Design for fully steerable dual-trap optical tweezers

Separation-dependent near-field effects in Mie scattering spectra of two optically trapped aerosol droplets

The backscattering of ultraviolet and visible light by a model organic (squalane) aerosol droplet (1.0 Collapse

Key Words Collapse

MESH Headings Collapse

Grants Collapse

Affiliation(s) Collapse

Zero-order free holographic optical tweezers

Holographic optical tweezers (HOTs) use spatial light modulators (SLM) to modulate light beams, thereby enabling the dynamic control of optical trap arrays with complex intensity and phase distributions. This has provided exciting new opportunities for cell sorting, microstructure machining, and studying single molecules. However, the pixelated structure of the SLM will inevitably bring up the unmodulated zero-order diffraction possessing an unacceptably large fraction of the incident light beam power. This is harmful to optical trapping because of the bright, highly localized nature of the errant beam. In this paper and to address this issue, we construct a cost-effective, zero-order free HOTs apparatus, thanks to a homemade asymmetric triangle reflector and a digital lens. As there is no zero-order diffraction, the instrument performs excellently in generating complex light fields and manipulating particles.

Deep learning for precise axial localization of trapped microspheres in reflective optical systems

High-precision axial localization measurement is an important part of micro-nanometer optical measurement, but there have been issues such as low calibration efficiency, poor accuracy, and cumbersome measurement, especially in reflected light illumination systems, where the lack of clarity of imaging details leads to the low accuracy of commonly used methods. Herein, we develop a trained residual neural network coupled with a convenient data acquisition strategy to address this challenge. Our method improves the axial localization precision of microspheres in both reflective illumination systems and transmission illumination systems. Using this new localization method, the reference position of the trapped microsphere can be extracted from the identification results, namely the "positioning point" among the experimental groups. This point relies on the unique signal characteristics of each sample measurement, eliminates systematic repeatability errors when performing identification across samples, and improves the localization precision of different samples. This method has been verified on both transmission and reflected illumination optical tweezers platforms. We will bring greater convenience to measurements in solution environments and will provide higher-order guarantees for force spectroscopy measurements in scenarios such as microsphere-based super-resolution microscopy and the surface mechanical properties of adherent flexible materials and cells.

Optical trapping with holographically structured light for single-cell studies

A groundbreaking work in 1970 by Arthur Ashkin paved the way for developing various optical trapping techniques. Optical tweezers have become an established method for the manipulation of biological objects, due to their noninvasiveness and precise controllability. Recent innovations are accelerating and now enable single-cell manipulation through holographic light structuring. In this review, we provide an overview of recent advances in optical tweezer techniques for studies at the individual cell level. Our review focuses on holographic optical tweezers that utilize active spatial light modulators to noninvasively manipulate live cells. The versatility of the technology has led to valuable integrations with microscopy, microfluidics, and biotechnological techniques for various single-cell studies. We aim to recapitulate the basic principles of holographic optical tweezers, highlight trends in their biophysical applications, and discuss challenges and future prospects.

Cilia function as calcium-mediated mechanosensors that instruct left-right asymmetry

The breaking of bilateral symmetry in most vertebrates is critically dependent upon the motile cilia of the embryonic left-right organizer (LRO), which generate a directional fluid flow; however, it remains unclear how this flow is sensed. Here, we demonstrated that immotile LRO cilia are mechanosensors for shear force using a methodological pipeline that combines optical tweezers, light sheet microscopy, and deep learning to permit in vivo analyses in zebrafish. Mechanical manipulation of immotile LRO cilia activated intraciliary calcium transients that required the cation channel Polycystin-2. Furthermore, mechanical force applied to LRO cilia was sufficient to rescue and reverse cardiac situs in zebrafish that lack motile cilia. Thus, LRO cilia are mechanosensitive cellular levers that convert biomechanical forces into calcium signals to instruct left-right asymmetry.

Optical tweezers across scales in cell biology

Optical tweezers (OT) provide a noninvasive approach for delivering minute physical forces to targeted objects. Controlling such forces in living cells or in vitro preparations allows for the measurement and manipulation of numerous processes relevant to the form and function of cells. As such, OT have made important contributions to our understanding of the structures of proteins and nucleic acids, the interactions that occur between microscopic structures within cells, the choreography of complex processes such as mitosis, and the ways in which cells interact with each other. In this review, we highlight recent contributions made to the field of cell biology using OT and provide basic descriptions of the physics, the methods, and the equipment that made these studies possible.

