Hydrogel-Forming Microneedle Arrays Allow Detection of Drugs and Glucose In Vivo: Potential for Use in Diagnosis and Therapeutic Drug Monitoring

Integrating microneedles and sensing strategies for diagnostic and monitoring applications: The state of the art

Microneedles (MNs) offer minimally-invasive access to interstitial fluid (ISF) - a potent alternative to blood in terms of monitoring physiological analytes. This property is particularly advantageous for the painless detection and monitoring of drugs and biomolecules. However, the complexity of the skin environment, coupled with the inherent nature of the analytes being detected and the inherent physical properties of MNs, pose challenges when conducting physiological monitoring using this fluid. In this review, we discuss different sensing mechanisms and highlight advancements in monitoring different targets, with a particular focus on drug monitoring. We further list the current challenges facing the field and conclude by discussing aspects of MN design which serve to enhance their performance when monitoring different classes of analytes.

Advances in microneedles for transdermal diagnostics and sensing applications

Microneedles, the miniaturized needles, which can pierce the skin with minimal invasiveness open up new possibilities for constructing personalized Point-of-Care (POC) diagnostic platforms. Recent advances in microneedle-based POC diagnostic systems, especially their successful implementation with wearable technologies, enable biochemical detection and physiological recordings in a user-friendly manner. This review presents an overview of the current advances in microneedle-based sensor devices, with emphasis on the biological basis of transdermal sensing, fabrication, and application of different types of microneedles, and a summary of microneedle devices based on various sensing strategies. It concludes with the challenges and future prospects of this swiftly growing field. The aim is to present a critical and thorough analysis of the state-of-the-art development of transdermal diagnostics and sensing devices based on microneedles, and to bridge the gap between microneedle technology and pragmatic applications.

Swellable Microneedles in Drug Delivery and Diagnostics

This manuscript explores the transformative potential of swellable microneedles (MNs) in drug delivery and diagnostics, addressing critical needs in medical treatment and monitoring. Innovations in hydrogel-integrated MN arrays facilitate controlled drug release, thereby expanding treatment options for chronic diseases and conditions that require precise dosage control. The review covers challenges, such as scalability, patient compliance, and manufacturing processes, as well as achievements in advanced manufacturing, biocompatibility, and versatile applications. Nonetheless, limitations in physiological responsiveness and long-term stability remain, necessitating further research in material innovation and integration with digital technologies. Future directions focus on expanding biomedical applications, material advancements, and regulatory considerations for widespread clinical adoption.

Diagnostic, Therapeutic, and Theranostic Multifunctional Microneedles

Microneedles (MNs) have maintained their popularity in therapeutic and diagnostic medical applications throughout the past decade. MNs are originally designed to gently puncture the stratum corneum layer of the skin and have lately evolved into intelligent devices with functions including bodily fluid extraction, biosensing, and drug administration. MNs offer limited invasiveness, ease of application, and minimal discomfort. Initially manufactured solely from metals, MNs are now available in polymer-based varieties. MNs can be used to create systems that deliver drugs and chemicals uniformly, collect bodily fluids, and are stimulus-sensitive. Although these advancements are favorable in terms of biocompatibility and production costs, they are insufficient for the therapeutic use of MNs. This is the first comprehensive review that discusses individual MN functions toward the evolution and development of smart and multifunctional MNs for a variety of novel and impactful future applications. The study examines fabrication techniques, application purposes, and experimental details of MN constructs that perform multiple functions concurrently, including sensing, drug-molecule release, sampling, and remote communication capabilities. It is highly likely that in the near future, MN-based smart devices will be a useful and important component of standard medical practice for different applications.

Nanocarrier-Integrated Microneedles: Divulging the Potential of Novel Frontiers for Fostering the Management of Skin Ailments

The various kinds of nanocarriers (NCs) have been explored for the delivery of therapeutics designed for the management of skin manifestations. The NCs are considered as one of the promising approaches for the skin delivery of therapeutics attributable to sustained release and enhanced skin penetration. Despite the extensive applications of the NCs, the challenges in their delivery via skin barrier (majorly stratum corneum) have persisted. To overcome all the challenges associated with the delivery of NCs, the microneedle (MN) technology has emerged as a beacon of hope. Programmable drug release, being painless, and its minimally invasive nature make it an intriguing strategy to circumvent the multiple challenges associated with the various drug delivery systems. The integration of positive traits of NCs and MNs boosts therapeutic effectiveness by evading stratum corneum, facilitating the delivery of NCs through the skin and enhancing their targeted delivery. This review discusses the barrier function of skin, the importance of MNs, the types of MNs, and the superiority of NC-loaded MNs. We highlighted the applications of NC-integrated MNs for the management of various skin ailments, combinational drug delivery, active targeting, in vivo imaging, and as theranostics. The clinical trials, patent portfolio, and marketed products of drug/NC-integrated MNs are covered. Finally, regulatory hurdles toward benchtop-to-bedside translation, along with promising prospects needed to scale up NC-integrated MN technology, have been deliberated. The current review is anticipated to deliver thoughtful visions to researchers, clinicians, and formulation scientists for the successful development of the MN-technology-based product by carefully optimizing all the formulation variables.

Advancements in Skin-Mediated Drug Delivery: Mechanisms, Techniques, and Applications

Skin-mediated drug delivery methods currently are receiving significant attention as a promising approach for the enhanced delivery of drugs through the skin. Skin-mediated drug delivery offers the potential to overcome the limitations of traditional drug delivery methods, including oral administration and intravenous injection. The challenges associated with drug permeation through layers of skin, which act as a major barrier, are explored, and strategies to overcome these limitations are discussed in detail. This review categorizes skin-mediated drug delivery methods based on the means of increasing drug permeation, and it provides a comprehensive overview of the mechanisms and techniques associated with these methods. In addition, recent advancements in the application of skin-mediated drug delivery are presented. The review also outlines the limitations of ongoing research and suggests future perspectives of studies regarding the skin-mediated delivery of drugs.

