The relationship between the dimensions of frontal air sinus and skeletal malocclusions: A systematic review and meta-analysis

Objective

The goal of this systematic review and meta-analysis was to assess whether the dimensions of the frontal air sinus correlate with skeletal malocclusion.

Study selection

PubMed, Scopus, Embase, and Google Scholar were searched for relevant studies published up to May 23, 2023. The review included observational and retrospective studies that compared the dimensions of the frontal air sinus between different skeletal malocclusions. The PECOS method was used in this study ("Population, Exposure, Comparator, Outcome, and Study design"). The search was done using the following English keywords: "frontal sinus" OR "lateral cephalometric" OR "malocclusion" AND "surface area".

Results

Seven studies were included, which involved 1101 participants, of whom 403 were class I, 375 were class II, and 323 were class III. These studies had a moderate risk of bias. The surface area of the frontal sinus in class III was significantly larger than in class I (standardized difference in means (SDM) = -0.971; 95 % CI = -1.147- -0.796; P < 0.001) and in class II (SDM = -1.535; 95 % CI = -1.732- -1.337; P < 0.001).

Conclusion

Class III malocclusion is associated with a larger surface area of the frontal sinus compared to classes I and II.

Evaluation of an objective staging system for assessment of cervical vertebral maturation

BACKGROUND

The aim of this study was to evaluate an objective method for Cervical Vertebral Maturation (CVM) staging.

METHODS

An initial sample of 647 Lateral Cephalometric Radiographs (LCR) were staged according to the CVM (Baccetti et al.) by 4 examiners. The final sample (n = 394) included LCR on which the staging of the 4 investigators matched. The objective staging was performed by a single operator. The sample was divided according to the maturational stages into pre-pubertal, pubertal and post-pubertal groups. Measurements were performed on the cervical vertebrae (C2, C3 and C4). The angle between posterior and superior borders for C3 and C4 was the Superior Wall Inclination Angle (SWIA). Concavity Depth (CD) for C2, C3 and C4, and Body Shape (BS) (ratio of width to height of C3 and C4). Measurements of the 3 groups were compared.

RESULTS

Reliability of subjective staging was high (intra-observer reliability, 0.948; inter-observer reliability, 0.967). Good agreement was observed for the outcomes measured. Intra-observer reliability was good (0.918, 0.885 and 0.722 for CD, BS and SWIA, respectively). The same was for the inter-observer reliability results (0.902, 0.889 and 0.728 for CD, BS and SWIA, respectively). Significant differences were observed for mean values of SWIA and BS and median values of CD within maturational stage. Similar findings were observed when the outcomes were compared at different phases (P < 0.001).

CONCLUSIONS

A standardized, objective staging system using linear, angular measurements and ratios was applied for the determination of cervical vertebral maturation.

Recommendations for standard criteria for the positional and morphological evaluation of temporomandibular joint osseous structures using cone-beam CT: a systematic review

OBJECTIVE

This systematic review aimed to appraise the reliability and comprehensiveness of imaging methods in studies that used three-dimensional assessment of the temporomandibular joint (TMJ) in order to propose a standardized imaging method.

METHODS

Six databases/search engines were searched up until September 2022. The outcomes of interest included measurements of the mandibular condyle, glenoid fossa, joint spaces, or the entire TMJ. Two checklists were utilized: one to assess the risk of bias, with a maximum score of 37, and the other, a pre-designed checklist consisting of 22 items to evaluate the comprehensiveness of the methods used, with a maximum score of 33.

RESULTS

Out of the 2567 records retrieved, only 14 studies, which used cone bean computed tomography (CBCT), were deemed eligible and thus included in the qualitative analysis. Three studies were deemed of low risk of bias, while the remaining studies were rated as moderate to high risk of bias, primarily due to improper reporting of inter-observer agreement, varying reliability values, and a limited number of cases included in the reliability analysis. Regarding the comprehensiveness of the methods used, only four studies achieved relatively high scores. The deficiencies observed were related to the reporting of variables such as slice thickness and voxel size, absence of or improper reporting of intra- and inter-examiner reliability analyses, and failure to assess all osseous components of the TMJ.

CONCLUSION

CBCT-based methods used to assess the positions and morphology of TMJ bony structures appear to be imperfect and lacking in comprehensiveness. Hence, criteria for a standardized assessment method of these TMJ structures are proposed.

CLINICAL RELEVANCE STATEMENT

Accurately, comprehensively, and reliably assessing the osseous structures of the temporomandibular joint will provide valid and valuable diagnostic features of the normal temporomandibular joint, and help establish potential associations between these osseous features and temporomandibular disorders.

REGISTRATION

The protocol for this systematic review was registered at the International Prospective Register of Systematic Reviews (PROSPERO, No.: CRD42020199792).