Synergistic action in colloidal heat engines coupled by non-conservative flows

Colloidal heat engines are model systems to analyze mechanisms of transduction of heat to work at the mesoscale. While engines developed hitherto were realized using conservative potentials and operated in isolation, biological micromotors - their real counterparts - seldom perform under such simplifications. Here, we examine thermodynamics beyond such idealizations by constructing a pair of engines from two colloidal microspheres in optical traps at close separation. We demonstrate that at such proximity, non-conservative scattering forces that were hitherto neglected affect the particle motion. Hydrodynamics generated while dissipating these are hindered by the microsphere in the adjacent trap and energy that was otherwise rejected into the medium gets reused. Thus, despite being in contact with the same reservoir, the particles are driven out of equilibrium and can exchange energy, allowing cooperative behavior. Leveraging this in a manner analogous to microswimmers and active Brownian particles that utilize such flows to enhance propulsion, we construct two colloidal engines in close proximity. To estimate thermodynamic quantities, we develop a minimal model that is appropriate in the asymptotic limit and is similar to active Brownian particles. While complete theoretical frameworks to understand such scenarios remain to be developed, results based on our model demonstrate the intuitive idea that a pair of Stirling engines at close proximity outperform those that are well separated. Although these results explore the simplest case of two Stirling engines, the concepts unraveled could aid in designing larger collections akin to biological systems.

Colloidal transport in twisted lattices of optical tweezers

We simulate the transport of colloidal particles driven by a static and homogeneous drift force, and subject to the optical potential created by two lattices of optical tweezers. The lattices of optical tweezers are parallel to each other, shifted, and rotated by a twist angle. Due to a negative interference between the potential of the two lattices, flat channels appear in the total optical potential. At specific twist angles, known as magic angles, the flat channels percolate the entire system and the colloidal particles can then be transported using a weak external drift force. We characterize the transport in both square and hexagonal lattices of twisted optical tweezers.

In Situ Sol-Gel Synthesis of Unique Silica Structures Using Airborne Assembly: Implications for In-Air Reactive Manufacturing

Optical trapping enables the real-time manipulation and observation of morphological evolution of individual particles during reaction chemistry. Here, optical trapping was used in combination with Raman spectroscopy to conduct airborne assembly and kinetic experiments. Micro-droplets of alkoxysilane were levitated in air prior to undergoing either acid- or base-catalyzed sol-gel reaction chemistry to form silica particles. The evolution of the reaction was monitored in real-time; Raman and Mie spectroscopies confirmed the in situ formation of silica particles from alkoxysilane droplets as the product of successive hydrolysis and condensation reactions, with faster reaction kinetics in acid catalysis. Hydrolysis and condensation were accompanied by a reduction in droplet volume and silica formation. Two airborne particles undergoing solidification could be assembled into unique 3D structures such as dumb-bell shapes by manipulating a controlled collision. Our results provide a pipeline combining spectroscopy with optical microscopy and nanoscale FIB-SEM imaging to enable chemical and structural insights, with the opportunity to apply this methodology to probe structure formation during reactive inkjet printing.

Mie scattering from optically levitated mixed sulfuric acid-silica core-shell aerosols: observation of core-shell morphology for atmospheric science

Sulfuric acid is shown to form a core-shell particle on a micron-sized, optically-trapped spherical silica bead. The refractive indices of the silica and sulfuric acid, along with the shell thickness and bead radius were determined by reproducing Mie scattered optical white light as a function of wavelength in Mie spectroscopy. Micron-sized silica aerosols (silica beads were used as a proxy for atmospheric silica minerals) were levitated in a mist of sulfuric acid particles; continuous collection of Mie spectra throughout the collision of sulfuric acid aerosols with the optically trapped silica aerosol demonstrated that the resulting aerosol particle had a core-shell morphology. Contrastingly, the collision of aqueous sulfuric acid aerosols with optically trapped polystyrene aerosol resulted in a partially coated system. The light scattering from the optically levitated aerosols was successfully modelled to determine the diameter of the core aerosol (±0.003 μm), the shell thickness (±0.0003 μm) and the refractive index (±0.007). The experiment demonstrated that the presence of a thin film rapidly changed the light scattering of the original aerosol. When a 1.964 μm diameter silica aerosol was covered with a film of sulfuric acid 0.287 μm thick, the wavelength dependent Mie peak positions resembled sulfuric acid. Thus mineral aerosol advected into the stratosphere would likely be coated with sulfuric acid, with a core-shell morphology, and its light scattering properties would be effectively indistinguishable from a homogenous sulfuric acid aerosol if the film thickness was greater than a few 100 s of nm for UV-visible wavelengths.

Frequency comb enhanced Brillouin microscopy

Brillouin light scattering (BLS) microscopy is a well established and powerful technique to study acoustic and magnetic excitations in the frequency domain with sub-micron spatial resolution. Many other spectroscopic techniques have benefited from the introduction of femtosecond laser sources to optically pump and stimulate the sample under investigation. In BLS microscopy, the use of femtosecond lasers as the excitation source introduces several challenges, primarily since the measured frequency shift is small and the signal levels are weak due to the low duty cycle of typical femtosecond lasers. Here we present a method to evade these challenges. A strong enhancement of the weak scattering amplitude on selected modes is observed by pumping the sample with a high repetition rate frequency comb laser source. The laser beam can be focused to the diffraction limit, providing a micron pumping area. We can thus preserve the innate high frequency and spatial resolution of BLS microscopy. Furthermore, we are able to induce a point-like source of mode-selected elementary excitations which propagate away from the pumping spot. We conclude that we have demonstrated frequency comb pumped BLS microscopy as an attractive tool for studies of ultrafast induced laser dynamics directly in the frequency domain.