Advances in biomedical systems based on microneedles: design, fabrication, and application

Wearable devices have become prevalent in biomedical studies due to their convenient portability and potential utility in biomarker monitoring for healthcare. Accessing interstitial fluid (ISF) across the skin barrier, microneedle (MN) is a promising minimally invasive wearable technology for transdermal sensing and drug delivery. MN has the potential to overcome the limitations of conventional transdermal drug administration, making it another prospective mode of drug delivery after oral and injectable. Subsequently, combining MN with multiple sensing approaches has led to its extensive application to detect biomarkers in ISF. In this context, employing MN platforms and control schemes to merge diagnostic and therapeutic capabilities into theranostic systems will facilitate on-demand therapy and point-of-care diagnostics, paving the way for future MN technologies. A comprehensive analysis of the growing advances of microneedles in biomedical systems is presented in this review to summarize the latest studies for academics in the field and to offer for reference the issues that need to be addressed in MN application for healthcare. Covering an array of novel studies, we discuss the following main topics: classification of microneedles in the biomedical field, considerations of MN design, current applications of microneedles in diagnosis and therapy, and the regulatory landscape and prospects of microneedles for biomedical applications. This review sheds light on the significance of microneedle-based innovations, presenting an analysis of their potential implications and contributions to the community of wearable healthcare technologies. The review provides a comprehensive understanding of the field's current state and potential, making it a valuable resource for academics and clinicians seeking to harness the full potential of MN applications.

Dissolving and Swelling Hydrogel-Based Microneedles: An Overview of Their Materials, Fabrication, Characterization Methods, and Challenges

Polymeric hydrogels are a complex class of materials with one common feature-the ability to form three-dimensional networks capable of imbibing large amounts of water or biological fluids without being dissolved, acting as self-sustained containers for various purposes, including pharmaceutical and biomedical applications. Transdermal pharmaceutical microneedles are a pain-free drug delivery system that continues on the path to widespread adoption-regulatory guidelines are on the horizon, and investments in the field continue to grow annually. Recently, hydrogels have generated interest in the field of transdermal microneedles due to their tunable properties, allowing them to be exploited as delivery systems and extraction tools. As hydrogel microneedles are a new emerging technology, their fabrication faces various challenges that must be resolved for them to redeem themselves as a viable pharmaceutical option. This article discusses hydrogel microneedles from a material perspective, regardless of their mechanism of action. It cites the recent advances in their formulation, presents relevant fabrication and characterization methods, and discusses manufacturing and regulatory challenges facing these emerging technologies before their approval.

Microneedle-based glucose monitoring: a review from sampling methods to wearable biosensors

Blood glucose (BG) monitoring is critical for diabetes management. In recent years, microneedle (MN)-based technology has attracted emerging attention in glucose sensing and detection. In this review, we summarized MN-based sampling for glucose collection and glucose analysis in detail. First, different principles of MN-based biofluid extraction were elaborated, including external negative pressure, capillary force, swelling force and iontophoresis, which would guide the shape design and material optimization of MNs. Second, MNs coupled with different analysis approaches, including Raman methods, colorimetry, fluorescence, and electrochemical sensing, were emphasized to exhibit the trend towards highly integrated wearable sensors. Finally, the future development prospects of MN-based devices were discussed.

Advances and Prospects for Hydrogel-Forming Microneedles in Transdermal Drug Delivery

Transdermal drug delivery (TDD) is one of the key approaches for treating diseases, avoiding first-pass effects, reducing systemic adverse drug reactions and improving patient compliance. Microneedling, iontophoresis, electroporation, laser ablation and ultrasound facilitation are often used to improve the efficiency of TDD. Among them, microneedling is a relatively simple and efficient means of drug delivery. Microneedles usually consist of micron-sized needles (50-900 μm in length) in arrays that can successfully penetrate the stratum corneum and deliver drugs in a minimally invasive manner below the stratum corneum without touching the blood vessels and nerves in the dermis, improving patient compliance. Hydrogel-forming microneedles (HFMs) are safe and non-toxic, with no residual matrix material, high drug loading capacity, and controlled drug release, and they are suitable for long-term, multiple drug delivery. This work reviewed the characteristics of the skin structure and TDD, introduced TDD strategies based on HFMs, and summarized the characteristics of HFM TDD systems and the evaluation methods of HFMs as well as the application of HFM drug delivery systems in disease treatment. The HFM drug delivery system has a wide scope for development, but the translation to clinical application still has more challenges.

Recent advancements in the expedition of microneedles: from lab worktops to diagnostic care centers

Microneedle (MN) technology plays a significant role in bioengineering as it allows for minimally invasive exposure to the skin via the non-invasive procedure, increased drug permeability, and improved biological molecule detectability in the epidermal layers, all while improving therapeutic safety and effectiveness. However, MNs have several significant drawbacks, including difficulty scaling up, variability in drug delivery pattern regarding the skin's external environment, blockage of dermal tissues, induction of inflammatory response at the administration site, and limitation of dosing based on the molecular weight of drug and size. Despite these drawbacks, MNs have emerged as a special transdermal theranostics instrument in clinical research to assess physiological parameters. Bioimaging technology relies on microneedles that can measure particular analytes in the extracellular fluid effectively by crossing the stratum corneum, making them "a unique tool in diagnostics detection and therapeutic application inside the body." This review article discusses the recent advances in the applications especially related to the diagnostics and toxicity challenges of microneedles. In addition, this review article discusses the clinical state and commercial accessibility of microneedle technology-based devices in order to provide new information to scientists and researchers.

Hydrogel-Forming Microneedles with Applications in Oral Diseases Management

Controlled drug delivery in the oral cavity poses challenges such as bacterial contamination, saliva dilution, and inactivation by salivary enzymes upon ingestion. Microneedles offer a location-specific, minimally invasive, and retentive approach. Hydrogel-forming microneedles (HFMs) have emerged for dental diagnostics and therapeutics. HFMs penetrate the stratum corneum, undergo swelling upon contact, secure attachment, and enable sustained transdermal or transmucosal drug delivery. Commonly employed polymers such as polyvinyl alcohol (PVA) and polyvinyl pyrrolidone are crosslinked with tartaric acid or its derivatives while incorporating therapeutic agents. Microneedle patches provide suture-free and painless drug delivery to keratinized or non-keratinized mucosa, facilitating site-specific treatment and patient compliance. This review comprehensively discusses HFMs' applications in dentistry such as local anesthesia, oral ulcer management, periodontal treatment, etc., encompassing animal experiments, clinical trials, and their fundamental impact and limitations, for example, restricted drug carrying capacity and, until now, a low number of dental clinical trial reports. The review explores the advantages and future perspectives of HFMs for oral drug delivery.

