Insulin-loaded pH-sensitive hyaluronic acid nanoparticles enhance transcellular delivery

Repurposing disulfiram with CuET nanocrystals: Enhancing anti-pyroptotic effect through NLRP3 inflammasome inhibition for treating inflammatory bowel diseases

Drug repurposing offers a valuable strategy for identifying new therapeutic applications for existing drugs. Recently, disulfiram (DSF), a drug primarily used for alcohol addiction treatment, has emerged as a potential treatment for inflammatory diseases by inhibiting pyroptosis, a form of programmed cell death. The therapeutic activity of DSF can be further enhanced by the presence of Cu2+, although the underlying mechanism of this enhancement remains unclear. In this study, we investigated the mechanistic basis of Cu2+-induced enhancement and discovered that it is attributed to the formation of a novel copper ethylthiocarbamate (CuET) complex. CuET exhibited significantly stronger anti-pyroptotic activity compared to DSF and employed a distinct mechanism of action. However, despite its potent activity, CuET suffered from poor solubility and limited permeability, as revealed by our druggability studies. To overcome these intrinsic limitations, we developed a scalable method to prepare CuET nanocrystals (CuET NCs) using a metal coordination-driven self-assembly approach. Pharmacokinetic studies demonstrated that CuET NCs exhibited a 6-fold improvement in bioavailability. Notably, CuET NCs exhibited high biodistribution in the intestine, suggesting their potential application for the treatment of inflammatory bowel diseases (IBDs). To evaluate their therapeutic efficacy in vivo, we employed a murine model of DSS-induced colitis and observed that CuET NCs effectively attenuated inflammation and ameliorated colitis symptoms. Our findings highlight the discovery of CuET as a potent anti-pyroptotic agent, and the development of CuET NCs represents a novel approach to enhance the druggability of CuET.

Bile Acid-Targeted Hyaluronic Acid Nanoparticles for Enhanced Oral Absorption of Deferoxamine

Patients with β-thalassemia and sickle cell disease often rely on blood transfusions which can lead to hemochromatosis and chronic oxidative stress in cells and tissues. Deferoxamine (DFO) is clinically approved to treat hemochromatosis but is suboptimal to patients due to its poor pharmacokinetics which requires long-term infusion regimens. Although the oral route is preferable, DFO has limited oral bioavailability. Studies have shown that hyaluronic acid (HA) and bile acid (BA) can enhance the oral absorption of poorly absorbed drugs. To improve upon the oral delivery of DFO, we report on the synthesis and characterization of HA (MW 15 kD) conjugated to two types of BA, deoxycholic acid (DOCA) and taurocholic acid (TCA), and DFO. The resulting seven polymeric conjugates all formed self-assembled nanoparticles. The degree of BA and DFO conjugation to the HA polymer was confirmed at each step through nuclear magnetic resonance, Fourier transform infrared spectroscopy, and UV-Vis spectroscopy. The best formulations for further in vitro testing were determined based on physicochemical characterizations and included HA-DFO, TCA9-HA-DFO, and DOCA9-HA-DFO. Results from in vitro assays revealed that TCA9-HA-DFO enhanced the permeation of DFO the most and was also less cytotoxic to cells compared to the free drug DFO. In addition, ferritin reduction studies indicated that the conjugation of DFO to TCA9-HA did not compromise its chelation efficiency at equivalent free DFO concentrations. This research provides supportive data for the idea that TCA conjugated to HA may enhance the oral absorption of DFO, improve its cytocompatibility, and maintain its iron chelation efficiency.

Additive manufacturing of wet-spun chitosan/hyaluronic acid scaffolds for biomedical applications

Additive manufacturing (AM) holds great potential for processing natural polymer hydrogels into 3D scaffolds exploitable for tissue engineering and in vitro tissue modelling. The aim of this research activity was to assess the suitability of computer-aided wet-spinning (CAWS) for AM of hyaluronic acid (HA)/chitosan (Cs) polyelectrolyte complex (PEC) hydrogels. A post-printing treatment based on HA chemical cross-linking via transesterification with poly(methyl vinyl ether-alt-maleic acid) (PMVEMA) was investigated to enhance the structural stability of the developed scaffolds in physiological conditions. PEC formation and the esterification reaction were investigated by infrared spectroscopy, thermogravimetric analysis, evolved gas analysis-mass spectrometry, and differential scanning calorimetry measurements. In addition, variation of PMVEMA concentration in the cross-linking medium was demonstrated to strongly influence scaffold water uptake and its stability in phosphate buffer saline at 37 °C. The in vitro cytocompatibility of the developed hydrogels was demonstrated by employing the murine embryo fibroblast Balb/3T3 clone A31 cell line, highlighting that PMVEMA cross-linking improved scaffold cell colonization. The results achieved demonstrated that the developed hydrogels represent suitable 3D scaffolds for long term cell culture experiments.

Microfluidic-assisted preparation of PLGA nanoparticles loaded with insulin: a comparison with double emulsion solvent evaporation method

Poly lactic-co-glycolic acid (PLGA) is an ideal polymer for the delivery of small and macromolecule drugs. Conventional preparation methods of PLGA nanoparticles (NPs) result in poor control over NPs properties. In this research, a microfluidic mixer was designed to produce insulin-loaded PLGA NPs with tuned properties. Importantly; aggregation of the NPs through the mixer was diminished due to the coaxial mixing of the precursors. The micromixer allowed for the production of NPs with small size and narrow size distribution compared to the double emulsion solvent evaporation (DESE) method. Furthermore, encapsulation efficiency and loading capacity indicated a significant increase in optimized NPs produced through the microfluidic method in comparison to DESE method. NPs prepared by the microfluidic method were able to achieve a more reduction of trans-epithelial electrical resistance values in the Caco-2 cells compared to those developed by the DESE technique that leads to greater paracellular permeation. Compatibility and interaction between components were evaluated by differential scanning calorimetry and fourier transform infrared analysis. Also, the effect of NPs on cell toxicity was investigated using MTT test. Numerical simulations were conducted to analyze the effect of mixing patterns on the properties of the NPs. It was revealed that by decreasing flow rate ratio, i.e. flow rate of the organic phase to the flow rate of the aqueous phase, mixing of the two streams increases. As an alternative to the DESE method, high flexibility in modulating hydrodynamic conditions of the microfluidic mixer allowed for nanoassembly of NPs with superior insulin encapsulation at smaller particle sizes.

