Coupling capillary electrophoresis with mass spectrometry for the analysis of oxidized phospholipids in human high-density lipoproteins

The oxidized 1-palmitoyl-2-arachidonoyl-sn-glycero-3-phosphocholine (ox-PAPC) products in human high-density lipoproteins (HDLs) were investigated by low-flow capillary electrophoresis-mass spectrometry (low-flow CE-MS). To accelerate the optimization, native PAPC (n-PAPC) standard was first analyzed by a commercial CE instrument with a photodiode array detector. The optimal separation buffer contained 60% (v/v) acetonitrile, 40% (v/v) methanol, 20 mM ammonium acetate, 0.5% (v/v) formic acid, and 0.1% (v/v) water. The selected separation voltage and capillary temperature were 20 kV and 23°C. The optimal CE separation buffer was then used for the low-flow CE-MS analysis. The selected MS conditions contained heated capillary temperature (250°C), capillary voltage (10 V), and injection time (1 s). No sheath gas was used for MS. The linear range for n-PAPC was 2.5-100.0 µg/mL. The coefficient of determination (R2 ) was 0.9918. The concentration limit of detection was 1.52 µg/mL, and the concentration limit of quantitation was 4.60 µg/mL. The optimal low-flow CE-MS method showed good repeatability and sensitivity. The ox-PAPC products in human HDLs were determined based on the in vitro ox-PAPC products of n-PAPC standard. Twenty-one ox-PAPC products have been analyzed in human HDLs. Uremic patients showed significantly higher levels of 15 ox-PAPC products than healthy subjects.

Potential of liposomes and lipid membranes for the separation of β-blockers by capillary electromigration and liquid chromatographic techniques

β-Blockers belong to a frequently used class of drugs primarily used to treat heart and circulatory conditions. Here we describe the use of lipid vesicles and liposomes as cell membrane biomimicking models in capillary electromigration (CE) and liquid chromatography (LC) techniques for the investigation of interactions between lipid membranes and β-blockers. In addition to liposomes, the use of commercial intravenous lipid emulsions, and their interactions with β-blockers are also discussed. Different CE and LC instrumental techniques designed for these purposes are introduced. Other methodologies for studying interactions between β-blockers and lipid membranes are also briefly discussed, and the different methodologies are compared. The aim is to give the reader a good overview on the status of the use of liposomes and lipids in CE and LC for studying β-blocker interactions.

Cyclodextrin-micellar electrokinetic chromatography of apolipoproteins on human very low-density lipoprotein

The apolipoproteins (APOs) of human very low-density lipoprotein (VLDL) were investigated by an optimized cyclodextrin-micellar electrokinetic chromatography (CD-MEKC) method. The separation buffer consisted of 20 mM sodium phosphate, 40 mM bile salts (50% sodium cholate and 50% sodium deoxycholate), 25 mM carboxymethyl-β-cyclodextrin (CM-β-CD) (pH 7.0). For CD-MEKC separation, a sample injection time of 12 s, a separation voltage of 15 KV, and a capillary temperature of 15°C were chosen. The optimal CD-MEKC method showed good resolution and repeatability for VLDL APOs. Identification and quantitation of VLDL APOs CI, CIII, and E were based on comparison with human APO standards. Good linear relationships with correlation coefficient (R² ) 0.99 were obtained for APOs CI, CIII, and E standards. For these three APOs, the linear ranges were within 0.01-0.54 mg/mL, and the concentration limits of detection (LODs) were lower than 0.02 mg/mL. Moreover, VLDL APOs from four uremic patients and four healthy subjects were compared. The uremic and healthy CD-MEKC profiles showed dramatic difference. The levels of APO CIII were significantly higher for two patients, and the level of APO E was significantly higher for one patient. This study might be helpful for following the disease development of uremia and cardiovascular disease (CVD) in the future.