Development of a novel microneedle platform for biomarker assessment of atopic dermatitis patients

BACKGROUND

Atopic dermatitis (AD) is a chronic inflammatory skin disease whose pathogenesis, cause, and treatment have been extensively studied. The association of AD with Th2 cytokines is well known; therefore, the analysis of this association is crucial for the diagnosis and treatment of AD. This study aimed to present a new method for measuring protein biomarkers in patients with AD, before and after treatment, using minimally invasive microneedles.

MATERIALS AND METHODS

First, hyaluronic acid-loaded microneedle patches (HA-MNs) for skin sample collection were fabricated. Next, after Institutional Review Board approval, 20 patients with AD were recruited and skin samples were taken before and after treatment using four different sampling techniques: (1) tape stripping, (2) hydrocolloid patches, (3) hollow microneedles, and (4) HA-MNs. Lastly, proteins were isolated from the collected samples, and AD-related biomarkers were analyzed by enzyme-linked immunosorbent assay.

RESULTS

Proteins were successfully extracted from the skin samples collected by tape stripping, hydrocolloid patches, and HA-MNs, except hollow microneedles. Interleukin (IL)-4, IL-13, and interferon-γ were detected in the HA-MNs only. By comparing the biomarker level correlation before and after treatment and the improvement score of the patients, we observed a significant negative correlation between IL-4 and IL-13 with an improvement in AD symptoms.

CONCLUSION

Overall, our results verified that HA-MNs can be used to effectively analyze protein levels of biomarkers from skin metabolites of patients with AD and can be applied to monitor the treatment progress of patients with AD in a minimally invasive manner.

Exploring new frontiers in drug delivery with minimally invasive microneedles: fabrication techniques, biomedical applications and regulatory aspects

INTRODUCTION

Transdermal drug delivery is limited by the stratum corneum, inhibiting the therapeutic potential of the permeants. Microneedles (MN) have opened new frontiers in transdermal drug delivery systems. These micro-sized needles offer painless and accentuated delivery of drugs even with high molecular weights.

AREAS COVERED

The review embodies drug delivery strategies with microneedles with a description of MN types and fabrication techniques using various materials. The application of MN is not limited to drug delivery, but it also encompasses in vaccine delivery, diagnosis, phlebotomy and even in the cosmetic industry. The review also tabulates microneedle-based marketed formulations. In a nutshell, we aim to present a panoramic view of microneedles including the design, applications, and regulatory aspects of MN.

EXPERT OPINION

With the availability of numerous materials at the disposal of pharmaceutical scientists; the microneedle-based drug delivery technology has offered significant interventions towards the management of chronic maladies including cardiovascular disorders, diabetes, asthma, mental depression, etc. As happens with any new technology there are concerns with MN also such as biocompatibility issues with the material used for the fabrication. Nevertheless, the pharmaceutical industry must strive for preparing harmless, efficient, and cost-effective MN based delivery systems for wider acceptance and patient compliance.

Response Surface Methodology for Optimization of Hydrogel-Forming Microneedles as Rapid and Efficient Transdermal Microsampling Tools

Microneedles (MNs) have shown a great potential for the microsampling of dermal interstitial fluid (ISF) in a minimally invasive manner for point-of-care testing (POCT). The swelling properties of hydrogel-forming microneedles (MNs) allow for passive extraction of ISF. Surface response approaches, including Box-Behnken design (BBD), central composite design (CCD), and optimal discrete design, were employed for the optimization of hydrogel film by studying the effects of independent variables (i.e., the amount of hyaluronic acid, GantrezTM S-97, and pectin) on the swelling property. The optimal discrete model was selected to predict the appropriate variables, due to the good fit of the experimental data and the model validity. The analysis of variance (ANOVA) of the model demonstrated p-value < 0.0001, R2 = 0.9923, adjusted R2 = 0.9894, and predicted R2 = 0.9831. Finally, the predicted film formulation containing 2.75% w/w hyaluronic acid, 1.321% w/w GantrezTM S-97, and 1.246% w/w pectin was used for further fabrication of MNs (525.4 ± 3.8 µm height and 157.4 ± 2.0 µm base width), which possessed 1508.2 ± 66.2% swelling, with 124.6 ± 7.4 µL of collection volume, and could withstand thumb pressure. Moreover, almost 50% of MNs achieved a skin insertion depth of approx. 400 µm, with 71.8 ± 3.2% to 78.3 ± 2.6% recoveries. The developed MNs show a promising prospect in microsample collection, which would be beneficial for POCT.

Advances in dermatological application of GelMA hydrogel microneedles

BACKGROUND

Compared with systemic administration methods like injection and oral administration, traditional transdermal drug delivery has the advantages of rapid onset of activity and low side effects. However, hydrophilic drugs and bioactive substances are often unsuitable for traditional transdermal drug delivery.

METHODS

The application of microneedles made from gelatin methylacryloyl (GelMA) has greatly expanded thepossibilities for skin transdermal drug delivery. We have reviewed the latest literatures about the dermatological application of GelMA hydrogel microneedles in recent years using Google Scholar, PubMed and Springer.

RESULTS

GelMA hydrogel microneedles exhibit huge potency in the diagnosis and treatment of skin diseases, and this technology also brings broad application prospects for subcutaneous micro-invasive transdermal targeted drug delivery, which mainly used in skin tissue fluid collection, local substance delivery and wound healing.

CONCLUSION

With in-depth research on GelMA hydrogel, this technology will bring more breakthroughs and developments in the clinical diagnosis and treatment of skin diseases.

Microneedle-based interstitial fluid extraction for drug analysis: Advances, challenges, and prospects

Similar to blood, interstitial fluid (ISF) contains exogenous drugs and biomarkers and may therefore substitute blood in drug analysis. However, current ISF extraction techniques require bulky instruments and are both time-consuming and complicated, which has inspired the development of viable alternatives such as those relying on skin or tissue puncturing with microneedles. Currently, microneedles are widely employed for transdermal drug delivery and have been successfully used for ISF extraction by different mechanisms to facilitate subsequent analysis. The integration of microneedles with sensors enables in situ ISF analysis and specific compound monitoring, while the integration of monitoring and delivery functions in wearable devices allows real-time dose modification. Herein, we review the progress in drug analysis based on microneedle-assisted ISF extraction and discuss the related future opportunities and challenges.

