Patient characteristics as predictors of image quality and diagnostic accuracy of MDCT compared with conventional coronary angiography for detecting coronary artery stenoses: CORE-64 Multicenter International Trial. AJR Am J Roentgenol. 2010;194:93-102. [PMID: 20028910 DOI: 10.2214/ajr.09.2833]

Impact of coronary CT image quality on the accuracy of the FFRCT Planner

OBJECTIVE

To assess the accuracy of a virtual stenting tool based on coronary CT angiography (CCTA) and fractional flow reserve (FFR) derived from CCTA (FFRCT Planner) across different levels of image quality.

MATERIALS AND METHODS

Prospective, multicenter, single-arm study of patients with chronic coronary syndromes and lesions with FFR ≤ 0.80. All patients underwent CCTA performed with recent-generation scanners. CCTA image quality was adjudicated using the four-point Likert scale at a per-vessel level by an independent committee blinded to the FFRCT Planner. Patient- and technical-related factors that could affect the FFRCT Planner accuracy were evaluated. The FFRCT Planner was applied mirroring percutaneous coronary intervention (PCI) to determine the agreement with invasively measured post-PCI FFR.

RESULTS

Overall, 120 patients (123 vessels) were included. Invasive post-PCI FFR was 0.88 ± 0.06 and Planner FFRCT was 0.86 ± 0.06 (mean difference 0.02 FFR units, the lower limit of agreement (LLA) - 0.12, upper limit of agreement (ULA) 0.15). CCTA image quality was assessed as excellent (Likert score 4) in 48.3%, good (Likert score 3) in 45%, and sufficient (Likert score 2) in 6.7% of patients. The FFRCT Planner was accurate across different levels of image quality with a mean difference between FFRCT Planner and invasive post-PCI FFR of 0.02 ± 0.07 in Likert score 4, 0.02 ± 0.07 in Likert score 3 and 0.03 ± 0.08 in Likert score 2, p = 0.695. Nitrate dose ≥ 0.8mg was the only independent factor associated with the accuracy of the FFRCT Planner (95%CI - 0.06 to - 0.001, p = 0.040).

CONCLUSION

The FFRCT Planner was accurate in predicting post-PCI FFR independent of CCTA image quality.

CLINICAL RELEVANCE STATEMENT

Being accurate in predicting post-PCI FFR across a wide spectrum of CT image quality, the FFRCT Planner could potentially enhance and guide the invasive treatment. Adequate vasodilation during CT acquisition is relevant to improve the accuracy of the FFRCT Planner.

KEY POINTS

• The fractional flow reserve derived from coronary CT angiography (FFRCT) Planner is a novel tool able to accurately predict fractional flow reserve after percutaneous coronary intervention. • The accuracy of the FFRCT Planner was confirmed across a wide spectrum of CT image quality. Nitrates dose at CT acquisition was the only independent predictor of its accuracy. • The FFRCT Planner could potentially enhance and guide the invasive treatment.

[Assessment of Coronary Stenosis Using Coronary CT Angiography in Patients with High Calcium Scores: Current Limitations and Future Perspectives]

Coronary CT angiography (CCTA) is recognized for its role as a gatekeeper for invasive coronary angiography in patients suspected of coronary artery disease because it can detect significant coronary stenosis with high accuracy. However, heavy plaque in the coronary artery makes it difficult to visualize the lumen, which can lead to errors in the interpretation of the CCTA results. This is primarily due to the limited spatial resolution of CT scanners, resulting in blooming artifacts caused by calcium. However, coronary stenosis with high calcium scores often requires evaluation using CCTA. Technological methods to overcome these limitations include the introduction of high-resolution CT scanners, the development of reconstruction techniques, and the subtraction technique. Methods to improve reading ability, such as the setting of appropriate window width and height, and evaluation of the position of calcified plaque and residual visibility of the lumen in cross-sectional images, are also recommended.

Effect of Body Mass Index on Effectiveness of CT versus Invasive Coronary Angiography in Stable Chest Pain: The DISCHARGE Trial

Background Recent trials support the role of cardiac CT in the evaluation of symptomatic patients suspected of having coronary artery disease (CAD); however, body mass index (BMI) has been reported to negatively impact CT image quality. Purpose To compare initial use of CT versus invasive coronary angiography (ICA) on clinical outcomes in patients with stable chest pain stratified by BMI category. Materials and Methods This prospective study represents a prespecified BMI subgroup analysis of the multicenter Diagnostic Imaging Strategies for Patients with Stable Chest Pain and Intermediate Risk of Coronary Artery Disease (DISCHARGE) trial conducted between October 2015 and April 2019. Adult patients with stable chest pain and a CAD pretest probability of 10%-60% were randomly assigned to undergo initial CT or ICA. The primary end point was major adverse cardiovascular events (MACE), including cardiovascular death, nonfatal myocardial infarction, or stroke. The secondary end point was an expanded MACE composite, including transient ischemic attack, and major procedure-related complications. Competing risk analyses were performed using the Fine and Gray subdistribution Cox proportional hazard model to assess the impact of the relationship between BMI and initial management with CT or ICA on the study outcomes, whereas noncardiovascular death and unknown causes of death were considered competing risk events. Results Among the 3457 participants included, 831 (24.0%), 1358 (39.3%), and 1268 (36.7%) had a BMI of less than 25, between 25 and 30, and greater than 30 kg/m2, respectively. No interaction was found between CT or ICA and BMI for MACE (P = .29), the expanded MACE composite (P = .38), or major procedure-related complications (P = .49). Across all BMI subgroups, expanded MACE composite events (CT, 10 of 409 [2.4%] to 23 of 697 [3.3%]; ICA, 26 of 661 [3.9%] to 21 of 422 [5.1%]) and major procedure-related complications during initial management (CT, one of 638 [0.2%] to five of 697 [0.7%]; ICA, nine of 630 [1.4%] to 12 of 422 [2.9%]) were less frequent in the CT versus ICA group. Participants with a BMI exceeding 30 kg/m² exhibited a higher nondiagnostic CT rate (7.1%, P = .044) compared to participants with lower BMI. Conclusion There was no evidence of a difference in outcomes between CT and ICA across the three BMI subgroups. Clinical trial registration no. NCT02400229 © RSNA, 2024 Supplemental material is available for this article.

CT annulus sizing prior to transcatheter aortic valve replacement (TAVR): evaluation of free-breathing versus breath-holding acquisition

OBJECTIVES

To assess feasibility and accuracy of aortic annulus measurements using cardiac computed tomography angiography (CTA) performed during free-breathing prior to transcatheter aortic valve replacement (TAVR).

MATERIALS AND METHODS

Sixty consecutive TAVR candidates underwent free-breathing wide-detector cardiac CTA, followed by a percutaneous valve replacement. For each, a theoretical valve size was suggested through CT measurements of the annulus, then compared to the size of the actual implanted transcatheter heart valve (THV). The procedural success and the 30-day outcomes were collected. Image quality of the annulus was also studied according to subjective and objective criteria. Data of a control group of 60 patients previously evaluated on breath-holding were also evaluated.

RESULTS

A total of 120 patients (mean age, 83 years ± 7, 60 men) were evaluated. All CT acquisitions provided sufficient image quality allowing precise annulus measurements. Mean attenuation (p < 0.001) and image noise (p = 0.01) were higher in the free-breathing group, while image quality was comparable (p = 0.36). The agreement rate between CT-suggested valve size and THV implanted size was comparable, estimated at 87% (κ = 0.79, 95%CI 0.566, 0.908) on free-breathing vs. 82% (κ = 0.78, 95%CI 0.634, 0.904) on breath-holding. The procedure was successful for all patients without increase in 30-day mortality or adverse events.

CONCLUSIONS

Free-breathing cardiac CTA allows accurate aortic annulus measurements without compromising image quality or patients' outcome after TAVR. Elderly patients experiencing dyspnea, discomfort, or hearing loss that could prevent proper breath-holding should not be excluded from CT prior to TAVR.

CLINICAL RELEVANCE STATEMENT

To decrease elderly patients' discomfort, MDCT evaluation prior to transcatheter aortic valve replacement (TAVR) may be performed on quiet breathing with no significant impact on the outcome.

