Imaging coronary artery microstructure using second-harmonic and two-photon fluorescence microscopy

Extraction of collagen morphological features from second-harmonic generation microscopy images via GLCM and CT analyses: A cross-laboratory study

Second-harmonic generation (SHG) microscopy provides a high-resolution label-free approach for noninvasively detecting collagen organization and its pathological alterations. Up to date, several imaging analysis algorithms for extracting collagen morphological features from SHG images-such as fiber size and length, order and anisotropy-have been developed. However, the dependence of extracted features on experimental setting represents a significant obstacle for translating the methodology in the clinical practice. We tackled this problem by acquiring SHG images of the same kind of collagenous sample in various laboratories using different experimental setups and imaging conditions. The acquired images were analyzed by commonly used algorithms, such as gray-level co-occurrence matrix or curvelet transform; the extracted morphological features were compared, finding that they strongly depend on some experimental parameters, whereas they are almost independent from others. We conclude with useful suggestions for comparing results obtained in different labs using different experimental setups and conditions.

Performance of drug-coated balloons in coronary and below-the-knee arteries: Anatomical, physiological and pathological considerations

Below-the-knee (infrapopliteal) atherosclerotic disease, which presents as chronic limb-threatening ischemia (CLTI) in nearly 50% of patients, represents a treatment challenge when it comes to the endovascular intervention arm of management. Due to reduced tissue perfusion, patients usually experience pain at rest and atrophic changes correlated to the extent of the compromised perfusion. Unfortunately, the prognosis remains unsatisfactory with 30% of patients requiring major amputation and a mortality rate of 25% within 1 year. To date, randomized multicentre trials of endovascular intervention have shown that drug-eluting stents (DES) increase patency rate and lower target lesion revascularization rate compared to plain balloon angioplasty and bare-metal stents. The majority of these trials recruited patients with focal infrapopliteal lesions, while most patients requiring endovascular intervention have complex and diffuse atherosclerotic disease. Moreover, due to the nature of the infrapopliteal arteries, the use of long DES is limited. Following recent results of drug-coated balloons (DCBs) in the treatment of femoropopliteal and coronary arteries, it was hoped that similar effective results would be achieved in the infrapopliteal arteries. In reality, multicentre trials have failed to support the proposed hypothesis and no advantage was found in using DCBs in comparison to plain balloon angioplasty. This review aims to explore anatomical, physiological and pathological differences between lesions of the infrapopliteal and coronary arteries to explain the differences in outcome when using DCBs.

Analysis of age-related changes in the left ventricular myocardium with multiphoton microscopy

Aging induces cardiac remodeling, resulting in an increase in the risk of suffering heart diseases, including heart failure. Collagen deposition increases with age and, together with sarcomeric changes in cardiomyocytes, may lead to ventricular stiffness. Multiphoton (MP) microscopy is a useful technique to visualize and detect variations in cardiac structures in a label free fashion. Here, we propose a method based on MP imaging (both two-photon excitation fluorescence (TPEF) and second harmonic generation (SHG) modalities) to explore and objectively quantify age-related structural differences in various components of cardiac tissues. Results in transmural porcine left ventricle (LV) sections reveal significant differences when comparing samples from young and old animals. Collagen and myosin SHG signals in old specimens are respectively 3.8x and >6-fold larger than in young ones. Differences in TPEF signals from cardiomyocyte were ∼3x. Moreover, the increased amount of collagen in old specimens results in a more organized pattern when compared to young LV tissues. Since changes in collagen and myosin are associated with cardiac dysfunction, the technique used herein might be a useful tool to accurately predict and measure changes associated with age-related myocardium fibrosis, tissue remodeling and sarcomeric alterations, with potential implications in preventing heart disease.

Modelling coronary flow and myocardial perfusion by integrating a structured-tree coronary flow model and a hyperelastic left ventricle model

BACKGROUND AND OBJECTIVE

There is an increasing demand to establish integrated computational models that facilitate the exploration of coronary circulation in physiological and pathological contexts, particularly concerning interactions between coronary flow dynamics and myocardial motion. The field of cardiology has also demonstrated a trend toward personalised medicine, where these integrated models can be instrumental in integrating patient-specific data to improve therapeutic outcomes. Notably, incorporating a structured-tree model into such integrated models is currently absent in the literature, which presents a promising prospect. Thus, the goal here is to develop a novel computational framework that combines a 1D structured-tree model of coronary flow in human coronary vasculature with a 3D left ventricle model utilising a hyperelastic constitutive law, enabling the physiologically accurate simulation of coronary flow dynamics.

METHODS

We adopted detailed geometric information from previous studies of both coronary vasculature and left ventricle to construct the coronary flow model and the left ventricle model. The structured-tree model for coronary flow was expanded to encompass the effect of time-varying intramyocardial pressure on intramyocardial blood vessels. Simultaneously, the left ventricle model served as a robust foundation for the calculation of intramyocardial pressure and subsequent quantitative evaluation of myocardial perfusion. A one-way coupling framework between the two models was established to enable the evaluation and examination of coronary flow dynamics and myocardial perfusion.

RESULTS

Our predicted coronary flow waveforms aligned well with published experimental data. Our model precisely captured the phasic pattern of coronary flow, including impeded or even reversed flow during systole. Moreover, our assessment of coronary flow, considering both globally and regionally averaged intramyocardial pressure, demonstrated that elevated intramyocardial pressure corresponds to increased impeding effects on coronary flow. Furthermore, myocardial blood flow simulated from our model was comparable with MRI perfusion data at rest, showcasing the capability of our model to predict myocardial perfusion.

CONCLUSIONS

The integrated model introduced in this study presents a novel approach to achieving physiologically accurate simulations of coronary flow and myocardial perfusion. It holds promise for its clinical applicability in diagnosing insufficient myocardial perfusion.

SNR enhanced high-speed two-photon microscopy using a pulse picker and time gating detection

Two-photon microscopy (TPM) is an attractive biomedical imaging method due to its large penetration depth and optical sectioning capability. In particular, label-free autofluorescence imaging offers various advantages for imaging biological samples. However, relatively low intensity of autofluorescence leads to low signal-to-noise ratio (SNR), causing practical challenges for imaging biological samples. In this study, we present TPM using a pulse picker to utilize low pulse repetition rate of femtosecond pulsed laser to increase the pulse peak power of the excitation source leading to higher emission of two-photon fluorescence with the same average illumination power. Stronger autofluorescence emission allowed us to obtain higher SNR images of arterial and liver tissues. In addition, by applying the time gating detection method to the pulse signals obtained by TPM, we were able to significantly reduce the background noise of two-photon images. As a result, our TPM system using the pulsed light source with a 19 times lower repetition rate allowed us to obtain the same SNR image more than 19 times faster with the same average power. Although high pulse energy can increase the photobleaching, we also observed that high-speed imaging with low total illumination energy can mitigate the photobleaching effect to a level similar to that of conventional illumination with a high repetition rate. We anticipate that this simple approach will provide guidance for SNR enhancement with high-speed imaging in TPM as well as other nonlinear microscopy.

A novel histological occlusion classification for coiled aneurysms based on multiphoton microscopy

OBJECTIVE

Intracranial aneurysm (IA) coiling remains the most commonly used endovascular approach for ruptured and unruptured IA, and recanalization is a common drawback that impairs treatment success. Angiographic occlusion and aneurysm healing are not synonymous, and histological evaluation of embolized aneurysms remains a challenge. We propose here an experimental study of coil embolization in animal models by multiphoton microscopy (MPM) in comparison with conventional histological staining. The purpose of his work is to analyze coil healing process using histological sections of aneurysms.

METHODS

Based on a rabbit elastase model, 27 aneurysms were fixed, embedded in resin, and cut in thin histological sections 1 month after coils implantation and after angiographic control. Hematoxylin and eosin (H&S) staining were realized. Non-stained adjacent slices were imaged for multiphoton excited autofluorescence (AF) and second-harmonic generation (SHG) to construct three-dimensional (3D) projections of sequentially and axially acquired images.

