In Planta production of immunogenic poliovirus peptide using tobacco mosaic virus-based vector system

Establishment of the Daucus carota SMC-1 Cell Suspension Line for Poliovirus Vaccine Development

The development of virus-free, oral vaccines against poliovirus capable of inducing mucosal protective immunity is needed to safely combat this pathogen. In the present study, a carrot cell line expressing the poliovirus VP2 antigen was established at the level of callus and cell suspensions, exploring the effects of culture media (MS and B5), supplementation with urea, phytoregulators (2,4-D : KIN), and light conditions (continuous light, photoperiod, and total darkness). The best callus growth was obtained on B5 medium supplemented with 2 mg/L of 2,4-D + 2 mg/L kinetin and 0.0136 g/L of urea and in continuous light conditions. Suspension cultures of the SMC-1 line in 250 mL Erlenmeyer flasks had a maximum growth of 16.07 ± 0.03 g/L DW on day 12 with a growth rate of µ=0.3/d and a doubling time of 2.3 days. In a 2 L airlift bioreactor, the biomass yield achieved was 25.6 ± 0.05 g/L DW at day 10 with a growth rate of µ= 0.58/d and doubling time of 1.38 d. Cell growth was 1.5 times higher in bioreactors than in shake flasks, highlighting that both systems resulted in the accumulation of VP2 throughout the time in culture. The maximum VP2 yield in flasks was 387.8 µg/g DW at day 21, while in the reactor it was 550.2 µg/g DW at day 18. In conclusion, bioreactor-based production of the VP2 protein by the SMC-1 suspension cell line offers a higher productivity when compared to flask cultures, offering a key perspective to produce low-cost vaccines against poliomyelitis.

Plant-made poliovirus vaccines - Safe alternatives for global vaccination

Human polioviruses are highly infectious viruses that are spread mainly through the fecal-oral route. Infection of the central nervous system frequently results in irreversible paralysis, a disease called poliomyelitis. Children under five years are mainly affected if they have not acquired immunity through natural infection or via vaccination. Current polio vaccines comprise the injectable inactivated polio vaccine (IPV, also called the Salk vaccine) and the live-attenuated oral polio vaccine (OPV, also called the Sabin vaccine). The main limitations of the IPV are the reduced protection at the intestinal mucosa, the site of virus replication, and the high costs for manufacturing due to use of live viruses. While the OPV is more effective and stimulates mucosal immunity, it is manufactured using live-attenuated strains that can revert into pathogenic viruses resulting in major safety concerns and vaccine-derived outbreaks. During the last fifteen years, plant-based poliovirus vaccines have been explored by several groups as a safe and low-cost alternative, and promising results in protection against challenges with viruses and induction of neutralizing antibodies have been obtained. However, low yields and a high frequency in dose administration highlight the need for improvements in polioviral antigen production. In this review, we provide insights into recent efforts to develop plant-made poliovirus candidates, with an emphasis on strategies to optimize the production of viral antigens.

Expression of immunogenic poliovirus Sabin type 1 VP proteins in transgenic tobacco

One of the milestones of vaccinology is the depletion of the global impact of Poliomyelitis. The current vaccines to deal with Polio comprise the Sabin and Salk formulations. The main limitation of the former is the use of attenuated viruses that can revert into pathogenic forms, whereas the latter is more expensive and induces no protection in the intestinal tract; the site of virus replication. Genetically engineered plants cope with such limitations. In addition, they offer a low-cost alternative for production, storage and delivery of vaccines. This technology has been narrowly applied in the development of Polio vaccines. Herein, we explored the ability of tobacco cells to express the immunogenic VP1, VP2, VP3, and VP4 Polio antigens, which are relevant for vaccine development. Evidence on the expression of the plant-made Polio VPs is presented and an immunogenicity assessment proved their capacity to induce local and systemic humoral responses when administered by subcutaneous and oral routes. The plant-made VPs will be useful in the development of low-cost vaccine formulations able to induce effective mucosal immunity without the risks associated to the use of attenuated viruses; therefore there is a potential for this technology to contribute toward Polio eradication.

