Dynamics of triacylglycerol and EPA production in Phaeodactylum tricornutum under nitrogen starvation at different light intensities

Microalgae as tools for bio-circular-green economy: Zero-waste approaches for sustainable production and biorefineries of microalgal biomass

Microalgae are promising organisms that are rapidly gaining much attention due to their numerous advantages and applications, especially in biorefineries for various bioenergy and biochemicals. This review focuses on the microalgae contributions to Bio-Circular-Green (BCG) economy, in which zero-waste approaches for sustainable production and biorefineries of microalgal biomass are introduced and their possible integration is discussed. Firstly, overviews of wastewater upcycling and greenhouse gas capture by microalgae are given. Then, a variety of valuable products from microalgal biomass, e.g., pigments, vitamins, proteins/peptides, carbohydrates, lipids, polyunsaturated fatty acids, and exopolysaccharides, are summarized to emphasize their biorefinery potential. Techno-economic and environmental analyses have been used to evaluate sustainability of microalgal biomass production systems. Finally, key issues, future perspectives, and challenges for zero-waste microalgal biorefineries, e.g., cost-effective techniques and innovative integrations with other viable processes, are discussed. These strategies not only make microalgae-based industries commercially feasible and sustainable but also reduce environmental impacts.

Comparison of two Phaeodactylum tricornutum ecotypes under nitrogen starvation and resupply reveals distinct lipid accumulation strategies but a common degradation process

Introduction

Phaeodactylum tricornutum is a model species frequently used to study lipid metabolism in diatoms. When exposed to a nutrient limitation or starvation, diatoms are known to accumulate neutral lipids in cytoplasmic lipid droplets (LDs). Those lipids are produced partly de novo and partly from the recycle of plastid membrane lipids. Under a nitrogen resupply, the accumulated lipids are catabolized, a phenomenon about which only a few data are available. Various strains of P. tricornutum have been isolated around the world that may differ in lipid accumulation patterns.

Methods

To get further information on this topic, two genetically distant ecotypes of P. tricornutum (Pt1 and Pt4) have been cultivated under nitrogen deprivation during 11 days followed by a resupply period of 3 days. The importance of cytoplasmic LDs relative to the plastid was assessed by a combination of confocal laser scanning microscopy and cell volume estimation using bright field microscopy pictures.

Results and discussion

We observed that in addition to a basal population of small LDs (0.005 μm3 to 0.7 μm3) present in both strains all along the experiment, Pt4 cells immediately produced two large LDs (up to 12 μm3 after 11 days) while Pt1 cells progressively produced a higher number of smaller LDs (up to 7 μm3 after 11 days). In this work we showed that, in addition to intracellular available space, lipid accumulation may be limited by the pre-starvation size of the plastid as a source of membrane lipids to be recycled. After resupplying nitrogen and for both ecotypes, a fragmentation of the largest LDs was observed as well as a possible migration of LDs to the vacuoles that would suggest an autophagic degradation. Altogether, our results deepen the understanding of LDs dynamics and open research avenues for a better knowledge of lipid degradation in diatoms.

Persistence of algal toxicity induced by polystyrene nanoplastics at environmentally relevant concentrations

Polystyrene (PS) often found in the ocean is one of the most commonly used plastic polymers in the world and can exist in different particle sizes. In particular, PS degrades relatively faster and widely accumulates at the nanoscale. Therefore, the penetration is strong and it is easy to enter the body and cause adverse effects. However, the persistence or recovery of their toxicity remains largely unclear. Here, we designed two subexperiments (exposure and recovery experiments) and investigated the persistence of the toxicity of polystyrene (PS) NPs at a wide concentration range (0.01-10 mg/L) to diatoms (Phaeodactylum tricornutum). PS-NPs significantly inhibited algal growth and clearly wrinkled the surfaces of cells, membrane permeability was significantly increased, and the steady-state state of cell redox and mitochondrial membrane potential was disturbed. However, in the recovery experiment, the increased membrane permeability was observed to persist, but the induced oxidative damage was reversible, and the absorbed NPs could be excreted. Integrated omics techniques (metabolomics and transcriptomics) revealed that PS-NPs significantly disrupts cell metabolism, including disturbances in fatty acid biosynthesis and enhanced biosynthesis of phenylalanine, tyrosine, and tryptophan. Inhibition of fatty acid, amino acid, energy and carbohydrate metabolism and disturbance of the antioxidant system contribute to the persistence of toxicity. These findings highlight the phenomena and mechanisms of the persistence of phytotoxicity and are critical to the accurate assessment of NPs.