Investigating apolipoproteins of human high-density lipoprotein by cyclodextrin-micellar electrokinetic chromatography

A cyclodextrin-micellar electrokinetic chromatography (CD-MEKC) method has been developed to determine the apolipoproteins (apos) of human high-density lipoprotein (HDL). The optimal CD-MEKC conditions included a separation buffer mixture of 5 mM sodium phosphate, 40 mM bile salts (50% sodium cholate and 50% sodium deoxycholate), 25 mM carboxymethyl-β-CD (CM-β-CD) and pH 7.0. The separation voltage was 15 kV, and the capillary temperature was 15℃. The CD-MEKC profiles of human HDL apolipoproteins showed good repeatability and sensitivity. Linear analysis has been performed for human apolipoprotein standards including apos AI, AII, CI, CII, CIII and E. Linear regression lines with coefficients of determination (R²) greater than 0.99 were obtained for apos AI, AII, CI, CII and E. The linear ranges for the six apolipoproteins were within 0.18-0.70 mg/mL, and the concentration limits of detection (LOD) were lower than 0.0617 mg/mL. Apos AI, AII, CI and CIII were identified and quantified in human HDL by comparing with apolipoprotein standards. Furthermore, the CD-MEKC profiles of uremic patients differed significantly from healthy subjects. The concentration ratios of apo AI/apo CIII were significantly lower for uremic patients than healthy subjects. This study demonstrated the feasibility of determining human HDL apolipoproteins by CD-MEKC. In the future, it might help monitor the progression of uremia and cardiovascular disease.

Capillary separation: micellar electrokinetic chromatography

Micellar electrokinetic chromatography (MEKC), a separation mode of capillary electrophoresis (CE), has enabled the separation of electrically neutral analytes. MEKC can be performed by adding an ionic micelle to the running solution of CE without modifying the instrument. Its separation principle is based on the differential migration of the ionic micelles and the bulk running buffer under electrophoresis conditions and on the interaction between the analyte and the micelle. Hence, MEKC's separation principle is similar to that of chromatography. MEKC is a useful technique particularly for the separation of small molecules, both neutral and charged, and yields high-efficiency separation in a short time with minimum amounts of sample and reagents. To improve the concentration sensitivity of detection, several on-line sample preconcentration techniques such as sweeping have been developed.

Sodium maleopimaric acid as pseudostationary phase for chiral separations of amino acid derivatives by capillary micellar electrokinetic chromatography

A new type of chiral surfactant, sodium maleopimaric acid (SMA), was synthesized, and employed for the enantioselective micellar electrokinetic chromatographic (MEKC) separation of amino acid enantiomers derivatized with naphthalene-2,3-dicarboxaldehyde (NDA-D/L-AAs). The effect of the surfactant concentration, type and concentration of the BGE, and buffer pH on the resolution was studied, and optimized conditions were used to evaluate the ability of this new surfactant to perform chiral separations toward NDA-D/L-AAs by MEKC. Enantiomeric separations of NDA-D/L-AAs were achieved with a running buffer consisting of 100 mM borate (pH 9.5) and 20 mM SMA in a 58.5 cm length x 50 microm id capillary. Under the conditions selected, two pairs of tested amino acid enantiomers including NDA-D/L-trptophan (Trp) and NDA-D/L-kynurenine (Kyn) were resolved.

Comparison of two sample preconcentration strategies for the sensitivity enhancement of flavonoids found in Chinese herbal medicine in micellar electrokinetic chromatography with UV detection

Two on-column preconcentration techniques named stacking with reverse migrating micelles (SRMM) and anion selective electrokinetic injection and a water plug-sweeping with reverse migrating micelles (ASIW-sweep-RMM) were used and compared for concentration and separation of flavonoids in Chinese herbs using reverse migration micellar electrokinetic chromatography (RM-MEKC). The optimal background electrolyte (BGE) used for separation and preconcentration was a solution composed of 20mM phosphoric acid (H(3)PO(4))-100mM sodium dodecyl sulfate (SDS)-20% (v/v) acetonitrile (ACN) buffer (pH 2.0), the applied voltage was -15kV. To achieve reasonable results of the two techniques, the conditions which affected preconcentration were examined. A comparison of used techniques with normal hydrodynamic injection (5s), concerning enhancement factors and limits of detection (LODs) was presented. Under the optimum stacking conditions, about 27-37- and 45-194-fold improvement in the detection sensitivity was obtained for SRMM and ASIW-sweep-RMM, respectively, compared to usual hydrodynamic sample injection (5s). The LODs (S/N=3) for SRMM and ASIW-sweep-RMM in terms of peak height, can reach down to 1.15 x 10(-2) microg/ml for hesperetin and 2.4 x 10(-3) microg/ml for nobiletin, respectively. Finally, the amounts of the six flavonoids in extract of Fructus aurantii Immaturus were successfully determined using ASIW-sweep-RMM. The six analytes were baseline separated with sample matrix under the optimum ASIW-sweep-RMM conditions and the experimental results showed that preconcentration was well achieved after the dilution of sample solutions.

