Phenanthrothiophene-Triazine Star-Shaped Discotic Liquid Crystals: Synthesis, Self-Assembly, and Stimuli-Responsive Fluorescence Properties

Lipophilic biphenylthiophene- and phenanthrothiophene-triazine compounds, BPTTn and CPTTn, respectively, were prepared by a tandem procedure involving successive Suzuki-Miyaura coupling and Scholl cyclodehydrogenation reactions. These compounds display photoluminescence in solution and in thin film state, solvatochromism with increasing solvent's polarity, as well as acidochromism and metal ion recognition stimuli-responsive fluorescence. Protonation of BPTT10 and CPTT10 by trifluoroacetic acid results in fluorescence quenching, which is reversibly restored once treated with triethylamine (ON-OFF switch). DFT computational studies show that intramolecular charge transfer (ICT) phenomena occurs for both molecules, and reveal that protonation enhances the electron-withdrawing ability of the triazine core and reduces the band gap. This acidochromic behavior was applied to a prototype fluorescent anti-counterfeiting device. They also specifically recognize Fe3+ through coordination, and the recognition mechanism is closely related to the photoinduced electron transfer between Fe3+ and BPTT10/CPTT10. CPTTn self-assemble into columnar rectangular (Colrec) mesophase, which can be modulated by oleic acid via the formation of a hydrogen-bonded supramolecular liquid crystal hexagonal Colhex mesophase. Finally, CPTTn also form organic gels in alkanes at low critical gel concentration (3.0 mg/mL). Therefore, these star-shaped triazine molecules possess many interesting features and thus hold great promises for information processing, liquid crystal semiconductors and organogelators.

Diboraperylene Diborinic Acid Self-Assembly on Ag(111)-Kagome Flat Band Localized States Imaged by Scanning Tunneling Microscopy and Spectroscopy

Replacement of sp2-hybridized carbon in polycyclic aromatic hydrocarbons (PAHs) by boron affords electron-deficient π-scaffolds due to the vacant pz-orbital of three-coordinate boron with the potential for pronounced electronic interactions with electron-rich metal surfaces. Using a diboraperylene diborinic acid derivative as precursor and a controlled on-surface non-covalent synthesis approach, we report on a self-assembled chiral supramolecular kagome network on an Ag(111) surface stabilized by intermolecular hydrogen-bonding interactions at low temperature. Scanning tunneling microscopy (STM) and spectroscopy (STS) reveal a flat band at ca. 0.33 eV above the Fermi level which is localized at the molecule center, in good agreement with tight-binding model calculations of flat bands characteristic for kagome lattices.

Recent advances in the synthesis and applications of fluoranthenes

As an important subclass of polycyclic aromatic hydrocarbons (PAHs), fluoranthenes continue to attract significant attention in synthetic organic chemistry and materials science. In this article, an overview of recent advances in the synthesis of fluoranthene derivatives along with selected applications is provided. First, methods for fluoranthene synthesis with a classification based on strategic bond disconnections are discussed. Then, the total syntheses of natural products featuring the benzo[j]fluoranthene skeleton are covered. Finally, examples of important applications of a variety of fluoranthenes are summarized.

Temperature-dependent hole mobility in pyrene-thiophene-based room-temperature discotic liquid crystals

π-Conjugated pyrene-thiophene-based room-temperature discotic liquid crystals armed with four peripheral aliphatic chains are reported to study their potential use in a hole-transporting organic semiconductor. The charge carrier mobility studies using the ToF method revealed room temperature hole mobility in the order of 10-4 cm2 V-1 s-1 for both mesogens. However, the mobility values for compound 1a were observed in the order of 10-3 cm2 V-1 s-1 at high temperatures. Such molecular systems can potentially be used in nonlinear organic electronic applications.

π-Extension of Indoles Using Acrolein Linker: Synthesis of Indolo[3,2-a]carbazole-6-carbaldehydes and Racemosin B

A simple method for the synthesis of indolo[3,2-a]carbazole-6-carbaldehydes by the π-extension of indoles with acrolein is reported. The scope of the method is demonstrated with 33 examples. The products exhibit high activities toward advanced synthesis and are proved to be able to produce valuable chemicals, such as natural products, dyes, and organic fluorescent materials. In addition, the alkaloid racemosin B can be prepared by this method in two steps in ∼50% overall yield.