RESULTS

The contrast provided by the combination of these two imaging modalities can be used to distinguish five levels of aneurysm healing, based on a combination of thrombus evolution and increased extracellular matrix (ECM) deposit.

CONCLUSION

RDPC:\Users\SHAHUL\RDP6|We have established a novel histological scale from a rabbit elastase aneurysm model after coiling with a classification of five different stages thanks to nonlinear microscopy. This classification is an actualized tool in order to obtain a more precise evaluation of occlusion device efficacy in the scope of new innovative microscopy for research.

Label-free multimodal imaging of infected Galleria mellonella larvae

Non-linear imaging modalities have enabled us to obtain unique morpho-chemical insights into the tissue architecture of various biological model organisms in a label-free manner. However, these imaging techniques have so far not been applied to analyze the Galleria mellonella infection model. This study utilizes for the first time the strength of multimodal imaging techniques to explore infection-related changes in the Galleria mellonella larvae due to massive E. faecalis bacterial infection. Multimodal imaging techniques such as fluorescent lifetime imaging (FLIM), coherent anti-Stokes Raman scattering (CARS), two-photon excited fluorescence (TPEF), and second harmonic generation (SHG) were implemented in conjunction with histological HE images to analyze infection-associated tissue damage. The changes in the larvae in response to the infection, such as melanization, vacuolization, nodule formation, and hemocyte infiltration as a defense mechanism of insects against microbial pathogens, were visualized after Enterococcus faecalis was administered. Furthermore, multimodal imaging served for the analysis of implant-associated biofilm infections by visualizing biofilm adherence on medical stainless steel and ePTFE implants within the larvae. Our results suggest that infection-related changes as well as the integrity of the tissue of G. mellonella larvae can be studied with high morphological and chemical contrast in a label-free manner.

Changes in the microstructure of the human aortic medial layer under biaxial loading investigated by multi-photon microscopy

Understanding the correlation between tissue architecture, health status, and mechanical properties is essential for improving material models and developing tissue engineering scaffolds. Since structural-based material models are state of the art, there is an urgent need for experimentally obtained structural parameters. For this purpose, the medial layer of nine human abdominal aortas was simultaneously subjected to equibiaxial loading and multi-photon microscopy. At each loading interval of 0.02, collagen and elastin fibers were imaged based on their second-harmonic generation signal and two-photon excited autofluorescence, respectively. The structural alterations in the fibers were quantified using the parameters of orientation, diameter, and waviness. The results of the mechanical tests divided the sample cohort into the ruptured and non-ruptured, and stiff and non-stiff groups, which were covered by the findings from histological investigations. The alterations in structural parameters provided an explanation for the observed mechanical behavior. In addition, the waviness parameters of both collagen and elastin fibers showed the potential to serve as indicators of tissue strength. The data provided address deficiencies in current material models and bridge multiscale mechanisms in the aortic media. STATEMENT OF SIGNIFICANCE: Available material models can reproduce, but cannot predict, the mechanical behavior of human aortas. This deficiency could be overcome with the help of experimentally validated structural parameters as provided in this study. Simultaneous multi-photon microscopy and biaxial extension testing revealed the microstructure of human aortic media at different stretch levels. Changes in the arrangement of collagen and elastin fibers were quantified using structural parameters such as orientation, diameter and waviness. For the first time, structural parameters of human aortic tissue under continuous loading conditions have been obtained. In particular, the waviness parameters at the reference configuration have been associated with tissue stiffness, brittleness, and the onset of atherosclerosis.

Linking the region-specific tissue microstructure to the biaxial mechanical properties of the porcine left anterior descending artery

Coronary atherosclerosis is the main cause of death worldwide. Advancing the understanding of coronary microstructure-based mechanics is fundamental for the development of therapeutic tools and surgical procedures. Although the passive biaxial properties of the coronary arteries have been extensively explored, their regional differences and the relationship between tissue microstructure and mechanics have not been fully characterized. In this study, we characterized the passive biaxial mechanical properties and microstructural properties of the proximal, medial, and distal regions of the porcine left anterior descending artery (LADA). We also attempted to relate the biaxial stress-stretch response of the LADA and its respective birefringent responses to the polarized light for obtaining information about the load-dependent microstructural variations. We found that the LADA extensibility is reduced in the proximal-to-distal direction and that the medial region exhibits more heterogeneous mechanical behavior than the other two regions. We have also observed highly dynamic microstructural behavior where fiber families realign themselves depending on loading. In addition, we found that the microstructure of the distal region exhibited highly aligned fibers along the longitudinal axis of the artery. To verify this microstructural feature, we imaged the LADA specimens with multi-photon microscopy and observed that the adventitia microstructure transitioned from a random fiber network in the proximal region to highly aligned fibers in the distal region. Our findings could offer new perspectives for understanding coronary mechanics and aid in the development of tissue-engineered vascular grafts, which are currently limited due to their mismatch with native tissue in terms of mechanical properties and microstructural features. STATEMENT OF SIGNIFICANCE: The tissue biomechanics of coronary arteries is fundamental for the development of revascularization techniques such as coronary artery bypass. These therapeutics require a deep understanding of arterial mechanics, microstructure, and mechanobiology to prevent graft failure and reoperation. The present study characterizes the unique regional mechanical and microstructural properties of the porcine left anterior descending artery using biaxial testing, polarized-light imaging, and confocal microscopy. This comprehensive characterization provides an improved understanding of the collagen/elastin architecture in response to mechanical loads using a region-specific approach. The unique tissue properties obtained from this study will provide guidance for the selection of anastomotic sites in coronary artery bypass grafting and for the design of tissue-engineered vascular grafts.

Label-free second harmonic generation imaging of cerebral vascular wall in local ischemia mouse model in vivo

Second harmonic generation (SHG) imaging is label-free and non-invasive, and it has been extensively applied in multiple biological and medical studies, but not in the brain in vivo. In this study, we modified classical two photon excited fluorescence (TPEF) system to perform in vivo simultaneous TPEF and SHG imaging in the local ischemia mouse model. In cerebral vascular walls, we found strong SHG signal, which co-localized with collagen. In the continuous 2 days' in vivo imaging, this SHG signal remained stable in the local ischemic blood vessel in the initial 4 hours, then its signal abruptly increased and got spatially thickened 5 hours after thrombosis, and this tendency continued in the following 48 hours. This study provides direct and precise timeline of rapid collagen change in cerebral vascular walls in vivo, and reveals the subtle but significant temporal-spatial dynamics of this structural signal during local ischemia. Thus, this cerebral in vivo SHG imaging provides a powerful tool to identify the early and subtle pathological change of collagen around clinical key therapeutic time window.

Biomechanics of human trabecular meshwork in healthy and glaucoma eyes via dynamic Schlemm's canal pressurization

BACKGROUND AND OBJECTIVE

The trabecular meshwork (TM) consists of extracellular matrix (ECM) with embedded collagen and elastin fibers providing its mechanical support. TM stiffness is considerably higher in glaucoma eyes. Emerging data indicates that the TM moves dynamically with transient intraocular pressure (IOP) fluctuations, implying the viscoelastic mechanical behavior of the TM. However, little is known about TM viscoelastic behavior. We calculated the viscoelastic mechanical properties of the TM in n = 2 healthy and n = 2 glaucoma eyes.

