Optical tuning of dielectric nanoantennas for thermo-optically reconfigurable nonlinear metasurfaces

Efficient Thermo-Optic Switching and Modulating in Nonlocal Metasurfaces

High-Q optical resonances in nonlocal metasurfaces, benefiting from significantly enhanced light/matter interactions, feature strong responses even under a weak external stimulus. In this work, we leverage the high-Q resonances of quasi-guided modes (QGMs) supported by a photonic crystal slab (PCS) structure to achieve efficient optical switching/modulation. The QGMs with an experimentally measured Q-factor of ∼2200 are realized by shifting every second column of air holes in a rectangular lattice within a silicon slab. At a weak illumination intensity of less than 4.0 W/cm2 from a 532 nm continuous-wave pump laser, the QGM resonance around 1550 nm experiences a pronounced spectral shift, with modulation depth exceeding 55%. This is attributed to the thermo-optic response caused by photothermal heating of the metasurface triggered by the absorption of the pump laser in silicon, which is further verified by the electrical heating approach. Our reported results showcase a simple yet effective way of tailoring light propagation in nonlocal metasurfaces.

Chirality-controlled second-order nonlinear frequency conversion in lithium niobate film metasurfaces

The high-quality factor resonant metasurfaces have extensive applications in enhancing nonlinear frequency conversion efficiency at the subwavelength scale. However, methods for actively modulating the frequency conversion process are limited. We design a chiral lithium niobate film metasurface and investigate the photonic spin as a new degree of freedom to dynamically control the second-order nonlinear frequency conversion, without reconfiguring the structure by using external stimuli. The chiral resonance with circular dichroism (CD) of 0.62 gives rise to a high nonlinear CD of 0.84 in second-harmonic generation efficiency. Interestingly, combining the chiral resonance and an achiral quasi-bound state in the continuum enables us to investigate the photonic-spin-controlled sum-frequency generation and the photon pair generation from the spontaneous parametric downconversion process. Owing to the ultrahigh quality factor exceeding 103 both for two resonances, the second-order nonlinear frequency conversion occurs at a wavelength region of 0.2 nm, suggesting good monochromaticity. Our work opens new, to our knowledge, avenues for practical implementation of dynamically controlled nonlinear optical devices and will find utility in holography, switchable light sources, and information processing.

Giant ultrafast dichroism and birefringence with active nonlocal metasurfaces

Switching of light polarization on the sub-picosecond timescale is a crucial functionality for applications in a variety of contexts, including telecommunications, biology and chemistry. The ability to control polarization at ultrafast speed would pave the way for the development of unprecedented free-space optical links and of novel techniques for probing dynamical processes in complex systems, as chiral molecules. Such high switching speeds can only be reached with an all-optical paradigm, i.e., engineering active platforms capable of controlling light polarization via ultrashort laser pulses. Here we demonstrate giant modulation of dichroism and birefringence in an all-dielectric metasurface, achieved at low fluences of the optical control beam. This performance, which leverages the many degrees of freedom offered by all-dielectric active metasurfaces, is obtained by combining a high-quality factor nonlocal resonance with the giant third-order optical nonlinearity dictated by photogenerated hot carriers at the semiconductor band edge.

Two-Color Spatially Resolved Tuning of Polymer-Coated Metasurfaces

For the realization of truly reconfigurable metasurface technologies, dynamic spatial tuning of the metasurface resonance is required. Here we report the use of organic photoswitches as a means for the light-induced spatial tuning of metasurface resonances. Coating of a dielectric metasurface, hosting high-quality-factor resonances, with a spiropyran (SPA)-containing polymer enabled dynamic resonance tuning up to 4 times the resonance full-width at half-maximum with arbitrary spatial precision. A major benefit of employing photoswitches is the broad toolbox of chromophores available and the unique optical properties of each. In particular, SPA and azobenzene (AZO) photoswitches can both be switched with UV light but exhibit opposite refractive index changes. When applied to the metasurface, SPA induced a red shift in the metasurface resonance with a figure of merit of 97 RIU-1, while AZO caused a blue shift in the resonance with an even greater sensitivity of 100 RIU-1. Critically, SPA and AZO can be individually recovered with red and blue light, respectively. To exploit this advantage, we coated a dielectric metasurface with spatially offset SPA- and AZO-containing polymers to demonstrate wavelength-dependent, spatially resolved control over the metasurface resonance tuning.

