Targeted drug delivery by high intensity focused ultrasound mediated hyperthermia combined with temperature-sensitive liposomes: computational modelling and preliminary in vivovalidation

Brain-Derived Neurotrophic Factor-Loaded Low-Temperature-Sensitive liposomes as a drug delivery system for repairing podocyte damage

Podocytes, cells of the glomerular filtration barrier, play a crucial role in kidney diseases and are gaining attention as potential targets for new therapies. Brain-Derived Neurotrophic Factor (BDNF) has shown promising results in repairing podocyte damage, but its efficacy via parenteral administration is limited by a short half-life. Low temperature sensitive liposomes (LTSL) are a promising tool for targeted BDNF delivery, preserving its activity after encapsulation. This study aimed to improve LTSL design for efficient BDNF encapsulation and targeted release to podocytes, while maintaining stability and biological activity, and exploiting the conjugation of targeting peptides. While cyclic RGD (cRGD) was used for targeting endothelial cells in vitro, a homing peptide (HITSLLS) was conjugated for more specific uptake by glomerular endothelial cells in vivo. BDNF-loaded LTSL successfully repaired cytoskeleton damage in podocytes and reduced albumin permeability in a glomerular co-culture model. cRGD conjugation enhanced endothelial cell targeting and uptake, highlighting an improved therapeutic effect when BDNF release was induced by thermoresponsive liposomal degradation. In vivo, targeted LTSL showed evidence of accumulation in the kidneys, and their BDNF delivery decreased proteinuria and ameliorated kidney histology. These findings highlight the potential of BDNF-LTSL formulations in restoring podocyte function and treating glomerular diseases.

Berberine loaded thermosensitive lipid nanoparticles: in vitro characterization, in silico study, and in vivo anti-arthritic effect

Thermoresponsive drug delivery systems have been used to treat diseases that cause hyperthermia or elevated body tissue temperatures, viz., rheumatoid arthritis and different cancers. The aim of the study was to enhance berberine (BER) release using thermosensitive nanostructured lipid carriers (TNLCs) through intra-articular administration for the management of arthritis. TNLCs were prepared using binary mixtures of stearic acid and decanoic acid as solid and liquid lipids, respectively. Lipid mixtures with an optimum melting point were assessed using differential scanning calorimetry studies. In vitro characterization of the BER TNLCs included particle size, zeta potential, entrapment efficiency, and drug release at 37 °C and 41 °C. Joint diameter measurement, real-time polymerase chain reaction (RT-PC) analysis, enzyme-linked immunosorbent assay (ELISA) for inflammatory markers, and histological evaluation of the dissected joints were all performed in vivo on rats with adjuvant-induced arthritis. In vitro characterization revealed negatively charged BER-loaded TNLCs with a spherical shape, particle size less than 500 nm, BER entrapment efficiency up to 79%, and a high drug release rate at an elevated temperature of 41 °C. In silico studies revealed the affinity of BER to different formula components and to the measured biomarkers. In vivo assessment of the optimum TNLCs showed that BER TNLCs were superior to the BER solution suspension regarding their effect on inflammatory biomarkers, joint diameter, and histological studies.

Image-based predictive modelling frameworks for personalised drug delivery in cancer therapy

Personalised drug delivery enables a tailored treatment plan for each patient compared to conventional drug delivery, where a generic strategy is commonly employed. It can not only achieve precise treatment to improve effectiveness but also reduce the risk of adverse effects to improve patients' quality of life. Drug delivery involves multiple interconnected physiological and physicochemical processes, which span a wide range of time and length scales. How to consider the impact of individual differences on these processes becomes critical. Multiphysics models are an open system that allows well-controlled studies on the individual and combined effects of influencing factors on drug delivery outcomes while accommodating the patient-specific in vivo environment, which is not economically feasible through experimental means. Extensive modelling frameworks have been developed to reveal the underlying mechanisms of drug delivery and optimise effective delivery plans. This review provides an overview of currently available models, their integration with advanced medical imaging modalities, and code packages for personalised drug delivery. The potential to incorporate new technologies (i.e., machine learning) in this field is also addressed for development.

Spatiotemporal modeling of nano-delivered chemotherapeutics for synergistic microwave ablation cancer therapy

BACKGROUND AND OBJECTIVE

The effectiveness of current microwave ablation (MWA) therapies is limited. Administration of thermosensitive liposomes (TSLs) which release drugs in response to heat has presented a significant potential for enhancing the efficacy of thermal ablation treatment, and the benefits of targeted drug delivery. However, a complete knowledge of the mechanobiological processes underlying the drug release process, especially the intravascular drug release mechanism and its distribution in response to MWA needs to be improved. Multiscale computational-based modeling frameworks, integrating different biophysical phenomena, have recently emerged as promising tools to decipher the mechanobiological events in combo therapies. The present study aims to develop a novel multiscale computational model of TSLs delivery following MWA implantation.

METHODS

Due to the complex interplay between the heating procedure and the drug concentration maps, a computational model is developed to determine the intravascular release of doxorubicin from TSL, its transvascular transport into the interstitium, transport in the interstitium, and cell uptake. Computational models can estimate the interplays among liposome and drug properties, tumor perfusion, and heating regimen to examine the impact of essential parameters and to optimize a targeted drug delivery platform.

RESULTS

Results indicated that the synergy of TSLs with MWA allows more localized drug delivery with lower side effects. The drug release rate and tumor permeability play crucial roles in the efficacy of TSLs during MWA treatment. The computational model predicted an unencapsulated drug lime around the ablated zone, which can destroy more cancer cells compared to MWA alone by 40%. Administration of TSLs with a high release rate capacity can improve the percentage of killed cancer cells by 24%. Since the heating duration in MWA is less than 15 min, the presented combination therapy showed better performance for highly permeable tumors.

CONCLUSION

This study highlights the potential of the proposed computational framework to address complex and realistic scenarios in cancer treatment, which can serve as the future research foundation, including advancements in nanomedicine and optimizing the pair of TSL and MWA for both preclinical and clinical studies. The present model could be as a valuable tool for patient-specific calibration of essential parameters.

Sound speed and attenuation of human pancreas and pancreatic tumors and their influence on focused ultrasound thermal and mechanical therapies

BACKGROUND

There is increasing interest in using ultrasound for thermal ablation, histotripsy, and thermal or cavitational enhancement of drug delivery for the treatment of pancreatic cancer. Ultrasonic and thermal modelling conducted as part of the treatment planning process requires acoustic property values for all constituent tissues, but the literature contains no data for the human pancreas.

PURPOSE

This study presents the first acoustic property measurements of human pancreatic samples and provides examples of how these properties impact a broad range of ultrasound therapies.

METHODS

Data were collected on human pancreatic tissue samples at physiological temperature from 23 consented patients in cooperation with a hospital pathology laboratory. Propagation of ultrasound over the 2.1-4.5 MHz frequency range through samples of various thicknesses and pathologies was measured using a set of custom-built ultrasonic calipers, with the data processed to estimate sound speed and attenuation. The results were used in acoustic and thermal simulations to illustrate the impacts on extracorporeal ultrasound therapies for mild hyperthermia, thermal ablation, and histotripsy implemented with a CE-marked clinical system operating at 0.96 MHz.

RESULTS

The mean sound speed and attenuation coefficient values for human samples were well below the range of values in the literature for non-human pancreata, while the human attenuation power law exponents were substantially higher. The simulated impacts on ultrasound mediated therapies for the pancreas indicated that when using the human data instead of the literature average, there was a 30% reduction in median temperature elevation in the treatment volume for mild hyperthermia and 43% smaller volume within a 60°C contour for thermal ablation, all driven by attenuation. By comparison, impacts on boiling and intrinsic threshold histotripsy were minor, with peak pressures changing by less than 15% (positive) and 1% (negative) as a consequence of the counteracting effects of attenuation and sound speed.

CONCLUSION

This study provides the most complete set of speed of sound and attenuation data available for the human pancreas, and it reiterates the importance of acoustic material properties in the planning and conduct of ultrasound-mediated procedures, particularly thermal therapies.

