Positive Synergy between the Helical Poly(phenylacetylene) Backbones and the Helical L-Proline Oligopeptide Pendants for Enhanced Enantioseparation Properties

A series of optically active helical poly(phenylacetylene)s (PPA-Pro1, PPA-Pro3, PPA-Pro6, PPA-Pro9, and PPA-Pro12) bearing different chain lengths of L-proline oligopeptide in the side chains were obtained by polymerizing the corresponding novel phenylacetylene monomers. The monomer adopted a trans-rich helix structure when the L-proline oligopeptide chain length was longer, according to the optical activities and 2D-NMR analysis. The helical structure could be maintained and significantly influenced the polymers' helical conformation by introducing the L-proline oligopeptide to the pendants. By the way, the morphology of PPA-Pro3 was observed by atomic force microscope (AFM) on highly oriented pyrolytic graphite (HOPG), and the information on the helix direction, pitch, and chain arrangement was obtained. Also, the chiral separation properties of these polymer-based chiral stationary phases (CSPs) were investigated using high-performance liquid chromatography (HPLC). The poly(phenylacetylene)s showed enhanced enantioseparation properties toward various racemates depending on the longer chain length of the L-proline oligopeptide in the pendants and the positive synergy between the helical backbone and helical side chains. Particularly, PPA-Pro9 showed comparable or even superior enantioseparation properties for racemates 2 and 9 to four commercial columns (Daicel Chiralpak or Chiralcel AD, AS, OD, and OT), indicating that these poly(phenylacetylene)-based CSPs have potential practical values. This work presented here provides inspiration for the further development of CSPs based on a new paradigm.

Facile Synthesis of Linear and Cyclic Poly(diphenylacetylene)s by Molybdenum and Tungsten Catalysis

Improved methods for the synthesis of linear and cyclic poly(diphenylacetylene)s by polymerization of the corresponding diphenylacetylenes using MoCl5 - and WCl4 -based catalytic systems have been developed. MoCl5 induces migratory insertion polymerization of diphenylacetylenes in the presence of arylation reagents such as Ph4 Sn and ArSnn Bu3 to produce cis-stereoregular linear poly(diphenylacetyelene)s with high molecular weights (number-average molar mass (Mn )=30,000-3,200,000) in good yields (up to 98 %). On the other hand, WCl4 induces ring expansion polymerization of diphenylacetylenes in the presence of Ph4 Sn or reducing reagents to produce cis-stereoregular cyclic poly(diphenylacetylene)s with high molecular weights (Mn =20,000-250,000) in moderate to good yields (up to 90 %). Both catalytic systems are applicable to the polymerization of various diphenylacetylenes having polar functional groups such as esters that are not efficiently polymerized by conventional methods using WCl6 -Ph4 Sn and TaCl5 -n Bu4 Sn systems.

Solvent-dependent helix inversion in optically active poly(diphenylacetylene)s and their chiral recognition abilities as chiral stationary phases for high-performance liquid chromatography

We report the first example of solvent-dependent helix inversion in poly(diphenylacetylene) (PDPA) derivatives. Asymmetrically substituted PDPAs bearing optically active substituents linked through amide bonds formed preferred-handed helical conformations because of the optically active substituents in the pendants, whose helix-senses were inverted upon thermal annealing in polar solvents such as N,N-dimethylformamide and dimethylsulfoxide and in nonpolar solvents such as tetrachloroethane. Unlike the solvent-dependent helix inversion reported for other dynamic helical polymers, the macromolecular helicity induced in the polymer backbone of these PDPAs upon thermal annealing was stably maintained at room temperature, independent of the solvent polarity. These diastereomeric PDPAs with opposite helix-senses generated almost mirror-imaged left- and right-handed circularly polarized light in the same solvent at room temperature. Taking advantage of this unique solvent-dependent helix inversion property, the diastereomeric PDPAs with opposite helix-senses were coated on macroporous silica gel and applied to chiral stationary phases for high-performance liquid chromatography. Despite having the same optically active substituents on the pendant phenyl rings, they showed completely different chiral recognition abilities toward many racemates depending on the helix-sense of the polymer backbone, and the elution order of the enantiomers was reversed for some racemates. The combination of the helix-sense of the polymer backbone and the chirality of the pendants, which afforded a higher chiral recognition ability, differed depending on the racemates.

