Chitosan: a unique polysaccharide for drug delivery

Gelation and large thermoresponse of cranberry-based xyloglucan

Cranberry waste contains potentially valuable components, such as proanthocyanidins, flavanols, and xyloglucan. Highly-purified xyloglucan (XG) from cranberries were studied through steady and oscillatory shear rheology at various concentrations and temperatures. At room temperature, an apparent yield stress is observed and the storage modulus exceeds the loss modulus ( [Formula: see text] ) for concentrations of 0.5 wt% and higher, indicating that the XG solution has formed a physical hydrogel. Thermoresponsive gelation is observed with a five-order of magnitude increase in shear moduli as it undergoes a weak to strong gel transition around 52 °C. The gelation time was 5 min with an observed storage moduli up to 3500 Pa. Cranberry-based XG exhibits thermoresponsive behavior at concentrations as low as 0.1 wt% (w/v), which is significantly lower than prior gelation studies of XG from other sources. The formation of a weak gel at room temperature and large storage moduli observed at room temperature is likely associated with the low level of impurities and small amount of galactose present in the XG chains.

P-gp inhibition and enhanced oral bioavailability of amikacin Sulfate: A novel approach using Thiolated Chito-PEGylated Lipidic Hybrids

This study aimed to develop oral lipidic hybrids of amikacin sulfate (AMK), incorporating thiolated chitosan as a P-glycoprotein (P-gp) inhibitor to enhance intestinal absorptivity and bioavailability. Three formulations were designed: PEGylated Liposomes, Chitosan-functionalized PEGylated (Chito-PEGylated) Lipidic Hybrids, and Thiolated Chito-PEGylated Lipidic Hybrids. The physical characteristics of nanovesicles were assessed. Ex-vivo permeation and confocal laser scanning microscopy (CLSM) studies were conducted to evaluate the formulations' potential to enhance AMK intestinal permeability. In-vivo pharmacokinetic studies in rats and histological/biochemical investigations assessed the safety profile and oral bioavailability. The AMK-loaded Thiolated Chito-PEGylated Lipidic Hybrids exhibited favorable physical characteristics, higher ex-vivo permeation parameters, and verified P-gp inhibition via CLSM. They demonstrated heightened oral bioavailability (68.62% absolute bioavailability) and a sufficient safety profile. Relative bioavailability was significantly higher (1556.3% and 448.79%) compared to PEGylated Liposomes and Chito-PEGylated Lipidic Hybrids, respectively, indicating remarkable oral AMK delivery with fewer doses, reduced side effects, and enhanced patient compliance.

Mucoadhesive chitosan-catechol as an efficient vaccine delivery system for intranasal immunization

The mucosal barrier and scavenging effect of the mucosal layer are two main obstacles in inducing mucosal immunization. To overcome these obstacles, we synthesized a bio-inspired mucoadhesive material, chitosan-catechol (ChiC), for surface modification of inactive porcine epidemic diarrhea virus (PEDV). Studies have revealed that PEDV particles can be facilely and mildly modified by Chi-C forming Chi-C-PEDV nanoparticles (Chic-Ps) through the covalent and electrostatic bond, which effectively prolongs the retention time of PEDV in the nasal mucosa. The cell co-culture model demonstrated that Chic-Ps exhibit enhanced recruitment of dendritic cells via the secretion of stimulating chemokine CCL20 and improving antigen permeability by disruption the distribution of ZO-1 protein in epithelial cells. Additionally, the flow cytometry (FCM) analysis revealed that Chic-Ps facilitate trafficking to lymph nodes and induce stronger cellular and humoral immune responses compared to unmodified PEDV. Notably, Chic-Ps induced a higher level of PEDV neutralizing antibody was induced by Chic-Ps in the nasal washes, as confirmed by a plaque reduction neutralization test. These results demonstrate that Chi-C is a promising nasal delivery system for vaccines. Proof of principle was obtained for inactivated PEDV, but similar delivery mechanisms could be applied in other vaccines when intranasal administration is needed.

