Functional analysis of the chitin-binding domain of a family 19 chitinase from Streptomyces griseus HUT6037: substrate-binding affinity and cis-dominant increase of antifungal function

Bioconversion of α-Chitin by a Lytic Polysaccharide Monooxygenase OsLPMO10A Coupled with Chitinases and the Synergistic Mechanism Analysis

The whole enzymatic conversion of chitin is a green and promising alternative to current strategies, which are based on lytic polysaccharide monooxygenases (LPMOs) and chitinases. However, the lack of LPMOs with high activity toward α-chitin limits the efficient bioconversion of α-chitin. Herein, we characterized a high chitin-active LPMO from Oceanobacillus sp. J11TS1 (OsLPMO10A), which could promote the decrystallization of the α-chitin surface. Furthermore, when coupled with OsLPMO10A, the conversion rate of α-chitin to N-acetyl chitobiose [(GlcNAc)2] by three chitinases (Serratia marcescens, ChiA, -B, and -C) reached 30.86%, which was 2.03-folds that without the addition of OsLPMO10A. Moreover, the results of synergistic reactions indicated that OsLPMO10A and chitinases promoted the degradation of α-chitin each other mainly on the surface. To the best of our knowledge, this study achieved the highest yield of N-acetyl chitooligosaccharides (N-acetyl COSs) among reported LPMOs-driven bioconversion systems, which could be regarded as a promising candidate for α-chitin bioconversion.

Expression and Refolding of the Plant Chitinase From Drosera capensis for Applications as a Sustainable and Integrated Pest Management

Recently, the study of chitinases has become an important target of numerous research projects due to their potential for applications, such as biocontrol pest agents. Plant chitinases from carnivorous plants of the genus Drosera are most aggressive against a wide range of phytopathogens. However, low solubility or insolubility of the target protein hampered application of chitinases as biofungicides. To obtain plant chitinase from carnivorous plants of the genus Drosera in soluble form in E.coli expression strains, three different approaches including dialysis, rapid dilution, and refolding on Ni-NTA agarose to renaturation were tested. The developed « Rapid dilution » protocol with renaturation buffer supplemented by 10% glycerol and 2M arginine in combination with the redox pair of reduced/oxidized glutathione, increased the yield of active soluble protein to 9.5 mg per 1 g of wet biomass. A structure-based removal of free cysteines in the core domain based on homology modeling of the structure was carried out in order to improve the soluble of chitinase. One improved chitinase variant (C191A/C231S/C286T) was identified which shows improved expression and solubility in E. coli expression systems compared to wild type. Computational analyzes of the wild-type and the improved variant revealed overall higher fluctuations of the structure while maintaining a global protein stability. It was shown that free cysteines on the surface of the protein globule which are not involved in the formation of inner disulfide bonds contribute to the insolubility of chitinase from Drosera capensis. The functional characteristics showed that chitinase exhibits high activity against colloidal chitin (360 units/g) and high fungicidal properties of recombinant chitinases against Parastagonospora nodorum. Latter highlights the application of chitinase from D. capensis as a promising enzyme for the control of fungal pathogens in agriculture.

Structural and functional variation of chitin-binding domains of a lytic polysaccharide monooxygenase from Cellvibrio japonicus

Among the extensive repertoire of carbohydrate-active enzymes, lytic polysaccharide monooxygenases (LPMOs) have a key role in recalcitrant biomass degradation. LPMOs are copper-dependent enzymes that catalyze oxidative cleavage of glycosidic bonds in polysaccharides such as cellulose and chitin. Several LPMOs contain carbohydrate-binding modules (CBMs) that are known to promote LPMO efficiency. However, structural and functional properties of some CBMs remain unknown, and it is not clear why some LPMOs, like CjLPMO10A from the soil bacterium Cellvibrio japonicus, have multiple CBMs (CjCBM5 and CjCBM73). Here, we studied substrate binding by these two CBMs to shine light on their functional variation and determined the solution structures of both by NMR, which constitutes the first structure of a member of the CBM73 family. Chitin-binding experiments and molecular dynamics simulations showed that, while both CBMs bind crystalline chitin with K_d values in the micromolar range, CjCBM73 has higher affinity for chitin than CjCBM5. Furthermore, NMR titration experiments showed that CjCBM5 binds soluble chitohexaose, whereas no binding of CjCBM73 to this chitooligosaccharide was detected. These functional differences correlate with distinctly different arrangements of three conserved aromatic amino acids involved in substrate binding. In CjCBM5, these residues show a linear arrangement that seems compatible with the experimentally observed affinity for single chitin chains. On the other hand, the arrangement of these residues in CjCBM73 suggests a wider binding surface that may interact with several chitin chains. Taken together, these results provide insight into natural variation among related chitin-binding CBMs and the possible functional implications of such variation.

Fabrication of silica on chitin in ambient conditions using silicatein fused with a chitin-binding domain

High temperatures, harsh pH conditions, and toxic chemicals involved in the conventional synthesis and coating of silica limit the fabrication of new-generation hybrid materials immobilizing live cells and biomolecules such as enzymes and drugs. This hinders the application of inorganic-organic biohybrid materials in various fields, including bioelectronics, energy generation, and biomedicine. Silicatein, an enzyme found in siliceous sponges, catalyzes the polymerization of silica under mild conditions, that is, at room temperature and neutral pH. Silicatein was fused with a chitin-binding domain (ChBD) to selectively bind the fusion silicatein on the chitin material and with a small soluble tag called InakC, a hydrophilic protein from Pseudomonas syringae, to control the unfavorable aggregation of silicatein. The fusion silicatein was soluble in aqueous media and was successfully found to be adsorbed on the chitin material. The immobilized fusion silicatein acted as an interfacial catalyst to fabricate silica on chitin under ambient conditions. This technique can be used to fabricate inorganic-organic hybrid materials to immobilize biomolecules and can be applied to develop novel biocatalytic systems, biosensors, and tissue culture scaffolds.

