The cervical spine of the American barn owl (Tyto furcata pratincola): I. Anatomy of the vertebrae and regionalization in their S-shaped arrangement

Cervical anatomy and its relation to foraging habits in aquatic birds (Aves: Neornithes: Neoaves)

Birds have extremely flexible necks, which help in their search for food. However, studies on the variation in bird cervical anatomy and its relationship with foraging are rare, despite the different habits presented between species. Here, we analyze the anatomy of the neck of aquatic birds and relate it to their foraging strategies. We dissected specimens representing four species of Charadriiformes, 11 species of Phaethoquornithes, and two specimens belonging to the outgroup Telluraves. We chose to emphasize Charadriiformes and Phaethoquornithes because they present several strategies that require cervical mobility and stability. We note that vertebral anatomy and dimensions vary, which affects the shape and size of the soft tissues attached throughout the neck. The synovial cartilage present in the articulatio intercorporalis represents an additional length in the neck, however, this is not longer than that observed in animals with intervertebral discs. Our analysis indicates that birds have a prevalence of dorsoventral movements in the middle of the neck and lateral and rotational movements near the base of the neck, while the region near the head presents a wide range of movement in all directions. Cervical ligaments and muscles throughout the neck provide stability in all segments, although the robustness of the soft tissues indicates that the most caudal portion of the neck is the most stable. The vertebral and soft tissue anatomy is consistent with the extensive mobility in pitching, yaw, and roll movements performed mainly by the head and first segment of the neck during the different foraging of the analyzed birds. Furthermore, the muscles closer to the skull are robust and allow the execution of a variety of habits to capture food in different species. The subsequent cervical segments present differences that explain their reduction in mobility, but they are equally stable.

Are owls technically capable of making a full head turn?

The three-dimensional configuration of the neck that produces extreme head turn in owls was studied using the Joint Coordinate System. The limits of planar axial rotation (AR), lateral, and sagittal bending in each vertebral joint were measured. They are not extraordinary among birds, except probably for the extended ability for AR. The vertebral joint angles involved in the 360° head turn do not generally exceed the limits of planar mobility. Rotation in one plane does not expand the range of motion in the other, with one probable exception being extended dorsal bending in the middle of the neck. Therefore, the extreme 360° head turn can be presented as a simple combination of the three planar motions in the neck joints. Surprisingly, certain joints are always laterally bent or axially rotated to the opposite side than the head was turned. This allows keeping the anterior part of the neck parallel to the thoracic spine, which probably helps preserve the ability for peering head motions throughout the full head turn. The potential ability of one-joint muscles of the owl neck, the mm. intertransversarii, to ensure the 360° head turn was addressed. It was shown that the 360° head turn does not require these muscles to shorten beyond the known contraction limit of striated vertebrate muscles. Shortening by 50% or less is enough for the mm. intertransversarii in the middle neck region for the 360° head turn. This study has broad implications for further research on vertebral mobility and function in a variety of tetrapods, providing a new method for CT scan-based measurement of intervertebral angles.

The functional significance of aberrant cervical counts in sloths: insights from automated exhaustive analysis of cervical range of motion

Besides manatees, the suspensory extant 'tree sloths' are the only mammals that deviate from a cervical count (CC) of seven vertebrae. They do so in opposite directions in the two living genera (increased versus decreased CC). Aberrant CCs seemingly reflect neck mobility in both genera, suggesting adaptive significance for their head position during suspensory locomotion and especially increased ability for neck torsion in three-toed sloths. We test two hypotheses in a comparative evolutionary framework by assessing three-dimensional intervertebral range of motion (ROM) based on exhaustive automated detection of bone collisions and joint disarticulation while accounting for interacting rotations of roll, yaw and pitch. First, we hypothesize that the increase of CC also increases overall neck mobility compared with mammals with a regular CC, and vice versa. Second, we hypothesize that the anatomy of the intervertebral articulations determines mobility of the neck. The assessment revealed that CC plays only a secondary role in defining ROM since summed torsion (roll) capacity was primarily determined by vertebral anatomy. Our results thus suggest limited neck rotational adaptive significance of the CC aberration in sloths. Further, the study demonstrates the suitability of our automated approach for the comparative assessment of osteological ROM in vertebral series.

