Primary genome scan to identify putative quantitative trait loci for feedlot growth rate, feed intake, and feed efficiency of beef cattle

Factors affecting the rumen fluid foaming performance in goat fed high concentrate diet

Feeding high concentrate diets is highly prone to rumen bloat in ruminants, which is very common in production. This study explored the factors responsible for the occurrence of foamy rumen bloat. The experiment was conducted using goats as test animals, fed high concentrate diets and scored for rumen distension into high, medium and low bloat score groups. Rumen fluid was collected from 6 goats in each group separately. The foaming production, foam persistence, pH value, viscosity and the content of protein, total saccharide and mineral elements in rumen original fluid (ROL) were measured, and the protein and total saccharide content in rumen foam liquid (RFL) and rumen residual liquid (RRL) were determined. The results showed that the protein content in rumen original fluid and rumen foam liquid was significantly higher than that in rumen residual liquid (p < 0.05), and the protein content in rumen foam liquid was 10.81% higher than that in rumen original fluid. The higher the rumen bloat score, the higher the foam production, foam persistence, viscosity, protein, Ni, Mg, Ca, and K concentrations of the rumen original fluid, and the lower the PH and Na concentrations of the rumen original fluid; correlation analysis showed that the viscosity of the rumen original fluid was significantly and positively correlated with the foam production and foam persistence (p < 0.05). Foaming production and foam persistence of rumen original fluid were significantly and positively correlated with the contents of protein, total saccharide, K, Ca, Mg and Ni (p < 0.05). and negatively correlated with the content of Na (p < 0.05); after controlling other components those were significantly related to the foaming performance of rumen original fluid only protein still was significantly positively correlated with the foam persistence of rumen original fluid (P<0.05). In summary, the contents of protein, total saccharide and mineral elements in the rumen fluid had a significant effect on the foaming performance of rumen in ruminants, with protein playing a decisive role and the other components playing a supporting role. Reducing the content of protein in the diet in production is beneficial to reduce the occurrence of rumen bloat in ruminants.

Heritability estimates and genome-wide association study of methane emission traits in Nellore cattle

The objectives of the present study were to estimate the heritability for daily methane emission (CH4) and residual daily methane emission (CH4res) in Nellore cattle, as well as to perform genome-wide association studies (GWAS) to identify genomic regions and candidate genes influencing the genetic variation of CH4 and CH4res. Methane emission phenotypes of 743 Nellore animals belonging to 3 breeding programs were evaluated. CH4 was measured using the sulfur hexafluoride (SF6) tracer technique (which involves an SF6 permeation tube introduced into the rumen, and an appropriate apparatus on each animal), and CH4res was obtained as the difference between observed CH4 and CH4 adjusted for dry matter intake. A total of 6,252 genotyped individuals were used for genomic analyses. Data were analyzed with a univariate animal model by the single-step GBLUP method using the average information restricted maximum likelihood (AIREML) algorithm. The effects of single nucleotide polymorphisms (SNPs) were obtained using a single-step GWAS approach. Candidate genes were identified based on genomic windows associated with quantitative trait loci (QTLs) related to the 2 traits. Annotation of QTLs and identification of candidate genes were based on the initial and final coordinates of each genomic window considering the bovine genome ARS-UCD1.2 assembly. Heritability estimates were of moderate to high magnitude, being 0.42 ± 0.09 for CH4 and 0.21 ± 0.09 for CH4res, indicating that these traits will respond rapidly to genetic selection. GWAS revealed 11 and 15 SNPs that were significantly associated (P < 10-6) with genetic variation of CH4 and CH4res, respectively. QTLs associated with feed efficiency, residual feed intake, body weight, and height overlapped with significant markers for the traits evaluated. Ten candidate genes were present in the regions of significant SNPs; 3 were associated with CH4 and 7 with CH4res. The identified genes are related to different functions such as modulation of the rumen microbiota, fatty acid production, and lipid metabolism. CH4 and CH4res presented sufficient genetic variation and may respond rapidly to selection. Therefore, these traits can be included in animal breeding programs aimed at reducing enteric methane emissions across generations.

Exploring the Impact of Ampelopsis Grossedentata Flavonoids on Growth Performance, Ruminal Microbiota, and Plasma Physiology and Biochemistry of Kids

This study was conducted to evaluate the influences of supplementing Ampelopsis grossedentata flavonoids (AGF) on the rumen bacterial microbiome, plasma physiology and biochemistry, and growth performance of goats. Twenty-four Nubian kids were randomly allocated to three dietary treatments: the control (CON, basal diet), the 1.0 g/kg AGF treatment (AGF), and the 12.5 mg/kg monensin treatment (MN). This trial consisted of 10 days for adaptation and 90 days for data and sample collection. The results reveal that Bacteroidetes, Firmicutes, and Proteobacteria are the dominant phyla in kids' rumen. Compared with the CON group, the alpha diversity in the MN and AGF groups significantly increased (p < 0.01). Beta-diversity shows that rumen microbial composition is more similar in the MN and AGF groups. LEfSe analysis shows that Prevotella_1 in the AGF group were significantly higher than those in the MN and CON group. The high-density lipoprotein cholesterol and glucose levels in the AGF group were significantly higher than those in the CON group (p < 0.05), whereas the low-density lipoprotein cholesterol, glutamic-pyruvic transaminase, and alkaline phosphatase levels exhibited the opposite trend. The average daily gains in the AGF and MN groups significantly increased, while the feed-to-gain ratios were significantly decreased (p < 0.05). The results suggest that adding AGF to the diet improves microbial composition and has important implications for studying juvenile livestock growth and improving economic benefits.

Genome-Wide Associative Study of Phenotypic Parameters of the 3D Body Model of Aberdeen Angus Cattle with Multiple Depth Cameras

Simple Summary

This article aims to develop a new approach to the lifetime evaluation of cattle by 3-D visualization of economic-biological and genetic features. The following indicators were selected as phenotypic features: chest width and chest girth retrieved by 3-D model and meat output on the bones. Correlation analysis showed a reliable positive relationship between chest width and meat output on the bones, which can potentially be used for lifetime evaluation of meat productivity of animals. Genome-wide associations analysis revealed the following potential loci of quantitative traits on cattle chromosomes for chest width, chest girth, and meat output on bones.

Abstract

In beef cattle breeding, genome-wide association studies (GWAS) using single nucleotide polymorphisms (SNPs) arrays can reveal many loci of various production traits, such as growth, productivity, and meat quality. With the development of genome sequencing technologies, new opportunities are opening up for more accurate identification of areas associated with these traits. This article aims to develop a novel approach to the lifetime evaluation of cattle by 3-D visualization of economic-biological and genetic features. The purpose of this study was to identify significant variants underlying differences in the qualitative characteristics of meat, using imputed data on the sequence of the entire genome. Samples of biomaterial of young Aberdeen-Angus breed cattle (n = 96) were the material for carrying out genome-wide SNP genotyping. Genotyping was performed using a high-density DNA chip Bovine GPU HD BeadChip (Illumina Inc., San Diego, CA, USA), containing ~150 thousand SNPs. The following indicators were selected as phenotypic features: chest width and chest girth retrieved by 3-D model and meat output on the bones. Correlation analysis showed a reliable positive relationship between chest width and meat output on the bones, which can potentially be used for lifetime evaluation of meat productivity of animals.

