Enamel structure properties controlled by engineered proteins in transgenic mice

Multi-resolution Correlative Ultrastructural and Chemical Analysis of Carious Enamel by Scanning Microscopy and Tomographic Imaging

Caries, a major global disease associated with dental enamel demineralization, remains insufficiently understood to devise effective prevention or minimally invasive treatment. Understanding the ultrastructural changes in enamel is hampered by a lack of nanoscale characterization of the chemical spatial distributions within the dental tissue. This leads to the requirement to develop techniques based on various characterization methods. The purpose of the present study is to demonstrate the strength of analytic methods using a correlative technique on a single sample of human dental enamel as a specific case study to test the accuracy of techniques to compare regions in enamel. The science of the different techniques is integrated to genuinely study the enamel. The hierarchical structures within carious tissue were mapped using the combination of focused ion beam scanning electron microscopy with synchrotron X-ray tomography. The chemical changes were studied using scanning X-ray fluorescence (XRF) and X-ray wide-angle and small-angle scattering using a beam size below 80 nm for ångström and nanometer length scales. The analysis of XRF intensity gradients revealed subtle variations of Ca intensity in carious samples in comparison with those of normal mature enamel. In addition, the pathways for enamel rod demineralization were studied using X-ray ptychography. The results show the chemical and structural modification in carious enamel with differing locations. These results reinforce the need for multi-modal approaches to nanoscale analysis in complex hierarchically structured materials to interpret the changes of materials. The approach establishes a meticulous correlative characterization platform for the analysis of biomineralized tissues at the nanoscale, which adds confidence in the interpretation of the results and time-saving imaging techniques. The protocol demonstrated here using the dental tissue sample can be applied to other samples for statistical study and the investigation of nanoscale structural changes. The information gathered from the combination of methods could not be obtained with traditional individual techniques.

Minimal amelogenin domain for enamel formation

Amelogenin is the most abundant matrix protein guiding hydroxyapatite formation in enamel, the durable bioceramic tissue that covers vertebrate teeth. Here, we sought to refine structure-function for an amelogenin domain based on in vitro data showing a 42 amino acid amelogenin-derived peptide (ADP7) mimicked formation of hydroxyapatite similar to that observed for the full-length mouse 180 amino acid protein. In mice, we used CRISPR-Cas9 to express only ADP7 by the native amelogenin promoter. Analysis revealed ADP7 messenger RNA expression in developing mouse teeth with the formation of a thin layer of enamel. In vivo, ADP7 peptide partially replaced the function of the full-length amelogenin protein and its several protein isoforms. Protein structure-function relationships identified through in vitro assays can be deployed in whole model animals using CRISPR-Cas9 to validate function of a minimal protein domain to be translated for clinical use as an enamel biomimetic.

A unique mineralization mode of hypermineralized pleromin in the tooth plate of Chimaera phantasma contributes to its microhardness

Tooth plates of the chimaeroids, holocephalian fishes, are unique dental hard tissues. Unlike the teeth of other animals, the tooth plates are located on the roof of the mouth and in the lower jaw. Their tooth plates consist, to a large extent, of lightly mineralized tissue (osteodentin) and hypermineralized tissue (pleromin). Notably, the mineral phase of pleromin is whitlockite, while that of other animals is apatite. Dietary habits of chimaeroids and wearing features of their tooth plates suggest an extreme hardness of pleromin, but this has never been investigated. We examined the microhardness of the tooth plate of Chimaera phantasma and found that pleromin in the biting region was extremely hard, comparable with the hardness of mature tooth enamel, whereas the hardness of immature pleromin was lower than that of bovine dentin. The hardness of osteodentin, on the other hand, was equivalent to that of bovine dentin and almost the same throughout the tooth plate. Immature pleromin was sparsely packed with oval crystals of whitlockite and, as pleromin matures, the space between crystals was filled with small intercrystalline materials. The maturing process of pleromin could partly contribute to its remarkable hardness and have some implications for designing novel biomaterials.