Environmental organic contaminant body burdens and GC-MS based untargeted metabolomics in mediterranean mussels from Port Phillip Bay, Australia☆

Mussels were collected from four coastal sites around Port Phillip Bay, Australia in Mar and Apr 2021). Body burdens of Polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and organochlorine pesticides (OCPs) were measured and the possible sources of toxicants discussed. In addition, a gas chromatography-mass spectrometry (GC-MS) based untargeted metabolomics analysis was performed using the mantle tissues of mussels. Correlations between the results of contaminant body burdens and metabolic variations were investigated. The results demonstrated that high accumulations of low-molecular-weight PAHs were found in mussels. High body burdens of PCBs and OCPs were only found at mussels from the site close to the river mouth. Some of the metabolic pathways were correlated with the accumulation of PAHs. No correlations were found between PCB and OCP accumulations and metabolic abundances. According to the food and environmental standards of the European Union (EU), the PAH, PCB, and OCP accumulation in mussels in this study are a serious food safety concern.

Accurate Prediction of Adiabatic Ionization Energies for PAHs and Substituted Analogues

The accurate calculation of adiabatic ionization energies (AIEs) for polycyclic aromatic hydrocarbons (PAHs) and their substituted analogues is essential for understanding their electronic properties, reactivity, stability, and environmental/health implications. This study demonstrates that the M06-2X density functional theory method excels in predicting the AIEs of polycyclic aromatic hydrocarbons and related molecules, rivaling the (R)CCSD(T)-F12 method in terms of accuracy. These findings suggest that M06-2X, coupled with an appropriate basis set, represents a reliable and efficient method for studying polycyclic aromatic hydrocarbons and related molecules, aligning well with the experimental techniques. The set of molecules examined in this work encompasses numerous polycyclic aromatic hydrocarbons from m/z 67 up to m/z 1,176, containing heteroatoms that may be found in biofuels or nucleic acid bases, making the results highly relevant for photoionization experiments and mass spectrometry. For coronene-derivative molecular species with the C6n2H6n chemical formula, we give an expression to predict their AIEs (AIE (n) = 4.359 + 4.8743n-0.72057, in eV) upon extending the π-aromatic cloud until reaching graphene. In the long term, the application of this method is anticipated to contribute to a deeper understanding of the relationships between PAHs and graphene, guiding research in materials science and electronic applications and serving as a valuable tool for validating theoretical calculation methods.

Induction and Stabilization of Columnar Mesophases in Fluorinated Polycyclic Aromatic Hydrocarbons by Arene-Perfluoroarene Interactions

The straightforward synthesis of several Fluorinated Polycyclic Aromatic Hydrocarbons by the efficient, transition-metal-free, arene fluorine nucleophilic substitution reaction is described, and the full investigation of their liquid crystalline and optical properties reported. The key precursors for this study, i. e. 2,2'-dilithio-4,4',5,5'-tetraalkoxy-1,1'-biphenyl derivatives, were obtained in two steps from the highly selective Scholl oxidative homo-coupling of 3,4-dialkoxy-1-bromobenzene, followed by quantitative double-lithiation. In situ room temperature nucleophilic annulation with either perfluorobenzene or perfluoronaphthalene leads to 1,2,3,4-tetrafluoro-6,7,10,11-tetraalkxoytriphenylenes and 9,10,11,12,13,14-hexafluoro-2,3,6,7-tetraalkoxybenzo[f]tetraphenes, respectively, in good yields. Exploiting the same strategy, subsequent double annulations resulted in the formation of 9,18-difluoro-2,3,6,7,11,12,15,16-octa(alkoxy)tribenzo[f,k,m]tetraphenes and 9,10,19,20-tetrafluoro-2,3,6,7,12,13,16,17-octakis(hexyloxy)tetrabenzo[a,c,j,l]tetracenes, respectively. Despite the presence of only four alkoxy chains, the polar "Janus" mesogens display a columnar hexagonal mesophase over broad temperature ranges, with higher mesophase stability than the archetypical 2,3,6,7,10,11-hexa(alkoxy)triphenylenes and their hydrogenated counterparts. The improvement or induction of mesomorphism is attributed to efficient antiparallel face-to-face π-stacking driven by the establishment of non-covalent perfluoroarene-arene intermolecular interactions. The larger lipophilic discotic π-extended compounds also exhibit columnar mesomorphism, over similar temperature ranges and stability than their hydrogenated homologs. Finally, these fluorinated molecules form stringy gels in various solvents, and show interesting solvatochromic emission properties in solution as well as strong emission in thin films and gels.