Plasmodium chitinases: revisiting a target of transmission-blockade against malaria

Malaria is a life-threatening disease caused by one of the five species of Plasmodium, among which Plasmodium falciparum cause the deadliest form of the disease. Plasmodium species are dependent on a vertebrate host and a blood-sucking insect vector to complete their life cycle. Plasmodium chitinases belonging to the GH18 family are secreted inside the mosquito midgut, during the ookinete stage of the parasite. Chitinases mediate the penetration of parasite through the peritrophic membrane, facilitating access to the gut epithelial layer. In this review, we describe Plasmodium chitinases with special emphasis on chitinases from P. falciparum and P. vivax, the representative examples of the short and long forms of this protein. In addition to the chitinase domain, chitinases belonging to the long form contain a pro-domain and chitin-binding domain. Amino acid sequence alignment of long and short form chitinase domains reveals multiple positions containing variant residues. A subset of these positions was found to be conserved or invariant within long or short forms, indicating the role of these positions in attributing form-specific activity. The reported differences in affinities to allosamidin for P. vivax and P. falciparum were predicted to be due to different residues at two amino acid positions, resulting in altered interactions with the inhibitor. Understanding the role of these amino acids in Plasmodium chitinases will help us elucidate the mechanism of catalysis and the mode of inhibition, which will be the key for identification of potent inhibitors or antibodies demonstrating transmission-blocking activity.

Biotechnological Eminence of Chitinases: A Focus on Thermophilic Enzyme Sources, Production Strategies and Prominent Applications

BACKGROUND

Chitin, the second most abundant polysaccharide in nature, is a constantly valuable and renewable raw material after cellulose. Due to advancement in technology, industrial interest has grown to take advantage of the chitin.

OBJECTIVE

Now, biomass is being treated with diverse microbial enzymes or cells for the production of desired products under best industrial conditions. Glycosidic bonds in chitin structure are degraded by chitinase enzymes, which are characterized into number of glycoside hydrolase (GHs) families.

METHODS

Thermophilic microorganisms are remarkable sources of industrially important thermostable enzymes, having ability to survive harsh industrial processing conditions. Thermostable chitinases have an edge over mesophilic chitinases as they can hydrolyse the substrate at relatively high temperatures and exhibit decreased viscosity, significantly reduced contamination risk, thermal and chemical stability and increased solubility. Various methods are employed to purify the enzyme and increase its yield by optimizing various parameters such as temperature, pH, agitation, and by investigating the effect of different chemicals and metal ions etc. Results: Thermostable chitinase enzymes show high specific activity at elevated temperature which distinguish them from mesophiles. Genetic engineering can be used for further improvement of natural chitinases, and unlimited potential for the production of thermophilic chitinases has been highlighted due to advancement in synthetic biological techniques. Thermostable chitinases are then used in different fields such as bioremediation, medicine, agriculture and pharmaceuticals.

CONCLUSION

This review will provide information about chitinases, biotechnological potential of thermostable enzyme and the methods by which they are being produced and optimized for several industrial applications. Some of the applications of thermostable chitinases have also been briefly described.

Biochemical characterization of a GH19 chitinase from Streptomyces alfalfae and its applications in crystalline chitin conversion and biocontrol

Chitinases play crucial roles in enzymatic conversion of chitin and biocontrol of phytopathogenic fungi. Herein, a chitinase of glycoside hydrolase (GH) family 19, SaChiB, was cloned from Streptomyces alfalfae ACCC 40021 and expressed in Escherichia coli BL21(DE3). The purified SaChiB displayed maximal activities at 45 °C and pH 8.0, and showed good stability up to 55 °C and in the range of pH 4.0-11.0, respectively. It exhibited substrate specificity towards chitin and chitooligosaccharides (degree of polymerization 3-6) with the endo-cleavage manner. In combination with the N-acetyl hexosaminidase SaHEX, it yielded a conversion rate of 95.2% from chitin powder to N-acetyl-D-glucosamine in 8 h and a product purity of >98.5%. Furthermore, the enzyme strongly inhibited the growth of tested pathogenic fungi. These results indicated that SaChiB has the great potential for applications in the conversion of raw chitinous waste in industries as well as the biocontrol of fungal diseases in agriculture.

Effective refolding of a cysteine rich glycoside hydrolase family 19 recombinant chitinase from Streptomyces griseus by reverse dilution and affinity chromatography

Conventional refolding methods are associated with low yields due to misfolding and high aggregation rates or very dilute proteins. In this study, we describe the optimization of the conventional methods of reverse dilution and affinity chromatography for obtaining high yields of a cysteine rich recombinant glycoside hydrolase family 19 chitinase from Streptomyces griseus HUT6037 (SgChiC). SgChiC is a potential biocontrol agent and a reference enzyme in the study and development of chitinases for various applications. The overexpression of SgChiC was previously achieved by periplasmic localization from where it was extracted by osmotic shock and then purified by hydroxyapatite column chromatography. In the present study, the successful refolding and recovery of recombinant SgChiC (r-SgChiC) from inclusion bodies (IB) by reverse dilution and column chromatography methods is respectively described. Approximately 8 mg of r-SgChiC was obtained from each method with specific activities of 28 and 52 U/mg respectively. These yields are comparable to that obtained from a 1 L culture volume of the same protein isolated from the periplasmic space of E. coli BL21 (DE3) as described in previous studies. The higher yields obtained are attributed to the successful suppression of aggregation by a stepwise reduction of denaturant from high, to intermediate, and finally to low concentrations. These methods are straight forward, requiring the use of fewer refolding agents compared with previously described refolding methods. They can be applied to the refolding of other cysteine rich proteins expressed as inclusion bodies to obtain high yields of actively folded proteins. This is the first report on the recovery of actively folded SgChiC from inclusion bodies.

Structure of intact chitinase with hevein domain from the plant Simarouba glauca, known for its traditional anti-inflammatory efficacy

Chitinase from the leaves of Simarouba glauca, a plant used in traditional anti-inflammatory therapy is purified and characterized. Peptide mass finger print analysis revealed the protein as an endo-chitinase which was further confirmed using chitin-agar assay. The enzyme exhibited significant anti-fungal efficacy against phyto-pathogens such as Macrophomina phaseolina, Fusarium oxysporum and Sclerotium rolfsii. Chitinolysis was also examined against insoluble chitin using SEM. Using X-ray diffraction data up to 1.66 Å, the structure was determined by Molecular Replacement using crystal structure of GH19 Chitinase-like protein from Hevea brasiliensis. During structure refinement, an extra domain could be traced and identified as hevein domain. To our knowledge, this is the first report of any chitinase with intact hevein domain. The GH19 chitinase and hevein domains though connected by a lengthy loop, are restricted to be close by disulfide bridges. These bridges connecting each domain with the loop may be important for proper chitin feeding into the active site. By considering reports on hevein and chitinase domains as well as the traditional use of the plant, this report of an intact hevein-chitinase protein and their relative orientation may add further insights for the usefulness of this protein.