Owl-Neck-Spine-Inspired, Additively Manufactured, Joint Assemblies with Shape Memory Alloy Wire Actuators

Nature provides a considerable number of good examples for simple and very efficient joint assemblies. One example is the enormously flexible cervical spine of American barn owls, which consists of 14 cervical vertebrae. Each pair of vertebrae produces a comparatively small individual movement in order to provide a large overall movement of the entire cervical spine. The biomimetic replication of such joints is difficult due to the delicate and geometric unrestricted joint shapes as well as the muscles that have to be mimicked. Using X-ray as well as micro-computed tomography images and with the utilisation of additive manufacturing, it was possible to produce the owl neck vertebrae in scaled-up form, to analyse them and then to transfer them into technically usable joint assemblies. The muscle substitution of these joints was realised by smart materials actuators in the form of shape memory alloy wire actuators. This actuator technology is outstanding for its muscle-like movement and for its high-energy density. The disadvantage of this wire actuator technology is the low rate of contraction, which means that a large length of wire has to be installed to generate adequate movement. For this reason, the actuator wires were integrated into additively manufactured carrier components to mimic biological joints. This resulted in joint designs that compensate for the disadvantages of the small contraction of the actuators by intelligently installing large wire lengths on comparatively small installation spaces, while also providing a sufficient force output. With the help of a test rig, the developed technical joint variants are examined and evaluated. This demonstrated the technical applicability of this biomimetic joints.

Morphological examination and scanning electron microscopy of the barn owl's (Tyto alba) tongue

The beak structure changes according to the feeding patterns of birds. Further, the morphological and histological structures of their tongues vary. Therefore, the current study aimed to perform macroanatomical and histological examinations and scanning electron microscopy of the barn owl's (Tylo alba) tongue. Two dead barn owls were brought to the anatomy laboratory and were used as study material. The tongue of the barn owl was long, triangular-shaped with a bifurcated tip. There were no papillae in the anterior 1/3 of the tongue, and the lingual papillae were shaped toward the back. The radix linguae were surrounded by a single row of conical papillae. Irregular thread-like papillae were found on both sides of the tongue. The salivary gland ducts were on the lateral margin of the corpus linguae and the dorsal surface of the radix linguae. The lingual glands were in the lamina propria near the stratified squamous epithelium layer of the tongue. The dorsal surface of the tongue comprised non-keratinized stratified squamous epithelium, and the ventral surface and caudal part of the tongue had keratinized stratified squamous epithelium. Hyaline cartilages were detected in the connective tissue immediately below the non-keratinized stratified squamous epithelium on the dorsal surface of the root of the tongue. The study results can contribute to the current knowledge on the anatomical structure of birds. Further, they can be useful in managing the barn owl when used as companion animals and in research activity.

Regionalization, constraints, and the ancestral ossification patterns in the vertebral column of amniotes

The development of the vertebral column has been studied extensively in modern amniotes, yet many aspects of its evolutionary history remain enigmatic. Here we expand the existing data on four major vertebral developmental patterns in amniotes based on exceptionally well-preserved specimens of the early Permian mesosaurid reptile Mesosaurus tenuidens: (i) centrum ossification, (ii) neural arch ossification, (iii) neural arch fusion, and (iv) neurocentral fusion. We retrace the evolutionary history of each pattern and reconstruct the ancestral condition in amniotes. Despite 300 million years of evolutionary history, vertebral development patterns show a surprisingly stability in amniotes since their common ancestor. We propose that this stability may be linked to conservatism in the constraints posed by underlying developmental processes across amniotes. We also point out that birds, mammals, and squamates each show specific trends deviating from the ancestral condition in amniotes, and that they remain rather unchanged within these lineages. The stability of their unique patterns demonstrates a certain homogeneity of vertebral developmental constraints within these lineages, which we suggest might be linked to their specific modes of regionalization. Our research provides a framework for the evolution of axial development in amniotes and a foundation for future studies.

