of Gastric Emptying Rate and Gallbladder Emptying in Response to Caloric Intake

Bile acids released postprandially modify the rate and extent of absorption of lipophilic compounds. The present study aimed to predict gastric emptying (GE) rate and gallbladder emptying (GBE) patterns in response to caloric intake. A mechanism‐based model for GE, cholecystokinin plasma concentrations, and GBE was developed on data from 33 patients with type 2 diabetes and 33 matched nondiabetic individuals who were administered various test drinks. A feedback action of the caloric content entering the proximal small intestine was identified for the rate of GE. The cholecystokinin concentrations were not predictive of GBE, and an alternative model linking the nutrients amount in the upper intestine to GBE was preferred. Relative to fats, the potency on GBE was 68% for proteins and 2.3% for carbohydrates. The model predictions were robust across a broad range of nutritional content and may potentially be used to predict postprandial changes in drug absorption.

Phospholipid based self-nanoemulsifying self-nanosuspension (p-SNESNS) as a dual solubilization approach for development of formulation with diminished food effect: Fast/fed in vivo pharmacokinetics study in human

The novel self- nanoemulsifying self-nanosuspension (SNESNS) combines the advantages of two efficient solubilization technologies; the nanoemulsion and the nanosuspension. The aim of this study is to test the efficiency of phospholipid based self-nanoemulsifying self-nanosuspension (p-SNESNS) formulation as a powerful tool to diminish the food effect on bioavailability of lurasidone hydrochloride as BCS Class II model drug. Phospholipid was incorporated into SNESNS to increase the solubilization power of the in-situ formed nanoemulsion and facilitate the dispersion of the in-situ formed nanosized drug particles. P-SNESNS was evaluated for particle size, Polydispersity index, in vitro dissolution and transmission electron microscopy (TEM). The drug amount dissolved after water dilution of LSD p-SNESNS was ~2 folds that dissolved after dilution of non-phospholipid SNESNS. The self-nanosuspension obtained by aqueous dilution of p-SNESNS kept the cubic morphology of LSD macroparticles. The high in vitro dissolution of LSD in the non-sink dissolution media (water and Phosphate buffer pH6.8) indicated that the p-SNESNS formulation had successfully increased the drug solubility irrespective of pH of the medium. The pharmacokinetics parameters of LSD p-SNESNS in humans were the same in both the fasted and fed states and were similar to those of LSD capsules in the fed state. Our results propose that p-SNESNS could be promising to increase patient compliance and drug efficiency of BCS class II antipsychotics by diminishing the food effect on their oral absorption and preventing the necessity to administer them with food.

Formulation and Pharmacokinetic Evaluation of Polymeric Dispersions Containing Valsartan

BACKGROUND

Valsartan exhibits poor aqueous solubility and dissolution rate limited absorption. The lower solubility in the upper part of gastrointestinal tract (pH-dependant solubility) where its absorption window exists further contributes to the low oral bioavailability of valsartan.

OBJECTIVE

The present work was aimed to improve the in vivo pharmacokinetics of valsartan by preparing amorphous polymeric dispersions using Eudragit E 100 as carrier. Eudragit E 100 is a cationic polymer soluble in gastric fluid up to pH 5.0 and exhibits pH-dependent release. Hence, the dispersions prepared using Eudragit E 100 rapidly dissolves at lower pH presenting drug in molecularly dispersed and soluble form at its absorption site.

METHODS

Polymeric solid dispersions were prepared in different drug-to-carrier ratios. The prepared dispersions were evaluated for drug-carrier interactions, solid-state transitions and drug-release properties with the help of Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and in vitro dissolution studies. The optimized formulation containing valsartan was tested in rats for bioavailability and pharmacokinetic parameters and compared with that of valsartan pure drug.

RESULTS

The results from FTIR studies indicated no interactions between drug and excipients. DSC studies confirmed reduction in crystallinity of drug. The dissolution studies performed in 0.1 N HCl showed significant improvement (p < 0.05) in the dissolution of valsartan. In vivo pharmacokinetic studies showed 199 % relative bioavailability with significant improvement (p < 0.05) in area under the curve compared to valsartan pure drug.

CONCLUSION

Eudragit E 100 can be used to improve the dissolution of drugs that show low solubility at lower pH and thereby enhancing the bioavailability.

Fixed-dose combination orally disintegrating tablets to treat cardiovascular disease: formulation, in vitro characterization and physiologically based pharmacokinetic modeling to assess bioavailability

