Biomimetic nanoparticles: preparation, characterization and biomedical applications

Formation mechanism, prevention of malignant ascites effusion and reduction of intestinal mucosal irritation of natural microemulsion from Euphorbia lathyris Pulveratum

Malignant ascites effusion (MAE) is a common complication of advanced malignant tumors with limited treatments. Euphorbia lathyris (EL) has a long history of application in patients with edema and ascites. Herein, we reported for the first time a mode in which EL and EL Pulveratum (PEL) spontaneously formed natural microemulsions (ELM and PELM) without the addition of any carriers and excipients, and found that the protein and phospholipid contained in them encapsulated fatty oil and diterpenoid esters through non-covalent interactions. The denaturation and degradation of protein in PELM resulted in stronger binding of diterpenoid esters to the hydrophobic region of protein, which facilitated the sustained and slow release of diterpenoid esters and improved their bioavailability in vivo, thereby retaining the efficacy of preventing MAE while alleviating the irritation of intestinal mucosa. The mechanism by which PELM retained efficacy might be related to increased feces moisture and urine volume, and decreased expression of AVPR2, cAMP, PKA and AQP3 in MAE mice. And its mechanism of reducing intestinal mucosal irritation was related to decreased cell apoptosis, amelioration of oxidative stress, elevation of mitochondrial membrane potential, and up-regulation of Occludin and Claudin-1 expression in IEC-6 cells. This nano-adjuvant-free natural microemulsions may be a promising therapeutic strategy in the field of phytochemistry for promoting the application of natural and efficient nano-aggregates spontaneously formed by medicinal plants in MAE, and provide a new perspective for advancing the development of the fusion of Chinese herbal medicine and nanomedicine and its clinical translation.

De novo design of a nanoregulator for the dynamic restoration of ovarian tissue in cryopreservation and transplantation

The cryopreservation and transplantation of ovarian tissue underscore its paramount importance in safeguarding reproductive capacity and ameliorating reproductive disorders. However, challenges persist in ovarian tissue cryopreservation and transplantation (OTC-T), including the risk of tissue damage and dysfunction. Consequently, there has been a compelling exploration into the realm of nanoregulators to refine and enhance these procedures. This review embarks on a meticulous examination of the intricate anatomical structure of the ovary and its microenvironment, thereby establishing a robust groundwork for the development of nanomodulators. It systematically categorizes nanoregulators and delves deeply into their functions and mechanisms, meticulously tailored for optimizing ovarian tissue cryopreservation and transplantation. Furthermore, the review imparts valuable insights into the practical applications and obstacles encountered in clinical settings associated with OTC-T. Moreover, the review advocates for the utilization of microbially derived nanomodulators as a potent therapeutic intervention in ovarian tissue cryopreservation. The progression of these approaches holds the promise of seamlessly integrating nanoregulators into OTC-T practices, thereby heralding a new era of expansive applications and auspicious prospects in this pivotal domain.

Lipid nanoparticles for siRNA delivery in cancer treatment

RNA-based therapies, and siRNAs in particular, have attractive therapeutic potential for cancer treatment due to their ability to silence genes that are imperative for tumor progression. To be effective and solve issues related to their poor half-life and poor pharmacokinetic properties, siRNAs require adequate drug delivery systems that protect them from degradation and allow intracellular delivery. Among the various delivery vehicles available, lipid nanoparticles have emerged as the leading choice. These nanoparticles consist of cholesterol, phospholipids, PEG-lipids and most importantly ionizable cationic lipids. These ionizable lipids enable the binding of negatively charged siRNA, resulting in the formation of stable and neutral lipid nanoparticles with exceptionally high encapsulation efficiency. Lipid nanoparticles have demonstrated their effectiveness and versatility in delivering not only siRNAs but also multiple RNA molecules, contributing to their remarkable success. Furthermore, the advancement of efficient manufacturing techniques such as microfluidics, enables the rapid mixing of two miscible solvents without the need for shear forces. This facilitates the reproducible production of lipid nanoparticles and holds enormous potential for scalability. This is shown by the increasing number of preclinical and clinical trials evaluating the potential use of siRNA-LNPs for the treatment of solid and hematological tumors as well as in cancer immunotherapy. In this review, we provide an overview of the progress made on siRNA-LNP development for cancer treatment and outline the current preclinical and clinical landscape in this area. Finally, the translational challenges required to bring siRNA-LNPs further into the clinic are also discussed.

Virosome: An engineered virus for vaccine delivery

The purpose of immunization is the effective cellular and humoral immune response against antigens. Several studies on novel vaccine delivery approaches such as micro-particles, liposomes & nanoparticles, etc. against infectious diseases have been investigated so far. In contrast to the conventional approaches in vaccine development, a virosomes-based vaccine represents the next generation in the field of immunization because of its balance between efficacy and tolerability by virtue of its mechanism of immune instigation. The versatility of virosomes as a vaccine adjuvant, and delivery vehicle of molecules of different nature, such as peptides, nucleic acids, and proteins, as well as provide an insight into the prospect of drug targeting using virosomes. This article focuses on the basics of virosomes, structure, composition formulation and development, advantages, interplay with the immune system, current clinical status, different patents highlighting the applications of virosomes and their status, recent advances, and research associated with virosomes, the efficacy, safety, and tolerability of virosomes based vaccines and the future prospective.

Comparative Colloidal Stability of Commercial Amphotericin B Nanoformulations Using Dynamic and Static Multiple Light Scattering Techniques

Background

Amphotericin B (AmB) nanoformulations have been widely used for the treatment of invasive fungal infections in clinical practice, all of which are lyophilized solid dosage forms that improve storage stability. The colloidal stability of reconstituted lyophilized nanoparticles in an injection medium is a critical quality attribute that directly affects their safety and efficacy during clinical use.

Methods

In the present study, the colloidal stability of commercial AmB nanoformulations, including AmB cholesteryl sulfate complex (AmB-CSC) and AmB liposome (AmB-Lipo), was evaluated using the dynamic (DLS) and static multiple light scattering (SMLS) techniques.

