MPEG-PCL Copolymeric Micelles for Encapsulation of Azithromycin

Oligoelectrolyte-mediated, pH-triggered release of hydrophobic drugs from non-responsive micelles: Influence of oligo(2-vinyl pyridine)-loading on drug-loading, release and cytotoxicity

pH-responsive polymeric micelles have been extensively studied for nanomedicine and take advantage of pH differentials in tissues for the delivery of large doses of cytotoxic drugs at specific target sites. Despite significant advances in this area, there is a lack of versatile and adaptable strategies to render micelles pH-responsive that could be widely applied to different payloads and applications. To address this deficiency, we introduce the concept of oligoelectrolyte-mediated, pH-triggered release of hydrophobic drugs from non-responsive polymeric micelles as a highly effective approach with broad scope. Herein, we investigate the influence of the oligoelectrolyte, oligo(2-vinyl pyridine) (OVP), loading and polymer molecular weight on the pH-sensitivity, drug loading/release and cytotoxicity of poly(ethylene glycol-b-ε-caprolactone) (PEG-b-PCL) micelles using copolymers with either short or long hydrophobic blocks (PEG4PCL4 and PEG10PCL10, respectively). The micelles were characterized as a function of pH (7.4 to 3.5). Dynamic light scattering (DLS) revealed narrow particle size distributions (PSDs) for both the blank and OVP-loaded micelles at pH 7.4. While OVP encapsulation resulted in an increase in the hydrodynamic diameter (Dh) (cf. blank micelles), a decrease in the pH below 6.5 led to a decrease in the Dh consistent with the ionization and release of OVP and core collapse, which were further supported by proton nuclear magnetic resonance (1H NMR) spectroscopy and UV-visible (UV-vis) spectrophotometry. The change in zeta potential (ζ) with pH for the OVP-loaded PEG4PCL4 and PEG10PCL10 micelles was different, suggesting that the location/distribution of OVP in the micelles is influenced by the polymer molecular weight. In general, co-encapsulation of drugs (doxorubicin (DOX), gossypol (GP), paclitaxel (PX) or 7-ethyl-10-hydroxycamptothecin (SN38)) and OVP in the micelles proceeded efficiently with high encapsulation efficiency percentages (EE%). In vitro release studies revealed the rapid, pH-triggered release of drugs from OVP-loaded PEG10PCL10 micelles within hours, with higher OVP loadings providing faster and more complete release. In comparison, no triggered release was observed for the OVP-loaded PEG4PCL4 micelles, implying a strong molecular weight dependency. In metabolic assays the drug- and OVP-loaded PEG10PCL10 micelles were found to result in significant enhancement of the cytotoxicity compared to drug-loaded micelles (no OVP) or other controls. Importantly, micelles with low OVP loadings were found to be nearly as effective as those with high OVP loadings. These results provide key insights into the tunability of the oligoelectrolyte-mediated approach for the effective formulation of pH-responsive micelles and pH-triggered drug release.

Keratin Formed Bioadhesive Ophthalmic Gel for the Bacterial Conjunctivitis Treatment

Keratin has the potential to function as the gel matrix in an ophthalmic formulation for the encapsulation of the macrolide antibiotic azithromycin. The quality of this formulation was thoroughly evaluated through various analyses, such as in vitro release assessment, rheological examination, intraocular retention studies in rabbits, assessment of bacteriostatic efficacy, and safety evaluations. It is worth mentioning that the gel demonstrated shear thinning properties and exhibited characteristics of an elastic solid, thereby confirming its structural stability. The gel demonstrated a notable affinity for mucosal surfaces in comparison to traditional azithromycin aqueous solutions. In vitro release testing revealed that drug release transpired via diffusion mechanisms, following a first-order kinetic release pattern. Additionally, the formulated gel exhibited remarkable antibacterial efficacy against Staphylococcus aureus and Pseudomonas aeruginosa in bacteriostatic evaluations. Lastly, safety assessments confirmed that the gel eye drops induced minimal irritation and displayed no apparent cytotoxicity, indicating their good safety and biocompatibility for ocular application. Thus, these findings indicated that the prepared azithromycin gel eye drops complied with the requisite standards for ophthalmic preparations.

