A potential in situ gel formulation loaded with novel fabricated poly(lactide-co-glycolide) nanoparticles for enhancing and sustaining the ophthalmic delivery of ketoconazole

Novel anti-dandruff shampoo incorporated with ketoconazole-coated zinc oxide nanoparticles using green tea extract

BACKGROUND

Dandruff caused by Malassezia furfur is a prevailing fungal infection. Although ketoconazole (KTZ) is widely intended for anti-dandruff treatment, poor solubility, and epidermal permeability limits its use and the marketed KTZ shampoo adversely effects scalp and hair.

OBJECTIVE

To prepare a novel shampoo loaded with KTZ-coated zinc oxide nanoparticles using green tea extract and evaluate its antifungal activity.

METHODS

The KTZ-coated zinc oxide nanoparticles was prepared by green synthesis and was characterized by UV, FTIR, XRD, and the drug entrapment efficiency was investigated. The antifungal activity of the nanoparticles with respect to standard drug, KTZ was tested against Malassezia furfur. Further, a novel antidandruff shampoo was developed by incorporating the prepared nanoparticles into the shampoo base.

RESULTS

The formation of KTZ-coated ZnO nanoparticles was confirmed by UV and FTIR analysis. XRD analysis confirmed the amorphous phase of KTZ in nanoparticles. The drug entrapment efficiency was found to be 91.84%. The prepared nanoparticles showed enhanced activity against Malassezia furfur compared to drug of choice, KTZ (1%). The evaluation of shampoo showed an ideal result.

CONCLUSION

KTZ-coated ZnO nanoparticles loaded novel shampoo in comparison to marketed anti-dandruff shampoo could be an effective alternate for the treatment of dandruff.

Ketoconazole-loading strategy to improve antifungal activity and overcome cytotoxicity on human renal proximal tubular epithelial cells

Ketoconazole (KTZ), an antifungal agent used to treat localized or systemic fungal infections by inhibiting ergosterol synthesis, exhibits restricted efficacy within eukaryotic cells owing to its elevated toxicity and limited solubility in water. This study aims to improve the biological activity and overcome cytotoxic effects in the renal system of the hydrophobic KTZ by incorporating it into poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) utilizing biomaterial nano-engineering techniques. KTZ-loaded PLGA NPs (KTZ-NPs) were prepared by single emulsion solvent evaporation method and characterized by using dynamic light scattering (DLS), electrophoretic light scattering (ELS), Fourier transform-infrared (FT-IR) spectroscopy and scanning light microscopy (SEM). Particle size and zeta potential of KTZ-NPs were determined as 182.0 ± 3.27 nm and -27.4 ± 0.56 mV, respectively. Antifungal activity was analyzed with the time-kill and top agar dilution methods onCandida albicans(C. albicans) andAspergillus flavus(A. flavus). Both KTZ and KTZ-NPs caused a significant decrease inA. flavuscell growth; however, the same effect was only observed in time-killing analysis onC. albicans, indicating a methodological difference in the antifungal analysis. According to the top agar method, the MIC value of KTZ-NPs againstA. flavuswas 9.1μg ml-1, while the minimum inhibition concentration (MIC) value of KTZ was 18.2μg ml-1. The twofold increased antifungal activity indicates that nanoparticular drug delivery systems enhance the water solubility of hydrophobic drugs. In addition, KTZ-NPs were not cytotoxic on human renal proximal tubular epithelial cells (HRPTEpCs) at fungistatic concentration, thus reducing fungal colonization without cytotoxic on renal excretion system cells.

Combination of Cellulose Derivatives and Chitosan-Based Polymers to Investigate the Effect of Permeation Enhancers Added to In Situ Nasal Gels for the Controlled Release of Loratadine and Chlorpheniramine

The purpose of the study is to develop and assess mucoadhesive in situ nasal gel formulations of loratadine and chlorpheniramine maleate to advance the bioavailability of the drug as compared to its conventional dosage forms. The influence of various permeation enhancers, such as EDTA (0.2% w/v), sodium taurocholate (0.5% w/v), oleic acid (5% w/v), and Pluronic F 127 (10% w/v), on the nasal absorption of loratadine and chlorpheniramine from in situ nasal gels containing different polymeric combinations, such as hydroxypropyl methylcellulose, Carbopol 934, sodium carboxymethylcellulose, and chitosan, is studied. Among these permeation enhancers, sodium taurocholate, Pluronic F127 and oleic acid produced a noticeable increase in the loratadine in situ nasal gel flux compared with in situ nasal gels without permeation enhancer. However, EDTA increased the flux slightly, and in most cases, the increase was insignificant. However, in the case of chlorpheniramine maleate in situ nasal gels, the permeation enhancer oleic acid only showed a noticeable increase in flux. Sodium taurocholate and oleic acid seems to be a better and efficient enhancer, enhancing the flux > 5-fold compared with in situ nasal gels without permeation enhancer in loratadine in situ nasal gels. Pluronic F127 also showed a better permeation, increasing the effect by >2-fold in loratadine in situ nasal gels. In chlorpheniramine maleate in situ nasal gels with EDTA, sodium taurocholate and Pluronic F127 were equally effective, enhancing chlorpheniramine maleate permeation. Oleic acid has a better effect as permeation enhancer in chlorpheniramine maleate in situ nasal gels and showed a maximum permeation enhancement of >2-fold.