Chitinase system of Aeromonas salmonicida, and characterization of enzymes involved in chitin degradation

The genes encoding chitin-degrading enzymes in Aeromonas salmonicida SWSY-1.411 were identified and cloned in Escherichia coli. The strain contained two glycoside hydrolase (GH) families 18 chitinases: AsChiA and AsChiB, two GH19 chitinases: AsChiC and AsChiD, and an auxiliary activities family 10 protein, lytic polysaccharide monooxygenase: AsLPMO10A. These enzymes were successfully expressed in E. coli and purified. AsChiB had the highest hydrolytic activity against insoluble chitin. AsChiD had the highest activity against water-soluble chitin. The peroxygenase activity of AsLPMO10A was lower compared to SmLPMO10A from Serratia marcescens. Synergism on powdered chitin degradation was observed when AsChiA and AsLPMO10A were combined with other chitinases of this strain. More than twice the increase of the synergistic effect was observed when powdered chitin was treated by a combination of AsLPMO10A with all chitinases. GH19 chitinases suppressed the hyphal growth of Trichoderma reesei.

Industrial Use of Cell Wall Degrading Enzymes: The Fine Line Between Production Strategy and Economic Feasibility

Cell Wall Degrading Enzymes (CWDEs) are a heterogeneous group of enzymes including glycosyl-hydrolases, oxidoreductases, lyases, and esterases. Microbes with degrading activities toward plant cell wall polysaccharides are the most relevant source of CWDEs for industrial applications. These organisms secrete a wide array of CWDEs in amounts strictly necessary for their own sustenance, nonetheless the production of CWDEs from wild type microbes can be increased at large-scale by using optimized fermentation strategies. In the last decades, advances in genetic engineering allowed the expression of recombinant CWDEs also in lab-domesticated organisms such as E. coli, yeasts and plants, dramatically increasing the available options for the large-scale production of CWDEs. The optimization of a CWDE-producing biofactory is a hard challenge that biotechnologists tackle by testing different expression strategies and expression-hosts. Although both the yield and production costs are critical factors to produce biomolecules at industrial scale, these parameters are often disregarded in basic research. This review presents the main characteristics and industrial applications of CWDEs directed toward the cell wall of plants, bacteria, fungi and microalgae. Different biofactories for CWDE expression are compared in order to highlight strengths and weaknesses of each production system and how these aspects impact the final enzyme cost and, consequently, the economic feasibility of using CWDEs for industrial applications.

Chitinolytic proteins secreted by Cellulosimicrobium sp. NTK2

Cellulosimicrobium sp. NTK2 (NTK2 strain) was isolated as a chitinolytic bacterium from mature compost derived from chitinous waste. The growth of the NTK2 strain was enhanced by supplementation of the culture medium with 2% crystalline chitin. Approximately 70% of the supplemented crystalline chitin was degraded during cultivation. Whole genome analysis of the NTK2 strain identified eight chitinases and two chitin-binding proteins. The NTK2 strain secreted two bacterial extracellular solute-binding proteins, three family 18 glycosyl hydrolases and one lytic polysaccharide monooxygenase specifically in the presence of crystalline chitin. A chitinolytic enzyme with a molecular mass of 29 kDa on SDS-PAGE under native conditions was also secreted. This chitinolytic enzyme exhibited the largest band upon zymography but could not be identified. In an attempt to identify all the chitinases secreted by the NTK2 strain, we expressed recombinant versions of the proteins exhibiting chitinolytic activity in Escherichia coli. Our results suggest that the 29 kDa protein belonging to family 19 glycosyl hydrolase was expressed specifically in the presence of 2% crystalline chitin.

The Listeria innocua chitinase LinChi78 has a unique region that is necessary for hydrolytic activity

Chitinases are generally composed of multiple domains; a catalytic domain and one or more additional domains that are not absolutely required but may modify the chitinolytic activity. The LinChi78 chitinase from Listeria innocua has a catalytic domain (CatD), a fibronectin type III-like (FnIII) domain, a chitin-binding domain (ChBD), and an unknown-function region (UFR) located between the CatD and FnIII domains. The UFR is 146 amino acid residues in length and does not have a homologous domain in the Conserved Domain Database. We performed a functional analysis of these domains and the UFR using several C-terminally and internally deleted mutants of LinChi78. Hydrolysis of an artificial substrate was almost unaffected by deletion of the ChBD and/or the FnIII domain, although the ChBD-deleted enzymes were approximately 30% less active toward colloidal chitin than LinChi78. On the other hand, deletion of the UFR led to an extensive loss of chitinase activity toward an artificial substrate as well as polymeric substrates. Upon further analysis, we found that the GKQTI stretch, between the 567th (G) and 571th (I) amino acid residues, in the UFR is critical for LinChi78 activity and demonstrated that Gln569 and Ile571 play central roles in eliciting this activity. Taken together, these results indicated that LinChi78 has a unique catalytic region composed of a typical CatD and an additional region that is essential for activity. Characterization of the unique catalytic region of LinChi78 will improve our understanding of GH18 chitinases.

Bioconversion of chitosan into chito-oligosaccharides (CHOS) using family 46 chitosanase from Bacillus subtilis (BsCsn46A)

BsCsn46A, a GH family 46 chitosanase from Bacillus subtilis had been previously shown to have potential for bioconversion of chitosan to chito-oligosaccharides (CHOS). However, so far, in-depth analysis of both the mode of action of this enzyme and the composition of its products were lacking. In this study, we have employed size exclusion chromatography, ¹H NMR, and mass spectrometry to reveal that BsCsn46A can rapidly cleave chitosans with a wide-variety of acetylation degrees, using a non-processive endo-mode of action. The composition of the product mixtures can be tailored by varying the degree of acetylation of the chitosan and the reaction time. Detailed analysis of product profiles revealed differences compared to other chitosanases. Importantly, BsCsn46A seems to be one of the fastest chitosanases described so far. The detailed analysis of preferred endo-binding modes using H₂¹⁸O showed that a hexameric substrate has three productive binding modes occurring with similar frequencies.

Chitinase: diversity, limitations, and trends in engineering for suitable applications

Chitinases catalyze the degradation of chitin, a ubiquitous polymer generated from the cell walls of fungi, shells of crustaceans, and cuticles of insects. They are gaining increasing attention in medicine, agriculture, food and drug industries, and environmental management. Their roles in the degradation of chitin for the production of industrially useful products and in the control of fungal pathogens and insect pests render them attractive for such purposes. However, chitinases have diverse sources, characteristics, and mechanisms of action that seem to restrain optimization procedures and render standardization techniques for enhanced practical applications complex. Hence, results of laboratory trials are not usually consistent with real-life applications. With the growing field of protein engineering, these complexities can be overcome by modifying or redesigning chitinases to enhance specific features required for specific applications. In this review, the variations in features and mechanisms of chitinases that limit their exploitation in biotechnological applications are compiled. Recent attempts to engineer chitinases for improved efficiency are also highlighted.