Development and characterization of a copolymeric micelle containing soluble and insoluble model drugs

OBJECTIVES

Micelles are nano-sized particles with a core-shell structure that are made by natural or synthetic polymers or copolymers. The aim of this study was to develop and characterize a copolymeric micelle using two polymers loaded with hydrophilic and lipophilic drugs.

METHODS

Poly(ethylene glycol) and poly(ε-caprolactone) (PEG-PCL) were used to form a copolymeric micelle which was further loaded with either moxifloxacin or clarithromycin as hydrophilic and lipophilic drug samples, respectively. Characterization tests were done including fourier transform-infrared (FT-IR) spectroscopy, proton nuclear magnetic resonance (1H NMR) spectroscopy, encapsulation efficiency, particle size, zeta potential, polydispersity index, transmission electron microscopy, and in-vitro release test.

RESULTS

The construction of the copolymer was confirmed by the results of FT-IR and 1H NMR spectroscopy tests. The encapsulation efficiency test exhibited that loading was about 50% for twelve formulations. Particle size, zeta potential, polydispersity index, and transmission electron microscopy confirmed the formation of monodispersed, uniform, and nano-sized micelles with a few negative charges. The kinetic model of release was fitted to the Higuchi model.

CONCLUSIONS

Polymeric micelles consisting of PEG-PCL copolymer were loaded with adequate concentrations of hydrophilic (moxifloxacin) and lipophilic (clarithromycin) model drugs, with a mean particle size under 300 nm. Therefore, copolymeric micelles can be used as a suitable drug delivery system for mucous membranes and skin.

PEGylated Erlotinib HCl Injectable Nanoformulation for Improved Bioavailability

The present study was undertaken to synthesize PEGylated monomethoxy poly (ethylene glycol)-poly (ε-Caprolactone) (mPEG-PCL) block copolymer and formulate Erlotinib HCl-loaded mPEG-PCL nanoparticles for enhancing the bioavailability of the drug. Using the ring-opening polymerization technique, PEGylated mPEG-PCL block copolymer was synthesized, and the structure of the copolymer was characterized using FTIR, ¹H-NMR, and DSC techniques. The solvent evaporation approach was used to effectively encapsulate Erlotinib HCl within block copolymeric nanoparticles. Erlotinib HCl-loaded mPEG-PCL nanoparticles had a mean particle size of 146.5 ± 2.37 nm and a zeta potential of -27.8 ± 2.77 mV. The nanoparticles had a percent entrapment efficiency of 80.78 ± 0.09%. The in vitro drug release of Erlotinib HCl-loaded copolymeric nanoparticles showed a slow and sustained release behavior which could be maintained for up to 72 h. The Korsmeyer-Peppas fitting findings indicated that the drug release process followed a non-Fickian diffusion mechanism. The pharmacokinetic (PK) behavior of the developed nanoformulation was studied in albino Wistar rats, and the relative bioavailability of the optimized NP formulation given by intravenous route was found to be 187.33%. The PK data suggested that Erlotinib HCl-loaded mPEG-PCL copolymeric nanoparticles can dramatically alter the PK behavior of Erlotinib HCl and greatly improve the drug's bioavailability by as much as three times when compared to the oral formulation. As a result, it was established that the block copolymeric nanoparticles have promise for the effective encapsulation of Erlotinib HCL for an injectable formulation with increased bioavailability.

Increased brain uptake of pterostilbene loaded folate modified micellar delivery system

Effective chemotherapy for clinical treatment of brain diseases is still lacking due to the poor penetration of the blood-brain barrier (BBB). The aim of this study was to construct a folate modified pterostilbene (Pt) loaded polymeric micellar delivery system (F-Pt/M) with mPEG-PCL as carrier material to aim at penetrating the BBB for brain tissue targeting via receptor-mediated endocytosis. In this study, F-Pt/M was prepared using thin-film hydration method and then optimized by response surface methodology (RSM) with the entrapment efficiency (EE), drug loading (DL) and hydrodynamic diameter (HD) as indexes. The average hydrodynamic diameter and zeta potential of optimal F-Pt/M were 133.2 nm and 24.6 mV, respectively. DL (18.3%) and EE (98.6%) made the solubility of Pt in water about 25 times higher than that of crude Pt. Results of DSC evaluation revealed that drugs were successfully encapsulated inside the polymeric micelles. TEM images showed that homogeneous spherical micellar structures with a narrow size distribution were developed. The release result in vitro showed that F-Pt/M presented sustained release behavior compared to control free Pt solution. Compared to non-targeted Pt/M, F-Pt/M had a significantly higher cytotoxicity against FR-overexpressing A172 cells. In vitro cellular uptake tests illustrated that the micellar delivery system could significantly improve the accumulation of drugs in target cells via receptor-mediated endocytosis. BBB penetration value (P) of F-Pt/M was about 4 folds higher than that of free Pt group. In addition, drug targeting index (DTI) was calculated to determine targeting of F-Pt/M to the brain which was found to be 4.89, implying improved brain targeting was achieved. Hence, the developed F-Pt/M exhibited great potential for delivering more drug molecules across the BBB for the treatment of brain diseases.

