The effect of location/site on polished human enamel after mechanical and chemical wear

OBJECTIVE

To compare profilometry and microhardness of polished occlusal and buccal human enamel following a mechanical and chemical wear regime.

METHODS

Enamel from polished human molars were sectioned into buccal and occlusal surfaces and randomly allocated into two groups (n = 10) and then exposed to 0.3 % citric acid at pH 2.7 for 10, 20, 40 and 60 mins each followed by abrasion with non-fluoridated toothpaste for 240 strokes in a reciprocating brushing machine. A white light profilometer with a spot size of 12 um measured mean step-height following each cycle. Microhardness indentations were conducted following the final cycled 60 mins erosion/abrasion using 0.01, 0.02, 0.1, 0.5 and 2.5 kgf indentation load. Statistical disparity were evaluated using a two-way ANOVA and post-hoc Sidak's multiple comparisons tests at α = 0.05.

RESULTS

After erosion/abrasion, the mean (SD) step-heights on occlusal and buccal surfaces were not significantly different until 60 mins, when occlusal surfaces exhibited greater step-heights, 32.9 µm (2.8) and 31.1 µm (1.8) and p = 0.02, respectively. Buccal and occlusal microhardness was statistically lower following erosion/abrasion at loads of 0.01 kgf (p = 0.0005) and 0.02 kgf (p = 0.0006) but no significant differences were observed in the microhardness between the surfaces at any loads.

CONCLUSION

The occlusal and buccal surfaces were not statistically different for microhardness or step height suggesting the susceptibility to wear is not related to the anatomy and structure of the tooth and is more likely related to other factors such as the environment.

CLINICAL SIGNIFICANCE

The study emphasizes that a notable difference in wear between occlusal and buccal enamel surfaces emerges only after prolonged exposure to simultaneous chemical and mechanical stress. This finding necessitates a preventive dental approach that accounts for both the duration of exposure and environmental factors.

Introspection of the Etiopathological Mechanisms Underlying Noncarious Cervical Lesions: Analysis of the Different Theories and Their Impact on the Mineralized Structures of the Tooth

The noncarious cervical lesions (NCCLs) recognize an etiological framework of onset very different from the carious processes with etiology whose bacteria aggregated in a biofilm play a predominant role, leading in this way to the loss of the mineralized structure of the tooth. The pathological picture of the NCCLs, which manifests itself with a clinical picture of dental wear, differs from caries because it mainly recognizes a series of pathological processes, such as erosion, through the action of generally acidic chemical agents and abrasion, which is basically expressed through repeated mechanical trauma characteristic of tooth brushing. However, in the literature, there is no unanimous agreement in identifying only these two mechanisms, but there are some who propose a more marked role of anomalous occlusal loads, which would be unloaded on some teeth which, in addition to both erosive and abrasive mechanisms, would give rise to abfraction. Therefore, the aim of this review was to collect literature etio-pathological information and discuss the mechanisms underlying NCCLs.

Effect of brushing force on the abrasive dentin wear using slurries with different abrasivity values

OBJECTIVE

The aim of this study was to investigate the resulting abrasive dentin wear using abrasive slurries with different RDA values and applying increasing brushing forces.

METHODS

Forty-five bovine incisors were randomly allocated in three groups (A, B, C, n = 15). One hundred and eighty dentin samples were prepared from these incisors and allocated to twelve groups (A1-A4, B1-B4, C1-C4; n = 15). The groups were subjected to a brushing cycle (120 strokes/min, 25 min) as follows: groups A1 to A4 with an abrasive slurry (RDA = 71) applying increasing brushing forces (1, 2, 3 and 4 N). Groups B1 to B4 were brushed using an abrasive slurry (RDA = 85) and C1 to C4 (RDA = 133) applying the same above-mentioned brushing forces. Abrasive dentin wear was recorded using a stylus profilometer and compared amongst the groups using robust models. Pairwise comparisons in each model were tested and corrected after Tukey's method (α = 0.05).

RESULTS

Applying 1-N brushing force resulted in the same amount of abrasive dentin wear in all groups regardless of the abrasivity of the used slurry. Increasing the brushing force to 2 N resulted in statistically significantly higher abrasive wear in all groups. This increase in abrasive wear was much higher when the slurry with high abrasivity was used (RDA = 133) compared with the lower abrasive slurry (RDA = 71).