Propagation dynamics of Janus vortex waves

We study the propagation dynamics of Janus vortex wave under the action of a focusing lens based upon the formula of focused circular vortex Airy beams. Two dark foci would be generated under the action of a lens, and thus a perfect light hollow bottle could be formed. By controlling corresponding parameters, we could control the focal position and the relative intensity between the two focal intensities. The off-axis optical vortex (OV) would rotate rapidly in two focal regions, but keep still in the lens focus region. The angular displacement of OV in each focusing process is nearly π/2. (Note that the angular displacement for an off-axis OV in single focusing process of Gaussian beam is nearly π.) Two same OVs would repel to each other, but two opposite OVs would attract each other and annihilate at first focus plane in Janus vortex waves.

1064 nm Dispersive Raman Microspectroscopy and Optical Trapping of Pharmaceutical Aerosols

Raman spectroscopy is a powerful tool for investigating chemical composition. Coupling Raman spectroscopy with optical microscopy (Raman microspectroscopy) and optical trapping (Raman tweezers) allows microscopic length scales and, hence, femtolitre volumes to be probed. Raman microspectroscopy typically uses UV/visible excitation lasers, but many samples, including organic molecules and complex tissue samples, fluoresce strongly at these wavelengths. Here we report the development and application of dispersive Raman microspectroscopy designed around a near-infrared continuous wave 1064 nm excitation light source. We analyze microparticles (1-5 μm diameter) composed of polystyrene latex and from three real-world pressurized metered dose inhalers (pMDIs) used in the treatment of asthma: salmeterol xinafoate (Serevent), salbutamol sulfate (Salamol), and ciclesonide (Alvesco). For the first time, single particles are captured, optically levitated, and analyzed using the same 1064 nm laser, which permits a convenient nondestructive chemical analysis of the true aerosol phase. We show that particles exhibiting overwhelming fluorescence using a visible laser (514.5 nm) can be successfully analyzed with 1064 nm excitation, irrespective of sample composition and irradiation time. Spectra are acquired rapidly (1-5 min) with a wavelength resolution of 2 nm over a wide wavenumber range (500-3100 cm^-1). This is despite the microscopic sample size and low Raman scattering efficiency at 1064 nm. Spectra of individual pMDI particles compare well to bulk samples, and the Serevent pMDI delivers the thermodynamically preferred crystal form of salmeterol xinafoate. 1064 nm dispersive Raman microspectroscopy is a promising technique that could see diverse applications for samples where fluorescence-free characterization is required with high spatial resolution.

Direct measurement of cortical force generation and polarization in a living parasite

Apicomplexa is a large phylum of intracellular parasites that are notable for the diseases they cause, including toxoplasmosis, malaria, and cryptosporidiosis. A conserved motile system is critical to their life cycles and drives directional gliding motility between cells, as well as invasion of and egress from host cells. However, our understanding of this system is limited by a lack of measurements of the forces driving parasite motion. We used a laser trap to measure the function of the motility apparatus of living Toxoplasma gondii by adhering a microsphere to the surface of an immobilized parasite. Motion of the microsphere reflected underlying forces exerted by the motile apparatus. We found that force generated at the parasite surface begins with no preferential directionality but becomes directed toward the rear of the cell after a period of time. The transition from nondirectional to directional force generation occurs on spatial intervals consistent with the lateral periodicity of structures associated with the membrane pellicle and is influenced by the kinetics of actin filament polymerization and cytoplasmic calcium. A lysine methyltransferase regulates both the magnitude and polarization of the force. Our work provides a novel means to dissect the motile mechanisms of these pathogens.

Introduction to Optical Tweezers

Thirty years after their invention by Arthur Ashkin and colleagues at Bell Labs in 1986 [1], optical tweezers (or traps) have become a versatile tool to address numerous biological problems. Put simply, an optical trap is a highly focused laser beam that is capable of holding and applying forces to micron-sized dielectric objects. However, their development over the last few decades has converted these tools from boutique instruments into highly versatile instruments of molecular biophysics. This introductory chapter intends to give a brief overview of the field, highlight some important scientific achievements, and demonstrate why optical traps have become a powerful tool in the biological sciences. We introduce a typical optical setup, describe the basic theoretical concepts of how trapping forces arise, and present the quantitative position and force measurement techniques that are most widely used today.

Developments in spontaneous and coherent Raman scattering microscopic imaging for biomedical applications

First, the potential role of Raman-based techniques in biomedicine is introduced. Second, an overview about the instrumentation for spontaneous and coherent Raman scattering microscopic imaging is given with a focus of recent developments. Third, imaging strategies are summarized including sequential registration with laser scanning microscopes, line imaging and global or wide-field imaging. Finally, examples of biomedical applications are presented in the context of single cells, laser tweezers, tissue sections, biopsies and whole animals.