Overview of Antimicrobial Biodegradable Polyester-Based Formulations

As the clinical complications induced by microbial infections are known to have life-threatening side effects, conventional anti-infective therapy is necessary, but not sufficient to overcome these issues. Some of their limitations are connected to drug-related inefficiency or resistance and pathogen-related adaptive modifications. Therefore, there is an urgent need for advanced antimicrobials and antimicrobial devices. A challenging, yet successful route has been the development of new biostatic or biocide agents and biomaterials by considering the indisputable advantages of biopolymers. Polymers are attractive materials due to their physical and chemical properties, such as compositional and structural versatility, tunable reactivity, solubility and degradability, and mechanical and chemical tunability, together with their intrinsic biocompatibility and bioactivity, thus enabling the fabrication of effective pharmacologically active antimicrobial formulations. Besides representing protective or potentiating carriers for conventional drugs, biopolymers possess an impressive ability for conjugation or functionalization. These aspects are key for avoiding malicious side effects or providing targeted and triggered drug delivery (specific and selective cellular targeting), and generally to define their pharmacological efficacy. Moreover, biopolymers can be processed in different forms (particles, fibers, films, membranes, or scaffolds), which prove excellent candidates for modern anti-infective applications. This review contains an overview of antimicrobial polyester-based formulations, centered around the effect of the dimensionality over the properties of the material and the effect of the production route or post-processing actions.

Progress of polymer-based strategies in fungal disease management: Designed for different roles

Fungal diseases have posed a great challenge to global health, but have fewer solutions compared to bacterial and viral infections. Development and application of new treatment modalities for fungi are limited by their inherent essential properties as eukaryotes. The microorganism identification and drug sensitivity analyze are limited by their proliferation rates. Moreover, there are currently no vaccines for prevention. Polymer science and related interdisciplinary technologies have revolutionized the field of fungal disease management. To date, numerous advanced polymer-based systems have been developed for management of fungal diseases, including prevention, diagnosis, treatment and monitoring. In this review, we provide an overview of current needs and advances in polymer-based strategies against fungal diseases. We high light various treatment modalities. Delivery systems of antifungal drugs, systems based on polymers' innate antifungal activities, and photodynamic therapies each follow their own mechanisms and unique design clues. We also discuss various prevention strategies including immunization and antifungal medical devices, and further describe point-of-care testing platforms as futuristic diagnostic and monitoring tools. The broad application of polymer-based strategies for both public and personal health management is prospected and integrated systems have become a promising direction. However, there is a gap between experimental studies and clinical translation. In future, well-designed in vivo trials should be conducted to reveal the underlying mechanisms and explore the efficacy as well as biosafety of polymer-based products.

Current Advances in Nano-Based and Polymeric Stimuli-Responsive Drug Delivery Targeting the Ocular Microenvironment: A Review and Envisaged Future Perspectives

Optimal vision remains one of the most essential elements of the sensory system continuously threatened by many ocular pathologies. Various pharmacological agents possess the potential to effectively treat these ophthalmic conditions; however, the use and efficacy of conventional ophthalmic formulations is hindered by ocular anatomical barriers. Recent novel designs of ophthalmic drug delivery systems (DDS) using nanotechnology show promising prospects, and ophthalmic formulations based on nanotechnology are currently being investigated due to their potential to bypass these barriers to ensure successful ocular drug delivery. More recently, stimuli-responsive nano drug carriers have gained more attention based on their great potential to effectively treat and alleviate many ocular diseases. The attraction is based on their biocompatibility and biodegradability, unique secondary conformations, varying functionalities, and, especially, the stimuli-enhanced therapeutic efficacy and reduced side effects. This review introduces the design and fabrication of stimuli-responsive nano drug carriers, including those that are responsive to endogenous stimuli, viz., pH, reduction, reactive oxygen species, adenosine triphosphate, and enzymes or exogenous stimuli such as light, magnetic field or temperature, which are biologically related or applicable in clinical settings. Furthermore, the paper discusses the applications and prospects of these stimuli-responsive nano drug carriers that are capable of overcoming the biological barriers of ocular disease alleviation and/or treatment for in vivo administration. There remains a great need to accelerate the development of stimuli-responsive nano drug carriers for clinical transition and applications in the treatment of ocular diseases and possible extrapolation to other topical applications such as ungual or otic drug delivery.