Combined Shikonin-Loaded MPEG-PCL Micelles Inhibits Effective Transition of Endothelial-to-Mesenchymal Cells

Introduction

Shikonin is well known for its anti-inflammatory activity in cardiovascular diseases. However, the application of shikonin is limited by its low water solubility and poor bioavailability. Methoxy poly (ethylene glycol)-b-poly (ε-caprolactone) (MPEG-PCL) is considered a promising delivery system for hydrophobic drugs. Therefore, in this study, we prepared shikonin-loaded MPEG-PCL micelles and investigated their effect on endothelial-to-mesenchymal transition (EndMT) induced by inflammatory cytokines.

Methods

Shikonin was encapsulated in MPEG-PCL micelles using an anti-solvent method and the physiochemical characteristics of the micelles (particle size, zeta potential, morphology, critical micelle concentration (CMC), drug loading and encapsulation efficiency) were investigated. Cellular uptake of micelles in human umbilical vein endothelial cells (HUVECs) was evaluated using fluorescence microscopy. In vitro EndMT inhibition was explored in HUVECs by quantitative real-time PCR analysis.

Results

The average particle size of shikonin-loaded MPEG-PCL micelles was 54.57±0.13 nm and 60 nm determined by dynamic light scattering and transmission electron microscopy, respectively. The zeta potential was -6.23±0.02 mV. The CMC of the micelles was 6.31×10-7mol/L. The drug loading and encapsulation efficiency were 0.88±0.08% and 43.08±3.77%, respectively. The MPEG-PCL micelles significantly improved the cellular uptake of cargo with low water solubility. Real-time PCR analysis showed that co-treatment with TNF-α and IL-1β successfully induced EndMT in HUVECs, whereas this process was significantly inhibited by shikonin and shikonin-loaded MPEG-PCL micelles, with greater inhibition mediated by the shikonin-loaded MPEG-PCL micelles.

Conclusion

Shikonin-loaded MPEG-PCL micelles significantly improved the EndMT-inhibiting effect of the free shikonin. MPEG-PCL is suitable for use more generally as a lipophilic drug carrier.

Nanomicelles co-loaded with doxorubicin and salvianolic acid A for breast cancer chemotherapy

Background

Multi-drug delivery system based on polymer carrier is emerging for alleviating dose-limiting toxicities of first-line cytotoxic anticancer drugs, such as doxorubicin (DOX) for breast cancer chemotherapy. By co-loading the premium natural antioxidant salvianolic acid A (SAA) through colloidal self-assembly of amphiphilic copolymer, we herein developed CPMSD, a complex polymeric micellar system to overcome cardiotoxicity associated with DOX.

Results

Optimal formulation was obtained by DOE study and CPMSD micelles were well constructed by using mPEG-PCL for entrapment at a drug–carrier mass ratio of 1:5 and DOX–SAA mass ratio of 1:4. Molecular dynamics simulation revealed the ratiometrical co-encapsulation of SAA into the hydrophobic cavity but DOX to ball-shaped surface of micelles due to hydrophilicity. Characterization study manifested favorable biopharmaceutical properties, such as small and uniform particle size, fairly high drug loading capacity, as well as good colloidal stability and controlled drug release. CPMSD maintained anticancer efficacy of DOX and the action mechanism, which did not be affected by co-administering SAA. More to the point, it was of great benefit to systemic safety and cardioprotective effect against oxidative stress injuries associated with DOX in tumor-bearing mice.

Conclusions

All the findings substantiated that CPMSD would be a promising multifunctional nanosystem of DOX for breast cancer chemotherapy.