Ziziphora clinopodioides extract-loaded chitosan/polyvinylpyrrolidone casting films for potential applications in wound dressings

Chitosan/polyvinylpyrrolidone composite films containing hydroalcoholic Ziziphora clinopodioides extract were developed and evaluated for their potential use as wound dressings. The physical and chemical properties of the films were extensively explored, including swelling capacity, mechanical properties, antimicrobial activity, and microstructural characteristics. The results showed that the addition of Ziziphora extract significantly increased the swelling capacity of the films by 561.24% to 1175% (p < 0.05). While tensile strength and Young's modulus were enhanced, elongation at the breaking point decreased with increasing volume percentages of Ziziphora extract. Variance analysis indicated no statistically significant effect on the tensile properties of the films with varying Ziziphora extract content (p < 0.05). Furthermore, films incorporated with Ziziphora extract demonstrated antimicrobial properties. Scanning electron microscopy (SEM) analysis revealed that samples lacking Ziziphora extract had a smooth surface, while those containing the extract displayed a rough texture that may potentially accelerate the wound healing process.

Enhancing immune response, antioxidant capacity, and gut health in growing beagles through a chitooligosaccharide diet

Chitooligosaccharides (COS) have attracted significant attention due to their unique biological activities, water solubility, and absorbable properties. The objective of the present study was to investigate the impact of COS-supplemented diets on the immune response, antioxidative capacity, hematology, serum biochemistry, and modulation of intestinal microbiota in growing beagles. Twelve weaning male beagles (6 weeks old; weighing 3.6 ± 0.6 kg) were fed either a control diet (food without COS, n = 6) or a COS-supplemented diet (n = 6) twice daily for 7 weeks. Blood samples collected at weeks 4 and 7 indicated that hematology and serum biochemistry remained unaffected by COS supplementation. Compared with the control group, the test group showed higher levels of serum antibodies against the canine distemper virus and parvovirus, higher levels of immunoglobulin A, G, and M, and increased activities of superoxide dismutase, glutathione peroxidase, and catalase. In addition, COS was observed to modulate the intestinal flora by enhancing the presence of probiotics, such as Muribaculaceae, Prevotellaceae_Ga6A1_group, Lactobacillus, Collinsella, Blautia, and Lachnospiraceae_NK4A136_group. In summary, a COS-supplemented diet could effectively improve dog health by regulating immune function and antioxidant responses and modulating intestinal microbiota. This study highlights the potentiality of using COS as a valuable nutraceutical for growing dogs.

Degradable Polymeric Bio(nano)materials and Their Biomedical Applications: A Comprehensive Overview and Recent Updates

Degradable polymers (both biomacromolecules and several synthetic polymers) for biomedical applications have been promising very much in the recent past due to their low cost, biocompatibility, flexibility, and minimal side effects. Here, we present an overview with updated information on natural and synthetic degradable polymers where a brief account on different polysaccharides, proteins, and synthetic polymers viz. polyesters/polyamino acids/polyanhydrides/polyphosphazenes/polyurethanes relevant to biomedical applications has been provided. The various approaches for the transformation of these polymers by physical/chemical means viz. cross-linking, as polyblends, nanocomposites/hybrid composites, interpenetrating complexes, interpolymer/polyion complexes, functionalization, polymer conjugates, and block and graft copolymers, are described. The degradation mechanism, drug loading profiles, and toxicological aspects of polymeric nanoparticles formed are also defined. Biomedical applications of these degradable polymer-based biomaterials in and as wound dressing/healing, biosensors, drug delivery systems, tissue engineering, and regenerative medicine, etc., are highlighted. In addition, the use of such nano systems to solve current drug delivery problems is briefly reviewed.

Antimicrobial and wound healing potential of naphthoquinones encapsulated in nanochitosan