Where Microneedle Meets Biomarkers: Futuristic Application for Diagnosing and Monitoring Localized External Organ Diseases

Extracellular tissue fluids are interesting biomatrices that have recently attracted scientists' interest. Many significant biomarkers for localized external organ diseases have been isolated from this biofluid. In the diagnostic and disease monitoring context, measuring biochemical entities from the fluids surrounding the diseased tissues may give more important clinical value than measuring them at a systemic level. Despite all these facts, pushing tissue fluid-based diagnosis and monitoring forward to clinical settings faces one major problem: its accessibility. Most extracellular tissue fluid, such as interstitial fluid (ISF), is abundant but hard to collect, and the currently available technologies are invasive and expensive. This is where novel microneedle technology can help tackle this significant obstacle. The ability of microneedle technology to minimally invasively access tissue fluid-containing biomarkers will enable ISF and other tissue fluid utilization in the clinical diagnosis and monitoring of localized diseases. This review attempts to present the current pursuit of the application of microneedle systems as a diagnostic and monitoring platform, along with the recent progress of biomarker detection in diagnosing and monitoring localized external organ diseases. Then, the potential use of various microneedles in future clinical diagnostics and monitoring of localized diseases is discussed by presenting the currently studied cases.

Metal-organic frameworks-based microtrapper for real-time monitoring of targeted analyte and mechanism study

Interstitial fluid (ISF) provides important information of clinical value and physiological significance beyond blood tests for obtaining more precise health information and disease theranostics. Generally, current strategies are limited to simple extraction with time-consuming follow-up procedures. Facing challenges in efficient and real-time monitoring of target analytes in transdermal ISF, we develop metal-organic framework (MOF)-functionalized microneedle (MN) patches to achieve efficient antibiotics sampling, coupling direct analysis in real time mass spectrometry (DART-MS). The MOF MN microtrapper is constructed in a double-layered structure with a hard core and a better tissue penetration was accomplished. The MOF-based microtrapper manifests good in-vitro and in-vivo antibiotics tracking capability with a semi-quantitative method established. Moreover, the hydrogen-bond driven interaction is clarified by using molecular dynamics simulations (MDS) and related computational analysis. Good penetration safety is confirmed by histological analysis with promising clinical transnationality. We anticipate MOF MN-based microdevices provide a versatile minimally invasive strategy for transdermal ISF extraction and an extendable platform for a range of target molecules monitoring, including drugs, metabolites, biomarkers, et c, with promising clinical transnationality.

Microarray patches: scratching the surface of vaccine delivery

INTRODUCTION

Microneedles are emerging as a promising technology for vaccine delivery, with numerous advantages over traditional needle and syringe methods. Preclinical studies have demonstrated the effectiveness of MAPs in inducing robust immune responses over traditional needle and syringe methods, with extensive studies using vaccines targeted against different pathogens in various animal models. Critically, the clinical trials have demonstrated safety, immunogenicity, and patient acceptance for MAP-based vaccines against influenza, measles, rubella, and SARS-CoV-2.

AREAS COVERED

This review provides a comprehensive overview of the different types of microarray patches (MAPs) and analyses of their applications in preclinical and clinical vaccine delivery settings. This review also covers additional considerations for microneedle-based vaccination, including adjuvants that are compatible with MAPs, patient safety and factors for global vaccination campaigns.

EXPERT OPINION

MAP vaccine delivery can potentially be a game-changer for vaccine distribution and coverage in both high-income and low- and middle-income countries. For MAPs to reach this full potential, many critical hurdles must be overcome, such as large-scale production, regulatory compliance, and adoption by global health authorities. However, given the considerable strides made in recent years by MAP developers, it may be possible to see the first MAP-based vaccines in use within the next 5 years.

Hydrogel-Based Biosensors

There is an increasing interest in sensing applications for a variety of analytes in aqueous environments, as conventional methods do not work reliably under humid conditions or they require complex equipment with experienced operators. Hydrogel sensors are easy to fabricate, are incredibly sensitive, and have broad dynamic ranges. Experiments on their robustness, reliability, and reusability have indicated the possible long-term applications of these systems in a variety of fields, including disease diagnosis, detection of pharmaceuticals, and in environmental testing. It is possible to produce hydrogels, which, upon sensing a specific analyte, can adsorb it onto their 3D-structure and can therefore be used to remove them from a given environment. High specificity can be obtained by using molecularly imprinted polymers. Typical detection principles involve optical methods including fluorescence and chemiluminescence, and volume changes in colloidal photonic crystals, as well as electrochemical methods. Here, we explore the current research utilizing hydrogel-based sensors in three main areas: (1) biomedical applications, (2) for detecting and quantifying pharmaceuticals of interest, and (3) detecting and quantifying environmental contaminants in aqueous environments.

A Conductive Hydrogel-Based Microneedle Platform for Real-Time pH Measurement in Live Animals

Conventional microneedles (MNs) have been extensively reported and applied toward a variety of biosensing and drug delivery applications. Hydrogel forming MNs with the added ability to electrically track health conditions in real-time is an area yet to be explored. The first conductive hydrogel microneedle (HMN) electrode that is capable of on-needle pH detection with no postprocessing required is presented here. The HMN array is fabricated using a swellable dopamine (DA) conjugated hyaluronic acid (HA) hydrogel, and is embedded with poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) to increase conductivity. The catechol-quinone chemistry intrinsic to DA is used to measure pH in interstitial fluid (ISF). The effect of PEDOT:PSS on the characteristics of the HMN array such as swelling capability and mechanical strength is fully studied. The HMN's capability for pH measurement is first demonstrated using porcine skin equilibrated with different pH solutions ranging from 3.5 to 9. Furthermore, the HMN-pH meter is capable of in vivo measurements with a 93% accuracy compared to a conventional pH probe meter. This HMN technology bridges the gap between traditional metallic electrochemical biosensors and the direct extraction of ISF, and introduces a platform for the development of polymeric wearable sensors capable of on-needle detection.