METHODS

A quadrant of the anterior segment was submerged in a saline bath, and a cannula connected to an adjustable saline reservoir was inserted into Schlemm's canal (SC). A spectral domain-OCT (SD-OCT) provided continuous cross-sectional B-scans of the TM/JCT/SC complex during pressure oscillation from 0 to 30 mmHg at two locations. The TM/JCT/SC complex boundaries were delineated to construct a 20-µm-thick volume finite element (FE) mesh. Pre-tensioned collagen and elastin fibrils were embedded in the model using a mesh-free penalty-based cable-in-solid algorithm. SC pressure was represented by a position- and time-dependent pressure boundary; floating boundary conditions were applied to the other cut edges of the model. An FE-optimization algorithm was used to adjust the ECM/fiber mechanical properties such that the TM/JCT/SC model and SD-OCT imaging data best matched over time.

RESULTS

Significantly larger short- and long-time ECM shear moduli (p = 0.0032), and collagen (1.82x) and elastin (2.72x) fibril elastic moduli (p = 0.0001), were found in the TM of glaucoma eyes compared to healthy controls.

CONCLUSIONS

These findings provide additional clarity on the mechanical property differences in healthy and glaucomatous outflow pathway under dynamic loading. Understanding the viscoelastic properties of the TM may serve as a new biomarker in early diagnosis of glaucoma.

Nicotine Affects Murine Aortic Stiffness and Fatigue Response During Supraphysiological Cycling

Nicotine exposure is a major risk factor for several cardiovascular diseases. Although the deleterious effects of nicotine on aortic remodeling processes have been studied to some extent, the biophysical consequences are not fully elucidated. In this investigation, we applied quasi-static and dynamic loading to quantify ways in which exposure to nicotine affects the mechanical behavior of murine arterial tissue. Segments of thoracic aortas from C57BL/6 mice exposed to 25 mg/kg/day of subcutaneous nicotine for 28 days were subjected to uniaxial tensile loading in an open-circumferential configuration. Comparing aorta segments from nicotine-treated mice relative to an equal number of control counterparts, stiffness in the circumferential direction was nearly twofold higher (377 kPa ± 165 kPa versus 191 kPa ± 65 kPa, n = 5, p = 0.03) at 50% strain. Using a degradative power-law fit to fatigue data at supraphysiological loading, we observed that nicotine-treated aortas exhibited significantly higher peak stress, greater loss of tension, and wider oscillation band than control aortas (p ≤ 0.01 for all three variables). Compared to simple stress relaxation tests, fatigue cycling is shown to be more sensitive and versatile in discerning nicotine-induced changes in mechanical behavior over many cycles. Supraphysiological fatigue cycling thus may have broader potential to reveal subtle changes in vascular mechanics caused by other exogenous toxins or pathological conditions.

Muscular and Tendon Degeneration after Achilles Rupture: New Insights into Future Repair Strategies

Achilles tendon rupture is a frequent injury with an increasing incidence. After clinical surgical repair, aimed at suturing the tendon stumps back into their original position, the repaired Achilles tendon is often plastically deformed and mechanically less strong than the pre-injured tissue, with muscle fatty degeneration contributing to function loss. Despite clinical outcomes, pre-clinical research has mainly focused on tendon structural repair, with a lack of knowledge regarding injury progression from tendon to muscle and its consequences on muscle degenerative/regenerative processes and function. Here, we characterize the morphological changes in the tendon, the myotendinous junction and muscle belly in a mouse model of Achilles tendon complete rupture, finding cellular and fatty infiltration, fibrotic tissue accumulation, muscle stem cell decline and collagen fiber disorganization. We use novel imaging technologies to accurately relate structural alterations in tendon fibers to pathological changes, which further explain the loss of muscle mechanical function after tendon rupture. The treatment of tendon injuries remains a challenge for orthopedics. Thus, the main goal of this study is to bridge the gap between clinicians’ knowledge and research to address the underlying pathophysiology of ruptured Achilles tendon and its consequences in the gastrocnemius. Such studies are necessary if current practices in regenerative medicine for Achilles tendon ruptures are to be improved.

Membrane curvature and connective fiber alignment in guinea pig round window membrane

The round window membrane (RWM) covers an opening between the perilymph fluid-filled inner ear space and the air-filled middle ear space. As the only non-osseous barrier between these two spaces, the RWM is an ideal candidate for aspiration of perilymph for diagnostics purposes and delivery of medication for treatment of inner ear disorders. Routine access across the RWM requires the development of new surgical tools whose design can only be optimized with a thorough understanding of the RWM's structure and properties. The RWM possesses a layer of collagen and elastic fibers so characterization of the distribution and orientation of these fibers is essential. Confocal and two-photon microscopy were conducted on intact RWMs in a guinea pig model to characterize the distribution of collagen and elastic fibers. The fibers were imaged via second-harmonic-generation, autofluorescence, and Rhodamine B staining. Quantitative analyses of both fiber orientation and geometrical properties of the RWM uncovered a significant correlation between mean fiber orientations and directions of zero curvature in some portions of the RWM, with an even more significant correlation between the mean fiber orientations and linear distance along the RWM in a direction approximately parallel to the cochlear axis. The measured mean fiber directions and dispersions can be incorporated into a generalized structure tensor for use in the development of continuum anisotropic mechanical constitutive models that in turn will enable optimization of surgical tools to access the cochlea. STATEMENT OF SIGNIFICANCE: The Round Window Membrane (RWM) is the only non-osseous barrier separating the middle and inner ear spaces, and thus is an ideal portal for medical access to the cochlea. An understanding of RWM structure and mechanical response is necessary to optimize the design of surgical tools for this purpose. The RWM geometry and the connective fiber orientation and dispersion are measured via confocal and 2-photon microscopy. A region of the RWM geometry is characterized as a hyperbolic paraboloid and another region as a tapered parabolic cylinder. Predominant fiber directions correlate well with directions of zero curvature in the hyperbolic paraboloid region. Overall fiber directions correlate well with position along a line approximately parallel to the central axis of the cochlea's spiral.

RNO3 QTL Regulates Vascular Structure and Arterial Stiffness in the Spontaneously Hypertensive Rat

Increased arterial stiffness is an independent risk factor for hypertension, stroke, and cardiovascular morbidity. Thus, understanding the factors contributing to vascular stiffness is of critical importance. Here, we used a rat model containing a known quantitative trait locus (QTL) on chromosome 3 (RNO3) for vasoreactivity to assess potential genetic elements contributing to blood pressure, arterial stiffness, and their downstream effects on cardiac structure and function. Although no differences were found in blood pressure at any time point between parental spontaneously hypertensive rats (SHRs) and congenic SHR.BN3 rats, the SHRs showed a significant increase in arterial stiffness measured by pulse wave velocity. The degree of arterial stiffness increased with age in the SHRs and was associated with compensatory cardiac changes at 16 wk of age, and decompensatory changes at 32 wk, with no change in cardiac structure or function in the SHR.BN3 hearts at these time points. To evaluate the arterial wall structure, we used multiphoton microscopy to quantify cells and collagen content within the adventitia and media of SHR and SHR.BN3 arteries. No difference in cell numbers or proliferation rates was found, although phenotypic diversity was characterized in vascular smooth muscle cells. Herein, significant anatomical and physiological differences related to arterial structure and cardiovascular tone including collagen, pulse wave velocity (PWV), left ventricular (LV) geometry and function, and vascular smooth muscle cell (VSMC) contractile apparatus proteins were associated with the RNO3 QTL, thus providing a novel platform for studying arterial stiffness. Future studies delimiting the RNO3 QTL could aid in identifying genetic elements responsible for arterial structure and function.