Two-Step Synthesis of B2 N2 -Doped Polycyclic Aromatic Hydrocarbon Containing Pentagonal and Heptagonal Rings with Long-Lived Delayed Fluorescence

Pentagon-heptagon embedded polycyclic aromatic hydrocarbons (PAHs) have aroused increasing attention in recent years due to their unique physicochemical properties. Here, for the first time, this report demonstrates a facile method for the synthesis of a novel B2 N2 -doped PAH (BN-2) containing two pairs of pentagonal and heptagonal rings in only two steps. In the solid state of BN-2, two different conformations, including saddle-shaped and up-down geometries, are observed. Through a combined spectroscopic and calculation study, the excited-state dynamics of BN-2 is well-investigated in this current work. The resultant pentagon-heptagon embedded B2 N2 -doped BN-2 displays both prompt fluorescence and long-lived delayed fluorescence components at room temperature, with the triplet excited-state lifetime in the microsecond time region (τ = 19 µs). The triplet-triplet annihilation is assigned as the mechanism for the observed long-lived delayed fluorescence. Computational analyses attributed this observation to the small energy separation between the singlet and triplet excited states, facilitating the intersystem crossing (ISC) process which is further validated by the ultrafast spectroscopic measurements.

Interpretable Deep-Learning Unveils Structure-Property Relationships in Polybenzenoid Hydrocarbons

In this work, interpretable deep learning was used to identify structure-property relationships governing the HOMO-LUMO gap and the relative stability of polybenzenoid hydrocarbons (PBHs) using a ring-based graph representation. This representation was combined with a subunit-based perception of PBHs, allowing chemical insights to be presented in terms of intuitive and simple structural motifs. The resulting insights agree with conventional organic chemistry knowledge and electronic structure-based analyses and also reveal new behaviors and identify influential structural motifs. In particular, we evaluated and compared the effects of linear, angular, and branching motifs on these two molecular properties and explored the role of dispersion in mitigating the torsional strain inherent in nonplanar PBHs. Hence, the observed regularities and the proposed analysis contribute to a deeper understanding of the behavior of PBHs and form the foundation for design strategies for new functional PBHs.

A Paradigm Shift from 2D to 3D: Surface Supramolecular Assemblies and Their Electronic Properties Explored by Scanning Tunneling Microscopy and Spectroscopy

Exploring supramolecular architectures at surfaces plays an increasingly important role in contemporary science, especially for molecular electronics. A paradigm of research interest in this context is shifting from 2D to 3D that is expanding from monolayer, bilayers, to multilayers. Taking advantage of its high-resolution insight into monolayers and a few layers, scanning tunneling microscopy/spectroscopy (STM/STS) turns out a powerful tool for analyzing such thin films on a solid surface. This review summarizes the representative efforts of STM/STS studies of layered supramolecular assemblies and their unique electronic properties, especially at the liquid-solid interface. The superiority of the 3D molecular networks at surfaces is elucidated and an outlook on the challenges that still lie ahead is provided. This review not only highlights the profound progress in 3D supramolecular assemblies but also provides researchers with unusual concepts to design surface supramolecular structures with increasing complexity and desired functionality.

Zwitterionic Bergman cyclization triggered polymerization gives access to metal-graphene nanoribbons using a boron metal couple

With the rapid growth in artificial intelligence, designing high-speed and low-power semiconducting materials is of utmost importance. This investigation provides a theoretical basis to access covalently bonded transition metal-graphene nanoribbon (TM-GNR) hybrid semiconductors whose DFT-computed bandgaps were much narrower than the commonly used pentacene. Systematic optimization of substrates containing remotely placed boryl groups and the transition metals produced the zwitterions via ionic Bergman cyclization (i-BC) and unlocked the polymerization of metal-substituted polyenynes. Aside from i-BC, the subsequent steps were barrierless, which involved structureless transition regions. Multivariate analysis revealed the strong dependence of activation energy and the cyclization mode on the electronic nature of boron and Au(I). Consequently, three regions corresponding to radical Bergman (r-BC), ionic Bergman (i-BC), and ionic Schreiner-Pascal (i-SP) cyclizations were identified. The boundaries between these regions corresponded to the mechanistic shift induced by the three-center-three-electron (3c-3e) hydrogen bond, three-center-four-electron (3c-4e) hydrogen bond, and vacant p-orbital on boron. The ideal combination for cascade polymerization was observed near the boundary between i-BC and i-SP.

Edge-Decorated Polycyclic Aromatic Hydrocarbons by an Oxidative Coupling Approach

Oxidative phenol coupling reduces reliance on halo/metalated substrates used in conventional redox neutral couplings. A new strategy for constructing polycyclic aromatic hydrocarbons (PAHs) that incorporates oxidative phenol coupling is outlined in a three-stage approach: oxidative fragment coupling, linking of the two resultant units, and oxidative cyclization. The protocol allows rapid assembly of both planar and helical systems with a high degree of edge functionalization. The incorporation of 12 alkoxy groups on systems with 12 rings gave rise to lower optical gaps compared to systems with a lesser degree of edge functionalization.