Double layer spherical nanoparticles with hyaluronic acid coating to enhance oral delivery of exenatide in T2DM rats

Soybean phospholipid was used as an amphiphilic material to form reverse micelles (RMs) in medium glycerol monolinoleate (Maisine) with Exenatide (EXT.) encapsulated in the polar core formed by the hydrophilic part of phospholipid. Cremopher RH40 and caprylocaproyl macrogol-8 glycerides EP/caprylocaproyl polyoxyl-8 glycerides NF (Labrasol) were added as surfactants to prepare reverse micelles-self emulsifying drug delivery system (RMs-SEDDS). On this basis, oil in water (O/W) emulsion was further prepared. By adding DOTAP, the surface of the emulsion was positively charged. Finally, hyaluronic acid wrapping in the outermost layer by electrostatic adsorption and reverse micelles-O/W-sodium hyaluronate (RMs-O/W-HA) nanoparticles containing Exenatide were prepared. RMs-SEDDS was spherical with an average particle size of 213.6 nm and RMs-O/W-HA was double-layered spherical nanoparticle with an average particle size of 309.2 nm. HA coating enhanced the adhesion of nanoparticles (NPs), and RMs-O/W-HA increased cellular uptake through CD44-mediated endocytosis. Pharmacodynamics results showed that RMs-SEDDS and RMs-O/W-HA could reduce blood glucose in type 2 diabetic rats, protect pancreatic β cells to a certain extent, and relieve insulin resistance and hyperlipemia complications with good safety.

Oral insulin delivery: Barriers, strategies, and formulation approaches: A comprehensive review

Diabetes Mellitus is characterized by a hyperglycemic condition which can either be caused by the destruction of the beta cells or by the resistance developed against insulin in the cells. Insulin is a peptide hormone that regulates the metabolism of carbohydrates, proteins, and fats. Type 1 Diabetes Mellitus needs the use of Insulin for efficient management. However invasive methods of administration may lead to reduced adherence by the patients. Hence there is a need for a non-invasive method of administration. Oral Insulin has several merits over the conventional method including patient compliance, and reduced cost, and it also mimics endogenous insulin and hence reaches the liver by the portal vein at a higher concentration and thereby showing improved efficiency. However oral Insulin must pass through several barriers in the gastrointestinal tract. Some strategies that could be utilized to bypass these barriers include the use of permeation enhancers, absorption enhancers, use of suitable polymers, use of suitable carriers, and other agents. Several formulation types have been explored for the oral delivery of Insulin like hydrogels, capsules, tablets, and patches which have been described briefly by the article. A lot of attempts have been made for developing oral insulin delivery however none of them have been commercialized due to numerous shortcomings. Currently, there are several formulations from the companies that are still in the clinical phase, the success or failure of some is yet to be seen in the future.

Acyl Hydrazides and Acyl Hydrazones as High-Performance Chemical Exchange Saturation Transfer MRI Contrast Agents

Chemical exchange saturation transfer (CEST) MRI is a versatile molecular imaging approach that holds great promise for clinical translation. A number of compounds have been identified as suitable for performing CEST MRI, including paramagnetic CEST (paraCEST) agents and diamagnetic CEST (diaCEST) agents. DiaCEST agents are very attractive because of their excellent biocompatibility and potential for biodegradation, such as glucose, glycogen, glutamate, creatine, nucleic acids, et al. However, the sensitivity of most diaCEST agents is limited because of small chemical shifts (1.0-4.0 ppm) from water. To expand the catalog of diaCEST agents with larger chemical shifts, herein, we have systematically investigated the CEST properties of acyl hydrazides with different substitutions, including aromatic and aliphatic substituents. We have tuned the labile proton chemical shifts from 2.8-5.0 ppm from water while exchange rates varied from ~680 to 2340 s^-1 at pH 7.2, which allows strong CEST contrast on scanners down to B₀ = 3 T. One acyl hydrazide, adipic acid dihydrazide (ADH), was tested on a mouse model of breast cancer and showed nice contrast in the tumor region. We also prepared a derivative, acyl hydrazone, which showed the furthest shifted labile proton (6.4 ppm from water) and excellent contrast properties. Overall, our study expands the catalog of diaCEST agents and their application in cancer diagnosis.

Design and in vitro/in vivo Evaluation of Polyelectrolyte Complex Nanoparticles Filled in Enteric-Coated Capsules for Oral Delivery of Insulin

Insulin is one of the most important drugs in the treatment of diabetes. There is an increasing interest in the oral administration of insulin as it mimics the physiological pathway and potentially reduces the side effects associated with subcutaneous injection. Therefore, insulin-loaded polyelectrolyte complex (PEC) nanoparticles were prepared by the ionic cross-linking method using protamine sulfate as the polycationic and sodium alginate as the anionic polymer. Taguchi experimental design was used for the optimization of nanoparticles by varying the concentration of sodium alginate, the mass ratio of sodium alginate to protamine, and the amount of insulin. The optimized nanoparticle formulation was used for further in vitro characterization. Then, insulin-loaded PEC nanoparticles were placed in hard gelatin capsules and the capsules were enteric-coated by Eudragit L100-55 (PEC-eCAPs). Hypoglycemic effects PEC-eCAPs were determined in vivo by oral administration to diabetic rats. Furthermore, in vivo distribution of PEC nanoparticles was evaluated by fluorescein isothiocyanate (FITC) labelled nanoparticles. The experimental design led to nanoparticles with a size of 194.4 nm and a polydispersity index (PDI) of 0.31. The encapsulation efficiency (EE) was calculated as 95.96%. In vivo studies showed that PEC-eCAPs significantly reduced the blood glucose level of rats at the 8^th hour compared to oral insulin solution. It was concluded that PEC nanoparticles loaded into enteric-coated hard gelatin capsules provide a promising delivery system for the oral administration of insulin.