KEY POINTS

•Although many methods have been introduced to assess the osseous structure of the temporomandibular joint, they yielded inconsistent findings. •None of the published studies comprehensively assessed the temporomandibular joint. •Recommendations for a comprehensive temporomandibular joint osseous assessment method were suggested for better validity and reliability of future research.

Dimensional and positional temporomandibular joint osseous characteristics in normodivergent facial patterns with and without temporomandibular disorders

OBJECTIVE

This study evaluated the dimensional and positional osseous temporomandibular joint features in normodivergent facial patterns with and without temporomandibular disorders.

METHODS

A total of 165 adult patients were divided into two groups: group 1 (n = 79 patients; 158 joints): temporomandibular disorders patients and group 2 (n = 86 patients; 172 joints): non-temporomandibular disorders patients. Three-dimensional positional and dimensional temporomandibular joint characteristics, including glenoid fossa, mandibular condyles, and joint spaces, were assessed by cone beam computed tomography.

RESULTS

The glenoid fossa positions in the three orthogonal planes and height showed statistical significance between the two studied groups. The temporomandibular disorders patients showed higher horizontal and vertical condyle inclinations while anteroposterior inclination was less, and the condyle was positioned more superior, anterior, and lateral in the glenoid fossa. The condyle width and length showed no significance between the two groups, while condyle height was smaller in temporomandibular disorders patients. Anterior and medial joint spaces increased while the superior and posterior joint spaces reduced in temporomandibular disorders patients.

CONCLUSION

There were significant differences between the patients with and without temporomandibular joint disorders in terms of mandibular fossa positions and height as well as condylar positions and inclinations in horizontal and vertical planes together with reduced condylar height and reduced posterior and superior joint spaces in the temporomandibular disorders patients.

CLINICAL RELEVANCE

The temporomandibular disorder is a multifactorial disorder in which one of these factors is the dimensional and positional characteristics of the temporomandibular joints; including or excluding this factor requires a comprehensive three-dimensional investigation of patients with TMD compared to the normal group under the condition that the facial pattern is average as a confounding factor.

Three-dimensional phenotype characteristics of skeletal class III malocclusion in adult Chinese: a principal component analysis-based cluster analysis

BACKGROUND

Skeletal class III malocclusion has a diverse and complicated aetiology involving environmental and genetic factors. It is critical to correctly classify and define this malocclusion to be diagnosed and treated on a clinically sound basis. Thus, this study aimed to provide reliable and detailed measurements in a large ethnically homogeneous sample of Chinese adults to generate an adequate phenotypic clustering model to identify and describe the skeletal variation present in skeletal class III malocclusion.

MATERIALS AND METHODS

This is a retrospective cross-sectional study in which 500 pre-treatments cone-beam computed tomography (CBCT) scans of patients with skeletal class III malocclusion (250 males and 250 females) were selected following specific selection criteria. Seventy-six linear, angular, and ratios measurements were three-dimensionally analysed using InVivo 6.0.3 software. These measurements were categorised into 47 skeletal, 18 dentoalveolar, and 11 soft tissue variables. Multivariate reduction methods: principal component analyses and cluster analyses were used to present the most common phenotypic groupings of skeletal class III malocclusion in Han ethnic group of Chinese adults.

RESULTS

The principal component analysis revealed eight principal components accounted for 72.9% of the overall variation of the data produced from the seventy-six variables. The first four principal components accounted for 53.37% of the total variations. They explained the most variation in data and consisted mainly of anteroposterior and vertical skeletal relationships. The cluster analysis identified four phenotypes of skeletal class III malocclusion: C1, 34%; C2, 11.4%; C3, 26.4%; and C4, 28.2%.

CONCLUSION

Based on three-dimensional analyses, four skeletal class III malocclusion distinct phenotypic variations were defined in a large sample of the adult Chinese population, showing the occurrence of phenotypic variation between identified clusters in the same ethnic group. These findings might serve as a foundation for accurate diagnosis and treatment planning of each cluster and future genetic studies to determine the causative gene(s) of each cluster.

Quantitative and qualitative condylar changes following stabilization splint therapy in patients with temporomandibular joint disorders

OBJECTIVE

This study aimed to explore the quantitative and qualitative condylar changes following stabilization splint (S.S) therapy, including condylar position, morphology, and bone mineral density (BMD) in subjects with temporomandibular disorders (TMD).