Tissue Engineering and Regenerative Medicine 2019: The Role of Biofabrication-A Year in Review

Despite its relative youth, biofabrication is unceasingly expanding by assimilating the contributions from various disciplinary areas and their technological advances. Those developments have spawned the range of available options to produce structures with complex geometries while accurately manipulating and controlling cell behavior. As it evolves, biofabrication impacts other research fields, allowing the fabrication of tissue models of increased complexity that more closely resemble the dynamics of living tissue. The recent blooming and evolutions in biofabrication have opened new windows and perspectives that could aid the translational struggle in tissue engineering and regenerative medicine (TERM) applications. Based on similar methodologies applied in past years' reviews, we identified the most high-impact publications and reviewed the major concepts, findings, and research outcomes in the context of advancement beyond the state-of-the-art in the field. We first aim to clarify the confusion in terminology and concepts in biofabrication to therefore introduce the striking evolutions in three-dimensional and four-dimensional bioprinting of tissues. We conclude with a short discussion on the future outlooks for innovation that biofabrication could bring to TERM research.

Surface analysis of etched enamel modified during the prenatal period

Structural changes in the enamel surface subjected to induced demineralization and assessment of the influence of prenatal administration of β-hydroxy β-methylbutyrate (HMB) on enamel resistance were investigated. The examination was conducted on five sets of teeth from one-day-old spiny mice (Acomys cahirinus), one from the control and four from the experimental groups. Surface structure, molecular arrangement and crystalline organization of offspring's enamel both before and after etching were studied. Obtained results revealed that the physical and molecular arrangements of enamel were altered after the prenatal supplementation, and significantly affected its final structure and resistance against acid action. The enamel of incisors from the offspring which mothers were supplemented with HMB in a high dose (0.2 g/kg_bw) and in the late period of gestation (26th-39th day) showed the highest endurance against acid treatment demonstrating only vestigial changes in their surface structure after acid action. Comparing to the remaining experimental groups, it was characterized by a reduced roughness and fractal dimension, significantly lower degree of demineralization and simultaneous lack of notable differences in the Raman spectra before and after acid etching. The results suggest that an increased enamel resiliency was the effect of a relatively high degree of mineralization and higher organization of the surface.

Early Caries in an In Vivo Model: Structural and Nanomechanical Characterization

The utilization of rat models in cariology research has made substantial contributions to decipher mechanisms of caries formation and to develop preventive treatments. The existing rat models still have potential for improvement toward establishing a more accurate standard caries protocol to utilize in testing and/or developing new dental technologies. The current caries-scoring methods rely on optical microscopy-based techniques, which necessitates formation of highly advanced lesions. Moreover, models that facilitate the implementation of cariogenic bacteria by shifting the balance of oral flora through desalivation and/or antibiotic treatment create a nonnatural environment. Furthermore, there is a paucity of detailed structural and mechanical characterization on the resulting carious lesions. The purpose of this study was to develop a rat model that induces formation of mild carious lesions and to provide comprehensive structural and mechanical characterization. With this aim in mind, an in vivo model promoting progression of mild lesions was established with specific pathogen-free Sprague-Dawley rats. Cariogenic bacteria, Streptococcus mutans, was implemented into the oral flora without the use of antibiotics or desalivation surgery. During caries formation, progression of the infection was monitored by quantifying the relative abundance of S. mutans in oral flora with quantitative real-time polymerase chain reaction. A significant increase in colonization efficacy of S. mutans was detected during cariogenic challenge ( P < 0.01). The resulting carious lesions were analyzed by conventional light optical and scanning electron microscopy. A detailed structural and morphological characterization on fissure caries with different degrees of severity was provided. The changes in the morphology and demineralization state of the sound and carious tissues were quantified by energy-dispersive X-ray spectroscopy, and local mechanical properties were acquired with nanoindentation. The principles laid out in this work can be utilized in cariology research and developed into a standard protocol for future studies.