Ultrasound-mediated nano-sized drug delivery systems for cancer treatment: Multi-scale and multi-physics computational modeling

Computational modeling enables researchers to study and understand various complex biological phenomena in anticancer drug delivery systems (DDSs), especially nano-sized DDSs (NSDDSs). The combination of NSDDSs and therapeutic ultrasound (TUS), that is, focused ultrasound and low-intensity pulsed ultrasound, has made significant progress in recent years, opening many opportunities for cancer treatment. Multiple parameters require tuning and optimization to develop effective DDSs, such as NSDDSs, in which mathematical modeling can prove advantageous. In silico computational modeling of ultrasound-responsive DDS typically involves a complex framework of acoustic interactions, heat transfer, drug release from nanoparticles, fluid flow, mass transport, and pharmacodynamic governing equations. Owing to the rapid development of computational tools, modeling the different phenomena in multi-scale complex problems involved in drug delivery to tumors has become possible. In the present study, we present an in-depth review of recent advances in the mathematical modeling of TUS-mediated DDSs for cancer treatment. A detailed discussion is also provided on applying these computational models to improve the clinical translation for applications in cancer treatment. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease.

Influence of electric field, blood velocity, and pharmacokinetics on electrochemotherapy efficiency

The convective delivery of chemotherapeutic drugs in cancerous tissues is directly proportional to the blood perfusion rate, which in turns can be transiently reduced by the application of high-voltage and short-duration electric pulses due to vessel vasoconstriction. However, electric pulses can also increase vessel wall and cell membrane permeabilities, boosting the extravasation and cell internalization of drug. These opposite effects, as well as possible adverse impacts on the viability of tissues and endothelial cells, suggest the importance of conducting in silico studies about the influence of physical parameters involved in electric-mediated drug transport. In the present work, the global method of approximate particular solutions for axisymmetric domains, together with two solution schemes (Gauss-Seidel iterative and linearization+successive over-relaxation), is applied for the simulation of drug transport in electroporated cancer tissues, using a continuum tumor cord approach and considering both the electropermeabilization and vasoconstriction phenomena. The developed global method of approximate particular solutions algorithm is validated with numerical and experimental results previously published, obtaining a satisfactory accuracy and convergence. Then, a parametric study about the influence of electric field magnitude and inlet blood velocity on the internalization efficacy, drug distribution uniformity, and cell-kill capacity of the treatment, as expressed by the number of internalized moles into viable cells, homogeneity of exposure to bound intracellular drug, and cell survival fraction, respectively, is analyzed for three pharmacokinetic profiles, namely one-short tri-exponential, mono-exponential, and uniform. According to numerical results, the trade-off between vasoconstriction and electropermeabilization effects and, consequently, the influence of electric field magnitude and inlet blood velocity on the assessment parameters considered here (efficacy, uniformity, and cell-kill capacity) is different for each pharmacokinetic profile deemed.

Ultrasound-Mediated Ocular Drug Delivery: From Physics and Instrumentation to Future Directions

Drug delivery to the anterior and posterior segments of the eye is impeded by anatomical and physiological barriers. Increasingly, the bioeffects produced by ultrasound are being proven effective for mitigating the impact of these barriers on ocular drug delivery, though there does not appear to be a consensus on the most appropriate system configuration and operating parameters for this application. In this review, the fundamental aspects of ultrasound physics most pertinent to drug delivery are presented; the primary phenomena responsible for increased drug delivery efficacy under ultrasound sonication are discussed; an overview of common ocular drug administration routes and the associated ocular barriers is also given before reviewing the current state of the art of ultrasound-mediated ocular drug delivery and its potential future directions.

A Quantitative Study of Thermal and Non-thermal Mechanisms in Ultrasound-Induced Nano-drug Delivery

OBJECTIVE

The primary objective of this study was to quantify the contributions to drug release for thermal and non-thermal mechanisms in ultrasound-induced release from gold nanoparticles (GNPs) for the first time.

METHODS

We studied doxorubicin (DOX) and curcumin release from the surface of GNPs using two different methods to induce drug release in an ex vivo tissue model: (i) localized tissue heating with a water bath and (ii) low-intensity pulsed ultrasound (LIPUS) exposure. Both methods have similar temperature profiles and can induce the release of both hydrophobic (curcumin) and hydrophilic (DOX) drugs from the surface of GNPs. Quantitative drug release in both cases was compared via fluorescence measurements.

DISCUSSION

The water bath heating method induced drug release using thermal effects only, whereas LIPUS exposure induced drug release used a combination of thermal and non-thermal mechanisms. It was found that there were increases of 70 ± 16% (curcumin) and 127 ± 20% (DOX) in drug release when LIPUS was used to induce drug release (both thermal and non-thermal mechanisms) as compared with the water bath (thermal mechanisms only) mediated release.

CONCLUSION

We determined that non-thermal mechanisms account for 41 ± 3% of curcumin release and 56 ± 4% of DOX release. It was concluded that in our ex vivo tissue model, the non-thermal mechanisms play a significant role in LIPUS-induced drug release from GNP drug carriers and that the contributions of non-thermal mechanisms to drug release depend on the type of anticancer drug loaded on the GNP surface.

Review of the Delivery Kinetics of Thermosensitive Liposomes

Thermosensitive liposomes (TSL) are triggered nanoparticles that release the encapsulated drug in response to hyperthermia. Combined with localized hyperthermia, TSL enabled loco-regional drug delivery to tumors with reduced systemic toxicities. More recent TSL formulations are based on intravascular triggered release, where drug release occurs within the microvasculature. Thus, this delivery strategy does not require enhanced permeability and retention (EPR). Compared to traditional nanoparticle drug delivery systems based on EPR with passive or active tumor targeting (typically <5%ID/g tumor), TSL can achieve superior tumor drug uptake (>10%ID/g tumor). Numerous TSL formulations have been combined with various drugs and hyperthermia devices in preclinical and clinical studies over the last four decades. Here, we review how the properties of TSL dictate delivery and discuss the advantages of rapid drug release from TSL. We show the benefits of selecting a drug with rapid extraction by tissue, and with quick cellular uptake. Furthermore, the optimal characteristics of hyperthermia devices are reviewed, and impact of tumor biology and cancer cell characteristics are discussed. Thus, this review provides guidelines on how to improve drug delivery with TSL by optimizing the combination of TSL, drug, and hyperthermia method. Many of the concepts discussed are applicable to a variety of other triggered drug delivery systems.

Treating methicillin-resistant Staphylococcus aureus (MRSA) bone infection with focused ultrasound combined thermally sensitive liposomes

OBJECTIVE

Chronic bone infection caused by Staphylococcus aureus biofilms in children and adults is characterized by reduced antibiotic sensitivity. In this study, we assessed 'heat-targeted, on-demand' antibiotic delivery for S. aureus killing by combining ciprofloxacin (CIP)-laden low-temperature sensitive liposomes (LTSLs) with local high-intensity focused ultrasound (HIFU) induced bone heating in a rat model of bone infection.

METHODS

CIP-LTSLs were prepared using the thin-film hydration and extrusion method. Bone infection was established by surgically implanting an orthopedic K-wire colonized with methicillin-resistant S. aureus (MRSA) strain into rat's femurs. For bone heating, ultrasound-guided HIFU exposures were performed to achieve a local temperature of 40-42 °C (∼15 min) concurrently with intravenous injection of CIP-LTSLs or CIP. CIP biodistribution was determined spectrophotometrically and therapeutic efficacy was determined by bacteriological, histological and scanning electron microscopy (SEM) analyses.

RESULTS

CIP-LTSLs in the range of 183.5 nm ± 1.91 showed an encapsulation efficiency of >70% at 37 °C and a complete release at ∼42 °C. The metal implantation method yielded medullary osteomyelitis characterized by suppurative changes (bacterial and pus pockets) by day 10 in bones and adjoining muscle tissues. HIFU heating significantly improved CIP delivery from LTSLs in bones, resulting in a significant reduction in MRSA load compared to HIFU and CIP alone groups. These were also verified by histology and SEM, wherein a distinct reduction in S. aureus population in the infected metal wires and tissues from the combinatorial therapy was noted.

CONCLUSION

HIFU improved CIP delivery to bones, achieving clearance of hard-to-treat MRSA biofilms.