MATERIALS AND METHODS

In this retrospective clinical study, we enrolled 40 TMD subjects (80 joints) aged 18 to 35 years, for whom a S.S was used to treat TMD. The 80 TMD consists of 32 masticatory muscle disorders (myalgia) and 48 TMJ disorders (arthralgia). Cone beam computed tomography (CBCT) was used to scan the TMJs of subjects pre- and post-treatment for three-dimensional analysis (3D). Using Mimics software v.21.0, quantitative (3D condylar and joint spaces dimensions parameters were measured using linear measurements in millimeters, according to the Kamelchuk method and Ikeda method, while the assessment of anteroposterior condyle position within the glenoid fossa was based on the method of Pullinger and Hollender), and qualitative (a round bone tissue with an area of 2 mm² in three representative areas according to the Kamelchuk method to measure condylar BMD) pre- and post-treatment. Intra- and inter-group statistical comparisons were performed using the Wilcoxon signed ranks and the Kruskal-Wallis test, respectively.

RESULTS

The course of treatment was 6-12 months, with an average of 9.1 months. For the pre- and post-treatment quantitative comparisons, there was a statistically significant difference in the anterior joint space (AJS) and coronal medial space, as well as the condyle length in the myalgia group and condylar width in the arthralgia group. For qualitative measurements, a significant difference was observed in the posterior slope of the myalgia group and the arthralgia group's anterior, superior, and posterior slopes. The inter-group comparisons revealed significant differences in AJS, condylar length, and anterior slope density.

CONCLUSION

In short-term follow-up, the S.S influenced patients with TMD from different origins; it changes anterior and coronal medial joint space, condyle length in myalgia, and width in arthralgia. Furthermore, it improved the condyle bone density more evidently in arthralgia.

CLINICAL RELEVANCE

This study highlights the influence of S.S on symptomatic populations with TMD of different origins from a qualitative and quantitative perspective.

The dimensional and morphological assessment of frontal air sinus in different ages, genders and ethnicities (Arabian-Caucasian and Han-Chinese sub-populations)

OBJECTIVE

This study aimed to assess the dimensional and morphological measurements of the frontal air sinuses in different ages and genders in the two ethnicities.

MATERIALS AND METHODS

This retrospective study included 360 subjects (160 males and 200 females) of both ethnicities. Subjects were divided based on age and gender into four groups, including an equal number of both males and females, for each age and ethnic group. The frontal air sinus dimensions were measured utilizing lateral cephalometric radiographs and computed using Winceph version 9.0 software. The frontal air sinus dimensions were compared between age groups in both genders and between ethnicity using an independent sample t test. The relationship between the frontal air sinus dimensions and subjects' age was evaluated using Pearson's correlation coefficient.

RESULT

The frontal air sinuses measurements were larger in males than females in both ethnicities, except for the frontal sinus index, which was found to be larger in females than males. The frontal air sinus surface area and height showed statistically significant differences between the two age groups in both ethnicities (P < 0.05). The Arabian-Caucasian patients had a larger frontal sinus surface area, height, and depth than the Han-Chinese patients in both age groups.

CONCLUSION

The size of the frontal air sinus increases with age; and continues to expand after the age of 20 years. Based on the Arabian-Caucasian and Han-Chinese sub-population findings, the frontal sinus is an effective tool for determining gender and appears to have potential in ethnicity identification.

A quantitative three-dimensional comparative study of alveolar bone changes and apical root resorption between clear aligners and fixed orthodontic appliances

BACKGROUND

This study aimed to evaluate and compare the alveolar bone changes and to investigate the prevalence and severity of orthodontically induced inflammatory root resorption (OIIRR) of maxillary incisors in patients who received treatment with clear aligners (CA) versus conventional fixed appliances (FA), using cone-beam computed tomography (CBCT).

METHODS

One hundred sixty maxillary incisors from 40 patients with similar baseline characteristics based on the American Board of Orthodontics discrepancy index scores were divided into the CA and FA groups. The dentoalveolar quantitative changes were analyzed using pre- (T0) and post-treatment (T1) CBCT. The measured parameters included alveolar bone thickness (ABT), alveolar bone height (ABH), root length (OIIRR), and maxillary incisor inclinations.

RESULTS

Post-treatment, the average palatal and total ABT significantly decreased in central and lateral incisors in the FA group. In contrast, the CA group's average labial ABT of the lateral incisors decreased considerably. Regarding the ABH, both groups showed significant labial and palatal marginal bone resorption. In both groups, root lengths significantly decreased after treatment (p < 0.005). The inter-group comparison revealed that ABT and root length had significantly decreased in the FA group compared to the CA group, while the ABH showed no significant difference between the two groups. The mean absolute reductions of ABT and OIIRR in the CA group were significantly less (- 0.01 ± 0.89 and 0.31 ± 0.42) than those in the FA group (0.20 ± 0.82 and 0.68 ± 0.97), respectively.

CONCLUSIONS

CA and FA treatments appear to cause a significant ABT reduction and a statistically significant increased OIIRR in the maxillary incisor region, with a greater extent expected with FA treatment. However, the increased OIIRR values in the majority of both groups' cases were not clinically significant. Both treatment modalities resulted in a significant ABH reduction, with the highest found in the labial side of lateral incisors in the CA group.