DENTAL ENAMEL FORMATION AND IMPLICATIONS FOR ORAL HEALTH AND DISEASE

Dental enamel is the hardest and most mineralized tissue in extinct and extant vertebrate species and provides maximum durability that allows teeth to function as weapons and/or tools as well as for food processing. Enamel development and mineralization is an intricate process tightly regulated by cells of the enamel organ called ameloblasts. These heavily polarized cells form a monolayer around the developing enamel tissue and move as a single forming front in specified directions as they lay down a proteinaceous matrix that serves as a template for crystal growth. Ameloblasts maintain intercellular connections creating a semi-permeable barrier that at one end (basal/proximal) receives nutrients and ions from blood vessels, and at the opposite end (secretory/apical/distal) forms extracellular crystals within specified pH conditions. In this unique environment, ameloblasts orchestrate crystal growth via multiple cellular activities including modulating the transport of minerals and ions, pH regulation, proteolysis, and endocytosis. In many vertebrates, the bulk of the enamel tissue volume is first formed and subsequently mineralized by these same cells as they retransform their morphology and function. Cell death by apoptosis and regression are the fates of many ameloblasts following enamel maturation, and what cells remain of the enamel organ are shed during tooth eruption, or are incorporated into the tooth's epithelial attachment to the oral gingiva. In this review, we examine key aspects of dental enamel formation, from its developmental genesis to the ever-increasing wealth of data on the mechanisms mediating ionic transport, as well as the clinical outcomes resulting from abnormal ameloblast function.

Prenatally administered HMB modifies the enamel surface roughness in spiny mice offspring: An atomic force microscopy study

OBJECTIVE

The aim of this research was to check the effect of the prenatally administered β-hydroxy β-methylbutyrate (HMB) on the development of enamel surface of the spiny mice offspring.

DESIGN

The spiny mice dams were randomly assigned into three groups: control group (not supplemented with HMB) and two experimental groups in which powdered HMB was given at the daily dosage of 0.2g/kg of body weight (group I) and 0.02g/kg of body weight (group II) during the last period of gestation. Newborn pups were euthanized by CO₂ inhalation. The morphology of incisor teeth was analysed using atomic force microscopy (AFM) in semi-contact mode in the height, magnitude and phase domains. Height images became a basis for determination of surface roughness parameters.

RESULTS

Conducted study indicated that maternal HMB administration markedly influences enamel development. Enamel of offspring's teeth in both experimental groups was characterized by significantly smaller values of indices describing surface roughness and profile. HMB supplementation influenced the calculated parameters regardless of the diet type and offspring sex, however higher dose of HMB caused stronger changes in enamel surface's physical properties and could be observed in higher intensity in the male group.

CONCLUSIONS

HMB administration caused reduction in the irregularities of enamel surface, thereby possibly reducing the probability of bacteria adhesion and caries development. These observations may serve to improve nutrition and supplementation of animals and could be a lead for further research.

Amyloid-like ribbons of amelogenins in enamel mineralization

Enamel, the outermost layer of teeth, is an acellular mineralized tissue that cannot regenerate; the mature tissue is composed of high aspect ratio apatite nanocrystals organized into rods and inter-rod regions. Amelogenin constitutes 90% of the protein matrix in developing enamel and plays a central role in guiding the hierarchical organization of apatite crystals observed in mature enamel. To date, a convincing link between amelogenin supramolecular structures and mature enamel has yet to be described, in part because the protein matrix is degraded during tissue maturation. Here we show compelling evidence that amelogenin self-assembles into an amyloid-like structure in vitro and in vivo. We show that enamel matrices stain positive for amyloids and we identify a specific region within amelogenin that self-assembles into β-sheets. We propose that amelogenin nanoribbons template the growth of apatite mineral in human enamel. This is a paradigm shift from the current model of enamel development.

Protein Interaction between Ameloblastin and Proteasome Subunit α Type 3 Can Facilitate Redistribution of Ameloblastin Domains within Forming Enamel

Enamel is a bioceramic tissue composed of thousands of hydroxyapatite crystallites aligned in parallel within boundaries fabricated by a single ameloblast cell. Enamel is the hardest tissue in the vertebrate body; however, it starts development as a self-organizing assembly of matrix proteins that control crystallite habit. Here, we examine ameloblastin, a protein that is initially distributed uniformly across the cell boundary but redistributes to the lateral margins of the extracellular matrix following secretion thus producing cell-defined boundaries within the matrix and the mineral phase. The yeast two-hybrid assay identified that proteasome subunit α type 3 (Psma3) interacts with ameloblastin. Confocal microscopy confirmed Psma3 co-distribution with ameloblastin at the ameloblast secretory end piece. Co-immunoprecipitation assay of mouse ameloblast cell lysates with either ameloblastin or Psma3 antibody identified each reciprocal protein partner. Protein engineering demonstrated that only the ameloblastin C terminus interacts with Psma3. We show that 20S proteasome digestion of ameloblastin in vitro generates an N-terminal cleavage fragment consistent with the in vivo pattern of ameloblastin distribution. These findings suggest a novel pathway participating in control of protein distribution within the extracellular space that serves to regulate the protein-mineral interactions essential to biomineralization.