Optical disassembly of cellular clusters by tunable 'tug-of-war' tweezers

Bacterial biofilms underlie many persistent infections, posing major hurdles in antibiotic treatment. Here we design and demonstrate 'tug-of-war' optical tweezers that can facilitate the assessment of cell-cell adhesion-a key contributing factor to biofilm development, thanks to the combined actions of optical scattering and gradient forces. With a customized optical landscape distinct from that of conventional tweezers, not only can such 'tug-of-war' tweezers stably trap and stretch a rod-shaped bacterium in the observing plane, but, more importantly, they can also impose a tunable lateral force that pulls apart cellular clusters without any tethering or mechanical movement. As a proof of principle, we examined a Sinorhizobium meliloti strain that forms robust biofilms and found that the strength of intercellular adhesion depends on the growth medium. This technique may herald new photonic tools for optical manipulation and biofilm study, as well as other biological applications.

Time-shared optical tweezers with a microlens array for dynamic microbead arrays

Dynamic arrays of microbeads and cells offer great flexibility and potential as platforms for sensing and manipulation applications in various scientific fields, especially biology and medicine. Here, we present a simple method for assembling and manipulating dense dynamic arrays based on time-shared scanning optical tweezers with a microlens array. Three typical examples, including the dynamic and simultaneous bonding of microbeads in real-time, are demonstrated. The optical design and the hardware setup for our approach are also described.

Tracking of colloids close to contact

The precise tracking of micron sized colloidal particles - held in the vicinity of each other using optical tweezers - is an elegant way to gain information about the particle-particle pair interaction potential. The accuracy of the method, however, relies strongly on the tracking precision. Particularly the elimination of systematic errors in the position detection due to overlapping particle diffraction patterns remains a great challenge. Here we propose a template based particle finding algorithm that circumvents these problems by tracking only a fraction of the particle image that is insignificantly affected by nearby colloids. Under realistic experimental conditions we show that our algorithm significantly reduces systematic errors compared to standard tracking methods. Moreover our approach should in principle be applicable to almost arbitrary shaped particles as the template can be adapted to any geometry.

Controlling dispersion forces between small particles with artificially created random light fields

Appropriate combinations of laser beams can be used to trap and manipulate small particles with optical tweezers as well as to induce significant optical binding forces between particles. These interaction forces are usually strongly anisotropic depending on the interference landscape of the external fields. This is in contrast with the familiar isotropic, translationally invariant, van der Waals and, in general, Casimir–Lifshitz interactions between neutral bodies arising from random electromagnetic waves generated by equilibrium quantum and thermal fluctuations. Here we show, both theoretically and experimentally, that dispersion forces between small colloidal particles can also be induced and controlled using artificially created fluctuating light fields. Using optical tweezers as a gauge, we present experimental evidence for the predicted isotropic attractive interactions between dielectric microspheres induced by laser-generated, random light fields. These light-induced interactions open a path towards the control of translationally invariant interactions with tuneable strength and range in colloidal systems.

Natural dispersion forces acting between molecules and particles arise from electromagnetic fields generated by quantum and thermal fluctuations. Here, Brügger et al. show that isotropic dispersion forces between colloidal particles can be induced, controlled and tuned with artificial, fluctuating laser light fields.

Entrainment of heterogeneous glycolytic oscillations in single cells

Cell signaling, gene expression, and metabolism are affected by cell-cell heterogeneity and random changes in the environment. The effects of such fluctuations on cell signaling and gene expression have recently been studied intensively using single-cell experiments. In metabolism heterogeneity may be particularly important because it may affect synchronisation of metabolic oscillations, an important example of cell-cell communication. This synchronisation is notoriously difficult to describe theoretically as the example of glycolytic oscillations shows: neither is the mechanism of glycolytic synchronisation understood nor the role of cell-cell heterogeneity. To pin down the mechanism and to assess its robustness and universality we have experimentally investigated the entrainment of glycolytic oscillations in individual yeast cells by periodic external perturbations. We find that oscillatory cells synchronise through phase shifts and that the mechanism is insensitive to cell heterogeneity (robustness) and similar for different types of external perturbations (universality).

Design of a high-quality optical conjugate structure in optical tweezers

We propose an approach to realize a high-quality optical conjugate of a piezo-driven mirror (PM) in optical tweezers. Misalignments between the optical beam and the steering center of the PM are analyzed mathematically. The decentrations in different directions cause different changes, either a position change of the conjugate plane or a spot variation of the beam during PM steering. On the other hand, these misalignment-introduced problems provide the information to check the assembling errors. Thus a wanted conjugate plane of the PM can be effectively and precisely achieved according to the detection signals. This approach is also available to deal with multifactor coupling error. At the end, the procedure for error analysis is given by testing homebuilt optical tweezers.