Three dimensional evaluation of the skeletal and temporomandibular joint changes following stabilization splint therapy in patients with temporomandibular joint disorders and mandibular deviation: a retrospective study

BACKGROUND

Three-dimensional (3D) detailed evaluations of the mandibular mediolateral position, mandibular condylar position, and temporomandibular joint (TMJ) spaces following stabilization splints (SS) therapy in patients with temporomandibular joint disorders (TMD) and mandibular deviation (MD) have not been reported in the available literature. Accordingly, this study aimed to three-dimensionally analyze the skeletal and bony temporomandibular joint changes following stabilization splint therapy in adult patients with temporomandibular joint disorders and mandibular deviation.

METHODS

This study is a retrospective clinical study that enrolled 26 adult patients with TMD and MD with a mean age of 24.86 years. The Diagnostic Criteria for Temporomandibular Disorders (DC/TMD) was used to diagnose TMD. SS was adjusted weekly until occlusal contact stabilization occurred, and then adjusted monthly, patients were instructed to wear it at night for at least 10 h. The SS was removed after the elimination of TMD symptoms (TMJ/muscle pain on palpation, muscle spasm, and clicking) and having both condyles completely seated in a musculoskeletally stable position. Pre- and post-therapeutic Cone Beam Computed Tomography (CBCT) was analyzed. Mandibular mediolateral position, TMJ spaces, and mandibular condyle position were analyzed three-dimensionally using Mimics 21.0 software. Paired t-test or Wilcoxon rank-sum test was performed, and the significance level was considered at P < 0.05.

RESULTS

The treatment period with SS therapy was 10.07 ± 3.1 months. The deviated chin was improved in 69.23% of the sample; the range of improvement was > 0 mm ≤ 3.9 mm. The mandibular rotation was significantly decreased from 3.58 ± 2.02° to 3.17 ± 1.60. The deviated side's superior and posterior joint TMJ spaces were significantly increased from 2.49 ± 0.88 mm and 1.25 ± 0.79 mm to 2.98 ± 1.02 mm and 1.86 ± 0.72 mm, respectively. The value of the difference from the bilateral condyle head position to the X and Z axes significantly decreased from 2.50 ± 1.56 mm and 2.30 ± 1.57 mm to 1.64 ± 1.58 mm and 1.82 ± 1.11 mm, respectively.

CONCLUSION

The main positional effect of the stabilization splint treatment in TMD patients with MD includes considerable correction of mandibular deviation, improving facial asymmetry, and moving the condyle into a stable condylar position; these were done by promoting the mandible to rotate around the Z (roll) and Y (yaw) axes and by forward, downward, and outward condylar movement on the deviated side, respectively.

Qualitative and quantitative three-dimensional evaluation of maxillary basal and dentoalveolar dimensions in patients with and without maxillary impacted canines

Background

This study aimed to three-dimensionally evaluate the qualitative and quantitative maxillary basal, dentoalveolar, and dental dimensions in patients with unilateral or bilateral maxillary impacted canines relative to their normal peers.

Materials and methods

This is a retrospective comparative study. Cone-beam computed tomography images of one hundred and fifty adult patients were divided into three equal groups: unilateral, bilateral, and control groups. Each had 50 patients that were three-dimensionally analysed. The quantitative measurements involved three basal (molar basal width, premolar basal width, and arch depth), seven dentoalveolar (molar alveolar width, premolar alveolar width, inter-molar width, inter-premolar width, inter-canine width, arch length, and arch perimeter), and two dental (canine length and width) measurements. The qualitative measurements included four bone density areas (buccal, lingual, mesial, and distal) around the maxillary impacted canines.

Result

Differences between the three groups were statistically different for the quantitative measurements involving the two basal variables (molar basal width and premolar basal width) and all measured dentoalveolar variables; these were smaller in the unilateral and bilateral groups compared with the control group (p < 0.001). Unilateral and bilateral impacted canine groups showed significantly wider and shorter canines than the control group (p < 0.001). The qualitative measurements (the four bone density areas) around unilateral and bilateral impacted canine groups showed significantly greater density than the control group (p < 0.001). There was no significant qualitative or quantitative difference between the unilateral and bilateral impacted canines. The three groups had no significant variations in terms of arch depth.

Conclusion

Maxillary unilateral and bilateral canine impactions are associated with reduced basal and dentoalveolar dimensions as well as wider and shorter maxillary canines compared to normal peers. The quality of bone around unilateral and bilateral impacted maxillary canines is higher than in non-impacted cases. Unilateral and bilateral canine impactions have quite similar qualitative and quantitative parameters.

