Exploring the alteration of environmental radioactivity in terms of compositional elements of heavy minerals in an anthropogenically affected urban river: Radiological and ecological risks assessment

This study explored the alteration of naturally occurring radioactive materials (NORMs: 226Ra (≈238U), 232Th, 40K) in an anthropogenically disrupted urban river-basin (Turag, Bangladesh) in terms of constitutional substances (Sc, Ti, V, Fe, La, Ce, Sm, Eu, Tb, Dy, Ho, Yb, Lu, Hf, Ta, W, Th, U) of heavy-minerals. Average activity concentrations of 226Ra (≈238U), 232Th, and 40K were 41.5 ± 12.9, 72.1 ± 27.1, and 639 ± 100 Bqkg-1, respectively which were relatively higher compared to crustal origin. ∑REEs, Ta, W, Th, and U were ~2 times higher compared to crustal values with Ce and Eu-anomalies. APCS-MLR and PMF receptor models were used to determine the various anthropogenic and/or geogenic sources of NORMs and elements. Layer-wise variations of NORMs and elements were observed to trace the response of sedimentary processes towards the incoming pollution load. Presence of REEs indicates moderate degree of ecological risk to aquatic biota. However, carcinogenic risk (3.84 × 10-4 Sv-1) were significantly higher than threshold limit.

Assessment of radioactivity level and associated radiological hazard in riverbed samples within industrial areas

Terrestrial gamma radiation is one of the major outdoor radiation exposures to the general public that varies substantially based on the type and geological properties of the soil. The objective of this study is to evaluate the naturally occurring radioactive materials (NORMs) distribution and assess the hazard parameters in the riverbank soil within various industrial zones in the densely populated Dhaka and Chattogram cities of Bangladesh. The mean activities of 226Ra (37 ± 3), 232Th (58 ± 4), and 40K (1129 ± 18) Bqkg-1 in the assessed soil samples were found to be slightly higher than the world average values 32, 35, and 420 Bqkg-1, respectively. The mean radium equivalent activity (207.49 Bqkg-1) and the external and internal hazard indices were within the recommended limits of 370 Bqkg-1 and <1, respectively. The mean absorbed dose rate (99.47 nGyhr-1), annual effective dose (0.12 mSva-1), ELCR (4.27 × 10-4), and gamma level index (1.58) exceeded the world average values 59 nGyhr-1, 0.07 mSva-1, 2.9 × 10-4, and 1 respectively. However, the studied areas are safe from a radiological viewpoint with no radiation health hazard to the people. The results of this study can be utilized to produce factual baseline data for future studies.

Elevated levels of environmental radioactivity in fluvial sediment: origin and health risk assessment

To study the geogenic processes of naturally occurring radioactive materials' (NORMs') distribution, a transboundary Himalayan river (Punarbhaba) is chosen due to its trivial anthropogenic impacts. In explaining the genesis of radionuclides, transition elements (Sc, Ti, V, and Fe), rare-earth-elements (REEs: La, Eu, Ce, Yb, Sm, and Lu), Ta, Hf, Th, and U were analysed in 30 riverbed sediments collected from the Bangladeshi portion of the river. Elemental abundances and NORMs' activity were measured by neutron activation analysis and HPGe-gamma-spectrometry, respectively. Averagen=30 radioactivity concentrations of 226Ra (68.4 Bq kg-1), 232Th (85.7 Bq kg-1), and 40K (918 Bq kg-1) were 2.0-2.3-fold higher, which show elevated results compared to the corresponding world mean values. Additionally, mean-REE abundances were 1.02-1.38-times higher than those of crustal origin. Elevated (relative to earth-crust) ratios of Th/U (=3.95 ± 1.84) and 232Th/40K and statistical demonstrations invoke Th-dominant heavy minerals, indicating the role of kaolinite clay mineral abundance/granitic presence. However, Th/Yb, La/V, Hf/Sc, and Th/Sc ratios reveal the presence of felsic abundances, hydrodynamic sorting, and recycling of sedimentary minerals. Geo-environmental indices demonstrated the enrichment of chemical elements in heavy minerals, whereas radiological indices presented ionizing radiation concerns, e.g., the average absorbed-gamma-dose rate (123.1 nGy h-1) was 2.24-fold higher compared to the threshold value which might cause chronic health impacts depending on the degree of exposure. The mean excess lifetime cancer risk value for carcinogen exposure was 5.29 × 10-4 S v-1, which is ∼2-times greater than the suggested threshold. Therefore, plausible extraction of heavy minerals and using residues as building materials can alleviate the two-reconciling problems: (1) radiological risk management and (2) fluvial navigability.

Synergistic blending of biomass, sewage sludge, and coal for enhanced bioenergy production: Exploring residue combinations and optimizing thermal conversion parameters

Creating renewable energy from lignocellulosic biomass is essential for a sustainable future. Due to their abundance and the possibility of producing cheap and clean energy, non-lignocellulosic wastes like sewage sludge from industrial and municipal wastes have drawn attention as a feasible alternative to fossil fuels. These abundant, cost-effective resources may help minimize the effects of climate change since they produce less pollution. Several drawbacks are associated with using sewage sludge in thermal conversion procedures. These issues encompass suboptimal energy yield, elevated ash levels in the final product, and subpar biomass quality. Using these scraps in conjunction with coal might enhance energy conversion processes. This study has revealed the necessity for further investigation into how various combinations of residues interact with each other, influencing synergistic effects and degradation processes. The study's underlying objective was to provide a centralized database on the synergistic effects of mixing biomass and sewage sludge for bioenergy production, coal and biomass, and coal and sewage sludge through thermochemical processes like combustion, pyrolysis, gasification, and hydrolysis with Aspen Plus. This study will assist in enhancing biofuels' output from sewage sludge, coal, and coal/biomass blends in thermal conversion by defining the operating parameters (temperature, heat, and residence duration) of pyrolysis and combustion, features, and chemical properties that may influence these processes.

