Mucoadhesive microspheres for controlled drug delivery

Effective Ocular Delivery of Eplerenone Using Nanoengineered Lipid Carriers in Rabbit Model

Background

Eplerenone (Epl) is a selective mineralocorticoid-receptor antagonist used for chronic central serous chorioretinopathy treatment. Our goal was to enhance the corneal performance of Epl-loaded nanostructured lipid carriers (NLCs) through surface modification using different coating polymers.

Methods

Epl-loaded modified NLCs (Epl-loaded MNLCs) were prepared by coating the surface of Epl-loaded NLCs using different polymers, namely hyaluronic acid, chitosan oligosaccharide lactate, and hydrogenated collagen. A 3¹×4¹ full factorial design was used to evaluate the effect of the surface modification on the properties of the prepared systems. Selected optimal Epl-loaded MNLCs were further evaluated for in vitro drug release, morphology, pH, rheological properties, corneal mucoadhesion, irritation, and penetration.

Results

Epl-loaded MNLCs were successfully prepared with high drug-entrapment efficiency and nanosized particles with low size distribution. Transmission electron microscopy revealed nanosized spherical particles surrounded by a coating layer of the surface modifier. The pH, refractive index, and viscosity results of the Epl-loaded MNLCs confirmed the ocular compatibility of the systems with no blurring of vision. The safety and ocular tolerance of the optimal MNLCs were confirmed using the hen’s egg test on chorioallantoic membrane and by histopathological evaluation of rabbit eyes treated with the optimal systems. Confocal laser-scanning microscopy of corneal surfaces confirmed successful transcorneal permeation of the Epl-loaded MNLCs compared to the unmodified Epl-loaded NLCs, revealed by higher corneal fluorescence intensity at all time intervals.

Conclusion

Overall, the results confirmed the potential of Epl-loaded MNLCs as a direct approach for Epl ocular delivery.

Assessment of Antimicrobic, Antivirotic and Cytotoxic Potential of Alginate Beads Cross-Linked by Bivalent Ions for Vaginal Administration

Antimicrobial agent abuse poses a serious threat for future pharmacotherapy, including vaginal administration. The solution can be found in simple polymeric systems with inherent antimicrobial properties without the need to incorporate drugs, for instance alginate beads cross-linked by bivalent ions. The main goal of the presented study was to provide improvement on the well-documented cytotoxicity of Cu²⁺ cross-linked alginate. Alginate beads were prepared by external ionotropic gelation by cross-linking with Cu²⁺, Ca²⁺ and Zn²⁺ ions, separately and in mixtures. Morphological properties, swelling capacity, ion release and efficacy against the most common vaginal pathogens (C. albicans, E. coli, E. faecalis and virus strain—human herpesvirus type 1) were evaluated. The prepared particles (particle size 1455.68 ± 18.71–1756.31 ± 16.58 µm) had very good sphericity (0.86 ± 0.04–0.97 ± 0.06). In mixture samples, Cu²⁺ hampered second ion loading, and was also released incompletely (18.75–44.8%) compared to the single ion Cu²⁺ sample (71.4%). Efficacy against the selected pathogens was confirmed in almost all samples. Although anticipating otherwise, ion mixture samples did not show betterment over a Cu²⁺ cross-linked sample in cytotoxicity–pathogen efficacy relation. However, the desired improvement was found in a single ion Zn²⁺ sample whose minimal inhibition concentrations against the pathogens (0.6–6.12 mM) were close to, or in the same mathematical order as, its toxic concentration of 50 (1.891 mM). In summary, these findings combined with alginate’s biocompatibility and biodegradability give the combination solid potential in antimicrobial use.

