Ecotoxicity of doped zinc oxide nanoparticles: Perspectives on environmental safety

Studies on the ecotoxicity of doped zinc oxide nanoparticles (ZnO NPs) are recent, with the first publications starting in 2010. In this sense, this is the first study that comprehensively reviews the ecotoxicological effects of ZnO NPs doped with lanthanide elements to fill this literature gap. This research explores a multifaceted question at the intersection of nanotechnology, toxicology, and environmental science. Different types of dopants commonly used for ZnO doping were investigated in this review, focusing on the ecotoxicological effects of lanthanides as dopants. Bacteria were the main class of organisms used in ecotoxicological studies, since antimicrobial activity of these nanomaterials is extensively explored to combat the imminent problem of resistant bacteria, in addition to enabling the safe use of these nanomaterials for biomedical applications. Doping appears to exhibit greater efficacy when compared to undoped ZnO NPs in terms of antimicrobial effects; however, it cannot be said that it has no impact on non-target organisms. An extensive examination of the literature also establishes the importance and need to evaluate the effects of doped ZnO NPs on organisms from different environmental compartments in order to identify their potential impacts. We underscore the dearth of research information regarding the environmental toxicity/ecotoxicity of doped ZnO nanoparticles across various ecological levels, thereby limiting the extrapolation of findings to humans or other complex models. Therefore, we emphasize the urgency of a multi-parameter assessment for the development of sanitary and environmentally safe nanotechnologies.

Ecotoxicological effects of zinc oxide nanoparticles (ZnO-NPs) on aquatic organisms: Current research and emerging trends

The rapid advancement of nanotechnology has contributed to the development of several products that are being released to the consumer market without careful analysis of their potential impact on the environment. Zinc oxide nanoparticles (ZnO-NPs) are used in several fields and are applied in consumer products, technological innovations, and biomedicine. In this sense, this study aims to compile existing knowledge regarding the effects of ZnO-NPs on non-target organisms, with the goal of ensuring the safety of human health and the environment. To achieve this objective, a systematic review of the available data on the toxicity of these nanomaterials to freshwater and marine/estuarine aquatic organisms was carried out. The findings indicate that freshwater invertebrates are the most commonly used organisms in ecotoxicological tests. The environmental sensitivity of the studied species was categorized as follows: invertebrates > bacteria > algae > vertebrates. Among the most sensitive species at each trophic level in freshwater and marine/estuarine environments are Daphnia magna and Paracentrotus lividus; Escherichia coli and Vibrio fischeri; Scenedesmus obliquus and Isochrysis galbana; and Danio rerio and Rutilus caspicus. The primary mechanisms responsible for the toxicity of ZnO-NPs involve the release of Zn2+ ions and the generation of reactive oxygen species (ROS). Thus, the biosynthesis of ZnO-NPs has been presented as a less toxic form of production, although it requires further investigation. Therefore, the synthesis of the information presented in this review can help to decide which organisms and which exposure concentrations are suitable for estimating the toxicity of nanomaterials in aquatic ecosystems. It is expected that this information will serve as a foundation for future research aimed at reducing the reliance on animals in ecotoxicological testing, aligning with the goal of promoting the sustainable advancement of nanotechnology.

Transition metal-based nanoparticles as potential antimicrobial agents: recent advancements, mechanistic, challenges, and future prospects

Bacterial transmission is considered one of the potential risks for communicable diseases, requiring promising antibiotics. Traditional drugs possess a limited spectrum of effectiveness, and their frequent administration reduces effectiveness and develops resistivity. In such a situation, we are left with the option of developing novel antibiotics with higher efficiency. In this regard, nanoparticles (NPs) may play a pivotal role in managing such medical situations due to their distinct physiochemical characteristics and impressive biocompatibility. Metallic NPs are found to possess extraordinary antibacterial effects that are useful in vitro as well as in vivo as self-modified therapeutic agents. Due to their wide range of antibacterial efficacy, they have potential therapeutic applications via diverse antibacterial routes. NPs not only restrict the development of bacterial resistance, but they also broaden the scope of antibacterial action without binding the bacterial cell directly to a particular receptor with promising effectiveness against both Gram-positive and Gram-negative microbes. This review aimed at exploring the most relevant types of metal NPs employed as antimicrobial agents, particularly those based on Mn, Fe, Co, Cu, and Zn metals, and their antimicrobial mechanisms. Further, the challenges and future prospects of NPs in biological applications are also discussed.