A scalable model for EPA and fatty acid production by Phaeodactylum tricornutum

Large-scale photoautotrophic production of microalgae has the potential to provide a sustainable supply of omega-3 fatty acids (eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA)) for human and animal nutrition. This study presents a kinetic model for the EPA-producing microalga Phaeodactylum tricornutum in photoautotrophic conditions, with light and nitrogen being the growth limiting factors. The model was developed using a dataset obtained from bench-scale (5 L) cultures and was successfully validated against pilot-scale (50 L) cultures. This model is the first to predict the biomass and total fatty acid accumulation along with the EPA concentrations in the biomass and total fatty acid fraction for microalgae. The model was used to develop an optimized repeated-batch strategy; implementation of this led to increases in the biomass and EPA productivities of 50 and 20% respectively. This clearly indicates the potential of the model to be used as a tool in the design, optimization and scale-up of microalgal systems for EPA production.

Light induces peridinin and docosahexaenoic acid accumulation in the dinoflagellate Durusdinium glynnii

Peridinin is a light-harvesting carotenoid present in phototrophic dinoflagellates and has great potential for new drug applications and cosmetics development. Herein, the effects of irradiance mediated by light-emitting diodes on growth performance, carotenoid and fatty acid profiles, and antioxidant activity of the endosymbiotic dinoflagellate Durusdinium glynnii were investigated. The results demonstrate that D. glynnii is particularly well adapted to low-light conditions; however, it can be high-light-tolerant. In contrast to other light-harvesting carotenoids, the peridinin accumulation in D. glynnii occurred during high-light exposure. The peridinin to chlorophyll-a ratio varied as a function of irradiance, while the peridinin to total carotenoids ratio remained stable. Under optimal irradiance for growth, there was a peak in docosahexaenoic acid (DHA) bioaccumulation. This study contributes to the understanding of the photoprotective role of peridinin in endosymbiont dinoflagellates and highlights the antioxidant activity of peridinin-rich extracts. KEY POINTS: • Peridinin has a protective role against chlorophyll photo-oxidation • High light conditions induce cellular peridinin accumulation • D. glynnii accumulates high amounts of DHA under optimal light supply.

Comparative Proteomics Reveals Evidence of Enhanced EPA Trafficking in a Mutant Strain of Nannochloropsis oculata

The marine microalga Nannochloropsis oculata is a bioproducer of eicosapentaenoic acid (EPA), a fatty acid. EPA is incorporated into monogalactosyldiacylglycerol within N. oculata thylakoid membranes, and there is a biotechnological need to remodel EPA synthesis to maximize production and simplify downstream processing. In this study, random mutagenesis and chemical inhibitor-based selection method were devised to increase EPA production and accessibility for improved extraction. Ethyl methanesulfonate was used as the mutagen with selective pressure achieved by using two enzyme inhibitors of lipid metabolism: cerulenin and galvestine-1. Fatty acid methyl ester analysis of a selected fast-growing mutant strain had a higher percentage of EPA (37.5% of total fatty acids) than the wild-type strain (22.2% total fatty acids), with the highest EPA quantity recorded at 68.5 mg/g dry cell weight, while wild-type cells had 48.6 mg/g dry cell weight. Label-free quantitative proteomics for differential protein expression analysis revealed that the wild-type and mutant strains might have alternative channeling pathways for EPA synthesis. The mutant strain showed potentially improved photosynthetic efficiency, thus synthesizing a higher quantity of membrane lipids and EPA. The EPA synthesis pathways could also have deviated in the mutant, where fatty acid desaturase type 2 (13.7-fold upregulated) and lipid droplet surface protein (LDSP) (34.8-fold upregulated) were expressed significantly higher than in the wild-type strain. This study increases the understanding of EPA trafficking in N. oculata, leading to further strategies that can be implemented to enhance EPA synthesis in marine microalgae.