Designing, structural determination and biological effects of rifaximin loaded chitosan- carboxymethyl chitosan nanogel

Due to the poor solubility and permeability of rifaximin (RFX), it is not effective against intracellular pathogens although it shows strong activity against most bacteria. To develop an effective mucoadhesive drug delivery system with a targeted release in bacterial infection site, RFX-loaded chitosan (CS)/carboxymethyl-chitosan (CMCS) nanogel was designed and systematically evaluated. FTIR, DSC, and XRD demonstrated that the nanogel was formed by interactions between the positively charged NH₃⁺ on CS and CMCS, and the negatively charged COO on CMCS. RFX was encapsulated into the optimized nanogel in amorphous form. The nanogel was a uniform spherical shape with a mean diameter of 171.07 nm. It had excellent sustained release, strong mucin binding ability, and pH-responsive properties of quicker swelling and release at acidic pH. It showed low hemolytic ratio and high antioxidant activity. The present investigation indicated that the CS-nanogel could be potentially used as a promising bacterial responsiveness drug delivery system.

Stimuli-sensitive fatty acid-based microparticles for the treatment of lung cancer

Despite recent advancements in medicine, lung cancer still lacks an effective therapy. In the present study we have decided to combine superparamagnetic iron oxide nanoparticles (SPION) with solid lipid microparticles to develop novel, stimuli-sensitive drug carriers that increase the bioavailability of the anticancer drug (paclitaxel - PAX) through guided accumulation directly at the tumour site and controlled drug delivery. SPION and PAX-loaded microparticles (MPs) were fabricated from lauric acid (LAU) and a mixture of myristic and palmitic acids (MYR/PAL) using hot oil-in-water emulsification method. MP size, surface properties, melting temperature and magnetic mobility were evaluated along with their in vitro efficacy against malignant lung epithelial cells (A549). MPs were spherical in shape with the average particle size between 2 and 3.5 μm and responded to external magnetic field up to the distance of 15 mm. MPs were effectively internalised by the cells. Unloaded or NP-loaded MPs were cytocompatible with A549 cells, while NP + PAX-loaded MPs significantly decreased cell viability and effectively suppressed colony formation. The developed stimuli-sensitive, inhalable MPs have shown promising results as PAX carriers for controlled pulmonary delivery for the treatment of lung cancer.

Real-Time Label-Free Targeting Assessment and in Vitro Characterization of Curcumin-Loaded Poly-lactic-co-glycolic Acid Nanoparticles for Oral Colon Targeting

The exploitation of curcumin for oral disease treatment is limited by its low solubility, poor bioavailability, and low stability. Surface-functionalized poly-lactic-co-glycolic acid (PLGA) nanoparticles (NPs) have shown promising results to ameliorate selective delivery of drugs to the gastro-intestinal tract. In this study, curcumin-loaded PLGA NPs (C-PLGA NPs) of about 200 nm were surface-coated with chitosan (CS) for gastro-intestinal mucosa adhesion, wheat germ agglutinin (WGA) for colon targeting or GE11 peptide for tumor colon targeting. Spectrometric and zeta potential analyses confirmed the successful functionalization of the C-PLGA NPs. Real-time label-free assessment of the cell membrane-NP interactions and NP cell uptake were performed by quartz crystal microbalance coupled with supported lipid bilayers and by surface plasmon resonance coupled with living cells. The study showed that CS-coated C-PLGA NPs interact with cells by the electrostatic mechanism, while both WGA- and GE11-coated C-PLGA NPs interact and are taken up by cells by specific active mechanisms. In vitro cell uptake studies corroborated the real-time label-free assessment by yielding a curcumin cell uptake of 7.3 ± 0.3, 13.5 ± 1.0, 27.3 ± 4.9, and 26.0 ± 1.3 μg per 10⁴ HT-29 cells for noncoated, CS-, WGA-, and GE11-coated C-PLGA NPs, respectively. Finally, preliminary in vivo studies showed that the WGA-coated C-PLGA NPs efficiently accumulate in the colon after oral administration to healthy Balb/c mice. In summary, the WGA- and GE11-coated C-PLGA NPs displayed high potential for application as active targeted carriers for anticancer drug delivery to the colon.