Surface potential modulation as a tool for mitigating challenges in SERS-based microneedle sensors

Raman spectroscopic-based biosensing strategies are often complicated by low signal and the presence of multiple chemical species. While surface-enhanced Raman spectroscopy (SERS) nanostructured platforms are able to deliver high quality signals by focusing the electromagnetic field into a tight plasmonic hot-spot, it is not a generally applicable strategy as it often depends on the specific adsorption of the analyte of interest onto the SERS platform. This paper describes a strategy to address this challenge by using surface potential as a physical binding agent in the context of microneedle sensors. We show that the potential-dependent adsorption of different chemical species allows scrutinization of the contributions of different chemical species to the final spectrum, and that the ability to cyclically adsorb and desorb molecules from the surface enables efficient application of multivariate analysis methods. We demonstrate how the strategy can be used to mitigate potentially confounding phenomena, such as surface reactions, competitive adsorption and the presence of molecules with similar structures. In addition, this decomposition helps evaluate criteria to maximize the signal of one molecule with respect to others, offering new opportunities to enhance the measurement of analytes in the presence of interferants.

Hydrogel-Crosslinked Microneedles Based on Microwave-Assisted Drying Method

We present a method and several applications for the synthesis of hydrogel-crosslinked microneedle arrays utilizing microwave-assisted drying, ensuring a significant reduction in reaction preparation time while maintaining quality. We demonstrate the feasibility of drying hydrogels using microwaves and thus extend to crosslinked microneedle fabrication. Crosslinking was performed using 1,4-butanediol diglycidyl ether (BDDE) as a crosslinking agent. Infrared spectra of the microneedle arrays were measured with attenuated total reflection-Fourier transform infrared (ATR-FTIR). The surface morphology of the microneedle arrays was observed with scanning electron microscopy (SEM). The microneedle arrays were evaluated in terms of mechanical strength, swelling kinetics, rheological properties, degradation rate, and glucose iontophoresis. The results show that this method can shorten the reaction preparation time by 5 hours, and the prepared crosslinked microneedle array has better crosslinking efficiency, swelling effect, and greater mechanical strength than traditional methods.

Hollow Microneedles on a Paper Fabricated by Standard Photolithography for the Screening Test of Prediabetes

Microneedle (MN) is a novel technique of the biomedical engineering field because of its ability to evaluate bioinformation via minimal invasion. One of the urgent requirements for ground-breaking health care monitoring is persistent monitoring. Hollow microneedles are extremely attractive to extract skin interstitial fluid (ISF) for analysis, which makes them perfect for sensing biomarkers and facilitating diagnosis. Nevertheless, its intricate fabrication process has hampered its extensive application. The present research demonstrates an easy one-step preparation approach for hollow MNs on the foundation of the refraction index variations of polyethylene glycol diacrylate (PEGDA) in the process of photopolymerization. The fabricated hollow microneedle exhibited ideal mechanical characteristics to penetrate the skin. Hydrodynamic simulations showed that the liquid was risen in a hollow microneedle by capillary force. Furthermore, a paper-based glucose sensor was integrated with the hollow microneedle. We also observed that the MN array smoothly extracted ISF in vitro and in vivo by capillary action. The outcomes displayed the applicability of the MN patch to persistent blood glucose (GLU) monitoring, diagnosis-related tests for patients and pre-diabetic individuals.

Research hotspot and trend of microneedles in biomedical field: A bibliometric analysis from 2011 to 2020

BACKGROUND

Microneedles composed of arrays of micro-sized needles assembled on a patch, has attracted increasing interest in transdermal drug delivery due to its ease of use and lack of painful responses. Here, a bibliometric analysis was conducted to determine a hotspot and trend of microneedles in the biomedical field.

METHODS

All relevant articles about microneedles between 2011 and 2020 were obtained from the databases of Web of Science (WOS) and PubMed of the National Center for Biotechnology Information (NCBI). A series of software such as VOSviwewer, the online bibliometric analysis website, CiteSpace, BICOMB and gCLUTO were used to process the data and get visual images. Processed data and visualized images were conducted to predict the trend of this research field.

RESULTS

The number of articles published over the last decade had increased rapidly (37 in 2011, 165 in 2020), the Journal of Controlled Release was the most productive journal in microneedle studies. The United States was the most productive country, while the Queens Univ Belfast topped the other institutions. Ryan F Donnelly was the most productive author in the field, while the two most cited articles were published by Gu Zhen group. More importantly, the research trend of microneedles had ranged from physicochemical properties and pharmacokinetics to insulin transdermal injection and vaccine development over the past decade. The four hot spots in microneedle studies, including skin rejuvenation, vaccines, fabrication technology and insulin delivery, were identified. Microneedle vaccination shows promising application prospects, and polymers are considered as the most promising materials for microneedles manufacturing.

CONCLUSIONS

This study will help researchers understand the hot spots and trends of microneedles in the biomedical field accurately and quickly. Moreover, the exploitation of novel polymeric microneedles will be a solid direction for subsequent research and development of transdermal drug delivery.

Recent Advancements in Microneedle Technology for Multifaceted Biomedical Applications

Microneedle (MNs) technology is a recent advancement in biomedical science across the globe. The current limitations of drug delivery, like poor absorption, low bioavailability, inadequate skin permeation, and poor biodistribution, can be overcome by MN-based drug delivery. Nanotechnology made significant changes in fabrication techniques for microneedles (MNs) and design shifted from conventional to novel, using various types of natural and synthetic materials and their combinations. Nowadays, MNs technology has gained popularity worldwide in biomedical research and drug delivery technology due to its multifaceted and broad-spectrum applications. This review broadly discusses MN’s types, fabrication methods, composition, characterization, applications, recent advancements, and global intellectual scenarios.

Polymer Coated Polymeric (PCP) microneedles for sampling of drugs and biomarkers from tissues

The polymer coated polymeric (PCP) microneedles were fabricated using PVP K30 in the core and ethyl cellulose in the coating. The PCP microneedles do not disintegrate in the tissue upon insertion and rather stays intact and allows diffusion of drugs and analytes across the membrane both inward and outward. In this project the potential use of PCP microneedles for sampling analytes from the dermal tissue was explored. The amount of analyte sampled depended on the concentration in the tissue, physicochemical properties of the analyte and duration of insertion of the array in the tissue. Further, an advanced type of PCP microneedle array was fabricated by entrapping absorbent beads in the core microneedles. The adsorbent enabled the PCP microneedles to recover significantly higher amount of analyte from the tissue.