Analytical chemistry of engineered nanomaterials: Part 1. Scope, regulation, legislation, and metrology (IUPAC Technical Report)

Analytical chemistry is crucial for understanding the complex behavior observed for engineered nanomaterials (ENMs). A variety of analytical chemistry techniques and methodological approaches are used for isolation/purification and determination of the composition of pristine nanomaterials and for the detection, identification, and quantification of nanomaterials in nano-enabled consumer products and the complex matrices found in cosmetics, food, and environmental and biological samples. Adequate characterization of ENMs also requires physicochemical characterization of number of other properties, including size, shape, and structure. The requirement for assessment of a number of ENM properties frequently requires interdisciplinary approaches and multi-modal analysis methods. This technical report starts with an overview of ENMs definitions and classification, their properties, and analytical scenarios encountered with the analysis of both pristine nanomaterials and complex matrices containing different nanomaterials. An evaluation of the current status regarding nanomaterial identification and characterization for regulatory purposes and legislation, including emerging regulations and related scientific opinions, is provided. The technical report also presents a large and critical overview of the metrology of nanomaterials, including available reference materials and the development and validation of standardized methods that are currently available to address characterization and analysis challenges. The report focuses mainly on chemical analysis techniques and thus it is complementary to previous IUPAC technical reports focused on characterizing the physical parameters of ENMs and on nanotoxicology.

A review on the impacts of nanomaterials on neuromodulation and neurological dysfunction using a zebrafish animal model

Nanomaterials have been widely employed from industrial to medical fields due to their small sizes and versatile characteristics. However, nanomaterials can also induce unexpected adverse effects on health. In particular, exposure of the nervous system to nanomaterials can cause serious neurological dysfunctions and neurodegenerative diseases. A number of studies have adopted various animal models to evaluate the neurotoxic effects of nanomaterials. Among them, zebrafish has become an attractive animal model for neurotoxicological studies due to several advantages, including the well-characterized nervous system, efficient genome editing, convenient generation of transgenic lines, high-resolution in vivo imaging, and an array of behavioral assays. In this review, we summarize recent studies on the neurotoxicological effects of nanomaterials, particularly engineered nanomaterials and nanoplastics, using zebrafish and discuss key findings with advantages and limitations of the zebrafish model in neurotoxicological studies.

Application of Functional and Edible Coatings and Films as Promising Strategies for Developing Dairy Functional Products—A Review on Yoghurt Case

Edible coatings and films appear to be a very promising strategy for delivering bioactive compounds and probiotics in food systems when direct incorporation/inoculation is not an option. The production of dairy products has undergone radical modifications thanks to nanotechnology. Despite being a relatively new occurrence in the dairy sector, nanotechnology has quickly become a popular means of increasing the bioavailability and favorable health effects of a variety of bioactive components. The present review describes, in detail, the various processes being practiced worldwide for yoghurt preparation, microencapsulation, and nanotechnology-based approaches for preserving and/or enriching yoghurt with biologically, and its effect on health and in treating various diseases. In the case of yoghurt, as a perfect medium for functional ingredients supplementation, different gums (e.g., alginate, xanthan gum, and gum arabic), alone or in combination with maltodextrin, seem to be excellent coatings materials to encapsulate functional ingredients. Edible coatings and films are ideal carriers of bioactive compounds, such as antioxidants, antimicrobials, flavors, and probiotics, to improve the quality of dairy food products. Yoghurt is regarded as a functional superfood with a variety of health benefits, especially with a high importance for women’s health, as a probiotic. Consumption of yoghurt with certain types of probiotic strains which contain γ-linolenic acid or PUFA can help solve healthy problems or alleviate different symptoms, and this review will be shed light on the latest studies that have focused on the impact of functional yoghurt on women’s health. Recently, it has been discovered that fermented milk products effectively prevent influenza and COVID-19 viruses. Bioactive molecules from yoghurt are quite effective in treating various inflammations, including so-called “cytokine storms” (hypercytokinaemia) caused by COVID-19.