The potential of plant-made vaccines to fight picornavirus

INTRODUCTION

Several Picornaviruses are pathogens that generate serious problems for human and animal health worldwide. Vaccination is an attractive approach to fight against picornaviruses. In this regard, the development of low-cost vaccines is a priority to ensure coverage; especially in developing and low-income countries. In this context, plant-made vaccines are a convenient technology since plant cells are low-cost bioreactors capable of producing complex antigens that preserve their antigenic determinants; moreover, they can serve as biocapsules to achieve oral delivery.

AREAS COVERED

In the present review the advances in the development of plant-made vaccines against picornaviruses are summarized and placed in perspective. The main diseases that have been targeted using this approach include Poliovirus, Food and mouth disease virus, Hepatitis A virus, and Enterovirus 71.

EXPERT OPINION

Several vaccine candidates against picornavirus have been characterized at the preclinical level; with many of them capable of inducing humoral and cellular responses that led to neutralization of pathogens when evaluated in vitro and test animal challenge assays. Plant-made vaccines are a promise to fight picornaviruses; especially in the developing world where limited resources hamper vaccination coverage. A critical analysis of the road ahead for this technology is provided.

The Impact of Aspect Ratio on the Biodistribution and Tumor Homing of Rigid Soft-Matter Nanorods

The size and shape of nanocarriers can affect their fate in vivo, but little is known about the effect of nanocarrier aspect ratio on biodistribution in the setting of cancer imaging and drug delivery. The production of nanoscale anisotropic materials is a technical challenge. A unique biotemplating approach based on of rod-shaped nucleoprotein nanoparticles with predetermined aspect ratios (AR 3.5, 7, and 16.5) is used. These rigid, soft-matter nanoassemblies are derived from tobacco mosaic virus (TMV) components. The role of nanoparticle aspect ratio is investigated, while keeping the surface chemistries constant, using either PEGylated stealth nanoparticles or receptor-targeted RGD-displaying formulations. Aspect ratio has a profound impact on the behavior of the nanoparticles in vivo and in vitro. PEGylated nanorods with the lowest aspect ratio (AR 3.5) achieve the most efficient passive tumor-homing behavior because they can diffuse most easily, whereas RGD-labeled particles with a medium aspect ratio (AR 7) are more efficient at tumor targeting because this requires a balance between infusibility and ligand-receptor interactions. The in vivo behavior of nanoparticles can therefore be tailored to control biodistribution, longevity, and tumor penetration by modulating a single parameter: the aspect ratio of the nanocarrier.

Simplified methods for the construction of RNA and DNA virus infectious clones

Infectious virus clones are one of the most powerful tools in plant pathology, molecular biology, and biotechnology. The construction of infectious clones of RNA and DNA viruses, however, usually requires laborious cloning and subcloning steps. In addition, instability of the RNA virus genome is frequently reported after its introduction into the vector and transference to Escherichia coli. These difficulties hamper the cloning procedures, making it tedious and cumbersome. This chapter describes two protocols for a simple construction of infectious viruses, an RNA virus, the tobamovirus Pepper mild mottle virus, and a DNA virus, a bipartite begomovirus. For this purpose, the strategy of overlap-extension PCR was used for the construction of infectious tobamovirus clone and of rolling circle amplification (RCA) for the construction of a dimeric form of the begomovirus clone.

Dual-modal magnetic resonance and fluorescence imaging of atherosclerotic plaques in vivo using VCAM-1 targeted tobacco mosaic virus

The underlying cause of major cardiovascular events, such as myocardial infarctions and strokes, is atherosclerosis. For accurate diagnosis of this inflammatory disease, molecular imaging is required. Toward this goal, we sought to develop a nanoparticle-based, high aspect ratio, molecularly targeted magnetic resonance (MR) imaging contrast agent. Specifically, we engineered the plant viral nanoparticle platform tobacco mosaic virus (TMV) to target vascular cell adhesion molecule (VCAM)-1, which is highly expressed on activated endothelial cells at atherosclerotic plaques. To achieve dual optical and MR imaging in an atherosclerotic ApoE(-/-) mouse model, TMV was modified to carry near-infrared dyes and chelated Gd ions. Our results indicate molecular targeting of atherosclerotic plaques. On the basis of the multivalency and multifunctionality, the targeted TMV-based MR probe increased the detection limit significantly; the injected dose of Gd ions could be further reduced 400x compared to the suggested clinical use, demonstrating the utility of targeted nanoparticle cargo delivery.