Effect of pendant stereostructure on backbone conformation and enantioseparation ability of helical polyacetylene-based chiral stationary phases

Six proline-derived acetylene monomers bearing either two stereocenters (S-mR, S-mS, R-mS, Rac-mS and S-mRac) or one stereocenter (S-mBn) were obtained from commercially available N-(tert-butoxycarbonyl)-prolinal. Under the catalysis of Rh-diene complex, they were converted to the corresponding optically active helical polymers, S-pR, S-pS, R-pS, Rac-pS, S-pRac, and S-pBn. The correlations between configuration and position of stereocenters in pendants with the polymer conformation as well as chiral resolution performance were systematically explored by a combination of nuclear magnetic resonance (NMR), Raman, UV-Vis absorption, electronic/vibration circular dichroism spectroscopies, high-performance liquid chromatography (HPLC), and computational simulation. The configuration of the stereocenter adjacent to polymer mainchain determined the sense of helical conformation and the elution order of analytes, while that of the remote one affected the arrangement of pendants and the scope of analytes that could be discriminated. Among 18 aromatic analytes selected, S-pR could discriminate 10, while S-pS recognized 12. The racemization of adjacent or remote stereocenters greatly reduced the scope of analytes that could be resolved. Based on computer simulations, S-pS had larger recognition space than S-pR, favoring the steric fit with the racemates containing axial chirality. The strength and number of intermolecular hydrogen bondings between enantiomers and CSPs predominantly determined the chiral discrimination.

Macromolecular helicity induction and static helicity memory of poly(biphenylylacetylene)s bearing aromatic pendant groups and their use as chiral stationary phases for high-performance liquid chromatography

Two novel poly(biphenylylacetylene)s (PBPAs) bearing achiral alkylphenyl groups at the 4'-position of the biphenyl pendant through ester linkers with different sequences were synthesized by the rhodium-catalyzed polymerization of the corresponding monomers. The influence of the alkylphenyl pendants and the ester sequences on the macromolecular helicity induction and subsequent static helicity memory was investigated. In addition, the chiral recognition ability as chiral stationary phases for high-performance liquid chromatography of the helicity-memorized PBPAs was also examined. Both polymers formed almost perfect right- and left-handed helical conformations through noncovalent chiral interactions with enantiomeric alcohols, and their induced macromolecular helicities were completely retained ("memorized") after removal of the helix inducer. A PBPA bearing a 4-n-butylphenoxycarbonyl pendant group with a static helicity memory showed a remarkably high chiral recognition ability toward a wide variety of chiral aromatics, including simple point chiral compounds, axially chiral biaryls, a chiral spiro compound, helicenes, and planar chiral cyclophanes, particularly under the reversed-phase conditions.

Recent progress in the development of chiral stationary phases for high-performance liquid chromatography

Separations and analyses of chiral compounds are important in many fields, including pharmaceutical production, preparation of chemical intermediates, and biochemistry. High-performance liquid chromatography using a chiral stationary phase is regarded as one of the most valuable methods for enantiomeric separation and analysis because it is highly efficient, is broadly applicable, and has powerful separation capability. The focus for development of this method is the identification of novel chiral stationary phases with superior recognition performance and good stability. The present article reviews recent progress in the development of new chiral stationary phases for high-performance liquid chromatography between January 2018 and June 2021. These newly reported chiral stationary phases are divided into three categories: small organic molecule-based (cyclodextrin and its derivatives, macrocyclic antibiotics, cinchona alkaloids, and other low molecular weight chiral molecules), macromolecule-based (cellulose and amylose derivatives, chitin and chitosan derivatives, and synthetic helical polymers) and chiral porous material-based (chiral metal-organic frameworks, chiral covalent organic frameworks, and chiral inorganic mesoporous silicas). Each type of chiral stationary phase is discussed in detail.

Understanding the Polymerization of Diphenylacetylenes with Tantalum(V) Chloride and Cocatalysts: Production of Cyclic Poly(diphenylacetylene)s by Low-Valent Tantalum Species Generated in Situ

A systematic investigation of the polymerization of representative diphenylacetylenes with TaCl₅ and cocatalysts suggested that low-valent Ta species, which are formed by in situ reduction of TaCl₅ by the cocatalysts, are involved in the polymerization and that the polymerization reaction proceeds by an insertion ring expansion mechanism via the formation of tantalacyclopentadiene intermediates, rather than the previously considered metathesis mechanism. This polymerization mechanism indicates the production of unprecedented cis-stereoregular cyclic poly(diphenylacetylene)s. Indeed, the possibilities of a cyclic structure and high cis-stereoregularity of the resulting polymers were reasonably supported by the results of their detailed atomic force microscopy (AFM) and NMR analyses, respectively.

Helical springs as a color indicator for determining chirality and enantiomeric excess

Chirality plays a key role in the physiological system, because molecular functionalities may drastically alter due to a change in chirality. We report herein a unique color indicator with a static helicity memory, which exhibits visible color changes in response to the chirality of chiral amines. A difference of less than 2% in the enantiomeric excess (ee) values causes a change in the absorption that is visible to the naked eyes. This was further quantified by digital photography by converting to RGB values. This system relies on the change in the tunable helical pitch of the π-conjugated polymer backbone in specific solvents and allows rapid on-site monitoring of chirality of nonracemic amines, including drugs, and the simultaneous quantitative determination of their ee values.