In Vivo Analysis of the Dynamic Motion Stability Characteristics of Geese’s Neck

The goose’s neck is an excellent stabilizing organ with its graceful neck curves and flexible movements. However, the stabilizing mechanism of the goose’s neck remains unclear. This study adopts a dynamic in vivo experimental method to obtain continuous and accurate stable motion characteristics of the goose’s cervical vertebra. Firstly, the results showed that when the body of a goose was separately moved back and forth along the Y direction (front and back) and Z direction (up and down), the goose’s neck can significantly stabilize the head. Then, because of the limitation of the X-ray imaging area, the three-dimensional intervertebral rotational displacements for vertebrae C4–C8 were obtained, and the role that these five segments play in the stabilization of the bird’s neck was analyzed. This study reveals that the largest range of the adjacent vertebral rotational movement is around the X-axis, the second is around the Y-axis, and the smallest is around the Z-axis. This kinematic feature is accord with the kinematic feature of the saddle joint, which allows the flexion/around X-axis and lateral bending/around Y-axis, and prevents axial rotation/around Z-axis.

Modeling intervertebral articulation: The rotule à doigt mechanical joint (RAD) in birds and mammals

The vertebrate skeleton is composed of articulated bones. Most of the articulations are classically described using mechanical joints, except the intervertebral joint. The aim of this study was to identify a joint model with the same mechanical features as the cervical joints. On the neck vertebrae, six articular surfaces participate in the joint: the cranial part of the centrum and the facets of the two prezygapophyses of a vertebra articulate on the caudal part of the centrum and the two articular facets of the postzygapophyses of the previous vertebra. We used the intervertebral joints of the birds neck to identify the mechanical joint representing intervertebral linkage. This link was described in the literature as a joint allowing two or three rotations and no translation. These features correspond to the rotule à doigt (RAD) joint, a ball and socket joint with a pin. We compared the RAD joint to the postaxial intervertebral joints of the avian neck and found it a suitable model to determine the geometrical features involved in the joint mobility. The difference in the angles of virtual axes linking the geometrical center of the centrum to the zygapophysis surfaces determines the mean dorsoventral flexion of the joint. It also helps to limit longitudinal rotation. The orientation of the zygapophysis surfaces determines the range of motion in both dorsoventral and lateral flexion. The overall system prevents dislocation. The model was validated on 13 joints of a vulture neck and 11 joints of a swallow neck and on one joint (C6-C7) in each of three mammal species: the wolf (Canis lupus), mole (Talpa europaea), and human (Homo sapiens). The RAD mechanical joint was found in all vertebral articulations. This validation of the model on different species shows that the RAD intervertebral joint model makes it possible to extract the parameters that guide and limit the mobility of the cervical spine from the complex shape of the vertebrae and to compare them in interspecific studies.

A Review of Bioinspired Vibration Control Technology

Due to huge demand in engineering, vibration control technology and related studies have always been at the frontiers of research. Although traditional vibration control methods are stable and reliable, they have obvious shortcomings. Through evolution and natural selection, certain body-parts of animals in the natural world have been cleverly constructed and well designed. This provides a steady stream of inspiration for the design of vibration control equipment. The prime objective of this review is to highlight recent advances in the bionic design of vibration control devices. Current bionic vibration control devices were classified, and their bionic principles were briefly described. One kind was the bionic device based on the brain structure of the woodpecker, which is mostly used to reduce vibration at high frequencies. Another kind of bionic device was based on animal leg structure and showed outstanding performance in low frequency vibration reduction. Finally, we briefly listed the problems that need to be solved in current bionic vibration control technology and gave recommendations for future research direction.