The Role of 3D Printing Technology in Microengineering of Microneedles

Microneedles (MNs) are minimally invasive devices, which have gained extensive interest over the past decades in various fields including drug delivery, disease diagnosis, monitoring, and cosmetics. MN geometry and shape are key parameters that dictate performance and therapeutic efficacy, however, traditional fabrication methods, such as molding, may not be able to offer rapid design modifications. In this regard, the fabrication of MNs using 3D printing technology enables the rapid creation of complex MN prototypes with high accuracy and offers customizable MN devices with a desired shape and dimension. Moreover, 3D printing shows great potential in producing advanced transdermal drug delivery systems and medical devices by integrating MNs with a variety of technologies. This review aims to demonstrate the advantages of exploiting 3D printing technology as a new tool to microengineer MNs. Various 3D printing methods are introduced, and representative MNs manufactured by such approaches are highlighted in detail. The development of advanced MN devices is also included. Finally, clinical translation and future perspectives for the development of MNs using 3D printing are discussed.

Microneedle-Based Natural Polysaccharide for Drug Delivery Systems (DDS): Progress and Challenges

In this focused progress review, the most widely accepted methods of transdermal drug delivery are hypodermic needles, transdermal patches and topical creams. However, microneedles (MNs) (or microneedle arrays) are low-invasive 3D biomedical constructs that bypass the skin barrier and produce systemic and localized pharmacological effects. In the past, biomaterials such as carbohydrates, due to their physicochemical properties, have been extensively used to manufacture microneedles (MNs). Due to their wide range of functional groups, carbohydrates enable the design and development of tunable properties and functionalities. In recent years, numerous microneedle products have emerged on the market, although much research needs to be undertaken to overcome the various challenges before the successful introduction of microneedles into the market. As a result, carbohydrate-based microarrays have a high potential to achieve a future step in sensing, drug delivery, and biologics restitution. In this review, a comprehensive overview of carbohydrates such as hyaluronic acid, chitin, chitosan, chondroitin sulfate, cellulose and starch is discussed systematically. It also discusses the various drug delivery strategies and mechanical properties of biomaterial-based MNs, the progress made so far in the clinical translation of carbohydrate-based MNs, and the promotional opportunities for their commercialization. In conclusion, the article summarizes the future perspectives of carbohydrate-based MNs, which are considered as the new class of topical drug delivery systems.

Recent advances in porous microneedles: materials, fabrication, and transdermal applications

In the past two decades, microneedles (MNs), as a painless and simple drug delivery system, have received increasing attention for various biomedical applications such as transdermal drug delivery, interstitial fluid (ISF) extraction, and biosensing. Among the various types of MNs, porous MNs have been recently researched owing to their distinctive and unique characteristics, where porous structures inside MNs with continuous nano- or micro-sized pores can transport drugs or biofluids by capillary action. In addition, a wide range of materials, including non-polymers and polymers, were researched and used to form the porous structures of porous MNs. Adjustable porosity by different fabrication methods enables the achievement of sufficient mechanical strength by optimising fluid flows inside MNs. Moreover, biocompatible porous MNs integrated with biosensors can offer portable detection and rapid measurement of biomarkers in a minimally invasive manner. This review focuses on several aspects of current porous MN technology, including material selection, fabrication processes, biomedical applications, primarily covering transdermal drug delivery, ISF extraction, and biosensing, along with future prospects as well as challenges.

Optical Determination of Lithium Levels in Artificial Interstitial Fluid for Treatment Management of Bipolar Disorder

Bipolar Disorder (BD), characterized by mood fluctuating between episodes of mood elevation and depression, is a leading cause of disability worldwide. Lithium continues to be prescribed as a first-line mood stabilizer for the management of BD. However, lithium has a very narrow therapeutic index and it is crucial to carefully monitor lithium plasma levels as concentrations greater than 1.2 mmol/L are potentially toxic and can be fatal. The current techniques of lithium monitoring are cumbersome and require frequent blood tests with the consequent discomfort which results in patients evading treatment. Dermal interstitial fluid (ISF), an underutilized information-rich biofluid, can be a proxy for direct blood sampling and allow lithium drug monitoring as its lithium concentration is proportional to the concentrations in blood. Therefore, in this study we seek to investigate the measurement of lithium therapeutic concentrations in artificial ISF. Our study employs a colorimetric method, based on the reaction between chromogenic agent Quinizarin and Li⁺ ion which can be detected using optical spectroscopy in the visible region (400-800 nm), to determine lithium levels in artificial ISF. The resulting spectra of our experiments show spectral variations which are related to lithium concentrations in spiked samples of artificial ISF, with a correlation coefficient (R) of 0.9. Future work will focus on investigating the feasibility of utilizing ISF for real-time and minimally-invasive lithium drug monitoring.

Microneedles in Drug Delivery: Progress and Challenges

In recent years, an innovative transdermal delivery technology has attracted great interest for its ability to distribute therapeutics and cosmeceuticals for several applications, including vaccines, drugs, and biomolecules for skin-related problems. The advantages of microneedle patch technology have been extensively evaluated in the latest literature; hence, the academic publications in this area are rising exponentially. Like all new technologies, the microneedle patch application has great potential but is not without limitations. In this review, we will discuss the possible limitations by highlighting the areas where a great deal of improvements are required. Emphasising these concerns early on should help scientists and technologists to address the matters in a timely fashion and to use their resources wisely.

Hybrid Poly(AMPS-CS)-Au Microneedle Arrays to Enrich Metabolites from Skin for Early Disease Diagnosis

Recently, some metabolites in skin interstitial fluid (SIF) have become emerging re×sources for early disease diagnosis. However, their low level in SIF and difficulty to sampling are the biggest obstacle to further potential application. Here, a swellable microneedle array patch (MNAP) with high mechanical strength is presented, and the rapid enrichment of positively charged metabolites is achieved. The MNAP is fabricated by poly (chondroitin sulfate-acrylamido-2-methylpropane sulfonic acid)-gold nanoparticles (GNPs) composites via a micro-molding. The negatively charged copolymer hydrogel not only enrich positively charged metabolites, but also provide swellable capacity. The in situ synthesis of GNPs in the process of copolymerization make the GNPs cross-link to the hydrogel, which further enhance the MNAP mechanical strength and enrichment efficiency for positively charged metabolites. By using the MNAP, around 5 mg SIF in 10 min from the high fat/cholecalciferol/methimazole-induced atherogenesis rat is extracted and 23 metabolites including 13 quaternary ammonium cationic compounds can be detected and quantified by using a LC-QTOF-MS. Dysregulated L-carnitine and choline metabolism are discovered a week earlier in the SIF than in the serum, achieving early diagnosis of the metabolism syndrome disease. This MNAP also helps users complete home sampling for early disease diagnosis and monitoring.