Integrative analyses of genomic and metabolomic data reveal genetic mechanisms associated with carcass merit traits in beef cattle

Improvement of carcass merit traits is a priority for the beef industry. Discovering DNA variants and genes associated with variation in these traits and understanding biological functions/processes underlying their associations are of paramount importance for more effective genetic improvement of carcass merit traits in beef cattle. This study integrates 10,488,742 imputed whole genome DNA variants, 31 plasma metabolites, and animal phenotypes to identify genes and biological functions/processes that are associated with carcass merit traits including hot carcass weight (HCW), rib eye area (REA), average backfat thickness (AFAT), lean meat yield (LMY), and carcass marbling score (CMAR) in a population of 493 crossbred beef cattle. Regression analyses were performed to identify plasma metabolites associated with the carcass merit traits, and the results showed that 4 (3-hydroxybutyric acid, acetic acid, citric acid, and choline), 6 (creatinine, L-glutamine, succinic acid, pyruvic acid, L-lactic acid, and 3-hydroxybutyric acid), 4 (fumaric acid, methanol, D-glucose, and glycerol), 2 (L-lactic acid and creatinine), and 5 (succinic acid, fumaric acid, lysine, glycine, and choline) plasma metabolites were significantly associated with HCW, REA, AFAT, LMY, and CMAR (P-value < 0.1), respectively. Combining the results of metabolome-genome wide association studies using the 10,488,742 imputed SNPs, 103, 160, 83, 43, and 109 candidate genes were identified as significantly associated with HCW, REA, AFAT, LMY, and CMAR (P-value < 1 × 10^-5), respectively. By applying functional enrichment analyses for candidate genes of each trait, 26, 24, 26, 24, and 28 significant cellular and molecular functions were predicted for HCW, REA, AFAT, LMY, and CMAR, respectively. Among the five topmost significantly enriched biological functions for carcass merit traits, molecular transport and small molecule biochemistry were two top biological functions associated with all carcass merit traits. Lipid metabolism was the most significant biological function for LMY and CMAR and it was also the second and fourth highest biological function for REA and HCW, respectively. Candidate genes and enriched biological functions identified by the integrative analyses of metabolites with phenotypic traits and DNA variants could help interpret the results of previous genome-wide association studies for carcass merit traits. Our integrative study also revealed additional potential novel genes associated with these economically important traits. Therefore, our study improves understanding of the molecular and biological functions/processes that influence carcass merit traits, which could help develop strategies to enhance genomic prediction of carcass merit traits with incorporation of metabolomic data. Similarly, this information could guide management practices, such as nutritional interventions, with the purpose of boosting specific carcass merit traits.

Comparative analysis of inbreeding parameters and runs of homozygosity islands in 2 Italian autochthonous cattle breeds mainly raised in the Parmigiano-Reggiano cheese production region

Reggiana and Modenese are autochthonous cattle breeds, reared in the North of Italy, that can be mainly distinguished for their standard coat color (Reggiana is red, whereas Modenese is white with some pale gray shades). Almost all milk produced by these breeds is transformed into 2 mono-breed branded Parmigiano-Reggiano cheeses, from which farmers receive the economic incomes needed for the sustainable conservation of these animal genetic resources. After the setting up of their herd books in 1960s, these breeds experienced a strong reduction in the population size that was subsequently reverted starting in the 1990s (Reggiana) or more recently (Modenese) reaching at present a total of about 2,800 and 500 registered cows, respectively. Due to the small population size of these breeds, inbreeding is a very important cause of concern for their conservation programs. Inbreeding is traditionally estimated using pedigree data, which are summarized in an inbreeding coefficient calculated at the individual level (F_PED). However, incompleteness of pedigree information and registration errors can affect the effectiveness of conservation strategies. High-throughput SNP genotyping platforms allow investigation of inbreeding using genome information that can overcome the limits of pedigree data. Several approaches have been proposed to estimate genomic inbreeding, with the use of runs of homozygosity (ROH) considered to be the more appropriate. In this study, several pedigree and genomic inbreeding parameters, calculated using the whole herd book populations or considering genotyping information (GeneSeek GGP Bovine 150K) from 1,684 Reggiana cattle and 323 Modenese cattle, were compared. Average inbreeding values per year were used to calculate effective population size. Reggiana breed had generally lower genomic inbreeding values than Modenese breed. The low correlation between pedigree-based and genomic-based parameters (ranging from 0.187 to 0.195 and 0.319 to 0.323 in the Reggiana and Modenese breeds, respectively) reflected the common problems of local populations in which pedigree records are not complete. The high proportion of short ROH over the total number of ROH indicates no major recent inbreeding events in both breeds. ROH islands spread over the genome of the 2 breeds (15 in Reggiana and 14 in Modenese) identified several signatures of selection. Some of these included genes affecting milk production traits, stature, body conformation traits (with a main ROH island in both breeds on BTA6 containing the ABCG2, NCAPG, and LCORL genes) and coat color (on BTA13 in Modenese containing the ASIP gene). In conclusion, this work provides an extensive comparative analysis of pedigree and genomic inbreeding parameters and relevant genomic information that will be useful in the conservation strategies of these 2 iconic local cattle breeds.

Exploiting within-breed variability in the autochthonous Reggiana breed identified several candidate genes affecting pigmentation-related traits, stature and udder defects in cattle

Autochthonous cattle breeds constitute important reservoirs of genetic diversity. Reggiana is an Italian local cattle breed reared in the north of Italy for the production of a mono‐breed Parmigiano–Reggiano cheese. Reggiana cattle usually have a classical solid red coat colour and pale muzzle. As part of the strategies designed for the sustainable conservation of this genetic resource, we investigated at the genome‐wise level the within‐breed detected variability of three pigmentation‐related traits (intensity of red coat colour, based on three classes – light/diluted, normal and dark; spotted patterns/piebaldism that sometime emerge in the breed; muzzle colour – pink/pale, grey and black), stature, presence/absence and number of supernumerary teats and teat length. A total of 1776 Reggiana cattle (about two‐thirds of the extant breed population) were genotyped with the GeneSeek GGP Bovine 150k SNP array and single‐marker and haplotype‐based GWASs were carried out. The results indicated that two main groups of genetic factors affect the intensity of red coat colour: darkening genes (including EDN3 and a few other genes) and diluting genes (including PMEL and a few other genes). Muzzle colour was mainly determined by MC1R gene markers. Piebaldism was mainly associated with KIT gene markers. Stature was associated with BTA6 markers upstream of the NCAPG–LCORL genes. Teat defects were associated with TBX3/TBX5, MCC and LGR5 genes. Overall, the identified genomic regions not only can be directly used in selection plans in the Reggiana breed, but also contribute to clarifying the genetic mechanisms involved in determining exterior traits in cattle.

Selection criteria for feed efficiency-related traits and their association with growth, reproductive and carcass traits in Nelore cattle

Context Livestock feed costs have a higher impact on the profitability of beef production systems and are directly related to feed efficiency. However, these traits are hard and have high costs to measure, reducing the availability of phenotypic records and reliability of genetic evaluations. Thus, the use of genomic information can increase the robustness of genetic studies that address them. Aims The aim of the present study was to estimate genetic parameters for feed efficiency, growth, reproductive and carcass traits in Nelore cattle and the correlated response among them, using genomic information. Methods Residual feed intake (RFI), dry-matter intake, feed conversion ratio, feed efficiency (FE), residual average daily gain (RG), residual feed intake and average daily gain (RIG), birthweight, weight at 120, 240, 365 and 450 days of age, scrotal circumference at 365 and 450 days of age, rib-eye area, backfat thickness and rump fat thickness were evaluated. The genetic parameters were estimated using the single-step genomic best linear unbiased prediction approach. Key results The FE-related traits showed low to moderate heritability ranging from 0.07 to 0.23. Feed efficiency-related traits showed low genetic correlations with reproductive (–0.24 to 0.27), carcass (–0.17 to 0.27) and growth (–0.19 to 0.24) traits, except for growth with dry-matter intake (0.32–0.56) and weight at 365 days of age with FE (–0.40). Conclusions The selection to improve growth, reproductive and carcass traits would not change RFI, RG and RIG. The choice of the most adequate selection criterion depends on the production system, that is, RFI might be used for low-input beef cattle systems, and RIG would be used for more intensive and without-any-dietary-restrictions beef cattle systems. Implications The estimates of heritability and genetic correlations suggest that genetic selection for feed efficiency using RFI, RG and RIG in Nellore cattle leads to higher genetic gain than does that using FE and feed conversion ratio without affecting other profitability traits.