Cardiovascular disease (CVD) is the leading cause of death among men and women worldwide. In CVD, hypertension and dyslipidemia commonly coexist and are managed through coadministration of amlodipine and atorvastatin, respectively. The case for fixed-dose combination (FDC) oral dosage forms and orally disintegrating tablet (ODT) technology to enhance outcomes and compliance is strong. This work follows the development and characterization of single and FDC ODTs containing amlodipine and atorvastatin, followed by bioequivalence comparison between these single and FDC formulations, using in vitro dissolution and Caco-2 apparent permeability (Papp) and in silico physiologically based pharmacokinetic modeling approaches. ODTs containing amlodipine (5 mg) and atorvastatin (10 mg) either alone or in combination rapidly disintegrated (<30 s) while displaying a radial crushing strength in excess of 100 N and friability ≤1%. In vitro dissolution test was performed in fasted and fed-state simulated intestinal fluid (FeSSIF) and analyzed using high-performance liquid chromatography. Dissolution profiles for single and FDC ODTs were compared using US FDA recommended difference (f1) and similarity (f2) factor testing for bioequivalence. In all cases, there was no difference in active pharmaceutical ingredient dissolution between single or FDC ODTs, with the exception of amlodipine in FeSSIF. Pharmacokinetic clinical trial simulations were conducted using Simcyp (Version 14), incorporating Papp and dissolution data. Simulated clinical trials in healthy volunteers showed no difference in bioavailability based on pharmacokinetic parameters between single and combination doses with either active pharmaceutical ingredient. An increase in Cmax and AUC for atorvastatin in fed subjects was attributed to extended transit along the gut lumen and reduced atorvastatin metabolism due to lower CYP3A4 expression at more distal small intestine absorption sites. The results demonstrated bioequivalence of an FDC ODT for amlodipine and atorvastatin, while highlighting several limitations of f1 and f2 bioequivalence testing and strengths of mechanistic pharmacokinetic modeling for oral drug absorption.

Mechanistic prediction of food effects for Compound A tablet using PBPK model

Physiologically based pharmacokinetic (PBPK) modeling has been extensively used to study the factors of effect drug absorption, distribution, metabolize and extraction progress in human. In this study, Compound A(CPD A) is a BCS Class II drug, which has been extensive applied in clinical as lipid-lowering drug, administered orally after food, they displayed positive food effects in human, A PBPK model was built to mechanistic investigate the food effect of CPD A tablet in our study. By using gastroplus™ software, the PBPK models accurately predicted the results of food effects and predicted data were within 2-fold error of the observed results. The PBPK model mechanistic illuminated the changes of pharmacokinetic values for the positive food effects of the compound in human. Here in, the PBPK modeling which were combined with ACAT absorption models in it, successfully simulated the food effect in human of the drug. The simulation results were proved that PBPK model can be able to serve as a potential tool to predict the food effect on certain oral drugs.

Can dosage form-dependent food effects be predicted using biorelevant dissolution tests? Case example extended release nifedipine

AIMS

Food intake is known to have various effects on gastrointestinal luminal conditions in terms of transit times, hydrodynamic forces and/or luminal fluid composition and can therefore affect the dissolution behavior of solid oral dosage forms. The aim of this study was to investigate and detect the dosage form-dependent food effect that has been observed for two extended-release formulations of nifedipine using in vitro dissolution tests.

METHODS

Two monolithic extended release formulations, the osmotic pump Adalat® XL 60mg and matrix-type Adalat® Eins 30mg formulation, were investigated with biorelevant dissolution methods using the USP apparatus III and IV under both simulated prandial states, and their corresponding quality control dissolution method. In vitro data were compared to published and unpublished in vivo data using deconvolution-based in vitro - in vivo correlation (IVIVC) approaches.

RESULTS

Quality control dissolution methods tended to overestimate the dissolution rate due to the excessive solubilizing capabilities of the sodium dodecyl sulfate (SDS)-containing dissolution media. Using Level II biorelevant media the dosage form dependent food effect for nifedipine was described well when studied with the USP apparatus III, whereas the USP apparatus IV failed to detect the positive food effect for the matrix-type dosage form.

CONCLUSIONS

It was demonstrated that biorelevant methods can serve as a useful tool during formulation development as they were able to qualitatively reflect the in vivo data.

Efficacy of OZ439 (artefenomel) against early Plasmodium falciparum blood-stage malaria infection in healthy volunteers

Objectives

OZ439, or artefenomel, is an investigational synthetic ozonide antimalarial with similar potency, but a significantly improved pharmacokinetic profile, compared with artemisinins. We wished to measure key pharmacokinetic and pharmacodynamic parameters and the pharmacokinetic/pharmacodynamic relationship of artefenomel in humans to guide the drug's further development as combination therapy in patients.

Patients and methods

We tested artefenomel in the human induced blood-stage malaria (IBSM) model. Plasmodium infection was monitored by quantitative PCR (qPCR) and upon reaching 1000 parasites/mL single doses of 100, 200 and 500 mg of artefenomel were administered orally with evaluation of drug exposure and parasitaemia until rescue treatment after 16 days or earlier, if required.

Results

A single 100 mg dose had only a transient effect, while the 200 mg dose resulted in a significant reduction in parasitaemia before early recrudescence. At the highest (500 mg) dose, initial clearance of parasites below the limit of detection of qPCR was observed, with a 48 h parasite reduction ratio (PRR₄₈) >10 000 and a parasite clearance half-life of 3.6 h (95% CI 3.4–3.8 h). However, at this dose, recrudescence was seen in four of eight subjects 6–10 days after treatment. Pharmacokinetic/pharmacodynamic modelling predicted an MIC of 4.1 ng/mL.

Conclusions

These results confirm the antimalarial potential of artefenomel for use in a single-exposure combination therapy. The observations from this study support and will assist further clinical development of artefenomel.