Glucose recognition by a supramolecular complex of boronic acid fluorophore with boronic acid-modified cyclodextrin in water

Cyclodextrin Host-Guest Recognition in Glucose-Monitoring Sensors

Diabetes mellitus is a prevalent chronic health condition that has caused millions of deaths worldwide. Monitoring blood glucose levels is crucial in diabetes management, aiding in clinical decision making and reducing the incidence of hypoglycemic episodes, thereby decreasing morbidity and mortality rates. Despite advancements in glucose monitoring (GM), the development of noninvasive, rapid, accurate, sensitive, selective, and stable systems for continuous monitoring remains a challenge. Addressing these challenges is critical to improving the clinical utility of GM technologies in diabetes management. In this concept, cyclodextrins (CDs) can be instrumental in the development of GM systems due to their high supramolecular recognition capabilities based on the host-guest interaction. The introduction of CDs into GM systems not only impacts the sensitivity, selectivity, and detection limit of the monitoring process but also improves biocompatibility and stability. These findings motivated the current review to provide a comprehensive summary of CD-based blood glucose sensors and their chemistry of glucose detection, efficiency, and accuracy. We categorize CD-based sensors into four groups based on their modification strategies, including CD-modified boronic acid, CD-modified mediators, CD-modified nanoparticles, and CD-modified functionalized polymers. These findings shed light on the potential of CD-based sensors as a promising tool for continuous GM in diabetes mellitus management.

Marcus model-based analysis of the photo-quenching mechanism of a boronic acid fluorophore: water concentration dependence of electron transfer rate

The photo-quenching mechanism of 2-(4-phenylboronic acid)-1-pyrenemethamide (C1-APB), which has potential application as a saccharide-recognition sensor, was investigated. By performing temperature-dependent time-resolved photoluminescence measurements, we determined the mechanism responsible for the photo-quenching properties of C1-APB to be a photoinduced electron transfer (PET). Moreover, the dependence of the electron transfer rate (k_PET) on the solvent water concentration was explored in detail, and it was found that k_PET increased by many orders of magnitude with increasing water concentrations. This phenomenon was analyzed using the Marcus model, in which the electron transfer can be represented by a potential diagram involving the potential barrier (ΔG_a) and frequency factor (A). With the aid of temperature-dependent measurements, the contribution of ΔG_a and A to the increase in k_PET was successfully analyzed independently, which allowed us to discuss the effect of water molecule orientation and change in molecular structure of C1-APB. The temperature-dependence measurements performed in this study offer a powerful research tool for investigating the PET process, and will contribute to the development of molecular recognition fluorescent sensors.

Molecular Probes, Chemosensors, and Nanosensors for Optical Detection of Biorelevant Molecules and Ions in Aqueous Media and Biofluids

Synthetic molecular probes, chemosensors, and nanosensors used in combination with innovative assay protocols hold great potential for the development of robust, low-cost, and fast-responding sensors that are applicable in biofluids (urine, blood, and saliva). Particularly, the development of sensors for metabolites, neurotransmitters, drugs, and inorganic ions is highly desirable due to a lack of suitable biosensors. In addition, the monitoring and analysis of metabolic and signaling networks in cells and organisms by optical probes and chemosensors is becoming increasingly important in molecular biology and medicine. Thus, new perspectives for personalized diagnostics, theranostics, and biochemical/medical research will be unlocked when standing limitations of artificial binders and receptors are overcome. In this review, we survey synthetic sensing systems that have promising (future) application potential for the detection of small molecules, cations, and anions in aqueous media and biofluids. Special attention was given to sensing systems that provide a readily measurable optical signal through dynamic covalent chemistry, supramolecular host-guest interactions, or nanoparticles featuring plasmonic effects. This review shall also enable the reader to evaluate the current performance of molecular probes, chemosensors, and nanosensors in terms of sensitivity and selectivity with respect to practical requirement, and thereby inspiring new ideas for the development of further advanced systems.