Large-Volume Focused-Ultrasound Mild Hyperthermia for Improving Blood-Brain Tumor Barrier Permeability Application

Mild hyperthermia can locally enhance permeability of the blood-tumor barrier in brain tumors, improving delivery of antitumor nanodrugs. However, a clinical transcranial focused ultrasound (FUS) system does not provide this modality yet. The study aimed at the development of the transcranial FUS technique dedicated for large-volume mild hyperthermia in the brain. Acoustic pressure, multiple-foci, temperature and thermal dose induced by FUS were simulated in the brain through the skull. A 1-MHz, 114-element, spherical helmet transducer was fabricated to verify large-volume hyperthermia in the phantom. The simulated results showed that two foci were simultaneously formed at (2, 0, 0) and (−2, 0, 0) and at (0, 2, 0) and (0, −2, 0), using the phases of focusing pattern 1 and the phases of focusing pattern 2, respectively. Switching two focusing patterns at 5 Hz produced a hyperthermic zone with an ellipsoid of 7 mm × 6 mm × 11 mm in the brain and the temperature was 41–45 °C in the ellipsoid as the maximum intensity was 150 W/cm² and sonication time was 3 min. The phased array driven by switching two mode phases generated a 41 °C-contour region of 10 ± 1 mm × 8 ± 2 mm × 13 ± 2 mm in the phantom after 3-min sonication. Therefore, we have demonstrated our developed FUS technique for large-volume mild hyperthermia.

GPU-accelerated study of the inertial cavitation threshold in viscoelastic soft tissue using a dual-frequency driving signal

Inertial cavitation thresholds under two forms of ultrasonic excitation (the single- and dual-frequency ultrasound modes) are studied numerically. The Gilmore-Akulichev model coupled with the Zener viscoelastic model is used to model the bubble dynamics. The threshold pressures are determined with two criteria, one based on the bubble radius and the other on the bubble collapse speed. The threshold behavior is investigated for different initial bubble sizes, acoustic signal modes, frequencies, tissue viscosities, tissue elasticities, and all their combinations. Due to the large number of parameters and their many combinations (around 1.5 billion for each threshold criterion), all simulations were executed on graphics processing units to speed up the calculations. We used our own code written in the C++ and CUDA C languages. The results obtained demonstrate that using the dual-frequency signal mode can help to reduce the inertial cavitation threshold (in comparison to the single-frequency mode). The criterion based on the bubble size gives a lower threshold than the criterion using the bubble collapse speed. With an increase of the elasticity, the threshold pressure also increases, whereas changing the viscosity has a very small impact on the optimal threshold, unlike the elasticity. A detailed analysis of the optimal ultrasound frequencies for a dual-frequency driving signal found that for viscosities less than 0.02 Pa·s, the first optimal frequency, in general, is much smaller than the second optimal frequency, which can reach 1 MHz. However, for high viscosities, both optimal frequencies are similar and varied in the range 0.01-0.05 MHz. Overall, this study presents a detailed analysis of inertial cavitation in soft tissue under dual-frequency signal excitation. It may be helpful for the further development of different applications of biomedical ultrasound.

Thermosensitive liposomes: A promising step towards locsalised chemotherapy

INTRODUCTION

Many small molecules and biologic therapeutics have been developed for solid tumor therapy. However, the unique physiology of tumors makes the actual delivery of these drugs into the tumor mass inefficient. Such delivery requires transport from blood vessels, across the vasculature and into and through interstitial space within a tumor. This transportation is dependent on the physiochemical properties of the therapeutic agent and the biological properties of the tumour. It was hoped the application of nanoscale drug carrier systems would solve this problem. However, issues with poor tumor accumulation and limited drug release have impeded clinical impact. In response, these carrier systems have been redesigned to be paired with targetable external mechanical stimuli which can trigger much enhanced drug release and deposition.

AREAS COVERED

The pre-clinical and clinical progress of thermolabile drug carrier systems and the modalities used to trigger the release of their cargo, is assessed.

EXPERT OPINION

Combined application of mild hyperthermia and heat-responsive liposomal drug carriers has great potential utility. Clinical trials continue to progress this approach and serve to refine the technologies, dosing regimens and exposure parameters that will provide optimal patient benefit.

An ultrasonically actuated needle promotes the transport of nanoparticles and fluids

Non-invasive therapeutic ultrasound (US) methods, such as high-intensity focused ultrasound (HIFU), have limited access to tissue targets shadowed by bones or presence of gas. This study demonstrates that an ultrasonically actuated medical needle can be used to translate nanoparticles and fluids under the action of nonlinear phenomena, potentially overcoming some limitations of HIFU. A simulation study was first conducted to study the delivery of a tracer with an ultrasonically actuated needle (33 kHz) inside a porous medium acting as a model for soft tissue. The model was then validated experimentally in different concentrations of agarose gel showing a close match with the experimental results, when diluted soot nanoparticles (diameter < 150 nm) were employed as delivered entity. An additional simulation study demonstrated a threefold increase in the volume covered by the delivered agent in liver under a constant injection rate, when compared to without US. This method, if developed to its full potential, could serve as a cost effective way to improve safety and efficacy of drug therapies by maximizing the concentration of delivered entities within, e.g., a small lesion, while minimizing exposure outside the lesion.

Magnetic cryogels as a shape-selective and customizable platform for hyperthermia-mediated drug delivery

Cryogels consisting of polyvinyl alcohol and iron (II, III) oxide magnetic nanoparticles coated with a model drug—acetaminophen, were developed as a tunable platform for thermally triggered drug release, based on shape-selective heat transfer. Two different shapes of cryogels; discs and spherical caps, were formed via adding polymer-nanoparticle-drug mixtures into 3D printed molds, followed by freeze-thawing five times. No additional chemical crosslinking agents were used for gel formation and the iron oxide nanoparticles were coated with acetaminophen using only citric acid as a hydrogen-bonding linker. The two gel shapes displayed varying levels of acetaminophen release within 42–50 °C, which are ideal temperatures for hyperthermia induced drug delivery. The amount and time of drug-release were shown to be tunable by changing the temperature of the medium and the shape of the gels, while keeping all other factors (ex. gel volume, surface area, polymer/nanoparticle concentrations and drug-loading) constant. The discs displayed higher drug release at all temperatures while being particularly effective at lower temperatures (42–46 °C), in contrast to the spherical caps, which were more effective at higher temperatures (48–50 °C). Magnetic hyperthermia-mediated thermal imaging and temperature profiling studies revealed starkly different heat transfer behavior from the two shapes of gels. The disc gels retained their structural integrity up to 51 °C, while the spherical caps were stable up to 59 °C, demonstrating shape-dependent robustness. The highly customizable physicochemical features, facile synthesis, biocompatibility and tunable drug release ability of these cryogels offer potential for their application as a low cost, safe and effective platform for hyperthermia-mediated drug delivery, for external applications such as wound care/muscle repair or internal applications such as melanoma treatment.

Selecting ideal drugs for encapsulation in thermosensitive liposomes and other triggered nanoparticles

OBJECTIVE

Thermosensitive liposomes (TSL) and other triggered drug delivery systems (DDS) are promising therapeutic strategies for targeted drug delivery. However, successful designs with candidate drugs depend on many variables, including nanoparticle formulation, drug properties, and cancer cell properties. We developed a computational model based on experimental data to predict the potential efficacies of drugs when used with triggered DDS, such as TSL.

METHODS

A computer model based on the Krogh cylinder was developed to predict uptake and cell survival with four anthracyclines when delivered by intravascular triggered DDS (e.g., TSL): doxorubicin (DOX), idarubicin (IDA), pirarubicin (PIR), and aclarubicin (ACLA). We simulated three tumor types derived from SVR angiosarcoma, LLC lung cancer, or SCC-1 oral carcinoma cells. In vitro cellular drug uptake and cytotoxicity data were obtained experimentally and incorporated into the model.

RESULTS

For all three cell lines, ACLA and IDA had the fastest cell uptake, with slower uptake for DOX and PIR. Cytotoxicity was highest for IDA and lowest for ACLA. The computer model predicted the highest tumor drug uptake for ACLA and IDA, resulting from their rapid cell uptake. Overall, IDA was most effective and produced the lowest tumor survival fraction, with DOX being the second best. Perivascular drug penetration was reduced for drugs with rapid cell uptake, potentially limiting delivery to cancer cells distant from the vasculature.