CONCLUSION

The abrasivity of the used slurry does not add to the resulting abrasive wear when the brushing force is kept at 1 N. It seems better to advise and help the patients (showing signs of non-carious cervical lesions) calibrating their brushing force to 1 N, than only to advise them to use toothpastes with lower abrasivities.

Soft drinks and dental erosion during pediatric age: a clinical investigation

BACKGROUND

Dental erosion is an irreversible condition of loss of teeth hard tissues caused by intrinsic or extrinsic acids attack, without bacterial involvement. Common soft drinks have an acid pH and they release hydrogen ions and act as chelating agents, dissolving teeth mineral component. The aim of the study was to investigate the correlation between the consumption of soft drinks in children and the degree of dental erosion.

METHODS

A questionnaire of 15 multiple choice questions was addressed to the parents of the 231 children needing different dental treatments. Responses were compared with the level of dental erosion of their child, that was clinically investigated using the Basic Erosive Wear Examination (BEWE) index.

RESULTS

About 26.8% of subjects fall into a high-risk category of dental erosion while 24.2% in a low risk level. Socioeconomic status and oral hygiene habits are able to affect the degree of dental erosion. Toothpastes containing fluoride have not proved effective in preventing this phenomenon and no significant correlations were found between the type of toothbrush used and its frequency of use.

CONCLUSIONS

It is necessary to apply preventive measures such as information on the processes and causes of erosion, instruction about right home oral hygiene maneuvers and the possible use of specific products, to avoid the development of problems related to severe dental wear.

Association between cervical abrasion, oral hygiene practices and buccolingual dimension of tooth surfaces: A cross-sectional study

Background:

Cervical abrasion is a multifactorial process due to the use of abrasive dentifrices along with improper brushing patterns. An extensive lesion may cause loss of structural integrity of tooth and esthetically unacceptable. The purpose of the study was to assess the prevalence of cervical abrasion with age, gender, and oral hygiene practices among workers in a spinning mill, Kerala. The study also aimed to identify the buccolingual measurements of each abraded tooth using the Community Abrasion Index of Treatment Needs (CAITN) probe.

Materials and Methods:

A cross-sectional study where 366 subjects (257 males and 109 females) above 20 years of age were selected using a random sampling technique. Data was collected from the assessment form comprising demographic data and oral hygiene practices of the subjects. Clinical examination for abrasion and buccolingual measurements of abraded tooth recorded using CAITN probe. The statistical analysis was done using SPSS 26.0. for calculating descriptive statistics, Chi-square test, and binary logistic regression.

Results:

The overall prevalence of abrasion was 37.2% and 97.7% of subjects with abrasion had sensitive teeth and were statistically significant. Age, gender (males) and combined horizontal and vertical method of brushing technique were strongly associated with the cervical lesion (P < 0.001). Binary logistic regression analysis showed that age group, gender, combined horizontal and vertical method of brushing, and presence of sensitive tooth was associated with the abrasion.

Conclusion:

It is concluded that the severity of the abrasion is an age-related phenomenon associated with combined horizontal and vertical strokes of brushing and is common among the male population. Dentinal hypersensitivity is also more prevalent with cervical abrasion. The novel CAITN probe can be used as an effective tool to assess the cervical abrasion and its treatment needs.

Aesthetic Management of Erosive Tooth Wear in a Young Egyptian Swimmer: A Case Report

Background

Tooth wear can have a multifactorial aetiology which requires thorough patient assessment and aesthetic management.

Purpose

This case report discusses the management of a young, Egyptian swimmer complaining of tooth sensitivity associated with erosive tooth wear. Anterior teeth were restored using the injection molding technique, also known as the injectable composite resin technique, to overcome the patient’s complaint and enhance the aesthetics of compromised anterior teeth.

Patients and Methods

Thorough patient assessment was followed by impression taking, a diagnostic wax-up and intraoral mock-up fabrication for aesthetic, functional and biological verification. Upon the patient’s agreement on the proposed treatment, an injection molding technique was carried out.

