Reliability of Maximal Back Squat and Power Clean Performances in Inexperienced Athletes

Influence of short-term chronic oral cannabidiol application on muscle recovery and performance after an intensive training protocol - a randomized double-blind crossover study

BACKGROUND

Rapid regeneration after intense exercise is essential for competitive athletes. Based on this assumption, supplementation strategies, focusing on food supplements, are increasing to improve the recovery processes. One such supplement is cannabidiol (CBD) which is gaining more attention in competitive sports. However, the evidence is still lacking and there are no data available about the effect of a short-term chronic application.

METHODS

A three-arm double-blind cross-over study was conducted to determine the effects of two different CBD products on performance, muscle damage and inflammatory processes in well-trained athletes. In total 17 subjects took successfully part in this study. Each subject underwent the six-day, high-intensity training protocol three times. After each training session, each subject took either a placebo or a CBD product (60 mg of oil or solubilisate). Between the intervention phases, at least four weeks of washout period was conducted. Before and after the training protocols the performance capacity in countermovement jump (CMJ), back squat (BS), bench press (BP) and 1-mile run were measured and biomarkers for muscle damage (creatine kinase, myoglobin), inflammatory processes (interleukin 6 and 10) and immune cell activity (ratios of neutrophil granulocytes, lymphocytes and, platelets) were analyzed. For statistical analyses, the current version of R and a linear mixed model was used.

RESULTS

It could identify different effects of the training protocol depending on performance level (advanced or highly advanced athletes) (p < .05). Regardless of the performance level, muscle damage and a reduction in performance could be induced by the training protocol. Only CBD oil was associated with a reduction in myoglobin concentration (p < .05) in advanced athletes. Concerning immune activity, a significant decrease in platelets lymphocyte ratios was observed in advanced athletes after placebo treatment (p < .05). CBD oil application showed a slight inhibitory effect (p < .10). Moreover, the reduction in performance differs between the performance levels. A significant decrease in CMJ was observed in advanced athletes and a decreasing trend in BS was observed in highly advanced athletes after placebo treatment (p < 0.10). Both CBD products do not affect performance parameters. For inflammatory parameters, no effects were observed.

CONCLUSION

It was found that the performance level of the subjects was a decisive factor and that they responded differently to the training protocol and the CBD application. However, no clear effects of either CBD product were found and further research is needed to identify the long-term effects of CBD application.

Can the Velocity of a 1RM Hang Power Clean Be Used to Estimate a 1RM Hang High Pull?

ABSTRACT

Suchomel, TJ, Techmanski, BS, Kissick, CR, and Comfort, P. Can the velocity of a 1RM hang power clean be used to estimate a 1RM hang high pull? J Strength Cond Res 38(7): 1321-1325, 2024-The purpose of this study was to estimate the 1-repetition maximum hang high pull (1RM HHP) using the peak barbell velocity of a 1RM hang power clean (HPC). Fifteen resistance-trained men (age = 25.5 ± 4.5 years, body mass = 88.3 ± 15.4 kg, height = 176.1 ± 8.5 cm, relative 1RM HPC = 1.3 ± 0.2 kg·kg-1) with previous HPC experience participated in 2 testing sessions that included performing a 1RM HPC and HHP repetitions with 20, 40, 60, and 80% of their 1RM HPC. Peak barbell velocity was measured using a linear position transducer during the 1RM HPC and HHP repetitions performed at each load. The peak barbell velocity achieved during the 1RM HPC was determined as the criterion value for a 1RM performance. Subject-specific linear regression analyses were completed using slope-intercept equations created from the peak velocity of the 1RM HPC and the peak barbell velocities produced at each load during the HHP repetitions. The peak barbell velocity during the 1RM HPC was 1.74 ± 0.30 m·s-1. The average load-velocity profile showed that the estimated 1RM HHP of the subjects was 98.0 ± 19.3% of the 1RM HPC. Although a 1RM HHP value may be estimated using the peak barbell velocity during the HPC, strength and conditioning practitioners should avoid this method because of the considerable variation within the measurement. Additional research examining different methods of load prescription for weightlifting pulling derivatives is needed.

The dynamic strength index is a reliable and feasible tool to assess neuromuscular performance in male and female handball players

The aim of this study was to explore the reliability and feasibility of the isometric mid-thigh pull (IMTP) and dynamic strength index (DSI) in semi-professional handball players (seventeen male and eighteen female). A cross-sectional design was used to determine the test-retest reliability of several kinetic metrics registered with a force plates. The peak force, peak relative force, rate of force development (RFD 0-250 ms), and impulse 0-250 ms were selected from the IMTP test, whereas the peak propulsive force was chosen from the countermovement jump test to obtain the DSI. The intraclass correlation coefficient (ICC), coefficient of variation (CV), standard error of the measurement (SEM) and smallest detectable difference (SDD) were calculated. A paired sample t-test was also performed. No significant differences were found between the testing sessions for all variables, except for peak propulsive force for all players (p = 0.036) and DSI for female players (p = 0.037). Reliability for all kinetic metrics was good to excellent (ICC = 0.78-0.97), with low variability (CV ≤ 8.64%), being the SEM scores lower than SDD. In conclusion, the IMTP test and DSI are highly reliable and feasible tools for assessing neuromuscular performance in semi-professional handball players.

Validation of a Single-Session Protocol to Determine the Load-Velocity Profile and One-Repetition Maximum for the Back Squat Exercise

ABSTRACT

Gomes, M, Fitas, A, Santos, P, Pezarat-Correia, P, and Mendonca, GV. Validation of a single session protocol to determine the load-velocity profile and one-repetition maximum for the back squat exercise. J Strength Cond Res 38(6): 1013-1018, 2024-We investigated whether a single session of absolute incremental loading is valid to obtain the individual load-velocity profile (LVP) and 1 repetition maximum (1RM) for the free-weight parallel back squat. Twenty strength-trained male subjects completed 3 testing sessions, including a baseline 1RM session and 2 LVP sessions (LVP rel based on incremental relative loads and LVP abs based on absolute load increments until 1RM). The 1RM load was compared between the baseline and LVP abs . The load at zero velocity (load-axis intercept [L 0 ]), maximal velocity capacity (velocity-axis intercept [V 0 ]), slope, and area under the load-velocity relationship line (A line ) were compared between the LVP rel and LVP abs using equivalence testing through 2 one-sided t -tests. Measurement accuracy was calculated using the absolute percent error. The 1RM measured at baseline and LVP abs was equivalent and presented a low absolute percent error (1.2%). The following LVP parameters were equivalent between LVP rel and LVP abs : 1RM, L 0 , and A line because the mean difference between sessions was close to zero and the Bland-Altman limits of agreement (1RM:5.3 kg; L 0 :6.8 kg; A line : 9.5 kg·m -1 ·s -1 ) were contained within the a priori defined ± equivalent margins (5% for 1RM and L 0 and 10% for A line ). The aforementioned variables presented a low absolute percent error. However, slope and V 0 were not equivalent between sessions. In conclusion, a single session of absolute incremental loading is a valid approach to obtain the L 0 and A line of the individual LVP and 1RM, and can be used to efficiently track the magnitude of neuromuscular adaptations throughout the training cycles for the free-weight back squat.

The Relationship Between Isometric and Dynamic Strength Following Resistance Training: A Systematic Review, Meta-Analysis, and Level of Agreement

BACKGROUND

Maximal lower-body strength can be assessed both dynamically and isometrically; however, the relationship between the changes in these 2 forms of strength following resistance training is not well understood.

PURPOSE

To systematically review and analyze the effects of resistance training on changes in maximal dynamic (1-repetition-maximum back squat, deadlift, and power clean) and position-matched isometric strength (isometric midthigh pull and the isometric squat). In addition, individual-level data were used to quantify the agreement and relationship between changes in dynamic and isometric strength.

METHODS

Databases were systematically searched to identify eligible articles, and meta-analysis procedures were performed on the extracted data. The raw results from 4 studies were acquired, enabling bias and absolute reliability measures to be calculated using Bland-Altman test of agreement.