Advances in nonlinear metasurfaces for imaging, quantum, and sensing applications

Metasurfaces, composed of artificial meta-atoms of subwavelength size, can support strong light-matter interaction based on multipolar resonances and plasmonics, hence offering the great capability of empowering nonlinear generation. Recently, owing to their ability to manipulate the amplitude and phase of the nonlinear emission in the subwavelength scale, metasurfaces have been recognized as ultra-compact, flat optical components for a vast range of applications, including nonlinear imaging, quantum light sources, and ultrasensitive sensing. This review focuses on the recent progress on nonlinear metasurfaces for those applications. The principles and advances of metasurfaces-based techniques for image generation, including image encoding, holography, and metalens, are investigated and presented. Additionally, the overview and development of spontaneous photon pair generation from metasurfaces are demonstrated and discussed, focusing on the aspects of photon pair generation rate and entanglement of photon pairs. The recent blossoming of the nonlinear metasurfaces field has triggered growing interest to explore its ability to efficiently up-convert infrared images of arbitrary objects to visible images and achieve spontaneous parametric down-conversion. This recently emerged direction holds promising potential for the next-generation technology in night-vision, quantum computing, and biosensing fields.

Near to short wave infrared light generation through AlGaAs-on-insulator nanoantennas

AlGaAs-on-insulator (AlGaAs-OI) has recently emerged as a promising platform for nonlinear optics at the nanoscale. Among the most remarkable outcomes, second-harmonic generation (SHG) in the visible/near infrared spectral region has been demonstrated in AlGaAs-OI nanoantennas (NAs). In order to extend the nonlinear frequency generation towards the short wave infrared window, in this work we propose and demonstrate via numerical simulations difference frequency generation (DFG) in AlGaAs-OI NAs. The NA geometry is finely adjusted in order to obtain simultaneous optical resonances at the pump, signal and idler wavelengths, which results in an efficient DFG with conversion efficiencies up to 0.01%. Our investigation includes the study of the robustness against random variations of the NA geometry that may occur at fabrication stage. Overall, these outcomes identify what we believe to be a new potential and yet unexplored application of AlGaAs-OI NAs as compact devices for the generation and control of the radiation pattern in the near to short infrared spectral region.

Temperature invariant metasurfaces

Thermal effects are well known to influence the electronic and optical properties of materials through several physical mechanisms and are the basis for various optoelectronic devices. The thermo-optic (TO) effect, the refractive index variation with temperature (dn/dT), is one of the most common mechanisms used for tunable optical devices, including integrated optical components, metasurfaces, and nano-antennas. However, when a static and fixed operation is required, i.e., temperature invariant performance - this effect becomes a drawback and may lead to undesirable behavior through drifting of the resonance frequency, amplitude, or phase, as the operating temperature varies over time. In this work, we present a systematic approach to mitigate thermally induced optical fluctuations in nanophotonic devices. By using hybrid subwavelength resonators composed from two materials with opposite TO dispersions (dn/dT < 0 and dn/dT > 0), we are able to compensate for TO shifts and engineer nanophotonic components with zero effective TO coefficient (dn eff/dT ≈ 0). We demonstrate temperature invariant resonant frequency, amplitude, and phase response in meta-atoms and metasurfaces operating across a wide temperature range and broad spectral band. Our results highlight a path towards temperature invariant nanophotonics, which can provide constant and stable optical response across a wide range of temperatures and be applied to a plethora of optoelectronic devices. Controlling the sign and magnitude of TO dispersion extends the capabilities of light manipulation and adds another layer to the toolbox of optical engineering in nanophotonic systems.

All-optical scattering control in an all-dielectric quasi-perfect absorbing Huygens' metasurface

In this paper, we theoretically and experimentally demonstrated photothermal nonlinearities of both forward and backward scattering intensities from quasi-perfect absorbing silicon-based metasurface with only λ/7 thickness. The metasurface is efficiently heated up by photothermal effect under laser irradiation, which in turn modulates the scattering spectra via thermo-optical effect. Under a few milliwatt continuous-wave excitation at the resonance wavelength of the metasurface, backward scattering cross-section doubles, and forward scattering cross-section reduces to half. Our study opens up the all-optical dynamical control of the scattering directionality, which would be applicable to silicon photonic devices.

Menezes L, Tittl A, Ren H, Maier SA. Optical Metasurfaces for Energy Conversion

Nanostructured surfaces with designed optical functionalities, such as metasurfaces, allow efficient harvesting of light at the nanoscale, enhancing light-matter interactions for a wide variety of material combinations. Exploiting light-driven matter excitations in these artificial materials opens up a new dimension in the conversion and management of energy at the nanoscale. In this review, we outline the impact, opportunities, applications, and challenges of optical metasurfaces in converting the energy of incoming photons into frequency-shifted photons, phonons, and energetic charge carriers. A myriad of opportunities await for the utilization of the converted energy. Here we cover the most pertinent aspects from a fundamental nanoscopic viewpoint all the way to applications.

