Morphological analysis of the alveolar bone of the anterior teeth in severe high-angle skeletal Class II and Class III malocclusions assessed with cone-beam computed tomography

CBCT Evaluation of Alveolar Bone Change and Root Resorption after Orthodontic Treatment: A Retrospective Study

BACKGROUND

For years, there has been a long debate about the impact of orthodontic treatment on the periodontium of patients. Therefore, it is important to understand the effects of orthodontic forces on the periodontium. The objective of this study was to evaluate the height of the alveolar bone at the four surfaces of specific teeth and the root length of the central incisors before and after orthodontic treatment.

MATERIALS AND METHODS

CBCTs from a group of fifty patients were evaluated before (T0) and after orthodontic treatment (T1). Evaluations of the alveolar bone were performed by measuring the distance from the most apical point of the marginal portion to the CEJ at the buccal (B-ABL), lingual (L-ABL), mesial (M-ABL), and distal (D-ABL) surfaces of the central incisor (CI), first premolar (1st PM), and first molar (1st M). Meanwhile, root resorptions were evaluated by measuring the distance from the center of the tooth at the CEJ to the most apical point of the central incisor.

RESULTS

The reduction in the alveolar bone level was highest at the buccal segment (75%) and lowest at the distal (42%) segment, although the decrease was not statistically significant. Root resorption, in terms of reduction in the total length, was detected in the upper central incisor.

CONCLUSIONS

Fixed orthodontic treatment can produce a significant reduction in root length, but not at the level of the alveolar bone.

Genetic Insights into Skeletal Malocclusion: The Role of the FBN3 rs7351083 SNP in the Romanian Population

Background and Objectives: irregularities in the growth and development of the jawbones can lead to misalignments of maxillary and mandibular structures, a complex condition known as skeletal malocclusion, one of the most common oral health problems. Skeletal malocclusions, particularly Class II and Class III, can significantly affect facial appearance, chewing efficiency, speech, and overall oral health, often requiring orthodontic treatment or surgery to correct. These dentofacial anomalies are influenced by genetic and environmental factors and exhibit diverse phenotypic expressions. Materials and Methods: in this study, we investigated the correlation between the rs7351083 SNP of the FBN3 gene that encodes a member of the fibrillin protein family and malocclusion risk in a group of 57 patients from Romania. Results: the results shed light on the relationship between the selected genetic marker and the investigated dentofacial disorder, revealing a positive association between the reference allele (A) and Class II and that the alternate allele (G) is associated with Class III. Conclusions: cephalometric analysis revealed no significant differences among genotypes, suggesting that while genetic factors are implicated in malocclusion, they may not directly affect cephalometric parameters or that the sample size was too small to detect these differences. The discovery of an A > T transversion in one individual with a Class II deformity underscores the genetic diversity within the population and the necessity of comprehensive genotyping to uncover rare genetic variants that might influence craniofacial development and the risk of malocclusion. This study highlights the need for larger studies to confirm these preliminary associations.

Evaluation of the anterior dentoalveolar relationship in skeletal Class III malocclusion patients with different vertical facial patterns using cone-beam computed tomography

OBJECTIVES

To measure and compare labiolingual inclinations of the teeth and alveolar bone and the anterior dentoalveolar inclination in patients with skeletal Class III malocclusions with different vertical facial patterns using cone-beam computed tomography (CBCT).

MATERIALS AND METHODS

Based on the inclusion and exclusion criteria, 84 CBCT images of patients with untreated skeletal Class III malocclusion were selected. There were 28 patients each in the hypo-, normo-, and hyperdivergent groups. The labiolingual inclinations of the teeth, the corresponding alveolar bone, and the anterior dentoalveolar inclinations were measured and analyzed statistically.

RESULTS

The inclinations of the mandibular canine and corresponding alveolar bone were smaller in the hypodivergent group than in the hyperdivergent group. The inclination of the alveolar bone and the maxillary dentoalveolar inclination were smaller in the hyperdivergent group than in the hypodivergent group.

CONCLUSIONS

There were differences in the inclination of the teeth, corresponding alveolar bone, and dentoalveolar inclinations at different positions among skeletal Class III patients with different vertical facial patterns. The roots were generally located on the labial side of the alveolar bone.