RESULTS

Eleven studies met the inclusion criteria, which resulted in 29 isometric-dynamic change comparisons. The overall pooled effect was 0.13 in favor of dynamic testing; however, the prediction interval ranged from g = -0.49 to 0.75. There was no evidence of bias (P = .825) between isometric and dynamic tests; however, the reliability coefficient was estimated to be 16%, and the coefficient of variation (%) was 109.27.

CONCLUSIONS

As a range of future effects can be expected when comparing isometric to dynamic strength changes following resistance training, and limited proportionality exists between changes in these 2 strength qualities, there is strong evidence that isometric and dynamic strength represent separate neuromuscular domains. These findings can be used to inform strength-assessment models in athlete populations.

Association Between Foundation Strength and Weightlifting Exercises in Highly Trained Weightlifters: Support for a General Strength Component

ABSTRACT

Zecchin, A, Puggina, EF, Hortobágyi, T, and Granacher, U. Association between foundation strength and weightlifting exercises in highly trained weightlifters: support for a general strength component. J Strength Cond Res 37(7): 1375-1381, 2023-In addition to specific weightlifting exercises (i.e., clean and jerk and snatch), foundation strength exercises (i.e., overhead press, front squat, and deadlift) constitute an integral part of the weightlifters' training regime. The unexamined concept behind this training plan is that foundation strength exercises are associated with clean and jerk and snatch performance, implying the existence of a general strength component. We thus determined the relationship between performance in foundation strength exercises (overhead press, front squat, and deadlift) and weightlifting exercises (clean and jerk and snatch) in weightlifters. Well-trained weightlifters ( N = 19, age: 26.8 ± 4.4 years; body mass index: 27.6 ± 2.3 kg·m -2 ; and training history: 4.6 ± 0.8 years) performed 1 repetition maximum tests (1RM) in foundation strength and weightlifting exercises, over 14 days, in a randomized order. We observed significant correlations in 1RM performance between the overhead press and snatch ( r = 0.69), front squat and snatch ( r = 0.73), overhead press and clean and jerk ( r = 0.67), and front squat and clean and jerk ( r = 0.72, all r values: p < 0.01). No significant correlations were found for 1RM performance between the snatch and deadlift or between the clean and jerk and deadlift ( r- range: 0.20-0.58; p > 0.05). Stepwise linear regression revealed that 1RM performance in the overhead press and front squat explained 62% of the variance in snatch 1RM performance ( F = 5.51; p < 0.04). Overhead press and front squat 1RM performance explained 59% of the variance in the clean and jerk 1RM performance ( F = 5.14; p < 0.04). Our results demonstrate the existence of a general strength component between selected foundation strength exercises and weightlifting performance. However, the use of the front squat and overhead press to increase 1RM performance in weightlifting exercises needs to be determined in future research using a different methodological approach (i.e., longitudinal protocols), given that the observed correlations do not necessarily imply causation.

The Effect of Complex Training on Physical Performance in Rugby League Players

PURPOSE

To compare the effects of variable-resistance complex training (VRCT) versus traditional complex training (TCT) on strength, power, speed, and leg stiffness (Kleg) in rugby league players during a 6-week mesocycle.

METHODS

Twenty-four rugby league players competing in the British University and Colleges Sport Premier North Division were randomized to VRCT (n = 8), TCT (n = 8), or control (CON; n = 8). Experimental groups completed a 6-week lower-body complex training intervention (2×/wk) that involved alternating high-load resistance exercise with plyometric exercise within the same session. The VRCT group performed resistance exercises at 70% of 1-repetition maximum (1RM) + 0% to 23% of 1RM from band resistance with a 90-second intracontrast rest interval, whereas the TCT group performed resistance exercise at 93% of 1RM with a 4-minute intracontrast rest interval. Back-squat 1RM, countermovement jump peak power, reactive strength index, sprint times, and Kleg were assessed pretraining and posttraining.

RESULTS

VRCT and TCT significantly improved 1RM back squat, countermovement jump peak power, and 5-m sprint time (all P < .05). VRCT also improved Kleg, whereas TCT improved 10- and 20-m sprint times (all P < .05). Between groups, both VRCT and TCT improved 1RM back squat compared with CON (both P < .001). Additionally, VRCT improved Kleg compared with CON (right leg: P = .016) and TCT improved 20-m sprint time compared with CON (P = .042).

CONCLUSIONS

VRCT and TCT can be implemented during the competitive season to improve strength, power, and 5-m sprint time. VRCT may lead to greater improvements in reactive strength index and Kleg, whereas TCT may enhance 10- and 20-m sprint times.

Narrative Review of Sex Differences in Muscle Strength, Endurance, Activation, Size, Fiber Type, and Strength Training Participation Rates, Preferences, Motivations, Injuries, and Neuromuscular Adaptations

ABSTRACT

Nuzzo, JL. Narrative review of sex differences in muscle strength, endurance, activation, size, fiber type, and strength training participation rates, preferences, motivations, injuries, and neuromuscular adaptations. J Strength Cond Res 37(2): 494-536, 2023-Biological sex and its relation with exercise participation and sports performance continue to be discussed. Here, the purpose was to inform such discussions by summarizing the literature on sex differences in numerous strength training-related variables and outcomes-muscle strength and endurance, muscle mass and size, muscle fiber type, muscle twitch forces, and voluntary activation; strength training participation rates, motivations, preferences, and practices; and injuries and changes in muscle size and strength with strength training. Male subjects become notably stronger than female subjects around age 15 years. In adults, sex differences in strength are more pronounced in upper-body than lower-body muscles and in concentric than eccentric contractions. Greater male than female strength is not because of higher voluntary activation but to greater muscle mass and type II fiber areas. Men participate in strength training more frequently than women. Men are motivated more by challenge, competition, social recognition, and a desire to increase muscle size and strength. Men also have greater preference for competitive, high-intensity, and upper-body exercise. Women are motivated more by improved attractiveness, muscle "toning," and body mass management. Women have greater preference for supervised and lower-body exercise. Intrasexual competition, mate selection, and the drive for muscularity are likely fundamental causes of exercise behaviors in men and women. Men and women increase muscle size and strength after weeks of strength training, but women experience greater relative strength improvements depending on age and muscle group. Men exhibit higher strength training injury rates. No sex difference exists in strength loss and muscle soreness after muscle-damaging exercise.

The relationship between driving distance and different types of contraction in core muscles in Korea elite female golfers

BACKGROUND

This study compared and examined the relationship between the concentric, eccentric, and isometric muscular contraction measurements that are commonly used to assess trunk strength and power, and the driving distance in elite female golfers. The purpose of this study was to utilize as a basis to evaluate the driving distance-related physical training program design and its efficacy.

METHODS

Eighteen female golfers from A club in Gyeonggi province are recruited. The driving distance, medicine ball throwing, isokinetic trunk flexor, and extensor strength and power, and isometric strength in the 3D electromagnetic motion analysis system were assessed. The statistical analysis adopted the Students' t-test to adjust the different units in each assessment method, and then interrelation and correlation analysis between the driving distance was conducted.

RESULTS

The result of this study is as the following: the medicine ball throwing, isokinetic trunk extensor power, isometric trunk flexor, and extensor strength, and left and right flexor and rotator strength showed high correlation with the driving distance. In the comparison between strength factors, isokinetic trunk extensor strength had a high correlation (R²=0.452), while the medicine ball throw and isokinetic trunk extensor power were reported a higher correlation in order (R²=0.740). In the overall comparison analysis, the isometric trunk left rotation, and isometric trunk extensor had an R² value of 0.893.

CONCLUSIONS

Consequently, the isometric trunk rotational strength and extensor strength had the highest correlation with the driving distance. This result can be used to design the physical fitness program for golfers.

Reliability of kettlebell swing one and five repetition maximum

Background

Research into the kettlebell swing has increased in the last decade. There has been a paucity of literature assessing an individual's ability to perform the kettlebell swing exercise. The purpose of this study was to determine the test-retest reliability of the one and five repetition maximum (1RM and 5RM) kettlebell swing.