Smart Responsive Microarray Patches for Transdermal Drug Delivery and Biological Monitoring

Traditional drug delivery routes possess various disadvantages which make them unsuitable for certain population groups, or indeed unsuitable for drugs with certain physicochemical properties. As a result, a variety of alternative drug delivery routes have been explored in recent decades, including transdermal drug delivery. One of the most promising novel transdermal drug delivery technologies is a microarray patch (MAP), which can bypass the outermost skin barrier and deliver drugs directly into the viable epidermis and dermis. Unlike traditional MAPs which release loaded cargo simultaneously upon insertion into the skin, stimuli responsive MAPs based on biological stimuli are able to precisely release the drug in response to the need for additional doses. Thus, smart MAPs that are only responsive to certain external stimuli are highly desirable, as they provide safer and more efficient drug delivery. In addition to drug delivery, they can also be used for biological monitoring, which further expands their applications.

Synthesis and characterization of sorbitol laced hydrogel-forming microneedles for therapeutic drug monitoring

The dermal interstitial fluid (ISF) is rich in biomarkers that are of great heuristic value for disease diagnosis and therapeutic drug monitoring. Nevertheless, the current strategies for sampling dermal ISF are both technical and invasive, limiting the potential utility of ISF for clinical medicine and research purposes. In the current work, we present, for the first time, the development, characterization, and evaluation of a novel sorbitol-laced hydrogel-forming microneedles (Sor-Hyd-MN) for sampling dermal ISF. The hydrogel system is fabricated from sorbitol and PEG 10,000 crosslinked with Gantrez® S-97 via esterification in a solvent-free manner. The sorbitol-laced hydrogel rapidly absorbs fluid when placed in aqueous media, reaching a total rise in the mass of 685% relative to the control hydrogel that only reached 436% within 15 mins. When formulated into MNs, the Sor-Hyd-MN exhibited significantly superior (p < 0.001) mechanical properties as evidenced by the minimal MN height reduction (0.9%) relative to the control-MN (3.9%) and Man-Hyd-MN (28.5%) when subjected to a compressive force of 32 N, an analog of patients' thumb pressure. The skin insertion capability of the Sor-Hyd-MN and the control-MN formulation was demonstrated using the in vitro skin simulant, Parafilm® M, and ex vivo neonatal porcine skin. When inserted into ex vivo neonatal porcine skin, the Sor-Hyd-MN showed rapid imbibement of dermal ISF within 15 mins, evidenced via the formation of swollen microchannels, which was 1.2-folds wider than the control formulation. In addition, we also demonstrated for the first time that incorporating sorbitol into Gantrez® S-97 hydrogel-forming MN improved the utility of this formulation in sampling dermal ISF. This was shown from the capability of the Sor-Hyd-MN in extracting the model compounds, isoniazid and theophylline, present within the ISF of ex vivo porcine skin. The Sor-Hyd-MN exhibited an extraction efficiency of 52.4% for isoniazid and 54.4% for theophylline which was significantly higher (p < 0.05) relative to the control formulation in a simple and straightforward manner. This work illustrates that incorporating a hyperosmolyte, such as sorbitol, can further enhance the potential utility of hydrogel-forming MN as a minimally-invasive tool for ISF sampling while providing a potential strategy to extract analytes with ease for subsequent sample analysis.

Microneedles for drug delivery: recent advances in materials and geometry for preclinical and clinical studies

INTRODUCTION

A microneedle array patch (MAP) has been studied as a means for delivering drugs or vaccines and has shown superior delivery efficiency compared to the conventional transdermal drug delivery system (TDD). This paper reviews recent advancements in the development of MAPs, with a focus on their size, shapes, and materials in preclinical and clinical studies for pharmaceutics.

AREA COVERED

We classified MAPs for drug delivery into four types: coated, dissolving, separable, and swellable. We covered their recent developments in materials and geometry in preclinical and clinical studies.

EXPERT OPINION

The design of MAPs needs to be determined based on what properties would be effective for the target diseases and purposes. In addition, in preclinical studies, it is necessary to consider not only the novelty of the formulations but also the feasibility of clinical application. Currently, clinical studies of microneedles loaded with various drugs and vaccines are in progress. When the regulation of pharmaceutical microneedles is established and more clinical studies are published, more drugs will be developed as microneedle products and clinical research will proceed. With these considerations, the microneedle array patch will be a better option for drug delivery.

Microneedle-based devices for point-of-care infectious disease diagnostics

Recent infectious disease outbreaks, such as COVID-19 and Ebola, have highlighted the need for rapid and accurate diagnosis to initiate treatment and curb transmission. Successful diagnostic strategies critically depend on the efficiency of biological sampling and timely analysis. However, current diagnostic techniques are invasive/intrusive and present a severe bottleneck by requiring specialist equipment and trained personnel. Moreover, centralised test facilities are poorly accessible and the requirement to travel may increase disease transmission. Self-administrable, point-of-care (PoC) microneedle diagnostic devices could provide a viable solution to these problems. These miniature needle arrays can detect biomarkers in/from the skin in a minimally invasive manner to provide (near-) real-time diagnosis. Few microneedle devices have been developed specifically for infectious disease diagnosis, though similar technologies are well established in other fields and generally adaptable for infectious disease diagnosis. These include microneedles for biofluid extraction, microneedle sensors and analyte-capturing microneedles, or combinations thereof. Analyte sampling/detection from both blood and dermal interstitial fluid is possible. These technologies are in their early stages of development for infectious disease diagnostics, and there is a vast scope for further development. In this review, we discuss the utility and future outlook of these microneedle technologies in infectious disease diagnosis.