Lipopolysaccharide Polyelectrolyte Complex for Oral Delivery of an Anti-tubercular Drug

Anti-tuberculosis drug delivery has remained a challenge due to inconsistent bioavailability and inadequate sustained-release properties leading to treatment failure. To resolve these drawbacks, a lipopolysaccharide polyelectrolyte complex (PEC) encapsulated with rifampicin (RIF) (as the model drug) was fabricated, using the solvent injection technique (SIT), with soy lecithin (SLCT), and low-molecular-weight chitosan (LWCT). The average particle size and surface charge of RIF-loaded PEC particulates was 151.6 nm and + 33.0 nm, respectively, with noted decreased particle size and surface charge following increase in SLCT-LWCT mass ratio. Encapsulation efficiency (%EE) and drug-loading capacity (%LC) was 64.25% and 5.84%, respectively. Increase in SLCT-LWCT mass ratio significantly increased %EE with a marginal reduction in %LC. In vitro release studies showed a sustained-release profile for the PEC particulate tablet over 24 h (11.4% cumulative release) where the dominant release mechanism involved non-Fickian anomalous transport shifting towards super case II release as SLCT ratios increased (6.4% cumulative release). PEC-tablets prepared without SIT presented with rapid Fickian-diffusion-based drug release with up to 90% RIF release within 4 h. Ex vivo permeability studies revealed that lipopolysaccharide PEComplexation significantly increased the permeability of RIF by ~ 2-fold within the 8-h study period. These results suggest successful encapsulation of RIF within a PEC structure while imparting increased amorphic regions, as indicated by x-ray diffraction, for potential benefits in improved drug dissolution, bioavailability, and dosing.

Inexpensive Apparatus for Fabricating Microspheres for 5-Fluorouracil Controlled Release Systems

The aim of this study was to develop an inexpensive apparatus for fabricating microspheres, based on chitosan, for 5-fluorouracil (5-FU) controlled release. Chitosan microspheres were prepared by precipitation method and the effects of manufacturing parameters (injection and airflow rates) on size distribution microspheres were analyzed by optical and scanning electron microscopy. The results show that the manufacturing parameters, injection and airflow rates, determine the microsphere size distribution. By modulating these parameters, it was possible to produce chitosan microspheres as small as 437 ± 44 μm and as large as 993 ± 18 μm. Chitosan microspheres loaded with 5-FU were also produced using the experimental equipment. The obtained microspheres presented 5-FU controlled release, indicating that the microspheres can be used orally, since they are capable of crossing the stomach barrier and of continuing with the process of 5-FU release.

Preparation and Characterization of Mucoadhesive Nanoparticles for Enhancing Cellular Uptake of Coenzyme Q10

The mucoadhesive nanoparticles (NPs) for oral delivery of coenzyme Q10 (CoQ10) were prepared using natural mucoadhesive polysaccharides, chitosan (CS), and dextran sulfate sodium salt (DS) in order to improve the solubility, cellular uptake, and thermo- and photostability of CoQ10. CoQ10-loaded NPs were prepared in the range of 340-450 nm with an entrapment efficiency of 60-98%. The mucoadhesiveness and cellular uptake of NPs were evaluated by measuring the amount of mucin adsorbed on NPs and CoQ10 absorbed in Caco-2 cells, respectively. CS/DS NPs had higher mucoadhesive strength than CS/sodium triphosphate pentabasic NPs (control group). Moreover, the solubility, cellular uptake, thermo- and photostability of CS/DS NPs were significantly improved compared with non-nanoencapsulated free CoQ10. Particularly, CS/DS NPs prepared with 0.5 mg/mL of CS and DS produced the highest mucoadhesiveness, solubility, cellular uptake, and cellular antioxidant activity. Thus, mucoadhesive CS/DS NPs may be an effective oral delivery platform for improving bioavailability of CoQ10.

Chitosan microencapsulation of the dispersed phase of an O/W nanoemulsion to hydrochlorothiazide delivery

In view of biopharmaceutical limitations of hydrochlorothiazide (HCTZ), Trojan-type mucoadhesive systems were proposed, aiming to improve HCTZ pharmacological properties by modulating its release. Nanoemulsions were formed spontaneously by combining medium-chain triglycerides (Lipoid^® S75 and Pluronic^® F68) and high encapsulation efficiency was obtained. The mucoadhesive properties were provided by chitosan and microencapsulation of nanoemulsions in spray-dryer was successfully achieved by using Aerosil^® as wall material. The rapid redispersion of nanoemulsion in simulated fluids led to a fast and complete release of HCTZ in gastric medium. The pharmacodynamics of HCTZ was improved, extending the diuretic activity. Once a simple and low-energy method contributed to obtain stable mucoadhesive nanoemulsions, advantages in terms of production could also be achieved, allowing easy scaling up. This novel mucoadhesive Trojan particulate system of HCTZ showed to be a promising approach to overcome limitations in terms of absorption and consequently improve the therapeutic efficacy.