pH and its applications in targeted drug delivery

Physiologic pH is vital for the normal functioning of tissues and varies in different parts of the body. The varying pH of the body has been exploited to design pH-sensitive smart oral, transdermal and vaginal drug delivery systems (DDS). The DDS demonstrated promising results in hard-to-treat diseases such as cancer and Helicobacter pylori infection. In some cases, a change in pH of tissues or body fluids has also been employed as a useful diagnostic biomarker. This paper aims to comprehensively review the development and applications of pH-sensitive DDS as well as recent advances in the field.

Impact of process stress on protein stability in highly-loaded solid protein/PEG formulations from small-scale melt extrusion

As protein-based therapeutics often exhibit a limited stability in liquid formulations, there is a growing interest in the development of solid protein formulations due to improved protein stability in the solid state. We used small-scale (<3 g) ram and twin-screw extrusion for the solid stabilization of proteins (Lysozyme, BSA, and human insulin) in PEG-matrices. Protein stability after extrusion was systematically investigated using ss-DSC, ss-FTIR, CD spectroscopy, SEM-EDX, SEC, RP-HPLC, and in case of Lysozyme an activity assay. The applied analytical methods offered an accurate assessment of protein stability in extrudates, enabling the comparison of different melt extrusion formulations and process parameters (e.g., shear stress levels, screw configurations, residence times). Lysozyme was implemented as a model protein and was completely recovered in its active form after extrusion. Differences seen between Lysozyme- and BSA- or human insulin-loaded extrudates indicated that melt extrusion could have an impact on the conformational stability. In particular, BSA and human insulin were more susceptible to heat exposure and shear stress compared to Lysozyme, where shear stress was the dominant parameter. Consequently, ram extrusion led to less conformational changes compared to TSE. Ram extrusion showed good protein particle distribution resulting in the preferred method to prepare highly-loaded solid protein formulations.

Biopolymeric nanocarrier: an auspicious system for oral delivery of insulin

Subcutaneous administration of insulin has been practiced for the clinical supervision of diabetes pathogenesis but it is often ineffective to imitate the glucose homeostasis and is always invasive. Therefore, it causes patient discomfort and infection of local tissue. These issues lead to finding an alternative route for insulin delivery that could be effective, promising, and non-invasive. However, delivery of insulin orally is the most suitable route but the rapid breakdown of insulin by the gastrointestinal enzymes becomes a major barrier to this method. Therefore, nanocarriers (which guard insulin against degradation and facilitate its uptake) are preferred for oral insulin delivery. Among various categories of nanocarriers, bio-polymeric nanocarriers draw special attention owing to their hydrophilic, non-toxic, and biodegradable nature. This review provides a detailed overview of insulin-loaded biopolymer-based nanocarriers, which give future direction in the optimization and development of a clinically functional formulation for their effective and safe delivery.

Nanocarriers as a Delivery Platform for Anticancer Treatment: Biological Limits and Perspectives in B-Cell Malignancies

Nanoparticle-based therapies have been proposed in oncology research using various delivery methods to increase selectivity toward tumor tissues. Enhanced drug delivery through nanoparticle-based therapies could improve anti-tumor efficacy and also prevent drug resistance. However, there are still problems to overcome, such as the main biological interactions of nanocarriers. Among the various nanostructures for drug delivery, drug delivery based on polymeric nanoparticles has numerous advantages for controlling the release of biological factors, such as the ability to add a selective targeting mechanism, controlled release, protection of administered drugs, and prolonging the circulation time in the body. In addition, the functionalization of nanoparticles helps to achieve the best possible outcome. One of the most promising applications for nanoparticle-based drug delivery is in the field of onco-hematology, where there are many already approved targeted therapies, such as immunotherapies with monoclonal antibodies targeting specific tumor-associated antigens; however, several patients have experienced relapsed or refractory disease. This review describes the major nanocarriers proposed as new treatments for hematologic cancer, describing the main biological interactions of these nanocarriers and the related limitations of their use as drug delivery strategies.

Trends in the Design and Evaluation of Polymeric Nanocarriers: The In Vitro Nano-Bio Interactions

Different types of natural and synthetic polymeric nanocarriers are being tested for diverse biomedical applications ranging from drug/gene delivery vehicles to imaging probes. The development of such innovative nanoparticulate systems (NPs) should include in the very beginning of their conception a comprehensive evaluation of the nano-bio interactions. Specifically, intrinsic physicochemical properties as size, surface charge and shape may have an impact on cellular uptake, intracellular trafficking, exocytosis and cyto- or genocompatibility. Those properties can be tuned for effectiveness purposes such as targeting intracellular organelles, but at the same time inducing unforeseen adverse nanotoxicological effects. Further, those properties may change due to the adsorption of biological components (e.g. proteins) with a tremendous impact on the cellular response. The evaluation of these NPs is highly challenging and has produced some controversial results. Future research work should focus on the standardization of analytical or computational methodologies, aiming the identification of toxicity trends and the generation of a useful meta-analysis database on polymeric nanocarriers.This chapter covers all the aforementioned aspects, emphasizing the importance of the in vitro cellular studies in the first stages of polymeric nanocarriers development.