Impact of molar teeth distalization by clear aligners on maxillary alveolar bone thickness and root resorption: a three‑dimensional study

OBJECTIVE

This study aimed to evaluate the impact of molar teeth distalization movement by clear aligners on changes in the alveolar bone thickness and orthodontically induced inflammatory root resorption (OIIRR) in maxillary molars using conebeam computed tomography (CBCT).

MATERIALS AND METHODS

Three-dimensional CBCT scans of 35 adult patients (one hundred forty maxillary molars) with pre-designed selection criteria and a mean age of 24.4 ± 7.1 years were included. The measured parameters, including alveolar bone thickness for maxillary molars and root resorption (OIIRR), were analyzed using pre-and post-treatment CBCT (T0 and T1, respectively) with Invivo 6.0 software.

RESULT

Post-treatment, relevant statistically significant changes included deposition of bone in the average palatal surface of the 1st molars. The reduction of bone was seen in the average buccal surface of the first molars and both surfaces of the second molars. Regarding root length after treatment, the average maxillary 1st molar roots showed significant OIIRR (p < 0.001).

CONCLUSION

Clear aligner treatment could effectively reduce the incidence of alveolar bone thickness reduction and OIIRR in treating Class II malocclusions compared to conventional braces, as shown in previous studies. This research will aid in fully grasping the benefits of clear aligners.

Genetic architecture of non-syndromic skeletal class III malocclusion

Non-syndromic skeletal Class III malocclusion is a major craniofacial disorder characterized by genetic and environmental factors. Patients with severe skeletal Class III malocclusion require orthognathic surgery to obtain aesthetic facial appearance and functional occlusion. Recent studies have demonstrated that susceptible chromosomal regions and genetic variants of candidate genes play important roles in the etiology of skeletal Class III malocclusion. Here, we provide a comprehensive review of our current understanding of the genetic factors that affect non-syndromic skeletal Class III malocclusion, including the patterns of inheritance and multiple genetic approaches. We then summarize the functional studies on related loci and genes using cell biology and animal models, which will help to implement individualized therapeutic interventions.

Three-dimensional evaluation of alveolar bone and pharyngeal airway dimensions after mandibular dentition distalization in patients with Class III malocclusion: a retrospective study

BACKGROUND

To three-dimensionally evaluate changes of the alveolar bone around the mandibular anterior teeth and pharyngeal airway dimensions in adults with Class III malocclusion before and after orthodontic treatment of mandibular dentition distalization.

METHODS

In this retrospective study, cone-beam computed tomography (CBCT) scans of 20 patients with Class III malocclusion who underwent mandibular dentition distalization were obtained both before and after treatment. Three-dimensional changes of the thickness and vertical marginal bone levels around mandibular incisors and canines were assessed and compared. And airway volumes of the palato-, glosso-, laryngopharynx and the minimum axial area were measured and compared before and after treatment.

RESULTS

A significant decrease of lingual bone thickness of mandibular incisors, partial labial and lingual bone thickness of canines were observed (P < 0.05). The reduction in root length of incisors and canines, labial and lingual vertical marginal bone levels were significant after orthodontic treatment. No significant correlations between mandibular dentition distalization and pharyngeal airway dimensions were observed.

CONCLUSIONS

Mandibular dentition distalization could result in the loss of alveolar bone around anterior teeth in Class III malocclusion, especially for the cervical marginal bone. Pharyngeal airway dimensions were not affected to a high extent after distalization.

TRIAL REGISTRATION

Retrospctively registered.

3D assessment of alveolar bone alterations in orthodontic movement among Indians

Apical root resorption, which is characterised as a biological or abnormal phenomenon that shortens the length of the root apex, is additional typical iatrogenic impact of orthodontic tooth movement that may jeopardise the effectiveness of treatment and tooth lifespan. The main goals of the current retrospective investigation were to assess the dimensions of alveolar bone alterations that come along with orthodontic movement and to look into the frequency and extent of resorption of root in maxillary incisors across categories that were similarly managed with clear aligners (OCA) and fixed appliances (OFA) using CBCT. The study included 50 subjects who were divided into two categories with 25 study subjects in each category. Category OFA: Subjects receiving OFA (n=25). A CBCT scan was used to get three-dimensional pictures at the beginning of therapy as well as at the end of therapy. The overall resorption of root at apical region in OFA group was 0.63±0.21 mm. The overall resorption of root at apical region in OCA group was 0.32 ±0.36 mm. The difference in observation was statistically significant (p= 0.000) with reduced resorption of root at apical region in clear aligners. It was concluded that the decrease in thickness of alveolar bone was greater in orthodontic fixed appliances group as compared to clear aligners. The resorption of root at apical region was lesser in clear aligners group as compared to fixed appliances.