Conclusion

The tooth loss pattern associated with erosive tooth wear in competitive swimmers showed a very characteristic presentation. Detailed patient history is imperative for successful assessment of the risk factors contributing to the condition and treatment planning in such cases. The use of injection molding technique for restoration of anterior teeth is a simple, straightforward and aesthetically pleasing alternative for patients with erosive tooth wear requiring direct composite veneers.

Influence of Er,Cr:YSGG laser on root dentin submitted to erosive and/or abrasive challenges

This study evaluated how Er,Cr:YSGG laser, associated or not with 5% fluoride varnish, influences the surface roughness and volume loss of bovine root dentin submitted to erosive and/or abrasive wear. One hundred and twenty dentin specimens were divided into the groups: without preventive treatment (WPT), 5% fluoride varnish (FV); Er,Cr:YSGG laser irradiation (L), and varnish combined with laser (FV + L). The specimens (n = 10) were subdivided into: 1 = erosion (E); 2 = abrasion (A); and 3 = erosion followed by abrasion (E + A). The erosive solution used was a soft-drink (pH = 2.42 at 4ºC) applied in 5-min cycles twice a day for 10d. Abrasive wear involved brushing for 60s with an electric brush (1,600-oscillations/s) at a load of 2.0N. Surface roughness and volume loss were evaluated using a laser scanning confocal microscope. Roughness data were submitted to one-way ANOVA and Tukey post-hoc test. For volume loss, the Kruskal-Wallis and Dunn's post-hoc tests were used (α = 5%). The lowest values of roughness were found in the control areas of all subgroups (p > 0.05). In the experimental area, the [(WPT) + (E+A)] subgroup had a significantly higher roughness (5.712 ± 0.163 μm 2 ) than the other subgroups (p < 0.05). The L and (FV + L) groups had statistically similar roughness, regardless of the type of wear. The (FV + L) group had the lowest volume loss, regardless of the type of wear performed: [(FV + L) + (E)] = 7.5%, [(FV + L) + (A) = 7.3%, and [(FV + L) + (E + A)] = 8.1%. The subgroup [(WPT) + (E + A)] had the highest volume loss (52.3%). The proposed treatments were effective in controlling dentin roughness. Laser irradiation can be an effective method to increase root dentin resistance after challenges and limit problems related to non-carious lesions.

Interplay between different manual toothbrushes and brushing loads on erosive tooth wear

OBJECTIVE

To investigate the effect of different types of manual toothbrushes and brushing loads on the progression of erosive tooth wear (ETW) on enamel.

METHODS

Bovine enamel specimens (n = 10) were submitted to a 5-day erosive-abrasive cycling model (0.3 % citric acid for 5 min, artificial saliva for 60 min, 4x/day). Toothbrushing was carried out 2x/day for 15 s, according to the toothbrushes tested (ultra-soft (a): Curaprox 5460; ultra-soft (b): Sensodyne Repair & Protect; soft (a): Colgate Slim Soft; soft (b): Oral-B Indicator Plus; medium: Johnson's Professional; hard: Tek) and brushing loads (1.5 N, 3 N). Surface loss (SL, in μm) was assessed by optical profilometry on conclusion of the cycling. Some of the toothbrush characteristics were evaluated. Data were statistically analyzed (α = 0.05).

RESULTS

For the 1.5 N load, the hard brush showed the highest SL value, with statistical significance. The other toothbrushes did not differ significantly, except that ultra-soft (a) caused significantly higher SL than ultra-soft (b). For the 3 N load, hard and soft (a) exhibited the highest SL. Soft (b) and medium had the lowest SL value, with statistical significance. Only soft (a) and ultra-soft (b) showed significant difference between loads, with lower SL for the load of 1.5 N. None of the toothbrush characteristics were significantly correlated with SL.

CONCLUSIONS

Although different degrees of enamel surface loss were observed with use of the different toothbrushes, no association was found between the toothbrush characteristics and SL. Depending on the toothbrush, the force of brushing was capable of modulating the ETW of enamel. Based on the brushing loads usually applied by healthy individuals, hard brushes are not recommended for use by patients with ETW.

CLINICAL SIGNIFICANCE

The use of hard bristle brushes is not recommended for use by individuals who exert healthy forces when brushing their teeth. The toothbrush characteristics are of secondary importance in terms of causing enamel loss in ETW.