Production, Processing, and Protection of Microalgal n-3 PUFA-Rich Oil

Microalgae have been increasingly considered as a sustainable “biofactory” with huge potentials to fill up the current and future shortages of food and nutrition. They have become an economically and technologically viable solution to produce a great diversity of high-value bioactive compounds, including n-3 polyunsaturated fatty acids (PUFA). The n-3 PUFA, especially eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), possess an array of biological activities and positively affect a number of diseases, including cardiovascular and neurodegenerative disorders. As such, the global market of n-3 PUFA has been increasing at a fast pace in the past two decades. Nowadays, the supply of n-3 PUFA is facing serious challenges as a result of global warming and maximal/over marine fisheries catches. Although increasing rapidly in recent years, aquaculture as an alternative source of n-3 PUFA appears insufficient to meet the fast increase in consumption and market demand. Therefore, the cultivation of microalgae stands out as a potential solution to meet the shortages of the n-3 PUFA market and provides unique fatty acids for the special groups of the population. This review focuses on the biosynthesis pathways and recombinant engineering approaches that can be used to enhance the production of n-3 PUFA, the impact of environmental conditions in heterotrophic cultivation on n-3 PUFA production, and the technologies that have been applied in the food industry to extract and purify oil in microalgae and protect n-3 PUFA from oxidation.

Bright as day and dark as night: light-dependant energy for lipid biosynthesis and production in microalgae

Microalgae are photosynthetic organisms functioning as the green bio-factories for various pharmaceutical and biofuel products. To date, numerous attempts have been carried out to manipulate culture conditions to maximize the production of the desired metabolites. Because light is the energy source of microalgae for their growth and metabolites biosynthesis, it has been one of the most investigated variables emphasized on the deep understanding of how microalgae respond towards light changes as an external stimulus. This review discusses the effects of different light sources, light intensities, light wavelengths and length of photoperiod on various microalgae species, especially in terms of biomass and lipid productivity. Additionally, the relationship between photoregulation processes and lipid productivity of microalgae are also deliberated. The current available approaches of microalgae mass cultivation, including different types of open and closed systems are recapitulated with the intention to highlight the significant insights for the design of future photoreactors.

Sustainable production of EPA-rich oil from microalgae: Towards an algal biorefinery

Utilization of sustainable natural resources such as microalgae has been considered for the production of biofuels, aquaculture feed, high-value bioactives such as omega-3 fatty acids, carotenoids, etc. Eicosapentaenoic acid (EPA) is an omega-3 fatty acid present in fish oil, which is of physiological importance to both humans and fishes. Marine microalgae are sustainable sources of lipid rich in EPA and different species have been explored for the production of EPA as a single product. There has been a rising interest in the concept of a multi-product biorefinery, focusing on maximum valorization of the algal biomass. Targeting one or more value-added compounds in a biorefinery scenario can improve the commercial viability of low-value products like triglycerides for biofuel. This approach has been viewed by technologists and experts as a sustainable and economically feasible possibility for the large-scale production of microalgae for its potential applications in biodiesel and jet fuel production, nutraceuticals, animal and aquaculture feeds, etc. In this review paper, we describe the recent developments in the production of high-value EPA-rich oil from microalgae, emphasizing on the upstream and downstream bioprocess techniques, and the advantages of considering an EPA-rich oil based biorefinery.