Alveolar bone changes following bi-maxillary vertical molars' movements using clear aligners

OBJECTIVE

This study aimed to assess the alveolar bone changes following maxillary and mandibular molars' intrusion and extrusion movements using Clear Aligners using Cone-Beam Computed Tomography (CBCT).

MATERIALS AND METHODS

This is a retrospective clinical study in which 24 adult patients with pre-designed selection criteria and a mean age of 31.1 + 9.9 years were enrolled. The alveolar bone changes around one hundred thirty-three maxillary and mandibular molars intruded or extruded by Clear Aligners therapy were analyzed from CBCT using Invivo 6.0 software. Intra- and inter-examiner reliability analysis was performed using the intra-class correlation coefficient (ICC) and Cronbach's Alpha statistics. The paired t-test was used to analyze significant differences before and after treatment (T0-T1). The significance level was considered at P < 0.05.

RESULT

The patients were divided into two groups: extrusion (48.9%, n = 65 molars' root) and intrusion (51.1%, n = 68 molars' root) group. There was a significant decrease in the alveolar bone changes in the buccal surface of the mandibular right and left 1st molars in the extrusion group (-1.05 ± 0.97, -0.76 ± 1.12 mm, respectively) and the maxillary left 2nd molars in intrusion group (-0.42 ± 0.77 mm), and the lingual surface of intrusion of the mandibular left 1st molar (-0.64 ± 0.76 mm). Comparing the mean maxillary and mandibular changes (T0-T1) of both studied groups showed that the buccal alveolar bone changes for the left 1st and right 2nd molars showed a significant difference in extrusion and intrusion groups, respectively.

CONCLUSIONS

The buccal alveolar bone changes is considered the most affected surface following maxillary and mandibular molars' intrusion and extrusion movements using clear aligners, with mandibular molars being more affected than the maxillary ones.

Evaluation of cuspid cortical anchorage with different sagittal patterns using cone-beam computed tomography: a retrospective study

BACKGROUND

No studies have focused on cortical anchorage resistance in cuspids, this study aimed to characterize the cortical anchorage according to sagittal skeletal classes using cone-beam computed tomography (CBCT).

METHODS

CBCT images of 104 men and 104 women were divided into skeletal class I, II, and III malocclusion groups. Skeletal and dental evaluations were performed on the sagittal and axial cross-sections. One-way analysis of variance followed by least significant difference post-hoc tests was used for group differences. Multiple linear regression was performed to evaluate the relationship between influential factors and cuspid cortical anchorage.

RESULTS

All cuspids were close to the labial bone cortex in different sagittal skeletal patterns and had different inclinations. There was a significant difference in the apical root position of cuspids in the alveolar bone; however, no significant difference in the middle or cervical portions of the root was found between different sagittal facial patterns. The middle of the cuspid root was embedded to the greatest extent in the labial bone cortex, with no significant difference between the sagittal patterns. For all sagittal patterns, 6.03 ± 4.41° (men) and 6.08 ± 4.45° (women) may be appropriate root control angles to keep maxillary cuspids' roots detached from the labial bone cortex.

CONCLUSIONS

Comparison of skeletal class I, II, and III malocclusion patients showed that dental compensation alleviated sagittal skeletal discrepancies in the cuspid positions of all patients, regardless of the malocclusion class. Detailed treatment procedures and clear treatment boundaries of cuspids with different skeletal patterns can improve the treatment time, periodontal bone remodeling, and post-treatment long-term stability. Future studies on cuspids with different dentofacial patterns and considering cuspid morphology and periodontal condition may provide more evidence for clinical treatment.