Production of chitinase from Escherichia fergusonii, chitosanase from Chryseobacterium indologenes, Comamonas koreensis and its application in N-acetylglucosamine production

The important platform polysaccharide N-acetylglucosamine (GlcNAc) has great potential to be used in the fields of food, cosmetics, agricultural, pharmaceutical, medicine and biotechnology. This GlcNAc is being produced by traditional methods of environment-unfriendly chemical digestion with strong acids. Therefore, researchers have been paying more attention to enzymatic hydrolysis process for the production of GlcNAc. Hence, in this study, we isolated novel chitinase (Escherichia fergusonii) and chitosanase (Chryseobacterium indologenes, Comamonas koreensis) producing strains from Korean native calves feces, and developed the potential of an eco-friendly microbial progression for GlcNAc production from swollen chitin and chitosan by enzymatic degradation. Maximum chitinase (7.24±0.07U/ml) and chitosanase (8.42±0.09, 8.51±0.25U/ml) enzyme activity were reached in submerged fermentation at an optimal pH of 7.0 and 30°C. In this study, sucrose, yeast extract, (NH₄)₂SO₄, and NaCl were found to be the potential enhancers of exo-chitinase activity and glucose, corn flour, yeast extract, soybean flour, (NH₄)₂SO₄, NH₄Cl and K₂HPO₄ were found to be the potential activator for exo-chitosanase activity. Optimum concentrations of the carbon sources for enhanced chitinase activity were 9.91, 3.21, 9.86, 1.66U/ml and chitosanase activity were 1.63, 1.13, 2.28, 3.71, 9.02, 4.93, and 2.14U/ml. These enzymes efficiently hydrolyzed swollen chitin and chitosan to N-acetylglucosamine were characterized by thin layer chromatography and were further confirmed by high-pressure liquid chromatography. From a commercial perspective, we isolated, optimized and characterized exochitinase from Escherichia fergusonii (HANDI 110) and chitosanase from Chryseobacterium indologenes (HANYOO), and Comamonas koreensis (HANWOO) for the large-scale production of GlcNAc facilitating its potential use in industrial applications.

Systems analysis of the glycoside hydrolase family 18 enzymes from Cellvibrio japonicus characterizes essential chitin degradation functions

Understanding the strategies used by bacteria to degrade polysaccharides constitutes an invaluable tool for biotechnological applications. Bacteria are major mediators of polysaccharide degradation in nature; however, the complex mechanisms used to detect, degrade, and consume these substrates are not well-understood, especially for recalcitrant polysaccharides such as chitin. It has been previously shown that the model bacterial saprophyte Cellvibrio japonicus is able to catabolize chitin, but little is known about the enzymatic machinery underlying this capability. Previous analyses of the C. japonicus genome and proteome indicated the presence of four glycoside hydrolase family 18 (GH18) enzymes, and studies of the proteome indicated that all are involved in chitin utilization. Using a combination of in vitro and in vivo approaches, we have studied the roles of these four chitinases in chitin bioconversion. Genetic analyses showed that only the chi18D gene product is essential for the degradation of chitin substrates. Biochemical characterization of the four enzymes showed functional differences and synergistic effects during chitin degradation, indicating non-redundant roles in the cell. Transcriptomic studies revealed complex regulation of the chitin degradation machinery of C. japonicus and confirmed the importance of CjChi18D and CjLPMO10A, a previously characterized chitin-active enzyme. With this systems biology approach, we deciphered the physiological relevance of the glycoside hydrolase family 18 enzymes for chitin degradation in C. japonicus, and the combination of in vitro and in vivo approaches provided a comprehensive understanding of the initial stages of chitin degradation by this bacterium.

Characterization of the First Fungal Glycosyl Hydrolase Family 19 Chitinase (NbchiA) from Nosema bombycis (Nb)

Chitinases (EC 3.2.1.14), as one kind of glycosyl hydrolase, hydrolyze the β-(1,4) linkages of chitin. According to the sequence similarity, chitinases can be divided into glycoside hydrolase family 18 and family 19. Here, a chitinase from Nosema bombycis (NbchiA) was cloned and purified by metal affinity chromatography and molecular exclusion chromatography. Sequence analysis indicated that NbchiA belongs to glycoside hydrolase family 19 class IV chitinase. The optimal pH and temperature of NbchiA are 7.0 and 40 °C, respectively. This purified chitinase showed high activity toward soluble substrates such as ethylene glycol chitin and soluble chitosan. The degradation of chitin oligosaccharides (GlcNAc)(2-5) detected by high-performance liquid chromatography showed that NbchiA hydrolyzed mainly the second glycosidic linkage from the reducing end of (GlcNAc)(3-5). On the basis of structure-based multiple-sequence alignment, Glu51 and Glu60 are believed to be the key catalytic residues. The site-directed mutation analysis revealed that the enzymatic activity was decreased upon mutation of Glu60, whereas mutation of Glu51 totally abolished the enzymatic activity. This is the first report of a GH19 chitinase in fungi and in Microsporidia.

Control of chitin and N-acetylglucosamine utilization in Saccharopolyspora erythraea

Chitin degradation and subsequent N-acetylglucosamine (GlcNAc) catabolism is thought to be a common trait of a large majority of actinomycetes. Utilization of aminosugars had been poorly investigated outside the model strain Streptomyces coelicolor A3(2), and we examined here the genetic setting of the erythromycin producer Saccharopolyspora erythraea for GlcNAc and chitin utilization, as well as the transcriptional control thereof. Sacch. erythraea efficiently utilize GlcNAc most likely via the phosphotransferase system (PTS(GlcNAc)); however, this strain is not able to grow when chitin or N,N'-diacetylchitobiose [(GlcNAc)2] is the sole nutrient source, despite a predicted extensive chitinolytic system (chi genes). The inability of Sacch. erythraea to utilize chitin and (GlcNAc)2 is probably because of the loss of genes encoding the DasABC transporter for (GlcNAc)2 import, and genes for intracellular degradation of (GlcNAc)2 by β-N-acetylglucosaminidases. Transcription analyses revealed that in Sacch. erythraea all putative chi and GlcNAc utilization genes are repressed by DasR, whereas in Strep. coelicolor DasR displayed either activating or repressing functions whether it targets genes involved in the polymer degradation or genes for GlcNAc dimer and monomer utilization, respectively. A transcriptomic analysis further showed that GlcNAc not only activates the transcription of GlcNAc catabolism genes but also activates chi gene expression, as opposed to the previously reported GlcNAc-mediated catabolite repression in Strep. coelicolor. Finally, synteny exploration revealed an identical genetic background for chitin utilization in other rare actinomycetes, which suggests that screening procedures that used only the chitin-based protocol for selective isolation of antibiotic-producing actinomycetes could have missed the isolation of many industrially promising strains.