High Resolution and Labeling Free Studying the 3D Microstructure of the Pars Tensa-Annulus Unit of Mice

Hearing loss is a serious illness affecting people’s normal life enormously. The acoustic properties of a tympanic membrane play an important role in hearing, and highly depend on its geometry, composition, microstructure and connection to the surrounding annulus. While the conical geometry of the tympanic membrane is critical to the sound propagation in the auditory system, it presents significant challenges to the study of the 3D microstructure of the tympanic membrane using traditional 2D imaging techniques. To date, most of our knowledge about the 3D microstructure and composition of tympanic membranes is built from 2D microscopic studies, which precludes an accurate understanding of the 3D microstructure, acoustic behaviors and biology of the tissue. Although the tympanic membrane has been reported to contain elastic fibers, the morphological characteristic of the elastic fibers and the spatial arrangement of the elastic fibers with the predominant collagen fibers have not been shown in images. We have developed a 3D imaging technique for the three-dimensional examination of the microstructure of the full thickness of the tympanic membranes in mice without requiring tissue dehydration and stain. We have also used this imaging technique to study the 3D arrangement of the collagen and elastic fibrillar network with the capillaries and cells in the pars tensa-annulus unit at a status close to the native. The most striking findings in the study are the discovery of the 3D form of the elastic and collagen network, and the close spatial relationships between the elastic fibers and the elongated fibroblasts in the tympanic membranes. The 3D imaging technique has enabled to show the 3D waveform contour of the collagen and elastic scaffold in the conical tympanic membrane. Given the close relationship among the acoustic properties, composition, 3D microstructure and geometry of tympanic membranes, the findings may advance the understanding of the structure—acoustic functionality of the tympanic membrane. The knowledge will also be very helpful in the development of advanced cellular therapeutic technologies and 3D printing techniques to restore damaged tympanic membranes to a status close to the native.

Multimodal microscopy for the simultaneous visualization of five different imaging modalities using a single light source

Optical microscopy has been widely used in biomedical research as it provides photophysical and photochemical information of the target in subcellular spatial resolution without requiring physical contact with the specimen. To obtain a deeper understanding of biological phenomena, several efforts have been expended to combine such optical imaging modalities into a single microscope system. However, the use of multiple light sources and detectors through separated beam paths renders previous systems extremely complicated or slow for in vivo imaging. Herein, we propose a novel high-speed multimodal optical microscope system that simultaneously visualizes five different microscopic contrasts, i.e., two-photon excitation, second-harmonic generation, backscattered light, near-infrared fluorescence, and fluorescence lifetime, using a single femtosecond pulsed laser. Our proposed system can visualize five modal images with a frame rate of 3.7 fps in real-time, thereby providing complementary optical information that enhances both structural and functional contrasts. This highly photon-efficient multimodal microscope system enables various properties of biological tissues to be assessed.

Label-free identification of human coronary atherosclerotic plaque based on a three-dimensional quantitative assessment of multiphoton microscopy images

The rupture of coronary atherosclerotic plaque (CAP) and the resulting intracoronary thrombosis account for most acute coronary syndromes. Thus, the early identification and risk assessment of CAP is crucial for timely medical intervention. In this study, we propose a quantitative and label-free method for human CAP identification using multiphoton microscopy (MPM) and three-dimensional (3D) image analysis techniques. By detecting the intrinsic MPM signals, the microstructures of collagen and elastin fibers within normal and CAP-lesioned human coronary artery walls were imaged. Using a 3D gray level co-occurrence matrix method and 3D weighted vector summation algorithm, quantitative indicators that characterize the spatial texture and orientation features of the fibers were extracted. We demonstrate that these indicators show superior accuracy and repeatability over 2D texture features in CAP discrimination. Furthermore, by combining the 3D microstructural indicators, a support vector machine model that classifies CAP from the normal arterial wall with an accuracy of >97% was established. In conjunction with advances in multiphoton endoscopy, the proposed method shows great potential in providing a quantitative, label-free, and real-time tool for the early identification and risk assessment of CAP in the future.

Imaging of muscle activity-induced morphometric changes in fibril network of myofascia by two-photon microscopy

Myofascia, deep fascia enveloping skeletal muscles, consists of abundant collagen and elastin fibres that play a key role in the transmission of muscular forces. However, understanding of biomechanical dynamics in myofascia remains very limited due to less quantitative and relevant approaches for in vivo examination. The purpose of this study was to evaluate the myofascial fibril structure by means of a quantitative approach using two-photon microscopy (TPM) imaging in combination with intravital staining of Evans blue dye (EBD), a far-red fluorescence dye, which potentially labels elastin. With focus on myofascia of the tibial anterior (TA) muscle, the fibril structure intravitally stained with EBD was observed at the depth level of collagen fibrous membrane above the muscle belly. The EBD-labelled fibril structure and orientation in myofascia indicated biomechanical responses to muscle activity and ageing. The orientation histograms of EBD-labelled fibrils were significantly modified depending upon the intensity of muscle activity and ageing. Moreover, the density of EBD-labelled fibrils in myofascia decreased with habitual exercise but increased with muscle immobilization or ageing. In particular, the diameter of EBD-labelled fibrils in aged mice was significantly higher. The orientation histograms of EBD-labelled fibrils after habitual exercise, muscle immobilization and ageing showed significant differences compared to control. Indeed, the histograms in bilateral TA myofascia of exercise mice made simple waveforms without multiple sharp peaks, whilst muscular immobilization or ageing significantly shifted a histogram with sustaining multiple sharp peaks. Therefore, the dynamics of fibre network with EBD fluorescence in response to the biomechanical environment possibly indicate functional tissue adaptation in myofascia. Furthermore, on the basis of the knowledge that neutrophil recruitment occurs locally in working muscles, we suggested the unique reconstruction mechanism involving neutrophilic elastase in the myofascial fibril structure. In addition to the elastolytic susceptibility of EBD-labelled fibrils, distinct immunoreactivities and activities of neutrophil elastase in the myofascia were observed after electric pulse stimulation-induced muscle contraction for 15 min. Our findings of EBD-labelled fibril dynamics in myofascia through quantitative approach using TPM imaging and intravital fluorescence labelling potentially brings new insights to examine muscle physiology and pathology.

Constitutive modeling using structural information on collagen fiber direction and dispersion in human superficial femoral artery specimens of different ages

Arterial mechanics plays an important role in vascular pathophysiology and repair, and advanced imaging can inform constitutive models of vascular behavior. We have measured the mechanical properties of 14 human superficial femoral arteries (SFAs) (age 12-70, mean 48±19 years) using planar biaxial extension, and determined the preferred collagen fiber direction and dispersion using multiphoton microscopy. The collagen fiber direction and dispersion were evaluated using second-harmonic generation imaging and modeled using bivariate von Mises distributions. The microstructures of elastin and collagen were assessed using two-photon fluorescence imaging and conventional bidirectional histology. The mechanical and structural data were used to describe the SFA mechanical behavior using two- and four-fiber family invariant-based constitutive models. Older SFAs were stiffer and mechanically more nonlinear than younger specimens. In the adventitia, collagen fibers were undulated and diagonally-oriented, while in the media, they were straight and circumferentially-oriented. The media was rich in collagen that surrounded the circumferentially-oriented smooth muscle cells, and the elastin was present primarily in the internal and external elastic laminae. Older SFAs had a more circumferential collagen fiber alignment, a decreased circumferential-radial fiber dispersion, but the same circumferential-longitudinal fiber dispersion as younger specimens. Both the two- and the four-fiber family constitutive models were able to capture the experimental data, and the fits were better for the four-fiber family formulation. Our data provide additional details on the SFA intramural structure and inform structurally-based constitutive models.

Review of the Techniques Used for Investigating the Role Elastin and Collagen Play in Arterial Wall Mechanics

The arterial wall is characterised by a complex microstructure that impacts the mechanical properties of the vascular tissue. The main components consist of collagen and elastin fibres, proteoglycans, Vascular Smooth Muscle Cells (VSMCs) and ground matrix. While VSMCs play a key role in the active mechanical response of arteries, collagen and elastin determine the passive mechanics. Several experimental methods have been designed to investigate the role of these structural proteins in determining the passive mechanics of the arterial wall. Microscopy imaging of load-free or fixed samples provides useful information on the structure-function coupling of the vascular tissue, and mechanical testing provides information on the mechanical role of collagen and elastin networks. However, when these techniques are used separately, they fail to provide a full picture of the arterial micromechanics. More recently, advances in imaging techniques have allowed combining both methods, thus dynamically imaging the sample while loaded in a pseudo-physiological way, and overcoming the limitation of using either of the two methods separately. The present review aims at describing the techniques currently available to researchers for the investigation of the arterial wall micromechanics. This review also aims to elucidate the current understanding of arterial mechanics and identify some research gaps.