Results

Compared to the DLS technique, the SMLS technique allows for a more objective and accurate evaluation of the colloidal stability of AmB nanoformulations. The results obtained using the SMLS technique demonstrated that AmB-CSC and AmB-Lipo exhibited excellent colloidal stability in both sterile water and 5% dextrose injection. The disk-like structure of the AmB-CSC nanoparticles more readily adsorbed serum proteins to form protein corona compared to the spherical structure of AmB-Lipo after incubation with serum. Additionally, AmB-CSC and AmB-Lipo can significantly reduce the in vitro cytotoxicity and in vivo nephrotoxicity of AmB, which may be attributed to the good colloidal stability and the improved pharmacokinetic profiles of AmB nanoformulations.

Conclusion

To the best of our knowledge, this study is the first to compare the colloidal stability of commercial AmB nanoformulations. These findings will provide useful information not only to inform the clinical use of available AmB nanoformulations but also for improving the design and conduct of translational research on novel AmB nanomedicines.

Nanovaccines: Merits, and diverse roles in boosting antitumor immune responses

An attractive type of cancer immunotherapy is cancer therapeutic vaccines that induce antitumor immunity effectively. Although supportive results in the recent vaccine studies, there are still numerous drawbacks, such as poor stability, weak immunogenicity and strong toxicity, to be tackled for promoting the potency and durability of antitumor efficacy. NPs (Nanoparticles)-based vaccines offer unique opportunities to breakthrough the current bottleneck. As a rule, nanovaccines are new the generations of vaccines that use NPs as carriers and/or adjuvants. Several advantages of nanovaccines are constantly explored, including optimal nanometer size, high stability, plenty of antigen loading, enhanced immunogenicity, tunable antigen presentation, more retention in lymph nodes and promote patient compliance by a lower frequency of dosing. Here, we summarized the merits and highlight the diverse role nanovaccines play in improving antitumor responses.

Recent Advances in Endocannabinoid System Targeting for Improved Specificity: Strategic Approaches to Targeted Drug Delivery

Opportunities for developing innovative and intelligent drug delivery technologies by targeting the endocannabinoid system are becoming more apparent. This review provides an overview of strategies to develop targeted drug delivery using the endocannabinoid system (ECS). Recent advances in endocannabinoid system targeting showcase enhanced pharmaceutical therapy specificity while minimizing undesirable side effects and overcoming formulation challenges associated with cannabinoids. This review identifies advances in targeted drug delivery technologies that may permit access to the full pharmacotherapeutic potential of the ECS. The design of optimized nanocarriers that target specific tissues can be improved by understanding the nature of the signaling pathways, distribution in the mammalian body, receptor structure, and enzymatic degradation of the ECS. A closer look at ligand-receptor complexes, endocannabinoid tone, tissue distribution, and G-protein activity leads to a better understanding of the potential of the ECS toolkit for therapeutics. The signal transduction pathways examine the modulation of downstream effector proteins, desensitization, signaling cascades, and biased signaling. An in-depth and overall view of the targeted system is achieved through homology modeling where mutagenesis and ligand binding examine the binding site and allow sequence analysis and the formation of libraries for molecular docking and molecular dynamic simulations. Internalization routes exploring receptor-mediated endocytosis and lipid rafts are also considered for explicit signaling. Furthermore, the review highlights nanotechnology and surface modification aspects as a possible future approach for specific targeting.

Impact of poly(ethylene glycol) functionalized lipids on ordering and fluidity of colloid supported lipid bilayers

Colloid supported lipid bilayers (CSLBs) are highly appealing building blocks for functional colloids. In this contribution, we critically evaluate the impact on lipid ordering and CSLB fluidity of inserted additives. We focus on poly(ethylene glycol) (PEG) bearing lipids, which are commonly introduced to promote colloidal stability. We investigate whether their effect on the CSLB is related to the incorporated amount and chemical nature of the lipid anchor. To this end, CSLBs were prepared from lipids with a low or high melting temperature (T_m), DOPC, and DPPC, respectively. Samples were supplemented with either 0, 5 or 10 mol% of either a low or high T_m PEGylated lipid, DOPE-PEG₂₀₀₀ or DSPE-PEG₂₀₀₀, respectively. Lipid ordering was probed via differential scanning calorimetry and fluidity by fluorescence recovery after photobleaching. We find that up to 5 mol% of either PEGylated lipids could be incorporated into both membranes without any pronounced effects. However, the fluorescence recovery of the liquid-like DOPC membrane was markedly decelerated upon incorporating 10 mol% of either PEGylated lipids, whilst insertion of the anchoring lipids (DOPE and DSPE without PEG₂₀₀₀) had no detectable impact. Therefore, we conclude that the amount of incorporated PEG stabilizer, not the chemical nature of the lipid anchor, should be tuned carefully to achieve sufficient colloidal stability without compromising the membrane dynamics. These findings offer guidance for the experimental design of studies using CSLBs, such as those focusing on the consequences of intra- and inter-particle inhomogeneities for multivalent binding and the impact of additive mobility on superselectivity.

Novel Proteoliposome-Based Vaccine against E. coli: A Potential New Tool for the Control of Bovine Mastitis

Simple Summary

Mastitis is a highly prevalent disease in dairy cattle, affecting animal welfare and generating economic losses for the dairy industry. Control measures for coliform mastitis are limited, due to the constant exposure of the teat to bacteria and the emergence of antimicrobial-resistant bacteria, making vaccination an important strategy for control of mastitis. However, currently available vaccines show limited efficacy, which could be attributed to inactivation processes that alter the antigenic preservation of the vaccines. The aim of this study was to assess the efficacy of a novel vaccine against mastitis using proteoliposomes obtained from E. coli in a murine model of coliform mastitis. We demonstrated that the proteoliposome vaccine was safe, immunogenic and effective against an experimental model of E. coli mastitis, decreasing bacterial count and tissue damage. This proteoliposome vaccine is a potential new tool for prevention of mastitis.

Abstract

Escherichia coli is an important causative agent of clinical mastitis in cattle. Current available vaccines have shown limited protection. We evaluated the efficacy of a novel vaccine based on bacterial proteoliposomes derived from an E. coli field strain. Female BALB/c mice were immunized subcutaneously with two doses of the vaccine, 3 weeks apart. Between days 5 and 8 after the first inoculation, the females were mated. At 5–8 days postpartum, the mice were intramammary challenged with the same E. coli strain. Two days after bacterial infection, mice were euthanized, and the mammary glands were examined and removed to evaluate the efficacy and safety of the vaccine as well as the immune response generated by the new formulation. The vaccinated mice showed mild clinical symptoms and a lower mammary bacterial load as compared to non-vaccinated animals. The vaccination induced an increase in levels of IgG, IgG1 and IgG2a against E. coli in blood and mammary glands that showed less inflammatory infiltration and tissue damage, as compared to the control group. In summary, the vaccine based on bacterial proteoliposomes is safe, immunogenic, and effective against E. coli, constituting a new potential tool for mastitis control.