Co-cultivation of Phaeodactylum tricornutum and Aurantiochytrium limacinum for polyunsaturated omega-3 fatty acids production

Marine protist Aurantiochytrium limacinum produces docosahexaenoic acid (DHA) as main polyunsaturated fatty acid (PUFA) and lacks any monounsaturated fatty acids (MUFA), while eicosapentaenoic acid (EPA) and MUFA's are produced by Phaeodactylum tricornutum. The marine diatom P. tricornutum was co-cultured with A.limacinum to match the EPA:DHA ratio of fish oil. Modulation in initial cell density ratio overcame the dominance of A.limacinum during co-cultivation and led to regulated proliferation of both species. Media engineering with nitrate and glycerol concentration yielded 2:1 (56.44: 30.11) mg g^-1 and 1:1 (47.43: 49.61) mg g^-1 EPA: DHA ratio. The oil and biomass obtained from co-cultivation comprised of MUFA's such as palmitoleic acid (2.65 mg g^-1) and oleic acid (1.25 mg g^-1) along with pigments like fucoxanthin (367.18 µg g^-1), β-carotene (8.98 µg g^-1) and astaxanthin (0.77 µg g^-1). Thus, co-cultivation of P. tricornutum with A. limacinum represented a unique strategy towards achieving desired fatty acid composition.

Microalgae Xanthophylls: From Biosynthesis Pathway and Production Techniques to Encapsulation Development

In the last 20 years, xanthophylls from microalgae have gained increased scientific and industrial interests. This review highlights the essential issues that concern this class of high value compounds. Firstly, their chemical diversity as the producer microorganisms was detailed. Then, the use of conventional and innovative extraction techniques was discussed. Upgraded knowledge on the biosynthetic pathway of the main xanthophylls produced by photosynthetic microorganisms was reviewed in depth, providing new insightful ideas, clarifying the function of these active biomolecules. In addition, the recent advances in encapsulation techniques of astaxanthin and fucoxanthin, such as spray and freeze drying, gelation, emulsification and coacervation were updated. Providing information about these topics and their applications and advances could be a help to students and young researchers who are interested in chemical and metabolic engineering, chemistry and natural products communities to approach the complex thematic of xanthophylls.

Influence of Light Conditions on Microalgae Growth and Content of Lipids, Carotenoids, and Fatty Acid Composition

Microalgae are a valuable natural resource for a variety of value-added products. The growth of microalgae is determined by the impact of many factors, but, from the point of view of the implementation of autotrophic growth, light is of primary importance. This work presents an overview of the influence of light conditions on the growth of microalgae, the content of lipids, carotenoids, and the composition of fatty acids in their biomass, taking into account parameters such as the intensity, duration of lighting, and use of rays of different spectral composition. The optimal light intensity for the growth of microalgae lies in the following range: 26-400 µmol photons m-2 s-1. An increase in light intensity leads to an activation of lipid synthesis. For maximum lipid productivity, various microalgae species and strains need lighting of different intensities: from 60 to 700 µmol photons m-2 s-1. Strong light preferentially increases the triacylglyceride content. The intensity of lighting has a regulating effect on the synthesis of fatty acids, carotenoids, including β-carotene, lutein and astaxanthin. In intense lighting conditions, saturated fatty acids usually accumulate, as well as monounsaturated ones, and the number of polyunsaturated fatty acids decreases. Red as well as blue LED lighting improves the biomass productivity of microalgae of various taxonomic groups. Changing the duration of the photoperiod, the use of pulsed light can stimulate microalgae growth, the production of lipids, and carotenoids. The simultaneous use of light and other stresses contributes to a stronger effect on the productivity of algae.