Materials & Methods

Twenty four recreational resistance-trained participants performed an isometric mid-thigh pull (IMTP) and two familiarization sessions followed by three test sessions for each RM load approximately one week apart, using a custom-built plate-loaded kettlebell. On each test occasion, subjects completed a series of warm-up sets followed by 3-4 progressively heavier kettlebell swings to a standardized height until 1RM or 5RM was reached. Test-retest reliability was calculated using the intra-class correlation (ICC) and typical error was represented as the coefficient of variation (CV%) with 90% confidence limits (90% CL). The smallest worthwhile change (SWC%) representing the smallest change of practical importance, was calculated as 0.2 × between-subject standard deviation. The relationship of kettlebell swing performance and maximum strength was determined by Pearson correlation with ±90% CL between the absolute peak force recorded during IMTP and 1RM or 5RM.

Results

Results demonstrated a high test-retest reliability for both the 1RM (ICC = 0.97, 90% CL [0.95-0.99]; CV = 2.7%, 90% CL [2.2-3.7%]) and 5RM (ICC = 0.98, 90% CL [0.96-0.99]; CV = 2.4%, 90% CL [1.9-3.3%]), respectively. The CV% was lower than the SWC for both the 1RM (SWC = 2.8%, 90% CL [1.9-3.5]) and 5RM (SWC = 2.9%, 90% CL [1.9-3.6]) kettlebell swing. The correlation between IMTP absolute peak force and the 1RM (r = 0.69, 90% CL 0.43-0.83) was large and very large for the 5RM (r = 0.75, 90% CL [0.55-0.87]).

Conclusions

These results demonstrate the stability of 1RM and 5RM kettlebell swing performance after two familiarization sessions. Practitioners can be confident that changes in kettlebell swing 1RM and 5RM performance of >3.6 kg represent a practically important difference, which is the upper limit of the 90% CL.

How Does Lower-Body and Upper-Body Strength Relate to Maximum Split Jerk Performance?

ABSTRACT

Soriano, MA, Jiménez-Ormeño, E, Amaro-Gahete, FJ, Haff, GG, and Comfort, P. How does lower-body and upper-body strength relate to maximum split jerk performance? J Strength Cond Res 36(8): 2102-2107, 2022-The aims of this study were to (I) determine the relationships between the maximum dynamic strength of the upper and lower body, measured by overhead press and back squat 1 repetition maximum (1RM) performances, and the split jerk (SJ) performance in trained weightlifters and (II) explore the magnitude of these relationships for men and women to establish sex-specific prediction equations. Twenty men (age: 28.9 ± 6.6 years; height: 1.8 ± 0.1 m; body mass [BM]: 82.5 ± 10.2 kg; weightlifting training experience: 4.2 ± 2.4 years) and 13 women (age: 27.7 ± 4.4 years; height: 1.7 ± 0.1 m; BM: 61.8 ± 5.2 kg; weightlifting training experience: 2.7 ± 1.7 years) competitive weightlifters participated. The 1RM performances of the overhead press, back squat, and SJ were assessed for all subjects. A very strong correlation exists between the back squat and overhead press, with maximum SJ performance for all subjects (r = 0.97; p < 0.001). Similarly, very strong correlations were found for men (r = 0.90, p < 0.001) and women (r = 0.90, p = 0.0002), separately. The coefficient of determination indicates that the prediction equation for the maximum SJ performance is quite accurate (R2 = 0.94) for all subjects and men (R2 = 0.83) and women (R2 = 0.81), separately. These results provide evidence that the maximum strength of the upper and lower body are major contributors to SJ performance. In addition, SJ performance can accurately be predicted from the back squat and overhead press performances.

Improved power clean performance with the hook-grip is not due to altered force-time or horizontal bar-path characteristics

he underlying biomechanical benefits of hook-grip (HG) over conventional closed-grip (CG) remain unclear. This study compared bar-path kinematics and force-time variables of the power clean (PC) performed with HG or CG. We also aimed to compared kinetic changes measured by force platform versus linear position transducer (LPT). Eleven well-trained men volunteered. Following a familiarisation session, HG, and CG 1RM conditions, were randomly completed seven days apart. System kinetics and barbell kinematics were recorded via synchronized force platform+LPT system and two-dimensional motion-capture. Statistical parametric mapping (SPM), analysis of variance, and standardised differences were utilised. The SPM cut-offs were determined via novel combination of force and displacement. No between-condition differences in normalised force-time variables of the pull or catch were detected. The first and second pull duration was similar between conditions (ES = 0.04-0.38). Conversely, catch and total PC durations were shorter at 80-95% (ES = 0.26-0.75), with the weightless phase more prolonged at 95% and 100% (ES = 0.54-0.76) with HG compared to CG. Improved timing of the turnover and catch phases appears to be the primary difference between HG and CG performance. Thus, grip type is possibly irrelevant to non-weightlifting athletes when performing submaximal catch-less derivatives..

Intermuscular Coordination in the Power Clean Exercise: Comparison between Olympic Weightlifters and Untrained Individuals-A Preliminary Study

Muscle coordination in human movement has been assessed through muscle synergy analysis. In sports science, this procedure has been mainly applied to the comparison between highly trained and unexperienced participants. However, the lack of knowledge regarding strength training exercises led us to study the differences in neural strategies to perform the power clean between weightlifters and untrained individuals. Synergies were extracted from electromyograms of 16 muscles of ten unexperienced participants and seven weightlifters. To evaluate differences, we determined the pairwise correlations for the synergy components and electromyographic profiles. While the shape of activation patterns presented strong correlations across participants of each group, the weightings of each muscle were more variable. The three extracted synergies were shifted in time with the unexperienced group anticipating synergy #1 (−2.46 ± 18.7%; p < 0.001) and #2 (−4.60 ± 5.71%; p < 0.001) and delaying synergy #3 (1.86 ± 17.39%; p = 0.01). Moreover, muscle vectors presented more inter-group variability, changing the composition of synergy #1 and #3. These results may indicate an adaptation in intermuscular coordination with training, and athletes in an initial phase of training should attempt to delay the hip extension (synergy #1), as well as the upper-limb flexion (synergy #2).

Pooled Versus Individualized Load-Velocity Profiling in the Free-Weight Back Squat and Power Clean

PURPOSE

This study compared pooled against individualized load-velocity profiles (LVPs) in the free-weight back squat and power clean.

METHODS

A total of 10 competitive weightlifters completed baseline 1-repetition maximum assessments in the back squat and power clean. Three incremental LVPs were completed, separated by 48 to 72 hours. Mean and peak velocity were measured via a linear-position transducer (GymAware). Linear and nonlinear (second-order polynomial) regression models were applied to all pooled and individualized LVP data. A combination of coefficient of variation (CV), intraclass correlation coefficient, typical error of measurement, and limits of agreement assessed between-subject variability and within-subject reliability. Acceptable reliability was defined a priori as intraclass correlation coefficient > .7 and CV < 10%.

RESULTS

Very high to practically perfect inverse relationships were evident in the back squat (r = .83-.96) and power clean (r = .83-.89) for both regression models; however, stronger correlations were observed in the individualized LVPs for both exercises (r = .85-.99). Between-subject variability was moderate to large across all relative loads in the back squat (CV = 8.2%-27.8%) but smaller in the power clean (CV = 4.6%-8.5%). The power clean met our criteria for acceptable reliability across all relative loads; however, the back squat revealed large CVs in loads ≥90% of 1-repetition maximum (13.1%-20.5%).

CONCLUSIONS

Evidently, load-velocity characteristics are highly individualized, with acceptable levels of reliability observed in the power clean but not in the back squat (≥90% of 1-repetition maximum). If practitioners want to adopt load-velocity profiling as part of their testing and monitoring procedures, an individualized LVP should be utilized over pooled LVPs.