Surface Engineered PLGA Nanoparticle for Threshold Responsive Glucose Monitoring and "Self-Programmed" Insulin Delivery

We have developed a reversible, biocompatible, "self-programmed" PLGA [poly(lactic-co-glycolic acid)] nanoparticle-based optical biosensor capable of sensing and continuous monitoring of glucose above the physiologically relevant threshold value (100-125 mg/dL) as well as "on-demand" insulin delivery via an "On-Off" technique. We have carefully surface engineered the PLGA nanoparticle using amino dextran-fluorescein (A-DexFl) and amino-phenyl boronic acid (A-PBA) to exploit the binding affinity of boronic acids with that of cis-1,2 diols of dextran/glucose. Initially, the dextran chains wrap the nanoparticle surface due to its high affinity toward A-PBA (K_b = 6.1 × 10⁶ M^-1). The close proximity of the fluorophores with that of A-PBA quenches the fluorescence, resulting in an "Off" state. On the addition of glucose, it competes with A-DexFl to bind with A-PBA. Above a certain threshold concentration of glucose, the binding affinity overcomes (K_b = 6.3 × 10⁷ M^-1) the dextran-A-PBA binding. This opens-up the wrapped A-DexFl chains from the nanoparticle surface and results in an increased distance between the fluorophore and A-PBA, triggering the "On" state. The activation of the On-Off state can be finely tuned in the desired range of physiologically relevant glucose concentrations by varying the ligand ratios on the PLGA surface. The nanoparticle core has also been used as an insulin reservoir to trigger the drug release in the "On" state. We have obtained ∼53% encapsulation efficiency and ∼20% loading efficiency for insulin loading. Once the glucose concentration falls beyond the detection range, the dextran chains collapse on the nanoparticle surface with a suspension in drug release. The process is solely controlled by the competition and multivalent binding affinity between glucose, A-DexFl, and A-PBA, which allows it to be "self-programmed" and "self-regulated" with continuous monitoring up to 8-10 cycles over a 72 h time period. A sustained drug release has been found with ∼70% of released drug over a period of 72 h, although this release is insignificant in the absence of glucose. Several control experiments have been performed to optimize the sensor design.

Effect of Spacer Length in Pyrene-Modified-Phenylboronic Acid Probe/CyD Complexes on Fluorescence-based Recognition of Monosaccharides in Aqueous Solution

The chemical sensing of saccharides is of importance for the diagnosis of diabetes. Various enzymatic sensors have been developed, but their heat and pH instability issues need to be resolved. In this regard, the development of artificial saccharide sensors with high stability is attracting attention. We have designed a heat- and pH-stable supramolecular inclusion complex system composed of cyclodextrin (CyD) as a host and a phenylboronic acid (PB) probe possessing pyrene as a fluorescent guest. Several probes possessing alkyl spacers having various lengths between the PB and the pyrene moiety, Cn-APB (n = 1 - 4), were newly synthesized and evaluated with respect to their monosaccharide recognition ability on the basis of the fluorescence response through the cyclic esterification of monosaccharide and PB. These Cn-APB/CyD supramolecular inclusion complexes have exhibited a selective fluorescence response towards fructose in aqueous solution based on the photo-induced electron transfer mechanism. The spacer length of the alkyl group in Cn-APB significantly affects the affinity for saccharides. With respect to the complex between C4-APB and PB-modified CyD (3-PB-γ-CyD), it was found that the supramolecular inclusion complexes had high selectivity for glucose with significant fluorescence enhancement. These results indicate that the lengths of the alkyl spacers in the probe molecules are important to control the recognition of saccharides in aqueous solution.

Supramolecular Zn(II)-Dipicolylamine-Azobenzene-Aminocyclodextrin-ATP Complex: Design and ATP Recognition in Water

