Co-Promoted CoNi Bimetallic Nanocatalyst for the Highly Efficient Catalytic Hydrogenation of Olefins

Bimetallic catalysts, especially non-noble metals, hold great potential for substituting for noble metals in catalytic hydrogenation. In present study, a series of Co_xNi_y (x + y = 6) bimetallic catalysts were prepared through the impregnation-reduction method and cyclohexene was chosen as probe-molecule to study the promotion effect of Co on the catalytic olefin hydrogenation reactions. Meanwhile, density functional theory (DFT) was utilized to investigate the formation energies and the charge distribution of CoNi bimetals, as well as the transition state (TS) searches for hydrogen dissociation and migration. The results suggest that bimetals tend to have superior catalytic performance than pure metals, and Co₃Ni₃ shows the highest catalytic activity on the cyclohexene hydrogenation. It was found that the charge transfer from Co to Ni and the alloying give rise to the refinement of CoNi grains and the improvement of its catalytic activity and stability. Thus, it may be possible to obtain better catalytic performance by tuning the metal/metal atomic ratio of bimetals.

Tuning the Catalytic Performance of Cobalt Nanoparticles by Tungsten Doping for Efficient and Selective Hydrogenation of Quinolines under Mild Conditions

Non-noble bimetallic CoW nanoparticles (NPs) partially embedded in a carbon matrix (CoW@C) have been prepared by a facile hydrothermal carbon-coating methodology followed by pyrolysis under an inert atmosphere. The bimetallic NPs, constituted by a multishell core–shell structure with a metallic Co core, a W-enriched shell involving Co₇W₆ alloyed structures, and small WO₃ patches partially covering the surface of these NPs, have been established as excellent catalysts for the selective hydrogenation of quinolines to their corresponding 1,2,3,4-tetrahydroquinolines under mild conditions of pressure and temperature. It has been found that this bimetallic catalyst displays superior catalytic performance toward the formation of the target products than the monometallic Co@C, which can be attributed to the presence of the CoW alloyed structures.

Atomically dispersed Ir/α-MoC catalyst with high metal loading and thermal stability for water-promoted hydrogenation reaction

Synthesis of atomically dispersed catalysts with high metal loading and thermal stability is challenging but particularly valuable for industrial application in heterogeneous catalysis. Here, we report a facile synthesis of a thermally stable atomically dispersed Ir/α-MoC catalyst with metal loading as high as 4 wt%, an unusually high value for carbide supported metal catalysts. The strong interaction between Ir and the α-MoC substrate enables high dispersion of Ir on the α-MoC surface, and modulates the electronic structure of the supported Ir species. Using quinoline hydrogenation as a model reaction, we demonstrate that this atomically dispersed Ir/α-MoC catalyst exhibits remarkable reactivity, selectivity and stability, for which the presence of high-density isolated Ir atoms is the key to achieving high metal-normalized activity and mass-specific activity. We also show that the water-promoted quinoline hydrogenation mechanism is preferred over the Ir/α-MoC, and contributes to high selectivity towards 1,2,3,4-tetrahydroquinoline. The present work demonstrates a new strategy in constructing a high-loading atomically dispersed catalyst for the hydrogenation reaction.

Palladium supported on magnesium hydroxyl fluoride: an effective acid catalyst for the hydrogenation of imines and N-heterocycles

Heterogeneous palladium catalysts were prepared for the effective hydrogenation of imines and N-heterocycles at low loadings without any acid additive.

A General Catalyst Based on Cobalt Core-Shell Nanoparticles for the Hydrogenation of N-Heteroarenes Including Pyridines

Herein, we report the synthesis of specific silica-supported Co/Co3 O4 core-shell based nanoparticles prepared by template synthesis of cobalt-pyromellitic acid on silica and subsequent pyrolysis. The optimal catalyst material allows for general and selective hydrogenation of pyridines, quinolines, and other heteroarenes including acridine, phenanthroline, naphthyridine, quinoxaline, imidazo[1,2-a]pyridine, and indole under comparably mild reaction conditions. In addition, recycling of these Co nanoparticles and their ability for dehydrogenation catalysis are showcased.

Fe Single Atoms and Fe2O3 Clusters Liberated from N-Doped Polyhedral Carbon for Chemoselective Hydrogenation under Mild Conditions

In the area of catalysis, selective reduction of nitro compounds to amino compounds is a colossal challenge due to the existence of competitive reducible functional groups. Herein, an Fe-based catalyst Fe_SAs/Fe₂O_3ACs/N-doped polyhedral carbon (NPC) has been designed and synthesized. As we expected, compared with Fe_SAs and Fe_NPs, Fe_SAs/Fe₂O_3ACs/NPC shows excellent catalytic performance (turnover frequency up to 1923 h^-1, calculated with nitrobenzene), chemoselectivity, and tolerance during the hydrogenation reaction of nitro compounds under room temperature because of the synergistic effects between Fe_SAs and Fe₂O_3ACs. The theoretical calculations show that Fe_SAs prefers to undergo hydrazine decomposition to generate hydrogen and the Fe₂O_3ACs surface is more active toward the nitrobenzene reduction to aniline.

Convenient synthesis of cobalt nanoparticles for the hydrogenation of quinolines in water

Easily accessible cobalt nanoparticles are prepared by hydrolysis of NaBH₄ in the presence of inexpensive Co(ii) salts.