KEY POINTS

• Adhering to CT breathing commands can be challenging for patients with dyspnea, hearing impairment, agitation, or pulmonary diseases. • Free-breathing cardiac CT may be an alternative to breath-holding for patients unable to follow the breathing commands. • Wide-detector CT acquisition on free-breathing does not impair annulus measurements and prosthesis sizing in patients scheduled for TAVR.

Cardiac CT blooming artifacts: clinical significance, root causes and potential solutions

This review paper aims to summarize cardiac CT blooming artifacts, how they present clinically and what their root causes and potential solutions are. A literature survey was performed covering any publications with a specific interest in calcium blooming and stent blooming in cardiac CT. The claims from literature are compared and interpreted, aiming at narrowing down the root causes and most promising solutions for blooming artifacts. More than 30 journal publications were identified with specific relevance to blooming artifacts. The main reported causes of blooming artifacts are the partial volume effect, motion artifacts and beam hardening. The proposed solutions are classified as high-resolution CT hardware, high-resolution CT reconstruction, subtraction techniques and post-processing techniques, with a special emphasis on deep learning (DL) techniques. The partial volume effect is the leading cause of blooming artifacts. The partial volume effect can be minimized by increasing the CT spatial resolution through higher-resolution CT hardware or advanced high-resolution CT reconstruction. In addition, DL techniques have shown great promise to correct for blooming artifacts. A combination of these techniques could avoid repeat scans for subtraction techniques.

[Coronary computed tomography and cardiac devices : Diagnostic results or nothing but artifacts?]

Coronary computed tomography (CT) angiography has become a major cornerstone in the diagnostic workup of cardiologic patients, particularly for evaluation of the coronary arteries and preprocedural planning of interventions for structural heart disease. Despite the possible problems that intensive electromagnetic radiation (including X‑rays) might cause when directly impacting on implanted cardiac devices, cardiac CT is a safe diagnostic test and should not be withheld from patients with devices if properly indicated. Sufficient image quality is paramount for the evaluation; hence, special attention should be paid to a low heart rate (< 60 bpm) and sufficient compliance with breathing instructions. Furthermore, pacemaker or implantable cardioverter-defibrillator (ICD) leads may cause metal artifacts, especially around the lead tip. Their dense material causes beam hardening and streak artifacts which may result in reduced image quality and limited diagnostic assessability. The prevalence of such artifacts depends not only on lead material but also on lead positioning relative to the gantry plane. Metal artifacts are more frequent in patients with unipolar leads and shock coils, which can impair the assessment of coronary arteries, mainly of the right coronary artery (RCA). Artifacts caused by left ventricular (LV) leads of cardiac resynchronization therapy (CRT) systems tend to affect assessment of the left circumflex artery (LCX). By using dual energy CT and postprocessing algorithms, the impact of artifacts can be reduced and diagnostic image quality can be achieved in most cases. Unfortunately, the actual occurrence of such artifacts or the degree of impairment of image quality cannot be reliably predicted.

Prospective Study of Low-Radiation and Low-Iodine Dose Aortic CT Angiography in Obese and Non-Obese Patients: Image Quality and Impact of Patient Characteristics

The purpose of this study was to prospectively analyse image quality and radiation dose of body mass index (BMI)-adapted low-radiation and low-iodine dose CTA of the thoracoabdominal aorta in obese and non-obese patients. This prospective, single-centre study included patients scheduled for aortic CTA between November 2017 and August 2020 without symptoms of high-grade heart failure. A BMI-adapted protocol was used: Group A/Group B, BMI < 30/≥ 30 kg/m2, tube potential 80/100 kVp, total iodine dose 14.5/17.4 g. Intraindividual comparison with the institutional clinical routine aortic CTA protocol was performed. The final study cohort comprised 161 patients (mean 71.1 ± 9.4 years, 32 women), thereof 126 patients in Group A (mean BMI 25.4 ± 2.8 kg/m2) and 35 patients in Group B (34.0 ± 3.4 kg/m2). Mean attenuation over five aortoiliac measurement positions for Group A/B was 354.9 ± 78.2/262.1 ± 73.0 HU. Mean effective dose for Group A/B was 3.05 ± 0.46/6.02 ± 1.14 mSv. Intraindividual comparison in 50 patients demonstrated effective dose savings for Group A/B of 34.4 ± 14.5/25.4 ± 14.1% (both p < 0.001), and iodine dose savings for Group A/B of 54/44.8%. Regression analysis showed that female sex and increasing age were independently associated with higher vascular attenuation. In conclusion, BMI-adapted, low-radiation and low-iodine dose CTA of the thoracoabdominal aorta delivers diagnostic image quality in non-obese and obese patients without symptoms of high-grade heart failure, with superior image quality in females and the elderly.

Clinical applications of cardiac computed tomography: a consensus paper of the European Association of Cardiovascular Imaging-part I

Cardiac computed tomography (CT) was introduced in the late 1990's. Since then, an increasing body of evidence on its clinical applications has rapidly emerged. From an initial emphasis on its technical efficiency and diagnostic accuracy, research around cardiac CT has now evolved towards outcomes-based studies that provide information on prognosis, safety, and cost. Thanks to the strong and compelling data generated by large, randomized control trials, the scientific societies have endorsed cardiac CT as pivotal diagnostic test for the management of appropriately selected patients with acute and chronic coronary syndrome. This consensus document endorsed by the European Association of Cardiovascular Imaging is divided into two parts and aims to provide a summary of the current evidence and to give updated indications on the appropriate use of cardiac CT in different clinical scenarios. This first part focuses on the most established applications of cardiac CT from primary prevention in asymptomatic patients, to the evaluation of patients with chronic coronary syndrome, acute chest pain, and previous coronary revascularization.

SIRM-SIC appropriateness criteria for the use of Cardiac Computed Tomography. Part 1: Congenital heart diseases, primary prevention, risk assessment before surgery, suspected CAD in symptomatic patients, plaque and epicardial adipose tissue characterization, and functional assessment of stenosis

In the past 20 years, Cardiac Computed Tomography (CCT) has become a pivotal technique for the noninvasive diagnostic work-up of coronary and cardiac diseases. Continuous technical and methodological improvements, combined with fast growing scientific evidence, have progressively expanded the clinical role of CCT. Recent large multicenter randomized clinical trials documented the high prognostic value of CCT and its capability to increase the cost-effectiveness of the management of patients with suspected CAD. In the meantime, CCT, initially perceived as a simple non-invasive technique for studying coronary anatomy, has transformed into a multiparametric "one-stop-shop" approach able to investigate the heart in a comprehensive way, including functional, structural and pathophysiological biomarkers. In this complex and revolutionary scenario, it is urgently needed to provide an updated guide for the appropriate use of CCT in different clinical settings. This manuscript, endorsed by the Italian Society of Medical and Interventional Radiology (SIRM) and by the Italian Society of Cardiology (SIC), represents the first of two consensus documents collecting the expert opinion of Radiologists and Cardiologists about current appropriate use of CCT.

Reduction of cardiac motion artifact in step-and-shoot coronary CT angiography with third-generation as compared with second-generation dual-source CT scanners

PURPOSE

We aimed to compare the effects of misregistration (stair-step artifact) occurrence during coronary computed tomography angiography (CCTA) using third- and second-generation dual-source computed tomography (DSCT) scanners. METHODSÇ: CCTA was performed in consecutive patients with suspected coronary heart disease. Patients were randomly assigned to two groups and imaged using a third-generation (n=68; group A) or second-generation (n=63; group B) DSCT scanner. Heart rate (HR), heart rate variability (HRV), the number of acquisition steps required, and the anatomical cardiac length of each patient were recorded and compared between the two groups. Qualitative interpretation and analyses were scored with respect to subjective image quality and misregistration (stair-step artifact) by two interpreters. Cohen's kappa was used to evaluate the consistency between the observers.