A quantitative three-dimensional comparative study of alveolar bone changes and apical root resorption between clear aligners and fixed orthodontic appliances

BACKGROUND

This study aimed to evaluate and compare the alveolar bone changes and to investigate the prevalence and severity of orthodontically induced inflammatory root resorption (OIIRR) of maxillary incisors in patients who received treatment with clear aligners (CA) versus conventional fixed appliances (FA), using cone-beam computed tomography (CBCT).

METHODS

One hundred sixty maxillary incisors from 40 patients with similar baseline characteristics based on the American Board of Orthodontics discrepancy index scores were divided into the CA and FA groups. The dentoalveolar quantitative changes were analyzed using pre- (T0) and post-treatment (T1) CBCT. The measured parameters included alveolar bone thickness (ABT), alveolar bone height (ABH), root length (OIIRR), and maxillary incisor inclinations.

RESULTS

Post-treatment, the average palatal and total ABT significantly decreased in central and lateral incisors in the FA group. In contrast, the CA group's average labial ABT of the lateral incisors decreased considerably. Regarding the ABH, both groups showed significant labial and palatal marginal bone resorption. In both groups, root lengths significantly decreased after treatment (p < 0.005). The inter-group comparison revealed that ABT and root length had significantly decreased in the FA group compared to the CA group, while the ABH showed no significant difference between the two groups. The mean absolute reductions of ABT and OIIRR in the CA group were significantly less (- 0.01 ± 0.89 and 0.31 ± 0.42) than those in the FA group (0.20 ± 0.82 and 0.68 ± 0.97), respectively.

CONCLUSIONS

CA and FA treatments appear to cause a significant ABT reduction and a statistically significant increased OIIRR in the maxillary incisor region, with a greater extent expected with FA treatment. However, the increased OIIRR values in the majority of both groups' cases were not clinically significant. Both treatment modalities resulted in a significant ABH reduction, with the highest found in the labial side of lateral incisors in the CA group.

Geometric Morphometric Analysis of Mandibular Symphysis Growth between 12 and 15 Years of Age in Class II Malocclusion Subjects

The aim of the present paper was to evaluate the morphology changes of the mandibular symphysis (MS) in a longitudinal retrospective cohort of class II untreated subjects. The study sample included 120 subjects followed during normal growth and examined at the age of 12 (T0) and 15 (T1) years. MS was traced using two landmarks and ten sliding semi-landmarks. The acquired morphological data were processed via Procrustes superimposition that allowed to study variation and covariation in MS'form according to specific variables such as age, gender, and skeletal pattern. The first two principal components (PCs) described more than 90 % of the total morphological variation. Both types of form changes of the symphysis could be associated with the different skeletal vertical growth patterns. Age and sex did not interfere with the form of chin symphysis. Moreover, there was no significant covariation between initial MS morphology and form modifications. Clinicians should not expect to be faced with spontaneous changes of the form of the symphysis during the orthodontic treatment of adolescents.

Evaluation of the correlation between facial index and the cortical bone thickness of the maxilla and mandible-A computer tomography based study

OBJECTIVES

cortical bone thickness confines the position of teeth and thus can be a limiting factor for orthodontic tooth movement. The study is aimed to correlate the cortical bone thickness of the maxilla and mandible with that of different face types, viz; dolichofacial, brachyfacial, and mesofacial.

METHODS

Forty CT scans were analysed for the face types and were grouped into dolichofacial (13), brachyfacial (13) and mesofacial (14) face types. The scans were measured for the right and left side buccal and lingual cortical bone thickness at the central incisor, first and second molar regions on both the maxilla and mandible. Other parameters like basal cortical bone thickness, height, and width of cortical bone were also measured. To determine the correlation and difference between the different parameters, the obtained data was subjected to the correlation coefficient, t test, and ANOVA statistical analysis.

RESULTS

Maxillary buccal cortical bone thickness of central incisors was found to be highly correlated to facial index with a correlation coefficient of - 0.833 * *. Mandibular buccal bone thickness correlated with face type and cortical bone thickness at the central incisor, first, and second molars by-0.531 * *, - 0.474 * *, and - 0.589 * *, respectively. There was a significant difference between the right and left side cortical bone thickness (p < 0.05) and also for all the parameters amongst the different face types (p < 0.05).