Recent advances of natural and bioengineered extracellular vesicles and their application in vascular regeneration

The progression of cardiovascular diseases such as atherosclerosis and myocardial infarction leads to serious vascular injury, highlighting the urgent need for targeted regenerative therapy. Extracellular vesicles (EVs) composed of a lipid bilayer containing nuclear and cytosolic materials are relevant to the progression of cardiovascular diseases. Moreover, EVs can deliver bioactive cargo in pathological cardiovascular and regulate the biological function of recipient cells, such as inflammation, proliferation, angiogenesis and polarization. However, because the targeting and bioactivity of natural EVs are subject to several limitations, bioengineered EVs have achieved wide advancements in biomedicine. Bioengineered EVs involve three main ways to acquire including (i) modification of the EVs after isolation; (ii) modification of producer cells before EVs’ isolation; (iii) synthesize EVs using natural or modified cell membranes, and encapsulating drugs or bioactive molecules into EVs. In this review, we first summarize the cardiovascular injury-related disease and describe the role of different cells and EVs in vascular regeneration. We also discuss the application of bioengineered EVs from different producer cells to cardiovascular diseases. Finally, we summarize the surface modification on EVs which can specifically target abnormal cells in injured vascular.

Supramolecular Nanostructures for Vaccines

Although this is an era of pandemics and many devastating diseases, this is also a time when bionanotechnology flourishes, illuminating a multidisciplinary field where vaccines are quickly becoming a balsam and a prevention against insidious plagues. In this work, we tried to gain and also give a deeper understanding on nanovaccines and their way of acting to prevent or cure cancer, infectious diseases, and diseases caused by parasites. Major nanoadjuvants and nanovaccines are temptatively exemplified trying to contextualize our own work and its relative importance to the field. The main properties for novel adjuvants seem to be the nanosize, the cationic character, and the biocompatibility, even if it is achieved in a low dose-dependent manner.

An Engineered Specificity of Anti-Neoplastic Agent Loaded Magnetic Nanoparticles for the Treatment of Breast Cancer

Nanoparticles have gained increased attention due to the prospection of drug delivery at target sites, thus limiting the systemic effects of the drugs. Their efficiency was further improved by adding special carriers such as magnetite (Fe3O4). It is one of the extensively used oxides of iron for both pharmaceutical and biomedical applications owing to its ease of preparation and biocompatibility. In this work, Gemcitabine magnetic nanoparticles were prepared using Fe3O4 and chitosan as the primary ingredients. Optimization was accomplished by Box-Behnken Design and factor interactions were evaluated. The desirability function approach was made to enhance the formulation concerning particle size, polydispersity index, and zeta potential. Based on this, optimized magnetic nanoparticles (O-MNP) were formulated with 300 mg of Fe3O4, 297.7 mg of chitosan, and a sonication time of 2.4 h, which can achieve the prerequisites of the target formulation. All other in vitro parameters were found to be following the requirement. In vitro cytotoxic studies for O-MNP were performed using cell cultures of breast cancer (MCF-7), leukemia (THP-1), prostate cancer (PC-3), and lung cancer (A549). O-MNP showed maximum inhibition growth with MCF-7 cell lines rather than other cell lines. The data observed here demonstrates the potential of magnetic nanoparticles of gemcitabine in treating breast cancers.

Berberine-Based Heterogeneous Linear Supramolecules Neutralized the Acute Nephrotoxicity of Aristolochic Acid by the Self-Assembly Strategy

Aristolochic acid (AA) has been reported to cause a series of health problems, including aristolochic acid nephropathy and liver cancer. However, AA-containing herbs are highly safe in combination with berberine (Ber)-containing herbs in traditional medicine, suggesting the possible neutralizing effect of Ber on the toxicity of AA. In the present study, in vivo systematic toxicological experiments performed in zebrafish and mice showed that the supramolecule self-assembly formed by Ber and AA significantly reduced the toxicity of AA and attenuated AA-induced acute kidney injury. Ber and AA can self-assemble into linear heterogenous supramolecules (A-B) via electrostatic attraction and π-π stacking, with the hydrophobic groups outside and the hydrophilic groups inside during the drug combination practice. This self-assembly strategy may block the toxic site of AA and hinder its metabolism. Meanwhile, A-B linear supramolecules did not disrupt the homeostasis of gut microflora as AA did. RNA-sequence analysis, immunostaining, and western blot of the mice kidney also showed that A-B supramolecules almost abolished the acute nephrotoxicity of AA in the activation of the immune system and tumorigenesis-related pathways.

Immunogenicity of antigens from outer membrane vesicles of Neisseria meningitidis associated with bilayer fragment of dioctadecyldimethylammonium in Swiss adult mice

Purpose

In the present study, meningococcal serogroup B outer membrane vesicles (OMVs) were associated with bilayer fragments of a cationic lipid, dioctadecyldimethylammonium (DDA-BF), used as adjuvant, in an antigenic preparation tested in adult female outbred mice. This adjuvant was compared to the traditional adjuvant aluminum hydroxide.

Materials and Methods

The potential in generating humoral response was evaluated by enzyme-linked immunosorbent assay (ELISA). Individual serum was collected and immunoglobulin G (IgG), IgG1, IgG2a, and IgG2b were quantified. Analyses were carried out 15 and 60 days after immunization. Antibodies avidity index were also analyzed by ELISA. Immunoblot and dot-ELISA were carried out to evaluate specific reaction for homologous strains and cross-reactive antigens present in other meningococcal strains isolated in 2011–2012 year, in Brazil. Delayed type hypersensitivity was used as indicative of cellular immunity and compared between two experimental groups, 24 hours after homologous strain challenge.