Chitinolytic microorganisms and their possible application in environmental protection

This paper provides a review of the latest research findings on the applications of microbial chitinases to biological control. Microorganisms producing these enzymes can inhibit the growth of many fungal diseases that pose a serious threat to global crop production. Currently, efforts are being made to discover producers of chitinolytic enzymes. The potential exists that natural biofungicides will replace chemical fungicides or will be used to supplement currently used fungicides, which would reduce the negative impact of chemicals on the environment and support the sustainable development of agriculture and forestry.

Fish processing wastes for microbial enzyme production: a review

Fishery processing industries generate large amounts of by-products. The disposal of these wastes represents an increasing environmental and health problem. To avoid wasting these by-products, various disposal methods have been applied including, ensilation, fermentation, hydrolysate and fish oil production. Interestingly, fish by-products provide an excellent nutrient source for microbial growth useful in enzyme production process, which is largely governed by the cost related to the growth media. Fish wastes (heads, viscera, chitinous material, wastewater, etc.) were prepared and tested as growth substrates for microbial enzymes production such as protease, lipase, chitinolytic and ligninolytic enzymes. This new approach described in this review can reduce environmental problems associated with waste disposal and, simultaneously, lower the cost of microbial enzyme production.

Comparative functional analysis of the human macrophage chitotriosidase

This work analyses the chitin-binding and catalytic domains of the human macrophage chitotriosidase and investigates the physiological role of this glycoside hydrolase in a complex mechanism such as the innate immune system, especially its antifungal activity. Accordingly, we first analyzed the ability of its chitin-binding domain to interact with chitin embedded in fungal cell walls using the β-lactamase activity reporter system described in our previous work. The data showed that the chitin-binding activity was related to the cell wall composition of the fungi strains and that their peptide-N-glycosidase/zymolyase treatments increased binding to fungal by increasing protein permeability. We also investigated the antifungal activity of the enzyme against Candida albicans. The antifungal properties of the complete chitotriosidase were analyzed and compared with those of the isolated chitin-binding and catalytic domains. The isolated catalytic domain but not the chitin-binding domain was sufficient to provide antifungal activity. Furthermore, to explain the lack of obvious pathologic phenotypes in humans homozygous for a widespread mutation that renders chitotriosidase inactive, we postulated that the absence of an active chitotriosidase might be compensated by the expression of another human hydrolytic enzyme such as lysozyme. The comparison of the antifungal properties of chitotriosidase and lysozyme indicated that surprisingly, both enzymes have similar in vitro antifungal properties. Furthermore, despite its more efficient hydrolytic activity on chitin, the observed antifungal activity of chitotriosidase was lower than that of lysozyme. Finally, this antifungal duality between chitotriosidase and lysozyme is discussed in the context of innate immunity.

Domain structure and function of α-1,3-glucanase from Bacillus circulans KA-304, an enzyme essential for degrading basidiomycete cell walls

Bacillus circulans KA-304 α-1,3-glucanase (Agl-KA) includes an N-terminal discoidin domain (DS1), a carbohydrate binding module family 6 (CB6), threonine and proline repeats (TPs), a second discoidin domain (DS2), an uncharacterized conserved domain (UCD), and a C-terminal catalytic domain. Domain deletion enzymes lacking DS1, CB6, and DS2 exhibited lower α-1,3-glucan-hydrolyzing and -binding activities than the wild type, Agl-KA. An α-1,3-glucan binding assay with fluorescent protein fusion proteins indicated that DS1, CB6, and DS2 bound to α-1,3-glucan and fungal cell walls, and that binding efficiency was increased by their combined action. In contrast, UCD did not exhibit any α-1,3-glucan-binding activity. A dramatic decrease in protoplast formation in the Schizophyllum commune mycelium was observed given only a DS1 deletion. An Agl-KA with deletion DS1, CB6, and DS2 produced no protoplasts. These results indicate that the combined actions of DS1, CB6, and DS2 contributed to increased cell-wall binding and were indispensable for efficient Agl-KA cell-wall degradation.

Molecular screening of Streptomyces isolates for antifungal activity and family 19 chitinase enzymes

Thirty soil-isolates of Streptomyces were analyzed to determine their antagonism against plant-pathogenic fungi including Fusarium oxysporum, Pythium aristosporum, Colletotrichum gossypii, and Rhizoctonia solani. Seven isolates showed antifungal activity against one or more strain of the tested fungi. Based on the 16S rDNA sequence analysis, these isolates were identified as Streptomyces tendae (YH3), S. griseus (YH8), S. variabilis (YH21), S. endus (YH24), S. violaceusniger (YH27A), S. endus (YH27B), and S. griseus (YH27C). The identity percentages ranged from 98 to 100%. Although some isolates belonged to the same species, there were many differences in their cultural and morphological characteristics. Six isolates out of seven showed chitinase activity according to a chitinolytic activity test and on colloidal chitin agar plates. Based on the conserved regions among the family 19 chitinase genes of Streptomyces sp. two primers were used for detection of the chitinase (chiC) gene in the six isolates. A DNA fragment of 1.4 kb was observed only for the isolates YH8, YH27A, and YH27C. In conclusion, six Streptomyces strains with potential chitinolytic activity were identified from the local environment in Taif City, Saudi Arabia. Of these isolates, three belong to family 19 chitinases. To our knowledge, this is the first reported presence of a chiC gene in S. violaceusniger YH27A.