A simplified approach to construct infectious cDNA clones of a tobamovirus in a binary vector

Infectious cDNA clones of RNA viruses are important tools to study molecular processes such as replication and host-virus interactions. However, the cloning steps necessary for construction of cDNAs of viral RNA genomes in binary vectors are generally laborious. In this study, a simplified method of producing an agro-infectious Pepper mild mottle virus (PMMoV) clone is described in detail. Initially, the complete genome of PMMoV was amplified by a single-step RT-PCR, cloned, and subcloned into a small plasmid vector under the T7 RNA polymerase promoter to confirm the infectivity of the cDNA clone through transcript inoculation. The complete genome was then transferred to a binary vector using a single-step, overlap-extension PCR. The selected clones were agro-infiltrated to Nicotiana benthamiana plants and showed to be infectious, causing typical PMMoV symptoms. No differences in host responses were observed when the wild-type PMMoV isolate, the T7 RNA polymerase-derived transcripts and the agroinfiltration-derived viruses were inoculated to N. benthamiana, Capsicum chinense PI 159236 and Capsicum annuum plants.

Tobacco mosaic virus in the lungs of mice following intra-tracheal inoculation

Plant viruses are generally considered incapable of infecting vertebrates. Accordingly, they are not considered harmful for humans. However, a few studies questioned the certainty of this paradigm. Tobacco mosaic virus (TMV) RNA has been detected in human samples and TMV RNA translation has been described in animal cells. We sought to determine if TMV is detectable, persists, and remains viable in the lung tissues of mice following intratracheal inoculation, and we attempted to inoculate mouse macrophages with TMV. In the animal model, mice were intratracheally inoculated with 10(11) viral particles and were sacrificed at different time points. The virus was detected in the mouse lungs using immunohistochemistry, electron microscopy, real-time RT-PCR and sequencing, and its viability was studied with an infectivity assay on plants. In the cellular model, the culture medium of murine bone marrow derived macrophages (BMDM) was inoculated with different concentrations of TMV, and the virus was detected with real-time RT-PCR and immunofluorescence. In addition, anti-TMV antibodies were detected in mouse sera with ELISA. We showed that infectious TMV could enter and persist in mouse lungs via the intratracheal route. Over 14 days, the TMV RNA level decreased by 5 log(10) copies/ml in the mouse lungs and by 3.5 log(10) in macrophages recovered from bronchoalveolar lavage. TMV was localized to lung tissue, and its infectivity was observed on plants until 3 days after inoculation. In addition, anti-TMV antibody seroconversions were observed in the sera from mice 7 days after inoculation. In the cellular model, we observed that TMV persisted over 15 days after inoculation and it was visualized in the cytoplasm of the BMDM. This work shows that a plant virus, Tobacco mosaic virus, could persist and enter in cells in mammals, which raises questions about the potential interactions between TMV and human hosts.

[Current status in the commercialization and application of genetically modified plants and their effects on human and livestock health and phytoremediation]

Developments in the use of genetically modified plants for human and livestock health and phytoremediation were surveyed using information retrieved from Entrez PubMed, Chemical Abstracts Service, Google, congress abstracts and proceedings of related scientific societies, scientific journals, etc. Information obtained was classified into 8 categories according to the research objective and the usage of the transgenic plants as 1: nutraceuticals (functional foods), 2: oral vaccines, 3: edible curatives, 4: vaccine antigens, 5: therapeutic antibodies, 6: curatives, 7: diagnostic agents and reagents, and 8: phytoremediation. In total, 405 cases were collected from 2006 to 2010. The numbers of cases were 120 for nutraceuticals, 65 for oral vaccines, 25 for edible curatives, 36 for vaccine antigens, 36 for therapeutic antibodies, 76 for curatives, 15 for diagnostic agents and reagents, and 40 for phytoremediation (sum of each cases was 413 because some reports were related to several categories). Nutraceuticals, oral vaccines and curatives were predominant. The most frequently used edible crop was rice (51 cases), and tomato (28 cases), lettuce (22 cases), potato (18 cases), corn (15 cases) followed.