Results

The OMVs of Neisseria meningitidis, and N. lactamica (related species) were characterized by electrophoretic separation of proteins in 13% polyacrylamide gel. The strains presented antigens in the range of 8 to 130 kDa, showing a heterogeneous protein migration pattern. In the group immunized with OMVs/DDA-BF, we found no significant production of total IgG 15 days after the first immunization. On the other hand, 60 days after first immunization both adjuvants act benefiting total IgG production similarly. The antibodies of the IgG isotype produced by animals immunized after one or two doses after first immunization, showed intermediate and high avidity, independent on the adjuvant used. In both experimental groups the swelling of the footpads was significantly higher than those of the controls, suggesting that only one dose was enough to stimulate the generation of cellular immunity.

Conclusion

The use of this cationic adjuvant for N. meningitidis OMVs preparation revealed good potential for future new antigen preparation for N. meningitidis vaccine.

Antimicrobial Polymer-Based Assemblies: A Review

An antimicrobial supramolecular assembly (ASA) is conspicuous in biomedical applications. Among the alternatives to overcome microbial resistance to antibiotics and drugs, ASAs, including antimicrobial peptides (AMPs) and polymers (APs), provide formulations with optimal antimicrobial activity and acceptable toxicity. AMPs and APs have been delivered by a variety of carriers such as nanoparticles, coatings, multilayers, hydrogels, liposomes, nanodisks, lyotropic lipid phases, nanostructured lipid carriers, etc. They have similar mechanisms of action involving adsorption to the cell wall, penetration across the cell membrane, and microbe lysis. APs, however, offer the advantage of cheap synthetic procedures, chemical stability, and improved adsorption (due to multipoint attachment to microbes), as compared to the expensive synthetic routes, poor yield, and subpar in vivo stability seen in AMPs. We review recent advances in polymer-based antimicrobial assemblies involving AMPs and APs.

The Effects of Solid and Liquid Lipids on the Physicochemical Properties of Nanostructured Lipid Carriers

The aim of this work was to identify from a review of current literature the effects of lipids used in the development of Nanostructured Lipid Carriers (NLCs) on the physicochemical properties of the resulting formulation. The size of the solid lipid, affected by the molecular weight and the complexity of the structure, tends to affect the particle size of the final formulation proportionally; the higher the molecular weight and the more complex the molecular structure, the bigger the particle size of the NLCs. However, there is no straight correlation between the size and the structure of the liquid lipid and the particle size. Moreover, there seems to be a correlation of the solid to liquid lipid ratio which affects the particle size; there has been a trend of increasing particle size when more solid lipid was used. Regarding the entrapment efficiency, it is highly affected by the drug and its interaction with the lipids, as its solubility in the lipids needs to be high so the drug can stay entrapped within the lipid core. There was no direct correlation between the type of lipid used or the ratio and the zeta potential, which affects the stability of the NLCs.

Effect of DODAB Nano-Sized Cationic Bilayer Fragments against Leishmania amazonensis

The dioctadecyldimethylammonium bromide (DODAB) is a double-chained cationic lipid with potent bactericide and fungistatic activities; however, its toxicity on protozoan parasites is still unknown. Here, we show the antileishmanial activity of DODAB nano-sized cationic bilayer fragments on stationary-phase promastigotes and amastigotes of Leishmania amazonensis, the causative agent of cutaneous leishmaniasis. Upon treatment with DODAB, we analyzed the parasite surface zeta-potential, parasite viability, cellular structural modifications, and intracellular proliferation. The DODAB cytotoxic effect was dose-dependent, with a median effective concentration (EC₅₀) of 25 µM for both life-cycle stages, comparable to the reported data for bacteria and fungi. The treatment with DODAB changed the membrane zeta-potential from negative to positive, compromised the parasite's morphology, affected the cell size regulation, caused a loss of intracellular organelles, and probably dysregulated the plasma membrane permeability without membrane disruption. Moreover, the parasites that survived after treatment induced small parasitophorous vacuoles and failed to proliferate inside macrophages. In conclusion, DODAB displayed antileishmanial activity, and it remains to be elucidated how DODAB acts on the protozoan membrane. Understanding this mechanism can provide insights into the development of new parasite-control strategies.

Study of different routes of immunization using outer membrane vesicles of Neisseria meningitidis B and comparison of two adjuvants

Outer membrane vesicles (OMVs) of Neisseria meningitidis contain important antigens to trigger an immune response against meningococci and have been studied as vaccines compounds. The immune response to a vaccine may be affected by its constitution and route of administration. Therefore, Swiss mice were immunized by different routes with OMVs of N. meningitidis B with dimethyl dioctadecyl ammonium bromide in bilayer fragments (DDA-BF) or aluminum hydroxide (AH) as adjuvants. The adjuvants and different routes were compared regarding the immune responses by ELISA, western blot, delayed type hypersensitivity (DTH) and histopathologic analysis. The antigenic preparation generated humoral and cellular immune responses. In quantitative analyzes, in general, AH was superior to DDA-BF. However, analysis such as IgG avidity index, bactericidal activity and immunoblot, revealed no important differences regarding the adjuvant or route of immunization. Regarding the parameters tested, it was not possible to define a superiority between the adjuvants and routes of immunization proposed by this study.

Cationic Nanostructures for Vaccines Design

Subunit vaccines rely on adjuvants carrying one or a few molecular antigens from the pathogen in order to guarantee an improved immune response. However, to be effective, the vaccine formulation usually consists of several components: an antigen carrier, the antigen, a stimulator of cellular immunity such as a Toll-like Receptors (TLRs) ligand, and a stimulator of humoral response such as an inflammasome activator. Most antigens are negatively charged and combine well with oppositely charged adjuvants. This explains the paramount importance of studying a variety of cationic supramolecular assemblies aiming at the optimal activity in vivo associated with adjuvant simplicity, positive charge, nanometric size, and colloidal stability. In this review, we discuss the use of several antigen/adjuvant cationic combinations. The discussion involves antigen assembled to 1) cationic lipids, 2) cationic polymers, 3) cationic lipid/polymer nanostructures, and 4) cationic polymer/biocompatible polymer nanostructures. Some of these cationic assemblies revealed good yet poorly explored perspectives as general adjuvants for vaccine design.