Biomimetic engineering of modular bispecific antibodies for biomolecule immobilization

Modular bispecific antibodies (BsAb's) that interact directly with a gold surface were engineered for immobilization on biosensing devices. The BsAb's consist of the variable fragments of antigold and antilysozyme antibodies connected via one of three linkers derived from naturally occurring proteins. The BsAb's were bound tightly to both the gold surface and to lysozyme, thus functioning as interface molecules between lysozyme and the gold surface without a substantial loss of antigen-binding activity. The antigen-binding capacity (the ratio of the amount of immobilized lysozyme to the amount of immobilized BsAb) on the gold surface reached 82%. An analysis of the correlation between binding capacity and linker characteristics indicated that the presence of a long, rigid linker sequence derived from a cellulase resulted in a higher antigen-binding capacity than did the presence of a long but relatively flexible glycine-rich linker. This result suggests a strategy for designing linkers suitable for BsAb-based biomolecular immobilization.

Cloning and characterization of a small family 19 chitinase from moss (Bryum coronatum)

Chitinase-A (BcChi-A) was purified from a moss, Bryum coronatum, by several steps of column chromatography. The purified BcChi-A was found to be a molecular mass of 25 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and an isoelectric point of 3.5. A cDNA encoding BcChi-A was cloned by rapid amplification of cDNA ends and polymerase chain reaction. It consisted of 1012 nucleotides and encoded an open reading frame of 228 amino acid residues. The predicted mature BcChi-A consists of 205 amino acid residues and has a molecular weight of 22,654. Sequence analysis indicated that BcChi-A is glycoside hydrolase family-19 (GH19) chitinase lacking loops I, II, IV and V, and a C-terminal loop, which are present in the catalytic domain of plant class I and II chitinases. BcChi-A is a compact chitinase that has the fewest loop regions of the GH19 chitinases. Enzymatic experiments using chitooligosaccharides showed that BcChi-A has higher activity toward shorter substrates than class II enzymes. This characteristic is likely due to the loss of the loop regions that are located at the end of the substrate-binding cleft and would be involved in substrate binding of class II enzymes. This is the first report of a chitinase from mosses, nonvascular plants.

Biotechnological approaches to develop bacterial chitinases as a bioshield against fungal diseases of plants

Fungal diseases of plants continue to contribute to heavy crop losses in spite of the best control efforts of plant pathologists. Breeding for disease-resistant varieties and the application of synthetic chemical fungicides are the most widely accepted approaches in plant disease management. An alternative approach to avoid the undesired effects of chemical control could be biological control using antifungal bacteria that exhibit a direct action against fungal pathogens. Several biocontrol agents, with specific fungal targets, have been registered and released in the commercial market with different fungal pathogens as targets. However, these have not yet achieved their full commercial potential due to the inherent limitations in the use of living organisms, such as relatively short shelf life of the products and inconsistent performance in the field. Different mechanisms of action have been identified in microbial biocontrol of fungal plant diseases including competition for space or nutrients, production of antifungal metabolites, and secretion of hydrolytic enzymes such as chitinases and glucanases. This review focuses on the bacterial chitinases that hydrolyze the chitinous fungal cell wall, which is the most important targeted structural component of fungal pathogens. The application of the hydrolytic enzyme preparations, devoid of live bacteria, could be more efficacious in fungal control strategies. This approach, however, is still in its infancy, due to prohibitive production costs. Here, we critically examine available sources of bacterial chitinases and the approaches to improve enzymatic properties using biotechnological tools. We project that the combination of microbial and recombinant DNA technologies will yield more effective environment-friendly products of bacterial chitinases to control fungal diseases of crops.

Chitin research revisited

Two centuries after the discovery of chitin, it is widely accepted that this biopolymer is an important biomaterial in many aspects. Numerous studies on chitin have focused on its biomedical applications. In this review, various aspects of chitin research including sources, structure, biosynthesis, chitinolytic enzyme, chitin binding protein, genetic engineering approach to produce chitin, chitin and evolution, and a wide range of applications in bio- and nanotechnology will be dealt with.

High affinity anti-inorganic material antibody generation by integrating graft and evolution technologies: potential of antibodies as biointerface molecules

Recent advances in molecular evolution technology enabled us to identify peptides and antibodies with affinity for inorganic materials. In the field of nanotechnology, the use of the functional peptides and antibodies should aid the construction of interface molecules designed to spontaneously link different nanomaterials; however, few material-binding antibodies, which have much higher affinity than short peptides, have been identified. Here, we generated high affinity antibodies from material-binding peptides by integrating peptide-grafting and phage-display techniques. A material-binding peptide sequence was first grafted into an appropriate loop of the complementarity determining region (CDR) of a camel-type single variable antibody fragment to create a low affinity material-binding antibody. Application of a combinatorial library approach to another CDR loop in the low affinity antibody then clearly and steadily promoted affinity for a specific material surface. Thermodynamic analysis demonstrated that the enthalpy synergistic effect from grafted and selected CDR loops drastically increased the affinity for material surface, indicating the potential of antibody scaffold for creating high affinity small interface units. We show the availability of the construction of antibodies by integrating graft and evolution technology for various inorganic materials and the potential of high affinity material-binding antibodies in biointerface applications.

Bacterial community composition and chitinase gene diversity of vermicompost with antifungal activity

Bacterial communities and chitinase gene diversity of vermicompost (VC) were investigated to clarify the influence of earthworms on the inhibition of plant pathogenic fungi in VC. The spore germination of Fusarium moniliforme was reduced in VC aqueous extracts prepared from paper sludge and dairy sludge (fresh sludge, FS). The bacterial communities were examined by culture-dependent and -independent analyses. Unique clones selected from 16S rRNA libraries of FS and VC on the basis of restriction fragment length polymorphism (RFLP) fell into the major lineages of the domain bacteria Proteobacteria, Bacteroidetes, Verrucomicrobia, Actinobacteria and Firmicutes. Among culture isolates, Actinobacteria dominated in VC, while almost equal numbers of Actinobacteria and Proteobacteria were present in FS. Analysis of chitinolytic isolates and chitinase gene diversity revealed that chitinolytic bacterial communities were enriched in VC. Populations of bacteria that inhibited plant fungal pathogens were higher in VC than in FS and particularly chitinolytic isolates were most active against the target fungi.

Human anti-gold antibodies: biofunctionalization of gold nanoparticles and surfaces with anti-gold antibodies

The interface molecules designed to exhibit molecular recognitions between different species have become attractive tools for the bottom-up fabrication and hybridization of nanostructured units. Here, we focus on antibodies with high binding ability and specificity to construct a novel biomolecule interface for recognizing an inorganic material. Careful selection from a phage-displayed library of variable region heavy and light Fv chains of human antibodies using enzyme-linked immunosorbent assay and surface plasmon resonance assay resulted in the identification of an antibody fragment, A14P-b2, with high affinity (KD = 1.7 nm) and specificity for gold materials. Our results indicated the potential usefulness of human antibody libraries and the effectiveness of the antibody framework for recognizing bulk material surfaces. Construction of bivalent and bispecific antibodies on the A14P-b2 platform with high affinity by means of fusion technology enabled the functionalization of gold nanoparticles and allowed selective protein accumulation on gold spots patterned on a silicon substrate. This type of antibody engineering is potentially applicable to bio-inspired materials and nanobiosensing.