Velocity Change Estimation by Subjective Measures Over a Wide-Load Spectrum in Squat and Bench Press

ABSTRACT

Chapman, M, Larumbe-Zabala, E, Triplett, NT, and Naclerio, F. Velocity change estimation by subjective measures over a wide-load spectrum in squat and bench press. J Strength Cond Res 35(2S): S51-S56, 2021-This study compared whether the perception of effort measured on a repetition-by-repetition basis during continuous sets to failure is different between squat (SQ) and bench press (BP). After determining the one repetition maximum (1RM) value in both SQ and BP, 18 subjects (28.2 ± 5 years, 50% women) performed 7 sets to failure per exercise, separated by 24-48 hours, alternating SQ and BP, using the following relative load ranges: 30 < 40%, 40 < 50%, 50 < 60%, 60% < 70%, 70 < 80%, 80 < 90%, and >90%. The mean accelerative velocity (MAV) and rating of perceived exertion (RPE) using the OMNI-RES (0-10) scale were measured for every repetition of each set. The ability of the OMNI-RES (0-10) scale to identify velocity changes during continuous sets to volitional failure and to distinguish loading zones divided into 10% slots, from 30 to 100% of 1RM was confirmed for both SQ and BP. The RPE values measured at (a) the first repetition; (b) the repetition where MAV peaks; (c) the repetition where MAV drops by ≤10% compared the maximum and (d) the last repetition, showed no differences (p > 0.05, d < 0.2) between exercises. In conclusion, the same RPE scores can be applied to both exercises, for either estimating the relative load or monitoring changes in MAV during continuous sets to failure.

Muscle Synergies Reliability in the Power Clean Exercise

Muscle synergy extraction has been utilized to investigate muscle coordination in human movement, namely in sports. The reliability of the method has been proposed, although it has not been assessed previously during a complex sportive task. Therefore, the aim of the study was to evaluate intra- and inter-day reliability of a strength training complex task, the power clean, assessing participants' variability in the task across sets and days. Twelve unexperienced participants performed four sets of power cleans in two test days after strength tests, and muscle synergies were extracted from electromyography (EMG) data of 16 muscles. Three muscle synergies accounted for almost 90% of variance accounted for (VAF) across sets and days. Intra-day VAF, muscle synergy vectors, synergy activation coefficients and individual EMG profiles showed high similarity values. Inter-day muscle synergy vectors had moderate similarity, while the variables regarding temporal activation were still strongly related. The present findings revealed that the muscle synergies extracted during the power clean remained stable across sets and days in unexperienced participants. Thus, the mathematical procedure for the extraction of muscle synergies through nonnegative matrix factorization (NMF) may be considered a reliable method to study muscle coordination adaptations from muscle strength programs.

Prediction of muscle fiber composition using multiple repetition testing

Direct determination of muscle fiber composition is invasive and expensive, with indirect methods also requiring specialist resources and expertise. Performing resistance exercises at 80% 1RM is suggested as a means of indirectly estimating muscle fiber composition, though this hypothesis has never been validated against a direct method. The aim of the study was to investigate the relationship between the number of completed repetitions at 80% 1RM of back squat exercise and muscle fiber composition. Thirty recreationally active participants’ (10 females, 20 males) 1RM back squat load was determined, before the number of consecutive repetitions at 80% 1RM was recorded. The relationship between the number of repetitions and the percentage of fast-twitch fibers from vastus lateralis was investigated. The number of completed repetitions ranged from 5 to 15 and was independent of sex, age, 1RM, training frequency, training type, training experience, BMI or muscle fiber cross-sectional area. The percentage of fast-twitch muscle fibers was inversely correlated with the number of repetitions completed (r = –0.38, P = 0.039). Participants achieving 5 to 8 repetitions (n = 10) had significantly more fast-twitch muscle fibers (57.5 ± 9.5 vs 44.4 ± 11.9%, P = 0.013) than those achieving 11–15 repetitions (n = 11). The remaining participants achieved 9 or 10 repetitions (n = 9) and on average had equal proportion of fast- and slow-twitch muscle fibers. In conclusion, the number of completed repetitions at 80% of 1RM is moderately correlated with muscle fiber composition.

A 2-year longitudinal follow-up of performance characteristics in Chinese male elite youth athletes from swimming and racket sports

Training in elite sport aims at the optimization of the athletic performance, and to control the athletes`progress in physiological, anthropometrical and motor performance prerequisites. However, in most sports, the value of longitudinal testing is unclear. This study evaluates the longitudinal development and the influence of intense training over 2-years on specific physiological performance prerequisites, as well as certain body dimensions and motor abilities in elite youth athletes. Recruited between 11-13 years of age at Shanghai Elite Sport school, the sample of student-athletes (N = 21) was categorized as the swimming group (10 athletes), and the racket sports group (11 players: 7 table tennis and 4 badminton players). The performance monitoring took place over two years between September 2016 and September 2018 and included 5 test waves. In all the test waves, the athletes were assessed by means of three physiological measurements (vital capacity, hemoglobin concentration, heart rate at rest), three anthropometric parameters (body height, body weight, chest girth), and two motor tests (back strength, complex reaction speed). Seven out of eight diagnostic methods exhibit medium to high validity to discriminate between the different levels of performance development in the two sports groups. The investigated development of the performance characteristics is attributed partly to the inherited athletic disposition as well as to the different sport-specific training regimens of the two sports groups.

Using Velocity to Predict the Maximum Dynamic Strength in the Power Clean

The primary aim of the present study was to examine the commonly performed training exercise for athlete preparation. Twenty-two recreationally trained males (age: 26.3 ± 4.1 y, height: 1.80 ± 0.07 m; body mass (BM): 87.01 ± 13.75 kg, 1-repetitoon maximum(1-RM)/BM: 0.90 ± 0.19 kg) participated in the present study. All subjects had their 1-RM power clean tested with standard procedures. On a separate testing day, subjects performed three repetitions at 30% and 45%, and two repetitions at 70% and 80% of their 1-RM power clean. During all trials during both sessions, peak velocity (PV) and mean velocity (MV) were measured with the use of a GymAware device. There were no significant differences between the actual and estimated 1-RM power clean (p = 0.37, ES = −0.11) when the load-PV profile was utilized. There was a large typical error (TE) present for the load-PV- and load-MV-estimated 1-RM values. Additionally, the raw TE exceeded the smallest worthwhile change for both load-PV and load-MV profile results. Based upon the results of this study, the load-velocity profile is not an acceptable tool for monitoring power clean strength.

Does Sex Impact the Differences and Relationships in the One Repetition Maximum Performance Across Weightlifting Overhead Pressing Exercises?

Soriano, MA, García-Ramos, A, Calderbank, J, Marín, PJ, Sainz de Baranda, P, and Comfort, P. Does sex impact the differences and relationships in the one repetition maximum performance across weightlifting overhead pressing exercises? J Strength Cond XX(X): 000-000, 2020-This study aimed to determine the impact of sex on the differences and relationships of the one repetition maximum (1RM) performance between 3 overhead pressing exercises (push press [PP], push jerk [PJ] and split jerk [SJ]). 15 men (body mass [BM]: 82.3 ± 9.9 kg; weightlifting training experience: 2.6 ± 1.6 years) and 15 women (BM: 64.4 ± 7.0 kg; weightlifting training experience: 2.2 ± 1.4 years) participated in this study. A ratio-scaled (1RM·BM) was used for the comparison between them. The 1RM of the 3 exercises were evaluated within the same testing session using a combined 1RM assessment method. The interaction effect of exercise and sex did not reach statistical significance (p = 0.671; η = 0.001). In contrast, there were significant main effects of exercise (p ≤ 0.01) and sex (p < 0.001) with medium (η = 0.096) and large effect sizes (η = 0.306), respectively. A similar main effect of exercise was reported for both men (PP [1.0 ± 0.1 kg·kg] < PJ [1.1 ± 0.2 kg·kg] ∼ SJ [1.2 ± 0.2 kg·kg]) and women (PP [0.8 ± 0.1 kg·kg] < PJ [0.9 ± 0.2 kg·kg] ∼ SJ [0.9 ± 0.2 kg·kg]). The 1RM performance of the 3 exercises was significantly correlated for men (r [range] = 0.856-0.963) and women (r [range] = 0.636-0.925). Sex does not affect the differences in the 1RM performance across weightlifting overhead pressing exercises. However, stronger correlations and lower variation in the 1RM performance during the PP, PJ, and SJ are expected for men compared with women.

Test-Retest Reliability of the One-Repetition Maximum (1RM) Strength Assessment: a Systematic Review

Background

The test–retest reliability of the one-repetition maximum (1RM) test varies across different studies. Given the inconsistent findings, it is unclear what the true reliability of the 1RM test is, and to what extent it is affected by measurement-related factors, such as exercise selection for the test, the number of familiarization trials and resistance training experience.