Biomineralization of a self-assembled-, soft-matrix precursor: Enamel

Enamel is the bioceramic covering of teeth, a composite tissue composed of hierarchical organized hydroxyapatite crystallites fabricated by cells under physiologic pH and temperature. Enamel material properties resist wear and fracture to serve a lifetime of chewing. Understanding the cellular and molecular mechanisms for enamel formation may allow a biology-inspired approach to material fabrication based on self-assembling proteins that control form and function. Genetic understanding of human diseases expose insight from Nature's errors by exposing critical fabrication events that can be validated experimentally and duplicated in mice using genetic engineering to phenocopy the human disease so that it can be explored in detail. This approach led to assessment of amelogenin protein self-assembly which, when altered, disrupts fabrication of the soft enamel protein matrix. A misassembled protein matrix precursor results in loss of cell to matrix contacts essential to fabrication and mineralization.

Amelogenin in Enamel Tissue Engineering

In this chapter the basic premises, the recent findings and the future challenges in the use of amelogenin for enamel tissue engineering are being discoursed on. Results emerging from the experiments performed to assess the fundamental physicochemical mechanisms of the interaction of amelogenin, the main protein of the enamel matrix, and the growing crystals of apatite, are mentioned, alongside a moderately comprehensive literature review of the subject at hand. The clinical importance of understanding this protein/mineral interaction at the nanoscale are highlighted as well as the potential for tooth enamel to act as an excellent model system for studying some of the essential aspects of biomineralization processes in general. The dominant paradigm stating that amelogenin directs the uniaxial growth of apatite crystals in enamel by slowing down the growth of (hk0) faces on which it adheres is being questioned based on the results demonstrating the ability of amelogenin to promote the nucleation and crystal growth of apatite under constant titration conditions designed to mimic those present in the developing enamel matrix. The role of numerous minor components of the enamel matrix is being highlighted as essential and impossible to compensate for by utilizing its more abundant ingredients only. It is concluded that the three major aspects of amelogenesis outlined hereby--(1) the assembly of amelogenin and other enamel matrix proteins, (2) the proteolytic activity, and (3) crystallization--need to be in precise synergy with each other in order for the grounds for the proper imitation of amelogenesis in the lab to be created.

Analysis of enamel development using murine model systems: approaches and limitations

A primary goal of enamel research is to understand and potentially treat or prevent enamel defects related to amelogenesis imperfecta (AI). Rodents are ideal models to assist our understanding of how enamel is formed because they are easily genetically modified, and their continuously erupting incisors display all stages of enamel development and mineralization. While numerous methods have been developed to generate and analyze genetically modified rodent enamel, it is crucial to understand the limitations and challenges associated with these methods in order to draw appropriate conclusions that can be applied translationally, to AI patient care. We have highlighted methods involved in generating and analyzing rodent enamel and potential approaches to overcoming limitations of these methods: (1) generating transgenic, knockout, and knockin mouse models, and (2) analyzing rodent enamel mineral density and functional properties (structure and mechanics) of mature enamel. There is a need for a standardized workflow to analyze enamel phenotypes in rodent models so that investigators can compare data from different studies. These methods include analyses of gene and protein expression, developing enamel histology, enamel pigment, degree of mineralization, enamel structure, and mechanical properties. Standardization of these methods with regard to stage of enamel development and sample preparation is crucial, and ideally investigators can use correlative and complementary techniques with the understanding that developing mouse enamel is dynamic and complex.

Review of research on the mechanical properties of the human tooth

‘Bronze teeth' reflect the mechanical properties of natural teeth to a certain extent. Their mechanical properties resemble those of a tough metal, and the gradient of these properties lies in the direction from outside to inside. These attributes confer human teeth with effective mastication ability. Understanding the various mechanical properties of human teeth and dental materials is the basis for the development of restorative materials. In this study, the elastic properties, dynamic mechanical properties (visco-elasticity) and fracture mechanical properties of enamel and dentin were reviewed to provide a more thorough understanding of the mechanical properties of human teeth.