Fractionation of environmental radioactivity in road dust from a megacity: external and internal health risks

Naturally occurring radioactive materials (NORMs: 232Th, 226Ra, 40K) can reach our respiratory system by breathing of road dust which can cause severe health risks. Targeting the pioneering consideration of health risks from the NORMs in road dust, this work reveals the radioactivity abundances of NORMs in road dust from a megacity (Dhaka) of a developing country (Bangladesh). Bulk chemical compositions of U, Th, and K obtained from neutron activation analysis were converted to the equivalent radioactivities. Radioactivity concentrations of 226Ra, 232Th, and 40K in road dust ranged from 60-106, 110-159, and 488-709 Bq kg-1 with an average of 84.4 ± 13.1, 126 ± 11, and 549 ± 48 Bq kg-1, respectively. Estimated 226Ra, 232Th, and 40K radioactivities were, respectively, 1.7-3.0-, 3.7-5.3-, and 1.2-1.8-folds greater than the affiliated world average values. Mechanistic pathway of NORMs' enrichment and fractionation relative to the major origin (pedosphere) were evaluated concerning the water logging, relative solubility-controlled leaching and translocation, climatic conditions, and aerodynamic fractionations (dry and wet atmospheric depositions). Computation of customary radiological risk indices invokes health risks. Noticing the ingress of NOMR-holding dust into the human respiratory system along with the associated ionizing radiations, the computed radiological indices represent only the least probable health hazards. Nevertheless, in real situations, α-particles from the radioactive decay products of 232Th and 238U can create acute radiation damages of respiratory system. Policymakers should emphasize on limiting the dust particle evolution, and public awareness is required to alleviate the health risks.

Distribution and impacts of contamination by natural and artificial radionuclides in attic dust and urban soil samples from a former industrial Hungarian city: A case study from Salgótarján

Primordial radionuclides can be found in all environmental compartments. Since coal-fired power plants (CFPP) can be a source of additional radionuclide contamination because coal contains natural radioactive isotopes such as 238U (226Ra) and 232Th. This study investigated the impact of such possible radionuclide contamination from former heavy industrial activities, namely a former local coal-fired power plant, in urban soils and attic dust in Salgótarján, Hungary. Even today, industrial by-products, e.g., coal ash, in this city represent significant threat to its residents. A total of 36 attic dust samples (family houses, kindergartens, churches and blockhouses) were collected and 19 urban soil samples (playgrounds, kindergartens, parks and others) were selected no further than 500 m from the corresponding attic dust sampling sites. Additionally, a coal ash and a brown forest soil sample were also collected to differentiate between the anthropogenic and geogenic sources in the residential area. The sampled houses, built between 1890 and 1990, are considered to be representative sampling sites for long-term accumulations of attic dust. The mean values of the total U, Th and Cs (mg kg-1) concentrations as well as those of K (m/m %) in attic dust and urban soil samples are 2.4, 3.6, 1.7 and 0.6 and 1.1, 4.4, 1.2 and 0.3, respectively, measured using ICP-MS. The mean activity concentrations of 226Ra, 232Th, 40K and 137Cs in attic dust and urban soil samples are 43.3, 34.0, 534.4 and 88.5 and 25.1, 32.8, 386.4 and 5.6 Bq kg-1, respectively, by using a low-background iron chamber with a well-type HPGe and a n-type coaxial HPGe detector. The elemental compositions (U, Th) and activity concentrations (226Ra, 232Th) along with their abundances in coal ash from the CFPP increase in both studied media as the distance of the sampling sites from the CFPP decreases. Two outlier attic dust samples in particular show significantly high activity concentrations of 226Ra: 145 and 143, of 232Th: 83 and 94 Bq kg-1, which can be considered as a proxy of unweathered coal ash. The calculated total absorbed gamma dose rate (D) and annual effective dose (E) received from urban soils indicate that the presence of the CFPP, coal ash cone and slag dumps does not cause an increase in the level of background radiation in Salgótarján. However, the concentrations of the studied radionuclides are much higher (except for 232Th) and exhibit higher degree of variability in the samples of attic dustthan in those of urban soils. The study suggests that attic dust preserves the undisturbed 'fingerprints' of long-term atmospheric deposition thanks to its chemical and physical properties unlike urban soil.

Environmental impacts of Indian coal thermal power plants and associated human health risk to the nearby residential communities: A potential review

Worldwide, harmful emissions from coal power plants cause many illnesses contribute to premature deaths burden. Despite its high impact on human health and being a major source of toxic pollutants, coal has been considered a component of global energy for decades. Hence, this work was envisaged to understand the rising environmental and multiple health issues from coal power plants. Studies on the adverse impacts of coal power plants on the environment, including soil, surface water, groundwater and air, were critically evaluated. The health risk from exposure to different pollutants and toxic metals released from the power plant was also demonstrated. The study also highlighted the government initiatives and policies regarding coal power operation and generation. Lastly, the study focused on guiding coal power plant owners and policymakers in identifying the essential cues for the risk assessment and management. The current study found an association between environmental and human health risks due to power generation, which needs intervention from the scientific and medical fields to jointly address public concerns. It is also suggested that future research should concentrate on exposure assessment techniques by integrating source-identification and geographic information systems to assess the health effects of different contaminants from power plants and to mitigate their adverse impact.

Receptor model-based source-specific health risks of toxic metal(loid)s in coal basin-induced agricultural soil in northwest Bangladesh

Toxic metal(loid)s (TMLs) in agricultural soils cause detrimental effects on ecosystem and human health. Therefore, source-specific health risk apportionment is very crucial for the prevention and control of TMLs in agricultural soils. In this study, 149 surface soil samples were taken from a coal mining region in northwest Bangladesh and analyzed for 12 TMLs (Pb, Cd, Ni, Cr, Mn, Fe, Co, Zn, Cu, As, Se, and Hg). Positive matrix factorization (PMF) and absolute principal component score-multiple linear regression (APCS-MLR) receptor models were employed to quantify the pollution sources of soil TMLs. Both models identified five possible sources of pollution: agrochemical practice, industrial emissions, coal-power-plant, geogenic source, and atmospheric deposition, while the contribution rates of each source were calculated as 28.2%, 17.2%, 19.3%, 19% and 16.3% in APCS-MLR, 22.2%, 13.4%, 24.3%, 15.1% and 25.1% in PMF, respectively. Agrochemical practice was the major source of non-carcinogenic risk (NCR) (adults: 32.37%, children: 31.54%), while atmospheric deposition was the highest source of carcinogenic risk (CR) (adults: 48.83%, children: 50.11%). NCR and CR values for adults were slightly higher than for children. However, the trends in NCR and CR between children and adults were similar. As a result, among the sources of pollution, agrochemical practices and atmospheric deposition have been identified as the primary sources of soil TMLs, so prevention and control strategies should be applied primarily for these pollution sources in order to protect human health.