A Genome-Wide Association Study on Feed Efficiency Related Traits in Landrace Pigs

Feed efficiency (FE) traits in pigs are of utmost economic importance. Genetic improvement of FE related traits in pigs might significantly reduce production cost and energy consumption. Hence, our study aimed at identifying SNPs and candidate genes associated with FE related traits, including feed conversion ratio (FCR), average daily gain (ADG), average daily feed intake (ADFI), and residual feed intake (RFI). A genome-wide association study (GWAS) was performed for the four FE related traits in 296 Landrace pigs genotyped with PorcineSNP50 BeadChip. Two different single-trait methods, single SNP linear model GWAS (LM-GWAS) and single-step GWAS (ssGWAS), were implemented. Our results showed that the two methods showed high consistency with respect to SNP identification. A total of 32 common significant SNPs associated with the four FE related traits were identified. Bioinformatics analysis revealed eight common QTL regions, of which three QTL regions related to ADFI and RFI traits were overlapped. Gene ontology analysis revealed six common candidate genes (PRELID2, GPER1, PDX1, TEX2, PLCL2, ICAM2) relevant for the four FE related traits. These genes are involved in the processes of fat synthesis and decomposition, lipid transport process, insulin metabolism, among others. Our results provide, new insights into the genetic mechanisms and candidate function genes of FE related traits in pigs. However, further investigations to validate these results are warranted.

Heritability and genetic correlations of feed intake, body weight gain, residual gain, and residual feed intake of beef cattle as heifers and cows

The cow herd consumes approximately 70% of the annual feed resources. To date, most genetic evaluations of feed intake in beef cattle have been made in growing animals and little information is available for mature cows. Genetic evaluations in mature cows have predominately been confined to lactating dairy cows and the relationship between feed intake as growing heifers and mature cows has not been addressed. It was the purpose of this study to estimate the heritability of feed intake when measured as growing heifers and mature cows and determine the genetic correlation between these measurements. Individual feed intake and BW gain were measured on 687 heifers and 622 5-yr-old cows. The heritability of average daily DMI (ADDMI) estimated in heifers was 0.84 ± 0.12 and 0.53 ± 0.12 in cows. The heritability of ADG estimated in heifers was 0.53 ± 0.12 and 0.34 ± 0.11 in cows. The genetic correlation between heifer and cow ADDMI was 0.84 ± 0.09. The genetic correlation between heifer and cow ADG was 0.73 ± 019. Heritability of residual feed intake in heifers was 0.25 ± 0.11 and 0.16 ± 0.10 in cows. Heritability for residual gain in heifers was 0.21 ± 0.11 and 0.14 ± 0.10 in cows. Feed intake and ADG are heritable and genetically correlated between heifers and cows. Selection for decreased feed intake and ADG in growing animals will probably have the same directional effects on mature cows.

Genomic Regions Associated With Skeletal Type Traits in Beef and Dairy Cattle Are Common to Regions Associated With Carcass Traits, Feed Intake and Calving Difficulty

Linear type traits describing the skeletal characteristics of an animal are moderately to strongly genetically correlated with a range of other performance traits in cattle including feed intake, reproduction traits and carcass merit; thus, type traits could also provide useful insights into the morphological differences among animals underpinning phenotypic differences in these complex traits. The objective of the present study was to identify genomic regions associated with five subjectively scored skeletal linear traits, to determine if these associated regions are common in multiple beef and dairy breeds, and also to determine if these regions overlap with those proposed elsewhere to be associated with correlated performance traits. Analyses were carried out using linear mixed models on imputed whole genome sequence data separately in 1,444 Angus, 1,129 Hereford, 6,433 Charolais, 8,745 Limousin, 1,698 Simmental, and 4,494 Holstein-Friesian cattle, all scored for the linear type traits. There was, on average, 18 months difference in age at assessment of the beef versus the dairy animals. While the majority of the identified quantitative trait loci (QTL), and thus genes, were both trait-specific and breed-specific, a large-effect pleiotropic QTL on BTA6 containing the NCAPG and LCORL genes was associated with all skeletal traits in the Limousin population and with wither height in the Angus. Other than that, little overlap existed in detected QTLs for the skeletal type traits in the other breeds. Only two QTLs overlapped the beef and dairy breeds; both QTLs were located on BTA5 and were associated with height in both the Angus and the Holstein-Friesian, despite the difference in age at assessment. Several detected QTLs in the present study overlapped with QTLs documented elsewhere that are associated with carcass traits, feed intake, and calving difficulty. While most breeding programs select for the macro-traits like carcass weight, carcass conformation, and feed intake, the higher degree of granularity with selection on the individual linear type traits in a multi-trait index underpinning the macro-level goal traits, presents an opportunity to help resolve genetic antagonisms among morphological traits in the pursuit of the animal with optimum performance metrics.

Genetic parameters and genome-wide association study regarding feed efficiency and slaughter traits in Charolais cows

Residual energy intake (REI) on two successive diets (hay and maize based) and slaughter traits, including visceral organs, were phenotyped in 584 adult purebred Charolais cows. To investigate the relationships between these traits and their genetic determinism, we first estimated the genetic parameters, including correlations, using REML modeling under WOMBAT software. The animals were then genotyped on the BovineSNP50 SNPchip before being imputed to the 600K density and genome wide association study was performed with GCTA software. We found low heritability for REI (h2 = 0.12 in each of the diet phases). Although the phenotypic correlation between the two diet phases was moderate (0.36), the genetic correlation was high (0.83), indicating a common genetic determinism for feed efficiency regardless of the diet. Correlations between REI and slaughter traits were negative regarding muscle-related traits and positive for fat-related traits, indicating that efficient animals generally had a more muscular carcass. It was also seen that feed efficiency was genetically and phenotypically correlated with smaller organs when expressed as a proportion of their empty body weight. From the GWAS analysis, seven QTLs were found to be associated with a trait at the genome-wide level of significance and 18 others at the chromosome-wide level. One important QTL was detected in BTA 2, reflecting the essential effect of the myostatin gene on both carcass composition and relative organ weight. Three QTLs were detected for REI during the maize diet phase on BTA 13, 19, and 28, the latter being significant at the genome-wide level. The QTLs on BTA 19 mapped into the TANC2 gene and the QTLs on BTA 28 into the KIF1BP gene, which are both known to interact with the same protein (KIF1A). However, no obvious functional link between these genes and feed efficiency could be made. Among the other QTLs detected, one association on BTA 4 with liver proportion mapped to the candidate gene WASL, which has previously been shown to be differentially expressed in liver cells and linked to feed restriction or cancer development. No QTLs were found to be common between feed efficiency and any slaughter traits.

Polymorphisms within the Boule Gene Detected by Tetra-Primer Amplification Refractory Mutation System PCR (T-ARMS-PCR) are Significantly Associated with Goat Litter Size

As a gene contributing to spermatogenesis, the Boule gene (also called Boll), whose mutations result in azoospermia and sterility of flies and mice, was conserved in reductional maturation divisions. However, in goats, the polymorphisms of Boule, especially with regard to their fundamental roles in female reproduction traits, are still unknown. Therefore, the aims of this study were to detect a potential mutation (rs661484476: g.7254T>C) located in intron 2 of the Boule gene by tetra-primer amplification refractory mutation system PCR (T-ARMS-PCR) and to explore its potential association with the litter size of Shaanbei White-Cashmere goats (SBWGs). In this study, g.7254T>C was firstly detected. The TT genotype was the dominant genotype in the single-lamb group, and T was also the dominant allele in all tested groups. Additionally, the detected locus displayed moderate polymorphism with polymorphism information content (PIC) values among all studied goats ranging from 0.303 to 0.344. Notably, according to the χ² test, the distribution differences for the genotypic frequencies between the single- and multi-lamb groups was significant (p = 0.014). Furthermore, the polymorphisms of the goat Boule gene were significantly associated with the goat litter size in SBWGs (p < 0.05), which indicated that g.7254T>C could be a potential marker in the marker-assisted selection process for potential litter size in goats. These results also indicated that the Boule gene might exercise important functions in female goat reproduction, which provided new insight for female goat breeding and could accelerate the process of goat breeding.