The role of bioactive nanofibers in enamel regeneration mediated through integrin signals acting upon C/EBPα and c-Jun

Enamel formation involves highly orchestrated intracellular and extracellular events; following development, the tissue is unable to regenerate, making it a challenging target for tissue engineering. We previously demonstrated the ability to trigger enamel differentiation and regeneration in the embryonic mouse incisor using a self-assembling matrix that displayed the integrin-binding epitope RGDS (Arg-Gly-Asp-Ser). To further elucidate the intracellular signaling pathways responsible for this phenomenon, we explore here the coupling response of integrin receptors to the biomaterial and subsequent downstream gene expression profiles. We demonstrate that the artificial matrix activates focal adhesion kinase (FAK) to increase phosphorylation of both c-Jun N-terminal kinase (JNK) and its downstream transcription factor c-Jun (c-Jun). Inhibition of FAK blocked activation of the identified matrix-mediated pathways, while independent inhibition of JNK nearly abolished phosphorylated-c-Jun (p-c-Jun) and attenuated the pathways identified to promote enamel regeneration. Cognate binding sites in the amelogenin promoter were identified to be transcriptionally up-regulated in response to p-c-Jun. Furthermore, the artificial matrix induced gene expression as evidenced by an increased abundance of amelogenin, the main protein expressed during enamel formation, and the CCAAT enhancer binding protein alpha (C/EBPα), which is the known activator of amelogenin expression. Elucidating these cues not only provides guidelines for the design of synthetic regenerative strategies and opportunities to manipulate pathways to regulate enamel regeneration, but can provide insight into the molecular mechanisms involved in tissue formation.

Perturbed Amelogenin Protein Self-assembly Alters Nanosphere Properties Resulting in Defective Enamel Formation

Dental enamel is a unique composite bioceramic material that is the hardest tissue in the vertebrate body, containing long-, thin-crystallites of substituted hydroxyapatite. Enamel functions under immense loads in a bacterial-laden environment, and generally without catastrophic failure over a lifetime for the organism. Unlike all other biogenerated hard tissues of mesodermal origin, such as bone and dentin, enamel is produced by ectoderm-derived cells called ameloblasts. Recent investigations on the formation of enamel using cell and molecular approaches have been coupled to biomechanical investigations at the nanoscale and mesoscale levels. For amelogenin, the principle protein of forming enamel, two domains have been identified that are required for the proper assembly of multimeric units of amelogenin to form nanospheres. One domain is at the amino-terminus and the other domain in the carboxyl-terminal region. Amelogenin nanospheres are believed to influence the hydroxyapatite crystal habit. Both the yeast two-hybrid assay and surface plasmon resonance have been used to examine the assembly properties of engineered amelogenin proteins. Amelogenin protein was engineered using recombinant DNA techniques to contain deletions to either of the two self-assembly domains. Amelogenin protein was also engineered to contain single amino-acid mutations/substitutions in the amino-terminal self-assembly domain; and these amino-acid changes are based upon point mutations observed in humans affected with a hereditary disturbance of enamel formation. All of these alterations reveal significant defects in amelogenin self-assembly into nanospheres in vitro. Transgenic animals containing these same amelogenin deletions illustrate the importance of a physiologically correct bio-fabrication of the enamel protein extracellular matrix to allow for the organization of the enamel prismatic structure.

A simplified genetic design for mammalian enamel

A biomimetic replacement for tooth enamel is urgently needed because dental caries is the most prevalent infectious disease to affect man. Here, design specifications for an enamel replacement material inspired by Nature are deployed for testing in an animal model. Using genetic engineering we created a simplified enamel protein matrix precursor where only one, rather than dozens of amelogenin isoforms, contributed to enamel formation. Enamel function and architecture were unaltered, but the balance between the competing materials properties of hardness and toughness was modulated. While the other amelogenin isoforms make a modest contribution to optimal biomechanical design, the enamel made with only one amelogenin isoform served as a functional substitute. Where enamel has been lost to caries or trauma a suitable biomimetic replacement material could be fabricated using only one amelogenin isoform, thereby simplifying the protein matrix parameters by one order of magnitude.