Objectives

The aim of this paper was to review studies that investigated the reliability of the 1RM test of muscular strength and summarize their findings.

Methods

The PRISMA guidelines were followed for this systematic review. Searches for studies were conducted through eight databases. Studies that investigated test–retest reliability of the 1RM test and presented intra-class correlation coefficient (ICC) and/or coefficient of variation (CV) were included. The COSMIN checklist was used for the assessment of the methodological quality of the included studies.

Results

After reviewing 1024 search records, 32 studies (pooled n = 1595) on test–retest reliability of 1RM assessment were found. All the studies were of moderate or excellent methodological quality. Test–retest ICCs ranged from 0.64 to 0.99 (median ICC = 0.97), where 92% of ICCs were ≥ 0.90, and 97% of ICCs were ≥ 0.80. The CVs ranged from 0.5 to 12.1% (median CV = 4.2%). ICCs were generally high (≥ 0.90), and most CVs were low (< 10%) for 1RM tests: (1) among those without and for those with some resistance training experience, (2) conducted with or without familiarization sessions, (3) with single-joint or multi-joint exercises, (4) for upper- and lower-body strength assessment, (5) among females and males, and (6) among young to middle-aged adults and among older adults. Most studies did not find systematic changes in test results between the trials.

Conclusions

Based on the results of this review, it can be concluded that the 1RM test generally has good to excellent test–retest reliability, regardless of resistance training experience, number of familiarization sessions, exercise selection, part of the body assessed (upper vs. lower body), and sex or age of participants. Researchers and practitioners, therefore, can use the 1RM test as a reliable test of muscular strength.

The Test-Retest Reliability of Force Plate-Derived Parameters of the Countermovement Push-Up as a Power Assessment Tool

CONTEXT

Muscular power output of the upper limb is a key aspect of athletic and sporting performance. Maximal power describes the ability to immediately produce power with maximal velocity at the point of release, impact, or takeoff, with research highlighting that the greater an athlete's ability to produce maximal power, the greater the improvement in athletic performance. Despite the importance of upper-limb power for athletic performance, there is presently no gold-standard test for upper-limb force development performance.

OBJECTIVE

The aim of this study was to investigate the test-retest reliability of force plate-derived measures of the countermovement push-up in active males.

DESIGN

Test-retest design.

SETTING

Controlled laboratory.

PARTICIPANTS

Physically active college athletes (age 24 [3] y, height 1.79 [0.08] m, body mass 81.7 [9.9] kg).

INTERVENTION

Subjects performed 3 repetitions of maximal effort countermovement push-up trials on Kistler force plates on 2 separate test occasions 7 days apart.

MAIN OUTCOME MEASURES

Peak force, mean force, flight time, rate of force development, and impulse were analyzed from the force-time curve.

RESULTS

No significant differences between the 2 trial occasions were observed for any of the derived performance measures. Intraclass correlation coefficient and within-subject coefficient of variation calculations indicated performance measures to have moderate to very high reliability (intraclass correlation coefficient = .88-.98), coefficient of variation = 5.5%-14.1%). Smallest detectable difference for peak force (7.5%), mean force (8.6%), and rate of force development (11.2%) were small to moderate.

CONCLUSION

Force platform-derived kinetic parameters of countermovement push-up are reliable measurements of power in college-level athletes.

Validity and Reliability of a Standardized Protocol for Assessing the One Repetition Maximum Performance During Overhead Pressing Exercises

Soriano, MA, García-Ramos, A, Torres-González, A, Castillo-Palencia, J, Ayuso, V, Marín, PJ, and Comfort, P. Validity and reliability of a standardized protocol for assessing the one repetition maximum performance during overhead pressing exercises. J Strength Cond Res XX(X): 000-000, 2020-The aim of this study was to determine the validity of performing 3 one repetition maximum (1RM) assessments for the push press (PP), push jerk (PJ), and split jerk (SJ) in sequence in one testing session vs. the criterion method (testing on separate days), while determining the between-session reliability of the combined assessment. Twenty-two well-trained men (n = 22; age: 28.5 + 1.3 years; height: 1.80 + 0.04 m; body mass: 84.9 + 1.9 kg; training experience: 4.27 + 4.08 years) participated in this study. The 1RM was assessed in a sequential order in the same testing session (combined 1RM assessment) for the PP, PJ, and SJ on 2 occasions, to determine between-session reliability. The 1RM for each exercise was also examined on 3 separate sessions to compare the results against the combined method. A high reliability, low variability, and low measurement error were evident for the PP (intraclass correlation coefficient [ICC] = 0.960; coefficient of variation [CV] = 1.8%; smallest detectable difference [SDD] = 7.1%), PJ (ICC = 0.978; CV = 1.5%; SDD = 5.4%) and SJ (ICC = 0.987; CV = 0.8%; SDD = 4.6%). In addition, there were no significant (p > 0.05) or meaningful (η ≤0.001) differences between the single and combined assessments. The high reliability and validity of the combined assessment suggest that practitioners and researchers may simplify the testing procedure by assessing the 1RM during the 3 main overhead pressing exercises in a single testing session.

Reliability of Squat Kinetics in Well-Trained Rugby Players: Implications for Monitoring Training

Appleby, BB, Cormack, SJ, and Newton, RU. Reliability of squat kinetics in well-trained rugby players: implications for monitoring training. J Strength Cond Res 33(10): 2635-2640, 2019-The aim of this study was to determine the within-session reliability in kinetic variables of the squat in well-trained athletes during a typical resistance training protocol. Fifteen subjects completed 2 testing sessions. Session 1 was establishment of 1 repetition maximum (1RM) squat, and session 2 involved 2 sets of 2 maximal effort repetitions of the squat at 70, 80, and 90% of 1RM with 3D motion analysis and ground reaction force (GRF) measurement using 2 in-ground triaxial force plates. Reliability was calculated using typical error ± 90% confidence limits, expressed as the coefficient of variation and intraclass correlation coefficient. The smallest worthwhile change (SWC%), calculated as 0.2 × between-subject SD, was used to determine the smallest important change in performance. Peak GRF and average GRF were found to have acceptable measures of reliability with the combined left and right leg average GRF capable of detecting the SWC. Independent limb contributions were reliable (left and right, or dominant and nondominant). Reliable kinetics can be obtained in back squat performance typical of a resistance training session in well-trained athletes. This suggests that coaches integrating force plate technology within training sessions may effectively capture between 1 and 6 training sets among several athletes, facilitating analysis and intervention on larger data sets.

Physiological, Anthropometric, and Motor Characteristics of Elite Chinese Youth Athletes From Six Different Sports

Several talent selection programs in elite sport schools are based on motor diagnostics for the purpose of recommending or transferring promising talents to general groups of sports; game sports, combat sports or endurance sports, and to more concrete sports such as gymnastics, skiing, or tennis. However, the predictive value of such testing is unclear. This study evaluated the concurrent validity of physiological performance prerequisites, body dimensions, as well as specific motor performances. The sample consisted of N = 97 youth athletes from all ninth grade classes of a Shanghai Elite Sport school belonging to six different sports including basketball (n = 7), fencing (n = 23), judo (n = 20), swimming (n = 10), table tennis (n = 15), and volleyball (n = 22). The performance diagnosis took place between September 2016 and March 2017, and comprised five physiological measurements of the heart rate at rest, vital capacity, systolic and diastolic blood pressure, and hemoglobin concentration in the blood, eighteen anthropometric parameters, and two motor tests on back strength and complex reaction speed. The aim of the study was to investigate whether U15 age group athletes participating in six different sports already at this age show a sport specific anthropometric, motor performance, and physiological profile which is in line with the specific requirements of each of the sports. A discriminant analysis and a Neural Network (Multilayer Perceptron) were used to test whether it is possible to discriminate between athletes of the six sports and to assign each individual of the Under-15 athletes to his own sport on the basis of a unique profile of the morphological, motor, and physiological prerequisites. All diagnostic methods exhibited medium to high validity to discriminate between the six different sports. The relevance of the eighteen body dimensions, five physiological measures, and two motor tests for talent identification was confirmed.