Azithromycin-loaded linolenic acid-modified methoxy poly(ethylene glycol) micelles for bacterial infection treatment

In the study, new polymeric micelles loaded with azithromycin were prepared to enhance azithromycin's solubility and evaluate its in vitro/in vivo antibacterial activity against Staphylococcus aureus. Amphiphilic α-Linolenic acid-methoxy poly (ethylene glycol) polymer (MPEG-LNA) was synthesized through DCC-DMAP esterification procedure. Through thin-film hydration method, optimized azithromycin-loaded micelles (AZI-M) were prepared with 87.15% of encapsulation efficiency and 11.07% of drug loading capacity when the ratio of LNA to MPEG was 4. Azithromycin's water-solubility was obviously enhanced due to its loading into the polymeric micelles. The azithromycin-loaded micelles were characterized in terms of x-ray diffraction, Fourier transform infrared spectroscopy, in vitro release, and in vitro/in vivo antibacterial experiments. Although the drug-loaded micelles provided a slow and continuous azithromycin's release in comparison with free azithromycin, in vitro antibacterial activity results confirmed that its effect on the inhibition of bacterial growth and biofilm formation was similar to free azithromycin. It is more interesting that the azithromycin-loaded micelles achieved good in vivo antibacterial therapeutic effect like QiXian® (azithromycin lactobionate injection) in mouse model of intraperitoneal infection. AZI-M can be considered as a potential candidate for in vivo antibiotic therapy of Staphylococcus aureus infections.

Evaluation of the Physicochemical Properties, Pharmacokinetics, and In Vitro Anticancer Effects of Docetaxel and Osthol Encapsulated in Methoxy Poly(ethylene glycol)-b-Poly(caprolactone) Polymeric Micelles

Docetaxel (DTX), a taxane-based anticancer drug, and osthol (OTH), a coumarin-derivative compound, have shown anticancer effects against different types of cancers through various mechanisms. However, these drugs have low solubility in water and low oral bioavailability, and thus their clinical application is difficult. To overcome these problems, we encapsulated DTX and OTH in methoxy poly(ethylene glycol)-b-poly(caprolactone) (mPEG-b-PCL) and conducted studies in vitro and in vivo. We selected a 1:4 ratio as the optimal ratio of DTX and OTH, through combination index analysis in A549 cancer cells, and prepared micelles to evaluate the encapsulation efficiency, drug loading, particle size, and zeta potential. The in vitro drug-release profile showed that DTX/OTH-loaded mPEG-b-PCL micelles could slowly release DTX and OTH. In the clonogenic assay, DTX/OTH-loaded mPEG-b-PCL micelles showed 3.7 times higher inhibitory effect than the DTX/OTH solution. Pharmacokinetic studies demonstrated that micelles in combination with DTX and OTH exhibited increased area under curve and decreased clearance values, as compared with single micelles.

High-drug-loading capacity of redox-activated biodegradable nanoplatform for active targeted delivery of chemotherapeutic drugs

Challenges associated with low-drug-loading capacity, lack of active targeting of tumor cells and unspecific drug release of nanocarriers synchronously plague the success of cancer therapy. Herein, we constructed active-targeting, redox-activated polymeric micelles (HPGssML) self-assembled aptamer-decorated, amphiphilic biodegradable poly (benzyl malolactonate-co-ε-caprolactone) copolymer with disulfide linkage and π-conjugated moieties. HPGssML with a homogenous spherical shape and nanosized diameter (∼150 nm) formed a low critical micellar concentration (10⁻³mg/mL), suggesting good stability of polymeric micelles. The anticancer drug, doxorubicin (DOX), can be efficiently loaded into the core of micelles with high-drug-loading content via strong π–π interaction, which was verified by a decrease in fluorescence intensity and redshift in UV adsorption of DOX in micelles. The redox sensitivity of polymeric micelles was confirmed by size change and in vitro drug release in a reducing environment. Confocal microscopy and flow cytometry assay demonstrated that conjugating aptamers could enhance specific uptake of HPGssML by cancer cells. An in vitro cytotoxicity study showed that the half-maximal inhibitory concentration (IC₅₀) of DOX-loaded HPGssML was two times lower than that of the control group, demonstrating improved antitumor efficacy. Therefore, the multifunctional biodegradable polymeric micelles can be exploited as a desirable drug carrier for effective cancer treatment.