A Novel Three-Step Extraction Strategy for High-Value Products from Red Algae Porphyridium purpureum

The microalga Porphyridium accumulates high-value compounds such as phycoerythrin, polyunsaturated fatty acids, and polysaccharides, and thus, the extraction of these compounds could significantly expand the value of Porphyridium biomass. In the present study, a novel fractional extraction strategy based on the characteristics of these compounds was established using cold water, 95% ethanol, and hot water. The yield of phycoerythrin, lipids, and polysaccharides was 63.3, 74.3, and 75.2%, respectively. The phycoerythrin exhibited excellent fluorescence characteristics but had low purity. The crude lipid was dark with poor fluidity. Digalactosyldiacylglycerol and sulphoquinovosyldiacylglycerol containing C20:5 and C20:4 were the most abundant glycerolipids, while glucose, xylose, and galactose constituted the intracellular polysaccharides that had covalently bound to proteins (8.01%), uronic acid (4.13%), and sulfate (8.31%). Compared with polysaccharides and crude lipids, crude phycoerythrin showed the best antioxidant activity. Overall, the three-step fractional extraction process was feasible for Porphyridium; however, further purification is necessary for downstream applications.

Fucoxanthin and docosahexaenoic acid production by cold-adapted Tisochrysis lutea

Tisochrysis lutea is an important microalgal species for fucoxanthin and docosahexaenoic acid (DHA) production with an optimum cultivation temperature of approximately 30 °C. The aim of the present work was to develop a winter strain with high productivity at 15 °C. The response of the original strain to a decrease in temperature from 30 °C to 15 °C was investigated in continuous turbidostat experiments. This was followed by adaptation for >180 days at 15 °C and 2 rounds of sorting for cells with high chlorophyll fluorescence (top 5%) using fluorescence-activated cell sorting (FACS). For the original strain the productivity of biomass, fucoxanthin, and DHA decreased by 92 %, 98 % and 85 % respectively when decreasing the temperature from 30 °C to 15 °C. In the sorted cold-adapted 'winter strain', biomass, fucoxanthin, and DHA productivities were similar to those at 30 °C. In addition, the fucoxanthin concentration increased from 1.11 to 4.24 mg g^-1 dry weight and the polar lipid fraction in total fatty acids increased from 21 % to 55 %. The winter strain showed a robust and stable phenotype after one year of cultivation, expanding the outdoor fucoxanthin and lipid production seasons for this species.

Data-Independent-Acquisition-Based Proteomic Approach towards Understanding the Acclimation Strategy of Oleaginous Microalga Microchloropsis gaditana CCMP526 in Hypersaline Conditions

Salinity is one of the significant factors that affect growth and cellular metabolism, including photosynthesis and lipid accumulation, in microalgae and higher plants. Microchloropsis gaditana CCMP526 can acclimatize to different salinity levels by accumulating compatible solutes, carbohydrates, and lipids as energy storage molecules. We used proteomics to understand the molecular basis for acclimation of M. gaditana to increased salinity levels [55 and 100 PSU (practical salinity unit)]. Correspondence analysis was used for the identification of salinity-responsive proteins (SRPs). The highest number of salinity-induced proteins was observed in 100 PSU. Gene ontology enrichment analysis revealed a separate path of acclimation for cells exposed to 55 and 100 PSU. Osmolyte and lipid biosynthesis were upregulated in hypersaline conditions. Concomitantly, lipid oxidation pathways were also upregulated in hypersaline conditions, providing acetyl-CoA for energy metabolism through the tricarboxylic acid cycle. Carbon fixation and photosynthesis were tightly regulated, while chlorophyll biosynthesis was affected in hypersaline conditions. Importantly, temporal proteome analysis of salinity-induced M. gaditana revealed vital SRPs which could be used for engineering salinity resilient microalgal strains for improved productivity in hypersaline culture conditions.