FABP4 gene has a very large effect on feed efficiency in lactating Israeli Holstein cows

Improving feed efficiency (FE) is a major goal for the livestock industry. Previously, we have identified 48 SNP markers distributed over 32 genes significantly associated with residual feed intake (RFI) in Israeli Holstein male calves, the most significant of which are located in the bovine FABP4 gene. In the present study, we tested associations of eight of the FABP4 markers with RFI and feed conversion ratio (FCR), along with milk composition and feeding behavioral traits, in 114 lactating Israeli Holstein cows. Large allele effects were found, along with large contributions of FABP4 markers to the phenotypic variation [mean contribution of all significant markers (P < 0.05), 15.4 and 12.0% for RFI and FCR, respectively] and genotypic variation [means of all significant markers (P < 0.05), 75.7 and 32.4% in RFI and FCR, respectively]. However, the association of all significant FABP4 markers with FE and milk content traits was found in opposite directions, such that improved FE was accompanied by decreased milk content. Hence, before inclusion in breeding programs, the gain in FE must be economically balanced with the loss in milk contents. On the other hand, these findings imply that in any current improvement program concentrated on milk traits alone, without taking into account the effect on FE, the progress in milk composition is probably accompanied by deterioration of FE. These results, if confirmed in other populations and breeds, set FABP4 as a prime candidate in any marker-assisted selection program targeting FE as a whole and RFI in particular.

High-density genome-wide association study for residual feed intake in Holstein dairy cattle

Improving feed efficiency (FE) of dairy cattle may boost farm profitability and reduce the environmental footprint of the dairy industry. Residual feed intake (RFI), a candidate FE trait in dairy cattle, can be defined to be genetically uncorrelated with major energy sink traits (e.g., milk production, body weight) by including genomic predicted transmitting ability of such traits in genetic analyses for RFI. We examined the genetic basis of RFI through genome-wide association (GWA) analyses and post-GWA enrichment analyses and identified candidate genes and biological pathways associated with RFI in dairy cattle. Data were collected from 4,823 lactations of 3,947 Holstein cows in 9 research herds in the United States. Of these cows, 3,555 were genotyped and were imputed to a high-density list of 312,614 SNP. We used a single-step GWA method to combine information from genotyped and nongenotyped animals with phenotypes as well as their ancestors' information. The estimated genomic breeding values from a single-step genomic BLUP were back-solved to obtain the individual SNP effects for RFI. The proportion of genetic variance explained by each 5-SNP sliding window was also calculated for RFI. Our GWA analyses suggested that RFI is a highly polygenic trait regulated by many genes with small effects. The closest genes to the top SNP and sliding windows were associated with dry matter intake (DMI), RFI, energy homeostasis and energy balance regulation, digestion and metabolism of carbohydrates and proteins, immune regulation, leptin signaling, mitochondrial ATP activities, rumen development, skeletal muscle development, and spermatogenesis. The region of 40.7 to 41.5 Mb on BTA25 (UMD3.1 reference genome) was the top associated region for RFI. The closest genes to this region, CARD11 and EIF3B, were previously shown to be related to RFI of dairy cattle and FE of broilers, respectively. Another candidate region, 57.7 to 58.2 Mb on BTA18, which is associated with DMI and leptin signaling, was also associated with RFI in this study. Post-GWA enrichment analyses used a sum-based marker-set test based on 4 public annotation databases: Gene Ontology, Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways, Reactome pathways, and medical subject heading (MeSH) terms. Results of these analyses were consistent with those from the top GWA signals. Across the 4 databases, GWA signals for RFI were highly enriched in the biosynthesis and metabolism of amino acids and proteins, digestion and metabolism of carbohydrates, skeletal development, mitochondrial electron transport, immunity, rumen bacteria activities, and sperm motility. Our findings offer novel insight into the genetic basis of RFI and identify candidate regions and biological pathways associated with RFI in dairy cattle.

GWAS and eQTL analysis identifies a SNP associated with both residual feed intake and GFRA2 expression in beef cattle

Residual feed intake (RFI), a measure of feed efficiency, is an important economic and environmental trait in beef production. Selection of low RFI (feed efficient) cattle could maintain levels of production, while decreasing feed costs and methane emissions. However, RFI is a difficult and expensive trait to measure. Identification of single nucleotide polymorphisms (SNPs) associated with RFI may enable rapid, cost effective genomic selection of feed efficient cattle. Genome-wide association studies (GWAS) were conducted in multiple breeds followed by meta-analysis to identify genetic variants associated with RFI and component traits (average daily gain (ADG) and feed intake (FI)) in Irish beef cattle (n = 1492). Expression quantitative trait loci (eQTL) analysis was conducted to identify functional effects of GWAS-identified variants. Twenty-four SNPs were associated (P < 5 × 10^-5) with RFI, ADG or FI. The variant rs43555985 exhibited strongest association for RFI (P = 8.28E-06). An eQTL was identified between this variant and GFRA2 (P = 0.0038) where the allele negatively correlated with RFI was associated with increased GFRA2 expression in liver. GFRA2 influences basal metabolic rates, suggesting a mechanism by which genetic variation may contribute to RFI. This study identified SNPs that may be useful both for genomic selection of RFI and for understanding the biology of feed efficiency.

Transcriptome analyses reveal reduced hepatic lipid synthesis and accumulation in more feed efficient beef cattle

The genetic mechanisms controlling residual feed intake (RFI) in beef cattle are still largely unknown. Here we performed whole transcriptome analyses to identify differentially expressed (DE) genes and their functional roles in liver tissues between six extreme high and six extreme low RFI steers from three beef breed populations including Angus, Charolais, and Kinsella Composite (KC). On average, the next generation sequencing yielded 34 million single-end reads per sample, of which 87% were uniquely mapped to the bovine reference genome. At false discovery rate (FDR) < 0.05 and fold change (FC) > 2, 72, 41, and 175 DE genes were identified in Angus, Charolais, and KC, respectively. Most of the DE genes were breed-specific, while five genes including TP53INP1, LURAP1L, SCD, LPIN1, and ENSBTAG00000047029 were common across the three breeds, with TP53INP1, LURAP1L, SCD, and LPIN1 being downregulated in low RFI steers of all three breeds. The DE genes are mainly involved in lipid, amino acid and carbohydrate metabolism, energy production, molecular transport, small molecule biochemistry, cellular development, and cell death and survival. Furthermore, our differential gene expression results suggest reduced hepatic lipid synthesis and accumulation processes in more feed efficient beef cattle of all three studied breeds.

Transcriptomic Profiles of Brain Provide Insights into Molecular Mechanism of Feed Conversion Efficiency in Crucian Carp (Carassius auratus)

Feed efficiency is an economically crucial trait for cultured animals, however, progress has been scarcely made in the genetic analyses of feed conversion efficiency (FCE) in fish because of the difficulties in measurement of trait phenotypes. In the present investigation, we present the first application of RNA sequencing (RNA-Seq) combined with differentially expressed genes (DEGs) analysis for identification of functional determinants related to FCE at the gene level in an aquaculture fish, crucian carp (Carassius auratus). Brain tissues of six crucian carp with extreme FCE performances were subjected to transcriptome analysis. A total of 544,612 unigenes with a mean size of 644.38 bp were obtained from Low- and High-FCE groups, and 246 DEGs that may be involved in FCE traits were identified in these two groups. qPCR confirmed that genes previously identified as up- or down-regulated by RNA-Seq were effectively up- or down-regulated under the studied conditions. Thirteen key genes, whose functions are associated with metabolism (Dgkk, Mgst3 and Guk1b), signal transduction (Vdnccsa1b, Tgfα, Nr4a1 and Tacr2) and growth (Endog, Crebrtc2, Myh7, Myh1,Myh14 and Igfbp7) were identified according to GO (Gene Ontology) and KEGG (Kyoto Encyclopedia of Genes and Genomes) annotations. Our novel findings provide useful pathway information and candidate genes for future studies of genetic mechanisms underlying FCE in crucian carp.

Genome-wide association analyses based on a multiple-trait approach for modeling feed efficiency

Genome-wide association (GWA) of feed efficiency (FE) could help target important genomic regions influencing FE. Data provided by an international dairy FE research consortium consisted of phenotypic records on dry matter intakes (DMI), milk energy (MILKE), and metabolic body weight (MBW) on 6,937 cows from 16 stations in 4 counties. Of these cows, 4,916 had genotypes on 57,347 single nucleotide polymorphism (SNP) markers. We compared a GWA analysis based on the more classical residual feed intake (RFI) model with one based on a previously proposed multiple trait (MT) approach for modeling FE using an alternative measure (DMI|MILKE,MBW). Both models were based on a single-step genomic BLUP procedure that allowed the use of phenotypes from both genotyped and nongenotyped cows. Estimated effects for single SNP markers were small and not statistically important but virtually identical for either FE measure (RFI vs. DMI|MILKE,MBW). However, upon further refining this analysis to develop joint tests within nonoverlapping 1-Mb windows, significant associations were detected between either measure of FE with a window on each of Bos taurus autosomes BTA12 and BTA26. There was, as expected, no overlap between detected genomic regions for DMI|MILKE,MBW and genomic regions influencing the energy sink traits (i.e., MILKE and MBW) because of orthogonal relationships clearly defined between the various traits. Conversely, GWA inferences on DMI can be demonstrated to be partly driven by genetic associations between DMI with these same energy sink traits, thereby having clear implications when comparing GWA studies on DMI to GWA studies on FE-like measures such as RFI.