Orthodontic camouflage versus orthodontic-orthognathic surgical treatment in borderline class III malocclusion: a systematic review

Objective

This systematic review evaluated the available evidence regarding the skeletal, dentoalveolar, and soft tissue effects of orthodontic camouflage (OC) versus orthodontic-orthognathic surgical (OOS) treatment in borderline class III malocclusion patients.

Methods

Eligibility criteria. The included studies were clinical trials and/or follow-up observational studies (retrospective and prospective). Information sources. PubMed, Scopus, Science Direct, Web of Science, Cochrane, and LILACS were searched up to October 2021. Risk of bias. Downs and Black quality assessment checklist was used. Synthesis of results. The outcomes were the skeletal, dentoalveolar, and soft tissue changes obtained from pre- and post-cephalometric measurements.

Results

Included studies. Out of 2089 retrieved articles, 6 were eligible and thus included in the subsequent analyses. Their overall risk of bias was moderate. Outcome results. The results are presented as pre- and post-treatment values or mean changes in both groups. Two studies reported significant retrusion of the maxillary and mandibular bases in OC, in contrast to significant maxillary protrusion and mandibular retrusion with increased ANB angle in OOS. Regarding the vertical jaw relation, one study reported a significant decrease in mandibular plane inclination in OC and a significant increase in OOS. Most of the included studies reported a significant proclination in the maxillary incisors in both groups. Three studies reported a significant proclination of the mandibular incisors in OOS, while four studies reported retroclination in OC.

Conclusion

Interpretation. The OSS has a protrusive effect on the maxillary base, retrusive effect on the mandibular base, and thus improvement in the sagittal relationship accompanied with a clockwise rotational effect on the mandibular plane. The OC has more proclination effect on the maxillary incisors and retroclination effect on the mandibular incisors compared to OOS. Limitation. Meta-analysis was not possible due to considerable variations among the included studies. Owing to the fact that some important data in the included studies were missing, conducting further studies with more standardized methodologies is highly urgent. Registration. The protocol for this systematic review was registered at the International Prospective Register of Systematic Reviews (PROSPERO, No.: CRD42020199591).

Clinical relevance

The common features including skeletal, dental, and soft tissue characteristics of borderline class III malocclusion cases make it more difficult to select the most appropriate treatment modality that can be either OC or OOS. The availability of high-level evidence—systematic reviews—makes the clinical decision much more clear and based on scientific basis rather than personal preference.

Supplementary Information

The online version contains supplementary material available at 10.1007/s00784-022-04685-6.

Skeletal and dentoalveolar effects of class II malocclusion treatment using bi-maxillary skeletal anchorage: a systematic review

BACKGROUND

The goal of this systematic review was to assess the available evidence regarding the skeletal and dentoalveolar effects of bi-maxillary skeletal anchorage devices (BMSADs) used in treating growing class II malocclusion patients.

METHODS

A comprehensive search was conducted on PubMed, Scopus, Science Direct, Web of Science, Cochrane, and LILACS up to November 2021, which was augmented by a manual search. The studies included were clinical trials (RCTs) and/or follow-up observational studies (retrospective and prospective). The outcomes of interest were the skeletal, dentoalveolar, and occlusal treatment-induced changes obtained from pre- and post-cephalometric measurements. The risks of bias of the included studies were assessed using an assessment tool from previous publications.

RESULTS

Out of 742 screened articles, only 4 were eligible and thus included in the qualitative synthesis. They showed a moderate overall risk of bias. The results are presented as mean changes in both the study and control groups. All studies reported retrusion of the maxillary base and advancement of the mandible (meaning reduced ANB angle). Three of the included studies reported an increase in the vertical jaw relation, which was contrary to what the fourth study reported. Three studies reported an increase in the maxillary incisors' inclination or position, while one study reported their retroclination. Proclination of the mandibular incisors happened in two studies, whereas the other two studies reported retroclination. The overjet was reduced in all included studies.

CONCLUSION

Apart from the protrusive effects on the mandible, retrusive effects on the maxilla, and the consequent reduction of the overjet, BMSADs results in inconsistent skeletal and dentoalveolar effects. However, the current evidence is limited due to the variability in the biomechanics of the intermaxillary components, type of anchorage, and comparable groups in the included studies. Further RCTs with more standardized methodologies are highly encouraged.

CLINICAL RELEVANCE

BMSADs (using miniscrews or miniplates on both jaws) induces more skeletal than dentoalveolar effects. However, this must be practiced with caution, based on the benefit to risk (surgical insertion) ratio, and the limited evidence available in hand so far. Registration The protocol for this systematic review was registered at the International Prospective Register of Systematic Reviews (PROSPERO, No.: CRD42020199601).

Predictive factors associated with adjacent teeth root resorption of palatally impacted canines in Arabian population: a cone-beam computed tomography analysis

Background

This study aimed to evaluate three-dimensionally the factors associated with adjacent teeth root resorption of palatally impacted canines.