CONCLUSION

Combining simple in vitro experiments with a computer model could provide a powerful screening tool to evaluate the potential efficacy of candidate investigative drugs preceding TSL encapsulation and in vivo studies.

Untargeted Large Volume Hyperthermia Reduces Tumor Drug Uptake From Thermosensitive Liposomes

Goal: The impact of hyperthermia (HT) method on tumor drug uptake with thermosensitive liposomes (TSL) is not well understood. Methods: We created realistic three-dimensional (3-D) computer models that simulate TSL-encapsulated doxorubicin (TSL-DOX) delivery in mouse tumors with three HT methods (thermistor probe (T), laser (L) and water bath (WB), at 15 min and 60 min HT duration), with corroborating in vivo studies. Results: Average computer model-predicted tumor drug concentrations (μg/g) were 8.8(T, 15 min), 21.0(T, 60 min), 14.1(L, 15 min), 25.2(L, 60 min), 9.4(WB, 15 min), and 8.7(WB, 60 min). Tumor fluorescence was increased by 2.6 × (T) and 1.6 × (L) when HT duration was extended from 15 to 60 min (p < 0.05), with no increase for WB HT. Pharmacokinetic analysis confirmed that water bath HT causes rapid depletion of encapsulated TSL-DOX in systemic circulation due to the large heated tissue volume. Conclusions: Untargeted large volume HT causes poor tumor drug uptake from TSL.

Drug development of lyso-thermosensitive liposomal doxorubicin: Combining hyperthermia and thermosensitive drug delivery

We review the drug development of lyso-thermosensitive liposomal doxorubicin (LTLD) which is the first heat-activated formulation of a liposomal drug carrier to be utilized in human clinical trials. This class of compounds is designed to carry a payload of a cytotoxic agent and adequately circulate in order to accumulate at a tumor that is being heated. At the target the carrier is activated by heat and releases its contents at high concentrations. We summarize the preclinical and clinical experience of LTLD including its successes and challenges in the development process.

A systematic review of modeling and simulation approaches in designing targeted treatment technologies for Leukemia Cancer in low and middle income countries

Virtual experimentation is a widely used approach for predicting systems behaviour especially in situations where resources for physical experiments are very limited. For example, targeted treatment inside the human body is particularly challenging, and as such, modeling and simulation is utilised to aid planning before a specific treatment is administered. In such approaches, precise treatment, as it is the case in radiotherapy, is used to administer a maximum dose to the infected regions while minimizing the effect on normal tissue. Complicated cancers such as leukemia present even greater challenges due to their presentation in liquid form and not being localised in one area. As such, science has led to the development of targeted drug delivery, where the infected cells can be specifically targeted anywhere in the body. Despite the great prospects and advances of these modeling and simulation tools in the design and delivery of targeted drugs, their use by Low and Middle Income Countries (LMICs) researchers and clinicians is still very limited. This paper therefore reviews the modeling and simulation approaches for leukemia treatment using nanoparticles as an example for virtual experimentation. A systematic review from various databases was carried out for studies that involved cancer treatment approaches through modeling and simulation with emphasis to data collected from LMICs. Results indicated that whereas there is an increasing trend in the use of modeling and simulation approaches, their uptake in LMICs is still limited. According to the review data collected, there is a clear need to employ these tools as key approaches for the planning of targeted drug treatment approaches.

Drug transport kinetics of intravascular triggered drug delivery systems

Intravascular triggered drug delivery systems (IV-DDS) for local drug delivery include various stimuli-responsive nanoparticles that release the associated agent in response to internal (e.g., pH, enzymes) or external stimuli (e.g., temperature, light, ultrasound, electromagnetic fields, X-rays). We developed a computational model to simulate IV-DDS drug delivery, for which we quantified all model parameters in vivo in rodent tumors. The model was validated via quantitative intravital microscopy studies with unencapsulated fluorescent dye, and with two formulations of temperature-sensitive liposomes (slow, and fast release) encapsulating a fluorescent dye as example IV-DDS. Tumor intra- and extravascular dye concentration dynamics were extracted from the intravital microscopy data by quantitative image processing, and were compared to computer model results. Via this computer model we explain IV-DDS delivery kinetics and identify parameters of IV-DDS, of drug, and of target tissue for optimal delivery. Two parameter ratios were identified that exclusively dictate how much drug can be delivered with IV-DDS, indicating the importance of IV-DDS with fast drug release (~sec) and choice of a drug with rapid tissue uptake (i.e., high first-pass extraction fraction). The computational model thus enables engineering of improved future IV-DDS based on tissue parameters that can be quantified by imaging.

Ten Hagen et al. developed a computational model to simulate intravascular triggered drug delivery systems (IV-DDS), which they validated using quantitative intravital microscopy in mice. Their model potentially enables the engineering of more efficacious IV-DDS based on parameters that can be quantified by imaging.

The effect of injected dose on localized tumor accumulation and cardiac uptake of doxorubicin in a Vx2 rabbit tumor model using MR-HIFU mild hyperthermia and thermosensitive liposomes

PURPOSE

When doxorubicin (DOX) is administered via lyso-thermosensitive liposomes (LTLD), mild hyperthermia enhances localized delivery to heated vs. unheated tumors. The optimal LTLD dose and the impact of different doses on systemic drug distribution are unknown.

Materials and methods: In this study, we evaluated local and systemic DOX delivery with three LTLD doses (0.1, 0.5, and 2.5 mg/kg) in a Vx2 rabbit tumor model. Temporally and spatially accurate controlled hyperthermia was achieved using a clinical MR-HIFU system for the intended heating duration (40 min).

Results: DOX concentration in tissues delivered from LTLD combined with MR-HIFU mild hyperthermia are dose-dependent, including heated/unheated tumor, heart, and other healthy organs. Higher DOX accumulation and tumor-to-heart drug concentration ratio, defined as the ratio of DOX delivered into the tumor vs the heart, were observed in heated tumors compared to unheated tumors in all three tested doses. The DOX uptake efficiency for each mg/kg of LTLD injected IV of heated tumor was significantly higher than that of unheated tumor and heart within the tested dose range (0.1-2.5 mg/kg). The DOX uptake for the heart linearly scaled up as a function of dose while that for the heated tumor showed some evidence of saturation at the high dose of 2.5 mg/kg.

Conclusions: These results provide guidance on clinical protocol design of hyperthermia-triggered drug delivery.

Closed-loop trans-skull ultrasound hyperthermia leads to improved drug delivery from thermosensitive drugs and promotes changes in vascular transport dynamics in brain tumors

Effective drug delivery in brain tumors remains a major challenge in oncology. Although local hyperthermia and stimuli-responsive delivery systems, such as thermosensitive liposomes, represent promising strategies to locally enhance drug delivery in solid tumors and improve outcomes, their application in intracranial malignancies remains unexplored. We hypothesized that the combined abilities of closed-loop trans-skull Magnetic Resonance Imaging guided Focused Ultrasound (MRgFUS) hyperthermia with those of thermosensitive drugs can alleviate challenges in drug delivery and improve survival in gliomas.

Methods: To conduct our investigations, we first designed a closed loop MR-guided Focused Ultrasound (MRgFUS) system for localized trans-skull hyperthermia (ΔT < 0.5 °C) in rodents and established safety thresholds in healthy mice. To assess the abilities of the developed system and proposed therapeutic strategy for FUS-triggered chemotherapy release we employed thermosensitive liposomal Dox (TSL-Dox) and tested it in two different glioma tumor models (F98 in rats and GL261 in mice). To quantify Dox delivery and changes in the transvascular transport dynamics in the tumor microenvironment we combined fluorescent microscopy, dynamic contrast enhanced MRI (DCE-MRI), and physiologically based pharmacokinetic (PBPK) modeling. Lastly, to assess the therapeutic efficacy of the system and of the proposed therapeutic strategy we performed a survival study in the GL261 glioma bearing mice.