Radiation exposure and health concerns associated with the environmental geochemistry of relatively higher radioactivity in a fresh water basin

This study was carried out on a negligible anthropogenically impacted Indo-Bangla transboundary river basin (Atrai, Bangladesh) to elicit radionuclides' and elemental distributions. Thirty sediment samples were collected from the Bangladesh portion of the river, and instrumental neutron activation analysis and HPGe γ-Spectrometry techniques were used to determine environmental radionuclides (e.g., 232Th, 226Ra, 40K) and associated elemental concentrations, respectively. Metal concentrations (Sc, V, Fe, Eu, Sm, La, Yb, Ce, Lu, Ta, Hf) were determined to comprehend the genesis of greater radioactivity. Recognizing the mean concentration of absorbed gamma dose rate (158.7 hGyh-1) is 2.88-times more than the recommended value (55 hGyh-1) that describes ionizing radiation concerns regarding potential health risks to the surrounding communities and the houses of native residents, which are constructed by Atrai river sediment. This work will assist relevant policymakers in exploring valuable heavy minerals and provide information regarding radiological health risks from a fluvial system.

An overview of the impacts of coal mining and processing on soil: assessment, monitoring, and challenges in the Czech Republic

Coal mining activities are causing an extensive range of environmental issues at both operating and abandoned mine sites. It is one of the most environmentally destructive practices, with the capability to eliminate fauna and flora, impact the groundwater system, and pollute the soil, air, and water. The Czech Republic relies almost exclusively on coal as its primary domestic source of energy. The combined reserves of hard and brown coals in this country are 705 million tons. About 50 million tons of coal is produced annually, making it the 14th biggest producer in the world. Soil degradation is an inevitable outcome of the coal production from surface coal mining procedures in the Czech Republic. Significant changes have taken place in soil productivity, hydraulic characteristics, horizon, and texture as a result of soil pollution, bioturbation, compaction, and weathering. The current review has evaluated the impact of reclamation and coal mining on soil characteristics, including biological, chemical, and physical properties. Additionally, the study has outlined the process of soil formation in reclamation areas in the Czech Republic. In nutshell, research gaps and future directions in understanding coal mining areas and their influences on soils in the Czech Republic are identified.

M. J, Alam MS, Rashid MB, Hossain Z, Khandaker MU, Bradley DA, Yeasmin S. Measurement of radioactivity in soils of Karamjal and Harbaria mangrove forest of Sundarbans for establishment of radiological database

This work presents the first in-depth study of soil radioactivity in the mangrove forest of Bangladesh part of the Sundarbans. It used HPGe gamma-ray spectrometry to measure the amount of natural radioactivity in soil samples from Karamjal and Harbaria sites of the world's largest mangrove forest. The activity concentrations of most of the 226Ra (14±2 Bqkg-1 to 35±4 Bqkg-1) and 232Th (30±5 Bqkg-1 to 50±9 Bqkg-1) lie within the world average values, but the 40K concentration (370± 44 Bqkg-1 to 660±72 Bqkg-1) was found to have exceeded the world average value. The evaluation of radiological hazard parameters revealed that the outdoor absorbed dose rate (maximum 73.25 nGyh-1) and outdoor annual effective dose (maximum 0.09 mSvy-1) for most samples exceeded the corresponding world average values. The elevated concentration of 40K is mainly due to the salinity intrusion, usage of fertilizers and agricultural runoff, and migration of waste effluents along the riverbanks. Being the pioneering comprehensive research on the Bangladesh side of the Sundarbans, this study forms a baseline radioactivity for the Sundarbans before the commissioning of the Rooppur Nuclear Power Plant in Bangladesh.

Perception and legacy of soil chromium and lead contamination in an operational small-scale coal mining community

Operational small-scale coal mining (OSCM) is one of the most significant sources of chromium (Cr) and lead (Pb) pollution in Bangladesh. Attempts to minimize or lessen the use of Cr and Pb in OSCM have shown unsatisfactory results, mainly because they need to address the sociotechnical complexity of pollution concerns in OSCM. This research adopts a multidisciplinary, sociotechnical approach to addressing Cr and Pb problems, coupling soil sampling for Cr and Pb with questionnaires of miners' and inhabitants' perceptions of pollution and its distribution. The study was undertaken in the Barapukuria coal basin in northwest Bangladesh. Except for mining areas (average of 49.80 ± 27.25 mg/kg), Cr levels in soils exceeded the world average in the periphery (73.34 ± 24.39 mg/kg, ~ 1.2 times) and residential areas (88.85 ± 35.87 mg/kg, 1.5 times the world standard of 59.5 mg/kg). Pb levels in soils exceeded national and global averages in mining (53.56 ± 37.62 mg/kg, ~ 1.9 times), periphery (35.05 ± 21.77 mg/kg, ~ 1.3 times), and residential areas (32.14 ± 26.59 mg/kg, ~ 1.2 times) when compared to Bangladesh and global standards of 20 and 27 mg/kg. Pb levels were highest in mining areas, while Cr concentrations were highest in residential areas. The questionnaire findings indicated that miners and inhabitants did not correctly assume that the highest levels of Cr and Pb pollution would be found in these areas. Among all respondents, 54% are unaware of the health impacts of prolonged Cr and Pb exposure. They face respiratory problems (38.6%), skin diseases (32.7%), and other health issues. A large number of people (66.6%) agreed with the fact that Cr and Pb contamination has an impact on drinking water. Cr and Pb pollution has caused 40% crop loss and a 36% decrease in productivity in the agricultural sector. However, respondents underestimated the level of Cr pollution in mining areas, and most assumed that only individuals working directly with mines were impacted by the Cr and Pb content. Participants also rated the reduction of Cr and Pb contamination as of low importance. There is less awareness of Cr and Pb pollution among miners and inhabitants. Sincere efforts to reduce Cr and Pb pollution will likely be met with extra attention and hostility.