Evolutionary versatility of the avian neck

Bird necks display unparalleled levels of morphological diversity compared to other vertebrates, yet it is unclear what factors have structured this variation. Using three-dimensional geometric morphometrics and multivariate statistics, we show that the avian cervical column is a hierarchical morpho-functional appendage, with varying magnitudes of ecologically driven osteological variation at different scales of organization. Contrary to expectations given the widely varying ecological functions of necks in different species, we find that regional modularity of the avian neck is highly conserved, with an overall structural blueprint that is significantly altered only by the most mechanically demanding ecological functions. Nevertheless, the morphologies of vertebrae within subregions of the neck show more prominent signals of adaptation to ecological pressures. We also find that both neck length allometry and the nature of neck elongation in birds are different from other vertebrates. In contrast with mammals, neck length scales isometrically with head mass and, contrary to previous work, we show that neck elongation in birds is achieved predominantly by increasing vertebral lengths rather than counts. Birds therefore possess a cervical spine that may be unique in its versatility among extant vertebrates, one that, since the origin of flight, has adapted to function as a surrogate forelimb in varied ecological niches.

Pushing the boundary? Testing the "functional elongation hypothesis" of the giraffe's neck

Although giraffes maintain the usual mammalian cervical number of seven vertebrae, their first thoracic vertebra (T1) exhibits aberrant anatomy and has been hypothesized to functionally elongate the neck. We test this "functional elongation hypothesis" by combining phylogenetically informed analyses of neck length, three-dimensional (3D) vertebral shape, and of the functional significance of shape differences across a broad sample of ruminants and camelids. Digital bone models of the cervicothoracic transition were subjected to 3D geometric morphometric analysis revealing how the shape of the seventh cervical (C7) has converged in several long-necked species. However, we find a unique "cervicalization" of the giraffe's T1. In contrast, we demonstrate a "thoracalization" of C7 for the European bison. Other giraffids (okapi and extinct Sivatherium) did not exhibit "cervicalized" T1 morphology. Quantitative range of motion (ROM) analysis at the cervicothoracic transition in ruminants and camelids confirms the "functional elongation hypothesis" for the giraffe in terms of increased mobility, especially with regard to dorsoventral flexion/extension. Additionally, other factors related to the unique morphology of the giraffe's cervicothoracic transition such as neck posture and intervertebral stability are discussed and should be considered in future studies of giraffe neck evolution.

Moving legs: A workflow on how to generate a flexible endopod of the 518 million-year-old Chengjiang arthropod Ercaicunia multinodosa using 3D-kinematics (Cambrian, China)

Understanding the functional morphology and mobility of appendages of fossil animals is important for exploring ecological traits such as feeding and locomotion. Previous work on fossils from the 518 million-year-old Chengjiang biota of China was based mainly on two-dimensional information captured from the surface of the specimens. Only recently, μCT techniques started to reveal almost the entire, though flattened and compressed, three-dimensionally preserved morphologies of the arthropods from Chengjiang. This allows more accurate work on reconstructing the possible movement of certain structures such as the appendages. Here, we present a workflow on how to reconstruct the mobility of a limb of the early Chengjiang arthropod Ercaicunia multinodosa from the famous Chinese fossil site. Based on μCT scans of the fossil, we rendered surface models of the 13th-15th right endopods using the 3D visualization and 3D-rendering software Amira. The 3D objects then were postprocessed (Collapse Hierarchy, Unify Normals) in SAP 3D Visual Enterprise Author before being imported into the 3D animation program Autodesk Maya 2020. Using the add-on tool X_ROMM in Maya, we illustrate step-by-step on how to make the articles of the limbs swing-in toward each other. Eventually, we propose several possible limb movements of E. multinodosa, which helps to understand how this early arthropod could have moved its endopods.

Neck mobility in the Jurassic plesiosaur Cryptoclidus eurymerus: finite element analysis as a new approach to understanding the cervical skeleton in fossil vertebrates