Multiple Roles of Chitosan in Mucosal Drug Delivery: An Updated Review

Chitosan (CS) is a linear polysaccharide obtained by the deacetylation of chitin, which, after cellulose, is the second biopolymer most abundant in nature, being the primary component of the exoskeleton of crustaceans and insects. Since joining the pharmaceutical field, in the early 1990s, CS attracted great interest, which has constantly increased over the years, due to its several beneficial and favorable features, including large availability, biocompatibility, biodegradability, non-toxicity, simplicity of chemical modifications, mucoadhesion and permeation enhancer power, joined to its capability of forming films, hydrogels and micro- and nanoparticles. Moreover, its cationic character, which renders it unique among biodegradable polymers, is responsible for the ability of CS to strongly interact with different types of molecules and for its intrinsic antimicrobial, anti-inflammatory and hemostatic activities. However, its pH-dependent solubility and susceptibility to ions presence may represent serious drawbacks and require suitable strategies to be overcome. Presently, CS and its derivatives are widely investigated for a great variety of pharmaceutical applications, particularly in drug delivery. Among the alternative routes to overcome the problems related to the classic oral drug administration, the mucosal route is becoming the favorite non-invasive delivery pathway. This review aims to provide an updated overview of the applications of CS and its derivatives in novel formulations intended for different methods of mucosal drug delivery.

K, Pilaquinga F, Kumar B, Debut A. Comparative statistical analysis of the release kinetics models for nanoprecipitated drug delivery systems based on poly(lactic-co-glycolic acid)

Poly(lactic-co-glycolic acid) is one of the most used polymers for drug delivery systems (DDSs). It shows excellent biocompatibility, biodegradability, and allows spatio-temporal control of the release of a drug by altering its chemistry. In spite of this, few formulations have reached the market. To characterize and optimize the drug release process, mathematical models offer a good alternative as they allow interpreting and predicting experimental findings, saving time and money. However, there is no general model that describes all types of drug release of polymeric DDSs. This study aims to perform a statistical comparison of several mathematical models commonly used in order to find which of them best describes the drug release profile from PLGA particles synthesized by nanoprecipitation method. For this purpose, 40 datasets extracted from scientific articles published since 2016 were collected. Each set was fitted by the models: order zero to fifth order polynomials, Korsmeyer-Peppas, Weibull and Hyperbolic Tangent Function. Some data sets had few observations that do not allow to apply statistic test, thus bootstrap resampling technique was performed. Statistic evidence showed that Hyperbolic Tangent Function model is the one that best fit most of the data.

Polymeric versus lipid nanocapsules for miconazole nitrate enhanced topical delivery: in vitro and ex vivo evaluation

Nanocapsules can be equated to other nanovesicular systems in which a drug is entrapped in a void containing liquid core surrounded by a coat. The objective of the present study was to investigate the potential of polymeric and lipid nanocapsules (LNCs) as innovative carrier systems for miconazole nitrate (MN) topical delivery. Polymeric nanocapsules and LNCs were prepared using emulsification/nanoprecipitation technique where the effect of poly(ε-caprolactone (PCL) and lipid matrix concentrations with respect to MN were assessed. The resulted nanocapsules were examined for their average particle size, zeta potential, %EE, and in vitro drug release. Optimum formulation in both polymeric and lipidic nanocapsules was further subjected to anti-fungal activity and ex vivo permeation tests. Based on the previous results, nanoencapsulation strategy into polymeric and LNCs created formulations of MN with slow biphasic release, high %EE, and improved stability, representing a good approach for the delivery of MN. PNCs were best fitted to Higuchi’s diffusion while LNCs followed Baker and Lonsdale model in release kinetics. The encapsulated MN either in PNCs or LNCs showed higher cell viability in WISH amniotic cells in comparison with free MN. PNCs showed less ex vivo permeation. PNCs were accompanied by high stability and more amount drug deposition (32.2 ± 3.52 µg/cm²) than LNCs (12.7 ± 1.52 µg/cm²). The antifungal activity of the PNCs was high 19.07 mm compared to 11.4 mm for LNCs. In conclusion, PNCs may have an advantage over LNCs by offering dual action for both superficial and deep fungal infections.

Nanotechnology-based formulations to amplify intraocular bioavailability

Conventional drug delivery formulations, such as eye drops and ointments, are mainly administered by topical instillation. The topical delivery of ophthalmic drugs is a challenging endeavor despite the eye is easily accessible. Unique and complex barriers, serving as protection against extrinsic harmful factors, hamper therapeutic intraocular drug concentrations. Bioavailability for deeper ocular tissues of the anterior segment of the eye is exceptionally low. As the bioavailability of the active substance is the major hurdle to overcome, dosing is increased, so the side effects do. Both provoke patient poor compliance, confining the desired therapeutic outcome. The incidence and severity of adverse reactions amplify evenly in the case of chronic treatments. Current research focuses on the development of innovative delivery strategies to address low ocular bioavailability and provide safe and convenient dosing schemes. The main objective of this review is to explore and present the latest developments in ocular drug delivery formulations for the treatment of the pathology of the anterior segment of the eye. Nanotechnology-based formulations, that is, organic nanoparticles (liposomes, niosomes/discosomes, dendrimers, nanoemulsions, nanosuspensions, nanoparticles/nanospheres) and inorganic nanoparticles, nanoparticle-laden therapeutic contact lenses, in situ gelling systems, and ocular inserts, are summarized and presented accordingly.