Methods

In this retrospective cross-sectional study, one-hundred and fourteen cone beam computed tomography scans with palatally impacted maxillary canines were evaluated for the presence of adjacent root resorption. Seven parameters were analyzed: alignment of maxillary incisors, presence of deciduous canines, first premolars’ roots configuration, impacted canines rotation, angulation of impacted canine to the midline, contact relationship, and area of contact with adjacent teeth. The association between dependent and independent qualitative and quantitative variables was analyzed using chi-square and independent student’s t-test, respectively. The multivariate analysis was performed using regression analysis. The significant value was set at P ≤ 0.05.

Results

The overall incidence of vertical, horizontal impaction and adjacent root resorption were 92, 8 and 77.2%, respectively. The apical third was the most involved area (57%); resorption of a single tooth was found in 21.9% of the total sample. The most common resorbed teeth were lateral first premolars (24.6%), followed by central lateral incisors (20.2%), and lateral incisors (15.8%) of the total sample. The severity of resorption was highest in grade I (31.5%) and lowest in grade III (7.6%). Three variables showed significant differences between resorption and non-resorption groups namely; canine rotation (P < 0.013), contact relationship (P < 0.001), and area of contact with adjacent teeth (P < 0.001). Regression analysis revealed an association between adjacent root resorption and permanent canine rotation, adjacent premolars’ roots configuration, contact relationship, and area of contact (P < 0.05).

Conclusion

Two-thirds of impacted maxillary canines showed a form of root resorption. The most commonly resorbed tooth was the lateral incisors while the least affected one was the central incisors with apical one-third being of the highest risk. The predisposing factors including the canine rotation, premolar with separated roots, contact relationship, and area of contact with adjacent teeth are to be considered for any interceptive treatment.

Morphological and dimensional variations of the frontal air sinuses in a group of adolescent Caucasians and Chinese in different skeletal malocclusions: a cross-sectional cephalometric study

OBJECTIVE

This study aimed to evaluate the morphological and dimensional variations of the frontal air sinuses in a group of adolescent Caucasians and Chinese with different skeletal malocclusions in both genders.

MATERIALS AND METHODS

This retrospective study included 290 adolescent Caucasians and Chinese patients with 145 each. Each sample included 90 females and 55 males and was categorized based on ANB angle in reference to each population norms into 65 skeletal class I, 50 skeletal class II, and 30 skeletal class III malocclusions. All linear, angular, and surface area measurements of the frontal air sinuses were evaluated using lateral cephalometric radiographs and calculated using Winceph version 8 software. The frontal air sinus parameters were compared between genders and the two ethnic groups using an independent sample t-test. ANOVA with Tukey's post hoc tests were used to compare the frontal air sinus parameters between the three skeletal malocclusions.

RESULT

The frontal air sinus width and surface area were found to be significantly greater in Caucasians when compared with Chinese patients. According to gender, the frontal air sinus length, width, and surface area, as well as the glabella convexity, were greater in males than females, while the frontal air sinus index (length/width) was significantly greater in females than males in both ethnic groups. In both ethnic groups, the frontal air sinus surface area was significantly greater in skeletal class III malocclusion when compared to skeletal class I and class II malocclusions in Caucasians (P = 0.0022) and Chinese (P = 0.0097). There was a weak-to-moderate correlation between the frontal air sinus parameters and the nasio, sella, and glabella positions (R = -0.56 to 0.62).

CONCLUSION

The frontal air sinus dimensions and surface area varied greatly in between ethnic groups, genders, and malocclusion types. The frontal air sinus parameters were correlated with nasion, sella, and glabella positions.

CLINICAL RELEVANCE

These findings could assist orthodontists, ENT specialist, and forensic medical investigators to focus on the size of frontal sinus during treatment planning, the relationship between the size of frontal air sinus and malocclusions, and age determination.

Three-dimensional assessment of the favorability of maxillary posterior teeth intrusion in different skeletal classes limited by the vertical relationship with the maxillary sinus floor

Background

Understanding the anatomical relationship between the maxillary sinus floor (MSF) and the posterior maxillary teeth (PMT) is important when planning the orthodontic intrusion of the posterior teeth. This study aimed to determine the vertical relationship between posterior maxillary teeth and maxillary sinus floor in different skeletal classes in the Chinese adult population.

Methods

This is a retrospective cross-sectional study involved cone beam computed tomography images of 298 adult patients (145 males and 153 females) between 20 and 45 years old. The sample was categorized according to A point, Nasion, B point (ANB) angle into 102 Class I, 102 Class II, and 94 Class III malocclusion. Non-parametric Wilcoxon Mann–Whitney U and Kruskal–Wallis tests were used to compare the studied groups. The Intra-class Correlation Coefficient (ICC) was used to assess the intra- and inter-observer reliability analysis.