Results: The developed closed-loop trans-skull MRgFUS-hyperthermia system that operated at 1.7 MHz, a frequency that maximized the brain (FUS-focus) to skull temperature ratio in mice, was able to attain and maintain the desired focal temperature within a narrow range. Histological evidence (H&E and Nissl) suggests that focal temperature at 41.5 ± 0.5 °C for 10 min is below the threshold for tissue damage. Quantitative analysis of doxorubicin delivery from TSLs with MRgFUS-hyperthermia demonstrated 3.5-fold improvement in cellular uptake in GL261 glioma mouse tumors (p < 0.001) and 5-fold increase in delivery in F98 glioma rat tumors (p < 0.05), as compared to controls (TSL-Dox-only). Moreover, PBPK modeling of drug transport that was calibrated using the experimental data indicated that thermal stress could lead to significant improvement in the transvascular transport (2.3-fold increase in the vessel diffusion coefficient; P < 0.001), in addition to promoting targeted Dox release. Prospective experimental investigations with DCE-MRI during FUS-hyperthermia, supported these findings and provided evidence that moderate thermal stress (≈41 °C for up to 10 min) can promote acute changes in the vascular transport dynamics in the brain tumor microenvironment (K^trans value for control vs. FUS was 0.0097 and 0.0148 min^-1, respectively; p = 0.026). Crucially, survival analysis demonstrated significant improvement in the survival in the TSL-Dox-FUS group as compared to TSL-Dox-only group (p < 0.05), providing supporting evidence on the therapeutic potential of the proposed strategy.

Conclusions: Our investigations demonstrated that spatially controlled thermal stress can be attained and sustained in the mouse brain, using a trans-skull closed-loop MRgFUS system, and used to promote the effective delivery of chemotherapy in gliomas from thermosensitive drugs. This system also allowed us to conduct mechanistic investigations that resulted in the refinement of our understanding on the role of thermal stress in augmenting mass and drug transport in brain tumors. Overall, our study established a new paradigm for effective drug delivery in brain tumors based on closed-loop ultrasound-mediated thermal stress and thermosensitive drugs.

Applications of Micro/Nanotechnology in Ultrasound-based Drug Delivery and Therapy for Tumor

Ultrasound has been broadly used in biomedicine for both tumor diagnosis as well as therapy. The applications of recent developments in micro/nanotechnology promote the development of ultrasound-based biomedicine, especially in the field of ultrasound-based drug delivery and tumor therapy. Ultrasound can activate nano-sized drug delivery systems by different mechanisms for ultrasound- triggered on-demand drug release targeted only at the tumor sites. Ultrasound Targeted Microbubble Destruction (UTMD) technology can not only increase the permeability of vasculature and cell membrane via sonoporation effect but also achieve in situ conversion of microbubbles into nanoparticles to promote cellular uptake and therapeutic efficacy. Furthermore, High Intensity Focused Ultrasound (HIFU), or Sonodynamic Therapy (SDT), is considered to be one of the most promising and representative non-invasive treatment for cancer. However, their application in the treatment process is still limited due to their critical treatment efficiency issues. Fortunately, recently developed micro/nanotechnology offer an opportunity to solve these problems, thus improving the therapeutic effect of cancer. This review summarizes and discusses the recent developments in the design of micro- and nano- materials for ultrasound-based biomedicine applications.

Estimation of drug and tumor properties using novel hybrid meta-heuristic methods

One of the major drawbacks in mathematical modeling of the drug delivery in living species is application of a common value for a specific property such as diffusion coefficient of drug in tissue, while this property is unique for each person or species. Therefore, knowledge on the species-specific values of these properties can improve the process of drug delivery and treatment. Inverse problem methods can achieve these unique properties for each specimen. Estimation of the individual-specific drug and tumor parameters requires the evaluation of the drug concentration (the concentration of medical images) within the tumor tissue. Accordingly, in this paper, first, the drug transport equation in tumor is determined. Then, the sensitivity analysis is conducted to determine the appropriate area for selecting the drug concentration to estimate the drug and tumor parameters. Finally, the parameters estimated by meta-heuristic and hybrid meta-heuristic methods are compared. To enhance the validity of the methods, two different drug transport models are examined. The results indicate that the hybrid methods gave rise to more precise estimations, especially the hybrid particle swarm optimization (PSO) method with whale optimization algorithm (WOA) which offer more appropriate responses in the parameters estimation of two models.

Numerical modeling of high-intensity focused ultrasound-mediated intraperitoneal delivery of thermosensitive liposomal doxorubicin for cancer chemotherapy

Although intraperitoneal chemotherapy (IPC) has been suggested as a promising method for the management of peritoneal dissemination (PD) of ovarian or colorectal cancers, the actual clinical use of this method has been restricted due to such problems as poor drug penetration into the tumor and high side effects. It is, therefore, necessary to develop new strategies to improve the efficacy of this approach. In the present work, a new strategy is proposed based on intraperitoneal (IP) injection of thermosensitive liposomal doxorubicin (TSL-Dox) with triggered release by mild hyperthermia induced by high intensity focused ultrasound (HIFU). A computational model is developed to evaluate the proposed drug delivery system. Results show an order of magnitude increase in drug penetration depth into the tumor compared to the conventional IP delivery. Furthermore, the effects of thermal conditions applied to the tumor, TSL size, tumor vessel permeability, and tumor size are investigated. Results indicate an improved efficiency of the drug delivery by expanding the heated region, yet, it increases the risk of unintentional TSL drug load release in the peritoneal cavity. Results also indicate that smaller TSLs have better treatment outcome. However, there is a significant reduction in treatment efficacy for TSLs with sizes smaller than the vessel wall pore size. Thus, tuning the size of TSL should be based on the tumor microvascular permeability. The simulation results suggest that the TSL-Dox delivery system in smaller tumors is far advantageous than larger ones. Results of our model can be used as guidelines for future preclinical studies.

Effects of Focused-Ultrasound-and-Microbubble-Induced Blood-Brain Barrier Disruption on Drug Transport under Liposome-Mediated Delivery in Brain Tumour: A Pilot Numerical Simulation Study

Focused ultrasound (FUS) coupled with microbubbles (MB) has been found to be a promising approach to disrupt the blood-brain barrier (BBB). However, how this disruption affects drug transport remains unclear. In this study, drug transport in combination therapy of liposomes and FUS-MB-induced BBB disruption (BBBD) was investigated based on a multiphysics model. A realistic 3D brain tumour model extracted from MR images was applied. The results demonstrated the advantage of liposomes compared to free doxorubicin injection in further improving treatment when the BBB is opened under the same delivery conditions using burst sonication. This improvement was mainly due to the BBBD-enhanced transvascular transport of free doxorubicin and the sustainable supply of the drug by long-circulating liposomes. Treatment efficacy can be improved in different ways. Disrupting the BBB simultaneously with liposome bolus injection enables more free drug molecules to cross the vessel wall, while prolonging the BBBD duration could accelerate liposome transvascular transport for more effective drug release. However, the drug release rate needs to be well controlled to balance the trade-off among drug release, transvascular exchange and elimination. The results obtained in this study could provide suggestions for the future optimisation of this FUS-MB–liposome combination therapy against brain cancer.

Simulation-based design and characterization of a microwave applicator for MR-guided hyperthermia experimental studies in small animals

Purpose

The objective of this study was to design and characterize a 2.45 GHz microwave hyperthermia applicator for delivering hyperthermia in experimental small animals to 2 - 4 mm diameter targets located 1 - 3 mm from the skin surface, with minimal heating of the surrounding tissue, under 14.1 T MRI real-time monitoring and feedback control.

Materials and methods

An experimentally validated 3D computational model was employed to design and characterize a non-invasive directional water-cooled microwave hyperthermia applicator. We assessed the effects of: reflector geometry, monopole shape, cooling water temperature, and flow rate on spatial-temperature profiles. The system was integrated with real-time MR thermometry and feedback control to monitor and maintain temperature elevations in the range of 4 - 5 °C at 1 - 3 mm from the applicator surface. The quality of heating was quantified by determining the fraction of the target volume heated to the desired temperature, and the extent of heating in non-targeted regions.