In Situ Liquid Crystal Gel as a Promising Strategy for Improving Ocular Administration of Dexamethasone: Preparation, Characterization, and Evaluation

The purpose of this study was to design an in situ liquid crystal gel (ISLG) as an ophthalmic drug delivery system for dexamethasone (DEX) to enhance its eye retention and ocular bioavailability. The in situ liquid crystal gels (ISLGs) were prepared using a phytantriol/PEG400/water (65:30:5, w/w) ternary system. Polarized light microscope (PLM), small-angle X-ray scattering (SAXS), and rheology analysis confirmed that the internal structure of the preparations was Pn3m cubic phase liquid crystal gels with pseudoplastic fluid properties. Meanwhile, in vitro release behavior of the preparations conforms to the Higuchi equation. Corneal penetration experiments showed that compared with DEX sodium phosphate eye drops, DEX-ISLGs(F2) produced a 5.45-fold increase in the P_app value, indicating a significant enhancement of corneal penetration. In addition, in vivo experiments have confirmed that the ISLGs have better biocompatibility and longer retention time in the cornea. Simultaneously, corneal hydration level, eye irritation experiments, and histological observations proved the safety of the preparations. Pharmacokinetic studies have shown that the ISLG could maintain the DEX concentration in aqueous humor for at least 12 h after administration, which significantly improves the bioavailability of the drug. Collectively, these results indicated that ISLG would be a potential drug carrier for the treatment of diabetic retinopathy (DR).

Nanotechnology for Topical Drug Delivery to the Anterior Segment of the Eye

Topical drug delivery is one of the most challenging aspects of eye therapy. Eye drops are the most prevalent drug form, especially for widely distributed anterior segment eye diseases (cataracts, glaucoma, dry eye syndrome, inflammatory diseases, etc.), because they are convenient and easy to apply by patients. However, conventional drug formulations are usually characterized by short retention time in the tear film, insufficient contact with epithelium, fast elimination, and difficulties in overcoming ocular tissue barriers. Not more than 5% of the total drug dose administered in eye drops reaches the interior ocular tissues. To overcome the ocular drug delivery barriers and improve drug bioavailability, various conventional and novel drug delivery systems have been developed. Among these, nanosize carriers are the most attractive. The review is focused on the different drug carriers, such as synthetic and natural polymers, as well as inorganic carriers, with special attention to nanoparticles and nanomicelles. Studies in vitro and in vivo have demonstrated that new formulations could help to improve the bioavailability of the drugs, provide sustained drug release, enhance and prolong their therapeutic action. Promising results were obtained with drug-loaded nanoparticles included in in situ gel.

Nanoparticles as a Tool for Broadening Antifungal Activities

Fungal infections are diseases that are considered neglected although their infection rates have increased worldwide in the last decades. Thus, since the antifungal arsenal is restricted and many strains have shown resistance, new therapeutic alternatives are necessary. Nanoparticles are considered important alternatives to promote drug delivery. In this sense, the objective of the present study was to evaluate the contributions of newly developed nanoparticles to the treatment of fungal infections. Studies have shown that nanoparticles generally improve the biopharmaceutical and pharmacokinetic characteristics of antifungals, which is reflected in a greater pharmacodynamic potential and lower toxicity, as well as the possibility of prolonged action. It also offers the proposition of new routes of administration. Nanotechnology is known to contribute to a new drug delivery system, not only for the control of infectious diseases but for various other diseases as well. In recent years, several studies have emphasized its application in infectious diseases, presenting better alternatives for the treatment of fungal infections.

Cyclosporine Lipid Nanocapsules as Thermoresponsive Gel for Dry Eye Management: Promising Corneal Mucoadhesion, Biodistribution and Preclinical Efficacy in Rabbits

An ophthalmic cyclosporine (CsA) formulation based on Lipid nanocapsules (LNC) was developed for dry eye management, aiming to provide targeting to ocular tissues with long-term drug levels and maximum tolerability. CsA-LNC were of small particle size (41.9 ± 4.0 nm), narrow size distribution (PdI ≤ 0.1), and high entrapment efficiency (above 98%). Chitosan (C) was added to impart positive charge. CsA-LNC were prepared as in-situ gels using poloxamer 407 (P). Ex vivo mucoadhesive strength was evaluated using bovine cornea, while in vivo corneal biodistribution (using fluorescent DiI), efficacy in dry eye using Schirmer tear test (STT), and ocular irritation using Draize test were studied in rabbits compared to marketed ophthalmic CsA nanoemulsion (CsA-NE) and CsA in castor oil. LNC incorporation in in-situ gels resulted in an increase in mucoadhesion, and stronger fluorescence in corneal layers seen by confocal microscopy, compared to the other tested formulations. Rate of recovery (days required to restore corneal baseline hydration level) assessed over 10 days, showed that CsA-LNC formulations produced complete recovery by day 7 comparable to CsA-NE. No Ocular irritation was observed by visual and histopathological examination. Based on data generated, CsA-LNC-CP in-situ gel proved to be a promising effective nonirritant CsA ophthalmic formulation for dry eye management.