The sauropterygian clade Plesiosauria arose in the Late Triassic and survived to the very end of the Cretaceous. Plesiosauria evolved the greatest species diversity of any marine reptile clade, attaining a global distribution. Plesiosauria consist of two clades, Rhomaleosauridae and Neoplesiosauria. Basal Neoplesiosauria have long necks with at least 30 cervicals, but show qualitative osteological evidence for a stiff neck. Here we quantify neck mobility in lateral, ventral, and dorsal directions based on finite element modeling of neck vertebrae from the Middle Jurassic plesiosaur Cryptoclidus eurymerus. We model the mobility in a single motion segment, consisting of two adjacent cervical vertebrae and the joints connecting them. Based on the model with a maximum intervertebral spacing of 3 mm, we find that in Cryptoclidus, the maximum angle of lateral deflection in the motion segment was 2°. The maximum angle of ventral deflection was 5° and of dorsal deflection was 5°. When these values are multiplied by the number of cervical vertebrae, it becomes apparent that neck mobility was limited in all directions. The maximum angle of total lateral deflection in the neck was 67°. The maximum angle of total ventral deflection was 148° and of total dorsal deflection was 157°. This raises the question of the function of such a long, multi-segment but immobile neck. We posit that the long neck served in hydrodynamic and visual camouflage, hiding the bulk of the body from the small but abundant prey, such as schooling fish and squid. Neck immobility may have been advantageous in withstanding strong hydrodynamic forces acting on the neck during predatory strikes.

Radiographic anatomy of the cockatiel (Nymphicus hollandicus) axial and appendicular skeleton

Cockatiels are popular pets. Still, despite medical and surgical relevance, the radiographic anatomy of the cockatiel (Nymphicus hollandicus) skeleton, like that of different wild and exotic bird species, has seldom been described. This study set out to describe the radiographic anatomy of the cockatiel skeleton. Twelve adult male and nine adult female specimens were radiographed using a digital X-ray system and different views. The radiographic anatomy of these birds was similar to that of other Psittacidae. However, some particularities inherent to the target species were detected, such as the presence of four flexion zones in the skull (craniofacial, nasal, jugal arch and palatine), complete bony orbit comprising a suborbital arch, 34-38 vertebrae (10 or 11 cervical, 8 or 9 thoracic, 9 or 10 lumbosacral, 5 or 6 caudal vertebrae and a pygostyle comprising 2 fused vertebrae), eight or nine pairs of ribs and a notarium made up of fused T2-T6 vertebrae. Poor radiopacity of the notarium, ribs and respective uncinate processes, and synsacral vertebrae made demarcation of these structures difficult. The appendicular skeleton of the cockatiel was very similar to that of other Psittacidae, and there were no gender-related differences.

Correlated evolution of neck length and leg length in birds

Despite a diversity of about 10 000 extant species, the sophisticated avian 'body plan' has not much changed once it was achieved around 160 Ma after the origin of powered flight. All birds are bipedal having wings, a rigid trunk, a short and ossified tail, a three-segmented leg and digitigrade feet. The avian neck, however, has always been regarded as a classic example of high variability ranging from short necks in songbirds to extremely long, serpentine necks in herons. Yet, the wide array of small to very large species makes it difficult to evaluate the actual neck length. Here, we investigate the evolution of the vertebral formulae in the neck of birds and the scaling relationships between skeletal dimensions and body size. Cervical count in birds is strongly related to phylogeny, with only some specialists having an exceptional number of vertebrae in the neck. In contrast with mammals, the length of the cervical vertebral column increases as body size increases and, thus, body size does not constrain neck length in birds. Indeed, neck length scales isometrically with total leg length suggesting a correlated evolution between both modules. The strong integration between the cervical and pelvic module in birds is in contrast with the decoupling of the fore- and hindlimb module and may be the result of the loss of a functionally versatile forelimb due to the evolution of powered flight.

Homeotic transformations reflect departure from the mammalian 'rule of seven' cervical vertebrae in sloths: inferences on the Hox code and morphological modularity of the mammalian neck

Background

Sloths are one of only two exceptions to the mammalian ‘rule of seven’ vertebrae in the neck. As a striking case of breaking the evolutionary constraint, the explanation for the exceptional number of cervical vertebrae in sloths is still under debate. Two diverging hypotheses, both ultimately linked to the low metabolic rate of sloths, have been proposed: hypothesis 1 involves morphological transformation of vertebrae due to changes in the Hox gene expression pattern and hypothesis 2 assumes that the Hox gene expression pattern is not altered and the identity of the vertebrae is not changed. Direct evidence supporting either hypothesis would involve knowledge of the vertebral Hox code in sloths, but the realization of such studies is extremely limited. Here, on the basis of the previously established correlation between anterior Hox gene expression and the quantifiable vertebral shape, we present the morphological regionalization of the neck in three different species of sloths with aberrant cervical count providing indirect insight into the vertebral Hox code.