Uncovering Potential Applications of Cyanobacteria and Algal Metabolites in Biology, Agriculture and Medicine: Current Status and Future Prospects

Cyanobacteria and algae having complex photosynthetic systems can channelize absorbed solar energy into other forms of energy for production of food and metabolites. In addition, they are promising biocatalysts and can be used in the field of "white biotechnology" for enhancing the sustainable production of food, metabolites, and green energy sources such as biodiesel. In this review, an endeavor has been made to uncover the significance of various metabolites like phenolics, phytoene/terpenoids, phytols, sterols, free fatty acids, photoprotective compounds (MAAs, scytonemin, carotenoids, polysaccharides, halogenated compounds, etc.), phytohormones, cyanotoxins, biocides (algaecides, herbicides, and insecticides) etc. Apart from this, the importance of these metabolites as antibiotics, immunosuppressant, anticancer, antiviral, anti-inflammatory agent has also been discussed. Metabolites obtained from cyanobacteria and algae have several biotechnological, industrial, pharmaceutical, and cosmetic uses which have also been discussed in this review along with the emerging technology of their harvesting for enhancing the production of compounds like bioethanol, biofuel etc. at commercial level. In later sections, we have discussed genetically modified organisms and metabolite production from them. We have also briefly discussed the concept of bioprocessing highlighting the functioning of companies engaged in metabolites production as well as their cost effectiveness and challenges that are being addressed by these companies.

Preparation and Characterization of Mucoadhesive Buccal Nanoparticles Using Chitosan and Dextran Sulfate

The aim of this study was to formulate buccal mucoadhesive nanoparticles (NPs) using the natural mucoadhesive polymers. The natural mucoadhesive polymers chitosan (CS) and dextran sulfate sodium salt (DS) were used to prepare mucoadhesive NPs using the ionic gelation method. As the molecular weight of DS decreased, the amount of mucin and the number of buccal cells adsorbed on DS increased. The CS/DS NPs ranged from 100 to 200 nm in diameter. The adhesive interactions of CS/DS NPs with mucin were not significantly different from those of CS/sodium triphosphate pentabasic (TPP) NPs; however, CS/DS NPs exhibited 5 times greater mucoadhesive activity to buccal cells compared to control CS/TPP NPs in ex vivo adhesion tests. These results indicate that the buccal mucoadhesive properties of NPs can be improved using natural mucoadhesive polymers.

Recent Trends in Therapeutic Approaches for Diabetes Management: A Comprehensive Update

Diabetes highlights a growing epidemic imposing serious social economic crisis to the countries around the globe. Despite scientific breakthroughs, better healthcare facilities, and improved literacy rate, the disease continues to burden several sections, especially middle and low income countries. The present trends indicate the rise in premature death, posing a major threat to global development. Scientific and technological advances have witnessed the development of newer generation of drugs like sulphonylureas, biguanides, alpha glucosidase inhibitors, and thiazolidinediones with significant efficacy in reducing hyperglycemia. Recent approaches in drug discovery have contributed to the development of new class of therapeutics like Incretin mimetics, Amylin analogues, GIP analogs, Peroxisome proliferator activated receptors, and dipeptidyl peptidase-4 inhibitor as targets for potential drugs in diabetes treatment. Subsequently, the identification and clinical investigation of bioactive substances from plants have revolutionized the research on drug discovery and lead identification for diabetes management. With a focus on the emerging trends, the review article explores the current statistical prevalence of the disease, discussing the benefits and limitations of the commercially available drugs. Additionally, the critical areas in clinical diabetology are discussed, with respect to prospects of statins, nanotechnology, and stem cell technology as next generation therapeutics and why the herbal formulations are consistently popular choice for diabetes medication and management.