Sample preparation for the analysis of nanoparticles in natural waters by single particle ICP-MS

With the significant increase in the production and use of nanoparticles (NP), concern is increasing over their release into their environment. Single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) is emerging as one of the best techniques for detecting the very small NP at very low concentrations in natural waters. However, there is no unified protocol for the preparation of natural water samples for SP-ICP-MS analysis. In order to minimize nebulizer blockage, filtration is often used with the expectation that 0.45 μm membranes will not remove significant quantities of 1-100 nm NP. Nonetheless, there are limited data on its effect on the concentrations or size distributions of the NP. To that end, we examined the interactions between six different membrane filters and silver (Ag) and cerium oxide (CeO₂) NP in aqueous samples. For Ag NP, the highest recoveries were observed for polypropylene membranes, where 55% of the pre-filtration NP were found in rainwater and 75% were found in river waters. For CeO₂ NP, recoveries for the polypropylene membrane attained 60% in rainwater and 75% in river water. Recoveries could be increased to over 80% by pre-conditioning the filtration membranes with a multi-element solution. Similar recoveries were obtained when samples were centrifuged at low centrifugal forces (≤1000×g).

Nanomaterials-induced toxicity on cardiac myocytes and tissues, and emerging toxicity assessment techniques

The extensive production and use of nanomaterials have resulted in the continuous release of nano-sized particles into the environment, and the health risks caused by exposure to these nanomaterials in the occupational population and the general population cannot be ignored. Studies have found that particle exposure is closely related to cardiovascular disease. In addition, there have been many reports that nanomaterials can enter the heart tissue, accumulate and then cause damage. Therefore, in the present article, literature related to nanomaterials-induced cardiotoxicity in recent years was collected from the PubMed database, and then organized and summarized to form a review. This article mainly discusses heart damage caused by nanomaterials from the following three aspects: Firstly, we summarize the research 8 carbon nanotubes, etc. Secondly, we discuss in depth the possible underlying mechanism of the damage to the heart caused by nanoparticles. Oxidative stress damage, mitochondrial damage, inflammation and apoptosis have been found to be key factors. Finally, we summarize the current research models used to evaluate the cardiotoxicity of nanomaterials, highlight reliable emerging technologies and in vitro models that have been used for toxicity evaluation of environmental pollutants in recent years, and indicate their application prospects.

Nanomedicines and microneedles: a guide to their analysis and application

The fast-advancing progress in the research of nanomedicine and microneedle applications in the past two decades has suggested that the combination of the two concepts could help to overcome some of the challenges we are facing in healthcare. They include poor patient compliance with medication and the lack of appropriate administration forms that enable the optimal dose to reach the target site. Nanoparticles as drug vesicles can protect their cargo and deliver it to the target site, while evading the body's defence mechanisms. Unfortunately, despite intense research on nanomedicine in the past 20 years, we still haven't answered some crucial questions, e.g. about their colloidal stability in solution and their optimal formulation, which makes the translation of this exciting technology from the lab bench to a viable product difficult. Dissolvable microneedles could be an effective way to maintain and stabilise nano-sized formulations, whilst enhancing the ability of nanoparticles to penetrate the stratum corneum barrier. Both concepts have been individually investigated fairly well and many analytical techniques for tracking the fate of nanomaterials with their precious cargo, both in vitro and in vivo, have been established. Yet, to the best of our knowledge, a comprehensive overview of the analytical tools encompassing the concepts of microneedles and nanoparticles with specific and successful examples is missing. In this review, we have attempted to briefly analyse the challenges associated with nanomedicine itself, but crucially we provide an easy-to-navigate scheme of methods, suitable for characterisation and imaging the physico-chemical properties of the material matrix.

Dye-doped silica nanoparticles: synthesis, surface chemistry and bioapplications

Background

Fluorescent silica nanoparticles have been extensively utilised in a broad range of biological applications and are facilitated by their predictable, well-understood, flexible chemistry and apparent biocompatibility. The ability to couple various siloxane precursors with fluorescent dyes and to be subsequently incorporated into silica nanoparticles has made it possible to engineer these fluorophores-doped nanomaterials to specific optical requirements in biological experimentation. Consequently, this class of nanomaterial has been used in applications across immunodiagnostics, drug delivery and human-trial bioimaging in cancer research.