Analysis of fullerene-based nanomaterial in serum matrix by CE

With the increasing interest in using nanoparticles as vehicles for drug delivery and image contrast agents, there is a need to develop assays for their detection and quantitation in complex matrices to facilitate monitoring their biodistribution. In this study, we developed a CE approach for the analysis of two nanoparticles: carboxyfullerene (C3) and dendrofullerene (DF1) in both standard solutions and a serum matrix. These highly soluble, charged C(60) derivatives were characterized by CZE using either a bare or dynamically coated fused-silica capillaries. The resolution of both nanoparticles was slightly lower with the coated capillary; however, their migration times were faster. While separation of the DF1 nanoparticles using MEKC resulted in a greater number of observable peaks, the peak profile of C3 was basically unchanged regardless of whether SDS micelles were added to the running buffers or not. The MEKC and/or CZE assays were then used to quantitate the C3 and DF1 nanoparticles in spiked human serum samples. The quantitation of the nanoparticles was linear from 0-500 microg/mL with detection limits ranging from 0.5 to 6 microg/mL.

Application of a Micro Multiphase Laminar Flow on a Microchip for Extraction and Determination of Derivatized Carbamate Pesticides

Determination of carbamate pesticides such as carbaryl, carbofuran, propoxur and bendiocarb was demonstrated on a microchip with newly designed microchannels developed for efficient solvent extraction. The pesticides were hydrolyzed to corresponding naphthols, coupled with p-nitrobenzenediazonium fluoroborate reagent, and then extracted into 1-butanol as colored azo derivatives and detected with a thermal lens microscope. Optimum flow rates for the aqueous and organic phases were evaluated in the continuous-flow chemical process established in the microchip. The calibration lines showed good linearity in the range of concentrations of 0.03 - 3 ppm (10(-7) - 10(-5) M) and a mass detection limit down to a nanogram level was achieved that is at least two orders of magnitude lower than the LODs for conventional spectrophotometric methods. Azo derivatives of the pesticides were successfully separated and identified by micellar electrokinetic chromatography (MEKC) using a sample prepared on a bulk scale.

A pulsed field gradient NMR diffusion investigation of enkephalin peptide-sodium dodecyl sulfate micelle association

Pulsed field gradient NMR (PFG-NMR) diffusion experiments were used to investigate the binding of leucine and methionine enkephalin peptides to anionic sodium dodecyl sulfate (SDS) micelles. The study was undertaken to investigate the mechanism of interaction between enkephalin peptides and SDS micelles and to determine if NMR-derived association constants, K(eq), can predict the elution order in electrokinetic chromatography (EKC). In EKC, peptides are separated on the basis of their interactions with micelles. The Leu-enkephalin peptide-micelle association constant increased from 130 +/- 8 to 1459 +/- 57 and 1744 +/- 64 M(-1), respectively, when an Arg or Lys was added to the C-terminus. The association constant of Leu-enkephalinamide was approximately equal to that of Leu-enkephalin-Arg. Substitution of Phe4 with a Trp or Gly2 with an Ala in the Leu-enkephalin peptides also increased the micelle binding affinity. These results confirm that the interaction of Leu-enkephalin peptides with SDS micelles is largely electrostatic and that the non-polar amino acid side chains interact with the hydrophobic micelle core. The peptide-micelle association constants for the cationic Met-enkephalin peptides were also greater than their zwitterionic counterparts. For example, the Met-enkephalin K(eq) value was 162 +/- 9 M(-1), while the association constants for Met-enkephalin-Arg, Met-enkephalin-Lys, and Met-enkephalinamide were, respectively, 674 +/- 31, 426 +/- 23, and 453 +/- 27 M(-1). In both Met-enkephalin and Met-enkephalinamide, replacing Gly2 with an Ala did not significantly increase the association constant. These results confirm that with the Met-enkephalin peptides, there was little or no interaction of the amino acid side chains with the micelle core. For both the Leu-enkephalin and Met-enkephalin peptides, the association constants were consistent with EKC results, in that the peptides with smaller K(eq) values were found to elute before those with larger association constants.