Marker-ion analysis for quantification of mucoadhesivity of microparticles in particle-retention assays

The objective of the present work was to develop an improved method to quantify particle retention on mucosal tissue under dynamic flow conditions with simultaneous determination of drug dissolution. The principle was to dissolve the collected inert carrier material and quantify specific marker ions by reliable analytical methods. The mucoadhesive model particles consisted of drug-loaded porous calcium carbonate microcarriers coated with chitosan, and quantification of calcium ions by capillary electrophoresis enabled to determine particle-retention kinetics on colonic mucosal tissue. The method was validated by image analysis, and the particle-retention assay was successfully applied to granulate material (125-250 mm) and small particles (<90 μm) with mucoadhesive properties. Particle retention on colonic mucosa was improved by increasing the chitosan content, demonstrating the sensitivity and usefulness of marker-ion analysis for quantification of detached particles. Furthermore, we showed that drug dissolution from mucoadhesive microparticles followed comparable kinetics in the particle-retention assay and the standard USP IV method. Our findings are helpful for the development of micro-sized colonic drug delivery systems, in particular for optimization of mucoadhesive properties and sustained drug release kinetics of porous drug carriers.

Mucoadhesive films containing chitosan-coated nanoparticles: a new strategy for buccal curcumin release

Mucoadhesive films containing curcumin-loaded nanoparticles were developed, aiming to prolong the residence time of the dosage form in the oral cavity and to increase drug absorption through the buccal mucosa. Films were prepared by the casting method after incorporation of curcumin-loaded chitosan-coated polycaprolactone nanoparticles into plasticized chitosan solutions. Different molar masses of mucoadhesive polysaccharide chitosan and concentrations of plasticizer glycerol were used to optimize the preparation conditions. Films obtained using medium and high molar mass chitosan were found to be homogeneous and flexible. Curcumin-loaded nanoparticles were uniformly distributed on the film surface, as evidenced by atomic force microscopy and high-resolution field-emission gun scanning electron microscopy (FEG-SEM) images. Analyses of film cross sections using FEG-SEM demonstrate the presence of nanoparticles inside the films. In addition, films proved to have a good rate of hydration in simulated saliva solution, displaying a maximum swelling of around 80% and in vitro prolonged-controlled delivery of curcumin. These results indicate that the mucoadhesive films containing nanoparticles offer a promising approach for buccal delivery of curcumin, which may be particularly useful in the treatment of periodontal diseases that require a sustained drug delivery.

Therapeutic applications of hydrogels in oral drug delivery

INTRODUCTION

Oral delivery of therapeutics, particularly protein-based pharmaceutics, is of great interest for safe and controlled drug delivery for patients. Hydrogels offer excellent potential as oral therapeutic systems due to inherent biocompatibility, diversity of both natural and synthetic material options and tunable properties. In particular, stimuli-responsive hydrogels exploit physiological changes along the intestinal tract to achieve site-specific, controlled release of protein, peptide and chemotherapeutic molecules for both local and systemic treatment applications.

AREAS COVERED

This review provides a wide perspective on the therapeutic use of hydrogels in oral delivery systems. General features and advantages of hydrogels are addressed, with more considerable focus on stimuli-responsive systems that respond to pH or enzymatic changes in the gastrointestinal environment to achieve controlled drug release. Specific examples of therapeutics are given. Last, in vitro and in vivo methods to evaluate hydrogel performance are discussed.

EXPERT OPINION

Hydrogels are excellent candidates for oral drug delivery, due to the number of adaptable parameters that enable controlled delivery of diverse therapeutic molecules. However, further work is required to more accurately simulate physiological conditions and enhance performance, which is important to achieve improved bioavailability and increase commercial interest.