Biomedical applications of polysaccharide nanoparticles for chronic inflammatory disorders: Focus on rheumatoid arthritis, diabetes and organ fibrosis

Polysaccharides are biopolymers distinguished by their complex secondary structures executing various roles in microorganisms, plants, and animals. They are made up of long monomers of similar type or as a combination of other monomeric chains. Polysaccharides are considered superior as compared to other polymers due to their diversity in charge and size, biodegradability, abundance, bio-compatibility, and less toxicity. These natural polymers are widely used in designing of nanoparticles (NPs) which possess wide applications in therapeutics, diagnostics, delivery and protection of bioactive compounds or drugs. The side chain reactive groups of polysaccharides are advantageous for functionalization with nanoparticle-based conjugates or therapeutic agents such as small molecules, proteins, peptides and nucleic acids. Polysaccharide NPs show excellent pharmacokinetic and drug delivery properties, facilitate improved oral absorption, control the release of drugs, increases in vivo retention capability, targeted delivery, and exert synergistic effects. This review updates the usage of polysaccharides based NPs particularly cellulose, chitosan, hyaluronic acid, alginate, dextran, starch, cyclodextrins, pullulan, and their combinations with promising applications in diabetes, organ fibrosis and arthritis.

Emerging Theranostic Nanomaterials in Diabetes and Its Complications

Diabetes mellitus (DM) refers to a group of metabolic disorders that are characterized by hyperglycemia. Oral subcutaneously administered antidiabetic drugs such as insulin, glipalamide, and metformin can temporarily balance blood sugar levels, however, long-term administration of these therapies is associated with undesirable side effects on the kidney and liver. In addition, due to overproduction of reactive oxygen species and hyperglycemia-induced macrovascular system damage, diabetics have an increased risk of complications. Fortunately, recent advances in nanomaterials have provided new opportunities for diabetes therapy and diagnosis. This review provides a panoramic overview of the current nanomaterials for the detection of diabetic biomarkers and diabetes treatment. Apart from diabetic sensing mechanisms and antidiabetic activities, the applications of these bioengineered nanoparticles for preventing several diabetic complications are elucidated. This review provides an overall perspective in this field, including current challenges and future trends, which may be helpful in informing the development of novel nanomaterials with new functions and properties for diabetes diagnosis and therapy.

Layered Double Hydroxide Modified with Deoxycholic and Hyaluronic Acids for Efficient Oral Insulin Absorption

Introduction

This study aimed to construct a layered double hydroxide (LDH) nanoparticle delivery system that was modified by deoxycholic acid (DCA) and hyaluronic acid (HA) to increase the bioavailability of oral insulin.

Methods

LDH-DCA-HA was synthesized by the hybridization of DCA and HA with LDH. Subsequently, insulin was loaded onto LDH-DCA-HA, resulting in the formation of INS@LDH-DCA-HA. The in vivo and in vitro mechanisms of insulin release, as well as the efficiency of insulin absorption, were analyzed before and after DCA-HA modification.

Results

MTT assay showed that there was satisfactory biocompatibility between LDH-DCA-HA and Caco-2 cells at a concentration below 1000 μg/mL. Flow cytometry analysis revealed that Caco-2 cells absorbed INS@LDH-DCA-HA more readily than insulin. Measurement of transepithelial electrical resistance indicated that INS@LDH-DCA-HA induced the reversible opening of tight cell junctions, thereby facilitating its absorption. This was confirmed via laser confocal microscopy analysis, revealing that a large amount of zonula occludens-1 tight junction (TJ) protein was utilized for the paracellular pathway of nanoparticles. We also measured the blood glucose levels of type I diabetic mice and found that oral INS@LDH-DCA-HA exerted a steady hypoglycemic effect lasting 12 h, with a small range of postprandial blood glucose fluctuation. Immunofluorescence analysis showed that the strong penetration ability of INS@LDH-DCA-HA allowed insulin to enter epithelial cells more readily than free insulin. Finally, immunohistochemical analysis of anti-SLC10A1 protein confirmed that the cholic acid transporter receptor protein played a key role in the functioning of INS@LDH-DCA-HA.

Conclusion

LDH nanoparticles modified by DCA and HA improved the absorption efficiency of insulin by opening the TJs of cells and interacting with the cholic acid transporter receptor protein.

pH-sensitive polymer-based carriers as a useful approach for oral delivery of therapeutic protein: A review

There are many proteins and enzymes in the human body, and their dysfunction can lead to disease. The use of proteins as a drug is common in various diseases such as diabetes. Proteins are hydrophilic molecules whose spatial structure is critical to their correct function. There are different ways to the administration of proteins. Protein structures are degraded by gastric acid and enzymes in the gastrointestinal tract and have a slight ability to permeation from the gastrointestinal epithelium due to their large hydrophilic nature. Therefore, their oral use has limitations. Since the oral use of drugs is one of the best and easiest routes for patients, many studies have been done to increase the stability, penetration and ultimately increase the bioavailability of proteins through oral administration. One of the studied strategies for oral delivery of protein is the use of pH-sensitive polymer-based carriers. These carriers use different pH-sensitive polymers such as eudragit®, chitosan, dextran, and alginate. The use of pH-sensitive polymer-based carriers by protecting the protein from stomach acid (low pH) and degrading enzymes, increasing permeability, and maintaining the spatial structure of the protein leads to increased bioavailability. In this review, we focus on the various polymers used to prepare pH-sensitive polymer-based carriers for the oral delivery of proteins.

Spray Freeze Dried Lyospheres® for Nasal Administration of Insulin

Pharmacologically active macromolecules, such as peptides, are still a major challenge in terms of designing a delivery system for their transport across absorption barriers and at the same time provide sufficiently high long-term stability. Spray freeze dried (SFD) lyospheres^® are proposed here as an alternative for the preparation of fast dissolving porous particles for nasal administration of insulin. Insulin solutions containing mannitol and polyvinylpyrrolidone complemented with permeation enhancing excipients (sodium taurocholate or cyclodextrins) were sprayed into a cooled spray tower, followed by vacuum freeze drying. Final porous particles were highly spherical and mean diameters ranged from 190 to 250 µm, depending on the excipient composition. Based on the low density, lyospheres resulted in a nasal deposition rates of 90% or higher. When tested in vivo for their glycemic potential in rats, an insulin-taurocholate combination revealed a nasal bioavailability of insulin of 7.0 ± 2.8%. A complementary study with fluorescently labeled-dextrans of various molecular weights confirmed these observations, leading to nasal absorption ranging from 0.7 ± 0.3% (70 kDa) to 10.0 ± 3.1% (4 kDa). The low density facilitated nasal administration in general, while the high porosity ensured immediate dissolution of the particles. Additionally, due to their stability, lyospheres provide an extremely promising platform for nasal peptide delivery.