Characterization of fibrillar collagen isoforms in infarcted mouse hearts using second harmonic generation imaging

We utilized collagen specific second harmonic generation (SHG) signatures coupled with correlative immunofluorescence imaging techniques to characterize collagen structural isoforms (type I and type III) in a murine model of myocardial infarction (MI). Tissue samples were imaged over a four week period using SHG, transmitted light microscopy and immunofluorescence imaging using fluorescently-labeled collagen antibodies. The post-mortem cardiac tissue imaging using SHG demonstrated a progressive increase in collagen deposition in the left ventricle (LV) post-MI. We were able to monitor structural morphology and LV remodeling parameters in terms of extent of LV dilation, stiffness and fiber dimensions in the infarcted myocardium.

Fast, large area multiphoton exoscope (FLAME) for macroscopic imaging with microscopic resolution of human skin

We introduce a compact, fast large area multiphoton exoscope (FLAME) system with enhanced molecular contrast for macroscopic imaging of human skin with microscopic resolution. A versatile imaging platform, FLAME combines optical and mechanical scanning mechanisms with deep learning image restoration to produce depth-resolved images that encompass sub-mm² to cm² scale areas of tissue within minutes and provide means for a comprehensive analysis of live or resected thick human skin tissue. The FLAME imaging platform, which expands on a design recently introduced by our group, also features time-resolved single photon counting detection to uniquely allow fast discrimination and 3D virtual staining of melanin. We demonstrate its performance and utility by fast ex vivo and in vivo imaging of human skin. With the ability to provide rapid access to depth resolved images of skin over cm² area and to generate 3D distribution maps of key sub-cellular skin components such as melanocytic dendrites and melanin, FLAME is ready to be translated into a clinical imaging tool for enhancing diagnosis accuracy, guiding therapy and understanding skin biology.

Quantifying stent-induced damage in coronary arteries by investigating mechanical and structural alterations

Vascular damage develops with diverging severity during and after percutaneous coronary intervention with stent placement and is the prevailing stimulus for in-stent restenosis. Previous work has failed to link mechanical data obtained in a realistic in vivo or in vitro environment with data collected during imaging processes. We investigated whether specimens of porcine right coronary arteries soften when indented with a stent strut shaped structure, and if the softening results from damage mechanisms inside the fibrillar collagen structure. To simulate the multiaxial loading scenario of a stented coronary artery, we developed the testing device 'LAESIO' that can measure differences in the stress-stretch behavior of the arterial wall before and after the indentation of a strut-like stamp. The testing protocol was optimized according to preliminary experiments, more specifically equilibrium and relaxation tests. After chemical fixation of the specimens and subsequent tissue clearing, we performed three-dimensional surface and second-harmonic generation scans on the deformed specimens. We analyzed and correlated the mechanical response with structural parameters of high-affected tissue located next to the stamp indentation and low-affected tissue beyond the injured area. The results reveal that damage mechanisms, like tissue compression as well as softening, fiber dispersion, and the lesion extent, are direction-dependent, and the severity of them is linked to the strut orientation, indentation pressure, and position. The findings highlight the need for further investigations by applying the proposed methods to human coronary arteries. Additional data and insights might help to incorporate the observed damage mechanisms into material models for finite element analyses to perform more accurate simulations of stent-implantations.

Multiphoton microscopy for pre-clinical evaluation of flow-diverter stents for treating aneurysms

BACKGROUND

Conventional histological analyses are the gold standard for the study of aneurysms and vascular pathologies in pre-clinical research. Over the past decade, in vivo and ex vivo imaging using multiphoton microscopy have emerged as powerful pre-clinical tools for detailed tissue analyses that can assess morphology, the extracellular matrix (ECM), cell density and vascularisation. Multiphoton microscopy allows for deeper tissue penetration with minor phototoxicity.

OBJECTIVE

The present study aimed to demonstrate the current status of multimodality imaging, including multiphoton microscopy, for detailed analyses of neo-endothelialisation and ECM evolution after flow-diverter stent (FDS) treatment in an experimental rabbit model of aneurysms.

METHODS

Multiphoton microscopy tools for assessing autofluorescence and second harmonic generation (SHG) signals from biological tissues were used to evaluate the endovascular treatment of intracranial aneurysms in an animal model of aneurysms (pig, rabbit). Results from multiphoton microscopy were compared to those from standard histology, electronic and bright field microscopy.

CONCLUSIONS

The present study describes novel evaluation modes based on multiphoton microscopy for visualising tissue morphology (e.g., collagen, elastin, and cells) to qualify and quantify the extent of neo-intimal formation of covered arteries and device integration into the arterial wall using a rabbit model of intracranial aneurysms treated with FDS.

Construction of vascular graft with circumferentially oriented microchannels for improving artery regeneration

Design and fabrication of scaffolds with three-dimensional (3D) topological cues inducing regeneration of the neo-tissue comparable to native one remains a major challenge in both scientific and clinical fields. Here, we developed a well-designed vascular graft with 3D highly interconnected and circumferentially oriented microchannels by using the sacrificial sugar microfiber leaching method. The microchannels structure was capable of promoting the migration, oriented arrangement, elongation, and the contractile phenotype expression of vascular smooth muscle cells (VSMCs) in vitro. After implantation into the rat aorta defect model, the microchannels in vascular grafts simultaneously improved the infiltration and aligned arrangement of VSMCs and the oriented deposition of extracellular matrix (ECM), as well as the recruitment and polarization of macrophages. These positive results also provided protection and support for ECs growth, and ultimately accelerated the endothelialization. Our research provides a new strategy for the fabrication of grafts with the capability of inducing arterial regeneration, which could be further extended to apply in preparing other kinds of oriented scaffolds aiming to guide oriented tissue in situ regeneration.

Advanced microscopy analysis of the micro-nanoscale architecture of human menisci

The complex inhomogeneous architecture of the human meniscal tissue at the micro and nano scale in the absence of artefacts introduced by sample treatments has not yet been fully revealed. The knowledge of the internal structure organization is essential to understand the mechanical functionality of the meniscus and its relationship with the tissue’s complex structure. In this work, we investigated human meniscal tissue structure using up-to-date non-invasive imaging techniques, based on multiphoton fluorescence and quantitative second harmonic generation microscopy complemented with Environmental Scanning Electron Microscopy measurements. Observations on 50 meniscal samples extracted from 6 human menisci (3 lateral and 3 medial) revealed fundamental features of structural morphology and allowed us to quantitatively describe the 3D organisation of elastin and collagen fibres bundles. 3D regular waves of collagen bundles are arranged in “honeycomb-like” cells that are comprised of pores surrounded by the collagen and elastin network at the micro-scale. This type of arrangement propagates from macro to the nanoscale.

Quantitative assessment of microenvironment characteristics and metabolic activity in glioma via multiphoton microscopy

Tumor microenvironment and metabolic activity in gliomas are the important biomarkers to evaluate the progression of gliomas. Many evidences have suggested that the targeting of metabolic activity and tumor microenvironment simultaneously can be more effective to take the tumor therapy. Therefore, the noninvasive, accurate assessment of tumor microenvironment and metabolic activity is quite important in clinical practice. Multiphoton microscopy (MPM), based on two-photon-excited fluorescence and second harmonic generation was performed on unstained glioma tissues. With our combined image analysis approaches, our research findings indicate that MPM is able to qualitatively and quantitatively describe the microenvironment characteristics in gliomas, such as collage deposition in extracellular matrix, lymphocyte infiltration and tumor angiogenesis, etc. Meanwhile, the metabolic activity can also be quantitatively evaluated by optical redox ratio, NADH and FAD intensity. With the microendoscope and fiberscope are portable, MPM technique can be used to perform in-vivo studies and clinical examinations in gliomas.