CORP: Measurement of upper and lower limb muscle strength and voluntary activation

Muscle strength, the maximal force-generating capacity of a muscle or group of muscles, is regularly assessed in physiological experiments and clinical trials. An understanding of the expected variation in strength and the factors that contribute to this variation is important when designing experiments, describing methodologies, interpreting results, and attempting to replicate methods of others and reproduce their findings. In this review (Cores of Reproducibility in Physiology), we report on the intra- and inter-rater reliability of tests of upper and lower limb muscle strength and voluntary activation in humans. Isometric, isokinetic, and isoinertial strength exhibit good intra-rater reliability in most samples (correlation coefficients ≥0.90). However, some tests of isoinertial strength exhibit systematic bias that is not resolved by familiarization. With the exception of grip strength, few attempts have been made to examine inter-rater reliability of tests of muscle strength. The acute factors most likely to affect muscle strength and serve as a source of its variation from trial-to-trial or day-to-day include attentional focus, breathing technique, remote muscle contractions, rest periods, temperature (core, muscle), time of day, visual feedback, body and limb posture, body stabilization, acute caffeine consumption, dehydration, pain, fatigue from preceding exercise, and static stretching >60 s. Voluntary activation, the nervous system’s ability to drive a muscle to create its maximal force, exhibits good intra-rater reliability when examined with twitch interpolation (correlation coefficients >0.80). However, inter-rater reliability has not been formally examined. The methodological factors most likely to influence voluntary activation are myograph compliance and sensitivity; stimulation location, intensity, and inadvertent stimulation of antagonists; joint angle (muscle length); and the resting twitch.

Between-Session Reliability of Isometric Midthigh Pull Kinetics and Maximal Power Clean Performance in Male Youth Soccer Players

Dos'Santos, T, Thomas, C, Comfort, P, McMahon, JJ, Jones, PA, Oakley, NP, and Young, AL. Between-session reliability of isometric midthigh pull kinetics and maximal power clean performance in male youth soccer players. J Strength Cond Res 32(12): 3373-3381, 2018-The aim of the study was to determine the between-session reliability of isometric midthigh pull (IMTP) kinetics and maximal weight lifted during the power clean (PC) in male youth soccer players, and to identify the smallest detectable differences between sessions. Thirteen male youth soccer players (age: 16.7 ± 0.5 years, height: 1.80 ± 0.08 m, and mass: 70.5 ± 9.4 kg) performed 3 IMTP trials, whereas only 10 soccer players performed maximal PCs. These were performed twice, separated by 48 hours to examine the between-session reliability. Intraclass correlation coefficients (ICCs) and coefficient of variation (CV) demonstrated high levels of within-session (ICC = 0.84-0.98, CV = 4.05-10.00%) and between-session reliability (ICC = 0.86-0.96, CV = 3.76-7.87%) for IMTP kinetics (peak force [PF] and time-specific force values 30-250 ms) and maximal PC (ICC = 0.96, CV = 3.23%), all meeting minimum acceptable reliability criteria. No significant differences (p > 0.05, effect size ≤0.22) were revealed between sessions for IMTP kinetics and maximal PC performance. Strength and conditioning coaches and practitioners should consider changes of >6.04% in maximal PC and changes in IMTP kinetics of >14.31% in force at 30 ms, >14.73% in force at 50 ms, >12.36% in force at 90 ms, >12.37% in force at 100 ms, >14.51% in force at 150 ms, >11.71% in force at 200 ms, >7.23% in force at 250 ms, and >8.50% in absolute PF as meaningful improvements in male youth soccer players. Decrements in the IMTP kinetics greater than the aforementioned values could possibly be used as an indicator of neuromuscular fatigue and preparedness for training or competition.

Kinetics and Kinematics of the Squat and Step-up in Well-Trained Rugby Players

Appleby, BB, Newton, RU, and Cormack, SJ. Kinetics and kinematics of the squat and step-up in well-trained rugby players. J Strength Cond Res 33(7S): S36-S44, 2019-The purpose of this study was to compare and contrast the kinetics and kinematics of squat and step-up performance in well-trained athletes. Triaxial ground reaction force (GRF) and 3D kinematic data were collected in 4 maximal effort repetitions each at 70, 80, and 90% of 1 repetition maximum (1RM) of squat and step-up. The difference in concentric phase kinetics and kinematics between the squat and step-up was compared using effect sizes (ES ± 90% confidence limits [CLs]) classified as: less than 0.2 as trivial; 0.2-0.6 as small; 0.6-1.2 as moderate; and 1.2-2.0 as large. Where the 90% CL crossed negative and positive 0.2 values, the effect was considered "unclear.n Ground reaction force was higher for the step-up than squat at all relative intensities per leg (peak GRF ES: 2.56 ± 0.19 to 2.70 ± 0.37; average GRF ES: 1.45 ± 0.27 to 1.48 ± 0.29). Per leg, the difference in concentric impulse favored the step-up compared with squat at 70% 1RM (ES = 0.71 ± 0.40) and 80% 1RM (ES = 0.30 ± 0.41) but was unclear at 90% 1RM (ES = -0.25 ± 0.47). The squat peak velocity was greater compared with step-up at all intensities (ES = -1.74 ± 0.48 to -1.33 ± 0.48). Despite a lower external load and a single base of support, per leg, the step-up produced comparable GRF because the squat suggesting overload provided by the step-up is sufficient for maximal strength development. Future research may investigate the efficacy of the step-up in a training intervention for the development of lower-body strength.

Effects of Accentuated Eccentric Loading on Muscle Properties, Strength, Power, and Speed in Resistance-Trained Rugby Players

Douglas, J, Pearson, S, Ross, A, and McGuigan, M. Effects of accentuated eccentric loading on muscle properties, strength, power, and speed in resistance-trained rugby players. J Strength Cond Res 32(10): 2750-2761, 2018-The purpose of this study was to determine the effects of slow and fast tempo resistance training incorporating accentuated eccentric loading (AEL) compared with traditional resistance training (TRT) in trained rugby players. Fourteen subjects (19.4 ± 0.8 years, 1.82 ± 0.05 m, 97.0 ± 11.6 kg, and relative back squat 1 repetition maximum [1RM]: 1.71 ± 0.24 kg·BM) completed either AEL (n = 7) or TRT (n = 7) strength and power protocols. Two 4-week phases of training were completed. The first phase emphasized a slow eccentric tempo, and the second phase emphasized a fast eccentric tempo. Back squat 1RM, inertial load peak power, drop jump reactive strength index (RSI), 40-m speed, maximum sprinting velocity (Vmax), and vastus lateralis (VL) muscle architectural variables were determined at baseline and after each phase of training. Slow AEL elicited superior improvements in back squat 1RM (+0.12 kg·BM; effect size [ES]: 0.48; and 90% confidence interval [CI]: 0.14, 0.82), 40-m time (-0.07 seconds; ES: 0.28; and CI: 0.01-0.55), and Vmax (+0.20 m·s; ES: 0.52; and CI: 0.18-0.86) vs. slow TRT. Fast AEL elicited a small increase in RSI but impaired speed. There was a likely greater increase in peak power with fast TRT (+0.72 W·kg; ES: 0.40; and CI: 0.00-0.79) vs. fast AEL alongside a small increase in VL pennation angle. The short-term incorporation of slow AEL was superior to TRT in improving strength and maximum velocity sprinting speed in rugby players undertaking a concurrent preparatory program. The second 4-week phase of fast AEL may have exceeded recovery capabilities compared with fast TRT.