Receptor model-based source tracing and risk assessment of elements in sediment of a transboundary Himalayan River

This study utilized surface sediments from a potentially less polluted transboundary Himalayan River (Brahmaputra: China-India-Bangladesh) to investigate the abundance of 15 geochemically and ecologically significant elements and to predict their sources and ecological consequences. INAA was applied to determine the elemental concentrations. The average abundances (μg.g-1) of Rb (94.20), Cs (4.49), Th (20.31), & U (2.73) were 1.12-2.26 folds elevated than shale. Environmental indices disclosed a pollution status ranging from "uncontaminated to moderately contaminated," with minimal Rb, U, and Th enrichment in the downstream zone. Consensus-based sediment quality guideline (SQG) threshold values suggested that only Cr (60% samples > TEL) may impose rare biological effects. Ecological risk indices suggested "minor to no" possible eco-toxicological risks for the accounted elements (Cr, Co, Mn, Zn, Sb, & As). The positive matrix factorization (PMF) model predicated the predominance of geogenic or crustal contributions (∼72.69%) for Al, K, Na, Ti, Co, Zn, Ba, Cs, As, Rb, Th, & U derived from elemental fractionations, mineral weathering, and bio-geo-chemical mobilization. The relative contributions of anthropogenic sources (∼27.31%; such as the construction of roads, settlement expansion, litter disposal, municipal waste discharge, mining activities, agricultural encroachment, etc.) on elemental distribution were significantly lower. The abundance of Cr and Mn was mainly influenced by anthropogenic sources. This study demonstrated the effectiveness of utilizing geo-environmental guidelines and receptor models in discriminating the natural & anthropogenic origins of metals in the complex riverine sediments of a less anthropogenically affected river.

Indexical and statistical approaches to investigate the integrated origins of elements in the sediment of Teesta River, Bangladesh: sediment quality and ecological risk assessment

This study investigates ecological consequences from the combined provenance (natural and manmade) of fifteen metal(oid)s (Na, Al, K, Ti, Cr, Mn, Co, Zn, As, Rb, Sb, Cs, Ba, Th, and U) from a major Indo-Bangla transboundary river (Teesta). Instrumental neutron activation analysis has been performed to calculate the elemental concentration for a total of thirty sediment samples which accumulated from the upper, middle and downstream section of the Teesta River. In comparison with the crustal origin Rb, Th, and U were 1.5-2.8 times elevated. Elements from upstream and midstream sediments showed greater spatial variability than those from downstream sediments in terms of Na, Rb, Sb, Th, and U. Statistical approaches suggested the dominance of geogenic sources (Na, K, Al, Ti, Co, and Ba) of elements over anthropogenic sources (Cr and Zn). Alkali feldspar and aluminosilicates release lithophilic minerals into the sediments under the redox condition (U/Th = 0.18). Site-specific ecotoxicological indices advocated that some specific locations are highly hazardous relative to Cr and Zn. From SQG-based guidelines, Cr showed higher potential toxicity in some upstream locations relative to Zn, Mn, and As. In order to attain the knowledge limitation of northern transboundary rivers from Bangladesh, this study of origin and relative environmental impact will be beneficial for policy makers.

Natural and anthropogenic contributions to the elemental compositions and subsequent ecological consequences of a transboundary river's sediments (Punarbhaba, Bangladesh)

An anthropogenically less affected transboundary river (Punarbhaba, Bangladesh) was studied to detect associated risks from the combined origin(s) of geochemically and toxicologically significant elements in benthic sediments. A total of 30 river bed sediments were analyzed by instrumental neutron activation analysis targeting the 15 chemical elements viz., Na, Al, K, Ti, Cr, Mn, Co, Zn, As, Rb, Sb, Cs, Ba, Th, and U. Among the estimated elements, the mean abundances (μg/g) of Rb (136), Sb (0.66), Cs (6.66), Th (14.6), and U (3.92) were 1.4-1.7 times higher than the crustal origin. These elements are primarily responsible for the contaminated state of the Punarbhaba River. The studied area is 'moderately polluted' (I_geo: 2.01 to 0.02) and possesses 'minor enrichment' (EF: 1.98 to 0.48) in terms of the measured elements. The output of statistical analyses projected that the studied elements are geochemically fractionated in an oxidizing environment (U/Th = 0.44) and mostly originated from felsic sources, thus confirming the mineral is comprised of aluminosilicates and alkali feldspar. However, SQGs-based and ecological risk indices invoked minor (Cr: 6.67%) to no potential ecotoxicological threats for Cr, Mn, Co, Zn, As, and Sb. Nonetheless, altered distribution patterns caused by geogenic activities increased Cr and Zn in the environment which may cause toxicity (Cr: 22-53%, Zn: 35-70%), and pose potential ecological risks, specifically in upstream locations (P-2, P-3, P-5). Further, this study broadened the perspective of sediment deposition from fractionation, fluvial transportation, and weathering events beyond the industrial disintegration of elements, which will aid researchers and policymakers to comprehend combined risks from suspended sediments.

Reconciling the geogenic and non-crustal origins of elements in an Indo-Bangla transboundary river, Atrai: Pollution status, sediment quality, and preliminary risk assessment

This study has been conducted on an anthropogenically less influenced transboundary river (Atrai: Indo-Bangladesh) to comprehend the inherent geochemistry and identify potential elemental sources. In doing so, across the Bangladeshi portion, 30 river-bed samples were culled and studied by neutron activation analysis to quantify the abundances of 15 geochemically and toxicologically significant elementals (Na, Al, K, Ti, Cr, Mn, Co, Zn, As, Rb, Sb, Cs, Ba, Th, and U). The results revealed that the mean concentrations (μg/g) of Rb (154.6), Cs (7.53), Th (20.90), and U (4.88) were 1.5-2.0 times higher than crustal values. Besides, geo-environmental indices revealed 'uncontaminated to moderately contaminated' pollution status with minor enrichment or contamination for Rb, Th, Sb, U, and Cs, relatively concentrated in the mid-to-downstream zone possessed geogenic and non-crustal origins. The positive matrix factorization and other statistical approaches revealed predominant geogenic enrichment of Na, K, Al, Ti, Zn, Cs, Rb, As, Th, and U from differential mineralogical compositions via weathering, elemental fractionations, and biogeochemical mobilization. Contrariwise, several anthropogenic sources (for Cr, Sb, Co, Mn, Th) were also ascertained in the vicinity of Atari River. However, sediment characterization based on SQG threshold values manifested that Cr and Mn possess rare biological effects on local aquatic organisms. Nevertheless, SQGs-based and ecological risk indices invoked minor to no potential ecotoxicological intimidations for the considered metal(oid)s (Cr, Mn, Co, Zn, As, and Sb). Hence, this study manifested the usefulness of a less anthropogenically affected river to reckon geogenic and non-crustal elemental origins in the compounded riverine sediment.