Stabilized oral nanostructured lipid carriers of Adefovir Dipivoxil as a potential liver targeting: Estimation of liver function panel and uptake following intravenous injection of radioiodinated indicator

PURPOSE

Adefovir dipivoxil (AD), a nucleoside reverse transcriptase inhibitor is effective against Hepatitis B virus. Its poor oral bioavailability leads to frequent administration causing severe adverse effects. Thereby the entrapment of AD within lipid nanoparticulate systems is a way of increasing AD oral bioavailability as a result of improving intestinal permeability with efficient liver-targeted delivery together with higher drug stability during storage.

METHODS

AD-loaded nanostructured lipid carriers (AD-NLCs) were prepared via solvent emulsification diffusion technique adopting 2⁴ full factorial design to study the effect of lipid percentage, presence of egg yolk lecithin, surfactant type and percentage on entrapment efficiency (E.E.%), particle size and percent in-vitro drug released after 8 h (Q8hrs).

RESULTS

Formula (F12) showed E.E.% of 90.5 ± 0.2%, vesicle size of 240.2 ± 2.5 nm and Q8hrs of 58.55 ± 9.4% was selected as the optimum formula with desirability value of 0.757 based on highest EE%, lowest P.S. and Q8hrs. Further evaluation of the optimized formula using radioiodinated rose bengal (RIRB) in thioacetamide induced liver damage in Swiss Albino mice revealed a higher liver uptake of 22 ± 0.01% ID/g (percent injected dose/g organ) and liver uptake/Blood (T/B) ratio of 2.22 ± 0.067 post 2 h of I.V injection of RIRB compared to 9 ± 0.01% ID/g and 0.64 ± 0.017 in untreated group, respectively.

CONCLUSION

NLCs could be successfully used as oral drug delivery carriers of the antiviral drug Adefovir Dipivoxil to the liver with higher stability and oral bioavailability. Graphical abstract.

Evaluation of intranasal and subcutaneous route of immunization in neonatal mice using DODAB-BF as adjuvant with outer membrane vesicles of Neisseria meningitis B

BACKGROUND

The Neisseria meningitidis bacterium is a Gram-negative diplococcus that can be classified into different serogroups according to the capsular structure. Six of them (A, B, C, W, X, Y) are responsible for causing Invasive Meningococcal Disease (IMD). The strategies for the development of a vaccine for serogroup B have been directed to the use of outer membrane vesicles (OMVs). The aim of this study was to evaluate the immunogenicity of antigenic determinants from OMVs of N. meningitidis B complexed with two different adjuvants: DODAB-BF and aluminum hydroxide (alum), comparing the evaluation of intranasal and subcutaneous route of immunization.

METHODS

We used prime-boost immunization for the first time in outbred neonatal mice evaluating the cellular and humoral immune response.

RESULTS

Immunoblot, ELISA DOT-ELISA and ELISpot were used universal methods of antibody detection, in order to detect the humoral and cellular immune response in male and female mice. Immunoblot analyzes the specificity of antibodies with the homologous N. meningitidis strain. ELISA served to quantify and compare the titers of antibodies in the serum of mice immunized with DODAB-BF + OMVs and alum + OMVs for IgG, IgG1, and IgG2a. Intranasal immunization produced a mixed response in the T helper cells Th1 and Th2, while subcutaneous immunization exhibited a Th1 profile. The DOT-ELISA identified cross-reactivity with DODAB-BF to different serogroups of N. meningitidis (B, C, W, and Y) that was not observed with alum. ELISpot analyzed IFN-γ- and IL-4 and the results showed the response directly to Th1 and Th2 profile.

CONCLUSION

Our findings indicate that DODAB-BF can be an alternative adjuvant for mucosal cell activation with OMVs of N. meningitidis B and that DODAB-BF was similar to aluminum hydroxide as an adjuvant for subcutaneous immunization.

Self-Assembled Antimicrobial Nanomaterials

Nanotechnology came to stay improving the quality of human life by reducing environmental contamination of earth and water with pathogens. This review discusses how self-assembled antimicrobial nanomaterials can contribute to maintain humans, their water and their environment inside safe boundaries to human life even though some of these nanomaterials display an overt toxicity. At the core of their strategic use, the self-assembled antimicrobial nanomaterials exhibit optimal and biomimetic organization leading to activity at low doses of their toxic components. Antimicrobial bilayer fragments, bilayer-covered or multilayered nanoparticles, functionalized inorganic or organic polymeric materials, coatings and hydrogels disclose their potential for environmental and public health applications in this review.

Biodegradable Ingredient-Based Emulgel Loaded with Ketoprofen Nanoparticles

Biodegradable materials are extensively employed to design nanocarriers that mimic extracellular environment in arthritis. The aim of this study was to formulate and characterize biocompatible, biodegradable ketoprofen-loaded chitosan-chondroitin sulfate (CHS-CS) nanoparticles with natural ingredients for transdermal applications. Polymers used in the design of nanocarriers are biodegradable and produce synergistic anti-inflammatory effect for the treatment of arthritis. For transdermal application, argan oil-based emulgel is utilized to impart viscosity to the formulation. Furthermore, naturally occurring argan oil synergizes anti-inflammatory effect of formulation and promotes skin penetration. CHS and CS form nanoparticles by polyelectrolyte complex formation or complex coacervation at pH 5.0. These particles were loaded into argan oil-based emulgel. Employing this method, nanoparticles were formulated with particle size in the range of 300-500 nm. These nanocarriers entrapped ketoprofen and showed more than 76% encapsulation efficiency and 77% release of the ketoprofen at pH 7.4 within 72 h. Drug releases from CHS-CS nanoparticles by mechanism of simple diffusion. Nanoparticle-loaded argan oil emulgel significantly enhanced skin penetration of ketoprofen as compared to marketed gel (p < 0.05). Nanocarriers prepared successfully delivered drug through transdermal route using natural ingredients. Graphical abstract ᅟ.