RESULTS

All CCTA images (100%) on both DSCT scanners yielded satisfactory image quality, with a subjective image quality score of 4.21±0.17. The consistency between the two observers with respect to misregistration and subjective scores were good (κ= 0.91 and 0.92, respectively). Both the number of acquisition steps required and the scan length of each patient in group A differed significantly (p < 0.001) from those in group B; there were significantly fewer artifacts in group A than in group B (p < 0.001). Misregistration artifacts did not correlate with the HRs or HRVs between two required acquisition steps (p > 0.20).

CONCLUSION

As compared with second-generation DSCT, the reduced number of acquisition steps required and the shorter scan length in third-generation DSCT reduced the occurrence of misregistration artifacts in CCTA images.

Tricuspid annular plane systolic excursion for the evaluation of right ventricular function in functional cardiac CT compared to MRI

AIM

To compare ejection fraction estimated by tricuspid annular plane systolic excursion (TAPSE) using cardiac computed tomography (CT) and cardiac magnetic resonance imaging (MRI) to the non-invasive reference standard, volumetric quantification of right ventricular ejection fraction (RVEF) by cardiac magnetic resonance imaging (MRI).

MATERIALS AND METHODS

Thirty-one patients, who had undergone functional cardiac CT angiogram and cardiac MRI within 12 months, were evaluated retrospectively. Right ventricular (RV) volumes were processed using automated cardiac analysis software for CT, and manually processed by Simpson's method for MRI. MR-TAPSE was defined as the difference in length between two separate reference lines drawn at end diastole and end systole from the lateral tricuspid annulus to the right ventricular apex measured on four-chamber CINE images. CT-TAPSE was determined in an analogous manner on four-chamber reformatted images.

RESULTS

MR-TAPSE correlated moderately with MR-RVEF, (r=0.57, p<0.001). CT-TAPSE was found to correlate moderately well with MR-RVEF (r=0.58, p<0.001) and CT-RVEF (r=0.63, p<0.001). Bland-Altman analysis repeated with various multiplication factors for CT-TAPSE and MR-RVEF, determined a multiplication factor of 2.7 resulted in the lowest bias (0.74%).

CONCLUSION

CT-TAPSE is an easily obtainable parameter of RV function and is correlated with CT-RVEF and MR-RVEF. It can function as a quick check to rapidly validate CT right volumetry and estimate MR-RVEF.

Sequential Strategy Including FFRCT Plus Stress-CTP Impacts on Management of Patients with Stable Chest Pain: The Stress-CTP RIPCORD Study

Stress computed tomography perfusion (Stress-CTP) and computed tomography-derived fractional flow reserve (FFR_CT) are functional techniques that can be added to coronary computed tomography angiography (cCTA) to improve the management of patients with suspected coronary artery disease (CAD). This retrospective analysis from the PERFECTION study aims to assess the impact of their availability on the management of patients with suspected CAD scheduled for invasive coronary angiography (ICA) and invasive FFR. The management plan was defined as optimal medical therapy (OMT) or revascularization and was recorded for the following strategies: cCTA alone, cCTA+FFR_CT, cCTA+Stress-CTP and cCTA+FFR_CT+Stress-CTP. In 291 prospectively enrolled patients, cCTA+FFR_CT, cCTA+Stress-CTP and cCTA+FFR_CT+Stress-CTP showed a similar rate of reclassification of cCTA findings when FFR_CT and Stress-CTP were added to cCTA. cCTA, cCTA+FFR_CT, cCTA+Stress-CTP and cCTA+FFR_CT+Stress-CTP showed a rate of agreement versus the final therapeutic decision of 63%, 71%, 89%, 84% (cCTA+Stress-CTP and cCTA+FFR_CT+Stress-CTP vs cCTA and cCTA+FFR_CT: p < 0.01), respectively, and a rate of agreement in terms of the vessels to be revascularized of 57%, 64%, 74%, 71% (cCTA+Stress-CTP and cCTA+FFR_CT+Stress-CTP vs cCTA and cCTA+FFR_CT: p < 0.01), respectively, with an effective radiation dose (ED) of 2.9 ± 1.3 mSv, 2.9 ± 1.3 mSv, 5.9 ± 2.7 mSv, and 3.1 ± 2.1 mSv. The addition of FFR_CT and Stress-CTP improved therapeutic decision-making compared to cCTA alone, and a sequential strategy with cCTA+FFR_CT+Stress-CTP represents the best compromise in terms of clinical impact and radiation exposure.

The influence of image quality on diagnostic performance of a machine learning-based fractional flow reserve derived from coronary CT angiography

OBJECTIVE

To investigate the effect of image quality of coronary CT angiography (CCTA) on the diagnostic performance of a machine learning-based CT-derived fractional flow reserve (FFR_CT).

METHODS

This nationwide retrospective study enrolled participants from 10 individual centers across China. FFR_CT analysis was performed in 570 vessels in 437 patients. Invasive FFR and FFR_CT values ≤ 0.80 were considered ischemia-specific. Four-score subjective assessment based on image quality and objective measurement of vessel enhancement was performed on a per-vessel basis. The effects of body mass index (BMI), sex, heart rate, and coronary calcium score on the diagnostic performance of FFR_CT were studied.

RESULTS

Among 570 vessels, 216 were considered ischemia-specific by invasive FFR and 198 by FFR_CT. Sensitivity and specificity of FFR_CT for detecting lesion-specific ischemia were 0.82 and 0.93, respectively. Area under the curve (AUC) of high-quality images (0.93, n = 159) was found to be superior to low-quality images (0.80, n = 92, p = 0.02). Objective image quality and heart rate were also associated with diagnostic performance of FFR_CT, whereas there was no statistical difference in diagnostic performance among different BMI, sex, and calcium score groups (all p > 0.05, Bonferroni correction).

CONCLUSIONS

This retrospective multicenter study supported the FFR_CT as a noninvasive test in evaluating lesion-specific ischemia. Subjective image quality, vessel enhancement, and heart rate affect the diagnostic performance of FFR_CT.

KEY POINTS

• FFR_CTcan be used to evaluate lesion-specific ischemia. • Poor image quality negatively affects the diagnostic performance of FFR_CT. • CCTA with ≥ score 3, intracoronary enhancement degree of 300-400 HU, and heart rate below 70 bpm at scanning could be of great benefit to more accurate FFR_CTanalysis.

Simultaneous Assessment of Left Ventricular Function and Coronary Artery Anatomy by Third-generation Dual-source Computed Tomography Using a Low Radiation Dose

BACKGROUND

To assess left ventricular function and coronary artery simultaneously by third-generation dual-source computed tomography (CT) using a low radiation dose.

METHODS

A total of 48 patients (36 men, 12 women; mean age 57.0 ± 9.5 years) who underwent both electrocardiography-gated cardiac CT angiography (CCTA) using 70–90 kVp and echocardiography were included in this retrospective study. The correlation between left ventricular end-diastolic volume (LVEDV), left ventricular end-systolic volume (LVESV), and left ventricular ejection fraction (LVEF) measured using CCTA and echocardiography was determined. The quality of coronary artery images was analyzed using a 4-point scale (1, excellent; 4, poor). The effective radiation dose of CCTA was calculated.

RESULTS

Mean heart rate during the CT examination was 59.9 ± 9.9 bpm (range 38–79) and the body mass index of 48 patients was 24.5 ± 2.6 kg/m² (range 17.0–29.4). LVEDV, LVESV, and LVEF measured using CCTA and echocardiography demonstrated a fair to moderate correlation (Pearson correlation coefficient: r = 0.395, p = 0.005 for LVEDV; r = 0.509. p < 0.001 for LVESV; r = 0.551, p < 0.001 for LVEF). Average image quality score of coronary arteries was 1.0 ± 0.1 (range 1–2). A total of 99.0% (783 of 791) of segments had an excellent image quality score, and 1.0% (8 of 791) of segments had a good score. Mean effective radiation dose was 2.2 ± 0.7 mSv.

CONCLUSIONS

Third-generation dual-source CT using a low tube voltage simultaneously provides information regarding LV function and coronary artery disease at a low radiation dose. It can serve as an alternative option for functional assessment, particularly when other imaging modalities are inadequate.