Primordial radionuclides in the dust samples from the educational institutions of central Bangladesh: radiological risk assessment

For the first time, this study presents the radio-activity concentrations of primordial radionuclides in a suite of classroom-dusts collected from 23 schools in central part of Bangladesh. Bulk elemental compositions from instrumental neutron activation analysis (INAA) were transformed into accompanied radio-activity contents (Bq.kg-1). Mean activity contents of 226Ra, 232Th, & 40K in dust samples were 86.0, 43.4, and 448 Bq.kg-1, respectively, which were comparatively elevated relative to the relevant world average value. Higher NORMs abundances were due to the surface soil weathering and aerodynamic fractionations. Estimation of typical radiological-risk indices demonstrates human health risks. Bearing in mind that the greater susceptibility of school-going juveniles & children to the ionizing-radiations & the entering of NORMs-comprising dust-particle into human lungs, calculated radiological indices merely represent the least potential risk. However, in actual cases, α-particles from the 238U and 232Th-decay series can create significant radiation-damage to the respiratory-system.

The multiple value characteristics of fly ash from Indian coal thermal power plants: a review

Coal-powered thermal plants are the primary source of energy production around the globe. More than half (56.89%) of the Indian power plants use coal for power production. Coal burning in power plants results in coal combustion residuals, which contain coal fly ash (CFA) that is recognized as principle by-product. CFA is difficult to characterize due to its broad compositional variation. Hence, the present article summarizes the various physical, chemical, mineralogical, and petrological characterizations of CFA to its use in different applications. Indian coal thermal power plants are found to release two types of CFA: F (fine) and C (coarse). CFA particles are identified as unburned carbon particles with a large fraction of silica oxides, alumina oxides, and iron oxides with a small fraction of calcium oxide (CaO). Morphologically, CFA particles are spherical, with large carbon molecules and a smooth texture surface. In terms of mineralogy; quartz, mullite, magnetite, and hematite are the dominant mineral phases of CFA and tend to be non-plastic, with permeability levels ranging from 8 × 10^-6 to 1.87 × 10^-4 cms^-1. Petrographically, CFA is enriched in inertinite and liptinites as well as collotelinite, collodetrinite, and vitrodetrinite particles. Moreover, CFA is found to be composed of various organic and inorganic particles. By virtue of multiple characterizations, it has been utilized in several applications for decades, which is still quite limited. Therefore, current study aim to provide helpful insights into the potential use of CFA-derived products in different ways to increase sustainability.

Environmental geochemistry of higher radioactivity in a transboundary Himalayan river sediment (Brahmaputra, Bangladesh): potential radiation exposure and health risks

This study of a downstream segment (Brahmaputra, Bangladesh) of one of the longest transboundary (China-India-Bangladesh) Himalayan rivers reveals elevated radioactivity compared to other freshwater basins across the world. Naturally occurring radioactive nuclides (²²⁶Ra, ²³²Th, and ⁴⁰K) and metal contents (transition metals, Fe, Ti, Sc, and V; rare earth elements, La, Ce, Eu, Sm, Dy, Yb, and Lu; high field strength elements, Ta and Hf; and actinides, Th and U) in thirty sediment samples were measured by HPGe γ-spectrophotometry and research reactor-based neutron activation analysis, respectively. We systematically investigated the mechanism of the deposition of higher radioactivity concentrations and rare earth elements (REEs) associated with heavy minerals (HMs) and photomicrograph-based mineralogical analysis. The results show that total REEs (∑REE) and Ta, Hf, U, and Th are generally 1.5- to 3.0-fold elevated compared to crustal values associated with -δEu and -δCe anomalies, suggesting a felsic source provenance. The enrichment of light REEs (×1.5 upper continental crust (UCC)) and Th (×1.9 UCC), besides Th/U (=7.74 ± 2.35) and ²³²Th/⁴⁰K ratios, along with the micrographic and statistical approaches, revealed the elevated presence of HMs. Fluvial suspended sedimentary transportation (from upstream) followed by mineralogical recycling and sorting enriched the HM depositions in this basin. Bivariate plots, including La/Th-Hf, La/Th-Th/Yb, and La/V-Th/Yb, revealed significant contributions of felsic source rock compared to mafic sources. The assessment of radiological hazards demonstrates ionizing-radiation-associated health risks to the local residents and people inhabiting houses made from Brahmaputra River sediments (as construction material).

Chemometric approach in environmental pollution analysis: A critical review

With the ever-increasing global population and industrialization, it has become a call of the hour to start taking care of the environment to balance the ecosystem. For this, effective monitoring and assessment are required, which involves collecting and measuring environmental details, temporal and spatial readings of environmental data, and parameters. However, assessment of the environment is very tedious as it includes monitoring target analytes, identifying their sources, and reporting, which invariably implies that detailed environmental monitoring would be an intricate and expensive process. The traditional protocols in environmental measures are often manual and time demanding, which makes it further difficult. Moreover, several changes also occur within the environment, which could be chemical, physical, or biological, and since these environmental impacts are often cumulative, it becomes difficult to measure an isolated system. Furthermore, the chances of skipping significant results and trends become high. Also, experimental data obtained from the environmental analysis are usually non-linear and multi-variant due to different associations among various contributing variables. Therefore, it is implied that accurate measurements and environment monitoring are not using traditional analytical protocols. Thus, the need for a chemometric approach in environmental pollution analysis becomes paramount due to the inherent limitations associated with the conventional approach of analyzing environmental datasets. Chemometrics has appeared as a potential technique, which enhances the particulars of the chemical datasets by using statistical and mathematical analysis methods to analyze chemical data beyond univariate analysis. Utilizing chemometrics to study the environmental data is a revolutionary idea as it helps identify the relationship between sources of contaminations, environmental drivers, and their impact on the environment. Hence, this review critically explores the concept of chemometrics and its application in environmental pollution analysis by briefly highlighting the idea of chemometrics, its types, applications, advantages, and limitations in the environmental domain. An attempt is also made to present future trends in applications of chemometrics in environmental pollution analysis.