Results

Model-predicted hyperthermic profiles were in good agreement with experimental measurements (Dice Similarity Coefficient of 0.95 - 0.99). Among the four considered criteria, a reflector aperture angle of 120 °, S-shaped monopole antenna with 0.6 mm displacement, and coolant flow rate of 150 ml/min were selected as the end result of the applicator design. The temperature of circulating water and input power were identified as free variables, allowing considerable flexibility in heating target sizes within varying distances from the applicator surface. 2 - 4 mm diameter targets positioned 1 - 3 mm from the applicator surface were heated to hyperthermic temperatures, with target coverage ratio ranging between 76 - 93 % and 11 - 26 % of non-targeted tissue heated.

Conclusion

We have designed an experimental platform for MR-guided hyperthermia, incorporating a microwave applicator integrated with temperature-based feedback control to heat deep-seated targets for experimental studies in small animals.

Emerging hyperthermia applications for pediatric oncology

Local application of hyperthermia has a myriad of effects on the tumor microenvironment as well as the host's immune system. Ablative hyperthermia (typically > 55 °C) has been used both as monotherapy and adjuvant therapy, while mild hyperthermia treatment (39-45 °C) demonstrated efficacy as an adjuvant therapy through enhancement of both chemotherapy and radiation therapy. Clinical integration of hyperthermia has especially great potential in pediatric oncology, where current chemotherapy regimens have reached maximum tolerability and the young age of patients implies significant risks of late effects related to therapy. Furthermore, activation of both local and systemic immune response by hyperthermia suggests that hyperthermia treatments could be used to enhance the anticancer effects of immunotherapy. This review summarizes the state of current applications of hyperthermia in pediatric oncology and discusses the use of hyperthermia in the context of other available treatments and promising pre-clinical research.

Thermosensitive Liposome-Mediated Drug Delivery in Chemotherapy: Mathematical Modelling for Spatio-temporal Drug Distribution and Model-Based Optimisation

Thermosensitive liposome-mediated drug delivery has shown promising results in terms of improved therapeutic efficacy and reduced side effects compared to conventional chemotherapeutics. In order to facilitate our understanding of the transport mechanisms and their complex interplays in the drug delivery process, computational models have been developed to simulate the multiple steps involved in liposomal drug delivery to solid tumours. In this study we employ a multicompartmental model for drug-loaded thermosensitive liposomes, with an aim to identify the key transport parameters in determining therapeutic dosing and outcomes. The computational model allows us to not only examine the temporal and spatial variations of drug concentrations in the different compartments by utilising the tumour cord concept, but also assess the therapeutic efficacy and toxicity. In addition, the influences of key factors on systemic plasma concentration and intracellular concentration of the active drug are investigated; these include different chemotherapy drugs, release rate constants and heating duration. Our results show complex relationships between these factors and the predicted therapeutic outcome, making it difficult to identify the "best" parameter set. To overcome this challenge, a model-based optimisation method is proposed in an attempt to find a set of release rate constants and heating duration that can maximise intracellular drug concentration while minimising systemic drug concentration. Optimisation results reveal that under the operating conditions and ranges examined, the best outcome would be achieved with a low drug release rate at physiological temperature, combined with a moderate to high release rate at mild hyperthermia and 1 h heating after injection.

In vitro Measurement of Release Kinetics of Temperature Sensitive Liposomes with a Fluorescence Imaging System

Temperature sensitive liposomes (TSL) are a promising type of nanoparticles for localized drug delivery. TSL typically release the contained drug at mild hyperthermic temperatures (40-42 °C). Combined with localized hyperthermia, this allows for local drug delivery. In vitro characterization of TSL involves measurements of drug release at varying temperatures, but current methods are inadequate due to low temporal resolution of ~8 - 10 seconds. We present a novel method for measuring the drug release with sub-second temporal resolution. In the proposed system, the TSL entrapping the fluorescent drug (Doxorubicin) are pumped through a capillary tube. The tube is rapidly heated to a desired temperature via Peltier element. Since fluorescence increases as drug is released from TSL, drug release kinetics can be measured via fluorescent imaging. By fitting exponential models, we calculated the time constants of drug release at temperatures of 39.5, 40.5 and 41.5.C were about 6.09, 2.06 and 1.03 seconds, respectively. Our initial tests show that the developed system can measure TSL release at subsecond resolution, and thus allow adequate in vitro evaluation of TSL formulations.

Challenges and pitfalls in the development of liposomal delivery systems for cancer therapy

Despite considerable advances in the application of liposomal drug delivery systems in cancer treatment, the clinical application of liposomal formulations has been limited by many factors. It seems that there is a wide gap between results of experimental studies and clinical application of liposomes. In this review, we discuss barriers which limit the translation of liposomal delivery systems in cancer therapy. The main focus of this review will be on differences between preclinical and clinical studies and potential approaches to overcome the main pitfalls in the clinical application of liposomal delivery systems.

Thermosensitive Liposomes for Image-Guided Drug Delivery

Liposomes have been employed as cancer therapy clinically since the 1990s, with the primary benefit of reduced toxicity but no appreciable efficacy improvement. Thermosensitive liposomes (TSLs) are specifically formulated such that they release the encapsulated drug when exposed to hyperthermic temperatures in the fever range (~40-42°C) and have been investigated as cancer therapy for several decades, with first clinical trials initiated in the last decade. Combined with localized hyperthermia, TSLs allow precise drug delivery to a targeted region. Typically, the targeted tissue is exposed to localized hyperthermia facilitated by an image-guided hyperthermia device. Thus, TSLs enable image-guided drug delivery where drug is delivered to a tissue region identified by medical imaging. Recent TSL formulations are based on the more recent paradigm of intravascular triggered release, where drug is released rapidly (within seconds) while TSLs pass through the vasculature of the heated tissue region. The drug released within the blood then extravasates and is taken up by cancer cells. These TSLs enable up to 20-30 times higher tumor drug uptake compared to infusion of unencapsulated drug, and the dose locally delivered to the heated region can be modulated based on heating duration. This chapter reviews various TSL formulations, the different anticancer agents that have been encapsulated, as well as targeted cancer types. Further, the various hyperthermia devices that have been used for image-guided hyperthermia are reviewed, focusing on those that have been employed in human patients.

Multifunctional Nanodroplets Encapsulating Naphthalocyanine and Perfluorohexane for Bimodal Image-Guided Therapy

Although nanocarriers containing perfluorocarbon (PFC) have been widely investigated as an ultrasound (US) imaging agent and a high intensity focused ultrasound (HIFU) agent, these carriers have suffered from low stability and biocompatibility limiting their further biomedical applications. Here, we developed surface cross-linked polymer nanodroplets as a HIFU therapeutic agent guided by bimodal photoacoustic (PA) and US imaging. Pluronic F127 was reacted with 4-nitrophenyl chloroformate (NPC) and mixed with naphthalocyanine (Nc) in dichloromethane, which was added into the aqueous solution of amine-functionalized six-arm-branched poly(ethylene glycol) (PEG) to form an oil-in-water emulsion for the cross-linking reaction between the terminal NPC of Pluronic F127 and the primary amine of six-arm PEG. The resulting solution was sonicated with liquid perfluorohexane (PFH) to prepare PEG cross-linked Pluronic F127 nanoparticles encapsulating Nc and PFH (Nc/PFH@PCPN). Nc/PFH@PCPN appeared to be stable without any coalescence or vaporization in the physiological condition. Upon the application of HIFU, Nc/PFH@PCPN was vaporized and showed increased US intensity for 180 min. The Nc dye in the nanodroplets enabled the stable encapsulation of PFH and the bimodal US/PA imaging. In vivo PA/US image-guided HIFU ablation therapy confirmed that the nanodroplets increased the cavitation effect, induced necrosis and apoptosis of tumor cells, and reduced tumor growth significantly for 12 days. Taken together, the multifunctional Nc/PFH@PCPN was successfully developed as a new platform for PA/US image-guided HIFU therapy.