The Effect of Altering Body Posture and Barbell Position on the Between-Session Reliability of Force-Time Curve Characteristics in the Isometric Mid-Thigh Pull

Seventeen strength and power athletes (n = 11 males, 6 females; height: 177.5 ± 7.0 cm, 165.8 ± 11.4 cm; body mass: 90.0 ± 14.1 kg, 66.4 ± 13.9 kg; age: 30.6 ± 10.4 years, 30.8 ± 8.7 years), who regularly performed weightlifting movements during their resistance training programs, were recruited to examine the effect of altering body posture and barbell position on the between-session reliability of force-time characteristics generated in the isometric mid-thigh pull (IMTP). After participants were familiarised with the testing protocol, they undertook two testing sessions which were separated by seven days. In each session, the participants performed three maximal IMTP trials in each of the four testing positions examined, with the order of testing randomized. In each position, no significant differences were found between sessions for all force-time characteristics (p = >0.05). Peak force (PF), time-specific force (F50, F90, F150, F200, F250) and IMP time-bands (0–50, 0–90, 0–150, 0–200, 0–250 ms) were reliable across each of the four testing positions (ICC ≥ 0.7, CV ≤ 15%). Time to peak force, peak RFD, RFD time-bands (0–50, 0–90, 0–150, 0–200, 0–250 ms) and peak IMP were unreliable regardless of the testing position used (ICC = <0.7, CV = >15%). Overall, the use of body postures and barbell positions during the IMTP that do not correspond to the second pull of the clean have no adverse effect on the reliability of the force-time characteristics generated.

An Investigation Into the Effects of Excluding the Catch Phase of the Power Clean on Force-Time Characteristics During Isometric and Dynamic Tasks: An Intervention Study

Comfort, P, Dos'Santos, T, Thomas, C, McMahon, JJ, and Suchomel, TJ. An investigation into the effects of excluding the catch phase of the power clean on force-time characteristics during isometric and dynamic tasks: an intervention study. J Strength Cond Res 32(8): 2116-2129, 2018-The aims of this study were to compare the effects of the exclusion or inclusion of the catch phase during power clean (PC) derivatives on force-time characteristics during isometric and dynamic tasks, after two 4-week mesocycles of resistance training. Two strength matched groups completed the twice-weekly training sessions either including the catch phase of the PC derivatives (Catch group: n = 16; age 19.3 ± 2.1 years; height 1.79 ± 0.08 m; body mass 71.14 ± 11.79 kg; PC 1 repetition maximum [1RM] 0.93 ± 0.15 kg·kg) or excluding the catch phase (Pull group: n = 18; age 19.8 ± 2.5 years; height 1.73 ± 0.10 m; body mass 66.43 ± 10.13 kg; PC 1RM 0.91 ± 0.18 kg·kg). The Catch and Pull groups both demonstrated significant (p ≤ 0.007, power ≥0.834) and meaningful improvements in countermovement jump height (10.8 ± 12.3%, 5.2 ± 9.2%), isometric mid-thigh pull performance (force [F]100: 14.9 ± 17.2%, 15.5 ± 16.0%, F150: 16.0 ± 17.6%, 16.2 ± 18.4%, F200: 15.8 ± 17.6%, 17.9 ± 18.3%, F250: 10.0 ± 16.1%,10.9 ± 14.4%, peak force: 13.7 ± 18.7%, 9.7 ± 16.3%), and PC 1RM (9.5 ± 6.2%, 8.4 ± 6.1%), before and after intervention, respectively. In contrast to the hypotheses, there were no meaningful or significant differences in the percentage change for any variables between groups. This study clearly demonstrates that neither the inclusion nor exclusion of the catch phase of the PC derivatives results in any preferential adaptations over two 4-week, in-season strength and power, mesocycles.

Comparison of Methods of Calculating Dynamic Strength Index

Purpose: To determine the reliability and variability of the Dynamic Strength Index (DSI) calculated from squat-jump (SJ) vs countermovement-jump (CMJ) peak force (PF) and to compare DSI values between methods. Methods: Male youth soccer and rugby league players (N = 27; age 17.2 ± 0.7 y, height 173.9 ± 5.7 cm, body mass 71.1 ± 7.2 kg) performed 3 trials of the SJ, CMJ, and isometric midthigh pull (IMTP) on 2 separate days. DSI was calculated by dividing the PF during each jump by the IMTP PF. Results: DSI-SJ exhibited moderate (intraclass correlation coefficient [ICC] = .419) within-session reliability and high variability (percentage coefficient of variation [%CV] = 15.91) during session 1; however, this improved noticeably during session 2 (ICC = .948, %CV = 4.03). In contrast, DSI-CMJ showed nearly perfect within-session reliability (ICC = .920–.952) and low variability (%CV = 3.80–4.57) for both sessions. Moreover, DSI-SJ values demonstrated a small yet significant increase between sessions (P = .01, d = 0.37), whereas only a trivial and nonsignificant increase was observed for DSI-CMJ between sessions (P = .796, d = 0.07). Between-sessions reliability was very high for the DSI-SJ (ICC = .741) and nearly perfect for the DSI-CMJ (ICC = .924). There was no significant or meaningful difference (P = .261, d = 0.12) between DSI-SJ (0.82 ± 0.18) and DSI-CMJ (0.84 ± 0.15). Conclusions: Practitioners should use DSI-CMJ, as it is a more reliable measure than DSI-SJ, although it produces similar ratios.

Physical characteristics of players within the Australian Football League participation pathways: a systematic review

Background

Australian football (AF) players require endurance, strength, speed, and agility to be successful. Tests assessing physical characteristics are commonly used for talent identification; however, their ability to differentiate between players across the Australian Football League’s (AFL) participation pathway remains unclear. The objective of this review was to quantify the physical characteristics of male AF players across the AFL participation pathway.

Methods

A search of databases was undertaken. Studies examining tests of physical performance were included, with 27 meeting the inclusion/exclusion criteria. Study appraisal was conducted using a checklist of selection criteria.

Results

The 20-m sprint time was the most reported test, followed by vertical jump (VJ), AFL planned agility, and 20-m multi-stage fitness test (MSFT). The fastest times for 20-m sprint were for Elite AFL players (range 2.94–3.13 s), with local-level players the slowest (3.22–4.06 s). State Junior Under (U) 18s (58–66 cm) had higher jumps than senior players, with the lowest jumps reported for Local U10s (mean 31 cm). No elite-level data were reported for the AFL planned agility or 20-m MSFT. AFL planned agility times were only reported for talent pathway levels, with large performance variability evident across all levels (8.17–9.12 s). Only mean 20-m MSFT scores were reported from Local U10s to National Draft Camp (6.10–13.50 shuttles).

Conclusions

Talent pathway players exhibit similar mean test scores irrespective of the physical test, with the exception of 20-m sprint and VJ. Physical tests can discriminate between local participation level players but are less useful within the AFL talent pathway.

Reliability and Validity of the Load-Velocity Relationship to Predict the 1RM Back Squat

Banyard, HG, Nosaka, K, and Haff, GG. Reliability and validity of the load-velocity relationship to predict the 1RM back squat. J Strength Cond Res 31(7): 1897-1904, 2017-This study investigated the reliability and validity of the load-velocity relationship to predict the free-weight back squat one repetition maximum (1RM). Seventeen strength-trained males performed three 1RM assessments on 3 separate days. All repetitions were performed to full depth with maximal concentric effort. Predicted 1RMs were calculated by entering the mean concentric velocity of the 1RM (V1RM) into an individualized linear regression equation, which was derived from the load-velocity relationship of 3 (20, 40, 60% of 1RM), 4 (20, 40, 60, 80% of 1RM), or 5 (20, 40, 60, 80, 90% of 1RM) incremental warm-up sets. The actual 1RM (140.3 ± 27.2 kg) was very stable between 3 trials (ICC = 0.99; SEM = 2.9 kg; CV = 2.1%; ES = 0.11). Predicted 1RM from 5 warm-up sets up to and including 90% of 1RM was the most reliable (ICC = 0.92; SEM = 8.6 kg; CV = 5.7%; ES = -0.02) and valid (r = 0.93; SEE = 10.6 kg; CV = 7.4%; ES = 0.71) of the predicted 1RM methods. However, all predicted 1RMs were significantly different (p ≤ 0.05; ES = 0.71-1.04) from the actual 1RM. Individual variation for the actual 1RM was small between trials ranging from -5.6 to 4.8% compared with the most accurate predictive method up to 90% of 1RM, which was more variable (-5.5 to 27.8%). Importantly, the V1RM (0.24 ± 0.06 m·s) was unreliable between trials (ICC = 0.42; SEM = 0.05 m·s; CV = 22.5%; ES = 0.14). The load-velocity relationship for the full depth free-weight back squat showed moderate reliability and validity but could not accurately predict 1RM, which was stable between trials. Thus, the load-velocity relationship 1RM prediction method used in this study cannot accurately modify sessional training loads because of large V1RM variability.