Nanostructured mucoadhesive microparticles for enhanced preocular retention

We describe nanostructured microparticles (NMs) containing a mucoadhesive polymer for enhanced preocular retention and consider them as potential carriers of drugs to the eye. These NMs are each composed of entangled nanofibers to give an enlarged specific surface area, and thus can better adhere to the preocular mucus surface. This physical design allows the microparticles still to be composed mainly of a wall material, poly(lactic-co-glycolic acid), as required for controlled drug delivery, while the effects of an additive, mucoadhesive material, polyethylene glycol, can be synergistically improved via the nanostructured morphology. Thus, when formulated in a dry tablet dosage form, the NMs in this work show more than a 10-fold increase in preocular retention in vivo compared to conventional spherical microparticles. Therefore, we conclude that these mucoadhesive NMs can reside on the preocular surface for a prolonged period, and thus appear to be a promising system for topical drug delivery to the eye.

Sildenafil citrate in the treatment of pain in primary dysmenorrhea: a randomized controlled trial

STUDY QUESTION

Is a vaginal preparation of sildenafil citrate capable of alleviating acute menstrual pain in patients with primary dysmenorrhea (PD)?

SUMMARY ANSWER

A vaginal preparation of sildenafil citrate is capable of alleviating acute menstrual pain in patients with PD with no observed adverse effects.

WHAT IS KNOWN ALREADY

Oral preparations of nitric oxide (NO) donor drugs augment relaxant effects of NO on myometrial cells, reverse the vasoconstriction caused by prostaglandins and successfully alleviate pain, but the incidence of side effects is too high for routine clinical use. Sildenafil citrate inhibits type 5-specific phosphodiesterase (PDE5), thus preventing the degradation of cyclic guanosine monophosphate (cGMP) in the muscle and augmenting the vasodilatory effects of NO. Therefore, by inhibiting PDE5, the tissue remains relaxed and more blood can circulate through. It has been used previously in a vaginal form with no observed side effects, and it enhances endometrial blood flow.

STUDY DESIGN, SIZE, DURATION

A double-blind, randomized, controlled trial comparing vaginal preparation of sildenafil citrate (100 mg single dose) to a placebo in 62 PD patients at the time of painful menstruation was conducted. The primary outcome was total pain relief over 4 consecutive hours (TOPAR4) comparing sildenafil citrate to placebo, where higher TOPAR4 scores represent better pain relief. Secondary outcomes were pain relief as measured by the visual analog scale (VAS) and uterine artery pulsatility index (PI). Subjects were recruited from December 2007 to January 2011. The trial was stopped due to closeout of the funding for the study.

PARTICIPANTS, SETTINGS, METHODS

Participants were women in good health, were aged 18-35 years and suffered from moderate to severe PD. They were randomized to either vaginal placebo or 100 mg vaginal sildenafil citrate in a 1:1 ratio using random permuted blocks having a block size of 4. At baseline and 1, 2, 3, and 4 h post-treatment, patients were asked to provide assessment of their degree of pain using two scales: (i) pain on the 5-level ordinal scale used for TOPAR4 calculation and (ii) pain level on the VAS. The study ended 4 h after treatment initiation.

MAIN RESULTS AND THE ROLE OF CHANCE

Twenty-five subjects completed the study. Using the TOPAR4 score, the sildenafil citrate group had significantly better pain relief compared with the placebo group [mean (SD): 11.9 (3.2) versus 6.4 (2.1), respectively; difference in means = 5.3; 95% CI: (2.9,7.6); P < 0.001)]. On the VAS, sildenafil citrate provided better pain relief than placebo at each time point. At the 2-h time point, the PI was significantly lower in the sildenafil citrate group compared with the placebo group [mean (SD): 1.6 (0.6) versus 2.3 (0.5), respectively; difference in means = -0.7; 95% CI: (-1.2, -0.1); P = 0.01)].

LIMITATIONS, REASONS FOR CAUTION

Since we did not meet our sample size due to the loss of funding and could not confirm our primary hypothesis, larger studies of longer duration, likely multi-center, are needed to confirm the findings from this study.