Prospects and Pits on the Path of Biomimetics: The case of tooth enamel

This review presents a discourse on challenges in understanding and imitating the process of amelogenesis in vitro on the molecular scale. In light of the analysis of imitation of the growth of dental enamel, it also impends on the prospects and potential drawbacks of the biomimetic approach in general. As the formation of enamel proceeds with the protein matrix guiding the crystal growth, while at the same time conducting its own degradation and removal, it is argued that three aspects of amelogenesis need to be induced in parallel: a) crystal growth; b) protein assembly; c) proteolytic degradation. A particular emphasis is therefore placed on ensuring conditions for proteolysis-coupled protein-guided crystallization to occur. Discussed are structural and functional properties of the protein species involved in amelogenesis, mainly amelogenin and enamelysin, the main protein and the protease of the developing enamel matrix, respectively. A model of enamel growth based on controlled delivery of constituent ions or crystalline or amorphous building blocks by means of amelogenin is proposed. The importance of high viscosity of the enamel matrix and a more intricate role that water may play in such a gelatinous medium are also touched upon. The tendency of amelogenin to self-assemble into fibrous and rod-shaped morphologies is considered as potentially important in explaining the formation of elongated apatite crystals. The idea that a preassembling protein matrix serves as a template for the uniaxial growth of apatite crystals in enamel is finally challenged with the one based on co-assembly of the protein and the mineral phases.

Biological synthesis of tooth enamel instructed by an artificial matrix

The regenerative capability of enamel, the hardest tissue in the vertebrate body, is fundamentally limited due to cell apoptosis following maturation of the tissue. Synthetic strategies to promote enamel formation have the potential to repair damage, increase the longevity of teeth and improve the understanding of the events leading to tissue formation. Using a self-assembling bioactive matrix, we demonstrate the ability to induce ectopic formation of enamel at chosen sites adjacent to a mouse incisor cultured in vivo under the kidney capsule. The resulting material reveals the highly organized, hierarchical structure of hydroxyapatite crystallites similar to native enamel. This artificially triggered formation of organized mineral demonstrates a pathway for developing cell fabricated materials for treatment of dental caries, the most ubiquitous disease in man. Additionally, the artificial matrix provides a unique tool to probe cellular mechanisms involved in tissue formation further enabling the development of tooth organ replacements.

Consequences for enamel development and mineralization resulting from loss of function of ameloblastin or enamelin

Although the nonamelogenin proteins, ameloblastin and enamelin, are both low-abundance and rapidly degrading components of forming enamel, they seem to serve essential developmental functions, as suggested by findings that an enamel layer fails to appear on teeth of mice genetically engineered to produce either a truncated form of ameloblastin (exons 5 and 6 deleted) or no enamelin at all (null). The purpose of this study was to characterize, by direct micro weighing, changes in enamel mineralization occurring on maxillary and mandibular incisors of mice bred for these alterations in nonamelogenin function (Ambn(+/+, +/-5,6, -5,6/-5,6), Enam(+/+, +/- ,-/-)). The results indicated similar changes to enamel-mineralization patterns within the altered genotypes, including significant decreases by as much as 50% in the mineral content of maturing enamel from heterozygous mice and the formation of a thin, crusty, and disorganized mineralized layer, rather than true enamel, on the labial (occlusal) surfaces of incisors and molars along with ectopic calcifications within enamel organ cells in Ambn(-5,6/-5,6) and Enam(-/-) homozygous mice. These findings confirm that both ameloblastin and enamelin are required by ameloblasts to create an enamel layer by appositional growth as well as to assist in achieving its unique high level of mineralization.

Disturbed enamel biomineralization in col1-caPPR mouse incisor

During the mineralization process of enamel, gene expression controls the activities of ameloblasts, the secretion and assembly of an extracellular protein matrix, affecting the final structure and functions. In this study, the enamel in the maxillary and mandibular incisors of wild-type and transgenic (col1-caPPR) mice, in which a constitutively active PTH/PTHrP receptor (PPR) was targeted to osteoblastic cells, was observed by scanning electron microscopy (SEM), Fourier transform infrared microscopy (FTIRM), and nanoindentation. The SEM studies showed that several different patterns of aberrations in crystal arrangement, disturbed prism organization without decussation, as well as abnormal enamel distribution were encountered in transgenic enamel. FTIRM analysis revealed poorer crystallinity/maturity after mutation. Nanoindentation measurement disclosed that transgenic enamel had 24.6% lower hardness and 12.3% lower elastic modulus. We attributed the inferior properties to the loosely packing crystals and abnormal prism organization. Furthermore, the col1-caPPR mouse model was substantiated to be useful to study how genes modulate the biomineralization process.