Results

Shape differences within the cervical vertebral column suggest a mouse-like Hox code in the neck of sloths. We infer an anterior shift of HoxC-6 expression in association with the first thoracic vertebra in short-necked sloths with decreased cervical count, and a posterior shift of HoxC-5 and HoxC-6 expression in long-necked sloths with increased cervical count.

Conclusion

Although only future developmental analyses in non-model organisms, such as sloths, will yield direct evidence for the evolutionary mechanism responsible for the aberrant number of cervical vertebrae, our observations lend support to hypothesis 1 indicating that the number of modules is retained but their boundaries are displaced. Our approach based on quantified morphological differences also provides a reliable basis for further research including fossil taxa such as extinct ‘ground sloths’ in order to trace the pattern and the underlying genetic mechanisms in the evolution of the vertebral column in mammals.

Electronic supplementary material

The online version of this article (10.1186/s12862-018-1202-5) contains supplementary material, which is available to authorized users.

Neck function in early hominins and suspensory primates: Insights from the uncinate process

OBJECTIVES

Uncinate processes are protuberances on the cranial surface of subaxial cervical vertebrae that assist in stabilizing and guiding spinal motion. Shallow uncinate processes reduce cervical stability but confer an increased range of motion in clinical studies. Here we assess uncinate processes among extant primates and model cervical kinematics in early fossil hominins.

MATERIALS AND METHODS

We compare six fossil hominin vertebrae with 48 Homo sapiens and 99 nonhuman primates across 20 genera. We quantify uncinate morphology via geometric morphometric methods to understand how uncinate process shape relates to allometry, taxonomy, and mode of locomotion.

RESULTS

Across primates, allometry explains roughly 50% of shape variation, as small, narrow vertebrae feature the relatively tallest, most pronounced uncinate processes, whereas larger, wider vertebrae typically feature reduced uncinates. Taxonomy only weakly explains the residual variation, however, the association between Uncinate Shape and mode of locomotion is robust, as bipeds and suspensory primates occupy opposite extremes of the morphological continuum and are distinguished from arboreal generalists. Like humans, Australopithecus afarensis and Homo erectus exhibit shallow uncinate processes, whereas A. sediba resembles more arboreal taxa, but not fully suspensory primates.

DISCUSSION

Suspensory primates exhibit the most pronounced uncinates, likely to maintain visual field stabilization. East African hominins exhibit reduced uncinate processes compared with African apes and A. sediba, likely signaling different degrees of neck motility and modes of locomotion. Although soft tissues constrain neck flexibility beyond limits suggested by osteology alone, this study may assist in modeling cervical kinematics and positional behaviors in extinct taxa.

From biokinematics to a robotic active vision system

Barn owls move their heads in very particular motions, compensating for the quasi-immovability of their eyes. These efficient predators often perform peering side-to-side head motions when scanning their surroundings and seeking prey. In this work, we use the head movements of barn owls as a model to bridge between biological active vision and machine vision. The biomotions are measured and used to actuate a specially built robot equipped with a depth camera for scanning. We hypothesize that the biomotions improve scan accuracy of static objects. Our experiments show that barn owl biomotion-based trajectories consistently improve scan accuracy when compared to intuitive scanning motions. This constitutes proof-of-concept evidence that the vision of robotic systems can be enhanced by bio-inspired viewpoint manipulation. Such biomimetic scanning systems can have many applications, e.g. manufacturing inspection or in autonomous robots.