Hyperthermia-Triggered Gemcitabine Release from Polymer-Coated Magnetite Nanoparticles

In this work a combined, multifunctional platform, which was devised for the simultaneous application of magnetic hyperthermia and the delivery of the antitumor drug gemcitabine, is described and tested in vitro. The system consists of magnetite particles embedded in a polymer envelope, designed to make them biocompatible, thanks to the presence of poly (ethylene glycol) in the polymer shell. The commercial particles, after thorough cleaning, are provided with carboxyl terminal groups, so that at physiological pH they present negative surface charge. This was proved by electrophoresis, and makes it possible to electrostatically adsorb gemcitabine hydrochloride, which is the active drug of the resulting nanostructure. Both electrophoresis and infrared spectroscopy are used to confirm the adsorption of the drug. The gemcitabine-loaded particles are tested regarding their ability to release it while heating the surroundings by magnetic hyperthermia, in principle their chances as antitumor agents. The release, with first-order kinetics, is found to be faster when carried out in a thermostated bath at 43 °C than at 37 °C, as expected. But, the main result of this investigation is that while the particles retain their hyperthermia response, with reasonably high heating power, they release the drug faster and with zeroth-order kinetics when they are maintained at 43 °C under the action of the alternating magnetic field used for hyperthermia.

Bio-inspired drug delivery systems: an emerging platform for targeted cancer therapy

Bio-inspired platforms directly derived from biological sources are becoming a rapidly emerging field in the development of future anticancer therapeutics. The various platforms discussed are bacteria-based, virus-inspired, cell-derived, nanostructured lipid nanoparticles, and biomacromolecular drug delivery systems.

Cationic Biomimetic Particles of Polystyrene/Cationic Bilayer/Gramicidin for Optimal Bactericidal Activity

Nanostructured particles of polystyrene sulfate (PSS) covered by a cationic lipid bilayer of dioctadecyldimethylammonium bromide (DODAB) incorporated gramicidin D (Gr) yielding optimal and broadened bactericidal activity against both Escherichia coli and Staphylococcus aureus. The adsorption of DODAB/Gr bilayer onto PSS nanoparticles (NPs) increased the zeta-average diameter by 8–10 nm, changed the zeta-potential of the NPs from negative to positive, and yielded a narrow size distributions for the PSS/DODAB/Gr NPs, which displayed broad and maximal microbicidal activity at very small concentrations of the antimicrobials, namely, 0.057 and 0.0057 mM DODAB and Gr, respectively. The results emphasized the advantages of highly-organized, nanostructured, and cationic particles to achieve hybrid combinations of antimicrobials with broad spectrum activity at considerably reduced DODAB and Gr concentrations.

Functionalised nanostructures for transdermal delivery of drug cargos

Nanotechnology has burgeoned over last decade exploring varieties of novel applications in all areas of science and technology. Utilisation of bio-friendly polymers for engineering nanostructures (NS) improves safety and efficacy in drug delivery. Biopolymers not merely employed for fabricating drug carriers but also leveraged for surface functionalisation of other NS to impart bio-mimicking properties. Biopolymer functionalised NS garnered researcher's attention because of their potential to enhance skin permeability of drug cargo. Biopolymers, i.e. cell-penetrating peptides (CPP), chitosan and hyaluronic acid not only enhance skin permeability but also add multiple functions due to their intrinsic biomimetic properties. This multifunctional drug delivery system is a promising tool to achieve skin delivery of large number of therapeutic agents. In this review, functionalisation of NS with biopolymers particularly polysaccharides and polypeptides is discussed in detail. In particular, applications of these functionalised NS for TDDS is elaborated. Moreover, this review provides framework for elaborating importance of functionalisation of NS to enhance skin permeability and depicts advantages of biopolymers to construct more biocompatible carriers for drug cargos.

The role played by modified bioinspired surfaces in interfacial properties of biomaterials

The success of a biomaterial relies on an appropriate interaction between the surface of that biomaterial and the surrounding environment; more specifically, the success of a biomaterial depends on how fluids, proteins, and cells interact with the foreign material. For this reason, the surface properties of biomaterial, such as composition, charge, wettability, and roughness, must be optimized for a desired application to be achieved. In this review we highlight different bioinspired approaches that are used to manipulate and fine-tune the interfacial properties of biomaterials. Inspired by noteworthy natural processes, researchers have developed materials with a functional anatomy that range from hierarchical hybrid structures to self-cleaning interfaces. In this review we focus on (1) the creation of particles and modified surfaces inspired by the structure and composition of biogenic mineralized tissues, (2) the development of biofunctional coatings, (3) materials inspired by biomembranes and proteins, and (4) the design of superwettable materials. Our intention is to point out different bioinspired methodologies that have been used to design materials for biomedical applications and to discuss how interfacial properties modified by manipulation of these materials determine their final biological response. Our objective is to present future research directions and to highlight the potential of bioinspired materials. We hope this review will provide an understanding of the interplay between interfacial properties and biological response so that successful biomaterials can be achieved.

Structure and Catalysis of Fe(III) and Cu(II) Microperoxidase-11 Interacting with the Positively Charged Interfaces of Lipids

Numerous applications have been described for microperoxidases (MPs) such as in photoreceptors, sensing, drugs, and hydrogen evolution. The last application was obtained by replacing Fe(III), the native central metal, by cobalt ion and inspired part of the present study. Here, the Fe(III) of MP-11 was replaced by Cu(II) that is also a stable redox state in aerated medium, and the structure and activity of both MPs were modulated by the interaction with the positively charged interfaces of lipids. Comparative spectroscopic characterization of Fe(III) and Cu(II)MP-11 in the studied media demonstrated the presence of high and low spin species with axial distortion. The association of the Fe(III)MP-11 with CTAB and Cu(II)MP-11 with DODAB affected the colloidal stability of the surfactants that was recovered by heating. This result is consistent with hydrophobic interactions of MPs with DODAB vesicles and CTAB micelles. The hydrophobic interactions decreased the heme accessibility to substrates and the Fe(III) MP-11catalytic efficiency. Cu(II)MP-11 challenged by peroxides exhibited a cyclic Cu(II)/Cu(I) interconversion mechanism that is suggestive of a mimetic Cu/ZnSOD (superoxide dismutase) activity against peroxides. Hydrogen peroxide-activated Cu(II)MP-11 converted Amplex Red^® to dihydroresofurin. This study opens more possibilities for technological applications of MPs.