Effects of cervical restorations on the periodontal tissues: 5-year follow-up results of a randomized clinical trial

OBJECTIVE

This study evaluated the effect of resin composite restorations of non-carious cervical lesions (NCCLs) on the occurrence/progression of gingival recession (GR), considering different tooth isolation techniques.

METHODS

A randomized controlled split-mouth and blinded trial was carried out. Patients (n = 38) with at least two NCCLs were included. Before the cervical restoration placement, the NCCLs (181 teeth) were randomly allocated into two treatment groups according to the tooth isolation techniques: cotton roll or rubber dam. Experienced, trained, blinded, and calibrated examiners performed periodontal evaluations at baseline and 5-year follow-up, using a periodontal probe. Restorations were assessed with the FDI criteria. Thirty-two patients (154 teeth) were evaluated at 5 years. The occurrence/progression of GR between baseline and follow-up was considered the primary outcome. The relative risk (RR) and 95 % confidence interval (95 %CI) were calculated by Poisson regression (α < 0.05).

RESULTS

After 5 year, 31 teeth (13.6 %) presented occurrence/progression of GR. In the multivariate analyses, the occurrence/progression of GR was associated with the use of rubber dam isolation (RR; 95 %CI: 2.65; 1.01-7.00) and a lack of marginal adaptation of the restoration (RR; 95 %CI: 10.98; 2.31-52.30). Toothbrush stiffness, use of abrasive dentifrice, tooth type, and the presence of biofilm or gingivitis did not present a statistically significant higher risk for occurrence/progression of GR.

CONCLUSION

The use of rubber dam isolation associated with retraction clamp and the lack of a proper marginal adaptation of the composite restorations are risk indicators for the occurrence/progression of GR in individuals who received a restoration for an NCCL.

CLINICAL SIGNIFICANCE

Isolation with a rubber dam and dental clamps may promote GR in sites with restored NCCLs. Moreover, clinical examinations for lack of marginal adaptations of the restorations may be included in a clinical setting.

The Prevalence of Tooth Wear in an Adult Population from the Eastern Province of Saudi Arabia

Aim

To assess the prevalence of tooth wear in the Eastern Province of Saudi Arabia in an adult population and to identify potential contributing factors, such as sociodemographic factors.

Methods

This cross-sectional study included adults between 18 and 40 years, seeking routine dental care. A clinical examination using the tooth wear index (TWI) was performed. Each tooth was given a TWI score, followed by classifying participants according to different risk levels. This was followed by a self-administered questionnaire on demographic information and oral hygiene habits. Statistical analyses included univariate, bivariate, as well as multivariate to assess the risk of tooth wear in relation to possible risk factors. The tests used were odds ratios (ORs) with 95% confidence intervals (CIs) and p-values < 0.05 to be statistically significant.

Results

The prevalence of tooth wear and dentin exposure was 83.5% and 58.8%, respectively, with the mean affected teeth of 1.3 ± 0.6 and 0.2 ± 0.2. Both gender and education level were significantly associated with tooth wear at bivariate and multivariate levels (p < 0.05).

Conclusion

The prevalence of tooth wear among sampled adults in this study was high. There was a clear difference in rates of tooth wear for gender and education level. Early identification and prevention of tooth wear will help reduce signs and symptoms in later stages of life.

Baking soda as an abrasive in toothpastes: Mechanism of action and safety and effectiveness considerations

BACKGROUND

Toothpastes can be formulated with different abrasive systems, depending on their intended clinical application. This formulation potentially affects their effectiveness and safety and, therefore, requires proper understanding. In this article, the authors focused on abrasive aspects of toothpastes containing sodium bicarbonate (baking soda), which have gained considerable attention because of their low abrasivity and good compatibility, while providing clinical effectiveness (further detailed in the other articles of this special issue). The authors first appraised the role of toothpaste abrasivity on tooth wear, exploring some underlying processes and the existing methods to determine toothpaste abrasivity.

TYPES OF STUDIES REVIEWED

The authors reviewed the available data on the abrasivity of toothpastes containing baking soda and reported a summary of findings highlighting the clinical implications.