Structure and mechanical properties of Ank/Ank mutant mouse dental tissues--an animal model for studying periodontal regeneration

Enamel, dentine and cementum are dental tissues with distinct functional properties associated with their unique hierarchical structures. Some potential ways to repair or regenerate lost tooth structures have been revealed in our studies focused on examining teeth obtained from mice with mutations at the mouse progressive ankylosis (ank) locus. Previous studies have shown that mice with such mutations have decreased levels of extracellular inorganic pyrophosphate (PP(i)) at local sites resulting in ectopic calcification in joint areas and in formation of a significantly thicker cementum layer when compared with age-matched wild-type (WT) tissue [Ho AM, Johnson MD, Kingsley DM. Role of the mouse ank gene in control of tissue calcification and arthritis. Science 2000;289:265-70; Nociti Jr FH, Berry JE, Foster BL, Gurley KA, Kingsley DM, Takata T, et al. Cementum: a phosphate-sensitive tissue. J Dent Res 2002;81:817-21]. As a next step, to determine the quality of the cementum tissue formed in mice with a mutation in the ank gene (ank/ank), we compared the microstructure and mechanical properties of cementum and other dental tissues in mature ank/ank vs. age-matched WT mice. Backscattered scanning electron microscopy (SEM) imaging and transmission electron microscopy (TEM) analyses on mineralized tissues revealed no decrease in the extent of mineralization between ank/ank cementum vs. WT controls. Atomic-force-microscopy-based nanoindentation performed on enamel, dentine or cementum of ank/ank vs. age-matched WT molars revealed no significant difference in any of the tested tissues in terms of hardness and elastic modulus. These results indicate that the tissue quality was not compromised in ank/ank mice despite faster rate of formation and more abundant cementum when compared with age-matched WT mice. In conclusion, these data suggest that this animal model can be utilized for studies focused on defining mechanisms to promote cementum formation without loss of mechanical integrity.

Partial rescue of the amelogenin null dental enamel phenotype

The amelogenins are the most abundant secreted proteins in developing dental enamel. Enamel from amelogenin (Amelx) null mice is hypoplastic and disorganized, similar to that observed in X-linked forms of the human enamel defect amelogenesis imperfecta resulting from amelogenin gene mutations. Both transgenic strains that express the most abundant amelogenin (TgM180) have relatively normal enamel, but strains of mice that express a mutated amelogenin (TgP70T), which leads to amelogenesis imperfecta in humans, have heterogeneous enamel structures. When Amelx null (KO) mice were mated with transgenic mice that produce M180 (TgM180), the resultant TgM180KO offspring showed evidence of rescue in enamel thickness, mineral density, and volume in molar teeth. Rescue was not observed in the molars from the TgP70TKO mice. It was concluded that a single amelogenin protein was able to significantly rescue the KO phenotype and that one amino acid change abrogated this function during development.

Nanomechanical Properties of Tooth and Bone Revealed by Nanoindentation and AFM

In this paper, an overview on nanoindentation and its combination with AFM is presented with regard to current instrument technology and applications on dental and bony tissues. Nanoindentation has been a widely used technique to determine the mechanical properties such as nanohardness and Young’s modulus for nanostructured materials. Especially, atomic force microscopy (AFM) combined with nanoindentation, with the pit positions controlled accurately, become a powerful technique used to measure mechanical properties of materials on the nanoscale, and has been applied to the study of biological hard tissues, such as bone and tooth. Examples will be shown that significantly different nanohardness and modulus in the isolated domains within single enamel, the prisms, interprisms, the surrounding sheaths and the different parts of skeletal bone, could been distinguished, while such information was unable to be obtained by traditional methods of mechanical measurements.