Low-Dose Radiation Advances in Coronary Computed Tomography Angiography in the Diagnosis of Coronary Artery Disease

Background

Coronary computed tomography angiography (CCTA) is now widely used in the diagnosis of coronary artery disease since it is a rapid, minimally invasive test with a diagnostic accuracy comparable to coronary angiography. However, to meet demands for increasing spatial and temporal resolution, higher x-ray radiation doses are required to circumvent the resulting increase in image noise. Exposure to high doses of ionizing radiation with CT imaging is a major health concern due to the potential risk of radiation-associated malignancy. Given its increasing use, a number of dose saving algorithms have been implemented to CCTA to minimize radiation exposure to “as low as reasonably achievable (ALARA)” without compromising diagnostic image quality.

Objective

The purpose of this review is to outline the most recent advances and current status of dose saving techniques in CCTA.

Method

PubMed, Medline, EMBASE and Scholar databases were searched to identify feasibility studies, clinical trials, and technology guidelines on the technical advances in CT scanner hardware and reconstruction software.

Results

Sub-millisievert (mSv) radiation doses have been reported for CCTA due to a combination of strategies such as prospective electrocardiogram-gating, high-pitch helical acquisition, tube current modulation, tube voltage reduction, heart rate reduction, and the most recent novel adaptive iterative reconstruction algorithms.

Conclusion

Advances in radiation dose reduction without loss of image quality justify the use of CCTA as a non-invasive alternative to coronary catheterization in the diagnosis of coronary artery disease.

Evaluation of non-ECG and ECG-gated computed tomographic angiography for three-dimensional printing of anomalous coronary arteries in dogs with pulmonic stenosis

INTRODUCTION/OBJECTIVES

Coronary artery abnormalities are described sporadically in dogs, most commonly with pulmonic stenosis. Computed tomographic angiography (CTA) allows non-invasive assessment of coronary anatomy. Three-dimensional (3D) models improve the understanding and visualization of spatially complex anatomy. The study objective was to evaluate coronary artery anomalies using CTA imaging and using rapid prototyping technology to create life-sized coronary artery models of these studies.

ANIMALS, MATERIAL AND METHODS

Combined retrospective case and prospective pilot study. Inclusion criteria were dogs with reported coronary artery anomalies. The CTA data sets were imported into a medical imaging framework for the analysis of the coronary arteries and into a 3D-planning and printing software for creating printable 3D models. The 3D models were printed using fusion deposition modeling technology.

RESULTS

Six male dogs with an R2A coronary artery anomaly and pulmonic stenosis diagnosed by CTA were included. Electrocardiogram (ECG)-gated CTA allowed better identification of anomalous coronary arteries than non-gated CTA. In all dogs, the right coronary artery had a smaller diameter than the left and the left coronary artery or its branch had a prepulmonic course. All ECG-gated studies were 3D printed while non-gated studies were not printable due to CTA artifacts.

CONCLUSION

In dogs, CTA is effective for diagnosis of coronary artery anomalies. Printed 3D models of ECG-gated CTA studies were of excellent quality and allowed direct visualization of abnormal coronary artery anatomy. The usefulness of these models to improve the understanding of anomalous coronary artery anatomy could be evaluated in future studies.

Determinants of Rejection Rate for Coronary CT Angiography Fractional Flow Reserve Analysis

Background Coronary artery fractional flow reserve (FFR) derived from CT angiography (FFT_CT) enables functional assessment of coronary stenosis. Prior clinical trials showed 13%-33% of coronary CT angiography studies had insufficient quality for quantitative analysis with FFR_CT. Purpose To determine the rejection rate of FFR_CT analysis and to determine factors associated with technically unsuccessful calculation of FFR_CT. Materials and Methods Prospectively acquired coronary CT angiography scans submitted as part of the Assessing Diagnostic Value of Noninvasive FFR_CT in Coronary Care (ADVANCE) registry (https://ClinicalTrials.gov: NCT02499679) and coronary CT angiography series submitted for clinical analysis were included. The primary outcome was the FFR_CT rejection rate (defined as an inability to perform quantitative analysis with FFR_CT). Factors that were associated with FFR_CT rejection rate were assessed with multiple linear regression. Results In the ADVANCE registry, FFR_CT rejection rate due to inadequate image quality was 2.9% (80 of 2778 patients; 95% confidence interval [CI]: 2.1%, 3.2%). In the 10 621 consecutive patients who underwent clinical analysis, the FFR_CT rejection rate was 8.4% (n = 892; 95% CI: 6.2%, 7.2%; P < .001 vs the ADVANCE cohort). The main reason for the inability to perform FFR_CT analysis was the presence of motion artifacts (63 of 80 [78%] and 729 of 892 [64%] in the ADVANCE and clinical cohorts, respectively). At multivariable analysis, section thickness in the ADVANCE (odds ratio [OR], 1.04; 95% CI: 1.001, 1.09; P = .045) and clinical (OR, 1.03; 95% CI: 1.02, 1.04; P < .001) cohorts and heart rate in the ADVANCE (OR, 1.05; 95% CI: 1.02, 1.08; P < .001) and clinical (OR, 1.06; 95% CI: 1.05, 1.07; P < .001) cohorts were independent predictors of rejection. Conclusion The rates for technically unsuccessful CT-derived fractional flow reserve in the ADVANCE registry and in a large clinical cohort were 2.9% and 8.4%, respectively. Thinner CT section thickness and lower patient heart rate may increase rates of completion of CT fractional flow reserve analysis. Published under a CC BY 4.0 license. Online supplemental material is available for this article. See also the editorial by Sakuma in this issue.

Modified Subtraction Coronary CT Angiography with a Two-Breathhold Technique: Image Quality and Diagnostic Accuracy in Patients with Coronary Calcifications

OBJECTIVE

To evaluate a modified subtraction coronary computed tomography angiography (CCTA) technique with a two-breathhold approach in terms of image quality and stenosis grading of calcified coronary segments and in the detection of significant coronary stenosis in segments with severe calcification.

MATERIALS AND METHODS

The institutional board approved this study, and all subjects provided written consent. A total of 128 patients were recruited into this trial, of which 32 underwent subtraction CCTA scans and invasive coronary angiography (ICA). The average Agatston score was 356 ± 145. In severely calcified coronary segments, the presence of significant (> 50%) stenosis was assessed on both conventional CCTA and subtraction CCTA images, and the results were finally compared with ICA findings as the gold standard.

RESULTS

For severely calcified segments, the image quality in conventional CCTA significantly improved from 2.51 ± 0.98 to 3.12 ± 0.94 in subtraction CCTA (p < 0.001). In target segments, specificity (70% vs. 87%; p = 0.005) and positive predictive value (61% vs. 79%, p < 0.01) were improved using subtraction CCTA in comparison with conventional CCTA, with no loss in the negative predictive value. The segment-based diagnostic accuracy for detecting significant stenosis was significantly better in subtraction CCTA than in conventional CCTA (area under the receiver operating characteristic curve, 0.94 vs. 0.85; p = 0.03).

CONCLUSION

This modified subtraction CCTA method showed lower misregistration and better image quality in patients with limited breathhold capability. In comparison with conventional CCTA, modified subtraction CCTA would allow stenosis regrading and improve the diagnostic accuracy in coronary segments with severe calcification.

Diagnosis of obstructive coronary artery disease using computed tomography angiography in patients with stable chest pain depending on clinical probability and in clinically important subgroups: meta-analysis of individual patient data

OBJECTIVE

To determine whether coronary computed tomography angiography (CTA) should be performed in patients with any clinical probability of coronary artery disease (CAD), and whether the diagnostic performance differs between subgroups of patients.

DESIGN

Prospectively designed meta-analysis of individual patient data from prospective diagnostic accuracy studies.

DATA SOURCES

Medline, Embase, and Web of Science for published studies. Unpublished studies were identified via direct contact with participating investigators.