Introduction: The use of chitosan in pharmaceutical formulations is an advantageous approach due to this compound intrinsic biodegradability and biocompatibility, as well as ready availability and low polymer cost. Methods: Herein, the naphthoquinones 3- chloromethylene-menadione (NQ1) and 2,3-dichloro-1,4-naphthoquinone (NQ2) were nanoencapsulated into chitosan (CNP) by the ionotropic gelatinization technique and characterized by DLS, FTIR, SEM, TGA and DSC, and their release profiles evaluated. The antimicrobial and wound healing activities were investigated. Results and Discussion: Homogeneous chitosan nanocapsulses of about 193 nm and Z potential ranging from +30.6 to +33.1 mV loaded with NQ1 (CNP-NQ1) or NQ2 (CNPQNQ2). With nanoencapsulation efficiencies of ≥ 96%, the solubility of naphthoquinones in aqueous environments was improved, making them suitable for biological system applications. The encapsulated naphthoquinones displayed a controlled release of approximately 80% for CNP-NQ1 and 90% for CNP-NQ2 over an 8 h period at 36°C. Both CNP-NQ1 and CNP-NQ2 retained the already established free naphthoquinone antimicrobial activity against two Staphylococcus aureus strains, Staphylococcus epidermidis, Streptococcus pyogenes and Pseudomonas aeruginosa. Although presenting low toxicity to healthy human cells, only CNP-NQ1 displayed therapeutic indices above 100 for S. aureus and S. epidermidis and above 27 for S. pyogenes and P. aeruginosa, allowing for safe use in human tissues. Furthermore, CNP-NQ1 did not impair the migration of human fibroblast cells in scratch assays, adding promising wound healing properties to this formulation. These findings emphasize that CNP-NQ1 may be useful in protecting injured skin tissue from bacterial contamination, avoiding skin infections not only by reducing bacterial loads but also by accelerating the healing process until complete dermal tissue recovery.

Microbubble-assisted ultrasound for inner ear drug delivery

Treating pathologies of the inner ear is a major challenge. To date, a wide range of procedures exists for administering therapeutic agents to the inner ear, with varying degrees of success. The key is to deliver therapeutics in a way that is minimally invasive, effective, long-lasting, and without adverse effects on vestibular and cochlear function. Microbubble-assisted ultrasound ("sonoporation") is a promising new modality that can be adapted to the inner ear. Combining ultrasound technology with microbubbles in the middle ear can increase the permeability of the round window, enabling therapeutic agents to be delivered safely and effectively to the inner ear in a targeted manner. As such, sonoporation is a promising new approach to treat hearing loss and vertigo. This review summarizes all studies on the delivery of therapeutic molecules to the inner ear using sonoporation.

Chitosan-coated artesunate protects against ulcerative colitis via STAT6-mediated macrophage M2 polarization and intestinal barrier protection

Oral delivery of chitosan-coated artesunate (CPA) has been proven to be effective at preventing ulcerative colitis (UC) in mice. However, the anti-inflammatory mechanism is not fully understood. STAT6 is a key transcription factor that promotes anti-inflammatory effects by inducing M2 and Th2 dominant phenotypes, therefore we hypothesized STAT6 might play a key role in the process. To prove it, a STAT6 gene knockout macrophage cell line (STAT6-/- RAW264.7, by CRISPR/Cas9 method), and its corresponding Caco-2/RAW264.7 co-culture system combined with the STAT6 inhibitor (AS1517499, AS) in a mouse UC model were established and studied. The results showed that CPA remarkably suppressed the activation of TLR-4/NF-κB pathway and the mRNA levels of proinflammatory cytokines, while increased the IL-10 levels in RAW264.7. This effect of CPA contributed to the protection of the ZO-1 in Caco-2 which was disrupted upon the stimulation to macrophages. Simultaneously, CPA reduced the expression of CD86 but increase the expression of CD206 and p-STAT6 in LPS-stimulated RAW264.7 cells. However, above alterations were not obvious as in STAT6-/- RAW264.7 and its co-culture system, suggesting STAT6 plays a key role. Furthermore, CPA treatment significantly inhibited TLR-4/NF-κB activation, intestinal macrophage M1 polarization and mucosal barrier injury induced by DSS while promoted STAT6 phosphorylation in the UC mouse model, but this effect was also prominently counteracted by AS. Therefore, our data indicate that STAT6 is a major regulator in the balance of M1/M2 polarization, intestinal barrier integrity and then anti-colitis effects of CPA. These findings broaden our understanding of how CPA fights against UC and imply an alternative treatment strategy for UC via this pathway.

Biocompatible Chitosan Films Containing Acetic Acid Manifested Potent Antiviral Activity against Enveloped and Non-Enveloped Viruses

Chitosan films were prepared by solvent casting using an acetic acid-based solution. The films that were developed contained 15.49% of acetic acid solution (10% v/v) and showed biocompatibility in vitro in human keratinocyte HaCaT cells and potent antiviral activity against both enveloped and non-enveloped viruses. The results showed up to 99.98% and 99.92% viral inactivation against the phi 6 enveloped bacteriophage and MS2 non-enveloped bacteriophage, respectively, suggesting that this chitosan/acetic acid film is a promising material for biomedical applications that require biodegradable broad-spectrum antiviral materials.