Probing the micro-rheological properties of aerosol particles using optical tweezers

The use of optical trapping techniques to manipulate probe particles for performing micro-rheological measurements on a surrounding fluid is well-established. Here, we review recent advances made in the use of optical trapping to probe the rheological properties of trapped particles themselves. In particular, we review observations of the continuous transition from liquid to solid-like viscosity of sub-picolitre supersaturated solution aerosol droplets using optical trapping techniques. Direct measurements of the viscosity of the particle bulk are derived from the damped oscillations in shape following coalescence of two particles, a consequence of the interplay between viscous and surface forces and the capillary driven relaxation of the approximately spheroidal composite particle. Holographic optical tweezers provide a facile method for the manipulation of arrays of particles allowing coalescence to be controllably induced between two micron-sized aerosol particles. The optical forces, while sufficiently strong to confine the composite particle, are several orders of magnitude weaker than the capillary forces driving relaxation. Light, elastically back-scattered by the particle, is recorded with sub-100 ns resolution allowing measurements of fast relaxation (low viscosity) dynamics, while the brightfield image can be used to monitor the shape relaxation extending to times in excess of 1000 s. For the slowest relaxation dynamics studied (particles with the highest viscosity) the presence and line shape of whispering gallery modes in the cavity enhanced Raman spectrum can be used to infer the relaxation time while serving the dual purpose of allowing the droplet size and refractive index to be measured with accuracies of ±0.025% and ±0.1%, respectively. The time constant for the damped relaxation can be used to infer the bulk viscosity, spanning from the dilute solution limit to a value approaching that of a glass, typically considered to be >10(12) Pa s, whilst the frequencies of the normal modes of the oscillations of the particle can be used to infer surface properties. We will review the use of optical tweezers for studying the viscosity of aerosol particles and discuss the potential use of this micro-rheological tool for probing the fundamental concepts of phase, thermodynamic equilibrium and metastability.

Allosteric regulation of phosphofructokinase controls the emergence of glycolytic oscillations in isolated yeast cells

Oscillations are widely distributed in nature and synchronization of oscillators has been described at the cellular level (e.g. heart cells) and at the population level (e.g. fireflies). Yeast glycolysis is the best known oscillatory system, although it has been studied almost exclusively at the population level (i.e. limited to observations of average behaviour in synchronized cultures). We studied individual yeast cells that were positioned with optical tweezers in a microfluidic chamber to determine the precise conditions for autonomous glycolytic oscillations. Hopf bifurcation points were determined experimentally in individual cells as a function of glucose and cyanide concentrations. The experiments were analyzed in a detailed mathematical model and could be interpreted in terms of an oscillatory manifold in a three-dimensional state-space; crossing the boundaries of the manifold coincides with the onset of oscillations and positioning along the longitudinal axis of the volume sets the period. The oscillatory manifold could be approximated by allosteric control values of phosphofructokinase for ATP and AMP.

DATABASE

The mathematical models described here have been submitted to the JWS Online Cellular Systems Modelling Database and can be accessed at http://jjj.mib.ac.uk/webMathematica/UItester.jsp?modelName=gustavsson5. [Database section added 14 May 2014 after original online publication].

Single molecule techniques in DNA repair: a primer

A powerful new approach has become much more widespread and offers insights into aspects of DNA repair unattainable with billions of molecules. Single molecule techniques can be used to image, manipulate or characterize the action of a single repair protein on a single strand of DNA. This allows search mechanisms to be probed, and the effects of force to be understood. These physical aspects can dominate a biochemical reaction, where at the ensemble level their nuances are obscured. In this paper we discuss some of the many technical advances that permit study at the single molecule level. We focus on DNA repair to which these techniques are actively being applied. DNA repair is also a process that encompasses so much of what single molecule studies benefit--searching for targets, complex formation, sequential biochemical reactions and substrate hand-off to name just a few. We discuss how single molecule biophysics is poised to transform our understanding of biological systems, in particular DNA repair.

Determining the unique refractive index properties of solid polystyrene aerosol using broadband Mie scattering from optically trapped beads

A method is described to measure the refractive index dispersion with wavelength of optically trapped solid particles in air. Knowledge of the refraction properties of solid particles is critical for the study of aerosol; both in the laboratory and in the atmosphere for climate studies. Single micron-sized polystyrene beads were optically trapped in air using a vertically aligned counter-propagating configuration of focussed laser beams. Each bead was illuminated using white light from a broadband light emitting diode (LED) and elastic scattering within the bead was collected onto a spectrograph. The resulting Mie spectra were analysed to accurately determine polystyrene bead radii to ±0.4 nm and values of the refractive index to ±0.0005 over a wavelength range of 480-700 nm. We demonstrate that optical trapping combined with elastic scattering can be used to both accurately size polystyrene beads suspended in air and determine their wavelength dependent refractive index. The refractive index dispersions are in close agreement with reported values for polystyrene beads in aqueous dispersion. Our results also demonstrate a variation in the refractive index of polystyrene, from bead to bead, in a commercial sample. The measured variation highlights that care must be taken when using polystyrene beads as a calibration aerosol.

Optical trapping and manipulation of nanostructures

Optical trapping and manipulation of micrometre-sized particles was first reported in 1970. Since then, it has been successfully implemented in two size ranges: the subnanometre scale, where light-matter mechanical coupling enables cooling of atoms, ions and molecules, and the micrometre scale, where the momentum transfer resulting from light scattering allows manipulation of microscopic objects such as cells. But it has been difficult to apply these techniques to the intermediate - nanoscale - range that includes structures such as quantum dots, nanowires, nanotubes, graphene and two-dimensional crystals, all of crucial importance for nanomaterials-based applications. Recently, however, several new approaches have been developed and demonstrated for trapping plasmonic nanoparticles, semiconductor nanowires and carbon nanostructures. Here we review the state-of-the-art in optical trapping at the nanoscale, with an emphasis on some of the most promising advances, such as controlled manipulation and assembly of individual and multiple nanostructures, force measurement with femtonewton resolution, and biosensors.