CONCLUSION

There exists a definite correlation between the face type and the certain anatomical measurements of cortical bone morphology. Dolichofacial face types show thin buccal cortical bone, which implies the limitation of orthodontic tooth movement in these types of individuals.

Detailed Correlation between Central Incisor Movement and Alveolar Bone Resorption in Adults with Orthodontic Premolar Extraction Treatment: A Retrospective Cohort CBCT Study

Background: This study aims to explore the detailed correlation between the movement of maxillary and mandibular central incisors and alveolar bone resorption in adults who had orthodontic premolar extraction treatment. Methods: A total of 63 adult patients (mean age, 24.41 years) who received orthodontic treatment with the extraction of four first premolars were included in this study. CBCT images were obtained before and after treatment. Three-dimensional evaluations of the movement of 252 central incisors (126 maxillary and 126 mandibular incisors) and alveolar bone changes were conducted. Four points were used to describe the incisor movement: C (cusp point), R (root apex point), M (mid-point of root neck), and L (labial cementoenamel junction point). The thickness of labial and palatal alveolar bone was assessed at the crestal, mid-root, and apical levels of incisors. The results were analyzed with Spearman’s correlation and multilinear regression. Results: Matching the measurements of central incisor movement and alveolar bone resorption, significant correlations could be observed. For maxillary central incisors, the labial alveolar bone resorption at the crestal level was correlated with the movement of Point L (r = 0.290, p < 0.05), and the labial alveolar bone resorption at the apical level was correlated with Point M (r = 0.387, p < 0.05). For mandibular central incisors, the labial alveolar bone resorption at the apical level was correlated with the movement of Point M (r = 0.493, p < 0.05) and R (r = 0.498, p < 0.01); the palatal alveolar bone resorption at the mid-root level with Point M (r = -0.170, p < 0.01); and the palatal alveolar bone resorption at the apical level with Point R (r = 0.177, p < 0.01). Conclusions: This study investigated the concrete correlations between central incisor movement and alveolar bone resorption in adults after orthodontic treatment with premolar extraction. It is potentially helpful for orthodontists to have a relatively accurate prediction of alveolar bone resorption based on the specific movements of central incisors and to reduce the risk of alveolar bone resorption by better adjusting the three-dimensional movement types of incisors.

CBCT Evaluation of the maxillary palatine process as a donor site for the regeneration of periodontal defects

Background

The maxillary palatine process (MPP) is an excellent source of autogenous bone transplants for anterior maxillary reconstruction. This research aimed to determine the quantity and quality of accessible MPP as a donor location.

Methods

Cone-beam computed tomography (CBCT) scans of patients referred to the School of Dentistry were evaluated by a certified examiner. The harvestable MPP was defined as the space between the distal surfaces of maxillary first premolars. OnDemand 3D Imaging software was used to determine bone properties. SPSS software was used to investigate the following variables: Bone characteristics are correlated with age and gender, accessible volume, and palatal width and height. P<0.05 was defined as the level of statistical significance.

Results

This study was performed on CBCT scans of 81 subjects (41 females and 40 males). MPP volume and palatal heights were 1.33±0.53 cm3 and 20.86±5.51 mm, respectively. Maximum bone density was observed around lateral incisors. Palatal width was 33.81±2.42 mm between canines and 41.81±2.66 mm between premolars. The MPP volume was significantly greater in males (P<0.001). Additionally, there was a positive correlation between the volume and palatal width (P<0.05).

Conclusion

Within the constraints of this research, there is a limited supply of MMP accessible for use as a graft source, and it is best suited for treating localized bone lesions. The favorable link between palatal breadth and harvestable volume aids the surgeon in estimating the quantity of bone accessible during the first evaluation.

Relationship between alveolar-bone morphology at the mandibular incisors and their inclination in adults with low-angle, skeletal class III malocclusion—A retrospective CBCT study

Objective

To quantitatively study the effect of the labial inclination of the mandibular central incisors on the surrounding cortical and cancellous-bone morphology among patients with low-angle, skeletal class III malocclusion, by using cone-beam computed-tomography (CBCT) imaging.

Materials and methods

The CBCT images of 60 patients with low-angle, skeletal class III malocclusion were divided into lingual-inclination, upright, and labial-inclination groups. The height of the alveolar bone and the thickness and area of the cortical, cancellous, and total alveolar bone were measured separately on each side of the mandibular central incisors.