Stereoselective peptide analysis

The stereochemistry of a peptide determines its spatial features and can profoundly influence its chemical properties and biological activity. Thus, the analysis of the stereochemical properties of a peptide is an important aspect of its characterisation. For such investigations a "selector" that engages in stereoselective interactions with the peptide analytes is often used. A substantiated knowledge of the underlying molecular recognition mechanism will therefore be helpful in understanding existing and developing new stereoselective analysis systems. After a short introduction concerning the fundamentals of peptide stereoisomers and their biological implications, the stereoselective peptide analysis methods described in the literature are comprehensively reviewed. The characteristics and applications of the employed methods based on various techniques including chromatography (pressure- and electrokinetically driven), capillary electrophoresis, nuclear magnetic resonance spectroscopy and mass spectrometry are discussed. The various selectors that have been utilised to discriminate peptide enantiomers and/or diastereomers are described concurrently. The review concludes with an overview of combinations and comparisons of techniques that have been applied to the analysis of peptide stereoisomers and constitute a trend for further developments.

Enantiomer separations by capillary electrochromatography using chiral stationary phases

The applicability of capillary electrochromatography (CEC) using packed capillary column to enantiomer separations was investigated. As chiral stationary phases, OD type packing materials of 5 and 3 microm particle diameters, originally designed for conventional high-performance liquid chromatography (HPLC) were employed. The chiral packing materials were packed by a pressurized method into a 100 microm I.D. fused-silica capillary. Several racemic enantiomers, such as acidic, neutral and basic drug components, were successfully resolved, typically by using acidic or basic solutions containing acetonitrile as mobile phases. The separation efficiencies for some enantiomers in the chiral CEC system using the 5 microm OD type packing were superior to those obtained in HPLC using chiral packings. The plate heights obtained for several enantiomers were 8-13 microm or the reduced plate height of 1.6-2.6, which indicates the high efficiency of this chiral CEC system.

Sweeping of neutral analytes in electrokinetic chromatography with high-salt-containing matrixes

The concept of sweeping neutral analytes using a high-conductivity matrix or under a reduced electric field in micellar electrokinetic chromatography (MEKC) using anionic micelles and in the presence of electroosmotic flow is presented. Three important processes are identified. First, stacking of the micelles at the cathodic interface between the sample solution (S) and background solution (BGS) zones is identified. This is then followed by the sweeping of analyte molecules by the stacked micelles that enter the S zone. Finally, the destacking of the stacked micelles at the anodic interface between the S and BGS zones occurs. The stacking of the micelles improves the focusing effect of sweeping by a factor approximately equal to the ratio of conductivities between the S and BGS zones (ratio = enhancement factor = gamma'). However, the destacking of the stacked micelles broadens the swept zones by a factor approximately equal to 1/gamma'. In effect, the focusing effect of sweeping using a matrix with equal or higher conductivity compared to the BGS will be roughly the same. The micelle stacking and destacking mechanisms are verified experimentally. This paper also provides comments on the mechanism of neutral analyte focusing under similar conditions proposed by another group.

Enantiomer separation of drugs by micellar electrokinetic chromatography using chiral surfactants

A review surveying enantiomer separations by micellar electrokinetic chromatography (MEKC) using chiral surfactants is described. MEKC is one of the most popular techniques in capillary electrophoresis, where neutral compounds can be analyzed as well as charged ones, and the use of chiral micelles enable one to achieve the enantioseparation. The chiral MEKC systems are briefly reviewed according to the types of chiral surfactants along with typical applications. As chiral micelles or pseudostationary phases in MEKC, various natural and synthetic chiral surfactants are used, including several low-molecular-mass surfactants and polymerized surfactants or high-molecular-mass surfactants. Cyclodextrin modified MEKC using chiral micelles is also considered.

Highly-sensitive micellar electrokinetic chromatographic analysis of dioxin-related compounds using on-line concentration

An application study of an on-line concentration technique of neutral analytes for micellar electrokinetic chromatography (MEKC) was carried out in environmental analysis to enhance the UV detection sensitivity. Several dioxins and related compounds, such as dibenzofuran, dibenzo-p-dioxin, 2,3- and 2,7-dichlorodibenzo-p-dioxins, and 2,3,7-trichlorodibenzo-p-dioxin, were used as test solutes. For a highly sensitive separation and detection, cyclodextrin-modified MEKC (CD-MEKC) under acidic conditions was employed as a separation mode and stacking using reverse migrating micelles and a water plug (SRW) as an on-line concentration technique. Almost a 200-fold gain in detection sensitivity was obtained for the model compounds in SRW-CD-MEKC compared to that in normal CD-MEKC without on-line concentration and the limit of detection was found to be around 0.1 ppm for each solute.