Current applications and prospects of nanoparticles for antifungal drug delivery

Currently, the significance of fungi as human pathogens is not medically concealed in the world. Consequently, suitable recognition and treatment of such infections are of great importance and necessitate the need for comprehensive information in this regard. The introduction of new antifungals and their use today, especially in the last two decades, have revolutionized the treatment of fungal infections. On the other hand, increasing drug resistance in the world has overshadowed such developments. The use of NPs results in the treatment of fungal infections and owing to their specific properties, these particles, unlike the pure antibiotics, can exert a greater inhibitory power although with less concentration compared with conventional drugs. Important reasons that have led to the use of antifungal drugs in delivery systems include reduced drug efficacy, limited penetration through tissue, poor aqueous solubility, decreased bioavailability, and poor drug pharmacokinetics. It is therefore hoped that unfavorable properties of antifungal drugs be mitigated via their incorporation into different types of NPs. This review summarizes the different types of NPs as delivery systems of antifungal as well as their advantages over pure drugs.

Development and Characterization of PLGA Nanoparticle-Laden Hydrogels for Sustained Ocular Delivery of Norfloxacin in the Treatment of Pseudomonas Keratitis: An Experimental Study

Aim

Norfloxacin (NFX) has low ocular bioavailability. The current work aimed to develop NFX-loaded nanoparticle (NP)-laden hydrogels to improve the ocular potential of NFX, minimize the need for frequent instillations and lower undesirable side effects.

Methods

NFX-loaded NPs were developed via the double-emulsion/solvent evaporation technique, according to 2¹.4¹ full factorial design, using two types of polylactic-co-glycolic acid (PLGA) polymer and four (drug: polymer) ratios. NPs were evaluated for particle size (PS), polydispersity index (PDI), zeta potential (ZP), drug entrapment efficiency percentage (EE%), drug percentage released after 30 min (Q_30min) and 12 hours (Q_12h), drug percentage permeated through goat corneas after 30 min (P_30min) and 12 hours (P_12h) and morphology. Two formulae were statistically selected and incorporated into hydroxypropyl methylcellulose (HPMC)-based hydrogels; G1 – G4. The latter systems were evaluated for appearance, clarity, pH, spreadability, rheology, drug percentages released, drug percentages permeated, antimicrobial activity against Pseudomonas aeruginosa, and histopathological changes.

Results

The selected NPs (NP2 and NP6) were spherical in shape and possessed suitable PS (392.02 nm and 190.51 nm) and PDI (0.17 and 0.18), high magnitude of ZP (−30.43 mV and −33.62 mV), high EE% (79.24% and 91.72%), low Q_30min (10.96% and 16.65%) and P_30min (17.39% and 21.05%) and promising Q_12h (58.23% and 71.20%) and P_12h (53.31% and 65.01%), respectively. Clear, spreadable, tolerable, pseudoplastic, and thixotropic HPMC-based hydrogels were developed. They showed more prolonged drug release and drug permeation profiles. NP2- and NP6-laden hydrogels (G3 and G4 systems, respectively) had promising antibacterial activity, and reasonable histopathological safety.

Conclusion

G3 and G4 are potential ocular delivery systems for NFX.

In vitro evaluation of mucoadhesive in situ nanogel of celecoxib for buccal delivery

OBJECTIVE

The research aims for finding the possibility of buccal delivery of celecoxib from an in situ mucoadhesive nanogel, and in vitro evaluation of the gel to evidence the enhanced permeation of drug from buccal mucosa.

MATERIALS AND METHODS

Six formulations of celecoxib loaded NLCs were prepared using stearic acid and oleic acid in different ratio in aqueous solution of poloxamer by emulsion solvent evaporation technique. The physicochemical evaluations of the celecoxib loaded NLC (CeL-NLC) were carried out. The formulation F4 was selected as the best and subjected for FTIR, DSC, PXRD, and surface morphology study. In situ mucoadhesive gel was prepared with F4 in HPC, HPMC and Carbopol 934 gelling systems. The gels were evaluated for their mechanical and rheological properties and in vitro permeation studies through rabbit oral mucosa.