Biochemical characteristics of C-terminal region of recombinant chitinase from Bacillus licheniformis: implication of necessity for enzyme properties

The functional and structural significance of the C-terminal region of Bacillus licheniformis chitinase was explored using C-terminal truncation mutagenesis. Comparative studies between full-length and truncated mutant molecules included initial rate kinetics, fluorescence and CD spectrometric properties, substrate binding and hydrolysis abilities, thermostability, and thermodenaturation kinetics. Kinetic analyses revealed that the overall catalytic efficiency, k(cat)/K(m), was slightly increased for the truncated enzymes toward the soluble 4-methylumbelliferyl-N-N'-diacetyl chitobiose or 4-methylumbelliferyl-N-N''-N'''-triacetyl chitotriose or insoluble alpha-chitin substrate. By contrast, changes to substrate affinity, K(m), and turnover rate, k(cat), varied considerably for both types of chitin substrates between the full-length and truncated enzymes. Both truncated enzymes exhibited significantly higher thermostabilities than the full-length enzyme. The truncated mutants retained similar substrate-binding specificities and abilities against the insoluble substrate but only had approximately 75% of the hydrolyzing efficiency of the full-length chitinase molecule. Fluorescence spectroscopy indicated that both C-terminal deletion mutants retained an active folding conformation similar to the full-length enzyme. However, a CD melting unfolding study was able to distinguish between the full-length and truncated mutant molecules by the two phases of apparent transition temperatures in the mutants. These results indicate that up to 145 amino acid residues, including the putative C-terminal chitin-binding region and the fibronectin (III) motif of B. licheniformis chitinase, could be removed without causing a seriously aberrant change in structure and a dramatic decrease in insoluble chitin hydrolysis. The results of the present study provide evidence demonstrating that the binding and hydrolyzing of insoluble chitin substrate for B. licheniformis chitinase was not dependent solely on the putative C-terminal chitin-binding region and the fibronectin (III) motif.

Characterization of NtChitIV, a class IV chitinase induced by beta-1,3-, 1,6-glucan elicitor from Alternaria alternata 102: Antagonistic effect of salicylic acid and methyl jasmonate on the induction of NtChitIV

Tobacco BY-2 class IV chitinases (TBC-1, TBC-3) were rapidly and transiently induced by the beta-1,3-, 1,6-glucan elicitor from Alternaria alternata 102 (AaGlucan). The full-length cDNA and 5'-flanking region of a gene encoding class IV chitinases were isolated on the basis of the amino acid sequence of TBC-1. Sequence analysis indicated that NtChitIV encoded TBC-1, TBC-3, or both. Since purified TBC-1 and TBC-3 from BY-2 cells lack a chitin binding domain in the N-terminal region, these enzymes suggested to be derived from NtChitIV by post-translational proteolytic processing. The transcripts of NtChitIV accumulated rapidly within 1h after treatment with AaGlucan. Accumulation was maximal 3h after treatment. Reporter gene assays were used to analyze the promoter regions involved in the transcriptional control of NtChitIV, and these assays revealed that the 1.89-kb NtChitIV promoter was activated by AaGlucan but not by salicylic acid (SA) or methyl jasmonate (MeJA). The AaGlucan-induced transcriptional activation via 1.89-kb NtChitIV promoter was attenuated by pretreatment with SA or MeJA. These results suggest that NtChitIV expression is particularly induced by AaGlucan and that the AaGlucan-dependent signaling pathway is different from the SA- and MeJA-dependent signaling pathways.

Increased insect virulence in Beauveria bassiana strains overexpressing an engineered chitinase

Entomopathogenic fungi are currently being used for the control of several insect pests as alternatives or supplements to chemical insecticides. Improvements in virulence and speed of kill can be achieved by understanding the mechanisms of fungal pathogenesis and genetically modifying targeted genes, thus improving the commercial efficacy of these biocontrol agents. Entomopathogenic fungi, such as Beauveria bassiana, penetrate the insect cuticle utilizing a plethora of hydrolytic enzymes, including chitinases, which are important virulence factors. Two chitinases (Bbchit1 and Bbchit2) have previously been characterized in B. bassiana, neither of which possesses chitin-binding domains. Here we report the construction and characterization of several B. bassiana hybrid chitinases where the chitinase Bbchit1 was fused to chitin-binding domains derived from plant, bacterial, or insect sources. A hybrid chitinase containing the chitin-binding domain (BmChBD) from the silkworm Bombyx mori chitinase fused to Bbchit1 showed the greatest ability to bind to chitin compared to other hybrid chitinases. This hybrid chitinase gene (Bbchit1-BmChBD) was then placed under the control of a fungal constitutive promoter (gpd-Bbchit1-BmChBD) and transformed into B. bassiana. Insect bioassays showed a 23% reduction in time to death in the transformant compared to the wild-type fungus. This transformant also showed greater virulence than another construct (gpd-Bbchit1) with the same constitutive promoter but lacking the chitin-binding domain. We utilized a strategy where genetic components of the host insect can be incorporated into the fungal pathogen in order to increase host cuticle penetration ability.

Crystal structure and enzymatic properties of a bacterial family 19 chitinase reveal differences from plant enzymes

We describe the cloning, overexpression, purification, characterization and crystal structure of chitinase G, a single-domain family 19 chitinase from the Gram-positive bacterium Streptomyces coelicolor A3(2). Although chitinase G was not capable of releasing 4-methylumbelliferyl from artificial chitooligosaccharide substrates, it was capable of degrading longer chitooligosaccharides at rates similar to those observed for other chitinases. The enzyme was also capable of degrading a colored colloidal chitin substrate (carboxymethyl-chitin-remazol-brilliant violet) and a small, presumably amorphous, subfraction of alpha-chitin and beta-chitin, but was not capable of degrading crystalline chitin completely. The crystal structures of chitinase G and a related Streptomyces chitinase, chitinase C [Kezuka Y, Ohishi M, Itoh Y, Watanabe J, Mitsutomi M, Watanabe T & Nonaka T (2006) J Mol Biol358, 472-484], showed that these bacterial family 19 chitinases lack several loops that extend the substrate-binding grooves in family 19 chitinases from plants. In accordance with these structural features, detailed analysis of the degradation of chitooligosaccharides by chitinase G showed that the enzyme has only four subsites (- 2 to + 2), as opposed to six (- 3 to + 3) for plant enzymes. The most prominent structural difference leading to reduced size of the substrate-binding groove is the deletion of a 13-residue loop between the two putatively catalytic glutamates. The importance of these two residues for catalysis was confirmed by a site-directed mutagenesis study.