Automatic and label-free identification of blood vessels in gliomas using the combination of multiphoton microscopy and image analysis

Currently, the targeted treatment of tumor based on the tumor microenvironment is newly developed. Blood vessels are the key parts in the tumor microenvironment, which is taken as a new visible target for tumor therapy. Multiphoton microscopy (MPM), based on the second harmonic generation and two-photon excited fluorescence, is available to make the label-free analysis on the blood vessels in human gliomas. MPM can reveal the vascular morphological characteristics in gliomas, including vascular malformation, intense vascular proliferation, perivascular collagen deposition, perivascular lymphocytes aggregation and microvascular proliferation. In addition, the image analysis algorithms were developed to automatically calculate the perivascular collagen content, vascular cavity area, lumen area, wall area and vessel number. Thus, the vascular morphology, the perivascular collagen deposition and intense vascular proliferation degree can be further quantitatively characterized. Compared with the pathological analysis, the combination of MPM and image analysis has potential advantages in making a quantitative and qualitative analyzing on vascular morphology in glioma microenvironment. As micro-endoscope and two-photon fiberscope are technologically improved, this combined method will be a useful imaging way to make the real-time research on the targeting tumor microenvironment in gliomas.

In vivo identification of arteries and veins using two-photon excitation elastin autofluorescence

Distinguishing arteries from veins in vivo has a great significance in clinical practices and preclinical studies. Optical imaging methods such as two-photon microscopy can provide high-resolution morphological information of tissue and are therefore extremely suitable for imaging small blood vessels. However, few optical imaging methods allow in vivo identification of arteries and veins merely utilizing the autofluorescence signal of blood vessels. In this report, we found the arterial wall generates a remarkably stronger two-photon excitation autofluorescence (TPEA) signal compared with the venous wall based on BALB/c mice. According to histological analysis and fluorescence characteristic measurement, the contrast signal is confirmed to be from elastin fibers. Employing this unique feature, we propose an objective and effective artery-vein separation strategy that considers the presence of the elastin-TPEA border as the indicator of arteries. Using this strategy, the arterial and venous networks of the dorsal skin and cerebral cortex of BALB/c mice are demonstrated to be excellently mapped and accurately separated in vivo without depending on any exogenous contrast agent, empirical knowledge, and algorithm. This study may provide a novel technique for mapping arterial and venous networks for anatomic research as well as an extra aid to basic researches on the mechanism, diagnosis, and treatment of blood vessel-related diseases.

Elastic Fibers and Large Artery Mechanics in Animal Models of Development and Disease

Development of a closed circulatory system requires that large arteries adapt to the mechanical demands of high, pulsatile pressure. Elastin and collagen uniquely address these design criteria in the low and high stress regimes, resulting in a nonlinear mechanical response. Elastin is the core component of elastic fibers, which provide the artery wall with energy storage and recoil. The integrity of the elastic fiber network is affected by component insufficiency or disorganization, leading to an array of vascular pathologies and compromised mechanical behavior. In this review, we discuss how elastic fibers are formed and how they adapt in development and disease. We discuss elastic fiber contributions to arterial mechanical behavior and remodeling. We primarily present data from mouse models with elastic fiber deficiencies, but suggest that alternate small animal models may have unique experimental advantages and the potential to provide new insights. Advanced ultrastructural and biomechanical data are constantly being used to update computational models of arterial mechanics. We discuss the progression from early phenomenological models to microstructurally motivated strain energy functions for both collagen and elastic fiber networks. Although many current models individually account for arterial adaptation, complex geometries, and fluid-solid interactions (FSIs), future models will need to include an even greater number of factors and interactions in the complex system. Among these factors, we identify the need to revisit the role of time dependence and axial growth and remodeling in large artery mechanics, especially in cardiovascular diseases that affect the mechanical integrity of the elastic fibers.

Synchrotron-based visualization and segmentation of elastic lamellae in the mouse carotid artery during quasi-static pressure inflation

In computational aortic biomechanics, aortic and arterial tissue are typically modelled as a homogeneous layer, making abstraction not only of the layered structure of intima, media and adventitia but also of the microstructure that exists within these layers. Here, we present a novel method to visualize the microstructure of the tunica media along the entire circumference of the vessel. To that end, we developed a pressure-inflation device that is compatible with synchrotron-based phase-contrast imaging. Using freshly excised left common carotid arteries from n = 12 mice, we visualized how the lamellae and interlamellar layers inflate as the luminal pressure is increased from 0 to 120 mm Hg in quasi-static steps. A graph-based segmentation algorithm subsequently allowed us to automatically segment each of the three lamellae, resulting in a three-dimensional geometry that represents lamellae, interlamellar layers and adventitia at nine different pressure levels. Our results demonstrate that the three elastic lamellae unfold and stretch simultaneously as luminal pressure is increased. In the long term, we believe that the results presented in this work can be a first step towards a better understanding of the mechanics of the arterial microstructure.

Deep convolutional neural networks for segmenting 3D in vivo multiphoton images of vasculature in Alzheimer disease mouse models

The health and function of tissue rely on its vasculature network to provide reliable blood perfusion. Volumetric imaging approaches, such as multiphoton microscopy, are able to generate detailed 3D images of blood vessels that could contribute to our understanding of the role of vascular structure in normal physiology and in disease mechanisms. The segmentation of vessels, a core image analysis problem, is a bottleneck that has prevented the systematic comparison of 3D vascular architecture across experimental populations. We explored the use of convolutional neural networks to segment 3D vessels within volumetric in vivo images acquired by multiphoton microscopy. We evaluated different network architectures and machine learning techniques in the context of this segmentation problem. We show that our optimized convolutional neural network architecture with a customized loss function, which we call DeepVess, yielded a segmentation accuracy that was better than state-of-the-art methods, while also being orders of magnitude faster than the manual annotation. To explore the effects of aging and Alzheimer's disease on capillaries, we applied DeepVess to 3D images of cortical blood vessels in young and old mouse models of Alzheimer's disease and wild type littermates. We found little difference in the distribution of capillary diameter or tortuosity between these groups, but did note a decrease in the number of longer capillary segments (>75μm) in aged animals as compared to young, in both wild type and Alzheimer's disease mouse models.

Protocols for Culturing and Imaging a Human Ex Vivo Osteochondral Model for Cartilage Biomanufacturing Applications

Cartilage defects and diseases remain major clinical issues in orthopaedics. Biomanufacturing is now a tangible option for the delivery of bioscaffolds capable of regenerating the deficient cartilage tissue. However, several limitations of in vitro and experimental animal models pose serious challenges to the translation of preclinical findings into clinical practice. Ex vivo models are of great value for translating in vitro tissue engineered approaches into clinically relevant conditions. Our aim is to obtain a viable human osteochondral (OC) model to test hydrogel-based materials for cartilage repair. Here we describe a detailed step-by-step framework for the generation of human OC plugs, their culture in a perfusion device and the processing procedures for histological and advanced microscopy imaging. Our ex vivo OC model fulfils the following requirements: the model is metabolically stable for a relevant culture period of 4 weeks in a perfusion bioreactor, the processing procedures allowed for the analysis of 3 different tissues or materials (cartilage, bone and hydrogel) without compromising their integrity. We determined a protocol and the settings for a non-linear microscopy technique on label free sections. Furthermore, we established a clearing protocol to perform light sheet-based observations on the cartilage layer without the need for tedious and destructive histological procedures. Finally, we showed that our OC system is a clinically relevant in terms of cartilage regeneration potential. In conclusion, this OC model represents a valuable preclinical ex vivo tool for studying cartilage therapies, such as hydrogel-based bioscaffolds, and we envision it will reduce the number of animals needed for in vivo testing.