CONCLUSIONS

On the basis of the collected evidence, baking soda has an intrinsic low-abrasive nature because of its comparatively lower hardness in relation to enamel and dentin. Baking soda toothpastes also may contain other ingredients, which can increase their stain removal effectiveness and, consequently, abrasivity.

PRACTICAL IMPLICATIONS

Even those formulations have abrasivity well within the safety limit regulatory agencies have established and, therefore, can be considered safe.

Association of Non-Carious Cervical Lesions with Oral Hygiene Habits and Dynamic Occlusal Parameters

Dentists routinely encounter non-carious cervical lesions (NCCLs) in daily clinical practices. The dental literature is contradictory regarding the occlusal etiology of NCCLs. NCCL is defined as the loss of dental structure at the cemento-enamel junction, with no association of bacteria. The aim of this study was to evaluate the association of dynamic occlusal factors and dental hygiene practices with NCCLs. In total, 100 participants were selected by the random stratified sampling method, 50 each for control and NCCL groups. Information regarding oral hygiene practices, including frequency, duration, force, and technique of brushing, was recorded. Dynamic occlusal parameters like initial contact, occlusion time (OT), disocclusion time (DT), and center of force were recorded with T-scan analysis. The obtained data were analyzed with Pearson's correlation and binary logistic regression. We found that 68% of participants in the NCCL group and 31% in the control group utilized the horizontal brushing technique; 46% of NCCL group participants used hard brush against 7% of participants in the control group. The mean OT was 0.727 and 0.516 s for NCCL and control groups, respectively. The OT and left and right lateral DT were strongly related to NCCL, with r-values of 0.661, 0.642, and 0.534, respectively, with p ≤ 0.001. Using a hard toothbrush was found to be associated with NCCL. The NCCL group had extended mean occlusion time and disocclusion time in all eccentric mandibular movements.

Characteristics of chitosan-modified glass ionomer cement and their effects on the adhesion and proliferation of human gingival fibroblasts: an in vitro study

This study explores the possibility of adhering gingival tissue to a root surface that was restored with chitosan (CS)-modified glass ionomer cement (GIC) in the case of gingival recessions associated with root caries, which provides a theoretical basis for clinical application at the cellular level. The specimens were mixed after integrating 1, 2, and 4 wt% CS into the GIC fluid. The characteristics and cytocompatibility were then examined. As more CS was incorporated into the GIC fluid, the mechanical properties and cytocompatibility of chitosan-modified glass ionomer cement (CS-GIC) first improved but then reduced. Under scanning electron microscopy, microcracks were observed on the surface of all materials, but the fewest microcracks were observed on the surface of 2 wt% CS-GIC. The compressive strength of 2 wt% CS-GIC was significantly higher than that of the other groups at 5 days (P < 0.05) and the addition of chitosan didn't change the basic fracture mode of materials. Additionally, the integration 2 wt% CS into GIC can obviously reduce acidity of the original GIC (P < 0.01) when using extracts with concentrations of 100 and 50%. The Cell Counting Kit-8 assay and adhesion and proliferation of human gingival fibroblasts (HGFs) on the surface of the materials indicated that 2 wt% CS-GIC presented better cytocompatibility and was more suitable for the growth of HGFs. In summary, 2 wt% CS-GIC could be considered as a potential root filling material to allow the adhesion and growth of gingival tissue.

Prevalence of non-carious cervical lesions among the general population of the Republic of Srpska, Bosnia and Herzegovina

INTRODUCTION

As non-carious cervical lesions (NCCLs) may compromise aesthetics and function, knowledge of their aetiological covariables enhances management of clinical complaints and success of restorative treatments.

AIMS

The primary aim of this study was to assess the presence of NCCLs among the general population of the Republic of Srpska, Bosnia and Herzegovina and the potential association with patient-related risk factors.

METHODS

A prevalence study of NCCLs included 738 respondents from eight towns/municipalities. Two dental practitioners examined all respondents. NCCLs were diagnosed according to the Smith and Knight tooth wear index, measured using a Williams periodontal probe. Data regarding risk factors were obtained through a structured questionnaire. Multivariate logistic regression was used to analyse the association of risk factors and the occurrence of NCCLs.