ELIGIBILITY CRITERIA FOR SELECTING STUDIES

Prospective diagnostic accuracy studies that compared coronary CTA with coronary angiography as the reference standard, using at least a 50% diameter reduction as a cutoff value for obstructive CAD. All patients needed to have a clinical indication for coronary angiography due to suspected CAD, and both tests had to be performed in all patients. Results had to be provided using 2×2 or 3×2 cross tabulations for the comparison of CTA with coronary angiography. Primary outcomes were the positive and negative predictive values of CTA as a function of clinical pretest probability of obstructive CAD, analysed by a generalised linear mixed model; calculations were performed including and excluding non-diagnostic CTA results. The no-treat/treat threshold model was used to determine the range of appropriate pretest probabilities for CTA. The threshold model was based on obtained post-test probabilities of less than 15% in case of negative CTA and above 50% in case of positive CTA. Sex, angina pectoris type, age, and number of computed tomography detector rows were used as clinical variables to analyse the diagnostic performance in relevant subgroups.

RESULTS

Individual patient data from 5332 patients from 65 prospective diagnostic accuracy studies were retrieved. For a pretest probability range of 7-67%, the treat threshold of more than 50% and the no-treat threshold of less than 15% post-test probability were obtained using CTA. At a pretest probability of 7%, the positive predictive value of CTA was 50.9% (95% confidence interval 43.3% to 57.7%) and the negative predictive value of CTA was 97.8% (96.4% to 98.7%); corresponding values at a pretest probability of 67% were 82.7% (78.3% to 86.2%) and 85.0% (80.2% to 88.9%), respectively. The overall sensitivity of CTA was 95.2% (92.6% to 96.9%) and the specificity was 79.2% (74.9% to 82.9%). CTA using more than 64 detector rows was associated with a higher empirical sensitivity than CTA using up to 64 rows (93.4% v 86.5%, P=0.002) and specificity (84.4% v 72.6%, P<0.001). The area under the receiver-operating-characteristic curve for CTA was 0.897 (0.889 to 0.906), and the diagnostic performance of CTA was slightly lower in women than in with men (area under the curve 0.874 (0.858 to 0.890) v 0.907 (0.897 to 0.916), P<0.001). The diagnostic performance of CTA was slightly lower in patients older than 75 (0.864 (0.834 to 0.894), P=0.018 v all other age groups) and was not significantly influenced by angina pectoris type (typical angina 0.895 (0.873 to 0.917), atypical angina 0.898 (0.884 to 0.913), non-anginal chest pain 0.884 (0.870 to 0.899), other chest discomfort 0.915 (0.897 to 0.934)).

CONCLUSIONS

In a no-treat/treat threshold model, the diagnosis of obstructive CAD using coronary CTA in patients with stable chest pain was most accurate when the clinical pretest probability was between 7% and 67%. Performance of CTA was not influenced by the angina pectoris type and was slightly higher in men and lower in older patients.

SYSTEMATIC REVIEW REGISTRATION

PROSPERO CRD42012002780.

Functional and Anatomical Testing in Intermediate Risk Chest Pain Patients with a High Coronary Calcium Score: Rationale and Design of the FACC Study

Current guidelines do not recommend coronary computed tomography angiography (CCTA) in patients with high levels of coronary calcium, as severe calcification leads to difficulties in estimating stenosis severity due to blooming artifacts obscuring the vessel lumen. Whether the CCTA-derived fractional flow reserve (FFRCT) improves the diagnostic performance of CCTA in patients with high levels of coronary calcification has not been sufficiently evaluated. We hypothesize that a noninvasive diagnostic strategy using FFRCT will perform comparably to an invasive diagnostic strategy in the detection of hemodynamically significant coronary artery disease (CAD) in clinical stable chest pain patients with high levels of coronary calcium. In this prospective, blinded, multicenter study, patients with suspected stable CAD referred for CCTA and demonstrating an Agatston score >399 will be included. Patients accepting inclusion will, in addition to CCTA, undergo invasive coronary angiography (ICA) and invasive FFR measurement. FFRCT analyses are performed by an external core laboratory blinded to any patient data, and the FFRCT results are blinded to all participating study sites. The primary objective is to evaluate whether FFRCT can identify patients with and without hemodynamically significant CAD, when ICA with FFR is the reference standard. A negative study result would question the clinical usefulness of FFRCT in patients with high levels of coronary calcium. A positive study result, however, would imply a reduction in the number of patients referred for coronary catheterization and, at the same time, increase the proportion of patients with hemodynamically significant CAD at the subsequent invasive examination.

Low-radiation and high image quality coronary computed tomography angiography in “real-world” unselected patients

AIM

To determine the radiation dose and image quality in coronary computed tomography angiography (CCTA) using state-of-the-art dose reduction methods in unselected “real world” patients.

METHODS

In this single-centre study, consecutive patients in sinus rhythm underwent CCTA for suspected coronary artery disease (CAD) using a 320-row detector CT scanner. All patients underwent the standard CT acquisition protocol at our institute (Morriston Hospital) a combination of dose saving advances including prospective electrocardiogram-gating, automated tube current modulation, tube voltage reduction, heart rate reduction, and the most recent novel adaptive iterative dose reconstruction 3D (AIDR3D) algorithm. The cohort comprised real-world patients for routine CCTA who were not selected on age, body mass index, or heart rate. Subjective image quality was graded on a 4-point scale (4 = excellent, 1 = non-diagnostic).

RESULTS

A total of 543 patients were included in the study with a mean body weight of 81 ± 18 kg and a pre-scan mean heart rate of 70 ± 11 beats per minute (bpm). When indicated, patients received rate-limiting medication with an oral beta-blocker followed by additional intravenous beta-blocker to achieve a heart rate below 65 bpm. The median effective radiation dose was 0.88 mSv (IQR, 0.6-1.4 mSv) derived from a Dose Length Product of 61.45 mGy.cm (IQR, 42.86-100.00 mGy.cm). This also includes what we believe to be the lowest ever-reported radiation dose for a routine clinical CCTA (0.18 mSv). The mean image quality (± SD) was 3.65 ± 0.61, with a subjective image quality score of 3 (“good”) or above for 93% of patient CCTAs.

CONCLUSION

Combining a low-dose scan protocol and AIDR3D with a 320-detector row CT scanner can provide high quality images at exceptionally low radiation dose in unselected patients being investigated for CAD.

Prognostic Value and Therapeutic Perspectives of Coronary CT Angiography: A Literature Review

Coronary stenosis severity is both a powerful and a still debated predictor of prognosis in coronary artery disease. Coronary computed tomographic angiography (CCTA) has emerged as a noninvasive technique that enables anatomic visualization of coronary artery disease (CAD). CCTA with newer applications, plaque characterization and physiologic/functional evaluation, allows a comprehensive diagnostic and prognostic assessment of otherwise low-intermediate subjects for primary prevention. CCTA measures the overall plaque burden, differentiates plaque subtypes, and identifies high-risk plaque with good reproducibility. Research in this field may also advance towards an era of personalized risk prediction and individualized medical therapy. It has been demonstrated that statins may delay plaque progression and change some plaque features. The potential effects on plaque modifications induced by other medical therapies have also been investigated. Although it is not currently possible to recommend routinely serial scans to monitor the therapeutic efficacy of medical interventions, the plaque modulation, as a part of risk modification, appears a feasible strategy. In this review we summarize the current evidence regarding vulnerable plaque and effects of lipid lowering therapy on morphological features of CAD. We also discuss the potential ability of CCTA to characterize coronary atherosclerosis, stratify prognosis of asymptomatic subjects, and guide medical therapy.

Image Quality, Overall Evaluability, and Effective Radiation Dose of Coronary Computed Tomography Angiography With Prospective Electrocardiographic Triggering Plus Intracycle Motion Correction Algorithm in Patients With a Heart Rate Over 65 Beats Per Minute

PURPOSE

Recently, a new intracycle motion correction algorithm (MCA) was introduced to reduce motion artifacts from heart rate (HR) in coronary computed tomography angiography (cCTA). The aim of the study was to evaluate the image quality, overall evaluability, and effective radiation dose (ED) of cCTA with prospective electrocardiographic (ECG) triggering plus MCA as compared with standard protocol with retrospective ECG triggering in patients with HR≥65 bpm.