Tumor-specific delivery of gemcitabine with activatable liposomes

Gemcitabine delivery to pancreatic ductal adenocarcinoma is limited by poor pharmacokinetics, dense fibrosis and hypo-vascularization. Activatable liposomes, with drug release resulting from local heating, enhance serum stability and circulation, and the released drug retains the ability to diffuse within the tumor. A limitation of liposomal gemcitabine has been the low loading efficiency. To address this limitation, we used the superior solubilizing potential of copper (II) gluconate to form a complex with gemcitabine at copper:gemcitabine (1:4). Thermosensitive liposomes composed of DPPC:DSPC:DSPE-PEG2k (80:15:5, mole%) then reached 12 wt% loading, 4-fold greater than previously reported values. Cryo transmission electron microscopy confirmed the presence of a liquid crystalline gemcitabine‑copper mixture. The optimized gemcitabine liposomes released 60% and 80% of the gemcitabine within 1 and 5 min, respectively, at 42 °C. Liposomal encapsulation resulted in a circulation half-life of ~2 h in vivo (compared to reported circulation of 16 min for free gemcitabine in mice), and free drug was not detected within the plasma. The resulting gemcitabine liposomes were efficacious against both murine breast cancer and pancreatic cancer in vitro. Three repeated treatments of activatable gemcitabine liposomes plus ultrasound hyperthermia regressed or eliminated tumors in the neu deletion model of murine breast cancer with limited toxicity, enhancing survival when compared to treatment with gemcitabine alone. With 5% of the free gemcitabine dose (5 rather than 100 mg/kg), tumor growth was suppressed to the same degree as gemcitabine. Additionally, in a more aggressive tumor model of murine pancreatic cancer, liposomal gemcitabine combined with local hyperthermia induced cell death and regions of apoptosis and necrosis.

Focused Ultrasound Hyperthermia for Targeted Drug Release from Thermosensitive Liposomes: Results from a Phase I Trial

Purpose To demonstrate the feasibility and safety of using focused ultrasound planning models to determine the treatment parameters needed to deliver volumetric mild hyperthermia for targeted drug delivery without real-time thermometry. Materials and Methods This study was part of the Targeted Doxorubicin, or TARDOX, phase I prospective trial of focused ultrasound-mediated, hyperthermia-triggered drug delivery to solid liver tumors ( ClinicalTrials.gov identifier NCT02181075). Ten participants (age range, 49-68 years; average age, 60 years; four women) were treated from March 2015 to March 2017 by using a clinically approved focused ultrasound system to release doxorubicin from lyso-thermosensitive liposomes. Ultrasonic heating of target tumors (treated volume: 11-73 cm³ [mean ± standard deviation, 50 cm³ ± 26]) was monitored in six participants by using a minimally invasive temperature sensor; four participants were treated without real-time thermometry. For all participants, CT images were used with a patient-specific hyperthermia model to define focused ultrasound treatment plans. Feasibility was assessed by comparing model-prescribed focused ultrasound powers to those implemented for treatment. Safety was assessed by evaluating MR images and biopsy specimens for evidence of thermal ablation and monitoring adverse events. Results The mean difference between predicted and implemented treatment powers was -0.1 W ± 17.7 (n = 10). No evidence of focused ultrasound-related adverse effects, including thermal ablation, was found. Conclusion In this 10-participant study, the authors confirmed the feasibility of using focused ultrasound-mediated hyperthermia planning models to define treatment parameters that safely enabled targeted, noninvasive drug delivery to liver tumors while monitored with B-mode guidance and without real-time thermometry. Published under a CC BY 4.0 license. Online supplemental material is available for this article. See also the editorial by Dickey and Levi-Polyachenko in this issue.

Longer heating duration increases localized doxorubicin deposition and therapeutic index in Vx2 tumors using MR-HIFU mild hyperthermia and thermosensitive liposomal doxorubicin

Thermosensitive liposomal doxorubicin (LTSL-Dox) combined with mild hyperthermia enhances the localized delivery of doxorubicin (Dox) within a heated region. The optimal heating duration and the impact of extended heating on systemic drug distribution are unknown. Here we evaluated local and systemic Dox delivery with two different mild hyperthermia durations (42 °C for 10 or 40 minutes) in a Vx2 rabbit tumor model. We hypothesized that longer duration of hyperthermia would increase Dox concentration in heated tumors without increasing systemic exposure. Temporally and spatially accurate controlled hyperthermia was achieved using a clinical MR-HIFU system for the prescribed heating durations. Forty-minutes of heating resulted in a nearly 6-fold increase in doxorubicin concentration in heated vs unheated tumors in the same animals. Therapeutic ratio, defined as the ratio of Dox delivered into the heated tumor vs the heart, increased from 1.9-fold with 10 minutes heating to 4.4-fold with 40 minutes heating. MR-HIFU can be used to guide, deliver and monitor mild hyperthermia of a Vx2 tumor model in a rabbit model, and an increased duration of heating leads to higher Dox deposition from LTSL-Dox in a target tumor without a concomitant increase in systemic exposure. Results from this preclinical study can be used to help establish clinical treatment protocols for hyperthermia mediated drug delivery.

Mathematical modelling of liposomal drug release to tumour

The primary aim of liposomal drug delivery is to wisely modulate the drug delivery system in order to target diseased tissues. Temperature-sensitive liposomes function as a prospective weapon to combat toxic side effects corresponding to direct infusion of anticancer drugs. The main objective of the present study is to model liposomal drug release, subsequent drug transport in solid tumour along with integrated actions of tumour cell surface and endosomal events. Generalized mathematical model for liposomal drug delivery is proposed in which vital physical phenomena, such as kinetics of liposome-encapsulated drug, free drug release from liposomes, transport of both liposomal drug and free drug into the tumour compartment, plasma clearance, protein-drug interactions, drug-tumour cell receptor interactions, internalization of drug through endocytosis along with corresponding endosomal events. The model is expressed through a system of coupled partial differential equations along with appropriate set of initial, interface and boundary conditions which is solved numerically. Simulated results are compared with respective existing experimental data to demonstrate the potency and reliability of the proposed model. Graphical representations of time variant concentration profiles are illustrated to understand the underlying phenomena in details. Moreover, the model speaks for the sensitivity of important drug kinetic parameters, such as advection coefficients, drug release coefficient, plasma clearance rate and internalization parameters through graphical portrayals. The proposed model and the simulated results act as a tool in designing a more effective drug delivery system for cancerous tumours.

Ultrasound Doppler as an Imaging Modality for Selection of Murine 4T1 Breast Tumors for Combination Radiofrequency Hyperthermia and Chemotherapy

Noninvasive radiofrequency-induced (RF) hyperthermia has been shown to increase the perfusion of chemotherapeutics and nanomaterials through cancer tissue in ectopic and orthotopic murine tumor models. Additionally, mild hyperthermia (37°C-45°C) has previously shown a synergistic anticancer effect when used with standard-of-care chemotherapeutics such as gemcitabine and Abraxane. However, RF hyperthermia treatment schedules remain unoptimized, and the mechanisms of action of hyperthermia and how they change when treating various tumor phenotypes are poorly understood. Therefore, pretreatment screening of tumor phenotypes to identify key tumors that are predicted to respond more favorably to hyperthermia will provide useful mechanistic data and may improve therapeutic outcomes. Herein, we identify key biophysical tumor characteristics in order to predict the outcome of combinational RF and chemotherapy treatment. We demonstrate that ultrasound imaging using Doppler mode can be utilized to predict the response of combinational RF and chemotherapeutic therapy in a murine 4T1 breast cancer model.

Computational modelling of drug delivery to solid tumour: Understanding the interplay between chemotherapeutics and biological system for optimised delivery systems

Drug delivery to solid tumour involves multiple physiological, biochemical and biophysical processes taking place across a wide range of length and time scales. The therapeutic efficacy of anticancer drugs is influenced by the complex interplays among the intrinsic properties of tumours, biophysical aspects of drug transport and cellular uptake. Mathematical and computational modelling allows for a well-controlled study on the individual and combined effects of a wide range of parameters on drug transport and therapeutic efficacy, which would not be possible or economically viable through experimental means. A wide spectrum of mathematical models has been developed for the simulation of drug transport and delivery in solid tumours, including PK/PD-based compartmental models, microscopic and macroscopic transport models, and molecular dynamics drug loading and release models. These models have been used as a tool to identify the limiting factors and for optimal design of efficient drug delivery systems. This article gives an overview of the currently available computational models for drug transport in solid tumours, together with their applications to novel drug delivery systems, such as nanoparticle-mediated drug delivery and convection-enhanced delivery.