Results

The thickness of the labial cortical bone from 6 mm below the cementoenamel junction (CEJ) to the root apex; the thickness of the labial cancellous bone at the root apex; the total thickness of the alveolar bone at the root apex; the area of labial cortical bone; the total area of labial alveolar bone; and the height of the labial alveolar bone were highest in the labial-inclination group (all P<0.05). All these variables were positively correlated with the labial inclination of the mandibular central incisors (all P<0.05). There were no statistical differences between the groups for any of the measurements on the lingual side of the teeth (P>0.05).

Conclusion

The morphology of the alveolar bone on the labial but not the lingual side of the mandibular central incisors was statistically significantly correlated with the labial inclination of those teeth in patients with low-angle, skeletal class III malocclusion.

The Role of Morphometric Characteristics of Anterior Maxilla in Planning the Interventions Accompanied by Orthodontic Teeth Movement – An Overview

The anterior maxilla or premaxilla is part of the upper jaw and the most significant content of this region, from the aspect of orthodontic therapy, are the incisor teeth. The frequency of complications during orthodontic movement of the upper incisors refers to a more detailed evaluation of the anatomical structures of the premaxilla. The aim of this study was to investigate morphological and morphometric characteristics of the anterior maxilla by cone beam computed tomography, which could be of interest for planning orthodontic teeth movement. By reviewing the available literature, we compared the values of the alveolar bone height, the distance between the alveolar crest and enamel – cement boundary, total alveolar bone width, the thickness of the buccal, and palatal plate, nasopalatine canal, and accessory canals of the anterior maxilla. The results of our study show changes in the labial and palatal aspects of the alveolar bone height during orthodontic interventions. Different results of the alveolar bone width are in correlation with gender, age, and type of orthodontic tooth movement. Distance between the nasopalatine canal and maxillary central incisors was estimated at the value from 4 to 6 mm, which is below the recommended value for maximum incisal retraction by Proffit. Research results show variations in shape, length, and diameter of the nasopalatine canal, which indicates individual varieties detected on cone beam computed tomography. Other anatomical structures and measures show an insignificant correlation with orthodontic teeth movement. According to the contradictory results of the available articles, it is required to achieve an individual approach to orthodontic interventions in the area of the anterior maxilla.

Alveolar bone thickness overlying healthy maxillary and mandibular teeth: A systematic review and meta-analysis

OBJECTIVE

To systematically review and meta-analyse the Alveolar Bone Thickness (ABT) overlying healthy teeth. The secondary objective was to review the association of ABT with gender, age, and smoking.

MATERIALS AND METHODS

The PubMed, Embase, Scopus, ProQuest, Web of Science, and Cochrane Library databases were searched up to July 2020. English articles (sample size≥10) which had used CT or CBCT to measure the ABT at clearly defined reference points were included. The maximum likelihood approach meta-analysis was used to estimate the means (95% CIs).

RESULTS

A total of 68 articles were included. The meta-analysis results were as follows: In the anterior maxilla, the mean labial plate thickness ranged from 0.42-1.75mm, while it was thicker for the posterior teeth (0.78-4.31mm). The palatal plate thickness ranged from 0.97-8.13mm. In the anterior mandible, the thickness of labial and lingual plates ranged from 0.4-3.71mm and 0.38-5.44mm, respectively. The alveolar bone was thicker for the posterior teeth both at the labial (0.66-6.31mm) and lingual (2.31-7.77mm) sides. Meta-regression revealed a significant relationship between gender and ABT at several points. There was a controversy regarding the association of ABT with age. No significant difference was evidenced between smokers and non-smokers.

CONCLUSIONS

This study presents a clear image of the alveolar bone structure. Since it has pooled ABT values from various populations, outcomes could be acknowledged as global averages. Therefore, it could provide perspective for several dental procedures, including orthodontic treatments and immediate implant placement.

Comparison of distance of upper central incisor root and incisive canal in different sagittal and vertical skeletal patterns and sex: A retrospective CBCT study

INTRODUCTION

To evaluate the influence of sagittal and vertical skeletal patterns (skeletal classes and facial profiles), and sex on the distance between upper central incisors roots and incisive canal.