Induction of Chondrogenic Differentiation of Human Mesenchymal Stem Cells by Biomimetic Gold Nanoparticles with Tunable RGD Density

Nanostructured materials have drawn a broad attention for their applications in biomedical fields. Ligand-modified nanomaterials can well mimic the dynamic extracellular matrix (ECM) microenvironments to regulate cell functions and fates. Herein, ECM mimetic gold nanoparticles (Au NPs) with tunable surface arginine-glycine-aspartate (RGD) density are designed and synthesized to induce the chondrogenic differentiation of human mesenchymal stem cells (hMSCs). The biomimetic Au NPs with an average size of 40 nm shows good biocompatibility without affecting the cell proliferation in the studied concentration range. The RGD motifs on Au NPs surface facilitate cellular uptake of NPs into monolayer hMSCs through integrin-mediated endocytosis. The biomimetic NPs have a promotive effect on cartilaginous matrix production and marker gene expression in cell pellet culture, especially for the biomimetic Au NPs with high surface RGD density. This study provides a novel strategy for fabricating biomimetic NPs to regulate cell differentiation, which holds great potentials in tissue engineering and biomedical applications.

Nanotoxicity in Systemic Circulation and Wound Healing

Nanotoxicity of nanomaterials is an important issue in view of their potential applications in systemic circulation and wound healing dressing. This account specifically deals with several characteristic features of different nanomaterials which induce hemolysis and how to make them hemocompatible. The shape, size, and surface functionalities of naked metallic as well as nonmetallic nanoparticles surfaces are responsible for the hemolysis. An appropriate coating of biocompatible molecules dramatically reduces hemolysis and promotes their ability as safe drug delivery vehicles. The use of coated nanomaterials in wound healing dressing opens several new strategies for rapid wound healing processes. Properly designed nanomaterials should be selected to minimize the nanotoxicity in the wound healing process. Future directions need new synthetic methods for engineered nanomaterials for their best use in nanomedicine and nanobiotechnology.

Biomimetics in drug delivery systems: A critical review

Today, the advanced drug delivery systems have been focused on targeted drug delivery fields. The novel drug delivery is involved with the improvement of the capacity of drug loading in drug carriers, cellular uptake of drug carriers, and the sustained release of drugs within target cells. In this review, six groups of therapeutic drug carriers including biomimetic hydrogels, biomimetic micelles, biomimetic liposomes, biomimetic dendrimers, biomimetic polymeric carriers and biomimetic nanostructures, are studied. The subject takes advantage of the biomimetic methods of productions or the biomimetic techniques for the surface modifications, similar to what accrues in natural cells. Moreover, the effects of these biomimetic approaches for promoting the drug efficiency in targeted drug delivery are visible. The study demonstrates that the fabrication of biomimetic nanocomposite drug carriers could noticeably promote the efficiency of drugs in targeted drug delivery systems.

Humidity Sensing Properties of Paper Substrates and Their Passivation with ZnO Nanoparticles for Sensor Applications

In this paper, we investigated the effect of humidity on paper substrates and propose a simple and low-cost method for their passivation using ZnO nanoparticles. To this end, we built paper-based microdevices based on an interdigitated electrode (IDE) configuration by means of a mask-less laser patterning method on simple commercial printing papers. Initial resistive measurements indicate that a paper substrate with a porous surface can be used as a cost-effective, sensitive and disposable humidity sensor in the 20% to 70% relative humidity (RH) range. Successive spin-coated layers of ZnO nanoparticles then, control the effect of humidity. Using this approach, the sensors become passive to relative humidity changes, paving the way to the development of ZnO-based gas sensors on paper substrates insensitive to humidity.

Non-Enzymatic Glucose Sensor Composed of Carbon-Coated Nano-Zinc Oxide

Nowadays glucose detection is of great importance in the fields of biological, environmental, and clinical analyzes. In this research, we report a zinc oxide (ZnO) nanorod powder surface-coated with carbon material for non-enzymatic glucose sensor applications through a hydrothermal process and chemical vapor deposition method. A series of tests, including crystallinity analysis, microstructure observation, and electrochemical property investigations were carried out. For the cyclic voltammetric (CV) glucose detection, the low detection limit of 1 mM with a linear range from 0.1 mM to 10 mM was attained. The sensitivity was 2.97 μA/cm²mM, which is the most optimized ever reported. With such good analytical performance from a simple process, it is believed that the nanocomposites composed of ZnO nanorod powder surface-coated with carbon material are promising for the development of cost-effective non-enzymatic electrochemical glucose biosensors with high sensitivity.

Nanostructured lipid carriers for oral bioavailability enhancement of raloxifene: Design and in vivo study

The objective of present work was to utilize potential of nanostructured lipid carriers (NLCs) for improvement in oral bioavailability of raloxifene hydrochloride (RLX). RLX loaded NLCs were prepared by solvent diffusion method using glyceryl monostearate and Capmul MCM C8 as solid lipid and liquid lipid, respectively. A full 3(2) factorial design was utilized to study the effect of two independent parameters namely solid lipid to liquid lipid ratio and concentration of stabilizer on the entrapment efficiency of prepared NLCs. The statistical evaluation confirmed pronounced improvement in entrapment efficiency when liquid lipid content in the formulation increased from 5% w/w to 15% w/w. Solid-state characterization studies (DSC and XRD) in optimized formulation NLC-8 revealed transformation of RLX from crystalline to amorphous form. Optimized formulation showed 32.50 ± 5.12 nm average particle size and -12.8 ± 3.2 mV zeta potential that impart good stability of NLCs dispersion. In vitro release study showed burst release for initial 8 h followed by sustained release up to 36 h. TEM study confirmed smooth surface discrete spherical nano sized particles. To draw final conclusion, in vivo pharmacokinetic study was carried out that showed 3.75-fold enhancements in bioavailability with optimized NLCs formulation than plain drug suspension. These results showed potential of NLCs for significant improvement in oral bioavailability of poorly soluble RLX.

Bacterial spores as particulate carriers for gene gun delivery of plasmid DNA

Bacillus subtilis spores represent a suitable platform for the adsorption of proteins, enzymes and viral particles at physiological conditions. In the present work, we demonstrate that purified spores can also adsorb DNA on their surface after treatment with cationic molecules. In addition, we demonstrate that DNA-coated B. subtilis spores can be used as particulate carriers and act as an alternative to gold microparticles for the biolistic (gene gun) administration of plasmid DNA in mice. Gene gun delivery of spores pre-treated with DODAB (dioctadecyldimethylammonium bromide) allowed efficient plasmid DNA absorption and induced protein expression levels similar to those obtained with gold microparticles. More importantly, we demonstrated that a DNA vaccine adsorbed on spores can be loaded into biolistic cartridges and efficiently delivered into mice, which induced specific cellular and antibody responses. Altogether, these data indicate that B. subtilis spores represent a simple and low cost alternative for the in vivo delivery of DNA vaccines by the gene gun technology.