Cyclodextrins (CyDs) are water-soluble host molecules possessing a nanosized hydrophobic cavity. In the realm of molecular recognition, this cavity is used not only as a recognition site but also as a reaction medium, where a hydrophobic sensor recognizes a guest molecule. Based on the latter concept, we have designed a novel supramolecular sensing system composed of Zn(II)-dipicolylamine metal complex-based azobenzene (1-Zn) and 3A-amino-3A-deoxy-(2AS,3AS)-γ-cyclodextrin (3-NH₂-γ-CyD) for sensing adenosine-5′-triphosphate (ATP). 1-Zn showed redshifts in the UV-Vis spectra and induced circular dichroism (ICD) only when both ATP and 3-NH₂-γ-CyD were present. Calculations of equilibrium constants indicated that the amino group of 3-NH₂-γ-CyD was involved in the formation of supramolecular 1-Zn/3-NH₂-γ-CyD/ATP. The Job plot of the ICD spectral response revealed that the stoichiometry of 1-Zn/3-NH₂-γ-CyD/ATP was 2:1:1. The pH effect was examined and 1-Zn/3-NH₂-γ-CyD/ATP was most stable in the neutral condition. The NOESY spectrum suggested the localization of 1-Zn in the 3-NH₂-γ-CyD cavity. Based on the obtained results, the metal coordination interaction of 1-Zn and the electrostatic interaction of 3-NH₂-γ-CyD were found to take place for ATP recognition. The “reaction medium approach” enabled us to develop a supramolecular sensing system that undergoes multi-point interactions in water. This study is the first step in the design of a selective sensing system based on a good understanding of supramolecular structures.

Electrochemical Sensing of Adenosin Triphosphate by Specific Binding to Dipicolylamine Group in Cyclodextrin Supramolecular Complex

Electrochemical detection based on cyclodextrin supramolecular complexes is founded on the competitive binding between electroactive probes and target molecules. This limits their versatility to be used for sensing a broad range of metabolites. In this work, we demonstrate the significant role of zinc ions as well as of β-cyclodextrins modified with dipicolylamine and of a phenylboronic acid-modified ferrocene probe to address a selective electrochemical detection of adenosin triphosphate (ATP). Our findings will definitively have an impact in oncological point-of-care systems, since a high level of extracellular ATP reveals the inflammatory response due to chemotherapeutic treatments.

Electrochemical Assay for Extremely Selective Recognition of Fructose Based on 4-Ferrocene-Phenylboronic Acid Probe and β-Cyclodextrins Supramolecular Complex

The aim of the present paper is to highlight a novel electrochemical assay for an extremely-selective detection of fructose thanks to the use of a supramolecular complex between β-cyclodextrins (β-CDs) and a chemically modified ferrocene with boronic acid named 4-Fc-PB/natural-β-CDs. Another kind of β-CDs, the 4-Fc-PB/3-phenylboronic-β-CDs, is proposed for the detection of glucose. The novel electrochemical probe is fully characterized by ¹ H nuclear magnetic resonance, mass spectroscopy, and elemental analysis, while the superior electrochemical performance is assessed in terms of sensitivity and detection limit. The novelty of the present work consists in the role of CDs that for the first time are employed in electrochemistry with a unique detection mechanism based on specific chemical interactions with the target molecule by the introduction of proper binding groups. A highly selective detection of fructose is obtained and it is believed that the proposed mechanism of detection represents a new way to electrochemically sense other molecules by varying the combination of specific groups of the supramolecular complex. The findings are of impactful importance since a quick, easy, cheap, and extremely selective detection of fructose is not yet available in the market, here achieved by using electrochemical methods which are a very growing field.

An Optimised Di-Boronate-ChemMatrix Affinity Chromatography to Trap Deoxyfructosylated Peptides as Biomarkers of Glycation

We report herein a novel ChemMatrix® Rink resin functionalised with two phenylboronate (PhB) moieties linked on the N-α and N-ε amino functions of a lysine residue to specifically capture deoxyfructosylated peptides, compared to differently glycosylated peptides in complex mixtures. The new PhB-Lys(PhB)-ChemMatrix® Rink resin allows for exploitation of the previously demonstrated ability of cis diols to form phenylboronic esters. The optimised capturing and cleavage procedure from the novel functionalised resin showed that only the peptides containing deoxyfructosyl-lysine moieties can be efficiently and specifically detected by HR-MS and MS/MS experiments. We also investigated the high-selective affinity to deoxyfructosylated peptides in an ad hoc mixture containing unique synthetic non-modified peptides and in the hydrolysates of human and bovine serum albumin as complex peptide mixtures. We demonstrated that the deoxyfructopyranosyl moiety on lysine residues is crucial in the capturing reaction. Therefore, the novel specifically-designed PhB-Lys(PhB)-ChemMatrix® Rink resin, which has the highest affinity to deoxyfructosylated peptides, is a candidate to quantitatively separate early glycation peptides from complex mixtures to investigate their role in diabetes complications in the clinics.