Fractal dimension and directional analysis of elastic and collagen fiber arrangement in unsectioned arterial tissues affected by atherosclerosis and aging

Structural proteins like collagen and elastin are major constituents of the extracellular matrix (ECM). ECM degradation and remodeling in diseases significantly impact the microorganization of these structural proteins. Therefore, tracking the changes of collagen and elastin fiber morphological features within ECM impacted by disease progression could provide valuable insight into pathological processes such as tissue fibrosis and atherosclerosis. Benefiting from its intrinsic high-resolution imaging power and superior biochemical specificity, nonlinear optical microscopy (NLOM) is capable of providing information critical to the understanding of ECM remodeling. In this study, alterations of structural fibrillar proteins such as collagen and elastin in arteries excised from atherosclerotic rabbits were assessed by the combination of NLOM images and textural analysis methods such as fractal dimension (FD) and directional analysis (DA). FD and DA were tested for their performance in tracking the changes of extracellular elastin and fibrillar collagen remodeling resulting from atherosclerosis progression/aging. Although other methods of image analysis to study the organization of elastin and collagen structures have been reported, the simplified calculations of FD and DA presented in this work prove that they are viable strategies for extracting and analyzing fiber-related morphology from disease-impacted tissues. Furthermore, this study also demonstrates the potential utility of FD and DA in studying ECM remodeling caused by other pathological processes such as respiratory diseases, several skin conditions, or even cancer. NEW & NOTEWORTHY Textural analyses such as fractal dimension (FD) and directional analysis (DA) are straightforward and computationally viable strategies to extract fiber-related morphological data from optical images. Therefore, objective, quantitative, and automated characterization of protein fiber morphology in extracellular matrix can be realized by using these methods in combination with digital imaging techniques such as nonlinear optical microscopy (NLOM), a highly effective visualization tool for fibrillar collagen and elastic network. Combining FD and DA with NLOM is an innovative approach to track alterations of structural fibrillar proteins. The results illustrated in this study not only prove the effectiveness of FD and DA methods in extracellular protein characterization but also demonstrate their potential value in clinical and basic biomedical research where protein microstructure characterization is critical.

Improved label-free diagnostics and pathological assessment of atherosclerotic plaques through nonlinear microscopy

Coronary heart disease is the most common type of heart disease caused by atherosclerosis. In fact, an arterial wall lesion centered on the accumulation of cholesterol-rich lipids and the accompanying inflammatory response generates a plaque, whose rupture may result in a thrombus with fatal consequences. Plaque characterization for assessing the severity of atherosclerosis is generally performed through standard histopathological examination based on hematoxylin/eosin staining, which is operator-dependent and requires relatively long procedures. In this framework, nonlinear optical microscopy is a valid, label-free alternative to standard diagnostic methods. We combined second-harmonic generation (SHG), two-photon excited fluorescence (TPEF) and fluorescence lifetime imaging microscopy in a multimodal scheme for obtaining morphological and molecular information on human carotid ex vivo specimens affected by atherosclerosis. In this study, discrimination between different tissues within the atherosclerotic plaque was achieved based on both lifetime, TPEF-to-SHG ratio, and image pattern analysis. The presented methodology aims to be a starting point for future fully automated and fast characterization of atherosclerotic biopsies; moreover, it could be extended to the study of other tissues and pathologies. Combined TPEF/SHG mapping of a carotid specimen affected by atherosclerosis.

Micromechanics of elastic lamellae: unravelling the role of structural inhomogeneity in multi-scale arterial mechanics

Microstructural deformation of elastic lamellae plays important roles in maintaining arterial tissue homeostasis and regulating vascular smooth muscle cell fate. Our study unravels the underlying microstructural origin that enables elastic lamellar layers to evenly distribute the stresses through the arterial wall caused by intraluminal distending pressure, a fundamental requirement for tissue and cellular function. A new experimental approach was developed to quantify the spatial organization and unfolding of elastic lamellar layers under pressurization in mouse carotid arteries by coupling physiological extension-inflation and multiphoton imaging. Tissue-level circumferential stretch was obtained from analysis of the deformation of a thick-walled cylinder. Our results show that the unfolding and extension of lamellar layers contribute simultaneously to tissue-level deformation. The inner lamellar layers are wavier and unfold more than the outer layers. This waviness gradient compensates the larger tissue circumferential stretch experienced at the inner surface, thus equalizing lamellar layer extension through the arterial wall. Discoveries from this study reveal the importance of structural inhomogeneity in maintaining tissue homeostasis through the arterial wall, and may have profound implications on vascular remodelling in aging and diseases, as well as in tissue engineering of functional blood vessels.

Dermal fiber structures and photoaging

The use of multiphoton imaging has become a standard technique to visualize the dermis fibers as it requires no specific staining. The density and organization of collagen and elastin are common markers of skin intrinsic aging and photoaging; thus, there is a need of grading this skin aging with quantitative indicators able to provide a robust evaluation of the dermis fibers' state. We propose a systematic analysis of multiphoton images of skin biopsies taken on the buttock and the forearm of patients of different ages. The intensity histograms of images were analyzed through their moments, a wavelet decomposition was done, and the wavelet coefficients distribution was fitted by a generalized Gaussian distribution. Different parameters relative to the collagen or elastin densities, organizations, and structures were calculated and exhibit phenomena specific to intrinsic or extrinsic aging. Those indicators could become a standard method to analyze the degree of skin aging (intrinsic or extrinsic) through multiphoton imaging.

Biofabrication of human articular cartilage: a path towards the development of a clinical treatment

Cartilage injuries cause pain and loss of function, and if severe may result in osteoarthritis (OA). 3D bioprinting is now a tangible option for the delivery of bioscaffolds capable of regenerating the deficient cartilage tissue. Our team has developed a handheld device, the Biopen, to allow in situ additive manufacturing during surgery. Given its ability to extrude in a core/shell manner, the Biopen can preserve cell viability during the biofabrication process, and it is currently the only biofabrication tool tested as a surgical instrument in a sheep model using homologous stem cells. As a necessary step toward the development of a clinically relevant protocol, we aimed to demonstrate that our handheld extrusion device can successfully be used for the biofabrication of human cartilage. Therefore, this study is a required step for the development of a surgical treatment in human patients. In this work we specifically used human adipose derived mesenchymal stem cells (hADSCs), harvested from the infra-patellar fat pad of donor patients affected by OA, to also prove that they can be utilized as the source of cells for the future clinical application. With the Biopen, we generated bioscaffolds made of hADSCs laden in gelatin methacrylate, hyaluronic acid methacrylate and cultured in the presence of chondrogenic stimuli for eight weeks in vitro. A comprehensive characterisation including gene and protein expression analyses, immunohistology, confocal microscopy, second harmonic generation, light sheet imaging, atomic force mycroscopy and mechanical unconfined compression demonstrated that our strategy resulted in human hyaline-like cartilage formation. Our in situ biofabrication approach represents an innovation with important implications for customizing cartilage repair in patients with cartilage injuries and OA.

Chemical imaging of fresh vascular smooth muscle cell response by epi-detected stimulated Raman scattering

An understanding of deformation of cardiovascular tissue under hemodynamic load is crucial for understanding the health and disease of blood vessels. In the present work, an epi-detected stimulated Raman scattering (epi-SRS) imaging platform was designed for in situ functional imaging of vascular smooth muscle cells (VMSCs) in fresh coronary arteries. For the first time, the pressure-induced morphological deformation of fresh VSMCs was imaged with no fixation and in a label-free manner. The relation between the loading pressure and the morphological parameters, including angle and length of the VSMCs, were apparent. The morphological responses of VMSCs to drug treatment were also explored, to demonstrate the capability of functional imaging for VSMCs by this method. The time-course imaging revealed the drug induced change in angle and length of VSMCs. The present study provides a better understanding of the biomechanical framework of blood vessels, as well as their responses to external stimulations, which are fundamental for developing new strategies for cardiovascular disease treatment.