Design attributes of long-circulating polymeric drug delivery vehicles

Following systemic administration polymeric drug delivery vehicles allow for a controlled and targeted release of the encapsulated medication at the desired site of action. For an elevated and organ specific accumulation of their cargo, nanocarriers need to avoid opsonization, activation of the complement system and uptake by macrophages of the mononuclear phagocyte system. In this respect, camouflaged vehicles revealed a delayed elimination from systemic circulation and an improved target organ deposition. For instance, a steric shielding of the carrier surface by poly(ethylene glycol) substantially decreased interactions with the biological environment. However, recent studies disclosed possible deficits of this approach, where most notably, poly(ethylene glycol)-modified drug delivery vehicles caused significant immune responses. At present, identification of novel potential carrier coating strategies facilitating negligible immune reactions is an emerging field of interest in drug delivery research. Moreover, physical carrier properties including geometry and elasticity seem to be very promising design attributes to surpass numerous biological barriers, in order to improve the efficacy of the delivered medication.

Supramolecular cationic assemblies against multidrug-resistant microorganisms: activity and mechanism of action

The growing challenge of antimicrobial resistance to antibiotics requires novel synthetic drugs or new formulations for old drugs. Here, cationic nanostructured particles (NPs) self-assembled from cationic bilayer fragments and polyelectrolytes are tested against four multidrug-resistant (MDR) strains of clinical importance. The non-hemolytic poly(diallyldimethylammonium) chloride (PDDA) polymer as the outer NP layer shows a remarkable activity against these organisms. The mechanism of cell death involves bacterial membrane lysis as determined from the leakage of inner phosphorylated compounds and possibly disassembly of the NP with the appearance of multilayered fibers made of the NP components and the biopolymers withdrawn from the cell wall. The NPs display broad-spectrum activity against MDR microorganisms, including Gram-negative and Gram-positive bacteria and yeast.

Novel formulations for antimicrobial peptides

Peptides in general hold much promise as a major ingredient in novel supramolecular assemblies. They may become essential in vaccine design, antimicrobial chemotherapy, cancer immunotherapy, food preservation, organs transplants, design of novel materials for dentistry, formulations against diabetes and other important strategical applications. This review discusses how novel formulations may improve the therapeutic index of antimicrobial peptides by protecting their activity and improving their bioavailability. The diversity of novel formulations using lipids, liposomes, nanoparticles, polymers, micelles, etc., within the limits of nanotechnology may also provide novel applications going beyond antimicrobial chemotherapy.

Novel gramicidin formulations in cationic lipid as broad-spectrum microbicidal agents

Dioctadecyldimethylammonium bromide (DODAB) is an antimicrobial lipid that can be dispersed as large closed bilayers (LV) or bilayer disks (BF). Gramicidin (Gr) is an antimicrobial peptide assembling as channels in membranes and increasing their permeability towards cations. In mammalian cells, DODAB and Gr have the drawbacks of Gram-positive resistance and high toxicity, respectively. In this study, DODAB bilayers incorporating Gr showed good antimicrobial activity and low toxicity. Techniques employed were spectroscopy, photon correlation spectroscopy for sizing and evaluation of the surface potential at the shear plane, turbidimetric detection of dissipation of osmotic gradients in LV/Gr, determination of bacterial cell lysis, and counting of colony-forming units. There was quantitative incorporation of Gr and development of functional channels in LV. Gr increased the bilayer charge density in LV but did not affect the BF charge density, with localization of Gr at the BF borders. DODAB/Gr formulations substantially reduce Gr toxicity against eukaryotic cells and advantageously broaden the antimicrobial activity spectrum, effectively killing Escherichia coli and Staphylococcus aureus bacteria with occurrence of cell lysis.

Mimicking red blood cell lipid membrane to enhance the hemocompatibility of large-pore mesoporous silica

Mesoporous silica nanoparticles (MSNs) have been repeatedly demonstrated as potential drug-delivery devices. The study of biocompatibility and interaction of these materials with the various cell types is of great interest with regard to the development of viable pharmaceutical products. By mimicking the cholesterol, phosphatidylcholine, and phosphatidylethanolamine composition of the outer leaflet of a human red blood cell (RBC), lipid-bilayer-coated mesoporous silica particles show considerably improved hemocompatibility over phosphatidylcholine-coated and uncoated large-pore MSN (l-MSN). These inorganic/organic composite nanomaterials are shown to be capable of interfacing with RBCs without damaging the cells even at relatively high concentrations, as observed through electron microscopy, UV-vis spectroscopy, and flow cytometry analyses. Interestingly, the absence of cholesterol in the outer bilayer composition is shown to produce toxic effects without resulting in hemolysis. By maintaining the ζ potential of lipid-bilayer-functionalized MSNs similar to that of the hemolytic l-MSNs, we demonstrate that the bilayer composition, and not the surface charge, plays a significant role in determining the hemocompatibility of MSN-based materials.

Membrane mimetic surface functionalization of nanoparticles: methods and applications

Nanoparticles (NPs), due to their size-dependent physical and chemical properties, have shown remarkable potential for a wide range of applications over the past decades. Particularly, the biological compatibilities and functions of NPs have been extensively studied for expanding their potential in areas of biomedical application such as bioimaging, biosensing, and drug delivery. In doing so, surface functionalization of NPs by introducing synthetic ligands and/or natural biomolecules has become a critical component in regard to the overall performance of the NP system for its intended use. Among known examples of surface functionalization, the construction of an artificial cell membrane structure, based on phospholipids, has proven effective in enhancing biocompatibility and has become a viable alternative to more traditional modifications, such as direct polymer conjugation. Furthermore, certain bioactive molecules can be immobilized onto the surface of phospholipid platforms to generate displays more reminiscent of cellular surface components. Thus, NPs with membrane-mimetic displays have found use in a range of bioimaging, biosensing, and drug delivery applications. This review herein describes recent advances in the preparations and characterization of integrated functional NPs covered by artificial cell membrane structures and their use in various biomedical applications.