Enantioseparation by high-performance liquid chromatography on proline-derived helical polyacetylenes

The nature, size, and position of the substituent on the phenyl ring remarkably influence the enantioseparation performance of polyacetylene-based CSPs.

Synthesis of a poly(diphenylacetylene) bearing optically active anilide pendants and its application to a chiral stationary phase for high-performance liquid chromatography

Poly(diphenylacetylene) having optically active anilide pendants (poly-1) were synthesized by the condensation reaction of an optically active carboxylic acid with a key precursor polymer containing amino (-NH₂) groups, which was prepared by the polymerization of a phthalimide-protected diphenylacetylene monomer using WCl₆-Ph₄Sn as a catalyst, followed by phthalimide deprotection in the resulting polymer using hydrazine monohydrate. Poly-1 formed a preferred-handed helical conformation (h-poly-1) upon thermal annealing in DMF because of chirality of the pendant group. Poly-1 and h-poly-1 showed different chiral recognition abilities from the analogous poly(diphenylacetylene)s, having the corresponding optically active amide pendants, as chiral stationary phases (CSPs) for high-performance liquid chromatography. The resolution results with the h-poly-1-based CSP were much better than those with the poly-1-based CSP owing to the preferred-handed macromolecular helicity. Among the tested racemates, the h-poly-1-based CSP exhibited superior chiral recognition ability, especially toward binaphthyl compounds and chiral metal complexes.

Synthesis of poly(phenylacetylene)s containing chiral phenylethyl carbamate residues as coated-type CSPs with high solvent tolerability

Two novel helical poly(phenylacetylene) derivatives containing chiral phenylethyl carbamate residues in the end of each side chain (PPA-S and PPA-R) were synthesized by polymerization of the corresponding phenylacetylene monomers using Rh(nbd)BPh₄ as a catalyst in DMF. The enantioseparation properties of the polymers were evaluated as coated-type chiral stationary phases (CSPs) for high-performance liquid chromatography (HPLC). Under the same chromatographic conditions, PPA-S and PPA-R showed different enantioseparation properties, indicating that the different interactions between the analytes and the polymers, which result from the different chiral phenylethyl carbamate groups in the end of each side chains. Racemates 1, 7, and 8 could be better resolved on PPA-S, while racemate 6 was separated on PPA-R more efficiently. In addition, the coated-type CSPs showed good solvent tolerability and could work without any damage by introducing the polar solvents, such as CHCl₃ and THF, in eluent. Moreover, some racemates could be better resolved on these coated-type CSPs with the addition of THF to the eluent.

β-Cyclodextrin-Immobilized Ni/Graphene Electrode for Electrochemical Enantiorecognition of Phenylalanine

In this work, a Ni/graphene (Ni/G) electrode was designed and fabricated by plasma-enhanced chemical vapor deposition (PECVD) for the ultrasensitive recognition of d- and l-phenylalanine. Through a single-step PECVD process, the Ni/G electrode can achieve better hydrophilicity and larger catalytic surface area, which is beneficial for the electrochemical recognition of bio-objects. After surface modification with β-cyclodextrin, the Ni/G electrode can distinguish d-phenylalanine from l-phenylalanine according to a 0.09 V peak shift in differential pulse voltammetry tests. Moreover, this Ni/G electrode achieved a detection limit as low as 1 nM and a wide linear range from 1 nM to 10 mM toward l-phenylalanine, with great storage stability and working stability.

A comparative study of the self-assembly of achiral and chiral hairy nanoparticles with polystyrene cores and poly(2-hydroxyethylmethacrylate) hairs

Hairy nanoparticles with polystyrene cores (PS cores) and poly(2-hydroxyethylmethacrylate) (PHEMA) shells were synthesized by combining living anionic polymerization and atom transfer radical polymerization (ATRP). The structural characterization was carried out by FT-IR and NMR spectroscopy (¹H NMR, ¹³C NMR, APT ¹³C NMR and ¹H ¹³C HMQC). The thermal stability of the PS cores was not affected by grafting PHEMA on their surfaces. A differential scanning calorimetry (DSC) thermogram of the HNPs showed two distinct transition temperatures indicating microphase separation. Chiral HNPs were prepared by inducing chirality in the achiral HNPs by complexation with R- or S-mandelic acid. The circular dichroism (CD) spectroscopy of complexes of the HNPs/R- or S-mandelic acid indicated the formation of enantiomeric chiral structures. The self-assembled structures formed from the achiral HNPs show different surface morphologies, porous and zigzag, dependent on the solvents used. Blends of polystyrene functionalized with hydroxyl groups and PHEMA show different morphology and thermal properties compared with the core–shell HNP system. The chiral HNPs self-assembled into donut like structures or toroids with sizes in the range between 200 to 5000 nm. The study suggests that chirality can be utilized to develop interesting self-assembled structures.