Label-free imaging of atherosclerotic plaques using third-harmonic generation microscopy

Multiphoton microscopy using laser sources in the mid-infrared range (MIR, 1,300 nm and 1,700 nm) was used to image atherosclerotic plaques from murine and human samples. Third harmonic generation (THG) from atherosclerotic plaques revealed morphological details of cellular and extracellular lipid deposits. Simultaneous nonlinear optical signals from the same laser source, including second harmonic generation and endogenous fluorescence, resulted in label-free images of various layers within the diseased vessel wall. The THG signal adds an endogenous contrast mechanism with a practical degree of specificity for atherosclerotic plaques that complements current nonlinear optical methods for the investigation of cardiovascular disease. Our use of whole-mount tissue and backward scattered epi-detection suggests THG could potentially be used in the future as a clinical tool.

Non-linear optical microscopy as a novel quantitative and label-free imaging modality to improve the assessment of tissue-engineered cartilage

OBJECTIVE

Current systems to evaluate outcomes from tissue-engineered cartilage (TEC) are sub-optimal. The main purpose of our study was to demonstrate the use of second harmonic generation (SHG) microscopy as a novel quantitative approach to assess collagen deposition in laboratory made cartilage constructs.

METHODS

Scaffold-free cartilage constructs were obtained by condensation of in vitro expanded Hoffa's fat pad derived stromal cells (HFPSCs), incubated in the presence or absence of chondrogenic growth factors (GF) during a period of 21 d. Cartilage-like features in constructs were assessed by Alcian blue staining, transmission electron microscopy (TEM), SHG and two-photon excited fluorescence microscopy. A new scoring system, using second harmonic generation microscopy (SHGM) index for collagen density and distribution, was adapted to the existing "Bern score" in order to evaluate in vitro TEC.

RESULTS

Spheroids with GF gave a relative high Bern score value due to appropriate cell morphology, cell density, tissue-like features and proteoglycan content, whereas spheroids without GF did not. However, both TEM and SHGM revealed striking differences between the collagen framework in the spheroids and native cartilage. Spheroids required a four-fold increase in laser power to visualize the collagen matrix by SHGM compared to native cartilage. Additionally, collagen distribution, determined as the area of tissue generating SHG signal, was higher in spheroids with GF than without GF, but lower than in native cartilage.

CONCLUSION

SHG represents a reliable quantitative approach to assess collagen deposition in laboratory engineered cartilage, and may be applied to improve currently established scoring systems.

Microstructure-based constitutive model of coronary artery with active smooth muscle contraction

Currently, there is no full three-dimensional (3D) microstructural mechanical model of coronary artery based on measured microstructure including elastin, collagen and smooth muscle cells. Many structural models employ mean values of vessel microstructure, rather than continuous distributions of microstructure, to predict the mechanical properties of blood vessels. Although some models show good agreements on macroscopic vessel responses, they result in a lower elastin stiffness and earlier collagen recruitment. Hence, a full microstructural constitutive model is required for better understanding vascular biomechanics in health and disease. Here, a 3D microstructural model that accounts for all constituent microstructure is proposed to predict macroscopic and microscopic responses of coronary arteries. Coronary artery microstructural parameters were determined based on previous statistical measurements while mechanical testing of arteries (n = 5) were performed in this study to validate the computational predictions. The proposed model not only provides predictions of active and passive stress distributions of vessel wall, but also enables reliable estimations of material parameters of individual fibers and cells and thus predicts microstructural stresses. The validated microstructural model of coronary artery sheds light on vascular biomechanics and can be extend to diseased vessels for better understanding of initiation, progression and clinical treatment of vascular disease.

A comprehensive study of layer-specific morphological changes in the microstructure of carotid arteries under uniaxial load

The load bearing properties of large blood vessels are principally conferred by collagen and elastin networks and their microstructural organization plays an important role in the outcomes of various arterial pathologies. In particular, these fibrous networks are able to rearrange and reorient spatially during mechanical deformations. In this study, we investigate for the first time whether these well-known morphological rearrangements are the same across the whole thickness of blood vessels, and subsequently if the underlying mechanisms that govern these rearrangements can be predicted using affine kinematics. To this aim, we submitted rabbit carotid samples to uniaxial load in three distinct deformation directions, while recording live images of the 3D microstructure using multiphoton microscopy. Our results show that the observed realignment of collagen and elastin in the media layer, along with elastin of the adventitia layer, remained limited to small angles that can be predicted by affine kinematics. We show also that collagen bundles of fibers in the adventitia layer behaved in significantly different fashion. They showed a remarkable capacity to realign in the direction of the load, whatever the loading direction. Measured reorientation angles of the fibers were significantly higher than affine predictions. This remarkable property of collagen bundles in the adventitia was never observed before, it shows that the medium surrounding collagen in the adventitia undergoes complex deformations challenging traditional hyperelastic models based on mixture theories.

STATEMENT OF SIGNIFICANCE

The biomechanical properties of arteries are conferred by the rearrangement under load of the collagen and elastin fibers making up the arterial microstructure. Their kinematics under deformation is not yet characterized for all fiber networks. In this respect we have submitted samples of arterial tissue to uniaxial tension, simultaneously to confocal imaging of their microstructure. Our method allowed identifying for the first time the remarkable ability of adventitial collagen fibers to reorient in the direction of the load, achieving reorientation rotations that exceeded those predicted by affine kinematics, while all other networks followed the affine kinematics. Our results highlight new properties of the microstructure, which might play a role in the outcomes of vascular pathologies like aneurysms.

Context-dependent intravital imaging of therapeutic response using intramolecular FRET biosensors

Intravital microscopy represents a more physiologically relevant method for assessing therapeutic response. However, the movement into an in vivo setting brings with it several additional considerations, the primary being the context in which drug activity is assessed. Microenvironmental factors, such as hypoxia, pH, fibrosis, immune infiltration and stromal interactions have all been shown to have pronounced effects on drug activity in a more complex setting, which is often lost in simpler two- or three-dimensional assays. Here we present a practical guide for the application of intravital microscopy, looking at the available fluorescent reporters and their respective expression systems and analysis considerations. Moving in vivo, we also discuss the microscopy set up and methods available for overlaying microenvironmental context to the experimental readouts. This enables a smooth transition into applying higher fidelity intravital imaging to improve the drug discovery process.

Tracking delivery of a drug surrogate in the porcine heart using photoacoustic imaging and spectroscopy

Although the drug-eluting stent (DES) has dramatically reduced the rate of coronary restenosis, it still occurs in up to 20% of patients with a DES. Monitoring drug delivery could be one way to decrease restenosis rates. We demonstrate real-time photoacoustic imaging and spectroscopy (PAIS) using a wavelength-tunable visible laser and clinical ultrasound scanner to track cardiac drug delivery. The photoacoustic signal was initially calibrated using porcine myocardial samples soaked with a known concentration of a drug surrogate (DiI). Next, an in situ coronary artery was perfused with DiI for 20 min and imaged to monitor dye transport in the tissue. Finally, a partially DiI-coated stent was inserted into the porcine brachiocephalic trunk for imaging. The photoacoustic signal was proportional to the DiI concentration between 2.4 and 120 ?? ? g / ml , and the dye was detected over 1.5 mm from the targeted coronary vessel. Photoacoustic imaging was also able to differentiate the DiI-coated portion of the stent from the uncoated region. These results suggest that PAIS can track drug delivery to cardiac tissue and detect drugs loaded onto a stent with sub-mm precision. Future work using PAIS may help improve DES design and reduce the probability of restenosis.