RESULTS

The selected process at high shear homogenization could yield nanoparticles of desired physiochemical properties. The drug and excipients were compatible as disseminated from FTIR study. Transformation of the crystal form to amorphous form of celecoxib was revealed by the solid-state characterization studies. The AFM study unfold the formation of discrete asymmetric nano particles. All mucoadhesive gels found to have good mucoadhesion and rheological property with good in vitro permeation of drug. A comparative study and statistical analysis unveiled that gel containing Carbopol 934 was found to be the best mucoadhesive in situ gel of nano particles of celecoxib with enhanced permeation parameters.

CONCLUSION

Therefore, the above in vitro evaluation of in situ mucoadhesive nano gel proved the potential of the formulation as a promising buccal delivery of celecoxib.

The Antifungal and Ocular Permeation of Ketoconazole from Ophthalmic Formulations Containing Trans-Ethosomes Nanoparticles

Ketoconazole (KET), a synthetic imidazole broad-spectrum antifungal agent, is characterized by its poor aqueous solubility and high molecular weight, which might hamper its corneal permeation. The aim was to develop an ophthalmic formulation loaded with optimized trans-ethosomal vesicles to enhance KET ocular permeation, antifungal activity, rapid drug drainage, and short elimination half-life. Four formulation factors affecting the vesicles' size, zeta potential, entrapment efficiency, and flexibility of the trans-ethosomes formulations were optimized. The optimum formulation was characterized, and their morphological and antifungal activity were studied. Different ophthalmic formulations loaded with the optimized vesicles were prepared and characterized. The ocular irritation and in vivo corneal permeation were investigated. Results revealed that the drug-to-phospholipid-molar ratio, the percentage of edge activator, the percentage of ethanol, and the percentage of stearyl amine significantly affect the characteristics of the vesicles. The optimized vesicles were spherical and showed an average size of 151.34 ± 8.73 nm, a zeta potential value of +34.82 ± 2.64 mV, an entrapment efficiency of 94.97 ± 5.41%, and flexibility of 95.44 ± 4.33%. The antifungal activity of KET was significantly improved following treatment with the optimized vesicles. The developed in situ gel formulations were found to be nonirritating to the cornea. The trans-ethosomes vesicles were able to penetrate deeper into the posterior eye segment without any toxic effects. Accordingly, the in situ developed gel formulation loaded with KET trans-ethosomes vesicles represents a promising ocular delivery system for the treatment of deep fungal eye infections.

Formation of Antihyperlipidemic Nano-Ezetimibe from Volatile Microemulsion Template for Enhanced Dissolution Profile

Nanostructures play an important role in targeting sparingly water-soluble drugs to specific sites. Because of the structural flexibility and stability, the use of template microemulsions (μEs) can produce functional nanopharmaceuticals of different sizes, shapes, and chemical properties. In this article, we report a new volatile oil-in-water (o/w) μE formulation comprising ethyl acetate/ethanol/brij-35/water to obtain the highly water-dispersible nanoparticles of an antihyperlipidemic agent, ezetimibe (EZM-NPs), to enhance its dissolution profile. A pseudoternary phase diagram was delineated in a specified brij-35/ethanol ratio (1:1) to describe the transparent, optically isotropic domain of the as-formulated μE. The water-dilutable μE formulation, comprising an optimum composition of ethyl acetate (18.0%), ethanol (25.0%), brij-35 (25.0%), and water (32.0%), showed a good dissolvability of EZM around 4.8 wt % at pH 5.2. Electron micrographs showed a fine monomodal collection of EZM-loaded μE droplets (∼45 nm) that did not coalesce even after lyophilization, forming small spherical EZM-NPs (∼60 nm). However, the maturity of nanodrug droplets observed through dynamic light scattering suggests the affinity of EZM to the nonpolar microenvironment, which was further supported through peak-to-peak correlation of infrared analysis and fluorescence measurements. Moreover, the release profile of the as-obtained EZM-nanopowder increased significantly >98% in 30 min, which indicates that a reduced drug concentration will be needed for capsules or tablets in the future and can be simply incorporated into the multidosage formulation of EZM.

Chitosan and its Derivatives for Ocular Delivery Formulations: Recent Advances and Developments

Chitosan (CS) is a hemi-synthetic cationic linear polysaccharide produced by the deacetylation of chitin. CS is non-toxic, highly biocompatible, and biodegradable, and it has a low immunogenicity. Additionally, CS has inherent antibacterial properties and a mucoadhesive character and can disrupt epithelial tight junctions, thus acting as a permeability enhancer. As such, CS and its derivatives are well-suited for the challenging field of ocular drug delivery. In the present review article, we will discuss the properties of CS that contribute to its successful application in ocular delivery before reviewing the latest advances in the use of CS for the development of novel ophthalmic delivery systems. Colloidal nanocarriers (nanoparticles, micelles, liposomes) will be presented, followed by CS gels and lenses and ocular inserts. Finally, instances of CS coatings, aiming at conferring mucoadhesiveness to other matrixes, will be presented.