Detection of candidate genes for growth and carcass traits using genome-wide association strategy in Chinese Simmental beef cattle

In Chinese beef cattle industry, there are more than 60 million livestock, nearly half of which are Chinese Simmental beef cattle or Simmental crossbreds. Over the past decades, numerous quantitative trait loci for economic traits in cattle have been identified, while few studies for growth and carcass traits have been reported in Simmental beef cattle. In the present study, we conducted genome-wide association study based on BovineHD BeadChip and identified 41, 15, 3, 22 and 16 single-nucleotide polymorphisms significantly associated with average daily gain, liveweight before slaughter, carcass weight, dressing percentage and pure meat percentage respectively. In total, 18 candidate genes were found for growth and carcass traits, and four haplotype blocks for growth and carcass traits were discovered. These findings will facilitate detection of major genes and genetic variants involved in growth and carcass traits of beef cattle in further studies.

Quantitative trait loci mapping for feed conversion efficiency in crucian carp (Carassius auratus)

QTL is a chromosomal region including single gene or gene clusters that determine a quantitative trait. While feed efficiency is highly important in aquaculture fish, little genetic and genomic progresses have been made for this trait. In this study, we constructed a high-resolution genetic linkage map in a full-sib F1 family of crucian carp (Carassius auratus) consisting of 113 progenies with 8,460 SNP markers assigning onto 50 linkage groups (LGs). This genetic map spanned 4,047.824 cM (0.478 cM/marker) and covered 98.76% of the crucian carp genome. 35 chromosome-wide QTL affecting feed conversion efficiency (FCE, 8 QTL), relative growth rate (RGR, 9 QTL), average daily gain (ADG, 13 QTL) and average daily feed intake (ADFI, 5 QTL) were detected on 14 LGs, explaining 14.0–20.9% of the phenotypic variations. In LGs of LG16, LG25, LG36 and LG49, several QTL affecting different traits clustered together at the identical or close regions of the same linkage group. Seven candidate genes, whose biological functions may involve in the energy metabolism, digestion, biosynthesis and signal transduction, were identified from these QTL intervals by comparative genomics analysis. These results provide a basis for elucidating genetic mechanism of feed efficiency and potential marker-assisted selection in crucian carp.

Genome-wide association study for feed efficiency and growth traits in U.S. beef cattle

Background

Single nucleotide polymorphism (SNP) arrays for domestic cattle have catalyzed the identification of genetic markers associated with complex traits for inclusion in modern breeding and selection programs. Using actual and imputed Illumina 778K genotypes for 3887 U.S. beef cattle from 3 populations (Angus, Hereford, SimAngus), we performed genome-wide association analyses for feed efficiency and growth traits including average daily gain (ADG), dry matter intake (DMI), mid-test metabolic weight (MMWT), and residual feed intake (RFI), with marker-based heritability estimates produced for all traits and populations.

Results

Moderate and/or large-effect QTL were detected for all traits in all populations, as jointly defined by the estimated proportion of variance explained (PVE) by marker effects (PVE ≥ 1.0%) and a nominal P-value threshold (P ≤ 5e-05). Lead SNPs with PVE ≥ 2.0% were considered putative evidence of large-effect QTL (n = 52), whereas those with PVE ≥ 1.0% but < 2.0% were considered putative evidence for moderate-effect QTL (n = 35). Identical or proximal lead SNPs associated with ADG, DMI, MMWT, and RFI collectively supported the potential for either pleiotropic QTL, or independent but proximal causal mutations for multiple traits within and between the analyzed populations. Marker-based heritability estimates for all investigated traits ranged from 0.18 to 0.60 using 778K genotypes, or from 0.17 to 0.57 using 50K genotypes (reduced from Illumina 778K HD to Illumina Bovine SNP50). An investigation to determine if QTL detected by 778K analysis could also be detected using 50K genotypes produced variable results, suggesting that 50K analyses were generally insufficient for QTL detection in these populations, and that relevant breeding or selection programs should be based on higher density analyses (imputed or directly ascertained).

Conclusions

Fourteen moderate to large-effect QTL regions which ranged from being physically proximal (lead SNPs ≤ 3Mb) to fully overlapping for RFI, DMI, ADG, and MMWT were detected within and between populations, and included evidence for pleiotropy, proximal but independent causal mutations, and multi-breed QTL. Bovine positional candidate genes for these traits were functionally conserved across vertebrate species.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-017-3754-y) contains supplementary material, which is available to authorized users.

Multi-strategy genome-wide association studies identify the DCAF16-NCAPG region as a susceptibility locus for average daily gain in cattle

Average daily gain (ADG) is the most economically important trait in beef cattle industry. Using genome-wide association study (GWAS) approaches, previous studies have identified several causal variants within the PLAG1, NCAPG and LCORL genes for ADG in cattle. Multi-strategy GWASs were implemented in this study to improve detection and to explore the causal genes and regions. In this study, we conducted GWASs based on the genotypes of 1,173 Simmental cattle. In the SNP-based GWAS, the most significant SNPs (rs109303784 and rs110058857, P = 1.78 × 10⁻⁷) were identified in the NCAPG intron on BTA6 and explained 4.01% of the phenotypic variance, and the independent and significant SNP (rs110406669, P = 5.18 × 10⁻⁶) explained 3.32% of the phenotypic variance. Similarly, in the haplotype-based GWAS, the most significant haplotype block, Hap-6-N1416 (P = 2.56 × 10⁻⁸), spanned 12.7 kb on BTA6 and explained 4.85% of the phenotypic variance. Also, in the gene-based GWAS, seven significant genes were obtained which included DCAF16 and NCAPG. Moreover, analysis of the transcript levels confirmed that transcripts abundance of NCAPG (P = 0.046) and DCAF16 (P = 0.046) were significantly correlated with the ADG trait. Overall, our results from the multi-strategy GWASs revealed the DCAF16-NCAPG region to be a susceptibility locus for ADG in cattle.

Copy number variations and genome-wide associations reveal putative genes and metabolic pathways involved with the feed conversion ratio in beef cattle

The use of genome-wide association results combined with other genomic approaches may uncover genes and metabolic pathways related to complex traits. In this study, the phenotypic and genotypic data of 1475 Nellore (Bos indicus) cattle and 941,033 single nucleotide polymorphisms (SNPs) were used for genome-wide association study (GWAS) and copy number variations (CNVs) analysis in order to identify candidate genes and putative pathways involved with the feed conversion ratio (FCR). The GWAS was based on the Bayes B approach analyzing genomic windows with multiple regression models to estimate the proportion of genetic variance explained by each window. The CNVs were detected with PennCNV software using the log R ratio and B allele frequency data. CNV regions (CNVRs) were identified with CNVRuler and a linear regression was used to associate CNVRs and the FCR. Functional annotation of associated genomic regions was performed with the Database for Annotation, Visualization and Integrated Discovery (DAVID) and the metabolic pathways were obtained from the Kyoto Encyclopedia of Genes and Genomes (KEGG). We showed five genomic windows distributed over chromosomes 4, 6, 7, 8, and 24 that explain 12 % of the total genetic variance for FCR, and detected 12 CNVRs (chromosomes 1, 5, 7, 10, and 12) significantly associated [false discovery rate (FDR) < 0.05] with the FCR. Significant genomic regions (GWAS and CNV) harbor candidate genes involved in pathways related to energetic, lipid, and protein metabolism. The metabolic pathways found in this study are related to processes directly connected to feed efficiency in beef cattle. It was observed that, even though different genomic regions and genes were found between the two approaches (GWAS and CNV), the metabolic processes covered were related to each other. Therefore, a combination of the approaches complement each other and lead to a better understanding of the FCR.