Dynamic microbead arrays for biosensing applications

In this paper we present the development of an optical tweezers platform capable of creating on-demand dynamic microbead arrays for the multiplexed detection of biomolecules. We demonstrate the use of time-shared optical tweezers to dynamically assemble arrays of sensing microspheres, while simultaneously recording fluorescence signals in real time. The detection system is able to achieve multiplexing by using quantum dot nanocrystals as both signaling probes and encoding labels on the surface of the trapped microbeads. The encoding can be further extended by using a range of bead sizes. Finally, the platform is used to detect and identify three genes expressed by pathogenic strains of Escherichia coli O157:H7. The in situ actuation enabled by the optical tweezers, combined with multiplexed fluorescence detection offers a new tool, readily adaptable to biosensing applications in microfluidic devices, and could potentially enable the development of on-demand diagnostics platforms.

Differential interference contrast microscopy using light-emitting diode illumination in conjunction with dual optical traps

Differential interference contrast (DIC) microscopy is a common mode of biological light microscopy used to achieve maximal resolution and contrast with label-free, weakly absorbing specimens such as cells. Maintaining the polarization state of the illuminating light is essential for the technique, and this requirement can conflict with optical trapping. We describe how to optimize DIC imaging using a light-emitting diode illumination source in a microscope while integrating a dual optical trap into the set up. Every time a polarized light beam reflects off or transmits through a dichroic mirror in the beam path, its polarization state will change if it is not polarized exactly parallel (p) or perpendicular (s) to the plane of incidence. We observe wavelength-dependent optical rotation and depolarization effects in our illumination light upon reflection from/transmission through dichroic mirrors in the beam path, resulting in significant degradation of image quality. We describe a method to compensate for these effects by introducing quarter-waveplates and a laser clean-up filter into the imaging pathway. We show that this approach achieves a full recovery of image quality.

The properties of gold nanospheres studied with dark field optical trapping

We demonstrate trapping and characterization of multiple gold nanospheres with a setup composed of dark field imaging and optical tweezers. The number of trapped nanospheres is quantified by the overall dark-field scattering intensity. The spectra of the scattering intensity show that there is no interparticle coupling among trapped nanospheres when the density of nanospheres in the trap is low enough (less than 10 particles), while the density of nanosphere increases the interparticle coupling of nanospheres becomes obvious. In addition, the trapping potential of a single gold nanosphere is obtained by trapping an ensemble of gold nanospheres.

Design, fabrication, and evaluation of a multilevel spiral-phase Fresnel zone plate for optical trapping

A compact optics configuration for the generation of donut beams for trapping atoms at the micrometer scale using a multilevel spiral-phase Fresnel zone plate (FZP) and a semiconductor laser is proposed. A FZP is designed and a multilevel spiral phase is integrated into it. A spiral-phase FZP with a radius of 1 mm and with more than 1300 half-period zones is designed with multiple angular levels for integer and fractional topological charges, and the device is fabricated using electron-beam lithography direct writing. The performance of the device is evaluated, and the generation of symmetric and asymmetric donut beams is successfully demonstrated.

Auto- and cross-power spectral analysis of dual trap optical tweezer experiments using Bayesian inference

The thermal fluctuations of micron-sized beads in dual trap optical tweezer experiments contain complete dynamic information about the viscoelastic properties of the embedding medium and-if present-macromolecular constructs connecting the two beads. To quantitatively interpret the spectral properties of the measured signals, a detailed understanding of the instrumental characteristics is required. To this end, we present a theoretical description of the signal processing in a typical dual trap optical tweezer experiment accounting for polarization crosstalk and instrumental noise and discuss the effect of finite statistics. To infer the unknown parameters from experimental data, a maximum likelihood method based on the statistical properties of the stochastic signals is derived. In a first step, the method can be used for calibration purposes: We propose a scheme involving three consecutive measurements (both traps empty, first one occupied and second empty, and vice versa), by which all instrumental and physical parameters of the setup are determined. We test our approach for a simple model system, namely a pair of unconnected, but hydrodynamically interacting spheres. The comparison to theoretical predictions based on instantaneous as well as retarded hydrodynamics emphasizes the importance of hydrodynamic retardation effects due to vorticity diffusion in the fluid. For more complex experimental scenarios, where macromolecular constructs are tethered between the two beads, the same maximum likelihood method in conjunction with dynamic deconvolution theory will in a second step allow one to determine the viscoelastic properties of the tethered element connecting the two beads.

Photoactivation of neurons by laser-generated local heating

We present a method for achieving temporally and spatially precise photoactivation of neurons without the need for genetic expression of photosensitive proteins. Our method depends upon conduction of thermal energy via absorption by chemically inert carbon particles and does not require the presence of voltage-gated channels to create transmembrane currents. We demonstrate photothermal initiation of action potentials in Hirudo verbana neurons within an intact ganglion and of transmembrane currents in Xenopus oocytes. Thermal energy is delivered by focused 50 ms, 650 nm laser pulses with total pulse energies between 250 and 3500 μJ. We document an optical delivery system for targeting specific neurons that can be expanded for multiple target sites. Our method achieves photoactivation reliably (70 - 90% of attempts) and can issue multiple pulses (6-9) with minimal changes to cellular properties as measured by intracellular recording. Direct photoactivation presents a significant step towards all-optical analysis of neural circuits in animals such as Hirudo verbana where genetic expression of photosensitive compounds is not feasible.