Impact of organic carbon acquisition on growth and functional biomolecule production in diatoms

Diatoms are unicellular photosynthetic protists which constitute one of the most successful microalgae contributing enormously to global primary productivity and nutrient cycles in marine and freshwater habitats. Though they possess the ability to biosynthesize high value compounds like eicosatetraenoic acid (EPA), fucoxanthin (Fx) and chrysolaminarin (Chrl) the major bottle neck in commercialization is their inability to attain high density growth. However, their unique potential of acquiring diverse carbon sources via varied mechanisms enables them to adapt and grow under phototrophic, mixotrophic as well as heterotrophic modes. Growth on organic carbon substrates promotes higher biomass, lipid, and carbohydrate productivity, which further triggers the yield of various biomolecules. Since, the current mass culture practices primarily employ open pond and tubular photobioreactors for phototrophic growth, they become cost intensive and economically non-viable. Therefore, in this review we attempt to explore and compare the mechanisms involved in organic carbon acquisition in diatoms and its implications on mixotrophic and heterotrophic growth and biomolecule production and validate how these strategies could pave a way for future exploration and establishment of sustainable diatom biorefineries for novel biomolecules.

High Resolution Proteome of Lipid Droplets Isolated from the Pennate Diatom Phaeodactylum tricornutum (Bacillariophyceae) Strain pt4 provides mechanistic insights into complex intracellular coordination during nitrogen deprivation

Lipid droplets (LDs) are an organelle conserved amongst all eukaryotes, consisting of a neutral lipid core surrounded by a polar lipid monolayer. Many species of microalgae accumulate LDs in response to stress conditions, such as nitrogen starvation. Here, we report the isolation and proteomic profiling of LD proteins from the model oleaginous pennate diatom Phaeodactylum tricornutum, strain Pt4 (UTEX 646). We also provide a quantitative description of LD morphological ontogeny, and fatty acid content. Novel cell disruption and LD isolation methods, combined with suspension-trapping and nanoflow liquid chromatography coupled to high resolution mass spectrometry, yielded an unprecedented number of LD proteins. Predictive annotation of the LD proteome suggests a broad assemblage of proteins with diverse functions, including lipid metabolism and vesicle trafficking, as well as ribosomal and proteasomal machinery. These proteins provide mechanistic insights into LD processes, and evidence for interactions between LDs and other organelles. We identify for the first time several key steps in diatom LD-associated triacylglycerol biosynthesis. Bioinformatic analyses of the LD proteome suggests multiple protein targeting mechanisms, including amphipathic helices, post-translational modifications, and translocation machinery. This work corroborates recent findings from other strains of P. tricornutum, other diatoms, and other eukaryotic organisms, suggesting that the fundamental proteins orchestrating LDs are conserved, and represent an ancient component of the eukaryotic endomembrane system. We postulate a comprehensive model of nitrogen starvation-induced diatom LDs on a molecular scale, and provide a wealth of candidates for metabolic engineering, with the potential to eventually customize LD contents.

Response of Scenedesmus sp. to microwave treatment: Enhancement of lipid, exopolysaccharide and biomass production

The present study focuses on the use of microwave irradiation to improve the production of lipid, exopolysaccharide and biomass in the microalgae Scenedesmus sp. Microwave treatment conditions such as microwave power, duty cycle % and time was optimized to increase the biomass and lipid content of Scenedesmus sp. Microwave power 100 W, duty cycle 40 %, and 2 min treatment time led to a substantial improvement in the biomass and lipid content. Due to the simultaneous improvement in both the biomass and lipid content, the total lipid production was improved from 0.76 (microwave untreated) to 1.42 g/L (microwave treated) (12 days grown cells). In addition, with biomass and lipid content, microwave treatment also enhanced the production of Exopolysaccharides (EPS) up to 2.3-folds. Furthermore, biodiesel properties were improved to some extent after the microwave treatment. Microwave irradiation is a promising physical treatment method for microalgae to improve total lipid production.