Integrating Genomics with Nutrition Models to Improve the Prediction of Cattle Performance and Carcass Composition under Feedlot Conditions

Cattle body composition is difficult to model because several factors affect the composition of the average daily gain (ADG) of growing animals. The objective of this study was to identify commercial single nucleotide polymorphism (SNP) panels that could improve the predictability of days on feed (DOF) to reach a target United States Department of Agriculture (USDA) grade given animal, diet, and environmental information under feedyard conditions. The data for this study was comprised of crossbred heifers (n = 681) and steers (n = 836) from commercial feedyards. Eleven molecular breeding value (MBV) scores derived from SNP panels of candidate gene polymorphisms and two-leptin gene SNP (UASMS2 and E2FB) were evaluated. The empty body fat (EBF) and the shrunk body weight (SBW) at 28% EBF (AFSBW) were computed by the Cattle Value Discovery System (CVDS) model using hip height (EBF_HH and AFSBW_HH) or carcass traits (EBF_CT and AFSBW_CT) of the animals. The DOF_HH was calculated when AFSBW_HH and ADG_HH were used and DOF_CT was calculated when AFSBW_CT and ADG_CT were used. The CVDS estimates dry matter required (DMR) by individuals fed in groups when observed ADG and AFSBW are provided. The AFSBW_CT was assumed more accurate than the AFSBW_HH because it was computed using carcass traits. The difference between AFSBW_CT and AFSBW_HH, DOF_CT and DOF_HH, and DMR and dry matter intake (DMI) were regressed on the MBV scores and leptin gene SNP to explain the variation. Our results indicate quite a large range of correlations among MBV scores and model input and output variables, but MBV ribeye area was the most strongly correlated with the differences in DOF, AFSBW, and DMI by explaining 8, 13.2 and 6.5%, respectively, of the variation. This suggests that specific MBV scores might explain additional variation of input and output variables used by nutritional models in predicting individual animal performance.

Stories and Challenges of Genome Wide Association Studies in Livestock - A Review

Undoubtedly livestock is one of the major contributors to the economy of any country. The economic value of livestock includes meat, dairy products, fiber, fertilizer etc. Understanding and identifying the associations of quantitative trait loci (QTL) with the economically important traits is believed to substantially benefit the livestock industry. The past two decades have seen a flurry of interest in mapping the QTL associated with traits of economic importance on the genome. With the availability of single nucleotide polymorphism chip of various densities it is possible to identify regions, QTL and genes on the genome that explain the association and its effect on the phenotype under consideration. Remarkable advancement has been seen in genome wide association studies (GWAS) since its inception till the present day. In this review we describe the progress and challenges of GWAS in various livestock species.

Systems biology analysis merging phenotype, metabolomic and genomic data identifies Non-SMC Condensin I Complex, Subunit G (NCAPG) and cellular maintenance processes as major contributors to genetic variability in bovine feed efficiency

Feed efficiency is a paramount factor for livestock economy. Previous studies had indicated a substantial heritability of several feed efficiency traits. In our study, we investigated the genetic background of residual feed intake, a commonly used parameter of feed efficiency, in a cattle resource population generated from crossing dairy and beef cattle. Starting from a whole genome association analysis, we subsequently performed combined phenotype-metabolome-genome analysis taking a systems biology approach by inferring gene networks based on partial correlation and information theory approaches. Our data about biological processes enriched with genes from the feed efficiency network suggest that genetic variation in feed efficiency is driven by genetic modulation of basic processes relevant to general cellular functions. When looking at the predicted upstream regulators from the feed efficiency network, the Tumor Protein P53 (TP53) and Transforming Growth Factor beta 1 (TGFB1) genes stood out regarding significance of overlap and number of target molecules in the data set. These results further support the hypothesis that TP53 is a major upstream regulator for genetic variation of feed efficiency. Furthermore, our data revealed a significant effect of both, the Non-SMC Condensin I Complex, Subunit G (NCAPG) I442M (rs109570900) and the Growth /differentiation factor 8 (GDF8) Q204X (rs110344317) loci, on residual feed intake and feed conversion. For both loci, the growth promoting allele at the onset of puberty was associated with a negative, but favorable effect on residual feed intake. The elevated energy demand for increased growth triggered by the NCAPG 442M allele is obviously not fully compensated for by an increased efficiency in converting feed into body tissue. As a consequence, the individuals carrying the NCAPG 442M allele had an additional demand for energy uptake that is reflected by the association of the allele with increased daily energy intake as observed in our study.

Non-additive genetic variation in growth, carcass and fertility traits of beef cattle

Background

A better understanding of non-additive variance could lead to increased knowledge on the genetic control and physiology of quantitative traits, and to improved prediction of the genetic value and phenotype of individuals. Genome-wide panels of single nucleotide polymorphisms (SNPs) have been mainly used to map additive effects for quantitative traits, but they can also be used to investigate non-additive effects. We estimated dominance and epistatic effects of SNPs on various traits in beef cattle and the variance explained by dominance, and quantified the increase in accuracy of phenotype prediction by including dominance deviations in its estimation.

Methods

Genotype data (729 068 real or imputed SNPs) and phenotypes on up to 16 traits of 10 191 individuals from Bos taurus, Bos indicus and composite breeds were used. A genome-wide association study was performed by fitting the additive and dominance effects of single SNPs. The dominance variance was estimated by fitting a dominance relationship matrix constructed from the 729 068 SNPs. The accuracy of predicted phenotypic values was evaluated by best linear unbiased prediction using the additive and dominance relationship matrices. Epistatic interactions (additive × additive) were tested between each of the 28 SNPs that are known to have additive effects on multiple traits, and each of the other remaining 729 067 SNPs.

Results

The number of significant dominance effects was greater than expected by chance and most of them were in the direction that is presumed to increase fitness and in the opposite direction to inbreeding depression. Estimates of dominance variance explained by SNPs varied widely between traits, but had large standard errors. The median dominance variance across the 16 traits was equal to 5% of the phenotypic variance. Including a dominance deviation in the prediction did not significantly increase its accuracy for any of the phenotypes. The number of additive × additive epistatic effects that were statistically significant was greater than expected by chance.

Conclusions

Significant dominance and epistatic effects occur for growth, carcass and fertility traits in beef cattle but they are difficult to estimate precisely and including them in phenotype prediction does not increase its accuracy.

Genetic and genomic analyses for economically important traits and their applications in molecular breeding of cultured fish

The traits of cultured fish must continually be genetically improved to supply high-quality animal protein for human consumption. Economically important fish traits are controlled by multiple gene quantitative trait loci (QTL), most of which have minor effects, but a few genes may have major effects useful for molecular breeding. In this review, we chose relevant studies on some of the most intensively cultured fish and concisely summarize progress on identifying and verifying QTLs for such traits as growth, disease and stress resistance and sex in recent decades. The potential applications of these major-effect genes and their associated markers in marker-assisted selection and molecular breeding, as well as future research directions are also discussed. These genetic and genomic analyses will be valuable for elucidating the mechanisms modulating economically important traits and to establish more effective molecular breeding techniques in fish.

QTLs associated with dry matter intake, metabolic mid-test weight, growth and feed efficiency have little overlap across 4 beef cattle studies

Background

The identification of genetic markers associated with complex traits that are expensive to record such as feed intake or feed efficiency would allow these traits to be included in selection programs. To identify large-effect QTL, we performed a series of genome-wide association studies and functional analyses using 50 K and 770 K SNP genotypes scored in 5,133 animals from 4 independent beef cattle populations (Cycle VII, Angus, Hereford and Simmental × Angus) with phenotypes for average daily gain, dry matter intake, metabolic mid-test body weight and residual feed intake.