RESULTS

Non-carious cervical lesions were diagnosed in 384 (52%) respondents. Multivariate regression analysis showed that several variables were independently associated with the risk of developing NCCLs, including frequent consumption of acid food (P = 0.001), frequent consumption of acid drinks (P = 0.001), retaining drink in the mouth (P = 0.001), alcohol consumption (P = 0.030), bruxism (P = 0.018) and gastro-oesophageal reflux (P = 0.023). First mandibular premolars were the most affected teeth (left: 46.0%; right: 44.0%), followed by the second right maxillary premolars (37.3%), second left maxillary premolars (33.6%) and finally by the first right maxillary premolars (34.0%).

CONCLUSION

The results of the current study suggest that NCCLs occur frequently and have a multifactorial aetiology. The lowest prevalence was recorded among individuals younger than 20 years of age. As the majority of risk factors are modifiable, regular dental care could lead to the early detection of NCCLs.

Non-carious cervical lesions and risk factors: A case-control study

OBJECTIVES

To evaluate whether the presence of non-carious cervical lesions (NCCLs) was related to the considered risk factors and to show the corresponding odds ratio in a predictive model.

METHODS

The sample was 280 dentistry students. In an initial clinical examination, 140 cases were selected that presented one or more teeth with non-carious cervical wear. For each case, a similar sex and age control without any tooth with non-carious cervical lesions was selected. An occlusal examination and periodontal probing were performed in all cases and controls by skilled dentists. All the subjects answered a questionnaire referring to factors of brushing, bruxism, preferred chewing side, consumption of extrinsic acids and the presence of intrinsic acids. Data were analysed by means of univariate and multivariate logistic regression.

RESULTS

Of all the study variables, only the protrusion interferences, interferences on the non-working side, the brushing force, CPITN value and the consumption of salads increase the risk of NCCLs in the univariate regression. The best predictive model was formed by the combination of CPITN variables >1, the consumption of acidic salads, self-reported bruxism, brushing force and attrition. However, it only correctly classifies 68.75% of subjects.

CONCLUSIONS

This study supports the multifactorial aetiology of NCCLs, the combination of several factors being necessary to explain their presence. The risk factors that make up the predictive model are not sufficient to explain the appearance of NCCLs. Dentists should take into account all these risk factors in prevention, diagnosis and treatment.

Factors influencing the progression of noncarious cervical lesions: A 5-year prospective clinical evaluation

STATEMENT OF PROBLEM

The etiology (chemical, friction, abfraction) of noncarious cervical lesion (NCCL) progression is poorly understood.

PURPOSE

The purpose of this 5-year prospective clinical trial was to measure the relationship between NCCLs and various etiologic factors.

MATERIAL AND METHODS

After review board approval, 29 participants with NCCLs were enrolled. Polyvinyl siloxane impressions were made of each NCCL, and casts were poured at baseline, 1, 2, and 5 years. The casts were scanned with a noncontact profilometer, and 1-, 2-, and 5-year scans were superimposed over baseline scans to measure volumetric change in NCCLs. T-scan and Fujifilm Prescale films were used to record relative and absolute occlusal forces on teeth with NCCLs at the 5-year recall. Participant diet, medical condition, toothbrushing, and adverse oral habit questionnaires were given at the 5-year recall. Occlusal analysis was completed on mounted casts to determine the presence of wear facets and group function. Volumetric lesion progression from 1 to 5 years was correlated to absolute and relative occlusal force using mixed model analysis. The Kruskall-Wallis and Mann-Whitney analyses compared lesion progression with diet, medical condition, toothbrushing, adverse oral habits, wear facets, and group function.

RESULTS

The NCCL progression rate over 5 years was 1.50 ±0.92 mm(3)/yr. The rate of progression of NCCLs was related to mean occlusal stress (P=.011) and relative occlusal force (P=.032) in maximum intercuspation position. No difference was seen in NCCL progression between participants with any other factors.

CONCLUSION

Heavy occlusal forces play a significant role in the progression of NCCLs.