Road dust-driven elemental distribution in megacity Dhaka, Bangladesh: environmental, ecological, and human health risks assessment

Road dust, which reflects ambient air quality, receives various pollutants including toxic metal(oid)s from several natural and/or anthropogenic sources. This manuscript reports a comprehensive evaluation of the levels of seventeen metal(oid)s in road dust of a megacity (Dhaka, Bangladesh). Different evaluation approaches were implemented including statistical analysis and GIS mapping, besides environmental, ecological, and human health risk indices. From 30 sampling sites, representative samples were collected, which were analyzed by neutron activation analysis. The average concentrations (± SD) of Na, Mg, Al, Sc, Ti, V, Cr, Mn, Fe, Co, Zn, As, Rb, Sb, Cs, Ba, and W were 11,738 ± 560 µg g^-1, 12,410 ± 1249 µg g^-1, 62,127 ± 5937 µg g^-1, 8.89 ± 0.47 µg g^-1, 5224 ± 1244 µg g^-1, 66 ± 8 µg g^-1, 66.7 ± 6.9 µg g^-1, 547 ± 110 µg g^-1, 25,150 ± 1723 µg g^-1, 8.39 ± 0.65 µg g^-1, 125 ± 17 µg g^-1, 3.63 ± 0.56 µg g^-1, 87 ± 9 µg g^-1, 0.75 ± 0.28 µg g^-1, 4.40 ± 0.48 µg g^-1, 397 ± 87 µg g^-1, and 3.82 ± 1.77 µg g^-1, respectively. The distance-based redundancy analysis showed that the northern region was enriched with Na, Mn, Al, Fe, Zn, and Rb, while the southern region was enriched with Fe, Al, Ti, Cr, and Mg. The GIS mapping shows hot spots of Sc, Cr, Zn, and Cs were observed mostly in heavy traffic areas. Significant positive correlations of Fe-Sc, Al-Mg, V-Mg, V-Al, Cs-Rb, Cs-Sc, Rb-Sc, As-Na, and Cs-Rb invoked their inter-dependency and persistence in road dust. Depending on a set of environmental and ecological index-based calculation, the degree of metal(oid) pollution followed the descending order as W > Sb > Zn > Cr > As > Ti > Sc > V, while no pollution was recorded by Mn, Fe, Al, Rb, Cs, Co, and Ba. Importantly, the total hazard index values for adults and children were higher than unity, indicating potential non-carcinogenic health risks from exposure of road dust. Furthermore, the total carcinogenic risks from Cr and As through ingestion and dermal contact exceeded the standard guideline values. The implementation of different evaluation approaches strengthens the findings of metal(oid) source apportionment.

Assessment of Natural Radionuclide Distribution Pattern and Radiological Risk from Rocks in Precambrian Oban Massif, Southeastern Nigeria

A gamma spectrometric analysis of rock samples collected from the Precambrian Oban Massif, southeastern Nigeria, was performed to determine some primordial radioelements’ activity concentrations: U-238, Th-232, and K-40, and their associated radiological hazards. The mean activity of the primordial radionuclides was determined to be 1073.06 ± 0.65, 160.74 ± 1.32, and 250.76 ± 0.91 Bq·kg−1 for 40K, 238U, and 232Th, respectively, showing that they are inhomogeneously distributed, with activity changing with the rock type and location. The activity concentrations are highest in biotite garnet schist, quartz diorite, and biotite gneiss rock domains. The mean values of the radiological hazards are 0.08 Bq·kg−1 (alpha index), 2.15 Bq·kg−1(gamma index), 2.06 Bq·kg−1(internal) and 1.63 Bq·kg−1 (external4.30 Bq·kg−1(representative level index6), 602.23 Bq·kg−1, (radium equivalent), 780 nGy·h−1 (total absorbed dose rate), 270.91 nGy·h−1 (indoor), 509.78 nGy·h−1 (outdoor), 624.99, 1329.07 and 1954.06 mSv·yr−1 (outdoor, indoor and total annual effective dose equivalent, respectively), 6448.40 (cumulative excess lifetime cancer risk) and 248.94–3761.47 Bq·kg−1 (annual gonadal dose equivalent). These results are higher than their various permissible limits (except at Ako Community) and suggest that rocks in the area may be unsuitable for constructing dwelling places. It is strongly advised that basic safety standards and precautionary measures recommended by the European Commission should be strictly adhered to while dealing with these rocks.

Soil mineral analysis and environmental radioactivity in Ghizer, Eastern Hindukush, Pakistan

Distribution of natural and anthropogenic radionuclides (226Ra, 232Th, 137Cs and 40K) was determined in 32 samples from Ghizer, an Eastern Hindukush district at an altitude of 2286 m in Pakistan using high resolution gamma-ray spectrometry. Mineralogical analysis by X-ray diffractometry identified quartz, calcite, albite and anorthite as major phases whereas actinolite, chlorite serpentine and kaolinite as minor phases. The activity concentrations for 226Ra, 232Th, 137Cs and 40K varied from 25.2 ± 1.7 to 145.3 ± 10.1 Bq kg−1, 24.9 ± 1.1 to 197 ± 9 Bq kg−1, 2.03 ± 0.21 to 16.7 ± 1.1 and 252 ± 6 to 1433 ± 35 Bq kg−1, respectively. The samples yielded average radium equivalent activity as 178.4 ± 23.3 Bq kg−1. The majority of the samples revealed external hazard index and representative level index less than one. The average air absorbed dose rate was 91.2 ± 13.6 nGy h−1 corresponding to the annual effective dose rate 111.8 ± 17.4 μSv y−1. These values were higher than the world averages for air absorbed dose rate and outdoor annual effective dose rate. Principal component analysis was applied to obtain distribution pattern within the samples and among the radionuclides.