Phosphate-sensing with (di-(2-picolyl)amino)quinazolines based on a fluorescence on–off system

Detection and visualization of phosphates such as ATP in living organisms can facilitate the elucidation of various biological events. Although substantial efforts had been made in this area, present methods have disadvantages such as the need for specialized equipment and poor sensitivities. To address these limitations, novel fluorescent probes, (di-(2-picolyl)amino)quinazolines, were developed for application in ATP detection. They selectively recognized copper ions by fluorescence quenching, and their copper complexes displayed fluorescence enhancement in the presence of phosphoric acid derivatives. This fluorescence on–off system enabled highly sensitive fluorescence detection of ATP when combined with a phenyl boronic acid-modified γ-cyclodextrin through a plausible multipoint recognition system.

Supramolecular probe Cu-dpa-QZ2/FPB-γ-CyD recognized ATP with high sensitivity.

Selective Sugar Recognition by Anthracene-Type Boronic Acid Fluorophore/Cyclodextrin Supramolecular Complex Under Physiological pH Condition

We synthesized novel PET (photoinduced electron transfer)-type fluorescence glucose probe 1 [(4-(anthracen-2-yl-carbamoyl)-3-fluorophenyl)boronic acid], which has a phenylboronic acid (PBA) moiety as the recognition site and anthracene as the fluorescent part. Although the PBA derivatives dissociate and bind with sugar in the basic condition, our new fluorescent probe can recognize sugars in the physiological pH by introducing an electron-withdrawing fluorine group into the PBA moiety. As a result, the pK _a value of this fluorescent probe was lowered and the probe was able to recognize sugars at the physiological pH of 7.4. The sensor was found to produce two types of fluorescent signals, monomer fluorescence and dimer fluorescence, by forming a supramolecular 2:1 complex of 1 with glucose inside a γ-cyclodextrin (γ-CyD) cavity. Selective ratiometric sensing of glucose by the 1/γ-CyD complex was achieved in water at physiological pH.

A Solubility-based Separation of Group B Soyasaponins from the Whole Soybean Flour

This note describes a simple and rapid method to separate specific soyasaponins, including the major and multi-functional bioactive species soyasaponin Bb, from the whole soybean flour. The method is based on the difference in solubility of the soyasaponins and other components in methanol, aqueous borax solution, and 1-octanol. First, the whole soybean flour was mixed with methanol to extract hydrophobic components, and the methanol solution was concentrated. Second, the methanol solution was mixed with a larger volume of aqueous borax solution, and the supernatant was acidified to obtain a precipitate. The precipitate was found to be containing mainly four group B soyasaponins. Two of those are non-conjugated molecules, soyasaponins Bb and Bc, and the other two are 2,3-dihydro-2,5-dihydroxy-6-methyl-4H-pyran-4-one conjugated ones, soyasaponins βg and βa. All of them have two cis-diol groups in their structure. Therefore, although they are fundamentally insoluble in water, they became soluble in the aqueous medium in the form of divalent anionic species by the borate ester formation, and that they were re-precipitated by the hydrolysis. Furthermore, the non-conjugated group B soyasaponins could be separated by washing with 1-octanol to remove highly hydrophobic soyasaponins βg and βa. The solubility-based technique would be useful as pretreatment in the purification of these group B soyasaponins.

Metal and Phosphate Ion Recognition Using Dipicolylamine-modified Fluorescent Silica Nanoparticles

Dipicolylamine-modified fluorescent silica nanoparticles were prepared by introducing dipicolylamine to the surface of silica nanoparticles possessing terminal amines. We examined the selectivities of dipicolylamine-hydroxycoumarin carbonate (dpa-HCC) and dpa-HCC/fluorescent silica nanoparticles (FSiNP) for metal ions and phosphate anions. The dipicolylamine-modified silica nanoparticles responded to PPi, Tri and Pb²⁺, indicating novel selectivity derived from the assembly effect of dpa-HCC on the silica nanoparticle surface. Surface-modified fluorescent silica nanoparticles are expected to be used as a sensor for environmental and biological applications.