A hyphenated optical trap capillary electrophoresis laser induced native fluorescence system for single-cell chemical analysis

Single-cell measurements allow a unique glimpse into cell-to-cell heterogeneity; even small changes in selected cells can have a profound impact on an organism's physiology. Here an integrated approach to single-cell chemical sampling and assay are described. Capillary electrophoresis (CE) with laser-induced native fluorescence (LINF) has the sensitivity to characterize natively fluorescent indoles and catechols within individual cells. While the separation and detection approaches are well established, the sampling and injection of individually selected cells requires new approaches. We describe an optimized system that interfaces a single-beam optical trap with CE and multichannel LINF detection. A cell is localized within the trap and then the capillary inlet is positioned near the cell using a computer-controlled micromanipulator. Hydrodynamic injection allows cell lysis to occur within the capillary inlet, followed by the CE separation and LINF detection. The use of multiple emission wavelengths allows improved analyte identification based on differences in analyte fluorescence emission profiles and migration time. The system enables injections of individual rat pinealocytes and quantification of their endogenous indoles, including serotonin, N-acetyl-serotonin, 5-hydroxyindole-3-acetic acid, tryptophol and others. The amounts detected in individual cells incubated in 5-hydroxytryptophan ranged from 10(-14) mol to 10(-16) mol, an order of magnitude higher than observed in untreated pinealocytes.

Dynamical hologram generation for high speed optical trapping of smart droplet microtools

This paper demonstrates spatially selective sampling of the plasma membrane by the implementation of time-multiplexed holographic optical tweezers for Smart Droplet Microtools (SDMs). High speed (>1000fps) dynamical hologram generation was computed on the graphics processing unit of a standard display card and controlled by a user friendly LabView interface. Time multiplexed binary holograms were displayed in real time and mirrored to a ferroelectric Spatial Light Modulator. SDMs were manufactured with both liquid cores (as previously described) and solid cores, which confer significant advantages in terms of stability, polydispersity and ease of use. These were coated with a number of detergents, the most successful based upon lipids doped with transfection reagents. In order to validate these, trapped SDMs were maneuvered up to the plasma membrane of giant vesicles containing Nile Red and human biliary epithelial (BE) colon cancer cells with green fluorescent labeled protein (GFP)-labeled CAAX (a motif belonging to the Ras protein). Bright field and fluorescence images showed that successful trapping and manipulation of multiple SDMs in x, y, z was achieved with success rates of 30-50% and that subsequent membrane-SDM interactions led to the uptake of Nile Red or GFP-CAAX into the SDM.

Sustained glycolytic oscillations in individual isolated yeast cells

Yeast glycolytic oscillations have been studied since the 1950s in cell-free extracts and intact cells. For intact cells, sustained oscillations have so far only been observed at the population level, i.e. for synchronized cultures at high biomass concentrations. Using optical tweezers to position yeast cells in a microfluidic chamber, we were able to observe sustained oscillations in individual isolated cells. Using a detailed kinetic model for the cellular reactions, we simulated the heterogeneity in the response of the individual cells, assuming small differences in a single internal parameter. This is the first time that sustained limit-cycle oscillations have been demonstrated in isolated yeast cells.

DATABASE

The mathematical model described here has been submitted to the JWS Online Cellular Systems Modelling Database and can be accessed at http://jjj.biochem.sun.ac.za/database/gustavsson/index.html free of charge.

Significantly improved trapping lifetime of nanoparticles in an optical trap using feedback control

We demonstrate an increase in trapping lifetime for optically trapped nanoparticles by more than an order of magnitude using feedback control, with no corresponding increase in beam power. Langevin dynamics simulations were used to design the control law, and this technique was then demonstrated experimentally using 100 nm gold particles and 350 nm silica particles. No particle escapes were detected with the controller on, leading to lower limits on the increase in lifetime for 100 nm gold particles of 26 times (at constant average beam power) and 22 times for 350 nm silica particles (with average beam power reduced by one-third). The approach described here can be combined with other techniques, such as counter propagating beams or higher-order optical modes, to trap the smallest nanoparticles and can be used to reduce optical heating of particles that are susceptible to photodamage, such as biological systems.

Phase-transition-like properties of double-beam optical tweezers

We report on double-beam optical tweezers that undergo previously unknown phase-transition-like behavior resulting in the formation of more optical traps than the number of beams used to create them. We classify the optical force fields which produce multiple traps for a double-beam system including the critical behavior. This effect is demonstrated experimentally in orthogonally polarized (noninterfering) dual-beam optical tweezers for a silica particle of 2.32  μm diameter. Phase transitions of multiple beam trapping systems have implications for hopping rates between traps and detection of forces between biomolecules using dual-beam optical tweezers. It is an example of a novel dynamic system with multiple states where force fields undergo a series of sign inversions as a function of parameters such as size and beam separation.