Catalytic Performance of Nanoporous Metal Skeleton Catalysts for Molecular Transformations

Nanoporous metal (MNPore) skeleton catalysts have attracted increasing attention in the field of green and sustainable heterogeneous catalysis owing to their unique three-dimensional nanopore structural features. In general, MNPores are fabricated through chemical or electrochemical corrosive dealloying of monolithic alloys. The dealloying process produces various MNPores with an open nanoporous network structure by formation of concave and convex hyperboloid-like ligaments. The large surface-to-volume ratio compared to bulk metals and high density of steps and kinks on ligaments of the unsupported MNPores make them promising heterogeneous catalyst candidates for highly active and selective molecular transformations. In this context, a variety of heterogeneous catalytic reactions using MNPores as nanocatalysts under gas- and liquid-phase conditions were developed over the last decade. In addition, the bulk metallic shape and mechanistic rigidity of the MNPore catalysts make the processes of catalyst recovery and reuse more facile and greener. This Minireview mainly focuses on the catalytic performance of nanoporous Au, Pd, Cu, and AuPd with respect to the achievements on catalytic applications in various molecular transformations.

Progress in the Chemistry of Tetrahydroquinolines

Tetrahydroquinoline is one of the most important simple nitrogen heterocycles, being widespread in nature and present in a broad variety of pharmacologically active compounds. This Review summarizes the progress achieved in the chemistry of tetrahydroquinolines, with emphasis on their synthesis, during the period from mid-2010 to early 2018.

Accelerated catalytic activity of Pd NPs supported on amine-rich silica hollow nanospheres for quinoline hydrogenation

The ultra-small Pd NPs stabilized by the amine-rich silica hollow nanosphere with a TOF as high as 5052 h⁻¹ are among the most active solid catalysts for quinoline hydrogenation. The high catalytic activity could be mainly attributed to the ultra-small particle size and high surface electron density of Pd NPs.

Supported gold catalysis: from small molecule activation to green chemical synthesis

With diminishing natural resources, there is an ever-increasing demand for cost-effective and sustainable production of fine and commodity chemicals. For this purpose, there is a need for new catalytic methods that can permit efficient and targeted conversion of fossil and biorenewable feedstocks with lower energy requirements and environmental impact. A significant number of industrial catalytic processes are performed by platinum-group-metal (PGM)-based heterogeneous catalysts capable of activating a range of important small molecules, such as CO, O2, H2, and N2. In contrast, there is a general feeling that gold (Au) cannot act as an efficient catalyst because of its inability to activate most molecules, which is essential to any catalytic processes. As a consequence, researchers have long neglected the potential for use of gold as a catalyst. In recent years, however, chemists have put forth tremendous effort and progress in the use of supported gold catalysts to facilitate a variety of useful synthetic transformations. The seminal discovery by Haruta in 1987 that suitably prepared Au-based catalysts were surprisingly active for CO oxidation even at 200 K initiated rapid development of the field. Since then, researchers have widely employed Au-based catalysts in many types of mild chemical processes, with special focus on selective reactions involving small molecules (for example, CO, H2O, O2, or H2) as a reactant. That gold in the form of tiny nanoparticles (NPs, generally less than 5 nm in diameter) can subtly activate the reactant molecules under mild conditions has been evoked to explain the superior effectiveness of gold compared with conventional PGMs. In this context, Au-based catalysts are gaining great significance in developing new green processes with improved selectivity and energy minimization. In this Account, we describe our efforts toward the development of a range of green and selective processes largely through the appropriate choice of Au catalysts coupled with the coactivation of a plethora of simple small molecules. We have focused on developing new mild and selective reductive transformations that can offer efficient alternatives to conventional Au-catalyzed hydrogenation processes. We have demonstrated Au-catalyzed selective transformation involving HCOOH activation, Au-catalyzed selective reduction involving CO and H2O activation, and Au-catalyzed C-N/C-C bond formation via alcohol activation with high selectivity. The interplay between the support and gold plays a critical role in the success of these transformations, thus highlighting the crucial importance of support in tuning the performance of supported Au NPs. Most of the reactions can tolerate a range of functional groups, and some can occur under ambient conditions. Depending on the specific process, we propose several mechanistic scenarios that describe the plausible small-molecule-mediated reaction pathways. Additionally, we have observed an unusual reactant-promoted H2O or H2 activation over supported Au NPs, thus offering new strategies for green and facile synthesis of diverse amides and heteroaromatic nitrogen compounds. We anticipate that key insights into how simple small molecules are activated for further reaction over Au NPs should lead to a better understanding of gold catalysis and the development of new innovative PGM-free technologies.

Synthesis of stable ligand-free gold-palladium nanoparticles using a simple excess anion method

We report a convenient excess anion modification and post-reduction step to the impregnation method which permits the reproducible preparation of supported bimetallic AuPd nanoparticles having a tight particle size distribution comparable to that found for sol-immobilization materials but without the complication of ligands adsorbed on the particle surface. The advantageous features of the modified impregnation materials compared to those made by conventional impregnation include a smaller average particle size, an optimized random alloy composition, and improved compositional uniformity from particle-to-particle resulting in higher activity and stability compared to the catalysts prepared using both conventional impregnation and sol immobilization methods. Detailed STEM combined with EDX analyses of individual particles have revealed that an increase in anion concentration increases the gold content of individual particles in the resultant catalyst, thus providing a method to control/tune the composition of the nanoalloy particles. The improved activity and stability characteristics of these new catalysts are demonstrated using (i) the direct synthesis of hydrogen peroxide and (ii) the solvent-free aerobic oxidation of benzyl alcohol as case studies.