MATERIALS AND METHODS

One hundred consecutive patients (67±10 y) scheduled for cCTA with 65<HR<80 bpm were retrospectively analyzed. The patients were assigned to 2 groups undergoing prospective (group 1) or retrospective (group 2) triggered cCTA. The study protocol was approved by the Institutional Ethics Committee and a written informed consent was obtained from all patients. Image noise, signal to noise ratio, contrast to noise ratio, Likert image quality score (score 1, nondiagnostic; score 2, adequate; score 3, good; score 4, excellent), overall image evaluability, and ED were measured and compared between the 2 groups. Both vessel-based and patient-based analyses were evaluated. Student test or Wilcoxon test were used to evaluate differences of continuous variables, whereas the χ test was used to study differences with regard to categorical data. A P-value <0.05 was considered statistically significant.

RESULTS

cCTA was successfully performed in all patients. In a segment-based model, group 1 compared with group 2 showed a lower rate of overall artifacts (67% vs. 83%; P<0.001) and motion artifacts (49% vs. 66%; P<0.001), resulting in a better Likert image quality score (2.83±1.03 vs. 2.37±1.02; P<0.01) and overall evaluability (85% vs. 75%; P<0.01). Group 1 showed a lower ED as compared with group 2 (3.1±1.9 vs. 11.9±3.3 mSv; P<0.01).

CONCLUSION

MCA and cCTA with prospective ECG-triggering acquisition in patients with high HR improves image quality and overall evaluability compared with cCTA with standard retrospective ECG triggering.

Reduction of Coronary Motion Artifacts in Prospectively Electrocardiography-Gated Coronary Computed Tomography Angiography Using Monochromatic Imaging at Various Energy Levels in Combination With a Motion Correction Algorithm on Single-Source Fast Tube Voltage Switching Dual-Energy Computed Tomography: A Phantom Experiment

OBJECTIVES

The aim of this study was to assess the effect of monochromatic imaging at various energy levels in combination with a motion correction algorithm (MCA) in single-source dual-energy coronary computed tomography angiography (CCTA) with fast switching of tube voltage on the reduction of coronary motion artifacts (CMA) in a phantom setting.

MATERIALS AND METHODS

Using this dual-energy computed tomography technique with a phantom comprising models of coronary vessels filled with contrast medium and pulsating at constant heart rates of 60 to 100 beats per minute, we reconstructed monochromatic images of CCTA obtained at 50 to 90 keV with and without use of MCA. Cardiac motion was modeled by simulating the in vivo time-volume curve of the left ventricle. Two independent readers graded CMA in 9 coronary segments using a 5-point scale (1, poor; 3 to 5, interpretable; 5, excellent). At each heart rate, we compared the average score of CMA between images obtained at 50 to 90 keV with and without use of MCA using Wilcoxon signed rank test, and we compared the score among images obtained at 50 to 90 keV with use of MCA using Kruskal-Wallis and post hoc tests. We also compared the percentages of image interpretability and improvement in image interpretability among images obtained at 50 to 90 keV with use of MCA.

RESULTS

With the use of MCA, the average score of CMA was significantly higher for images obtained at each energy level from 50 to 70 keV (P < 0.05) and was comparable at 80 and 90 keV, and it was comparable among those obtained at 50 to 70 keV. With its use, the percentages of image interpretability were similarly high at 50 to 70 keV at 60 to 80 beats per minute (78%-100%), and they were higher at 50 to 60 keV (72%-83%) than at 70 keV at 90 to 100 beats per minute (50%-56%). The percentages of improved image interpretability with MCA were similarly high at 50 to 70 keV at 60 to 80 beats per minute (56%-100%), and they were higher at 50 to 60 keV (62%-77%) than at 70 keV at 90 to 100 beats per minute (36%-43%). The percentages of image interpretability and improved image interpretability with MCA were insufficient at 80 and 90 keV.

CONCLUSIONS

Coronary motion artifacts were significantly reduced in images of monochromatic CCTA obtained at 50 to 70 keV in combination with MCA compared with those obtained without MCA, and the percentages of image interpretability and improved image interpretability with use of MCA were relatively high at 50 to 70 keV, and particularly at 50 to 60 keV, even at 90 to 100 beats per minute.

CT angiography to evaluate coronary artery disease and revascularization requirement before trans-catheter aortic valve replacement

BACKGROUND

Coronary artery disease (CAD) and aortic stenosis share pathophysiological mechanisms and risk factors. We evaluated the clinical utility of coronary computed tomography angiography (CTA) to identify CAD and revascularization requirement in patients with severe aortic stenosis considered for transcatheter aortic valve replacement (TAVR).

METHODS

Consecutive patients without known CAD underwent calcium scoring, CTA and invasive coronary angiography (ICA). A second-generation dual-source CT scanner was used. ICA-quantitative coronary angiography (QCA) served as reference standard. CAD was reported using a lenient threshold of ≥50% and a stricter threshold of ≥70% diameter reduction. Findings of ≥70% diameter reduction and of high-risk CAD were used to predict revascularization.

RESULTS

The study included 140 patients [68 males; 82.3 (7.7) years]. CAD defined by the 50% threshold on ICA was found in 58/140 (41%) patients. CAD by the 70% threshold was found in 23/140 (16%) patients. High-risk CAD was found in 16/140 (11%) patients. CTA and ICA had similar odd-ratios of 3.22 (1.26-8.23) and 4.62 (1.64-13.05), respectively, in predicting revascularization. Forty-two/140 (30%) patients had <400 Agatston calcium score, 98/140 (70%) patients had ≥400 calcium score. The diagnostic performance of CTA in the low calcium score group was better than the high calcium score group (AUC 0.81 vs. 0.63).

CONCLUSION

CTA remained questionable to rule-out CAD as gatekeeper to ICA in TAVR candidates who had severe coronary calcifications. In patients with less severe coronary calcifications, accounting for 30% of participants in this study, CTA may play a clinical role.

Sequential SPECT/CT imaging for detection of coronary artery disease in a large cohort: evaluation of the need for additional imaging and radiation exposure

BACKGROUND

Performing both single photon emission computerized tomography (SPECT) and coronary computed tomography angiography (CCTA) in patients suspected for coronary artery disease (CAD) leads to increased radiation exposure. We evaluated the need for additional imaging and following implications for radiation exposure of a sequential SPECT/computed tomography (CT) algorithm.

METHODS AND RESULTS

5018 consecutive patients without history of CAD were referred for stress-first SPECT and coronary artery calcium (CAC) scoring. If stress SPECT was abnormal, additional rest SPECT and, if feasible, CCTA were acquired. Stress SPECT was normal in 2617 patients (52%). CCTA was not performed in 1289 of the 2401 patients referred for additional imaging (54%), mainly because of severe CAC (47%) or fast/irregular heart rate (22%). 642 patients with abnormal SPECT underwent CCTA, which excluded significant CAD in 378 patients (59%). Mean radiation dose was 4.5 ± 0.3 mSv for stress-only imaging and 13.2 ± 3.3 mSv for additional imaging (P < 0.001).

CONCLUSIONS

Half of the patients do not require additional imaging in our sequential SPECT/CT algorithm, which is accompanied with low radiation exposure. CCTA cannot be performed in half of the patients who undergo additional imaging because of (relative) contra-indications. CCTA is able to correct for false-positive SPECT findings in our algorithm.

Artifacts at Cardiac CT: Physics and Solutions

Computed tomography is vulnerable to a wide variety of artifacts, including patient- and technique-specific artifacts, some of which are unique to imaging of the heart. Motion is the most common source of artifacts and can be caused by patient, cardiac, or respiratory motion. Cardiac motion artifacts can be reduced by decreasing the heart rate and variability and the duration of data acquisition; adjusting the placement of the data window within a cardiac cycle; performing single-heartbeat scanning; and using multisegment reconstruction, motion-correction algorithms, and electrocardiographic editing. Respiratory motion artifacts can be minimized with proper breath holding and shortened scan duration. Partial volume averaging is caused by the averaging of attenuation values from all tissue contained within a voxel and can be reduced by improving the spatial resolution, using a higher x-ray energy, or displaying images with a wider window width. Beam-hardening artifacts are caused by the polyenergetic nature of the x-ray beam and can be reduced by using x-ray filtration, applying higher-energy x-rays, altering patient position, modifying contrast material protocols, and applying certain reconstruction algorithms. Metal artifacts are complex and have multiple causes, including x-ray scatter, underpenetration, motion, and attenuation values that exceed the typical dynamic range of Hounsfield units. Quantum mottle or noise is caused by insufficient penetration of tissue and can be improved by increasing the tube current or peak tube potential, reconstructing thicker sections, increasing the rotation time, using appropriate patient positioning, and applying iterative reconstruction algorithms. ^©RSNA, 2016.