Synthesis of precisely functionalizable curved nanographenes via graphitization-induced regioselective chlorination in a mechanochemical Scholl Reaction

While the synthesis of nanographenes has advanced greatly in the past few years, development of their atomically precise functionalization strategies remains rare. The ability to modify the carbon scaffold translates to controlling, adjusting, and adapting molecular properties. Towards this end, here, we show that mechanochemistry is capable of transforming graphitization precursors directly into chlorinated curved nanographenes through a Scholl reaction. The halogenation occurs in a regioselective, high-yielding, and general manner. Density Functional Theory (DFT) calculations suggest that graphitization activates specific edge-positions for chlorination. The chlorine atoms allow for precise chemical modification of the nanographenes through a Suzuki or a nucleophilic aromatic substitution reaction. The edge modification enables modulation of material properties. Among the molecules prepared, corannulene-coronene hybrids and laterally fully π-extended helicenes, heptabenzo[5]superhelicenes, are particularly noteworthy.

Selective Electrochemical Synthesis of 9-Aryl-10-sulfonyl Substituted Phenanthrene from Alkynes and Sulfonyl Hydrazides

An efficient electrochemical synthesis of sulfonated phenanthrenes via the reaction of internal alkynes with sulfonyl hydrazides has been established. The protocol does not require a metal catalyst or external oxidants, providing a green and mild route to functionalized phenanthrenes. Moreover, the compatibility of various functional groups and decagram-scale experimental conditions demonstrate the practicality of the electrochemical strategy.

Theoretical Study on Non-Linear Optics Properties of Polycyclic Aromatic Hydrocarbons and the Effect of Their Intercalation with Carbon Nanotubes

Results of a theoretical study devoted to comparing NLO (non-linear optics) responses of derivatives of tetracene, isochrysene, and pyrene are reported. The static hyperpolarizability β, the dipole moment μ, the HOMO and LUMO orbitals, and their energy gap were calculated using the CAM-B3LYP density functional combined with the cc-pVDZ basis set. The para-disubstituted NO₂-tetracene-N(CH₃)₂ has the highest NLO response, which is related to a large intramolecular charge transfer. Adding vinyl groups to the para-disubstituted NO₂-tetracene-N(CH₃)₂ results in an increase in the NLO responses. We further investigated the effect of the intercalation of various push-pull molecules inside an armchair single-walled carbon nanotube. The intercalation leads to increased NLO responses, something that depends critically on the position of the guest molecule and/or on functionalization of the nanotube by donor and attractor groups.

Precise heteroatom doping determines aqueous solubility and self-assembly behaviors for polycyclic aromatic skeletons

Developing effective strategies to improve the hydrophilicity or aqueous solubility of hydrophobic molecular scaffolds is meaningful for both academic research and industrial applications. Herein, we demonstrate that stepwise and precise N/O heteroatoms doping on a polycyclic aromatic skeleton can gradually alter these structures from hydrophobic to hydrophilic, even resulting in excellent aqueous solubility. The Hansen solubility parameters (HSP) method shows that the three partial solubility parameters are closely related to N/O doping species, numbers and positions on the molecular panel. The hydrogen bonding solubility parameter indicates that the hydrogen bonding interactions between N/O doped molecules and water play a key role in enhancing hydrophilicity. Moreover, three optimized water-soluble molecules underwent a self-assembly process to form stable nanoparticles in water, thus facilitating better hydrogen bonding interactions disclosed by HSP calculations, NMR and single crystal X-ray analysis. These ensembles even show quasi-solid properties in water from NMR and luminescence perspectives.

Triangular Topological 2D Covalent Organic Frameworks Constructed via Symmetric or Asymmetric "Two-in-One" Type Monomers

Most of the reported covalent organic frameworks (COFs) so far are prepared from highly symmetric building blocks, which to some extent limits the expansion of COF diversity and complexity. Low-symmetric building blocks can be designed through a desymmetrized vertex strategy, which might be used to construct new topological COFs. But reports of COFs constructed by asymmetric building blocks are thus far very rare. Here, a feasible strategy to design asymmetric building blocks for COF synthesis is introduced, by simply varying the positions of functional groups in the monomer. As a proof of concept, two isomeric hexaphenylbenzene-based "two-in-one" type monomers (1,2,4-HPB-NH₂ and 1,3,5-HPB-NH₂ ) are designed and synthesized. To the authors' surprise, self-polycondensation of the asymmetric 1,2,4-HPB-NH₂ (i.e., the isomer of common C₃ -symmetric 1,3,5-HPB-NH₂ ) also affords highly crystalline COF (1,2,4-HPB-COF) similar to the symmetric 1,3,5-HPB-NH₂ counterpart with identical topological structure. The triangular porous structures of both HPB-based COFs are well resolved by powder X-ray diffraction (PXRD), theoretical simulations, nitrogen sorption, and morphologies analysis. This work demonstrates the "two-in-one" type asymmetric building blocks can also produce highly crystalline frameworks and thus provides a new structural design strategy for reticular chemistry.