Potentially toxic elements in street dust from an urban city of a developing country: ecological and probabilistic health risks assessment

Anthropogenic activities in and around the urban highways followed by aerodynamic processing generate street dusts, which can cause adverse health effects through different exposure pathways. Hence, considering the high degree of industrialization, concomitant unplanned urbanization, and rapid demographic augmentation, street dust samples from an urban city (Gazipur, Bangladesh) were investigated in terms of potentially toxic elements (using ICP-MS) to evaluate their ecological and health risks. Mean concentrations (± SD) of lead (Pb), copper (Cu), chromium (Cr), cadmium (Cd), zinc (Zn), nickel (Ni), and arsenic (As) in the analyzed air-dried samples were 40.9 ± 13.6, 44.9 ± 15.4, 83.3 ± 19.0, 9.1 ± 5.4, 239.1 ± 34.7, 33.5 ± 10.4, and 2.1 ± 0.8 mg/kg, respectively with heterogeneous distribution which were 0.2 (As) to 82.7 (Cd) times higher than the available internationally recommended limits. Element-specific environmental indices revealed that contamination levels followed the descending order as Cd > Zn > Cu > Pb > Cr > Ni > As, whereas individual ecological risks followed the descending order as Cd > Cu > Pb > Ni > Zn > Cr > As. Sampling site-specific composite indices indicated that sampling sites with high loadings of traffic, population, industrialization, and urbanization were mostly polluted. Multivariate statistical approaches also deduced the similar origins of the studied elements. In terms of the investigated elements, the study site possessed high potential ecological risks, although non-carcinogenic and carcinogenic risks through different pathway's exposures seem insignificant, where children are more vulnerable than adults.

Basic Characteristics of Coal Gangue in a Small-Scale Mining Site and Risk Assessment of Radioactive Elements for the Surrounding Soils

The accumulation/improper treatment of coal gangue will not only lead to waste of land, but also cause environmental pollution. Especially the impact of radioactive elements on the surrounding ecological environment is widely concerned by many scholars. In this study, the concentration of radioactive elements (uranium (U) and thorium (Th)) of small-scale coal gangue mining site and surrounding soil in the northern region of Xieqiao coal mine were tested, the material composition of coal gangue was analyzed via XRF and XRD, the modes of occurrence of U and Th elements were investigated, and their potential ecological risks and ecological effectiveness were evaluated. The results show that the clay minerals with high content in coal gangue are the key minerals for the adsorption of uranium and thorium in coal gangue. The specific activity of two radioactive elements (U and Th) in soil is much lower than that of coal gangue. With the increase of the distance from the soil collection point to the gangue piles and the depth of the soil profile, the specific activities of the two radioactive elements decrease gradually. On the basis of the concentration curve, the range of the radioactive contamination halo of gangue piles is limited (≤30 m), speculating qualitatively that the gangue dump has no significant influence on the radioactivity of the surrounding water. The modes of occurrence of U and Th in coal gangue and soil are altered. According to the index of geo-accumulation, Th is easier to accumulate in soil environment, but Th and U pollution in soil is not obvious. In contrast to U element, the active state of Th element in soil is generally affected by exogenous (coal gangue) export, which may have a potential environmental effects. This study provides a research idea for the investigation of radioactive element pollution to the surrounding soil in small-scale coal gangue plies.

Mechanism of elevated radioactivity in Teesta river basin from Bangladesh: Radiochemical characterization, provenance and associated hazards

This work presents a river basin (Teesta River, Bangladesh) which possesses significantly higher radioactivity compared to other freshwater basins around the globe. A total of thirty sediment samples were collected to determine the naturally occurring radionuclides (²²⁶Ra, ²³²Th, and ⁴ K)and elemental abundances using the HPGe gamma spectrometry and instrumental neutron activation analysis (INAA), respectively. To understand the provenance of higher radioactivity, the compositional elements (Sc, Ti, V, Fe, La, Ce, Sm, Eu, Dy, Yb, Lu, Hf, Ta, Th, and U) of heavy minerals are thoroughly studied, where ∑REEs (rare earth elements), Hf, Ta, Th, and U are ∼2 times higher than the crustal values with negative Ce and Eu anomalies. Mechanism to co-occurrence among radioactivity concentrations and REEs has been explored in this work. Enrichment of light rare earth elements ( × 2.01 UCC) and thorium ( × 2.8 UCC), and Th/U (=5.54 ± 1.05), ²³²Th/⁴ K ratio and statistical analyses demonstrate the presence of heavy minerals with monazite predominance. Accumulations of these minerals are most likely due to the fluvial suspended sediments transported by the hydrodynamic forces from up-stream. Elemental ratios including La/V, Th/Yb, Th/Sc, and Hf/Sc confirm the dominance of felsic-source over the mafic-components and the source of sediment has experienced major recycling and sorting during transportation. Evaluation of radiological risks invokes ionizing radiation related hazards to the local inhabitants and the householders residing in the buildings comprised with sandy river sediments. However, minute probability of REEs, Th, and U entrance to the human body through food chain can cause trivial health risks.