Results

A total of 5, 6, 11 and 10 significant QTL (defined as 1-Mb genome windows with Bonferroni-corrected P-value <0.05) were identified for average daily gain, dry matter intake, metabolic mid-test body weight and residual feed intake, respectively. The identified QTL were population-specific and had little overlap across the 4 populations. The pleiotropic or closely linked QTL on BTA 7 at 23 Mb identified in the Angus population harbours a promising candidate gene ACSL6 (acyl-CoA synthetase long-chain family member 6), and was the largest effect QTL associated with dry matter intake and mid-test body weight explaining 10.39% and 14.25% of the additive genetic variance, respectively. Pleiotropic or closely linked QTL associated with average daily gain and mid-test body weight were detected on BTA 6 at 38 Mb and BTA 7 at 93 Mb confirming previous reports. No QTL for residual feed intake explained more than 2.5% of the additive genetic variance in any population. Marker-based estimates of heritability ranged from 0.21 to 0.49 for residual feed intake across the 4 populations.

Conclusions

This GWAS study, which is the largest performed for feed efficiency and its component traits in beef cattle to date, identified several large-effect QTL that cumulatively explained a significant percentage of additive genetic variance within each population. Differences in the QTL identified among the different populations may be due to differences in power to detect QTL, environmental variation, or differences in the genetic architecture of trait variation among breeds. These results enhance our understanding of the biology of growth, feed intake and utilisation in beef cattle.

Genome-wide association study for feedlot average daily gain in Nellore cattle (Bos indicus)

The genome-wide association study (GWAS) results are presented for average daily gain (ADG) in Nellore cattle. Phenotype of 720 male Bos indicus animals with information of ADG in feedlots and 354,147 single-nucleotide polymorphisms (SNPs) obtained from a database added by information from Illumina Bovine HD (777,962 SNPs) and Illumina BovineSNP50 (54,609) by imputation were used. After quality control and imputation, 290,620 SNPs remained in the association analysis, using R package Genome-wide Rapid Association using Mixed Model and Regression method GRAMMAR-Gamma. A genomic region with six significant SNPs, at Bonferroni-corrected significance, was found on chromosome 3. The most significant SNP (rs42518459, BTA3: 85849977, p = 9.49 × 10(-8)) explained 5.62% of the phenotypic variance and had the allele substitution effect of -0.269 kg/day. Important genes such as PDE4B, LEPR, CYP2J2 and FGGY are located near this region, which is overlapped by 12 quantitative trait locus (QTLs) described for several production traits. Other regions with markers with suggestive effects were identified in BTA6 and BTA10. This study showed regions with major effects on ADG in Bos indicus in feedlots. This information may be useful to increase the efficiency of selecting this trait and to understand the physiological processes involved in its regulation.

Genome-wide association and systems genetic analyses of residual feed intake, daily feed consumption, backfat and weight gain in pigs

Background

Feed efficiency is one of the major components determining costs of animal production. Residual feed intake (RFI) is defined as the difference between the observed and the expected feed intake given a certain production. Residual feed intake 1 (RFI1) was calculated based on regression of individual daily feed intake (DFI) on initial test weight and average daily gain. Residual feed intake 2 (RFI2) was as RFI1 except it was also regressed with respect to backfat (BF). It has been shown to be a sensitive and accurate measure for feed efficiency in livestock but knowledge of the genomic regions and mechanisms affecting RFI in pigs is lacking. The study aimed to identify genetic markers and candidate genes for RFI and its component traits as well as pathways associated with RFI in Danish Duroc boars by genome-wide associations and systems genetic analyses.

Results

Phenotypic and genotypic records (using the Illumina Porcine SNP60 BeadChip) were available on 1,272 boars. Fifteen and 12 loci were significantly associated (p < 1.52 × 10^-6) with RFI1 and RFI2, respectively. Among them, 10 SNPs were significantly associated with both RFI1 and RFI2 implying the existence of common mechanisms controlling the two RFI measures. Significant QTL regions for component traits of RFI (DFI and BF) were detected on pig chromosome (SSC) 1 (for DFI) and 2 for (BF). The SNPs within MAP3K5 and PEX7 on SSC 1, ENSSSCG00000022338 on SSC 9, and DSCAM on SSC 13 might be interesting markers for both RFI measures. Functional annotation of genes in 0.5 Mb size flanking significant SNPs indicated regulation of protein and lipid metabolic process, gap junction, inositol phosphate metabolism and insulin signaling pathway are significant biological processes and pathways for RFI, respectively.

Conclusions

The study detected novel genetic variants and QTLs on SSC 1, 8, 9, 13 and 18 for RFI and indicated significant biological processes and metabolic pathways involved in RFI. The study also detected novel QTLs for component traits of RFI. These results improve our knowledge of the genetic architecture and potential biological pathways underlying RFI; which would be useful for further investigations of key candidate genes for RFI and for development of biomarkers.

Single nucleotide polymorphisms for feed efficiency and performance in crossbred beef cattle

Background

This study was conducted to: (1) identify new SNPs for residual feed intake (RFI) and performance traits within candidate genes identified in a genome wide association study (GWAS); (2) estimate the proportion of variation in RFI explained by the detected SNPs; (3) estimate the effects of detected SNPs on carcass traits to avoid undesirable correlated effects on these economically important traits when selecting for feed efficiency; and (4) map the genes to biological mechanisms and pathways. A total number of 339 SNPs corresponding to 180 genes were tested for association with phenotypes using a single locus regression (SLRM) and genotypic model on 726 and 990 crossbred animals for feed efficiency and carcass traits, respectively.

Results

Strong evidence of associations for RFI were located on chromosomes 8, 15, 16, 18, 19, 21, and 28. The strongest association with RFI (P = 0.0017) was found with a newly discovered SNP located on BTA 8 within the ELP3 gene. SNPs rs41820824 and rs41821600 on BTA 16 within the gene HMCN1 were strongly associated with RFI (P = 0.0064 and P = 0.0033, respectively). A SNP located on BTA 18 within the ZNF423 gene provided strong evidence for association with RFI (P = 0.0028). Genomic estimated breeding values (GEBV) from 98 significant SNPs were moderately correlated (0.47) to the estimated breeding values (EBVs) from a mixed animal model. The significant (P < 0.05) SNPs (98) explained 26% of the genetic variance for RFI. In silico functional analysis for the genes suggested 35 and 39 biological processes and pathways, respectively for feed efficiency traits.

Conclusions

This study identified several positional and functional candidate genes involved in important biological mechanisms associated with feed efficiency and performance. Significant SNPs should be validated in other populations to establish their potential utilization in genetic improvement programs.

Analysis of biological networks and biological pathways associated with residual feed intake in beef cattle

In this study, biological networks were reconstructed from genes and metabolites significantly associated with residual feed intake (RFI) in beef cattle. The networks were then used to identify biological pathways associated with RFI. RFI is a measure of feed efficiency, which is independent of body size and growth; therefore selection for RFI is expected to result in cattle that consume less feed without adverse effects on growth rate and mature size. Although several studies have identified genes associated with RFI, the mechanisms of the biological processes are not well understood. In this study, we utilised the results obtained from two association studies, one using 24 genes and one using plasma metabolites to reconstruct biological networks associated with RFI using IPA software (Igenuity Systems). The results pointed to biological processes such as lipid and steroid biosynthesis, protein and carbohydrate metabolism and regulation of gene expression through DNA transcription, protein stability and degradation. The major canonical pathways included signaling of growth hormone, Oncostatin M, insulin-like growth factor and AMP activated protein kinase, and cholesterol biosynthesis. This study provides information on potential biological mechanisms, and genes and metabolites involved in feed efficiency in beef cattle.

Bivariate genome-wide association analysis of the growth and intake components of feed efficiency

Single nucleotide polymorphisms (SNPs) associated with average daily gain (ADG) and dry matter intake (DMI), two major components of feed efficiency in cattle, were identified in a genome-wide association study (GWAS). Uni- and multi-SNP models were used to describe feed efficiency in a training data set and the results were confirmed in a validation data set. Results from the univariate and bivariate analyses of ADG and DMI, adjusted by the feedlot beef steer maintenance requirements, were compared. The bivariate uni-SNP analysis identified (P-value <0.0001) 11 SNPs, meanwhile the univariate analyses of ADG and DMI identified 8 and 9 SNPs, respectively. Among the six SNPs confirmed in the validation data set, five SNPs were mapped to KDELC2, PHOX2A, and TMEM40. Findings from the uni-SNP models were used to develop highly accurate predictive multi-SNP models in the training data set. Despite the substantially smaller size of the validation data set, the training multi-SNP models had slightly lower predictive ability when applied to the validation data set. Six Gene Ontology molecular functions related to ion transport activity were enriched (P-value <0.001) among the genes associated with the detected SNPs. The findings from this study demonstrate the complementary value of the uni- and multi-SNP models, and univariate and bivariate GWAS analyses. The identified SNPs can be used for genome-enabled improvement of feed efficiency in feedlot beef cattle, and can aid in the design of empirical studies to further confirm the associations.