Virtual Screening for Organic Solar Cells and Light Emitting Diodes

The field of organic semiconductors is multifaceted and the potentially suitable molecular compounds are very diverse. Representative examples include discotic liquid crystals, dye-sensitized solar cells, conjugated polymers, and graphene-based low-dimensional materials. This huge variety not only represents enormous challenges for synthesis but also for theory, which aims at a comprehensive understanding and structuring of the plethora of possible compounds. Eventually computational methods should point to new, better materials, which have not yet been synthesized. In this perspective, it is shown that the answer to this question rests upon the delicate balance between computational efficiency and accuracy of the methods used in the virtual screening. To illustrate the fundamentals of virtual screening, chemical design of non-fullerene acceptors, thermally activated delayed fluorescence emitters, and nanographenes are discussed.

Potential sensing of toxic chemical warfare agents (CWAs) by twisted nanographenes: A first principle approach

The toxic chemical warfare agents (CWAs) are extremely harmful to the living organisms. Their efficient detection and removal in a limited time span are essential for the human health and environmental security. Twisted nanographenes have great applications in the fields of energy storage and optoelectronics, but their use as sensors is rarely described. Therefore, we have explored the sensitivity and selectivity of twisted nanographene analogues (C₃₂H₁₆, C₆₄H₃₂) towards selected toxic CWAs, including phosgene, thiophosgene and formaldehyde. The interaction between CWAs and twisted nanographenes is mainly interpreted by considering the optimized geometries, adsorption energies, natural bond orbital (NBO), frontier molecular orbital (FMO), non-covalent interaction (NCI) and quantum theory of atoms in molecules (QTAIM) analyses. The structural geometries show that the central octagon of twisted nanographenes is the most favorable site of interaction. The interaction energies reveal the physisorption of selected CWAs on tNGs surface. The average energy gap change (%E_H-L^a) and % sensitivity are quantitatively determined to evaluate the sensing capability of the twisted nanographenes. Among the selected CWAs molecules, the sensitivity of tNG analogues (C₃₂H₁₆ and C₆₄H₃₂) is superior towards thiophosgene (ThP), which is revealed by the high interaction energies of -8.19 and - 12.17 kcal/mol, respectively. This theoretical study will help experimentalists to devise novel sensors based on twisted nanographenes for the detection of toxic CWAs which may also work efficiently under the humid conditions.

Metal-catalysed C-H bond activation and borylation

Transition metal-catalysed direct borylation of hydrocarbons via C-H bond activation has received a remarkable level of attention as a popular reaction in the synthesis of organoboron compounds owing to their synthetic versatility. While controlling the site-selectivity was one of the most challenging issues in these C-H borylation reactions, enormous efforts of several research groups proved instrumental in dealing with selectivity issues that presently reached an impressive level for both proximal and distal C-H bond borylation reactions. For example, in the case of ortho C-H bond borylation reactions, innovative methodologies have been developed either by the modification of the directing groups attached with the substrates or by creating new catalytic systems via the design of new ligand frameworks. Whereas meta and para selective C-H borylations remained a formidable challenge, numerous innovative concepts have been developed within a very short period of time by the development of new catalytic systems with the employment of various noncovalent interactions. Moreover, significant advancements have occurred for aliphatic C(sp³)-H borylations as well as enantioselective borylations. In this review article, we aim to discuss and summarize the different approaches and findings related to the development of directed proximal ortho, distal meta/para, aliphatic (racemic and enantioselective) borylation reactions since 2014. Additionally, considering the C-H borylation reaction as one of the most important mainstream reactions, various applications of this C-H borylation reaction toward the synthesis of natural products, therapeutics, and applications in materials chemistry will be summarized in the last part of this review article.

Rapid Access to Hydroxyfluoranthenes via a Domino Suzuki-Miyaura/Intramolecular Diels-Alder/Ring-Opening Reactions Sequence

In this work, we developed an efficient method for the rapid construction of fluoranthene skeleton to access a variety of substituted hydroxyfluoranthenes. The 1-iodo-8-alkynylnaphthalene derivatives, which serve as substrates for the key fluoranthene-forming step, were prepared via selective monoalkynylative Sonogashira reactions of 1,8-diiodonaphthalene. The domino reaction sequence which involves a sequential Suzuki–Miyaura coupling, an intramolecular Diels–Alder reaction, and an aromatization-driven ring-opening isomerization has been shown to give substituted hydroxyfluoranthenes in up to 92% yield. This work demonstrates the utility of designing new domino reactions for rapid access to substituted polycyclic aromatic hydrocarbons (PAHs).