Diatoms for Carbon Sequestration and Bio-Based Manufacturing

Carbon dioxide (CO2) is a major greenhouse gas responsible for climate change. Diatoms, a natural sink of atmospheric CO2, can be cultivated industrially in autotrophic and mixotrophic modes for the purpose of CO2 sequestration. In addition, the metabolic diversity exhibited by this group of photosynthetic organisms provides avenues to redirect the captured carbon into products of value. These include lipids, omega-3 fatty acids, pigments, antioxidants, exopolysaccharides, sulphated polysaccharides, and other valuable metabolites that can be produced in environmentally sustainable bio-manufacturing processes. To realize the potential of diatoms, expansion of our knowledge of carbon supply, CO2 uptake and fixation by these organisms, in conjunction with ways to enhance metabolic routing of the fixed carbon to products of value is required. In this review, current knowledge is explored, with an evaluation of the potential of diatoms for carbon capture and bio-based manufacturing.

Stresses as First-Line Tools for Enhancing Lipid and Carotenoid Production in Microalgae

Microalgae can produce high-value-added products such as lipids and carotenoids using light or sugars, and their biosynthesis mechanism can be triggered by various stress conditions. Under nutrient deprivation or environmental stresses, microalgal cells accumulate lipids as an energy-rich carbon storage battery and generate additional amounts of carotenoids to alleviate the oxidative damage induced by stress conditions. Though stressful conditions are unfavorable for biomass accumulation and can induce oxidative damage, stress-based strategies are widely used in this field due to their effectiveness and economy. For the overproduction of different target products, it is required and meaningful to deeply understand the effects and mechanisms of various stress conditions so as to provide guidance on choosing the appropriate stress conditions. Moreover, the underlying molecular mechanisms under stress conditions can be clarified by omics technologies, which exhibit enormous potential in guiding rational genetic engineering for improving lipid and carotenoid biosynthesis.

Phaeodactylum tricornutum: A Diatom Cell Factory

A switch from a petroleum-based to a biobased economy requires the capacity to produce both high-value low-volume and low-value high-volume products. Recent evidence supports the development of microalgae-based microbial cell factories with the objective of establishing environmentally sustainable manufacturing solutions. Diatoms display rich diversity and potential in this regard. We focus on Phaeodactylum tricornutum, a pennate diatom that is commonly found in marine ecosystems, and discuss recent trends in developing the diatom chassis for the production of a suite of natural and genetically engineered products. Both upstream and downstream developments are reviewed for the commercial development of P. tricornutum as a cell factory for a spectrum of marketable products.

Use of waste carbon dioxide and pre-treated liquid digestate from biogas process for Phaeodactylum tricornutum cultivation in photobioreactors and open ponds

Phaeodactylum tricornutum is considered a promising source of polyunsaturated fatty acids (PUFAs), in particular eicosapentaenoic acid (EPA). In this study, P. tricornutum cultivation using waste products from anaerobic digestion (i.e. liquid digestate and CO₂) was tested and scaled-up in closed and open prototype systems. The chemical composition of algal biomass was evaluated to optimize the lipid content. Algal productivity and composition, especially in terms of PUFAs, were not modified by the use of waste CO₂. Digestate led to a lower protein (24%) content than medium (36-37%), without affecting lipid amount (about 37%). Algal and EPA productivity were nearly two-fold higher by using photobioreactors (0.075 g biomass L^-1 day^-1 and 1.62 mg EPA g^-1 day^-1) than open ponds, which are more influenced by environmental conditions. This study highlights that economic and environmental benefits could be achieved by using waste CO₂ and liquid digestate from anaerobic digestion for microalgae cultivation.