Main body

This review summarises the state-of-the-art of the use of dye-doped silica nanoparticles in bioapplications and firstly accounts for the common nanoparticle synthesis methods, surface modification approaches and different bioconjugation strategies employed to generate biomolecule-coated nanoparticles. The use of dye-doped silica nanoparticles in immunoassays/biosensing, bioimaging and drug delivery is then provided and possible future directions in the field are highlighted. Other non-cancer-related applications involving silica nanoparticles are also briefly discussed. Importantly, the impact of how the protein corona has changed our understanding of NP interactions with biological systems is described, as well as demonstrations of its capacity to be favourably manipulated.

Conclusions

Dye-doped silica nanoparticles have found success in the immunodiagnostics domain and have also shown promise as bioimaging agents in human clinical trials. Their use in cancer delivery has been restricted to murine models, as has been the case for the vast majority of nanomaterials intended for cancer therapy. This is hampered by the need for more human-like disease models and the lack of standardisation towards assessing nanoparticle toxicity. However, developments in the manipulation of the protein corona have improved the understanding of fundamental bio–nano interactions, and will undoubtedly assist in the translation of silica nanoparticles for disease treatment to the clinic.

A One Health approach to managing the applications and implications of nanotechnologies in agriculture

The need for appropriate science and regulation to underpin nanosafety is greater than ever as ongoing advances in nanotechnology are rapidly translated into new industrial applications and nano-enabled commercial products. Nevertheless, a disconnect persists between those examining risks to human and environmental health from nanomaterials. This disconnect is not atypical in research and risk assessment and has been perpetuated in the case of engineered nanomaterials by the relatively limited overlap in human and environmental exposure pathways. The advent of agri-nanotechnologies brings both increased need and opportunity to change this status quo as it introduces significant issues of intersectionality that cannot adequately be addressed by current discipline-specific approaches alone. Here, focusing on the specific case of nanoparticles, we propose that a transdisciplinary approach, underpinned by the One Health concept, is needed to support the sustainable development of these technologies.

Polycarboxylated Dextran as a Multivalent Linker: Synthesis and Target Recognition of the Antibody-Nanoparticle Bioconjugates in PBS and Serum

Nanoparticles (NPs) functionalized with antibodies on their surface are used in a wide range of research applications. However, the bioconjugation chemistry between the antibodies and the surface of nanoparticles can be very challenging, often accompanied by several undesired effects such as nanoparticle aggregation, antibody denaturation, or poor target recognition of the surface-bound antibodies. Here, we report on a synthesis of fluorescent silica nanoparticle-antibody (NP-Ab) conjugates, in which polycarboxylated dextran is used as the multivalent linker. First, we present a synthetic methodology to prepare polycarboxylated dextrans with molecular weights of 6, 40, and 70 kDa. Second, we used water-soluble, polycarboxylated dextrans as a multivalent spacers/linkers to immobilize antibodies onto fluorescent silica nanoparticles. The prepared NP-Ab conjugates were tested in a direct binding assay format in both phosphate-buffered saline buffer and whole serum to investigate the role of the spacer/linker in the capacity of the NP-Ab to specifically recognize their target in "clean" and also in complex media. We have compared the dextran conjugates with two standards: (a) NP-Ab with antibodies attached on the surface of nanoparticles through the classical physical adsorption method and (b) NP-Ab where an established poly(amidoamine) (PAMAM) dendrimer was used as the linker. Our results showed that the polycarboxylated 6 kDa dextran facilitates antibody immobilization efficiency of nearly 92%. This was directly translated into the improved molecular recognition of the NP-Ab, which was measured by a direct binding assay. The signal-to-noise ratio in buffered solution for the 6 kDa dextran NP-Ab conjugates was 81, nearly 3 times higher than that of PAMAM G4.5 conjugates and 9 times higher than the physically adsorbed NP-Ab sample. In whole serum, the effect of 6 kDa dextran was more hindered due to the formation of protein corona but the signal-to-noise ratio was at least double that of the physically adsorbed NP-Ab conjugates.