Clinical assessment of non carious cervical lesion using swept-source optical coherence tomography

Non-carious cervical lesions (NCCLs) involve various forms of tooth loss with different etiologies. This study aimed to utilize swept-source optical coherence tomography (SS-OCT) at 1300 nm wavelength range in vitro and in vivo to evaluate and clarify the mechanism of NCCLs. In the in vitro phase, a dentin attenuation coefficient (μt ) derived from the SS-OCT signal at NCCL was compared with mineral loss obtained from transverse microradiography (TMR) to determine a μt threshold to discriminate demineralization of cervical dentin in vivo. In the clinical study, 242 buccal surfaces were investigated in 35 subjects. Presence and dimensions of NCCLs, cervical cracking and the degree of demineralization at the exposed cervical dentin were determined using SS-OCT. Dentin demineralization was observed in 69% of NCCLs. SS-OCT results confirm that dentin mineral loss and occlusal attrition were associated with larger NCCLs, and can be considered as an etiological factor in formation and progress of these lesions. (A) We determined the attenuation coeffcient (μt ) threshold of SS-OCT signal for the detection of demineralization (1.21) from in vitro study. DEM: demineralized dentin, sound: sound dentin. (B) Using the μt threshold, we observed NCCLs in vivo to detect the demineralization in cervical dentin. SS-OCT scanning was performed along the red line. (C) SS-OCT image obtained along the red line in B. In SS-OCT, brightness of dentin beneath the NCCL was increased (arrow) compared with intact zone. The cervical dentin was slightly demineralized (μt : 1.25). e: enamel, d: dentin, g: gingiva.

Brushing force of manual and sonic toothbrushes affects dental hard tissue abrasion

OBJECTIVES

This study aimed to determine the brushing forces applied during in vivo toothbrushing with manual and sonic toothbrushes and to analyse the effect of these brushing forces on abrasion of sound and eroded enamel and dentin in vitro.

MATERIALS AND METHODS

Brushing forces of a manual and two sonic toothbrushes (low and high frequency mode) were measured in 27 adults before and after instruction of the respective brushing technique and statistically analysed by repeated measures analysis of variance (ANOVA). In the in vitro experiment, sound and eroded enamel and dentin specimens (each subgroup n = 12) were brushed in an automatic brushing machine with the respective brushing forces using a fluoridated toothpaste slurry. Abrasion was determined by profilometry and statistically analysed by one-way ANOVA.

RESULTS

Average brushing force of the manual toothbrush (1.6 ± 0.3 N) was significantly higher than for the sonic toothbrushes (0.9 ± 0.2 N), which were not significantly different from each other. Brushing force prior and after instruction of the brushing technique was not significantly different. The manual toothbrush caused highest abrasion of sound and eroded dentin, but lowest on sound enamel. No significant differences were detected on eroded enamel.

CONCLUSION

Brushing forces of manual and sonic toothbrushes are different and affect their abrasive capacity.

CLINICAL SIGNIFICANCE

Patients with severe tooth wear and exposed and/or eroded dentin surfaces should use sonic toothbrushes to reduce abrasion, while patients without tooth wear or with erosive lesions confining only to enamel do not benefit from sonic toothbrushes with regard to abrasion.

Non-carious cervical lesions and occlusion: a systematic review of clinical studies

Non-carious cervical lesions (NCCLs) are a group of lesions that affect the cervical area of the teeth. Different aetiological factors have been reported, among them tooth brushing force, erosive agents and occlusal forces. The aim of this study was to ascertain, by means of a systematic review, the association between NCCLs and occlusion. A search was performed in the MEDLINE database, retrieving a total of 286 articles. After title and abstract screening, the clinical investigations were read in full to select those that evaluated the occlusal aspects of NCCL aetiology. This systematic review describes the results of three prospective and 25 cross-sectional studies. As there is an extreme heterogeneity in design, diagnostic criteria, forms of analysis and associated factors, a meta-analysis was not possible. The wide variety of classification and diagnostic criteria reflects a high range of reported prevalence. An extensive heterogeneity of independent variables was noted, even in occlusal analysis, which helps to mask any conclusion about the role of occlusion in NCCL aetiology. The literature reveals that studies on this topic are subject to a substantial amount of bias, such as evaluation (use of non-blinded examiners) and confounding bias (no control of others aetiological factors). Up to now, it has been impossible to associate NCCLs with any specific causal agent, and the role of occlusion in the pathogenesis of non-carious cervical lesions seems as yet undetermined. Therefore, additional studies, properly designed to diminish bias, are warranted.