Straightforward One-Pot Synthesis of New 4-Phenyl-1,2,5,6-tetraazafluoranthen-3(2H)-one Derivatives: X-ray Single Crystal Structure and Hirshfeld Analyses

A straightforward one-pot route for the synthesis of a new 4-phenyl-1,2,5,6-tetraazafluoranthen-3(2H)-one is reported form the direct hydrazinolysis of triketo ester and hydrazine hydrate in ethanol. 4-Phenyl-1,2,5,6-tetraazafluoranthen-3(2H)-one was subjected to aza-Michael addition and N-alkylation on reaction with a set of alkylating agents in the presence of K2CO3. Hydrazinolysis of 4-phenyl-1,2,5,6-tetraazafluoranthen-3(2H)-one ester to hydrazide and conversion of hydrazide to thiosemicarbazide were successful. X-Ray single crystals analysis and 1H, 13C NMR were used for unambiguous structure confirmation. The O…H, N…H, C…N and C…C in 2, and the N…H, C…N, C…C, C…O and H…H interactions in 6 are the most important in the molecular packing based on Hirshfled analysis. Moreover, the presence of short C…C and C…N contacts in both compounds revealed the presence of π–π stacking interactions.

Synthesis of cationic π-extended imidazolium salts by sequential Cu-catalyzed arylation/annulation and photocyclization

A series of cationic π-extended imidazolium salts were synthesized by a sequential Cu-catalyzed arylation/annulation and photocyclization strategy in a simple but efficient way. Among them, a nine-fused-ring compound with a doubly aza[5]helical geometry is by far the largest cationic polycyclic heteroaromatic with a central imidazolium core.

Laser-Induced Electronic and Vibronic Dynamics in the Pyrene Molecule and Its Cation

Among polycyclic aromatic hydrocarbons, pyrene is widely used as an optical probe thanks to its peculiar ultraviolet absorption and infrared emission features. Interestingly, this molecule is also an abundant component of the interstellar medium, where it is detected via its unique spectral fingerprints. In this work, we present a comprehensive first-principles study on the electronic and vibrational response of pyrene and its cation to ultrafast, coherent pulses in resonance with their optically active excitations in the ultraviolet region. The analysis of molecular symmetries, electronic structure, and linear optical spectra is used to interpret transient absorption spectra and kinetic energy spectral densities computed for the systems excited by ultrashort laser fields. By disentangling the effects of the electronic and vibrational dynamics via ad hoc simulations with stationary and moving ions, and, in specific cases, with the aid of auxiliary model systems, we rationalize that the nuclear motion is mainly harmonic in the neutral species, while strong anharmonic oscillations emerge in the cation, driven by electronic coherence. Our results provide additional insights into the ultrafast vibronic dynamics of pyrene and related compounds and set the stage for future investigations on more complex carbon-conjugated molecules.

Four-Step Domino Reaction Enables Fully Controlled Non-Statistical Synthesis of Hexaarylbenzene with Six Different Aryl Groups*

Hexaarylbenzene (HAB) derivatives are versatile aromatic systems playing a significant role as chromophores, liquid crystalline materials, molecular receptors, molecular-scale devices, organic light-emitting diodes and candidates for organic electronics. Statistical synthesis of simple symmetrical HABs is known via cyclotrimerization or Diels-Alder reactions. By contrast, the synthesis of more complex, asymmetrical systems, and without involvement of statistical steps, remains an unsolved problem. Here we present a generally applicable synthetic strategy to access asymmetrical HAB via an atom-economical and high-yielding metal-free four-step domino reaction using nitrostyrenes and α,α-dicyanoolefins as easily available starting materials. Resulting domino product-functionalized triarylbenzene (TAB)-can be used as a key starting compound to furnish asymmetrically substituted hexaarylbenzenes in high overall yield and without involvement of statistical steps. This straightforward domino process represents a distinct approach to create diverse and still unexplored HAB scaffolds, containing six different aromatic rings around central benzene core.