WIDER IMPLICATIONS OF THE FINDINGS

A number of medications have been investigated to improve the treatment options for PD, but most have proven unsuccessful or to have an unfavorable risk/benefit ratio. Since PD is a condition that most women suffer from and seek treatment for at some point in their lives, our study offers hope that vaginal sildenafil citrate is a safe and effective option for patients who do not desire or are unresponsive to treatments now available on the market.

STUDY FUNDING/COMPETING INTERESTS

Funding for this study was provided by National Institutes of Health (NIH) grants RO3 TW007438 and K24 HD01476. The authors report no relevant conflicts of interest.

TRIAL REGISTRATION NUMBER

NCT00123162 (Clinical trials.gov).

Gastroretentive hydrodynamically balanced systems of ofloxacin: In vitro evaluation

Hydrodynamically balanced systems (HBSs) of ofloxacin were prepared using lactose, HPMC K4M, PVP K 30, and liquid paraffin, which may increase the mean residence time in the gastrointestinal tract, and may be able to provide maximum drug at the site of absorption to improve oral bioavailability. All these formulated HBS capsules were floated well over 6 h with no floating lag time. They also showed sustained drug release over 6 h. Time for 50% release of ofloxacin was within the range, 2.47 ± 0.02 to 3.07 ± 0.08 h. The in vitro drug release from these HBS capsules was dependent on HPMC K4M, PVP K 30, and liquid paraffin content. The drug release pattern of these HBS capsules containing ofloxacin followed the Higuchi model with the anomalous transport mechanism.

Preparation and evaluation of mucoadhesive cefdinir microcapsules

The mucoadhesive microcapsules were prepared by using various concentrations of three different mucoadhesive polymers, namely, chitosan, Carbopol 934P, and methyl cellulose as wall materials and cefdinir as the core material employing orificeionic gelation method. The prepared microcapsules were characterized by scanning electron microscope (SEM) and Fourier transform infrared spectrometry (FT-IR). The prepared microcapsules were found to be spherical with particle size ranging from 765±20 to 985±10 μm and encapsulation efficiencies in the range of 55%-92%. The formulation containing Carbopol 934P as mucoadhesive polymer was found to be best with particle size 946±10 μm. The ex vivo wash-off test showed that the mucoadhesion after 1 h was 80% and the in vitro drug release was extended for more than 12 h. FT-IR spectra indicate that there was no interaction between drug and the polymers used in the formulation. Cefdinir is better absorbed from the upper part of the gastrointestinal tract, it suffers from low oral bioavailability (20-30%), shorter biological half-life (1-2 h), and less transit time. Thus, it can be concluded that microcapsules prepared using Carbopol 934P have promising properties for use as mucoadhesive carrier to increase the residence time of cefdinir.

Optimization and characterization of gastroretentive floating drug delivery system using Box-Behnken design

CONTEXT

One among many strategies to prolong gastric residence time and improve local effect of the metronidazole in stomach to eradicate Helicobacter pylori in the treatment of peptic ulcer was floating drug delivery system particularly effervescent gastroretentive tablets.

OBJECTIVE

The objective of this study was to prepare and evaluate, effervescent floating drug delivery system of a model drug, metronidazole.

METHODS

Effervescent floating drug delivery tablets were prepared by wet granulation method. A three-factor, three levels Box-Behnken design was adopted for the optimization. The selected independent variables were amount of hydroxypropyl methylcellulose K 15M (X1), sodium carboxy methylcellulose (X2) and NaHCO3 (X3). The dependent variables were floating lag time (YFLT), cumulative percentage of metronidazole released at 6th h (Y6) and cumulative percentage of metronidazole released at 12th h (Y12). Physical properties, drug content, in vitro floating lag time, total floating time and drug release behavior were assessed.

RESULTS

YFLT range was found to be from 1.02 to 12.07 min. The ranges of other responses, Y6 and Y12 were 25.72 ± 2.85 to 77.14 ± 3.42 % and 65.47 ± 1.25 to 99.65 ± 2.28 %, respectively. Stability studies revealed that no significant change in in vitro floating lag time, total floating time and drug release behavior before and after storage.

CONCLUSION

It can be concluded that a combination of hydroxypropyl methylcellulose K 15M, sodium carboxy methylcellulose and NaHCO3 can be used to increase the gastric residence time of the dosage form to improve local effect of metronidazole.