Lipid Production in Nannochloropsis gaditana during Nitrogen Starvation

The microalga Nannochloropsis gaditana is a natural producer of triacylglycerol (TAG) and the omega-3 fatty acid eicosapentaenoic acid (EPA). TAG accumulation is induced by nitrogen starvation. The biomass-specific photon supply rate used had an effect on EPA and TAG accumulation during nitrogen starvation as well as on the localization of EPA accumulation. Clear differences in TAG yield on light were found for different biomass-specific photon supply rates and light regimes during nitrogen starvation. De novo EPA synthesis or the translocation of EPA between lipid fractions might be limiting for EPA accumulation in TAG. Further studies are needed to fully understand EPA accumulation in TAG during nitrogen starvation. To elucidate the function of EPA in TAG nitrogen recovery, experiments are suggested. The overexpression of genes involved in de novo EPA synthesis and translocation is proposed to elucidate the exact metabolic routes involved in these processes during nitrogen starvation. This work addresses future opportunities to increase EPA accumulation.

An Extended Approach to Quantify Triacylglycerol in Microalgae by Characteristic Fatty Acids

Microalgae represent a third generation biofuel feedstock due to their high triacylglycerol (TAG) content under adverse environmental conditions. Microalgal TAG resides in a single cell and serves as a lipid class mixed with complicated compositions. We previously showed that TAG possessed characteristic fatty acids (CFAs) for quantification and was linearly correlated with the relative abundance of CFA within certain limits in microalgae. Here, we defined the application range of the linear correlation between TAG and CFA in the oleaginous microalgae Chlamydomonas reinhardtii and Phaeodactylum tricornutum. In addition, TAG quantification was further expanded to a wide range of levels and the absolute amounts of saturated or monounsaturated CFAs, 16:0 and 18:1n9 of C. reinhardtii and 16:0 and 16:1n7 of P. tricornutum, instead of polyunsaturated CFAs, were verified to be linearly correlated to TAG levels throughout the entire period of nitrogen stress. This approach utilizes a single fatty acid to quantify TAG mixtures, and is rapid, simple and precise, which provides a useful tool for monitoring TAG accumulation of distinct microalgal species and facilitating high-throughput mutant screening for microalgae.

Manipulating environmental stresses and stress tolerance of microalgae for enhanced production of lipids and value-added products-A review

Microalgae have promising potential to produce lipids and a variety of high-value chemicals. Suitable stress conditions such as nitrogen starvation and high salinity could stimulate synthesis and accumulation of lipids and high-value products by microalgae, therefore, various stress-modification strategies were developed to manipulate and optimize cultivation processes to enhance bioproduction efficiency. On the other hand, advancements in omics-based technologies have boosted the research to globally understand microalgal gene regulation under stress conditions, which enable further improvement of production efficiency via genetic engineering. Moreover, integration of multi-omics data, synthetic biology design, and genetic engineering manipulations exhibits a tremendous potential in the betterment of microalgal biorefinery. This review discusses the process manipulation strategies and omics studies on understanding the regulation of metabolite biosynthesis under various stressful conditions, and proposes genetic engineering of microalgae to improve bioproduction via manipulating stress tolerance.

Continuous versus batch production of lipids in the microalgae Acutodesmus obliquus

This work provides a novel quantitative comparison of batch versus continuous microalgal lipid production in the wild type and starchless mutant strain of Acutodesmus obliquus. Both strains showed higher TAG yields on light under batch operation compared to continuous nitrogen limitation. The starchless mutant showed 0.20gTAGmol_ph^-1 for batch and 0.12gTAGmol_ph^-1 for continuous operation, while the wildtype only showed 0.16gTAGmol_ph^-1 for batch and 0.08gTAGmol_ph^-1 for continuous operation. Also, higher TAG contents were found under batch starvation (26% of dry weight for the wildtype and 43% of dry weight for starchless mutant) compared to continuous cultivations (16% of dry weight for the wildtype and 33% of dry weight for starchless mutant). Starch acts as the favoured storage metabolite during nitrogen limitation in A. obliquus, whereas TAG is only accumulated after starch reaches a cellular maximum of 40% of dry weight.