Is hyaluronic acid the perfect excipient for the pharmaceutical need?

Hyaluronic acid has become an interesting and important polymer as an excipient for pharmaceutical products due to its beneficial properties, like solubility, biocompatibility and biodegradation. To improve the properties of hyaluronic acid, different possibilities for chemical modifications are presented, and the opportunities as novel systems for drug delivery are discussed. This review gives an overview over the production of hyaluronic acid, the possibilities of its chemical modification and the current state of in vitro and in vivo research. Furthermore, market approved and commercially available products are reviewed and derivatives undergoing clinical trials and applying for market approval are shown. In particular, hyaluronic acid has been studied for different administrations in rheumatology, ophthalmology, local anesthetics, cancer treatment and bioengineering of tissues. The present work concludes with perspectives for future administration of pharmaceuticals based on hyaluronic acid.

Decreased recurrence of symptoms in oral lichen planus with intralesional injection of hyaluronic acid and triamcinolone

Oral lichen planus (OLP) is a chronic non-infectious, inflammatory, immunological disease. In contrast to skin lesions, which are often self-limiting, oral lesions rarely heal on their own and can be resistant to local and systemic treatments. In this clinical trial, hyaluronic acid (HA) was mixed with triamcinolone for intralesional injection to reduce side effects in the treatment of OLP. This randomized clinical trial with a split-mouth design was performed on 28 patients with OLP. The mouth was divided randomly into two sides: a test side, which received HA combined with triamcinolone, and a control side, which received triamcinolone alone. The rate of symptom recurrence was 74.1% on the control side and 11.1% on the test side (significant difference, P<0.01). Pain scores did not differ between the two groups when assessed after 2 weeks. The group treated with a combination of HA and triamcinolone experienced a significantly better resolution of lesions and symptoms. Considering the role of HA in tissue healing and in regulating inflammatory responses, as well as its antioxidant and hydration properties, it appears that HA could be effective in improving of OLP and decreasing the rate of symptom recurrence.

The role of polysaccharides from natural resources to design oral insulin micro- and nanoparticles intended for the treatment of Diabetes mellitus: A review

Oral administration of insulin (INS) would represent a revolution in the treatment of diabetes, considering that this route mimics the physiological dynamics of endogenous INS. Nano- and microencapsulation exploiting the advantageous polysaccharides properties has been considered an important technological strategy to protect INS against harsh conditions of gastrointestinal tract, in the same time that improve the permeability via transcellular and/or paracellular pathways, safety and in some cases even selectivity for targeting delivery of INS. In fact, some polysaccharides also give to the systems functional properties such as pH-responsiveness, mucoadhesiveness under specific physiological conditions and increased intestinal permeability. In general, all polysaccharides can be functionalized with specific molecules becoming more selective to the cells to which INS is delivered. The present review highlights the advances in the past 10 years on micro- and nanoencapsulation of INS exploiting the unique natural properties of polysaccharides, including chitosan, starch, alginate, pectin, and dextran, among others.

Development of Aggregation-Caused Quenching Probe-Loaded Pressurized Metered-Dose Inhalers with Fluorescence Tracking Potentials

Recently, pressurized metered-dose inhalers (pMDIs) are getting more attention as an effective approach of pulmonary drug delivery, and nanoparticle-based formulations have become a new generation of pMDIs, especially for water insoluble drugs. Up until now, there is no clinical application of nanoparticle-based pMDIs. The main hurdle remains in the lack of knowledge of the in vivo fate of those systems. In this study, a fluorescent probe named P4 with aggregation-caused quenching (ACQ) effect was loaded in the nanoparticle-based pMDIs to track the in vivo fate. P4 probe expressed strong fluorescence when distributed in intact nanoparticles, but quenched in the in vivo aqueous environment due to molecular aggregation. Experimentally, P4 probe was encapsulated into solid lipid nanoparticles (SLN) as P4-SLN, and then, the formulation of pMDIs was optimized. The content (w/w) of the optimal formulation (P4-SLN-pMDIs) was as follows: 6.02% Pluronic® L64, 12.03% ethanol, 0.46% P4-SLN, and 81.49% 1,1,1,2-tetrafluoroethane (HFA-134a). P4-SLN-pMDI was transparent in appearance, possessed a particle size of 132.07 ± 3.56 nm, and the fine particle fraction (FPF) was 39.53 ± 1.94%, as well good stability was shown within 10 days. The results indicated P4-SLN-pMDI was successfully prepared. Moreover, the ACQ property of P4-SLN-pMDIs was verified, which ensured the fluorescence property as a credible tool for in vivo fate study. Taken together, this work established a platform that could provide a firm theoretical support for exploration of the in vivo fate of nanoparticle-based pMDIs in subsequent studies. Grapical abstract.

Williams G, Brocchini S, Awwad S. Injectables and Depots to Prolong Drug Action of Proteins and Peptides

Proteins and peptides have emerged in recent years to treat a wide range of multifaceted diseases such as cancer, diabetes and inflammation. The emergence of polypeptides has yielded advancements in the fields of biopharmaceutical production and formulation. Polypeptides often display poor pharmacokinetics, limited permeability across biological barriers, suboptimal biodistribution, and some proclivity for immunogenicity. Frequent administration of polypeptides is generally required to maintain adequate therapeutic levels, which can limit efficacy and compliance while increasing adverse reactions. Many strategies to increase the duration of action of therapeutic polypeptides have been described with many clinical products having been developed. This review describes approaches to optimise polypeptide delivery organised by the commonly used routes of administration. Future innovations in formulation may hold the key to the continued successful development of proteins and peptides with optimal clinical properties.