Biotechnological aspects of chitinolytic enzymes: a review

Chitin and chitinases (EC 3.2.1.14) have an immense potential. Chitinolytic enzymes have wide-ranging applications such as preparation of pharmaceutically important chitooligosaccharides and N-acetyl D-glucosamine, preparation of single-cell protein, isolation of protoplasts from fungi and yeast, control of pathogenic fungi, treatment of chitinous waste, and control of malaria transmission. In this review, we discuss the occurrence and structure of chitin, the types and sources of chitinases, their mode of action, chitinase production, as well as molecular cloning and protein engineering of chitinases and their biotechnological applications.

Importance of Trp59 and Trp60 in chitin-binding, hydrolytic, and antifungal activities of Streptomyces griseus chitinase C

The chitin-binding domain of Streptomyces griseus chitinase C (ChBD(ChiC)) belongs to CBM family 5. Only two exposed aromatic residues, W59 and W60, were observed in ChBD(ChiC), in contrast to three such residues on CBD(Cel5) in the same CBM family. To study importance of these residues in binding activity and other functions of ChBD(ChiC), site-directed mutagenesis was carried out. Single (W59A and W60A) and double (W59A/W60A) mutations abolished the binding activity of ChiC to colloidal chitin and decreased the hydrolytic activity toward not only colloidal chitin but also a soluble high Mr substrate, glycol chitin. Interaction of ChBD(ChiC) with oligosaccharide was eliminated by these mutations. The hydrolytic activity toward oligosaccharide was increased by deletion of ChBD but not affected by these mutations, indicating that ChBD interferes with oligosaccharide hydrolysis but not through its binding activity. The antifungal activity was drastically decreased by all mutations and significant difference was observed between single and double mutants. Taken together with the structural information, these results suggest that ChBD(ChiC) binds to chitin via a mechanism significantly different from CBD(Cel5), where two aromatic residues play major role, and contributes to various functions of ChiC. Sequence comparison indicated that ChBD(ChiC)-type CBMs are dominant in CBM family 5.

Structural Studies of a Two-domain Chitinase from Streptomyces griseus HUT6037

Chitinase C (ChiC) from Streptomyces griseus HUT6037 was the first glycoside hydrolase family 19 chitinase that was found in an organism other than higher plants. An N-terminal chitin-binding domain and a C-terminal catalytic domain connected by a linker peptide constitute ChiC. We determined the crystal structure of full-length ChiC, which is the only representative of the two-domain chitinases in the family. The catalytic domain has an alpha-helix-rich fold with a deep cleft containing a catalytic site, and lacks three loops on the domain surface compared with the catalytic domain of plant chitinases. The chitin-binding domain is an all-beta protein with two tryptophan residues (Trp59 and Trp60) aligned on the surface. We suggest the binding mechanism of tri-N-acetylchitotriose onto the chitin-binding domain on the basis of molecular dynamics (MD) simulations. In this mechanism, the ligand molecule binds well on the surface-exposed binding site through two stacking interactions and two hydrogen bonds and only Trp59 and Trp60 are involved in the binding. Furthermore, the flexibility of the Trp60 side-chain, which may be involved in adjusting the binding surface to fit the surface of crystalline chitin by the rotation of chi2 angle, is shown.

Identification of the Substrate Interaction Region of the Chitin-Binding Domain of Streptomyces griseus Chitinase C

Chitinase C from Streptomyces griseus HUT6037 was discovered as the first bacterial chitinase in family 19 other than chitinases found in higher plants. Chitinase C comprises two domains: a chitin-binding domain (ChBD(ChiC)) for attachment to chitin and a chitin-catalytic domain for digesting chitin. The structure of ChBD(ChiC) was determined by means of 13C-, 15N-, and 1H-resonance nuclear magnetic resonance (NMR) spectroscopy. The conformation of its backbone comprised two beta-sheets composed of two and three antiparallel beta-strands, respectively, this being very similar to the backbone conformations of the cellulose-binding domain of endoglucanase Z from Erwinia chrysanthemi (CBD(EGZ)) and the chitin-binding domain of chitinase A1 from Bacillus circulans WL-12 (ChBD(ChiA1)). The interaction between ChBD(ChiC) and hexa-N-acetyl-chitohexaose was monitored through chemical shift perturbations, which showed that ChBD(ChiC) interacted with the substrate through two aromatic rings exposed to the solvent as CBD(EGZ) interacts with cellulose through three characteristic aromatic rings. Comparison of the conformations of ChBD(ChiA1), ChBD(ChiC), and other typical chitin- and cellulose-binding domains, which have three solvent-exposed aromatic residues responsible for binding to polysaccharides, has suggested that they have adopted versatile binding site conformations depending on the substrates, with almost the same backbone conformations being retained.

Biochemical characterization and site-directed mutational analysis of the double chitin-binding domain from chitinase 92 ofAeromonas hydrophilaJP101

Chitinase 92 from Aeromonas hydrophila JP101 contains C-terminal repeated chitin-binding domains (ChBDs) which were named ChBD(CI) and ChBD(CII) and classified into family 5 carbohydrate-binding modules on the basis of sequence. In this work, we constructed single and double ChBD by use of the pET system, which expressed as isolated ChBD(CII) or ChBD(CICII). Polysaccharide-binding studies revealed that ChBD(CICII) not only bound to chitin, but also to other insoluble polysaccharides such as cellulose (Avicel) and xylan. In comparison with ChBD(CII), the binding affinities of ChBD(CICII) are about 10- and 12-fold greater toward colloidal and powdered chitin, indicating that a cooperative interaction exists between ChBD(CI) and ChBD(CII). In order to investigate the roles of the highly conserved aromatic amino acids in the interaction of ChBD(CICII) and chitin, we have performed site-directed mutagenesis. The data showed that W773A, W792A, Y796A and W797A mutant proteins exhibited a much weaker affinity for chitin than wild-type protein, suggesting that these residues play important roles in chitin binding.