Chiral hairy nanoparticles (HNP), prepared by complexation of achiral HNPs with R- or S-mandelic acid, self-assemble into toroidal or donut like structures.

Synthesis and enantioseparation of proline-derived helical polyacetylenes as chiral stationary phases for HPLC

Proline-derived aliphatically substituted polyacetylenes with stable helical conformations exhibit an excellent enantioseparation ability as chiral stationary phases of HPLC.

Synthesis of helical π-conjugated polymers bearing pyridine N-oxide pendants and asymmetric allylation of aldehydes in the helical cavity

Catalytically active chiral π-conjugated polymers (poly-1(NO)r) bearing pyridine N-oxide pendants were synthesized by ternary copolymerization of a d-glucose-bound diethynyl compound with two types of thieno[3,4-b]thiophene comonomer, one of which contained a pyridine N-oxide group. When the pyridine N-oxide content in the copolymer was 10 mol% (poly-1(NO)0.10), the polymer backbone formed a one-handed helical structure in acetonitrile. Pyridine N-oxide pendants arranged inside the helical cavity of poly-1(NO)0.10 exhibited catalytic activity for the asymmetric allylation of benzaldehydes, producing the corresponding allyl alcohols with up to 43% ee.

Synthesis of helical poly(phenylacetylene) derivatives bearing diastereomeric pendants for enantioseparation by HPLC

Four novel helical poly(phenylacetylene) derivatives bearing diastereomeric pendants were prepared and used as CSPs in HPLC for enantioseparation.

Influence of different sequences of l-proline dipeptide derivatives in the pendants on the helix of poly(phenylacetylene)s and their enantioseparation properties

Novel helical poly(phenylacetylene)s bearing different sequences of l-proline dipeptide derivative pendants were prepared and used as CSPs in HPLC for enantioseparation.

Helical Polyacetylenes Induced via Noncovalent Chiral Interactions and Their Applications as Chiral Materials

Construction of predominantly one-handed helical polyacetylenes with a desired helix sense utilizing noncovalent chiral interactions with nonracemic chiral guest compounds based on a supramolecular approach is described. As with the conventional dynamic helical polymers possessing optically active pendant groups covalently bonded to the polymer chains, this noncovalent helicity induction system can show significant chiral amplification phenomena, in which the chiral information of the nonracemic guests can transfer with high cooperativity through noncovalent bonding interactions to induce an almost single-handed helical conformation in the polymer backbone. An intriguing "memory effect" of the induced macromolecular helicity is observed for some polyacetylenes, which means that the helical conformations induced in dynamic helical polyacetylene can be transformed into metastable static ones by tuning their helix-inversion barriers. Potential applications of helical polyacetylenes with controlled helix sense constructed by the "noncovalent helicity induction and/or memory effect" as chiral materials are also described.

Chiral stationary phases consisting of π-conjugated polymers bearing glucose-linked biphenyl units: reversible switching of resolution abilities based on a coil-to-helix transition

We have succeeded in developing a novel chiral stationary phase that can reversibly switch resolution abilities based on a coil-to-helix transition in a column.

Synthesis of Optically Active Poly(diphenylacetylene)s Using Polymer Reactions and an Evaluation of Their Chiral Recognition Abilities as Chiral Stationary Phases for HPLC

A series of optically active poly(diphenylacetylene) derivatives bearing a chiral substituent (poly-2S) or chiral and achiral substituents (poly-(2Sx-co-31-x)) on all of their pendant phenyl rings were synthesized by the reaction of poly(bis(4-carboxyphenyl)acetylene) with (S)-1-phenylethylamine ((S)-2) or benzylamine (3) in the presence of a condensing reagent. Their chiroptical properties and chiral recognition abilities as chiral stationary phases (CSPs) for high-performance liquid chromatography (HPLC) were investigated. Poly-2S and poly-(2Sx-co-31-x) (0.06 < x < 0.71) formed a preferred-handed helical conformation with opposite helical senses after thermal annealing despite possessing the same chiral pendant (h-poly-2S and h-poly-(2Sx-co-31-x)). Furthermore, h-poly-2S and h-poly-(2S0.36-co-30.64) emitted circularly polarized luminescence with opposite signs. h-Poly-2S showed higher chiral recognition abilities toward a larger number of racemates than poly-2S without a preferred-handed helicity and the previously reported preferred-handed poly(diphenylacetylene) derivative bearing the same chiral substituent on half of its pendant phenyl rings. h-Poly-(2S0.36-co-30.64) also exhibited good chiral recognition abilities toward several racemates, though the elution order of some enantiomers was reversed compared with h-poly-2S.