Experimental determination of three-dimensional cervical joint mobility in the avian neck

Background

Birds have highly mobile necks, but neither the details of how they realize complex poses nor the evolution of this complex musculoskeletal system is well-understood. Most previous work on avian neck function has focused on dorsoventral flexion, with few studies quantifying lateroflexion or axial rotation. Such data are critical for understanding joint function, as musculoskeletal movements incorporate motion around multiple degrees of freedom simultaneously. Here we use biplanar X-rays on wild turkeys to quantify three-dimensional cervical joint range of motion in an avian neck to determine patterns of mobility along the cranial-caudal axis.

Results

Range of motion can be generalized to a three-region model: cranial joints are ventroflexed with high axial and lateral mobility, caudal joints are dorsiflexed with little axial rotation but high lateroflexion, and middle joints show varying amounts axial rotation and a low degree of lateroflexion. Nonetheless, variation within and between regions is high. To attain complex poses, substantial axial rotation can occur at joints caudal to the atlas/axis complex and zygapophyseal joints can reduce their overlap almost to osteological disarticulation. Degrees of freedom interact at cervical joints; maximum lateroflexion occurs at different dorsoventral flexion angles at different joints, and axial rotation and lateroflexion are strongly coupled. Further, patterns of joint mobility are strongly predicted by cervical morphology.

Conclusion

Birds attain complex neck poses through a combination of mobile intervertebral joints, coupled rotations, and highly flexible zygapophyseal joints. Cranial-caudal patterns of joint mobility are tightly linked to cervical morphology, such that function can be predicted by form. The technique employed here provides a repeatable protocol for studying neck function in a broad array of taxa that will be directly comparable. It also serves as a foundation for future work on the evolution of neck mobility along the line from non-avian theropod dinosaurs to birds.

Electronic supplementary material

The online version of this article (doi:10.1186/s12983-017-0223-z) contains supplementary material, which is available to authorized users.

Barn owls maximize head rotations by a combination of yawing and rolling in functionally diverse regions of the neck

Owls are known for their outstanding neck mobility: these birds can rotate their heads more than 270°. The anatomical basis of this extraordinary neck rotation ability is not well understood. We used X-ray fluoroscopy of living owls as well as forced neck rotations in dead specimens and computer tomographic (CT) reconstructions to study how the individual cervical joints contribute to head rotation in barn owls (Tyto furcata pratincola). The X-ray data showed the natural posture of the neck, and the reconstructions of the CT-scans provided the shapes of the individual vertebrae. Joint mobility was analyzed in a spherical coordinate system. The rotational capability was described as rotation about the yaw and roll axes. The analyses suggest a functional division of the cervical spine into several regions. Most importantly, an upper region shows high rolling and yawing capabilities. The mobility of the lower, more horizontally oriented joints of the cervical spine is restricted mainly to the roll axis. These rolling movements lead to lateral bending, effectively resulting in a side shift of the head compared with the trunk during large rotations. The joints in the middle of the cervical spine proved to contribute less to head rotation. The analysis of joint mobility demonstrated how owls might maximize horizontal head rotation by a specific and variable combination of yawing and rolling in functionally diverse regions of the neck.

Kinematic constituents of the extreme head turn of Strix aluco estimated by means of CT-scanning

To analyze extreme sideways turn of the head in owls, a total fresh specimen of Strix aluco was frozen in respective posture and CT-scanned. The maximum turn to one side was found to be 360°, provided that the head is drawn into the shoulders. 160° of this full turn are ensured by the neck axial rotation (this includes ~90° twist of the head relative to epistropheus and, posterior to it, less than 15° per every cervical joint), and the rest 200° are ensured by combination of dorsal and lateral flexion. The 15° limit is overcome in five joints in respect of dorsiflexion, and in six joints in respect of lateral flexion. So large a degree of lateral mobility is unusual among birds, and is appreciated as a crucial adaptation to extreme head turning.