Mechanical fractionation of tissues using microsecond-long HIFU pulses on a clinical MR-HIFU system

PURPOSE

High intensity focussed ultrasound (HIFU) can non-invasively treat tumours with minimal or no damage to intervening tissues. While continuous-wave HIFU thermally ablates target tissue, the effect of hundreds of microsecond-long pulsed sonications is examined in this work. The objective of this study was to characterise sonication parameter-dependent thermomechanical bioeffects to provide the foundation for future preclinical studies and facilitate clinical translation.

METHODS AND MATERIALS

Acoustic power, number of cycles/pulse, sonication time and pulse repetition frequency (PRF) were varied on a clinical magnetic resonance imaging (MRI)-guided HIFU (MR-HIFU) system. Ex vivo porcine liver, kidney and cardiac muscle tissue samples were sonicated (3 × 3 grid pattern, 1 mm spacing). Temperature, thermal dose and T2 relaxation times were quantified using MRI. Lesions were histologically analysed using H&E and vimentin stains for lesion structure and viability.

RESULTS

Thermomechanical HIFU bioeffects produced distinct types of fractionated tissue lesions: solid/thermal, paste-like and vacuolated. Sonications at 20 or 60 Hz PRF generated substantial tissue damage beyond the focal region, with reduced viability on vimentin staining, whereas H&E staining indicated intact tissue. Same sonication parameters produced dissimilar lesions in different tissue types, while significant differences in temperature, thermal dose and T2 were observed between the parameter sets.

CONCLUSION

Clinical MR-HIFU system was utilised to generate distinct types of lesions and to produce targeted thermomechanical bioeffects in ex vivo tissues. The results guide HIFU research on thermomechanical tissue bioeffects, inform future studies and advice sonication parameter selection for direct tumour ablation or immunomodulation using a clinical MR-HIFU system.

Organ-based drug delivery

The phenomenal advances in pharmaceutical sciences over the last few decades have led to the development of new therapeutics like peptides, proteins, RNAs, DNAs and highly potent small molecules. Fruitful applications of these therapeutics have been challenged by several anatomical and physiological barriers that limit adequate drug disposition at the site-of-action and by off-target drug distribution to undesired tissues, which together result in the reduced effectiveness and increased side effects of therapeutic agents. As such, the development of drug delivery and targeting systems has been recognised as a cornerstone for future drug development. Research in pharmaceutical sciences is now devoted to tackling delivery challenges through engineering delivery systems that move beyond conventional dosage forms and regimens into state-of-the-art targeted drug delivery tailored toward specific therapeutic needs. Modern drug delivery systems comprise passive and active targeting approaches. While passive targeting relies on the natural course of distribution of drugs or drug carriers in the body, as governed by their physicochemical properties, active targeting often exploits targeting moieties that home preferentially into target tissues. Here, we provide an overview of theories of and approaches to passive and active drug delivery. As the design of drug delivery is dependent on the unique structure of target tissues and organs, we present our discussion in an organ-specific manner with the aim to inspire the development of new strategies for curing disease with high accuracy and efficiency.

Development and evaluation of an isolated limb infusion model for investigation of drug delivery kinetics to solid tumors by thermosensitive liposomes and hyperthermia

The combined administration of thermosensitive liposomes (TSLs) and hyperthermia (HT) has been increasingly shown to be a powerful tool for the treatment of solid tumors. At present, it is hypothesized that the circulation of TSLs through the vasculature of a heated tumor results in the rapid release of the entrapped drug, followed by its uptake and distribution within the tumor microenvironment. However, simple questions on the transport kinetics of TSLs through the heated tumor and how much drug is retained upon passage of TSLs through the tumor microcirculation have not been investigated in an experimental setting to-date. The present work describes a novel methodology for investigating these parameters by isolated limb infusion (ILI), developed in a rat model of sarcoma. This approach was used to assess the efficacy of Doxorubicin (Dox) delivery by TSL in a heated (42°C) tumor following a single passage of TSL through the tumor vasculature. Analysis of the effluent post-ILI, whole-tumor histological sections, and tissue homogenates revealed that upon a single passage, Dox delivery by TSL at 42°C did not exceed delivery under conventional (i.e. free Dox) or physiological (i.e. TSL at 37°C, or normothermia; NT) conditions. In fact, mathematical modeling demonstrated that at least thirteen passages are required to obtain the intratumoral Dox levels typically achieved using TSL (i.e. ~5%ID/g). Overall, this work investigates TSL-based determinants for achieving efficacious drug delivery using a model of ILI in tumor-bearing rats and the results bear important implications for TSL disposition in vivo.

Lyso-thermosensitive liposomal doxorubicin for treatment of bladder cancer

PURPOSE

To evaluate lyso-thermosensitive liposomal doxorubicin (LTLD, ThermoDox®) in combination with loco-regional mild hyperthermia (HT) for targeted drug delivery to the bladder wall and potential treatment of bladder cancer.

MATERIAL AND METHODS

Porcine in vivo studies were performed with the following groups: (i) intravenous (IV) LTLD with hyperthermia (LTLD + HT); (ii) IV doxorubicin (DOX) with hyperthermia (IV DOX + HT) and (iii) IV LTLD without hyperthermia (LTLD - HT). Drug formulations were delivered via 30 min IV infusion coinciding with 1-h bladder irrigation (45 °C water for HT groups, 37 °C for non-HT group), followed by immediate bladder resection. DOX concentrations were measured in consecutive sections parallel to the bladder lumen by liquid chromatography following drug extraction. Computer models were developed to simulate tissue heating and drug release from LTLD.

RESULTS

Comparing mean DOX concentrations at increasing depths from the lumen to outer surface of the bladder wall, the ranges for LTLD + HT, IV DOX + HT and LTLD - HT, respectively, were 20.32-3.52 μg/g, 2.34-0.61 μg/g and 2.18-0.51 μg/g. The average DOX concentrations in the urothelium/lamina and muscularis, respectively, were 9.7 ± 0.67 and 4.09 ± 0.81 μg/g for IV LTLD + HT, 1.2 ± 0.39 and 0.86 ± 0.24 μg/g for IV DOX + HT, and 1.15 ± 0.38 and 0.62 ± 0.15 μg/g for LTLD - HT. Computational model results were similar to measured DOX levels and suggest adequate temperatures were reached within the bladder wall for drug release from LTLD.

CONCLUSIONS

Doxorubicin accumulation and distribution within the bladder wall was achieved at concentrations higher than with free IV doxorubicin by mild bladder hyperthermia combined with systemic delivery of LTLD.

Enhanced blood brain barrier permeability and glioblastoma cell targeting via thermoresponsive lipid nanoparticles

Thermoresponsive targeting is used to deliver therapeutic agents at hyperthermic conditions (39-45 °C). However, available thermoresponsive drug delivery systems (TDDS), including liposomes, have a complex method of preparation involving toxic solvents and reagents. The objective of this in vitro study was to prepare and characterize thermoresponsive lipid nanoparticles (TLN) for treating glioblastoma, the most aggressive brain tumor whose treatment is limited by a low blood brain barrier (BBB) permeability of drugs. Thermoresponsive lipids were prepared by mixing liquid and solid fatty acids (0.1 : 1 to 2 : 1 ratio) and lipid mixtures exhibiting a solid-liquid phase transition at 39 °C were identified by plotting melting point against liquid contents. TLN were prepared by a hot melt encapsulation method using mono- or double-surfactant systems. TLN showed desirable size (<270 nm), zeta potential (-35 to -50 mV), spherical morphology and stability by FTIR studies. In the drug release studies, paclitaxel release was slow at 37 °C, however, it was released abruptly at 39 °C due to the faster diffusion rate from liquid state nanoparticles. During cytotoxicity studies, the unloaded TLN were non-toxic whereas paclitaxel loaded TLN showed higher cytotoxicity to glioblastoma cells at 39 °C (69% cell viability after one hour) compared to 37 °C (82% cell viability). The TLN showed higher permeability across an in vitro model of BBB at 39 °C due to a deformable liquid state which can squeeze through the tight junctions of the BBB. In conclusion, this study demonstrated that the TLN can be used as a safe and effective alternative to traditional TDDS with higher potential to target glioblastoma cells across the BBB.