Can Discrepancies Between Coronary Computed Tomography Angiography and Cardiac Catheterization in High-Risk Patients be Overcome With Consensus Reading?

OBJECTIVE

To assess the incidence and cause of discrepancies between coronary computed tomography angiography (CTA) and catheterization in a high-risk, diverse, predominantly overweight inner-city population.

METHODS

Ninety-two patients who underwent coronary CTA and catheterization on March 2007 to December 2012 were retrospectively identified. Clinical coronary CTA interpretation and reinterpretation by a review panel was compared with catheterization results.

RESULTS

Severe stenosis was present on catheterization in 65% (60/92). Clinical coronary CTA was concordant with catheterization for severe stenosis in 78% (72/92), whereas panel interpretation was concordant in 77% (70/91). Sensitivity and specificity of clinical and panel coronary CTA interpretations were 92% (55/60) and 53% (17/32) versus 82% (48/59) and 68% (22/32), respectively.

CONCLUSIONS

Both coronary CTA interpretations were concordant with catheterization for severe stenosis in three quarters of patients. However, the diagnostic profile of the 2 interpretations differed, with higher sensitivity for the clinical report. This supports the clinical practice, which favored overestimation of difficult to quantify stenoses.

Changes in Medical Management after Coronary CT Angiography

Introduction

Coronary computed tomography angiography (CCTA) allows for non-invasive coronary artery disease (CAD) phenotyping. There are still some uncertainties regarding the impact this knowledge has on the clinical care of patients.

Objective

To determine whether CAD phenotyping by CCTA influences clinical decision making by the prescription of cardiovascular drugs and their impact on non-LDL cholesterol (NLDLC) levels.

Methods

We analysed consecutive patients from 2008 to 2011 submitted to CCTA without previous diagnosis of CAD that had two serial measures of NLDLC, one up to 3 months before CCTA and the second from 3 to 6 months after.

Results

A total of 97 patients were included, of which 69% were men, mean age 64 ± 12 years. CCTA revealed that 18 (18%) patients had no CAD, 38 (39%) had non-obstructive (< 50%) lesions and 41 (42%) had at least one obstructive ≥ 50% lesion. NLDLC was similar at baseline between the grups (138 ± 52 mg/dL vs. 135 ± 42 mg/dL vs. 131 ± 44 mg/dL, respectively, p = 0.32). We found significative reduction in NLDLC among patients with obstrctive lesions (-18%, p = 0.001). We also found a positive relationship between clinical treatment intensification with aspirin and cholesterol reducing drugs and the severity of CAD.

Conclusion

Our data suggest that CCTA results were used for cardiovascular clinical treatment titration, with especial intensification seen in patients with obstructive ≥50% CAD.

Improved image quality at 256-slice coronary CT angiography in patients with a high heart rate and coronary artery disease: comparison with 64-slice CT imaging

BACKGROUND

The 256-slice computed tomography (CT) scanners with wider detector coverage and faster gantry rotation speed are now available. The performance of scanners that feature a rotation speed of 270 ms at coronary CT angiography (CCTA) has not been evaluated in patients with a higher heart rate.

PURPOSE

To evaluate the image quality of 256-slice CT with faster gantry rotation speed in patients undergoing CCTA.

MATERIAL AND METHODS

We enrolled 886 patients; 357(40.3%) underwent study on a 64-slice CT at a rotation speed of 420 ms, the other 529 (59.7%) were examined using a 256-slice CT scanner at 270 ms. Two observers judged the image quality of 2658 imaged coronary arteries on a 4-point scale.

RESULTS

The mean image quality score was significantly higher for the 256 - than the 64-slice CT scans (3.94 ± 0.28 vs. 3.73 ± 0.61; P < 0.01). There was no significant difference in the image quality scores between 64 - and 256-slice scans in patients whose heart rate (HR) was <60 bpm. However, in patients whose HR exceeded 60 bpm these scores were significantly higher for 256-slice CT images (P < 0.01).

CONCLUSION

CCTA performed on the 256-slice CT scanner yielded significantly better image quality in patients with an HR exceeding 60 bpm.

Influence of Coronary Calcification on the Diagnostic Performance of CT Angiography Derived FFR in Coronary Artery Disease: A Substudy of the NXT Trial

OBJECTIVES

The goal of this study was to examine the diagnostic performance of noninvasive fractional flow reserve (FFR) derived from coronary computed tomography angiography (CTA) (FFRCT) in relation to coronary calcification severity.

BACKGROUND

FFRCT has shown promising results in identifying lesion-specific ischemia. The extent to which the severity of coronary calcification affects the diagnostic performance of FFRCT is not known.

METHODS

Coronary calcification was assessed by using the Agatston score (AS) in 214 patients suspected of having coronary artery disease who underwent coronary CTA, FFRCT, and FFR (FFR examination was performed in 333 vessels). The diagnostic performance of FFRCT (≤0.80) in identifying vessel-specific ischemia (FFR ≤0.80) was investigated across AS quartiles (Q1 to Q4) and for discrimination of ischemia in patients and vessels with a low-mid AS (Q1 to Q3) versus a high AS (Q4). Coronary CTA stenosis was defined as lumen reduction >50%.

RESULTS

Mean ± SD per-patient and per-vessel AS were 302 ± 468 (range 0 to 3,599) and 95 ± 172 (range 0 to 1,703), respectively. There was no statistical difference in diagnostic accuracy, sensitivity, or specificity of FFRCT across AS quartiles. Discrimination of ischemia by FFRCT was high in patients with a high AS (416 to 3,599) and a low-mid AS (0 to 415), with no difference in area under the receiver-operating characteristic curve (AUC) (0.86 [95% confidence interval (CI): 0.76 to 0.96] vs. 0.92 [95% CI: 0.88 to 0.96]) (p = 0.45). Similarly, discrimination of ischemia by FFRCT was high in vessels with a high AS (121 to 1,703) and a low-mid AS (0 to 120) (AUC: 0.91 [95% CI: 0.85 to 0.97] vs. 0.95 [95% CI: 0.91 to 0.98]; p = 0.65). Diagnostic accuracy and specificity of FFRCT were significantly higher than for stenosis assessment in each AS quartile at the per-patient (p < 0.001) and per-vessel (p < 0.05) level with similar sensitivity. In vessels with a high AS, FFRCT exhibited improved discrimination of ischemia compared with coronary CTA alone (AUC: 0.91 vs. 0.71; p = 0.004), whereas on a per-patient level, the difference did not reach statistical significance (AUC: 0.86 vs. 0.72; p = 0.09).

CONCLUSIONS

FFRCT provided high and superior diagnostic performance compared with coronary CTA interpretation alone in patients and vessels with a high AS.

Impact of an intra-cycle motion correction algorithm on overall evaluability and diagnostic accuracy of computed tomography coronary angiography

OBJECTIVES

The aim of this study was to evaluate the impact of a novel intra-cycle motion correction algorithm (MCA) on overall evaluability and diagnostic accuracy of cardiac computed tomography coronary angiography (CCT).

METHODS

From a cohort of 900 consecutive patients referred for CCT for suspected coronary artery disease (CAD), we enrolled 160 (18 %) patients (mean age 65.3 ± 11.7 years, 101 male) with at least one coronary segment classified as non-evaluable for motion artefacts. The CCT data sets were evaluated using a standard reconstruction algorithm (SRA) and MCA and compared in terms of subjective image quality, evaluability and diagnostic accuracy.