Trastuzumab-binding peptide display by Tobacco mosaic virus

Human epidermal growth factor receptor-2 (HER2/neu) is a target for the humanized monoclonal antibody trastuzumab. Recently, trastuzumab-binding peptides (TBP) of HER2/neu that inhibit proliferation of breast cancer cells were identified. We have now studied conditions of efficient assembly in vivo of Tobacco mosaic virus (TMV)-based particles displaying TBP on its surface. The system is based on an Agrobacterium-mediated co-delivery of binary vectors encoding TMV RNA and coat protein (CP) with TBP in its C-terminal extension into plant leaves. We show how the fusion of amino acid substituted TBP (sTBP) to CP via a flexible peptide linker can improve the manufacturability of recombinant TMV (rTMV). We also reveal that rTMV particles with exposed sTBP retained trastuzumab-binding capacity but lost an anti-HER2/neu immunogenic scaffold function. Mouse antibodies against rTMV did not recognize HER2/neu on surface of human SK-BR-3 cells.

Insertion in the coding region of the movement protein improves stability of the plasmid encoding a tomato mosaic virus-based expression vector

A major obstacle in the genetic manipulation of tomato mosaic virus (ToMV) is the instability of the plasmid containing the infectious full-length cDNA of the ToMV vector, which often prevents the subcloning of a foreign gene of interest into the vector. We found that an insertion of a 0.3-1.6-kbp DNA fragment in the movement protein (MP) coding region effectively attenuated bacterial toxicity of the plasmid and greatly increased plasmid yield. Accumulation of a modified ToMV containing a 0.3-kb insertion in the MP coding region was comparable to that of a modified ToMV without an insertion in tobacco BY-2 protoplasts, while an insertion more than 0.6 kb significantly reduced accumulation of the viral RNA. The modified ToMV vector containing a 0.3-kb insertion was easily manipulated to introduce a coding sequence for human interferon-gamma (HuIFN-gamma) and successfully utilized to produce HuIFN-gamma in both BY-2 protoplasts and transgenic BY-2 cells.

Production of dengue 2 envelope domain III in plant using TMV-based vector system

The envelope protein of dengue virus is the major protein involved in host cell receptor binding for viral entry and induction of immunity. A gene fragment encoding domain III of the dengue 2 envelope protein (D2EIII, amino acids 298-400) was successfully expressed in Nicotinana benthamiana plant using a tobacco mosaic virus (TMV)-based transient expression system. The N-terminal 5' untranslated region-omega sequence located upstream of D2EIII increased protein production in infected plant tissues. The recombinant protein was reactive with anti-D2EIII polyclonal and anti-His tag antibodies. The intramuscular immunization of mice with D2EIII induced the production of the anti-dengue virus antibody. The induced antibody demonstrated neutralizing activity against dengue type 2 virus. The result indicates that the TMV expression system produces the dengue virus antigen in plant, which possesses appropriate antigenicity and immunogenicity.

Short monolithic columns—A breakthrough in purification and fast quantification of tomato mosaic virus

Drawbacks of conventional virus purification methods have led to the development of new, mostly chromatography-based methods. Short monolithic columns are stationary phases intended for purification of large molecules. In this work efficient chromatographic purification of tomato mosaic virus (ToMV) from plant material is described. Based on short monolithic column, the purification process was shortened from 5 days to 2 hours. High viral purity was achieved and recovery of chromatographic step was up to 90%. In addition, these columns enabled preliminary quantification of the virus in just a few minutes, much faster than other quantification methods (e.g. enzyme-linked immunosorbent assay or real-time polymerase chain reaction) which take 1-2 days. These results demonstrate the potential of short monolith column technology for purification and analysis of different viruses.