PLA-PCL-PEG-PCL-PLA based micelles for improving the ocular permeability of dexamethasone: development, characterization, and in vitro evaluation

The aim of the present research was to investigate the feasibility of developing polylactide-polycaprolactone-polyethylene glycol-polycaprolactone-polylactide (PLA-PCL-PEG-PCL-PLA) based micelles to improve ocular permeability of dexamethasone (DEX). PLA-PCL-PEG-PCL-PLA copolymers were synthesized by a ring-opening polymerization method. DEX was loaded into the developed copolymers. The DEX-loaded micelles were characterized using transmission electron microscopy (TEM) and dynamic light scattering (DLS) methods. Cytotoxicity of the micelles obtained was investigated on L929 cell line. Cellular uptake was followed by fluorescence microscopy and flow cytometry analyses. The release behavior of DEX from the micelles as well as the drug release kinetics was studied. Corneal permeability was also evaluated using an ex vivo bovine model. The pentablock copolymers were successfully synthesized. The TEM results verified the formation of spherical micelles, the sizes of which was approximately 65 nm. The micelles exhibited suitable compatibility on L929 cells. The release profile showed an initial burst release phase followed by a sustained release phase, the kinetic of which was close to the Weibull's distribution model. The micelles showed higher corneal permeability in comparison to a marketed DEX eye drop. Taken together, the results indicated that the PLA-PCL-PEG-PCL-PLA micelles could be appropriate candidates for the ocular delivery of DEX, and probably other hydrophobic drugs.

Recent advances in topical nano drug-delivery systems for the anterior ocular segment

Over the past decade, there has been a rise in the number of clinical cases of moderate to severe anterior segment ocular diseases. Conventional topical ophthalmic formulations have several limitations - to address which, novel drug-delivery systems are needed. Additionally, formidable physiological barriers limit ocular bioavailability through the topical route of application. During the last decade, various nano-scaled ocular drug-delivery strategies have been reported. Some of these exploratory, topical, noninvasive approaches have shown promise in improving penetration into the anterior segment tissues of the eye. In this article, we review the available literature with respect to the safety, efficiency and effectiveness of these nano systems.

Formulation and clinical investigation of optimized vinpocetine lyoplant-tabs: new strategy in development of buccal solid dosage form

BACKGROUND

This work aimed to develop a new solid dosage formulation of vinpocetine (VPN) in the form of buccal freeze-dried pullulan-based tablets (lyoplant-tabs) loaded with physically modified drug binary system.

METHODS

Different polyvinyl pyrrolidone (PVP) grades were studied to prepare an efficient VPN binary system characterized by enhanced equilibrium saturation solubility, solubilization efficiency, thermodynamic stability, and permeation through oral mucosal cell lines. The concentrations of pullulan and swelling-aid polymer that affect the quality attributes of lyoplant-tabs were optimized. Clinical pharmacokinetics study on human volunteers for the optimized lyoplant-tabs compared to marketed product was accomplished.

RESULTS

A promising drug binary system with polyvinyl pyrrolidone vinyl acetate (PVP-VA64) utilizing the lyophilization technique was developed. Solid-state characterization confirmed transformation of VPN completely into the amorphous form. The concentrations of pullulan and swelling-aid polymer were significantly affecting the characteristics of the tablets. Compared to the commercial VPN tablets, pullulan-based buccal tablets demonstrated enhancement in the studied pharmacokinetic parameters with positive impact on the drug bioavailability.

CONCLUSION

These VPN lyoplant-tabs containing lyophilized PVP-VA64-VPN binary system can be considered as an alternative to currently available marketed tablets; however, further preclinical investigations using large number of volunteers are required.

In vitro and ex vivo studies on diltiazem hydrochloride-loaded microsponges in rectal gels for chronic anal fissures treatment

Diltiazem hydrochloride, topically applied at 2% concentration, is considered effective for the treatment of chronic anal fissures, although it involves several side effects among which anal pruritus and postural hypotension. To test the hypothesis that a sustained delivery system of diltiazem hydrochloride may be helpful for the treatment of chronic anal fissures, in the present study we evaluated the potential of gels containing diltiazem hydrochloride entrapped in microsponges. Such microsponges were based on Eudragit RS 100 and the effect of some formulation variables was assessed by a 2³ full factorial screening design. An optimized formulation of diltiazem hydrochloride microsponges was dispersed in Methylcellulose 2% or Poloxamer 407 20% and the resulting gels (micro-l-diltiazem hydrochloride 2%) were subjected to in vitro drug release, ex vivo permeability and drug deposition after application on porcine rectal mucosa. The results showed a prolonged release up to 24 h from micro-l-diltiazem hydrochloride at 2% in the gels. The permeation tests revealed up to 18% higher drug retention on the mucosal tissue after 24 h by the micro-l-diltiazem hydrochloride 2% gels compared to conventional diltiazem hydrochloride gels at 2%. These results suggest that diltiazem hydrochloride-loaded microsponges dispersed in rectal gels may be useful to overcome some limitations of conventional local chronic anal fissure therapy.