The Influence of Resistance Training Experience on the Between-Day Reliability of Commonly Used Strength Measures in Male Youth Athletes

Weakley, JJS, Till, K, Darrall-Jones, J, Roe, GAB, Phibbs, PJ, Read, DB, and Jones, BL. The influence of resistance training experience on the between-day reliability of commonly used strength measures in male youth athletes. J Strength Cond Res 31(7): 2005-2010, 2017-The purpose of this study was to determine the between-day reliability of commonly used strength measures in male youth athletes while considering resistance training experience. Data were collected on 25 male athletes over 2 testing sessions, with 72 hours rest between, for the 3 repetition maximum (3RM) front squat, chin-up, and bench press. Subjects were initially categorized by resistance training experience (inexperienced; 6-12 months, experienced; >2 years). The assessment of the between-day reliability (coefficient of variation [CV%]) showed that the front squat (experienced: 2.90%; inexperienced: 1.90%), chin-up (experienced: 1.70%; inexperienced: 1.90%), and bench press (experienced: 4.50%; inexperienced: 2.40%) were all reliable measures of strength in both groups. Comparison between groups for the error of measurement for each exercise showed trivial differences. When both groups were combined, the CV% for the front squat, bench press, and chin-up were 2.50, 1.80, and 3.70%, respectively. This study provides scientists and practitioners with the between-day reliability reference data to determine real and practical changes for strength in male youth athletes with different resistance training experience. Furthermore, this study demonstrates that 3RM front squat, chin-up, and bench press are reliable exercises to quantify strength in male youth athletes.

Relationships between Isometric Force-Time Characteristics and Dynamic Performance

The purpose of this study was to explore the relationships between isometric mid-thigh pull (IMTP) force-time characteristics (peak force and time-specific force vales (100⁻250 ms)) and dynamic performance and compare dynamic performance between stronger and weaker athletes. Forty-three athletes from different sports (rowing, soccer, bicycle motocross, and hockey) performed three trials of the squat jump (SJ), countermovement jump (CMJ), and IMTP, and performed a one repetition maximum power clean (PC). Reactive strength index modified (RSImod) was also calculated from the CMJ. Statistically significant large correlations between IMTP force-time characteristics and PC (ρ = 0.569⁻0.674, p < 0.001), and moderate correlations between IMTP force-time characteristics (excluding force at 100 ms) and RSImod (ρ = 0.389⁻0.449, p = 0.013⁻0.050) were observed. Only force at 250 ms demonstrated a statistically significant moderate correlation with CMJ height (ρ = 0.346, p = 0.016) and no statistically significant associations were observed between IMTP force-time characteristics and SJ height. Stronger athletes (top 10) demonstrated statistically significantly greater CMJ heights, RSImods, and PCs (p ≤ 0.004, g = 1.32⁻1.89) compared to weaker (bottom 10) athletes, but no differences in SJ height were observed (p = 0.871, g = 0.06). These findings highlight that the ability to apply rapidly high levels of force in short time intervals is integral for PC, CMJ height, and reactive strength.

Redistributing load using wearable resistance during power clean training improves athletic performance

A popular method to improve athletic performance and lower body power is to train with wearable resistance (WR), for example, weighted vests. However, it is currently unknown what training effect this loading method has on full-body explosive movements such as the power clean. The purpose of this study was to determine what effects WR equivalent to 12% body mass (BM) had on the power clean and countermovement jump (CMJ) performance. Sixteen male subjects (age: 23.2 ± 2.7 years; BM: 90.5 ± 10.3 kg) were randomly assigned to five weeks of traditional (TR) power clean training or training with 12% BM redistributed from the bar to the body using WR. Variables of interest included pre and post CMJ height, power clean one repetition maximum (1RM), peak ground reaction force, power output (PO), and several bar path kinematic variables across loads at 50%, 70%, and 90% of 1RM. The main findings were that WR training: (1) increased CMJ height (8.7%; ES = 0.53) and 1RM power clean (4.2%; ES = 0.2) as compared to the TR group (CMJ height = -1.4%; 1RM power clean = 1.8%); (2) increased PO across all 1RM loads (ES = 0.33-0.62); (3) increased barbell velocity at 90% 1RM (3.5%; ES = 0.74) as compared to the TR group (-4.3%); and (4) several bar path kinematic variables improved at 70% and 90% 1RM loads. WR power clean training with 12% BM can positively influence power clean ability and CMJ performance, as well as improve technique factors.

Carbohydrate mouth rinse improves morning high-intensity exercise performance

Oral carbohydrate (CHO) rinsing has been demonstrated to provide beneficial effects on exercise performance of durations of up to one hour. The aim of the present study was to investigate the effects of CHO mouth rinsing on morning high-intensity exercise performance. Following institutional ethical approval and familiarisation, 12 healthy males (mean ± SD age: 23 ± 3 years, height: 175.5 ± 7.4 cm, body mass: 75.4 ± 7.5 kg) participated in this study. Countermovement jump (CMJ) height, isometric mid-thigh pull peak force, 10 m sprint time and bench press and back squat repetitions to failure were assessed following CHO and placebo (PLA) rinsing or a control condition (CON). All testing took place at 07:30 following an 11 hour overnight fast. Performance of CMJ height (CHO: 39 ± 7 cm; PLA: 38 ± 7 cm; CON: 36 ± 6 cm; P = .003, [Formula: see text] = 0.40), 10 m sprint time (CHO: 1.78 ± 0.07 s; PLA: 1.81 ± 0.07 s; CON: 1.85 ± 0.05 s; P = .001, [Formula: see text] = 0.47), the number of bench press (CHO: 25 ± 3; PLA: 24 ± 4; CON: 22 ± 4; P < .001, [Formula: see text] = 0.55) and squat (CHO: 31 ± 4; PLA: 29 ± 5; CON: 26 ± 6; P < .001, [Formula: see text] = 0.70) repetitions and mean felt arousal (CHO: 5 ± 1; PLA: 4 ± 0; CON: 4 ± 0; P = .009, [Formula: see text] = 0.25) improved following CHO rinsing. However, isometric mid-thigh pull peak force was unchanged (CHO: 2262 ± 288 N; PLA: 2236 ± 354 N; CON: 2212 ± 321 N; P = .368, [Formula: see text] = 0.08). These results suggest that oral CHO rinsing solution significantly improved the morning performance of CMJ height, 10 m sprint times, bench press and squat repetitions to failure and felt arousal, although peak force during an isometric mid-thigh pull, rating of perceived exertion and heart rate were unaffected.

Worse self-reported outcomes but no limitations in performance-based measures in patients with long-standing hip and groin pain compared with healthy controls

PURPOSE

This study aimed to evaluate patient-reported outcomes as well as lower extremity and trunk muscle function in patients with long-standing hip and groin pain, in comparison with matched, healthy controls. It was hypothesized that patients with long-standing hip and groin pain would report more deficiency on the Copenhagen Hip and Groin Outcome Score (HAGOS) and have worse outcomes on performance-based measures than healthy controls.

METHODS

Nineteen patients with long-standing hip and groin pain and 19 healthy, activity level-, age-, gender-, and weight-matched controls were assessed with the HAGOS for self-reported outcomes, and a parallel squat (w/kg), single-leg triple jump (cm), single-leg rise (n), barbell roll-out (% of height), and plank test (s) for performance-based measures. Independent sample t test was performed to assess between-group differences. The paired t test was used to analyse between-limb differences in unilateral performance tasks.

RESULTS

The patients had worse scores than the controls in all HAGOS subscales (p ≤ 0.001), while no statistically significant differences were observed for any performance measure between groups or between symptomatic and non-symptomatic limbs.

CONCLUSIONS

Despite significant self-reported functional limitations on the HAGOS, there were no significant differences between groups in performance-based strength or power measures. The results of this study highlight the need to identify performance-based measures, sensitive to functional deficiencies in patients with long-standing hip and groin pain in order to complement the clinical picture obtained by patient-reported outcomes such as the HAGOS.

LEVEL OF EVIDENCE

III.