An Enteric-Coated Polyelectrolyte Nanocomplex Delivers Insulin in Rat Intestinal Instillations when Combined with a Permeation Enhancer

The use of nanocarriers is being researched to achieve oral peptide delivery. Insulin-associated anionic polyelectrolyte nanoparticle complexes (PECs) were formed that comprised hyaluronic acid and chitosan in an optimum mass mixing ratio of 5:1 (MR 5), followed by coating with a pH-dependent polymer. Free insulin was separated from PECs by size exclusion chromatography and then measured by HPLC. The association efficiency of insulin in PECs was >95% and the loading was ~83 µg/mg particles. Dynamic light scattering and nanoparticle tracking analysis of PECs revealed low polydispersity, a negative zeta potential range of −40 to −50 mV, and a diameter range of 95–200 nm. Dissolution studies in simulated small intestinal fluid (FaSSIF-V2) revealed that the PECs were colloidally stable. PECs that were coated with Eudragit^® L-100 delayed insulin release in FaSSIF-V2 and protected insulin against pancreatin attack more than uncoated PECs. Uncoated anionic PECs interacted weakly with mucin in vitro and were non-cytotoxic to Caco-2 cells. The coated and uncoated PECs, both concentrated further by ultrafiltration, permitted dosing of 50 IU/kg in rat jejunal instillations, but they failed to reduce plasma glucose or deliver insulin to the blood. When ad-mixed with the permeation enhancer (PE), sucrose laurate (100 mM), the physicochemical parameters of coated PECs were relatively unchanged, however blood glucose was reduced by 70%. In conclusion, the use of a PE allowed for the PEC-released bioactive insulin to permeate the jejunum. This has implications for the design of orally delivered particles that can release the payload when formulated with enhancers.

Polymeric nano-vesicles via intermolecular action to load and orally deliver insulin with enhanced hypoglycemic effect

Insulin (INS) was loaded into PEOP nano-vesicles via intermolecular actions and delivered orally through lymphatic transport with promising hypoglycemic effect.

Cholesterol moieties as building blocks for assembling nanoparticles to achieve effective oral delivery of insulin

The amphiphilic cholesterol-phosphate conjugate can fabricate into cholesterol-coated nanoparticles by reverse emulsion method. The nanoparticles generated a rapid-onset and long-lasting hypoglycemic effect following gavage in T1DM rats.

Biomaterial-tight junction interaction and potential impacts

The active pharmaceutical ingredients (APIs) have to cross the natural barriers and get into the blood to impart the pharmacological effects. The tight junctions (TJs) between the epithelial cells serve as the major selectively permeable barriers and control the paracellular transport of the majority of hydrophilic drugs, in particular, peptides and proteins. TJs perfectly balance the targeted transport and the exclusion of other unexpected pathogens under the normal conditions. Many biomaterials have shown the capability to open the TJs and improve the oral bioavailability and targeting efficacy of the APIs. Nevertheless, there is limited understanding of the biomaterial-TJ interactions. The opening of the TJs further poses the risk of autoimmune diseases and infections. This review article summarizes the most updated literature and presents insights into the TJ structure, the biomaterial-TJ interaction mechanism, the benefits and drawbacks of TJ disruption, and methods for evaluating such interactions.

Polymer-Based Nanoparticle Strategies for Insulin Delivery

Diabetes mellitus (DM) is a chronic metabolic illness estimated to have affected 451 million individuals to date, with this number expected to significantly rise in the coming years. There are two main classes of this disease, namely type 1 diabetes (T1D) and type 2 diabetes (T2D). Insulin therapy is pivotal in the management of diabetes, with diabetic individuals taking multiple daily insulin injections. However, the mode of administration has numerous drawbacks, resulting in poor patient compliance. In order to optimize insulin therapy, novel drug delivery systems (DDSes) have been suggested, and alternative routes of administration have been investigated. A novel aspect in the field of drug delivery was brought about by the coalescence of polymeric science and nanotechnology. In addition to polymeric nanoparticles (PNPs), insulin DDSes can incorporate the use of nanoplatforms/carriers. A combination of these systems can bring about novel formulations and lead to significant improvements in the drug delivery system (DDS) with regard to therapeutic efficacy, bioavailability, increased half-life, improved transport through physical and chemical barriers, and controlled drug delivery. This review will discuss how recent developments in polymer chemistry and nanotechnology have been employed in a multitude of platforms as well as in administration routes for the safe and efficient delivery of insulin for the treatment of DM.

Investigating the Bioaccessibility and Bioavailability of Cadmium in a Cooked Rice Food Matrix by Using an 11-Day Rapid Caco-2/HT-29 Co-culture Cell Model Combined with an In Vitro Digestion Model

Investigating the bioaccessibility and bioavailability of Cd based on real contaminated cooked rice matrixes helps establish an accurate risk assessment method and effectively reduce the digestion and absorption of Cd. An 11-day in vitro rapid Caco-2/HT-29 co-culture cell model was used to establish and evaluate the simulation of the absorption and transport of Cd in the small intestine with a 70:30 Caco-2/HT-29 co-culture ratio and 1.0 mmol L^-1 butyric acid as a differentiation inducer. The bioaccessibility and bioavailability of Cd in cooked rice were studied using the cell model combined with an in vitro digestion model. The bioaccessibility of Cd of each of the three cooked rice samples was significantly higher in the gastric phase (59.04-80.23%) than in the gastrointestinal phase (37.14-52.93%). Despite the extension of the digestion time of the gastrointestinal phase, no significant difference was found among the time points. Results demonstrated that the amount of undigested residue, not the level of Cd contamination, significantly contributed to the bioaccessibility of Cd, which was affected by pH or ion. The absorption rate of Cd (25.08% ± 3.05%) was greater than the values obtained using the pure Caco-2 cell models. The bioavailability of Cd (8.29% ± 1.95%) was almost similar to that of Zn²⁺ (6.66% ± 1.41%) in the cooked rice matrix, indicating that the intestinal epithelium expressed a strong absorptive capacity of Cd during the absorption of essential metallic elements. The 11-day rapid Caco-2/HT-29 co-culture cell model combined with the in vitro digestion model was an efficient tool for studying the bioaccessibility and bioavailability of Cd or other substances in a food matrix to further investigate mechanistic steps and screen a broad set of food matrix factors.