RESULTS

The mean heart rate during the examination was 68.3 ± 9.4 bpm. The MCA showed a higher Likert score (3.1 ± 0.9 vs. 2.5 ± 1.1, p < 0.001) and evaluability (94%vs.79 %, p < 0.001) than the SRA. In a 45-patient subgroup studied by clinically indicated invasive coronary angiography, specificity, positive predictive value and accuracy were higher in MCA vs. SRA in segment-based and vessel-based models, respectively (87%vs.73 %, 50%vs.34 %, 85%vs.73 %, p < 0.001 and 62%vs.28 %, 66%vs.51 % and 75%vs.57 %, p < 0.001). In a patient-based model, MCA showed higher accuracy vs. SCA (93%vs.76 %, p < 0.05).

CONCLUSIONS

MCA can significantly improve subjective image quality, overall evaluability and diagnostic accuracy of CCT.

KEY POINTS

Cardiac computed tomographic coronary angiography (CCT) allows non-invasive evaluation of coronary arteries. Intra-cycle motion correction algorithm (MCA) allows for compensation of coronary motion. An MCA improves image quality, CCT evaluability and diagnostic accuracy.

Functional relevance of coronary artery disease by cardiac magnetic resonance and cardiac computed tomography: myocardial perfusion and fractional flow reserve

Coronary artery disease (CAD) is one of the leading causes of morbidity and mortality and it is responsible for an increasing resource burden. The identification of patients at high risk for adverse events is crucial to select those who will receive the greatest benefit from revascularization. To this aim, several non-invasive functional imaging modalities are usually used as gatekeeper to invasive coronary angiography, but the diagnostic yield of elective invasive coronary angiography remains unfortunately low. Stress myocardial perfusion imaging by cardiac magnetic resonance (stress-CMR) has emerged as an accurate technique for diagnosis and prognostic stratification of the patients with known or suspected CAD thanks to high spatial and temporal resolution, absence of ionizing radiation, and the multiparametric value including the assessment of cardiac anatomy, function, and viability. On the other side, cardiac computed tomography (CCT) has emerged as unique technique providing coronary arteries anatomy and more recently, due to the introduction of stress-CCT and noninvasive fractional flow reserve (FFR-CT), functional relevance of CAD in a single shot scan. The current review evaluates the technical aspects and clinical experience of stress-CMR and CCT in the evaluation of functional relevance of CAD discussing the strength and weakness of each approach.

Correlation between low tube voltage in dual source CT coronary artery imaging with image quality and radiation dose

The influence of low tube voltage in dual source CT (DSCT) coronary artery imaging on image quality and radiation dose and its application value in clinical practice were investigated. Totally, 300 cases of chest pain with low body mass index (BMI <18.5 kg/m(2)) subjected to DSCT coronary artery imaging were prospectively enrolled. The heart rate in all patients were greater than 65/min. The retrospective ECG gated scanning mode and simple random sampling method were used to assign the patients into groups A, B and C (n=100 each). The patients in groups A, B and C experienced 120-, 100-, and 80-kV tube voltage imaging respectively, and the image quality was evaluated. The CT volume dose index (CTDIvol) and dose length product (DLP) were recorded, and the effective dose (ED) was calculated in each group. The image quality scores and radiation doses in groups were compared, and the influence of tube voltage on image quality and radiation dose was analyzed. The results showed that the excellent rate of image quality in groups A, B and C was 95.69%, 94.72% and 96.33% respectively with the difference being not statistically significant among the three groups (P>0.05). The CTDIvol values in groups A, B and C were 51.35±12.21, 21.28±7.13 and 6.34±3.34 mGy, respectively, with the difference being statistically significant (P<0.05). The ED values in groups A, B and C were 9.27±1.63, 4.56±2.29 and 2.29±1.69 mSv, respectively, with the difference being statistically significant (P<0.05). It was suggested that for the patients with low BMI, the application of DSCT coronary artery imaging with low tube voltage can obtain satisfactory image quality, and simultaneously, significantly reduce the radiation dose.

Heart rate control with single administration of a long-acting β-blocker at bedtime before coronary computed tomography angiography

BACKGROUND

Beta-blockers are used to control the heart rate prior to coronary computed tomography (CT) angiography. However, in-hospital administration is time-consuming, and it is hard to decrease the heart rate to <60 beats per minute (bpm) when the initial heart rate is increased. In this study, we examined whether the single administration of long-acting β-blocker at bedtime before angiography is effective for achieving the target heart rate.

METHODS AND RESULTS

A total of 314 consecutive patients with a resting heart rate >60bpm who underwent coronary CT angiography were retrospectively collected. Either bisoprolol or atenolol was orally administered the night before to 166 patients (beta group), and no additional medication was administered to the other 148 patients (control group). When the heart rate was >60bpm on arrival, a β-blocker or verapamil was orally administered at the discretion of the physician. Although the baseline heart rate was not significantly different between the groups, the β-blocker treatment the night before significantly reduced the heart rate compared to control group upon arrival at the hospital and at the time of angiography. The rate of achievement of a heart rate ≤60bpm on arrival at the hospital was significantly higher in the beta group, and even after the additional treatment.

CONCLUSIONS

Bedtime administration of a long-acting β-blocker the night before coronary CT angiography is an effective option to achieve the target heart rate at the time of examination.

Image quality with single-heartbeat 320-multidetector computed tomographic coronary angiography

OBJECTIVE

We aimed to establish the feasibility of single-heartbeat 320-multidetector computed tomographic coronary angiography (CTCA) and assess variables affecting image quality.

METHODS

Consecutive patients (n = 249, 38% male) underwent CTCA. Two observers assessed image quality using a 4-point scale (1, excellent; 4, poor).

RESULTS

Mean heart rate was 60 beats per minute (95% confidence interval, 59-62); body mass index, 29 kg/m (28-30); and dose-length product, 283 mGy·cm (266-301). During scanning, 133 (51%) received sublingual glyceryl trinitrate (GTN), 9 (4%) had ectopics, and 12 (5%) had atrial fibrillation. Diagnostic image quality was obtained in 99% with mean image quality of 1.4 (1.3, 1.5). Age, sex, atrial fibrillation, ectopics, diabetes mellitus (12%), and obstructive disease were not related to image quality. A lower heart rate and GTN were associated with improved image quality (P ≤ 0.001).

CONCLUSIONS

Optimal image quality in single-heartbeat 320-multidetector CTCA is achievable in 99% of unselected patients. Image quality is improved by lower heart rate and GTN.

Detection of coronary artery disease using coronary flow velocity reserve by transthoracic Doppler echocardiography versus multidetector computed tomography coronary angiography: influence of calcium score

BACKGROUND

There have been no clinical data specifying the degree of calcium deposition at which coronary flow velocity reserve (CFVR) measurement using transthoracic Doppler echocardiography surpasses 320-row multidetector computed tomographic coronary angiography (CTCA) in detecting obstructive coronary artery disease.

METHODS

One hundred seventy patients who underwent invasive coronary angiography, transthoracic Doppler echocardiography, and CTCA were prospectively enrolled. Coronary artery stenosis was defined as percentage diameter stenosis ≥ 50% on invasive coronary angiography. CFVR < 2.0 and narrowing ≥ 50% measured with CTCA were the thresholds indicating the presence of coronary artery stenosis. The degree of coronary artery calcification was also assessed using the Agatston calcium score method by computed tomography.

RESULTS

The majority of patients (89%) were classified as having either high or intermediate pretest probability of coronary artery disease. Significant coronary artery stenoses by invasive coronary angiography were found in 71 patients and 104 vessels. Although the overall diagnostic performance of CTCA was comparable with that of CFVR measurement for detecting coronary artery stenosis, only the diagnostic performance of CTCA was negatively affected by the extent of a patient's coronary artery calcification. Receiver operating characteristic curve analysis indicated that only CFVR measurement is diagnostically accurate when calcium scores are >319 in the patient-based assessment, 189 for the left anterior descending coronary artery, 98 for the left circumflex coronary artery and 282 for the right coronary artery.

CONCLUSIONS

Transthoracic Doppler echocardiography and 320-row multidetector CTCA successfully diagnosed significant coronary artery stenosis with high feasibility and accuracy. However, only the diagnostic performance of CTCA was negatively affected by the extent of a patient's coronary artery calcification, and therefore the diagnostic performance of CFVR measurement for detecting coronary artery stenosis surpassed that of CTCA when the calcium score exceeded specified cutoff values.