Results

Overall, there was a statistically significant difference in the mean distance between both genders (P < 0.001). The measured distance increased with age in all posterior tooth roots (P < 0.001). The root apex in the sagittal view appeared to be closer to the maxillary sinus than in the coronal view; 2.2 ± 4.3 and 3.1 ± 5.5 mm, respectively. The most frequent root scores were Type 1 and Type 2P. In both sagittal and coronal views, Class I demonstrated a higher Type 2P prevalence, whereas Class III showed a lower prevalence. The second molars’ mesiobuccal root had the largest number of penetration in the three examined skeletal classes.

Conclusions

Maxillary molars of Class I malocclusion with the majority of Type 2P root-sinus relationship have the highest possible risk of root resorption during molar intrusion due to cortical bone encroachment, while Class III malocclusion showed the least possible risk.

Supplementary information

The online version contains supplementary material available at 10.1186/s13005-022-00316-3.

Evaluation of Spheno-occipital Synchondrosis Fusion in Chinese Population Using CBCT: A Cross-sectional Study

AIM

This study sought to assess the fusion of spheno-occipital synchondrosis (SOS) in Chinese population using cone-beam computed tomography (CBCT).

MATERIALS AND METHODS

This is a cross-sectional study in which data were randomly collected based on the pre-existing institutional records. Following selection criteria, the CBCT images of 500 patients aged 6-25 years (226 males and 274 females) were analyzed. Three-dimensional virtual models were oriented at a standardized position, then adjusted to the median sagittal plane (MSP) view. A four-stage scoring system was used; completely open, partially fused, semi-fused, or completely fused. The student's t-test, one-way ANOVA, Pearson correlation, and linear regression analysis were used and the significant level was set at ≤0.05.

RESULTS

The mean age of closure of stages 1, 2, 3, and 4 were 7.44, 9.62, 12.94, and 19.03 years in females, and 8.79, 11.13, 14.82, and 20.18 years in males, respectively. There was significantly strong positive correlation between spheno-occipital fusion and age (female: r = 0.853, male: r = 0.879; p <0.001), with 1.47 ± 0.33 years earlier fusion in females. All inter- and intra-stages mean ages were statistically significant in both genders. The transition age model demonstrated a mean age (in years) between stages 1-2 (10.1), stages 2-3 (12.79), and stage 3-4 (17.93) for males, and stages 1-2 (8.96), stages 2-3 (11.45), and stage 3-4 (16.69) for females.

CONCLUSIONS

The present findings of SOS stages of fusion in both genders could guide age estimation and assessment of normal skeletal growth patterns and active skeletal growth period in the Chinese population.

CLINICAL SIGNIFICANCE

There is still controversy about the time to closure of the SOS because of population and assessment technique variations. This study could be used as a reference for the specific examined population during planning for dentofacial orthopedic and/or orthognathic surgery and dental implant prosthesis for both genders. Moreover, these finding may be useful for medical purposes.

Cone beam computed tomography findings in the temporomandibular joints of chronic qat chewers: Radiographic bone density and trabecular microstructural analyses

OBJECTIVES

This cross-sectional comparative study investigated the effects of qat chewing habit on the radiographic bone density (RBD) and trabecular microstructure of temporomandibular joint condyles using cone beam computed tomography (CBCT).

STUDY DESIGN

In total, 85 systemically healthy Yemeni males were included and divided into qat chewers (QCs; n = 41); and non-qat chewers (NQCs; n = 44). The participants responded to a structured questionnaire and underwent standardized clinical examination and CBCT scanning of the temporomandibular joint. Measurements of RBD and trabecular microstructure (trabecular thickness, trabecular separation, bone volume fraction, and fractal dimension) were performed. Statistical significance was established at P ≤ .05.

RESULTS

No statistically significant differences were found between QCs and NQCs in RBD or trabecular microstructure. The mean standard deviations and maximum values of trabecular separation on the nonchewing side for QCs were significantly lower compared to the corresponding values for NQCs (0.60 and 2.68 for QCs vs 0.72 and 3.05 for NQCs; P = .025 and .05, respectively). A comparison between chewing and nonchewing sides in QCs revealed no significant differences.

CONCLUSIONS

Qat chewing habit induces insignificant changes in condylar RBD and trabecular microstructure as detected by CBCT. Further studies using advanced radiographic techniques are warranted.

Dimensional and Positional Associations between the Mandibular Condyle and Glenoid Fossa: A Three-dimensional Cone-beam Computed Tomography-based Study

AIM

This retrospective cross-sectional study investigated the dimensional and positional associations between the mandibular condyle and glenoid fossa (GF) using cone-beam computed tomography (CBCT).