Preparation and characterization of insulin chitosan-nanoparticles loaded in buccal films

Chitosan nanoparticles loaded with insulin (IN-CS-NPs) were prepared using ionic gelation method using sodium tripolyphophate as a crosslinker. Later the nanoparticles (NPs) were dispersed in buccal films. The physicochemical properties and the morphology of the nanoparticles were characterized. The stability and release of insulin from the NPs were investigated. Buccal films were prepared separately and their properties such as the weight, thickness, pH, and mucoadhesiveness were investigated. The best film was used to disperse IN-CS-NPs and the loaded film was characterized. The nanoparticles size, polydispersity index, zeta potential, entrapment efficacy, and the loading capacity were 325.07 ± 1.32 nm, 0.38 ± 0.03 and 8.41 ± 0.80 mV, and 73.27 and 18.03%, respectively. The weight and thickness of the loaded film with IN-CS-NPs were 23.0 ± 3.0 mg and 0.32 ± 0.04 mm, respectively and the mucoadhesive force was 2.3 ± 0.2 N. The drug was stable in the NPs and in the films for three months, and its release was controlled by the film and the nanoparticles. Finally, the films loaded with IN-CS-NPs were studied in vivo and were compared to the commercially available insulin. The films prepared in this work were found to decrease glucose level significantly in diabetic rats.

Hyaluronic Acid Decorated Naringenin Nanoparticles: Appraisal of Chemopreventive and Curative Potential for Lung Cancer

Lung carcinoma is the most common cancer in men and second in women (preceded by breast cancer) worldwide. Around 1 in 10 of all cancers diagnosed in men, lung cancer contributed to a total fraction of 20% cancer deaths. Naringenin (NAR) is well known for its chemopreventive properties since ancient times but lacks an appropriate delivery carrier. The objective of present study was to expand the functionality of naringenin loaded poly caprolactone (PCL) nanoparticles in terms of release, chemoprevention and therapeutics. Polymeric nanoparticles such as PCL lack target specificity; hence, surface modification was attempted using layer by layer technique (LBL) to achieve improved and desired delivery as well as target specificity. The designing of Hyaluronic acid (HA) decorated PCL nanoparticles were prepared by utilizing self-assembling LBL technique, where a polycationic layer of a polymer was used as a linker for modification between two polyanionic layers. Additionally, an attempt has been made to strengthen the therapeutic efficacy of PCL nanocarriers by active targeting and overcoming the extracellular matrix associated barriers of tumors using HA targeting cluster determinant 44 receptor (CD44). Cell cytotoxicity study on A549 cells and J774 macrophage cells depicted enhanced anticancer effect of NAR-HA@CH-PCL-NP with safe profile on macrophages. Uptake study on A549 cells advocated enhanced drug uptake by cancer cells. Cell cycle arrest analysis (A549 cell lines) demonstrated the superior cytotoxic effect and active targeting of NAR-HA@CH-PCL-NP. Further chemopreventive treatment with NAR-HA@CH-PCL-NP was found effective in tumor growth inhibitory effect against urethane-induced lung cancer in rat. In conclusion, developed formulation possesses a promising potential as a therapeutic and chemopreventive agent against urethane-induced lung carcinoma in albino wistar rats.

Preparation and characterization of layer-by-layer hypoglycemic nanoparticles with pH-sensitivity for oral insulin delivery

We developed an insulin oral delivery system with the combination of pH-sensitive material and structure to avoid intestinal degradation.

pH-Responsive carriers for oral drug delivery: challenges and opportunities of current platforms

Oral administration is a desirable alternative of parenteral administration due to the convenience and increased compliance to patients, especially for chronic diseases that require frequent administration. The oral drug delivery is a dynamic research field despite the numerous challenges limiting their effective delivery, such as enzyme degradation, hydrolysis and low permeability of intestinal epithelium in the gastrointestinal (GI) tract. pH-Responsive carriers offer excellent potential as oral therapeutic systems due to enhancing the stability of drug delivery in stomach and achieving controlled release in intestines. This review provides a wide perspective on current status of pH-responsive oral drug delivery systems prepared mainly with organic polymers or inorganic materials, including the strategies used to overcome GI barriers, the challenges in their development and future prospects, with focus on technology trends to improve the bioavailability of orally delivered drugs, the mechanisms of drug release from pH-responsive oral formulations, and their application for drug delivery, such as protein and peptide therapeutics, vaccination, inflammatory bowel disease (IBD) and bacterial infections.

Overviews on the cellular uptake mechanism of polysaccharide colloidal nanoparticles

Nanoparticulate drug/gene carriers have gained much attention in the past decades because of their versatile and tunable properties. However, efficacy of the therapeutic agents can be further enhanced using naturally occurring materials-based nanoparticles. Polysaccharides are an emerging class of biopolymers; therefore, they are generally considered to be safe, non-toxic, biocompatible and biodegradable. Considering that the target of nanoparticle-based therapeutic strategies is localization of biomedical agents in subcellular compartments, a detailed understanding of the cellular mechanism involved in the uptake of polysaccharide-based nanoparticles is essential for safe and efficient therapeutic applications. Uptake of the nanoparticles by the cellular systems occurs with a process known as endocytosis and is influenced by the physicochemical characteristics of nanoparticles such as size, shape and surface chemistry as well as the employed experimental conditions. In this study, we highlight the main endocytosis mechanisms responsible for the cellular uptake of polysaccharide nanoparticles containing drug/gene.