Strategies for Improving Ocular Drug Bioavailability and Corneal Wound Healing with Chitosan-Based Delivery Systems

The main inconvenience of conventional eye drops is the rapid washout of the drugs due to nasolacrimal drainage or ophthalmic barriers. The ocular drug bioavailability can be improved by either prolonging retention time in the cul-de-sac or by increasing the ocular permeability. The focus of this review is to highlight some chitosan-based drug delivery approaches that proved to have good clinical efficacy and high potential for use in ophthalmology. They are exemplified by recent studies exploring in-depth the techniques and mechanisms in order to improve ocular bioavailability of the active substances. Used alone or in combination with other compounds with synergistic action, chitosan enables ocular retention time and corneal permeability. Associated with other stimuli-responsive polymers, it enhances the mechanical strength of the gels. Chitosan and its derivatives increase drug permeability through the cornea by temporarily opening tight junctions between epithelial cells. Different types of chitosan-based colloidal systems have the potential to overcome the ocular barriers without disturbing the vision process. Chitosan also plays a key role in improving corneal wound healing by stimulating the migration of keratinocytes when it is used alone or in combination with other compounds with synergistic action.

A potential nanoparticle-loaded in situ gel for enhanced and sustained ophthalmic delivery of dexamethasone

Increasing the permeability of drugs across the cornea is key to improving drug absorption by the eye. This study presents a newly developed in situ gel loaded with nanoparticles, which could achieve controlled drug release and high ocular drug bioavailability by avoiding rapid precorneal clearance. The physicochemical parameters of the formulation were investigated and showed uniform size, physical stability, and favorable rheological and gelling properties. Ex vivo permeation studies revealed significantly higher drug release from the in situ gel loaded with nanoparticles compared to the conventional poloxamer in situ gel and the drug solution. When compared with a marketed formulation, the in situ gel loaded with nanoparticles provided slower controlled release and higher ocular bioavailability of dexamethasone. In conclusion, the developed nanoparticle-loaded in situ gel can successfully increase drug ocular bioavailability by enhancing contact time with the ocular surface and permeation through the cornea.

Chitosan-Based In Situ Gels for Ocular Delivery of Therapeutics: A State-of-the-Art Review

Ocular in situ gels are a promising alternative to overcome drawbacks of conventional eye drops because they associate the advantages of solutions such as accuracy and reproducibility of dosing, or ease of administration with prolonged contact time of ointments. Chitosan is a natural polymer suitable for use in ophthalmic formulations due to its biocompatibility, biodegradability, mucoadhesive character, antibacterial and antifungal properties, permeation enhancement and corneal wound healing effects. The combination of chitosan, pH-sensitive polymer, with other stimuli-responsive polymers leads to increased mechanical strength of formulations and an improved therapeutic effect due to prolonged ocular contact time. This review describes in situ gelling systems resulting from the association of chitosan with various stimuli-responsive polymers with emphasis on the mechanism of gel formation and application in ophthalmology. It also comprises the main techniques for evaluation of chitosan in situ gels, along with requirements of safety and ocular tolerability.

Topical nanodelivery system of lutein for the prevention of selenite-induced cataract

Cataracts are responsible for half of the world blindness, surgery being the only viable treatment. Lutein, a naturally occurring carotenoid in the eye, has the potential to reduce cataract progression by protecting the eye from photo-oxidative stress. To restore the eye's natural line of defense against photo-oxidative stress, a formulation was developed using zein and poly(lactic-co-glycolic acid) nanoparticles (NPs) embedded in an optimized bioadhesive thermosensitive gel for the delivery of lutein via topical application. Cataracts were induced in Crl:WI rats via selenite injection at 13 days post-partum, followed by 7 days of treatment with free lutein or lutein-loaded NPs administered orally or topically. Cataract severity was significantly reduced in rats treated with topical applications of lutein-loaded NPs compared to the positive control, while no significant differences were observed in rats treated with other lutein formulations including oral and topically applied free lutein.

Research progress of in-situ gelling ophthalmic drug delivery system

Blindness and vision impairment are the most devastating global health problems resulting in a substantial economic and social burden. Delivery of drug to particular parts of the anterior or posterior segment has been a major challenge due to various protective barriers and elimination mechanisms associated with the unique anatomical and physiological nature of the ocular system. Drug administration to the eye by conventional delivery systems results in poor ocular bioavailability (<5%). The designing of a novel approach for a safe, simple, and effective ocular drug delivery is a major concern and requires innovative strategies to combat the problem. Over the past decades, several novel approaches involving different strategies have been developed to improve the ocular delivery system. Among these, the ophthalmic in-situ gel has attained a great attention over the past few years. This review discussed and summarized the recent and the promising research progress of in-situ gelling in ocular drug delivery system.