MATERIALS AND METHODS

Seventy female subjects [140 temporomandibular joints (TMJs)] were divided into two groups. Group I included 35 subjects with normal facial profiles (NFPs) in which the soft tissue glabella, subnasal point, and the soft tissue chin are almost in the same straight line, while the 35 subjects in group II had abnormal facial profiles (AFPs) in which the same imaginary line is either convex or concave indicating variation from standard norms. Three-dimensional volume analyses were performed on CBCT images by digitizing all landmarks in three orthogonal planes to measure the dimensional and positional parameters of the condyle and GF. Then the Pearson's correlation coefficient was used to identify associations between different condyle and GF parameters.

RESULTS

Sagittal condylar surface area was significantly associated with all dimensional parameters of the GF (GF height, width, and surface area, condylar width, and the GF width and between the axial and coronal condylar surface area with GF height and GF width) on the right and left sides of both groups (p values ranging from 0.000 to 0.028). Positional associations were detected between the anteroposterior and mediolateral GF positions and the corresponding position of the mandibular condyles and between the anteroposterior condylar position and the vertical GF position on both sides of both groups (p values ranged from 0.000 to 0.015).

CONCLUSION

There is a strong association between the mandibular condyle and GF in both positional and dimensional measurements in patients with normal and abnormal facial profiles.

CLINICAL SIGNIFICANCE

Understanding the associations between the mandibular condyle and GF facilitates optimization of the treatment outcomes by increasing occlusal harmony and stability after orthodontic treatment, orthognathic surgery, or any prosthetic replacement.

Cone beam computed tomography findings in temporomandibular joint of chronic qat chewers: Dimensional and osteoarthritic changes

The social habit of chewing qat (also known as khat) is widely practised in East Africa and the Arabian Peninsula. It has been linked with various oro-facial conditions, including temporomandibular joint disorders (TMD). This cross-sectional, comparative study sought to investigate the effects of qat chewing on temporomandibular joint (TMJ), using cone beam computed tomography (CBCT). A total of 85 Yemeni males were included. The participants were divided into two groups: Qat chewers (QC; n = 41) and non-qat chewers (NQC; n = 44). Relevant data were obtained using a structured questionnaire and standardised clinical examination. Additionally, CBCT images of the TMJs were obtained, and then, osteoarthritic changes and TMJ dimensions were analysed. SPSS 21 was used for statistical analyses, with a significant level was set at 0.05. Compared to NQC, a significantly higher proportion of QC presented with clinical signs of TMDs. The qualitative CBCT findings revealed significantly higher osteoarthritic changes in QC than in NQC: osteophyte (51.2% vs 22.7%; P = .008), subcortical sclerosis (48.8% vs 27.3%; P = .047), articular surface flattening (46.3% vs 6.8%; P = .009) and subcortical cysts (43.9% vs 4.5%; P < .001). However, CBCT quantitative findings (condylar dimensions) did not show significant differences between the two groups. The chewing side of the QC group showed slightly more changes compared to the non-chewing side. The results demonstrate that qat chewing has detrimental effects on TMJ manifested mainly as osteoarthritic changes. Further large-scale studies are recommended.

Evaluation of different low-dose multidetector CT and cone beam CT protocols in maxillary sinus imaging: part I-an in vitro study

OBJECTIVES

This in vitro study aimed to assess radiation dose and image quality of different low-dose multidetector CT (MDCT) and CBCT imaging protocols in comparison with the standard MDCT protocol for maxillary sinus imaging.

METHODS

Effective dose (E) and image quality of 10 MDCT (changing effective milliampere second starting from 141.3 EmAs to 20 EmAs) and 3 CBCT protocols (changing milliampere second and voxel size) were assessed throughout scanning an anthropomorphic head and neck Alderson Rando phantom. E values were calculated using thermoluminescent dosemeters (TLDs) fixed at 6 sensitive organs (14 sites) on the Rando phantom. Image quality was assessed objectively (by calculating the standard deviation values of the radiographic density of water) and subjectively (by assessing the diagnostic image quality using a four-graded scale: 1 = very good, 2 = good, 3 = acceptable and 4 = unacceptable).

RESULTS

Two MDCT protocols (120 kV/32 EmA and 120 kV/25 EmA) had lower radiation doses with statistically significant differences (p < 0.001) compared with that of the standard MDCT protocol (120 kV/141.3 EmA), and they preserved a good diagnostic image quality. One CBCT protocol (120 kV/20 mA) had a reasonable radiation dose and good image quality. There were no statistically significant differences between the above-mentioned lower dose MDCT and CBCT protocols (p > 0.05) with respect to the radiation dose and image quality.

CONCLUSIONS

The low-dose MDCT and CBCT protocols are viable methods for maxillary sinus examination as evaluated using the above-mentioned phantom that yield a good diagnostic image quality using E approximately 7 and 11 times lower than that of the standard MDCT, respectively. These findings were evaluated in the in vivo part of this project.