MATERIAL AND METHODS

Cone-beam computed tomography exams of 172 patients were classified into skeletal classes I, II, and III and according to the facial profile into mesofacial, brachyfacial, and dolichofacial. In sagittal reconstructions, linear measurements were done between central incisors roots and incisive canal at three levels: incisive foramen opening, intermediate region, and the region close to the apex of upper central incisors. In axial reconstructions, measurements of incisive canal width and distance between the roots were obtained. Analysis of Variance (three-way ANOVA) was used to evaluate measurement differences in relation to skeletal classes, facial profiles, and sex.

RESULTS

The distance between upper central incisors roots and incisive canal anterior region was little influenced by sagittal and vertical skeletal patterns and sex. Men had significantly greater incisive canal (mean=2.85mm; SD=1.18) width compared to women (mean=2.40mm; SD=1.04), regardless of skeletal class and facial profile (P<0.05). In general, inter-root distance between medial points of central incisors roots and incisive canal opening was greater in the region close to upper central incisors apex (mean=3.84mm; SD=1.44) than in incisive foramen opening (2.44mm; SD=1.04), (P<0.05).

CONCLUSIONS

The distance between upper central incisors roots and incisive canal is little influenced by sagittal and vertical skeletal patterns and sex.

<p>Predictive Factors Affecting the Maxillary Alveolar Bone Thickness: A Cone-Beam Computed Tomography Study</p>

Purpose

Many important structures are associated with the maxillary alveolar bone and should be considered during orthodontic tooth movement. The purpose of this study was to investigate the correlation between the anterior maxillary alveolar bone thickness (AMABT), inclination of the central incisors, and the incisive canal (IC), as well as changes in the thickness based on age and sex of the patients.

Methods

This cross-sectional study was conducted using archived cone-beam computed tomography (CBCT) records categorized according to age and sex. The parameters measured were; AMABT at three levels: alveolar crest, mid-root, and apex; incisor to palatal plane (Inc/PP) angle and IC width at palatal opening. OnDemand 3D Imaging software was utilized for image reconstruction and measurement. Data were analyzed using linear regression analysis and Mann–Whitney test. A P-value of <0.05 was considered significant.

Results

Out of the 300 CBCT images assessed, only 135 images (70 males and 65 females; age range=17–63 years) fulfilled the inclusion criteria. The Inc/PP angle had a significant effect on the AMABT at the alveolar crest and mid-root levels (P<0.01). Width of the IC at palatal opening had a significant effect on AMABT at the mid-root and apex level (P<0.01). Age had a significant effect on AMABT at three levels (P<0.05). Males demonstrated significantly greater AMABT at all levels than females (P<0.01).

Conclusion

There was an association between AMABT and the Inc/PP angle, width of the IC at palatal opening, age, and sex of the patients.

Alveolar bone changes in maxillary and mandibular anterior teeth during orthodontic treatment: A systematic review and meta-analysis

The association between tooth movement and remodelling of surrounding bone is controversial. To analyse the effect of tooth movement on alveolar bone changes in maxillary and mandibular anterior teeth by cone-beam computed tomography (CBCT). The Embase, Cochrane Library and Medline databases were searched without any language restrictions. Longitudinal studies using CBCT to observe alveolar bone changes of maxillary and mandibular anterior teeth during orthodontic treatment were included. Two independent reviewers performed the study selection, data extraction and methodological quality assessment. A total of 26 studies were included in this review, 14 of which were eligible for quantitative synthesis. In extraction cases, meta-analysis showed vertical bone loss on the labial (0.36 mm) and lingual (0.94 mm) sides of maxillary incisors, and lingual bone thickness decreased significantly at the cervical level (0.57 mm). In non-extraction cases, vertical alveolar bone loss was significant on the labial side (0.97 mm) and lingual side (0.86 mm) of mandibular incisors. Subgroup analysis for skeletal class III patients indicated that vertical alveolar bone loss was 1.16 mm on the labial side and 0.83 mm on the lingual side of mandibular incisors. The absence of high-quality studies and the high heterogeneity of the included studies were limitations of this systematic review and meta-analysis. Based on limited evidence, alveolar bone height and thickness, especially at the cervical level, decreased during both labial and lingual movement of anterior teeth.