Holographic UV laser microsurgery

We use a spatial light modulator (SLM) to diffract a single UV laser pulse to ablate multiple points on a Drosophila embryo. This system dynamically generates a phase hologram for ablating a user-defined pattern fast enough to be used with living, and thus moving, tissue. We demonstrate the ability of this single-pulse multi-point system to perform two experiments that are very difficult for conventional microsurgery-isolating single cells in vivo and measuring fast retractions from large incisions.

Individual particle handling in a microfluidic system based on parallel laser trapping

We present an optical trapping system combining individually addressable multiple laser traps with fluorescence spectroscopy. An in-line set of 64 near-IR laser diodes is used to create a line of individually addressable traps inside a microfluidic chip. This system is completed by an excitation/detection line for spectrally resolved fluorescence imaging of trapped particles. Highly parallel trapping in a constant flow (up to a few millimeters per second), fast particle handling rates (up to a few particles per second), and the possibility of recording fluorescence spectra of trapped objects lead to a performing bioanalytical platform, e.g., for highly parallel analysis and sorting.

Effect of the size and shape of a red blood cell on elastic light scattering properties at the single-cell level

We demonstrate the use of a double-beam optical tweezers system to stabilize red blood cell (RBC) orientation in the optical tweezers during measurements of elastic light scattering from the trapped cells in an angle range of 5-30 degrees. Another laser (He-Ne) was used to illuminate the cell and elastic light scattering distribution from the single cell was measured with a goniometer and a photomultiplier tube. Moreover, CCD camera images of RBCs with and without laser illumination are presented as complementary information. Light scattering from a RBC was measured in different fixed orientations. Light scattering from cells was also measured when the length of the cell was changed in two different orientations. Light scattering measurements from spherical and crenate RBCs are described and the results are compared with other cell orientations. Analysis shows that the measured elastic light scattering distributions reveal changes in the RBC's orientation and shape. The effect of stretching on the changes in scattering is larger in the case of face-on incidence of He-Ne laser light than in rim-on incidence. The scattering patterns from RBCs in different orientations as well as from a spherical RBC were compared with numerical results found in literature. Good correlation was found.

Small-world rheology: an introduction to probe-based active microrheology

We introduce active, probe-based microrheological techniques for measuring the flow and deformation of complex fluids. These techniques are ideal for mechanical characterization either when little sample is available, or when samples show significant spatial heterogeneity. We review recent results, paying particular attention to comparing and contrasting rheological parameters obtained from micro- and macro-rheological techniques.

Rotation of single bacterial cells relative to the optical axis using optical tweezers

Using a single-beam, oscillating optical tweezers, we demonstrate trapping and rotation of rod-shaped bacterial cells with respect to the optical axis. The angle of rotation, θ, is determined by the amplitude of the oscillation. It is shown that θ can be measured from the longitudinal cell intensity profiles in the corresponding phase-contrast images. The technique allows viewing the cell from different perspectives and can provide a useful tool in fluorescence microscopy for the analysis of three-dimensional subcellular structures.

Parallel analysis of individual biological cells using multifocal laser tweezers Raman spectroscopy

We report on the development and characterization of a multifocal laser tweezers Raman spectroscopy (M-LTRS) technique for parallel Raman spectral acquisition of individual biological cells. Using a 785-nm diode laser and a time-sharing laser trapping scheme, multiple laser foci are generated to optically trap single polystyrene beads and suspension cells in a linear pattern. Raman signals from the trapped objects are simultaneously projected through the slit of a spectrometer and spatially resolved on a charge-coupled device (CCD) detector with minimal signal crosstalk between neighboring cells. By improving the rate of single-cell analysis, M-LTRS is expected to be a valuable method for studying single-cell dynamics of cell populations and for the development of high-throughput Raman based cytometers.

Dynamic and reversible organization of zeolite L crystals induced by holographic optical tweezers

Organization and patterning of zeolite L crystals with their unique properties such as their one-dimensional nano channel system is of highest topical interest with various applications in many areas of science. We demonstrate full three-dimensional optical control of single zeolite L crystals and for the first time fully reversible, dynamic organization of a multitude of individually controlled zeolite L crystals.

Full 3D translational and rotational optical control of multiple rod-shaped bacteria

The class of rod-shaped bacteria is an important example of non-spherical objects where defined alignment is desired for the observation of intracellular processes or studies of the flagella. However, all available methods for orientational control of rod-shaped bacteria are either limited with respect to the accessible rotational axes or feasible angles or restricted to one single bacterium. In this paper we demonstrate a scheme to orientate rod-shaped bacteria with holographic optical tweezers (HOT) in any direction. While these bacteria have a strong preference to align along the direction of the incident laser beam, our scheme provides for the first time full rotational control of multiple bacteria with respect to any arbitrary axis. In combination with the translational control HOT inherently provide, this enables full control of all three translational and the two important rotational degrees of freedom of multiple rod-shaped bacteria and allows one to arrange them in any desired configuration.