Development of Dipicolylamine-Modified Cyclodextrins for the Design of Selective Guest-Responsive Receptors for ATP

The construction of supramolecular recognition systems based on specific host–guest interactions has been studied in order to design selective chemical sensors. In this study, guest-responsive receptors for ATP have been designed with cyclodextrins (CyDs) as a basic prototype of the turn-on type fluorescent indicator. We synthesized dipicolylamine (DPA)-modified CyD–Cu²⁺ complexes (Cu·1α, Cu·1β, and Cu·1γ), and evaluated their recognition capabilities toward phosphoric acid derivatives in water. The UV-Vis absorption and fluorescence spectra revealed that Cu·1β selectively recognized ATP over other organic and inorganic phosphates, and that β-CyD had the most suitable cavity size for complexation with ATP. The 1D and 2D NMR analyses suggested that the ATP recognition was based on the host–guest interaction between the adenine moiety of ATP and the CyD cavity, as well as the recognition of phosphoric moieties by the Cu²⁺–DPA complex site. The specific interactions between the CyD cavity and the nucleobases enabled us to distinguish ATP from other nucleoside triphosphates, such as guanosine triphosphate (GTP), uridine triphosphate (UTP), and cytidine triphosphate (CTP). This study clarified the basic mechanisms of molecular recognition by modified CyDs, and suggested the potential for further application of CyDs in the design of highly selective supramolecular recognition systems for certain molecular targets in water.

Development of Supramolecular Saccharide Sensors Based on Cyclodextrin Complexes and Self-assembling Systems

Cyclodextrins (CDs) are water-soluble host compounds having nano-size hydrophobic cavities that enable them to incorporate organic molecules in water. Optically inert CDs can be efficiently combined with various types of chromoionophores and fluoroionophores. In this study, using diverse combinations of phenylboronic acid fluorescent sensors and azoprobes with CDs, the unique saccharide recognition functions of CD, chemically modified CD, and CD gel complexes based on their synergistic function are clarified, thereby confirming their use as supramolecular saccharide sensors. To realize novel supramolecular chirality, the twisted structure of two ditopic azoprobes inside the γ-CD chiral cavity is controlled by multi-point recognition of guest ions in water. As different types of supramolecular saccharide sensors, phenylboronic acid-based self-assembling systems are also reviewed.

Design and Function of Supramolecular Recognition Systems Based on Guest-Targeting Probe-Modified Cyclodextrin Receptors for ATP

In this study, we have developed a rational design strategy to obtain highly selective supramolecular recognition systems of cyclodextrins (CyDs) on the basis of the lock and key principle. We designed and synthesized dipicolylamine (dpa)-modified γ-CyD-Cu²⁺ complexes possessing an azobenzene unit (Cu·1-γ-CyD) and examined how they recognized phosphoric acid derivatives in water. The results revealed that Cu·1-γ-CyD recognized ATP with high selectivity over other phosphoric acid derivatives. The significant blue shift in the UV-vis spectra and ¹H NMR analysis suggested that the selective ATP recognition was based on the multipoint interactions between the adenine moiety of ATP and both the CyD cavity and the azobenzene unit in addition to the recognition of phosphoric moieties by the Cu-dpa complex site. Our unique receptor made it capable of distinguishing ATP from AMP and ADP, revealing the discrimination of even a length of one phosphoric group. This study demonstrates that, compared to conventional recognition systems of CyDs, this multipoint recognition system confers a higher degree of selectivity for certain organic molecules, such as ATP, over their similar derivatives.

Solvent effect on the fluorescence response of hydroxycoumarin bearing a dipicolylamine binding site to metal ions

The fluorescence behavior of a probe dpa-HC, which has a coumarin derivative that acts as a fluorophore and a dipicolylamine (DPA) unit that functions as a metal ion-recognition site, was investigated with various metal ions in aqueous and several non-aqueous solvents. In aqueous solution, the fluorescence of dpa-HC was enhanced by Zn(2+) and Cd(2+), but was quenched by other metal ions. On the other hand, in an acetonitrile solution, only Mg(2+) enhanced the fluorescence, and the addition of a small amount of water quenched this fluorescence. This dramatic selectivity change is explained by stabilization of a metal-dpa-HC complex due to acetonitrile coordination and ON-OFF switching of the intramolecular photoinduced electron transfer (PET) from the nitrogen lone pair of DPA to the coumarin derivative.