[Preparation of nanoparticles for sustained insulin release using poly (ethylene glycol) -poly (ε-caprolactone)-poly (N, N-diethylamino-2-ethylmethaerylate)]

OBJECTIVE

To prepare an insulin-loaded nanoparticle assembled using pH-sensitive poly(ethylene glycol)-poly(ε-caprolactone)-poly(N,N-diethylamino-2-ethylmethaerylate) (mPEG-PCL-PDEAEMA) and investigate its performance of sustained insulin release in vitro and its hypoglycemic effects in diabetic rats. METHDOS: mPEG-PCL-PDEAEMA triblock copolymers with different hydrophobic lengths were synthesized by ring opening polymerization (ROP) combined with atom transfer radical polymerization (ATRP). The copolymers were characterized using Fourier-transform Infrared (FT-IR) spectroscopy and proton nuclear magnetic resonance spectroscopy (¹H-NMR). Insulin-loaded nanoparticles were prepared by nanoprecipitation technique, in which the reversible swelling of the pH-sensitive material was used for insulin loading and release. The obtained nanoparticles were further confirmed by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The entrapment efficiency (EE%), drug loading (DL%) and in vitro release characteristics of the insulin- loaded nanoparticles were assessed using BCA protein assay kit. The hypoglycemic effects of the nanoparticles were evaluated by monitoring the glucose levels.

RESULTS

The size of the nanoparticles decreased as pH value increased within the range of 1.2 to 7.4. Using copolymers mPEG5k-PCL13k- PDEAEMA10k and mPEG5k-PCL10k-PDEAEMA10k as the drug carriers, the nanoparticles prepared with an optimal insulin-coplymer mass ratio of 90% had an average size of 181.9∓6.67 nm and 169∓7.1 nm, maximal EE% of (81.99∓1.77)% and (53.12∓0.62)%, and maximal DL% of (42.46∓0.53)% and (32.34∓0.26)%, respectively. Compared with free insulin, the insulin-loaded nanoparticles was capable of sustained insulin release and the release rate was lowered as the hydrophobic length increases. In diabetic rats, the insulin-loaded nanoparticles based on mPEG5k-PCL13k- PDEAEMA10k maintained a sustained hypoglycemic effect for 48 h, which was significantly longer than the time of free insulin.

CONCLUSION

The pH-sensitive triblock copolymer mPEG-PCL-PDEAEMA can serve as a promising candidate of carrier for sustained release of insulin.

[Preparation of nanoparticles for sustained insulin release using poly (ethylene glycol) -poly (ε-caprolactone)-poly (N, N-diethylamino-2-ethylmethaerylate)]

OBJECTIVE

To prepare an insulin-loaded nanoparticle assembled using pH-sensitive poly(ethylene glycol)-poly(ε-caprolactone)-poly(N,N-diethylamino-2-ethylmethaerylate) (mPEG-PCL-PDEAEMA) and investigate its performance of sustained insulin release in vitro and its hypoglycemic effects in diabetic rats. METHDOS: mPEG-PCL-PDEAEMA triblock copolymers with different hydrophobic lengths were synthesized by ring opening polymerization (ROP) combined with atom transfer radical polymerization (ATRP). The copolymers were characterized using Fourier-transform Infrared (FT-IR) spectroscopy and proton nuclear magnetic resonance spectroscopy (1H-NMR). Insulin-loaded nanoparticles were prepared by nanoprecipitation technique, in which the reversible swelling of the pH-sensitive material was used for insulin loading and release. The obtained nanoparticles were further confirmed by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The entrapment efficiency (EE%), drug loading (DL%) and in vitro release characteristics of the insulin- loaded nanoparticles were assessed using BCA protein assay kit. The hypoglycemic effects of the nanoparticles were evaluated by monitoring the glucose levels.

RESULTS

The size of the nanoparticles decreased as pH value increased within the range of 1.2 to 7.4. Using copolymers mPEG5k-PCL13k- PDEAEMA10k and mPEG5k-PCL10k-PDEAEMA10k as the drug carriers, the nanoparticles prepared with an optimal insulin-coplymer mass ratio of 90% had an average size of 181.9∓6.67 nm and 169∓7.1 nm, maximal EE% of (81.99∓1.77)% and (53.12∓0.62)%, and maximal DL% of (42.46∓0.53)% and (32.34∓0.26)%, respectively. Compared with free insulin, the insulin-loaded nanoparticles was capable of sustained insulin release and the release rate was lowered as the hydrophobic length increases. In diabetic rats, the insulin-loaded nanoparticles based on mPEG5k-PCL13k- PDEAEMA10k maintained a sustained hypoglycemic effect for 48 h, which was significantly longer than the time of free insulin.

CONCLUSION

The pH-sensitive triblock copolymer mPEG-PCL-PDEAEMA can serve as a promising candidate of carrier for sustained release of insulin.

Can natural polymers assist in delivering insulin orally?

Diabetes mellitus is one of the most grave and lethal non communicable diseases. Insulin is normally used to medicate diabetes. Due to bioavailability issues, the most regular route of administration is through injection, which may pose compliance problems to treatment. The oral administration thus appears as a suitable alternative, but with several important problems. Low stability of insulin in the gastrointestinal tract and low intestinal permeation are some of the issues. Encapsulation of insulin into polymer-based particles emerges as a plausible strategy. Different encapsulation approaches and polymers have been used in this regard. Polymers with different characteristics from natural or synthetic origin have been assessed to attain this goal, with natural polymers being preferable. Natural polymers studied so far include chitosan, alginate, carrageenan, starch, pectin, casein, tragacanth, dextran, carrageenan, gelatine and cyclodextrin. While some promising knowledge and results have been gained, a polymeric-based particle system to deliver insulin orally has not been introduced onto the market yet. In this review, effectiveness of different natural polymer materials developed so far along with fabrication techniques are evaluated.