Development, optimization, and anti-diabetic activity of gliclazide-loaded alginate-methyl cellulose mucoadhesive microcapsules

The purpose of this work was to develop and optimize gliclazide-loaded alginate-methyl cellulose mucoadhesive microcapsules by ionotropic gelation using central composite design. The effect of formulation parameters like polymer blend ratio and cross-linker (CaCl(2)) concentration on properties of gliclazide-loaded alginate-methyl cellulose microcapsules like drug encapsulation efficiency and drug release were optimized. The optimized microcapsules were subjected to swelling, mucoadhesive, and in vivo studies. The observed responses coincided well with the predicted values from the optimization technique. The optimized microcapsules showed high drug encapsulation efficiency (83.57 ± 2.59% to 85.52 ± 3.07%) with low T(50%) (time for 50% drug release, 5.68 ± 0.09 to 5.83 ± 0.11 h). The in vitro drug release pattern from optimized microcapsules was found to be controlled-release pattern (zero order) with case II transport release mechanism. Particle sizes of these optimized microcapsules were 0.767 ± 0.085 to 0.937 ± 0.086 mm. These microcapsules also exhibited good mucoadhesive properties. The in vivo studies on alloxan-induced diabetic rats indicated the significant hypoglycemic effect that was observed 12 h after oral administration of optimized mucoadhesive microcapsules. The developed and optimized alginate-methyl cellulose microcapsules are suitable for prolonged systemic absorption of gliclazide to maintain lower blood glucose level and improved patient compliance.

Preparation and characterization of a coacervate extended-release microparticulate delivery system for Lactobacillus rhamnosus

BACKGROUND

The purpose of this study was to develop a mucoadhesive coacervate microparticulate system to deliver viable Lactobacillus rhamnosus cells into the gut for an extended period of time while maintaining high numbers of viable cells within the formulation throughout its shelf-life and during gastrointestinal transit.

METHODS

Core coacervate mucoadhesive microparticles of L. rhamnosus were developed using several grades of hypromellose and were subsequently enteric-coated with hypromellose phthalate. Microparticles were evaluated for percent yield, entrapment efficiency, surface morphology, particle size, size distribution, zeta potential, flow properties, in vitro swelling, mucoadhesion properties, in vitro release profile and release kinetics, in vivo probiotic activity, and stability. The values for the kinetic constant and release exponent of model-dependent approaches, the difference factor, similarity factor, and Rescigno indices of model-independent approaches were determined for analyzing in vitro dissolution profiles.

RESULTS

Experimental microparticles of formulation batches were of spherical shape with percent yields of 41.24%-58.18%, entrapment efficiency 45.18%-64.16%, mean particle size 33.10-49.62 μm, and zeta potential around -11.5 mV, confirming adequate stability of L. rhamnosus at room temperature. The in vitro L. rhamnosus release profile follows zero-order kinetics and depends on the grade of hypromellose and the L. rhamnosus to hypromellose ratio.

CONCLUSION

Microparticles delivered L. rhamnosus in simulated intestinal conditions for an extended period, following zero-order kinetics, and exhibited appreciable mucoadhesion in simulated intestinal conditions.

Gastroretentive microparticles for drug delivery applications

Many strategies have been proposed to explore the possibility of exploiting gastroretention for drug delivery. Such systems would be useful for local delivery, for drugs that are poorly soluble at higher pH or primarily absorbed from the proximal small intestine. Generally, the requirements of such strategies are that the vehicle maintains controlled drug release and exhibits prolonged residence time in the stomach. Despite widespread reporting of technologies, many have an inherent drawback of variability in transit times. Microparticulate systems, capable of distributing widely through the gastrointestinal tract, can potentially minimise this variation. While being retained in the stomach, the drug content is released slowly at a desired rate, resulting in reduced fluctuations in drug levels. This review summarises the promising role of microencapsulation in this field, exploring both floating and mucoadhesive microparticles and their application in the treatment of Helicobacter pylori, highlighting the clinical potential of eradication of this widespread infection.