Scholl reaction as a powerful tool for the synthesis of nanographenes: a systematic review

Nanographenes, or extended polycyclic aromatic hydrocarbons, have been attracting increasing attention owing to their widespread applications in organic electronics. However, the atomically precise fabrication of nanographenes has thus far been achieved only through synthetic organic chemistry. Polycyclic aromatic hydrocarbons (PAHs) are popular research subjects due to their high stability, rigid planar structure, and characteristic optical spectra. The recent discovery of graphene, which can be regarded as giant PAH, has further stimulated research interest in this area. Chemists working with nanographene and heterocyclic analogs thereof have chosen it as their preferred tool for the assembly of large and complex architectures. The Scholl reaction has maintained significant relevance in contemporary organic synthesis with many advances in recent years and now ranks among the most useful C-C bond-forming processes for the generation of the π-conjugated frameworks of nanographene or their heterocyclic analogs. A broad range of oxidants and Lewis acids have found use in Scholl-type processes, including Cu(OTf)2/AlCl3, FeCl3, MoCl5, PIFA/BF3-Et2O, and DDQ, in combination with Brønsted or Lewis acids, and the surface-mediated reaction has found especially wide applications in PAH synthesis. Undoubtedly, the utility of the Scholl reaction is supreme in the construction of nanographene and their heterocyclic analogues. The detailed analysis of the progress achieved in this field reveals that many groups have contributed by pushing the boundary of structural possibilities, expanding into surface-assisted cyclodehydrogenation and developing new reagents. In this review, we highlight and discuss the recent modifications in the Scholl reaction for nanographene synthesis using numerous oxidant systems. In addition, the merits or demerits of each oxidative reagent is described herein.

Synthesis of bent-shaped π-extended thienoacenes from 2,5-distannylated 3,4-dialkynethiophene

Bent-shaped thienoacenes show promise as next-generation organic semiconductors. Here we present the synthesis of an air-stable, pure and easily scalable thiophene precursor, 2,5-distannylated-3,4-dialkyne thiophene, starting from 3,4-dialkyne thiophene in quantitative yields. This precursor has been used for the synthesis of a versatile class of syn-thienoacenes comprising up to 13 fused rings, helical acenes and donor-acceptor acenes.

Ir-Catalyzed Cycloaddition of Tribenzocyclyne with Biphenylenes

We demonstrate that Ir-catalyzed C-C bond activation in biphenylenes followed by a reaction with tribenzocyclyne is a suitable method for synthesizing strained and unknown monoadducts with the tetradehydrotetrabenzo[a,c,e,i]cyclododecene scaffold ([12]annulenes). Modification of reaction conditions also furnished [12]annulene products with cis and/or trans double bonds formed by hydrogen transfer. The [9]annulene side product was formed upon the reaction of the benzyl radical with tribenzocyclyne during the Bergman cyclization. All isolated compounds were fully characterized by HRMS, NMR, and X-ray diffraction analysis.

Diversity-oriented synthesis of nanographenes enabled by dearomative annulative π-extension

Nanographenes and polycyclic aromatic hydrocarbons (PAHs) are among the most important classes of compounds, with potential applications in nearly all areas of science and technology. While the theoretically possible number of nanographene structures is extraordinary, most of these molecules remain synthetically out of reach due to a lack of programmable and diversity-oriented synthetic methods, and their potentially huge structure-property diversity has not been fully exploited. Herein we report a diversity-oriented, growth-from-template synthesis of nanographenes enabled by iterative annulative π-extension (APEX) reactions from small PAH starting materials. The developed dearomative annulative π-extension (DAPEX) reaction enables π-elongation at the less-reactive M-regions of PAHs, and is successfully combined with complementary APEX reactions that occur at K- and bay-regions to access a variety of previously untapped nanographenes.

Nanographenes and polycyclic aromatic hydrocarbons (PAHs) are important classes of compounds with numerous applications, but challenging to access due to a lack of programmable and diversity-oriented methods. Here, the authors report a diversity-oriented, growth-from-template synthesis of nanographenes enabled by iterative annulative π-extension reactions from small PAH starting materials.

Butterfly-like Shape Liquid Crystals Based Fused-Thiophene as Unidimensional Ambipolar Organic Semiconductors with High Mobility

Mesomorphous butterfly-like shape molecules based on benzodithiophene, benzodithiophene-4,8-dione and cyclopentadithiophen-4-one core moieties were efficiently synthesized by the Suzuki-Miyaura coupling and Scholl oxidative cyclo-dehydrogenation reactions' tandem. Most of the butterfly molecules spontaneously self-organize into columnar hexagonal mesophase. The electron-deficient systems possess strong solvent-gelling ability but are not luminescent, whereas the electron-rich terms do not form gels but strongly emit light between 400 and 600 nm. The charge carrier mobility was also measured by time-of-flight transient photocurrent technique in the mesophases for some of the compounds. They display hole-transport performances with positive charge mobility in the 10^-3  cm^-2  V^-1  s^-1 range, consistent with the high degree of ordering and stability of the columnar superstructures. In particular, the mesogen with a benzodithiophen-4,8-dione core shows ambipolar charge carrier transport with both high electron (μ_e =6.6×10^-3  cm^-2  V^-1  s^-1 ) and hole (μ_h =4.5×10^-3  cm^-2  V^-1  s^-1 ) mobility values.