Nonlinear optical heating of all-dielectric super-cavity: efficient light-to-heat conversion through giant thermorefractive bistability

Optical heating of resonant nanostructures is one of the key issues in modern nanophotonics, being either harmful or desirable effect depending on the applications. Despite a linear regime of light-to-heat conversion being well-studied both for metal and semiconductor resonant systems is generalized as a critical coupling condition, the clear strategy to optimize optical heating upon high-intensity light irradiation is still missing. This work proposes a simple analytical model for such a problem, taking into account material properties changes caused by the heating. It allows us to derive a new general critical coupling condition for the nonlinear case, requiring a counterintuitive initial spectral mismatch between the pumping light frequency and the resonant one. Based on the suggested strategy, we develop an optimized design for efficient nonlinear optical heating, which employs a cylindrical nanoparticle supporting the quasi bound state in the continuum mode (quasi-BIC or so-called 'super-cavity mode') excited by the incident azimuthal vector beam. Our approach provides a background for various nonlinear experiments related to optical heating and bistability, where self-action of the intense laser beam can change resonant properties of the irradiated nanostructure.

Nonlinear response of Q-boosting metasurfaces beyond the time-bandwidth limit

Resonant nanostructures, such as photonic metasurfaces, have created an unprecedented case for enhanced light-matter interactions through local field engineering. However, the presence of resonances fundamentally limits the bandwidth of such interactions. Here, we report on amending the nonlinear optical response of a semiconducting metasurface through Q-boosting, where the Q-factor of a metasurface rapidly increases with time. The coupled-mode theory reveals overcoming the bandwidth limit by coupling a broadband signal to a bandwidth-matched resonance and Q-boosting at a timescale faster than a resonator lifetime. A control-excitation experiment simulation using a tailored Q-boosting silicon-germanium metasurface predicts the third-harmonic enhancement by factors of 8 (peak) and 4.5 (integrated) against the best-case static metasurface. An analysis of free-carrier losses based on experimental data shows robustness to nonradiative losses and offers a viable pathway to increasing the light-matter interactions beyond the bandwidth limit, with implications in nonlinear and quantum optics, sensing, and telecommunication technologies.

Third- and Second-Harmonic Generation in All-Dielectric Nanostructures: A Mini Review

Frequency conversion such as harmonic generation is a fundamental physical process in nonlinear optics. The conventional nonlinear optical systems suffer from bulky size and cumbersome phase-matching conditions due to the inherently weak nonlinear response of natural materials. Aiming at the manipulation of nonlinear frequency conversion at the nanoscale with favorable conversion efficiencies, recent research has shifted toward the integration of nonlinear functionality into nanophotonics. Compared with plasmonic nanostructures showing high dissipative losses and thermal heating, all-dielectric nanostructures have demonstrated many excellent properties, including low loss, high damage threshold, and controllable resonant electric and magnetic optical nonlinearity. In this review, we cover the recent advances in nonlinear nanophotonics, with special emphasis on third- and second-harmonic generation from all-dielectric nanoantennas and metasurfaces. We discuss the main theoretical concepts, the design principles, and the functionalities of third- and second-harmonic generation processes from dielectric nanostructures and provide an outlook on the future directions and developments of this research field.

Thermo-optical reshaping of second-harmonic emission from dimer all-dielectric nanoresonators

All-dielectric nanophotonics offers a wide range of possibilities for thermally induced light manipulation at the nanoscale. High quality resonances allow for efficient light-to-heat conversion supported by various temperature detection approaches based on thermally sensitive intrinsic optical responses. In this work, we study theoretically a phenomenon of the photothermal reshaping of the radiation pattern of second-harmonic generation (SHG) that occurs in resonant all-dielectric systems. In the suggested geometry, a near-IR pulsed laser is used for SHG while a continuous wave visible laser simultaneously heats the structure. The thermo-optical switching of the resonant optical states in the nanostructures governs the reconfiguration of the emission pattern, without significant loss in the magnitude of the SHG. We believe, that our findings will pave the way for subwavelength-size near-IR thermally switchable nonlinear optical devices.