Descrição anatômica de esqueletos de papagaios do gênero Amazona através da utilização de radiografias

Resumo: O esqueleto de papagaios da espécie Amazona aestiva foi descrito e comparado com representantes de outras espécies do gênero Amazona. Para tanto, foram utilizados 22 exemplares da espécie Amazona aestiva; dois das espécies Amazona vinacea; Amazona rhodocorythae, Amazona farinosa, além de um exemplar das espécies Amazona brasiliensis e Amazona pretrei, doados após morte natural pelo Criadouro Poços de Caldas. Foram realizadas radiografias de corpo inteiro, variando de decúbito lateral direito ou esquerdo, no caso das projeções latero-laterais, e em decúbito dorsal, no caso da projeção ventro-dorsal. Independentemente da espécie, os crânios dos papagaios estudados puderam ser classificados como pró-cinéticos, por apresentarem liberdade de movimentos em sua porção rostral. Na maioria dos casos, a coluna vertebral esteve formada por 12 vértebras cervicais, seis vértebras torácicas livres, sinsacro (formado pela fusão da última vértebra torácica, 7 lombosacrais e uma caudal), cinco vértebras caudais livres e pelo pigóstilo (formado por três vértebras caudais fusionadas) e, apesar de diferenças pontuais, o esqueleto apendicular torácico e pélvico se mostrou muito semelhante ao observado para outros gêneros de aves e, inclusive, não foi possível observar dimorfismo sexual através das características anatômicas dos esqueletos dos papagaios trabalhados.

FORMAÇÃO E DISTRIBUIÇÃO DO PLEXO BRAQUIAL EM PAPAGAIOS VERDADEIROS (Amazona aestiva, Linnaeus, 1758)

<title>Resumo</title><p>Procedimentos anestésicos locais são realizados comumente em aves domésticas e silvestres, por ser de baixo custo e de rápida indução, desde que feitos com precisão, o que requer conhecimento anatômico específico da área a ser operada. Este trabalho objetivou estabelecer a origem e a distribuição do plexo braquial do papagaio verdadeiro (<italic>Amazona aestiva</italic>), através da dissecação da pele e da musculatura de 22 papagaios (17 machos e 5 fêmeas), provenientes do Centro de Triagem de Animais Silvestres do Distrito Federal, após óbito motivado por causas naturais, promovendo o isolamento das raízes formadoras do plexo braquial, bem como de sua ramificação. O plexo braquial foi formado através de quatro troncos, envolvendo os ramos ventrais dos segmentos medulares de C9 a C10, C10 a C11, C11 a T1 e T1 a T2, que se uniram em um curto tronco comum, ramificado em cordões dorsal e ventral. O tronco comum emitiu os delgados nervos subcoracóide e subescapular, além do ramo para o músculo escapuloumeral. O cordão dorsal deu origem aos nervos anconeal, axilar e radial, e o cordão ventral, os nervos peitoral cranial, peitoral caudal, coracobraquial e medianoulnar, cujos ramos supriram os músculos dos compartimentos extensor e flexor do membro torácico, músculos peitorais e pele sobrejacente.</p>

Muscular Arrangement and Muscle Attachment Sites in the Cervical Region of the American Barn Owl (Tyto furcata pratincola)

Owls have the largest head rotation capability amongst vertebrates. Anatomical knowledge of the cervical region is needed to understand the mechanics of these extreme head movements. While data on the morphology of the cervical vertebrae of the barn owl have been provided, this study is aimed to provide an extensive description of the muscle arrangement and the attachment sites of the muscles on the owl’s head-neck region. The major cervical muscles were identified by gross dissection of cadavers of the American barn owl (Tyto furcata pratincola), and their origin, courses, and insertion were traced. In the head-neck region nine superficial larger cervical muscles of the craniocervical, dorsal and ventral subsystems were selected for analysis, and the muscle attachment sites were illustrated in digital models of the skull and cervical vertebrae of the same species as well as visualised in a two-dimensional sketch. In addition, fibre orientation and lengths of the muscles and the nature (fleshy or tendinous) of the attachment sites were determined. Myological data from this study were combined with osteological data of the same species. This improved the anatomical description of the cervical region of this species. The myological description provided in this study is to our best knowledge the most detailed documentation of the cervical muscles in a strigiform species presented so far. Our results show useful information for researchers in the field of functional anatomy, biomechanical modelling and for evolutionary and comparative studies.