The role of microneedle arrays in drug delivery and patient monitoring to prevent diabetes induced fibrosis

Diabetes affects approximately 450 million adults globally. If not effectively managed, chronic hyperglycaemia causes tissue damage that can develop into fibrosis. Fibrosis leads to end-organ complications, failure of organ systems occurs, which can ultimately cause death. One strategy to tackle end-organ complications is to maintain normoglycaemia. Conventionally, insulin is administered subcutaneously. Whilst effective, this delivery route shows several limitations, including pain. The transdermal route is a favourable alternative. Microneedle (MN) arrays are minimally invasive and painless devices that can enhance transdermal drug delivery. Convincing evidence is provided on MN-mediated insulin delivery. MN arrays can also be used as a diagnostic tool and monitor glucose levels. Furthermore, sophisticated MN array-based systems that integrate glucose monitoring and drug delivery into a single device have been designed. Therefore, MN technology has potential to revolutionise diabetes management. This review describes the current applications of MN technology for diabetes management and how these could prevent diabetes induced fibrosis.

Recent Advances in Microneedle Platforms for Transdermal Drug Delivery Technologies

In many clinical applications, the transdermal route is used as an alternative approach to avoid the significant limitations associated with oral drug delivery. There is a long history for drug delivery through the skin utilizing transdermal microneedle arrays. Microneedles are reported to be versatile and very efficient devices. This technique has spurred both industrial and scientific curiosity, due to its outstanding characteristics such as painless penetration, affordability, excellent medicinal efficiency, and relative protection. Microneedles possess outstanding properties for diverse biomedical uses such as the delivery of very large substances with ionic and hydrophilic physicochemical properties. Importantly, microneedles are applicable in numerous biomedical fields such as therapy, diagnosis, and vaccine administration. Microneedles are emerging tools that have shown profound potential for biomedical applications. Transdermal microneedle technologies are likely to become a preferred route of therapeutic substances administration in the future since they are effective, painless, and affordable. In this review, we summarize recent advances in microneedles for therapeutic applications. We explore their constituent materials and fabrication methods that improve the delivery of critical therapeutic substances through the skin. We further discuss the practicality of advanced microneedles used as drug delivery tools.

Finger-Actuated Microneedle Array for Sampling Body Fluids

The application of microneedles (MNs) for minimally invasive biological fluid sampling is rapidly emerging, offering a user-friendly approach with decreased insertion pain and less harm to the tissues compared to conventional needles. Here, a finger-powered microneedle array (MNA) integrated with a microfluidic chip was conceptualized to extract body fluid samples. Actuated by finger pressure, the microfluidic device enables an efficient approach for the user to collect their own body fluids in a simple and fast manner without the requirement for a healthcare worker. The processes for extracting human blood and interstitial fluid (ISF) from the body and the flow across the device, estimating the amount of the extracted fluid, were simulated. The design in this work can be utilized for the minimally invasive personalized medical equipment offering a simple usage procedure.

Microneedle Arrays for Sampling and Sensing Skin Interstitial Fluid

Dermal interstitial fluid (ISF) is a novel source of biomarkers that can be considered as an alternative to blood sampling for disease diagnosis and treatment. Nevertheless, in vivo extraction and analysis of ISF are challenging. On the other hand, microneedle (MN) technology can address most of the challenges associated with dermal ISF extraction and is well suited for long-term, continuous ISF monitoring as well as in situ detection. In this review, we first briefly summarise the different dermal ISF collection methods and compare them with MN methods. Next, we elaborate on the design considerations and biocompatibility of MNs. Subsequently, the fabrication technologies of various MNs used for dermal ISF extraction, including solid MNs, hollow MNs, porous MNs, and hydrogel MNs, are thoroughly explained. In addition, different sensing mechanisms of ISF detection are discussed in detail. Subsequently, we identify the challenges and propose the possible solutions associated with ISF extraction. A detailed investigation is provided for the transport and sampling mechanism of ISF in vivo. Also, the current in vitro skin model integrated with the MN arrays is discussed. Finally, future directions to develop a point-of-care (POC) device to sample ISF are proposed.

Enhancement strategies for transdermal drug delivery systems: current trends and applications

Transdermal drug delivery systems have become an intriguing research topic in pharmaceutical technology area and one of the most frequently developed pharmaceutical products in global market. The use of these systems can overcome associated drawbacks of other delivery routes, such as oral and parenteral. The authors will review current trends, and future applications of transdermal technologies, with specific focus on providing a comprehensive understanding of transdermal drug delivery systems and enhancement strategies. This article will initially discuss each transdermal enhancement method used in the development of first-generation transdermal products. These methods include drug/vehicle interactions, vesicles and particles, stratum corneum modification, energy-driven methods and stratum corneum bypassing techniques. Through suitable design and implementation of active stratum corneum bypassing methods, notably microneedle technology, transdermal delivery systems have been shown to deliver both low and high molecular weight drugs. Microneedle technology platforms have proven themselves to be more versatile than other transdermal systems with opportunities for intradermal delivery of drugs/biotherapeutics and therapeutic drug monitoring. These have shown that microneedles have been a prospective strategy for improving transdermal delivery systems.

Microneedle Arrays Combined with Nanomedicine Approaches for Transdermal Delivery of Therapeutics

Organic and inorganic nanoparticles (NPs) have shown promising outcomes in transdermal drug delivery. NPs can not only enhance the skin penetration of small/biomacromolecule therapeutic agents but can also impart control over drug release or target impaired tissue. Thanks to their unique optical, photothermal, and superparamagnetic features, NPs have been also utilized for the treatment of skin disorders, imaging, and biosensing applications. Despite the widespread transdermal applications of NPs, their delivery across the stratum corneum, which is the main skin barrier, has remained challenging. Microneedle array (MN) technology has recently revealed promising outcomes in the delivery of various formulations, especially NPs to deliver both hydrophilic and hydrophobic therapeutic agents. The present work reviews the advancements in the application of MNs and NPs for an effective transdermal delivery of a wide range of therapeutics in cancer chemotherapy and immunotherapy, photothermal and photodynamic therapy, peptide/protein vaccination, and the gene therapy of various diseases. In addition, this paper provides an overall insight on MNs' challenges and summarizes the recent achievements in clinical trials with future outlooks on the transdermal delivery of a wide range of nanomedicines.