Molecular value predictions: associations with beef quality, carcass, production, behavior, and efficiency phenotypes in Brahman cattle

Data from 2 previously published experiments, New South Wales (NSW; n = 161) and Western Australia (WA; n = 135), were used to test molecular value predictions (MVP), generated from commercially available gene markers, on economically important traits of Bos indicus (Brahman) cattle. Favorable tenderness MVP scores were associated with reduced shear force values of strip loin (LM) steaks aged 7 d from Achilles-hung carcasses (P ≤ 0.06), as well as steaks aged 1 (P ≤ 0.08) or 7 d (P ≤ 0.07) from carcasses hung from the pelvis (tenderstretch). Favorable tenderness MVP scores were also associated with improved consumer tenderness ratings for strip loin steaks aged 7 d and either Achilles hung (P ≤ 0.006) or tenderstretched (P ≤ 0.07). Similar results were observed in NSW for rump (top butt; gluteus medius) steaks, with favorable tenderness MVP scores associated with more tender (P = 0.006) and acceptable (P = 0.008) beef. Favorable marbling MVP scores were associated with improved (P ≤ 0.021) marbling scores and intramuscular fat (IMF) content in the NSW experiment, despite low variation in marbling in the Brahman cattle. For the WA experiment, however, there were no (P ≥ 0.71) relationships between marbling MVP and marbling scores or IMF content. Although residual (net) feed intake (RFI) was not associated (P = 0.63) with the RFI (feed efficiency) MVP, the RFI MVP was adversely associated with LM tenderness and acceptability of 7-d-aged Achilles-hung carcasses in NSW (P ≤ 0.031) and WA (P ≤ 0.037). Some other relationships and trends were noted between the MVP and the other traits, but few reached statistical significance, and none were evident in both experiments. Results from this study provide evidence to support the use of the tenderness MVP. The value of the marbling MVP, which was associated with marbling in only 1 herd, warrants further evaluation; however, there appears to be no evidence to support use of the RFI MVP in Brahman cattle.

Association analysis for feed efficiency traits in beef cattle using preserved haplotypes

This study reports a genome wide scan for chromosome regions and their haplotypes that significantly associated with average daily gain (ADG), dry matter intake (DMI), and residual feed intake (RFI) in beef cattle. The study used data from 597 Angus, 450 Charolais, and 616 crossbred beef cattle, and the Illumina Bovine SNP50 beadchip. Extended haplotype homozygosity was used to identify chromosome regions that had been recently selected for in the three groups of animals. Such regions in the crossbreds were tested for association with ADG, DMI, and RFI. At false discovery rates of 5% and 10%, there were six and eight chromosome regions showing significant associations with the traits, respectively. At nominal significance levels (at least P < 0.05), 23 regions with a total number of 31 haplotypes were found significantly associated with at least one of the three traits. The proportion of phenotypic variance explained by these 23 regions varied depending on the trait; the highest proportion for ADG, DMI, and RFI was 13.50%, 9.92%, and 2.64%, respectively. Most of the haplotypes affected single traits, except for GAA (BTA4), GCG (BTA7), and TAGT (BTA12) that affected multiple traits. Thirty-six quantitative trait loci for 16 production traits, from the current literature, covered fully or in part the 23 chromosome regions. The findings from this study might be an important contribution to the current knowledge of the beef cattle genome and to the effective identification of causative genes associated with important traits in cattle.

Single nucleotide polymorphisms and haplotypes associated with feed efficiency in beef cattle

BACKGROUND

General, breed- and diet-dependent associations between feed efficiency in beef cattle and single nucleotide polymorphisms (SNPs) or haplotypes were identified on a population of 1321 steers using a 50 K SNP panel. Genomic associations with traditional two-step indicators of feed efficiency - residual feed intake (RFI), residual average daily gain (RADG), and residual intake gain (RIG) - were compared to associations with two complementary one-step indicators of feed efficiency: efficiency of intake (EI) and efficiency of gain (EG). Associations uncovered in a training data set were evaluated on independent validation data set. A multi-SNP model was developed to predict feed efficiency. Functional analysis of genes harboring SNPs significantly associated with feed efficiency and network visualization aided in the interpretation of the results.

RESULTS

For the five feed efficiency indicators, the numbers of general, breed-dependent, and diet-dependent associations with SNPs (P-value < 0.0001) were 31, 40, and 25, and with haplotypes were six, ten, and nine, respectively. Of these, 20 SNP and six haplotype associations overlapped between RFI and EI, and five SNP and one haplotype associations overlapped between RADG and EG. This result confirms the complementary value of the one and two-step indicators. The multi-SNP models included 89 SNPs and offered a precise prediction of the five feed efficiency indicators. The associations of 17 SNPs and 7 haplotypes with feed efficiency were confirmed on the validation data set. Nine clusters of Gene Ontology and KEGG pathway categories (mean P-value < 0.001) including, 9nucleotide binding; ion transport, phosphorous metabolic process, and the MAPK signaling pathway were overrepresented among the genes harboring the SNPs associated with feed efficiency.

CONCLUSIONS

The general SNP associations suggest that a single panel of genomic variants can be used regardless of breed and diet. The breed- and diet-dependent associations between SNPs and feed efficiency suggest that further refinement of variant panels require the consideration of the breed and management practices. The unique genomic variants associated with the one- and two-step indicators suggest that both types of indicators offer complementary description of feed efficiency that can be exploited for genome-enabled selection purposes.

Genome-wide association analyses for carcass quality in crossbred beef cattle

Background

Genetic improvement of beef quality will benefit both producers and consumers, and can be achieved by selecting animals that carry desired quantitative trait nucleotides (QTN), which result from intensive searches using genetic markers. This paper presents a genome-wide association approach utilizing single nucleotide polymorphisms (SNP) in the Illumina BovineSNP50 BeadChip to seek genomic regions that potentially harbor genes or QTN underlying variation in carcass quality of beef cattle.

This study used 747 genotyped animals, mainly crossbred, with phenotypes on twelve carcass quality traits, including hot carcass weight (HCW), back fat thickness (BF), Longissimus dorsi muscle area or ribeye area (REA), marbling scores (MRB), lean yield grade by Beef Improvement Federation formulae (BIFYLD), steak tenderness by Warner-Bratzler shear force 7-day post-mortem (LM7D) as well as body composition as determined by partial rib (IMPS 103) dissection presented as a percentage of total rib weight including body cavity fat (BDFR), lean (LNR), bone (BNR), intermuscular fat (INFR), subcutaneous fat (SQFR), and total fat (TLFR).

Results

At the genome wide level false discovery rate (FDR < 10%), eight SNP were found significantly associated with HCW. Seven of these SNP were located on Bos taurus autosome (BTA) 6. At a less stringent significance level (P < 0.001), 520 SNP were found significantly associated with mostly individual traits (473 SNP), and multiple traits (47 SNP). Of these significant SNP, 48 were located on BTA6, and 22 of them were in association with hot carcass weight. There were 53 SNP associated with percentage of rib bone, and 12 of them were on BTA20. The rest of the significant SNP were scattered over other chromosomes. They accounted for 1.90 - 5.89% of the phenotypic variance of the traits. A region of approximately 4 Mbp long on BTA6 was found to be a potential area to harbor candidate genes influencing growth. One marker on BTA25 accounting for 2.67% of the variation in LM7D may be worth further investigation for the improvement of beef tenderness.

Conclusion

This study provides useful information to further assist the identification of chromosome regions and subsequently genes affecting carcass quality traits in beef cattle. It also revealed many SNP that acted pleiotropically to affect carcass quality. This knowledge is important in selecting subsets of SNP to improve the performance of beef cattle.