Quantifying Source Apportionment, Co-occurrence, and Ecotoxicological Risk of Metals from Upstream, Lower Midstream, and Downstream River Segments, Bangladesh

The positive matrix factorization (PMF) receptor model was used for the first time to quantify the source contributions to heavy metal pollution of sediment on a national basin scale in the upstream, midstream, and downstream rivers (Teesta and Kortoya-Shitalakkah and Meghna-Rupsha and Pasur) of Bangladesh. The metal contamination status, co-occurrence, and ecotoxicological risk were also investigated. Sediment samples were collected from 30 sites at a depth range of 0 to 20 cm for analysis of 9 metals using inductively coupled plasma-mass spectrometry. The mean concentrations of metals varied for upstream, lower midstream, and downstream river segments. The results showed that chromium (Cr) exhibited a strong significant co-occurrence network with other metals (e.g., manganese [Mn], iron [Fe], and nickel [Ni]). Monte Carlo simulation results of the geo-accumulation index (Igeo; 63.3%) and risk indices (48.5%) showed that cadmium (Cd) was the main contributor to sediment pollution. However, the cumulative probabilities of sediments being polluted by metals were ranked as "moderate to heavily polluted" (Igeo 46.6%; risk index 16.7%). Toxicity unit results revealed that zinc (Zn) and Cd were the key toxic contributors to sediments. The PMF model predicted metal concentrations and identified 4 potential sources. The agricultural source (factor 1) mostly contributed to copper (Cu; 78.9%) and arsenic (As; 62.8%); Ni (96.9%) and Mn (83.5%) exhibited industrial point sources (factor 2), with 2 hot spots in northwestern and southwestern regions. Cadmium (93.5%) had anthropogenic point sources (factor 3), and Fe (64.3%) and Cr (53.5%) had a mixed source (factor 4). Spatially, similar patterns between PMF apportioning factors and predicted metal sources were identified, showing the efficiency of the model for river systems analysis. The degree of metal contamination in the river segments suggests an alarming condition for biotic components of the ecosystem. Environ Toxicol Chem 2020;39:2041-2054. © 2020 SETAC.

Chemical and physicochemical characterization of effluents from the tanning and textile industries in Bangladesh with multivariate statistical approach

Industrial effluents are one of the foremost concerns relating to the anthropogenic environmental pollution. The effluents from the tanning and textile industries in Dhaka, Bangladesh, were characterized chemically and physicochemically with multivariate statistical techniques. The concentrations of heavy metals viz., Pb, Cd, Cr, Mn, Fe, Ni, Cu, and Zn were determined by atomic absorption spectrometer while concentrations of anions viz., F^-, Cl^-, NO₂^-, NO₃^-, and SO₄^2- were measured by ion chromatograph. The physicochemical parameters viz., temperature, pH, electrical conductivity (EC), salinity, turbidity, dissolved oxygen (DO), and biological oxygen demand (BOD) were measured by a multiparameter meter while total suspended solids (TSS) and total dissolved solids (TDS) were measured gravimetrically. This study showed that effluents from both industries demonstrated high levels of TSS, TDS, EC, and heavy metals. Tannery effluents have lower pH and DO, and higher BOD, Cl^-, SO₄^2-, and Cr concentrations while textile dyeing effluents have higher pH, NO₂^-, and NO₃^- concentrations, compared to the standard limits promulgated by the Bangladesh government. Multivariate statistical techniques such as cluster analysis and principal component analysis along with the correlation matrices showed significant association among the measured parameters and identified pollution sources as well as effluent types in the study area which could be linked to the processes used in textile dying and tanning industries. This study will be useful for identifying pollutants emanating from the two industries and will guide future industrial aquatic studies where multiple industrial runoffs are concerned.

Evaluation of agricultural soil radiotoxic element pollution around a lignite-burning thermal power plant

Lignite coal is a major and an essential domestic energy source in Turkey. Many environmental problems and human health hazards may arise during lignite coal exploitation, combustion, and waste (fly and bottom ash and slag) disposal. In addition, lignite-burning power plants can be significant contributors to deposition of radiotoxic elements and/or toxic heavy metals on soil and water. The concentrations of thorium (Th) and uranium (U) in a 140 agricultural soil samples collected from the vicinity of a lignite-burning thermal power plant (LBTPP), located in Kangal district of Sivas province in the Central Anatolia region of Turkey, were determined using energy dispersive X-ray fluorescence spectroscopy. The concentrations of Th and U varied from 2.9 to 12.7 μg g−1 with an average value of 5.8 μg g−1 and 0.3–12.3 μg g−1 with an average value of 1.5 μg g−1, respectively. The radiotoxic elements pollution in agricultural soils was evaluated using pollution indices such as geo-accumulation index (I geo), enrichment factors (E F ), pollution index (P I ) and Nemerow integrated pollution index (NIP I ). The average value of I geo, E F and P I estimated for Th and U were found as −1.8, 1.2 and 0.44 and −1.7, 1.7 and 0.58, respectively. The results indicated that the soils around Kangal LBTPP were practically unpolluted to low polluted with Th and U. The NIP I values varied from 0.3 to 4.0 with an average value of 0.6. The evaluation result of NIP I revealed that 86 % of total soil samples were non-polluted.

Assessment of natural radioactivity in coals and coal combustion residues from a coal-based thermoelectric plant in Bangladesh: implications for radiological health hazards

To study the level of radioactivity concentrations from a coal-based power plant (Barapukuria, Bangladesh) and to estimate the associated radiological hazards, coal and associated combustion residuals from the power plant were analyzed by gamma-ray spectrometry with high-purity germanium (HPGe) detector. The results reveal that the mean radioactivity (Bq kg^-1) concentrations in feed coal samples are 66.5 ± 24.2, 41.7 ± 18.2, 62.5 ± 26.3, and 232.4 ± 227.2 for U-238, Ra-226, Th-232, and K-40, respectively, while in coal combustion residuals (CCRs), they are 206.3 ± 72.4, 140.5 ± 28.4, 201.7 ± 44.7, and 232.5 ± 43.8, respectively. With the exception of K-40, all the determined natural radionuclides are considerably higher in the investigated feed coal and associated combustion residues as compared with the world soil and world coal mean activities. On the average, CCRs contains 3.10-3.37 times more natural radionuclides than the feed coal, except for K-40. The radioactivity of fly ash and bottom ash is fractionated, and ratio ranges from 1.40 to 1.57. The mean values of the radiological hazard indices in the coal and their associated residuals are 153.1 and 446.8 Bq kg^-1 for radium equivalent activity, 0.41 and 1.21 for the external hazard index, 70 and 200.1 nGy h^-1 for the absorbed gamma dose rate, 0.09 and 0.25 mSv year^-1 for the annual effective dose rate, and 3.0 × 10^-4 and 8.6 × 10^-4 Sv^-1 for the excess lifetime cancer risk, respectively, most of which exceed the UNSCEAR-recommended respective threshold limits. The outcome of this study suggests a potential radiological threat to the environment as well as to the health of occupational workers and nearby inhabitants from the examined samples.