Effects of cyclodextrins on intramolecular photoinduced electron transfer in a boronic acid fluorophore

An inclusion complex consisting of a boronic acid fluorophore (C1-APB) and β-cyclodextrin (β-CyD) acts as a supramolecular sugar sensor whose response mechanism is based on photoinduced electron transfer (PET) from the excited pyrene to the boronic acid. We have investigated the PET process in C1-APB/CyD complexes by using time-resolved photoluminescence (TRPL) measurements at room temperature, and have succeeded in estimating the electron-transfer time to be about 1 ns. We have also studied the effects of CyDs on the PET process by comparing two kinds of CyDs (α-CyD, β-CyD) under different water-dimethyisulfoxide (DMSO) concentration conditions. We found that the CyDs interacting with the boronic acid moiety completely inhibits PET quenching and increases the monomer fluorescence intensity.

The design of phenylboronic acid azoprobe–polyamidoamine dendrimer complexes as supramolecular sensors for saccharide recognition in water

Phenylboronic acid azoprobe–PAMAM dendrimer complex responded to saccharides and exhibited selective aggregation particularly with glucose at neutral pH.

Simple and rapid separation of soyasaponin Bb from a soy extract

A simple method to separate soyasaponin Bb from a soy extract is presented. This method is based on the difference in the solubility of soyasaponin Bb and Ba and other components into 3:7 and 1:1 (v/v) acetone-water mixed solvents. The crude soyasaponin consisting of soyasaponins Aa, Ab, Ba, and Bb at the 10 wt% level and other components was examined as the soy extract. A 10 mg quantity of the crude soyasaponin was mixed with 1 mL of the 3:7 acetone-water containing 0.1 mol/L HCl, and the supernatant was removed to obtain a precipitate, which was found to contain mainly soyasaponins Bb and Ba. The precipitate was mixed with 0.4 mL of the 1:1 acetone-water containing 0.1 mol/L HCl; the supernatant was transferred, and was mixed with 0.6 mL of water to obtain a precipitate, which was found to contain mainly soyasaponin Bb. The yield was ca. 30%, which may be much higher than that by the conventional preparative chromatographic approach. The separation method is rapid and easy to carry out, and is useful for the preparation of a soyasaponin Bb sample.

Hyperchromisity and molecular recognition of a novel modified β-cyclodextrin tethering with phenylaminoazobenzene

A modified β-cyclodextrin (1) tethered with a phenylaminoazobenzen moiety has been synthesized for the purpose of developing a new guest-responsive color-change chemosensor. When the solution became acidic, 1 changed color from yellow to purple due to a structural change of the dye moiety from the azo form to the azonium one by protonation on the azo group. However, the pH titration curve of 1 was affected by the presence of the guest, as shown by the fact that the curve in the acidic region shifted to the neutral side by the presence of 1-adamantanol. This suggests that 1 has a potential to show a guest-induced absorption variation under the acidic condition. Upon guest addition at pH 0.61 at the concentration of 1 with 1 × 10(-5) M, 1 showed a colorless-to-color change. Such hyperchromisity in the absorption spectrum of 1 is associated with a guest-induced conformational change of the dye moiety from inside to outside of the CD cavity, and is used for molecular sensing. Among various guests, 1 was found to be highly sensitive to a steroidal guest having a C12 hydroxyl group in the framework, such as ursodeoxycholic acid and lithocholic acid in an acidic aqueous solution.

Recent advances in fluorescent arylboronic acids for glucose sensing

Continuous glucose monitoring (CGM) is crucial in order to avoid complications caused by change in blood glucose for patients suffering from diabetes mellitus. The long-term consequences of high blood glucose levels include damage to the heart, eyes, kidneys, nerves and other organs, among others, caused by malign glycation of vital protein structures. Fluorescent monitors based on arylboronic acids are promising candidates for optical CGM, since arylboronic acids are capable of forming arylboronate esters with 1,2-cis-diols or 1,3-diols fast and reversibly, even in aqueous solution. These properties enable arylboronic acid dyes to provide immediate information of glucose concentrations. Thus, the replacement of the commonly applied semi-invasive and non-invasive techniques relying on glucose binding proteins, such as concanavalin A, or enzymes, such as glucose oxidase, glucose dehydrogenase and hexokinases/glucokinases, might be possible. The recent progress in the development of fluorescent arylboronic acid dyes will be emphasized in this review.