Opto-thermally controlled beam steering in nonlinear all-dielectric metastructures

Reconfigurable metasurfaces have recently gained a lot of attention in applications such as adaptive meta-lenses, hyperspectral imaging and optical modulation. This kind of metastructure can be obtained by an external control signal, enabling us to dynamically manipulate the electromagnetic radiation. Here, we theoretically propose an AlGaAs device to control the second harmonic generation (SHG) emission at nanoscale upon optimized optical heating. The asymmetric shape of the used meta-atom is selected to guarantee a predominant second harmonic (SH) emission towards the normal direction. The proposed structure is concurrently excited by a pump beam at a fundamental wavelength of 1540 nm and by a continuous wave (CW) control signal above the semiconductor band gap. The optical tuning is achieved by a selective optimization of meta-atoms SH phase, which is modulated by the control signal intensity. We numerically demonstrate that the heating induced in the meta-atoms by the CW pump can be used to dynamically tune the device properties. In particular, we theoretically demonstrate a SH beam steering of 8° with respect to the vertical axis for an optimized device with average temperature increase even below 90° C.

Revisiting impulsive stimulated thermal scattering in supercooled liquids: Relaxation of specific heat and thermal expansion

Impulsive stimulated thermal scattering (ISTS) allows one to access the structural relaxation dynamics in supercooled molecular liquids on a time scale ranging from nanoseconds to milliseconds. Till now, a heuristic semi-empirical model has been commonly adopted to account for the ISTS signals. This model implicitly assumes that the relaxation of specific heat, C, and thermal expansion coefficient, γ, occur on the same time scale and accounts for them via a single stretched exponential. This work proposes two models that assume disentangled relaxations, respectively, based on the Debye and Havriliak-Negami assumptions for the relaxation spectrum and explicitly accounting for the relaxation of C and γ separately in the ISTS response. A theoretical analysis was conducted to test and compare the disentangled relaxation models against the stretched exponential. The former models were applied to rationalize the experimental ISTS signals acquired on supercooled glycerol. This allows us to simultaneously retrieve the frequency-dependent specific heat and thermal expansion up to the sub-100 MHz frequency range and further to compare the fragility and time scale probed by thermal, mechanical, and dielectric susceptibilities.

Statistically Representative Metrology of Nanoparticles via Unsupervised Machine Learning of TEM Images

The morphology of nanoparticles governs their properties for a range of important applications. Thus, the ability to statistically correlate this key particle performance parameter is paramount in achieving accurate control of nanoparticle properties. Among several effective techniques for morphological characterization of nanoparticles, transmission electron microscopy (TEM) can provide a direct, accurate characterization of the details of nanoparticle structures and morphology at atomic resolution. However, manually analyzing a large number of TEM images is laborious. In this work, we demonstrate an efficient, robust and highly automated unsupervised machine learning method for the metrology of nanoparticle systems based on TEM images. Our method not only can achieve statistically significant analysis, but it is also robust against variable image quality, imaging modalities, and particle dispersions. The ability to efficiently gain statistically significant particle metrology is critical in advancing precise particle synthesis and accurate property control.

Time-resolved thermal lens investigation of glassy dynamics in supercooled liquids: Theory and experiments

This work reports results on the simultaneous spectroscopy of the specific heat and thermal expansivity of glycerol by making use of a wideband time-resolved thermal lens (TL) technique. An analytical model is presented which describes TL transients in a relaxing system subjected to impulsive laser heating. Experimentally, a set of TL waveforms, from 1 ns to 20 ms, has been recorded for a glycerol sample upon supercooling, from 300 to 200 K. The satisfactory fitting of the TL signals to the model allows the assessment of relaxation strength and relaxation frequency of the two quantities up to sub-100 MHz, extending the specific heat and thermal expansion spectroscopy by nearly three and eight decades, respectively. Fragility values, extracted from the relaxation behavior of the specific heat and the thermal expansion coefficient, are found to be similar, despite a substantial difference in relaxation strength.

Tungsten Based Spectrally Selective Absorbers with Anisotropic Rough Surface Texture

Spectrally selective absorbers have received considerable interest due to their applications in thermophotovoltaic devices and as solar absorbers. Due to extreme operating conditions in these applications, such as high temperatures, thermo-mechanically stable and broadband spectrally selective absorbers are of interest. This paper demonstrates anisotropic random rough surfaces that provide broadband spectrally selective absorption for the thermo-mechanically stable Tungsten surfaces. Anisotropic random rough surface has different correlation lengths in the x- and y-directions, which means their topography parameters have directional dependence. In particular, we demonstrate that spectral absorptance of Tungsten random rough surfaces at visible (VIS) and near-infrared (NIR) spectral regions are sensitive to correlation length and RMS height variations. Our results indicate that by optimizing random rough surface parameters, absorption values exceeding 95% can be obtained. Moreover, our results indicate that anisotropic random rough surfaces broaden the bandwidth of the high absorption region. It is shown that in VIS and NIR regions, the absorption enhancements of up to 47% and 52% are achieved for the isotropic and anisotropic rough surfaces, respectively.