Revisiting Acepleiadylene: Two-Step Synthesis and π-Extension toward Nonbenzenoid Nanographene

Acepleiadylene (APD), a nonbenzenoid nonalternant isomer of pyrene, exhibits different electronic properties from pyrene, but has been rarely studied since its first synthesis in 1956, probably due to the difficulties in synthesis and further derivatization. In this work, we revisited this long-known compound and developed a new two-step synthetic route to efficiently access APD on the gram scale. Theoretical and experimental characterizations elucidated the unique properties of APD as compared with its benzenoid isomer pyrene, particularly revealing its dipolar structure with a narrow optical gap. The functionalization of APD was demonstrated for the first time, providing doubly brominated APD as a key precursor for further π-extension. As a proof of concept, a π-extended APD and a cyclotrimer nanographene (C₄₈H₂₄) were constructed, opening up new avenues to nonbenzenoid nanographenes with low HOMO-LUMO gaps.

Toward Zigzag-edged Helical Nanographene Based on [7]Helicene

Due to their unique chemical and physical properties, zigzag-edged nanographenes have attracted increasing interest in recent years. Herein, a novel zigzag-edged nanographene (6) containing a [7]helicene subunit was designed and synthesized. However, because of the high reactivities of zigzag edges, compound 1 with a diketone structure was obtained owing to the oxidation of 6. The helical carbon skeleton of 1 is unambiguously revealed by single-crystal X-ray crystallography analysis. The photophysical properties of the precursor and helical diketone 1 are studied by UV-vis absorption spectroscopy. The electrochemical property of 1 is investigated by cyclic voltammetry, which was further studied by density functional theory (DFT) calculations (ΔE_g ^Cal =2.94 eV). The work reported here not only represents the synthesis of an unprecedented [7]helicene-embedded nanographene, but also provides the possibility for the synthesis of helical nanographenes with rich zigzag edges.

Synthesis and derivatization of hetera-buckybowls

Buckybowls have concave and convex surfaces with distinct π-electron cloud distribution, and consequently they show unique structural and electronic features as compared to planar aromatic polycycles. Doping the π-framework of buckybowls with heteroatoms is an efficient scheme to tailor inherent properties, because the nature of heteroatoms plays a pivotal role in the structural and electronic characteristics of the resulting hetera-buckybowls. The design, synthesis, and derivatization of hetera-buckybowls open an avenue for obtaining fascinating organic entities not only of fundamental importance but also of promising applications in optoelectronics. In this review, we summarize the advances in hetera-buckybowl chemistry, particularly the synthetic strategies toward these scaffolds.

Recent advances in cascade radical cyclization of radical acceptors for the synthesis of carbo- and heterocycles

This review is devoted to highlighting main achievements in the development of cascade radical cyclization of radical acceptors for the synthesis of carbo- and heterocycles.

Intermolecular Oxidative Friedel-Crafts Reaction Triggered Ring Expansion Affording 9,10-Diarylphenanthrenes

A novel intermolecular tandem oxidative aromatic coupling between arylidene fluorenes and unfunctionalized aromatics mediated by a DDQ/TFA oxidation system has been developed for the construction of 9,10-diarylphenanthrenes (DAPs). The formation of a benzylic carbocation species possessing a quaternary sp³-carbon center on the fluorene moiety by an intermolecular oxidative Friedel-Crafts reaction of two different arenes successfully triggered the subsequent ring expansion to afford DAPs.

Synthetic Tailoring of Graphene Nanostructures with Zigzag-Edged Topologies: Progress and Perspectives

Experimental and theoretical investigations have revealed that the chemical and physical properties of graphene are crucially determined by their topological structures. Therefore, the atomically precise synthesis of graphene nanostructures is essential. A particular example is graphene nanostructures with zigzag-edged structures, which exhibit unique (opto)electronic and magnetic properties owing to their spin-polarized edge state. Recent progress in the development of synthetic methods and strategies as well as characterization methods has given access to this class of unprecedented graphene nanostructures, which used to be purely molecular objectives in theoretical chemistry. Thus, clear insight into the structure-property relationships has become possible as well as new applications in organic carbon-based electronic and spintronic devices. In this Minireview, we discuss the recent progress in the controlled synthesis of zigzag-edged graphene nanostructures with different topologies through a bottom-up synthetic strategy.

On-surface synthesis of planar acenes via regioselective aryl-aryl coupling

The reaction of 2,2'-dibromo-biphenyl on a Ag(111) surface leads to the formation of planar acenes with a high-regioselectivity rather than nonplanar saddle-shaped tetraphenylene as the typical product in solution chemistry. The regioselective aryl-aryl coupling reaction is attributed to the hydrogen repulsion between the reactants on the confined two-dimensional surface.