Buonocore Memorial Lecture

For many years, operative dentistry has been using regenerative approaches to treat dental disease. The use of calcium hydroxide to stimulate reparative or reactionary dentin is clearly an example of such a therapeutic strategy. The advent of tissue engineering is allowing dentistry to move forward in the use of regeneration as an underlying principle for the treatment of dental disease. Tissue engineering is a multi-disciplinary science that brings together biology, engineering and clinical sciences with developing new tissues and organs. It is based on fundamental principles that involve the identification of appropriate cells, the development of conducive scaffolds and an understanding of the morphogenic signals required to induce cells to regenerate the tissues that were lost. This review is focused on the presentation and discussion of existing literature that covers the engineering of enamel, dentin and pulp, as well on the engineering of entire teeth. There are clearly major roadblocks to overcome before such strategies move to the clinic and are used regularly to treat patients. However, existing evidence strongly suggests that the engineering of new dental structures to replace tissues lost during the process of caries or trauma will have a place in the future of operative dentistry.

Altering biomineralization by protein design

To create a bioceramic with unique materials properties, biomineralization exploits cells to create a tissue-specific protein matrix to control the crystal habit, timing, and position of the mineral phase. The biomineralized covering of vertebrate teeth is enamel, a distinctive tissue of ectodermal origin that is collagen-free. In forming enamel, amelogenin is the abundant protein that undergoes self-assembly to contribute to a matrix that guides its own replacement by mineral. Conserved domains in amelogenin suggest their importance to biomineralization. We used gene targeting in mice to replace native amelogenin with one of two engineered amelogenins. Replacement changed enamel organization by altering protein-to-crystallite interactions and crystallite stacking while diminishing the ability of the ameloblast to interact with the matrix. These data demonstrate that ameloblasts must continuously interact with the developing matrix to provide amelogenin-specific protein to protein, protein to mineral, and protein to membrane interactions critical to biomineralization and enamel architecture while suggesting that mutations within conserved amelogenin domains could account for enamel variations preserved in the fossil record.

Tooth developmental biology: disruptions to enamel-matrix assembly and its impact on biomineralization

Dental enamel is a composite bioceramic material that is the hardest tissue in the vertebrate body, containing long, thin crystallites of substituted hydroxyapatite (HAP). Over a lifetime of an organism, enamel functions under repeated and immense loads, generally without catastrophic failure. Enamel is a product of ectoderm-derived cells called ameloblasts. Recent investigations on the formation of enamel using cell and molecular approaches are now being coupled to biomechanical investigations at the nanoscale and mesoscale levels. For amelogenin, the principal structural protein for forming enamel, we have identified two domains that are required for its proper self-assembly into supramolecular structures referred to as nanospheres. Nanospheres are believed to control HAP crystal habit. Other structural proteins of the enamel matrix include ameloblastin and enamelin, but little is known about their biological importance. Transgenic animals have been prepared to investigate the effect of overexpression of wild-type or mutated enamel proteins on the developing enamel matrix. Amelogenin transgenes were engineered to contain deletions to either of the two self-assembly domains and these alterations produced significant defects in the enamel. Additional transgenic animal lines have been prepared and studied and each gives additional insights into the mechanisms for enamel biofabrication. This study summarizes the observed enamel phenotypes of recently derived transgenic animals. These data are being used to help define the role of each of the enamel structural proteins in enamel and study how each of these proteins impact on enamel biomineralization.

TGF-beta regulates the mechanical properties and composition of bone matrix

The characteristic toughness and strength of bone result from the nature of bone matrix, the mineralized extracellular matrix produced by osteoblasts. The mechanical properties and composition of bone matrix, along with bone mass and architecture, are critical determinants of a bone's ability to resist fracture. Several regulators of bone mass and architecture have been identified, but factors that regulate the mechanical properties and composition of bone matrix are largely unknown. We used a combination of high-resolution approaches, including atomic-force microscopy, x-ray tomography, and Raman microspectroscopy, to assess the properties of bone matrix independently of bone mass and architecture. Properties were evaluated in genetically modified mice with differing levels of TGF-beta signaling. Bone matrix properties correlated with the level of TGF-beta signaling. Smad3+/- mice had increased bone mass and matrix properties, suggesting that the osteopenic Smad3-/- phenotype may be, in part, secondary to systemic effects of Smad3 deletion. Thus, a reduction in TGF-beta signaling, through its effector Smad3, enhanced the mechanical properties and mineral concentration of the bone matrix, as well as the bone mass, enabling the bone to better resist fracture. Our results provide evidence that bone matrix properties are controlled by growth factor signaling.