Transferrin-modified chitosan nanoparticles for targeted nose-to-brain delivery of proteins

Nose-to-brain delivery presents a promising alternative route compared to classical blood-brain barrier passage, especially for the delivery of high molecular weight drugs. In general, macromolecules are rapidly degraded in physiological environment. Therefore, nanoparticulate systems can be used to protect biomolecules from premature degradation. Furthermore, targeting ligands on the surface of nanoparticles are able to improve bioavailability by enhancing cellular uptake due to specific binding and longer residence time. In this work, transferrin-decorated chitosan nanoparticles are used to evaluate the passage of a model protein through the nasal epithelial barrier in vitro. It was demonstrated that strain-promoted azide-alkyne cycloaddition reaction can be utilized to attach a functional group to both transferrin and chitosan enabling a rapid covalent surface-conjugation under mild reaction conditions after chitosan nanoparticle preparation. The intactness of transferrin and its binding efficiency were confirmed via SDS-PAGE and SPR measurements. Resulting transferrin-decorated nanoparticles exhibited a size of about 110-150 nm with a positive surface potential. Nanoparticles with the highest amount of surface bound targeting ligand also displayed the highest cellular uptake into a human nasal epithelial cell line (RPMI 2650). In an air-liquid interface co-culture model with glioblastoma cells (U87), transferrin-decorated nanoparticles showed a faster passage through the epithelial cell layer as well as increased cellular uptake into glioblastoma cells. These findings demonstrate the beneficial characteristics of a specific targeting ligand. With this chemical and technological formulation concept, a variety of targeting ligands can be attached to the surface after nanoparticle formation while maintaining cargo integrity.

Chitosan-Based Nanoparticles as Effective Drug Delivery Systems-A review

Chitosan-based nanoparticles (chitosan-based nanocomposites; chitosan nanoparticles; ChNPs) are promising materials that are receiving a lot of attention in the last decades. ChNPs have great potential as nanocarriers. They are able to encapsulate drugs as well as active compounds and deliver them to a specific place in the body providing a controlled release. In the article, an overview has been made of the most frequently used preparation methods, and the developed applications in medicine. The presentation of the most important information concerning ChNPs, especially chitosan's properties in drug delivery systems (DDS), as well as the method of NPs production was quoted. Additionally, the specification and classification of the NPs' morphological features determined their application together with the methods of attaching drugs to NPs. The latest scientific reports of the DDS using ChNPs administered orally, through the eye, on the skin and transdermally were taken into account.

Nanofiber Wound Dressing Materials-A Comparative Study of Wound Healing on a Porcine Model

BACKGROUND

Nanofiber wound dressings remain the domain of in vitro studies. The purpose of our study was to verify the benefits of chitosan (CTS) and polylactide (PLA)-based nanofiber wound dressings on a porcine model of a naturally contaminated standardized wound and compare them with the conventional dressings, i.e., gauze and Inadine.

MATERIAL AND METHODS

The study group included 32 pigs randomized into four homogeneous groups according to the wound dressing type. Standardized wounds were created on their backs, and wound dressings were regularly changed. We evaluated difficulty of handling individual dressing materials and macroscopic appearance of the wounds. Wound swabs were taken for bacteriological examination. Blood samples were obtained to determine blood count values and serum levels of acute phase proteins (serum amyloid A, C-reactive protein, and haptoglobin). The crucial point of the study was histological analysis. Microscopic evaluation was focused on the defect depth and tissue reactions, including formation of the fibrin exudate with neutrophil granulocytes, the layer of granulation and cellular connective tissue, and the reepithelialization. Statistical analysis was performed by using SPSS software. The analysis was based on the Kruskal-Wallis H test and Mann-Whitney U test followed by Bonferroni correction. Significance was set at P < .05.

RESULTS

Macroscopic examination did not show any difference in wound healing among the groups. However, evaluation of histological findings demonstrated that PLA-based nanofiber dressing accelerated the proliferative (P = .025) and reepithelialization (P < .001) healing phases, while chitosan-based nanofiber dressing potentiated and accelerated the inflammatory phase (P = .006). No statistically significant changes were observed in the blood count or acute inflammatory phase proteins during the trial. Different dynamics were noted in serum amyloid A values in the group treated with PLA-based nanofiber dressing (P = .006).

CONCLUSION

Based on the microscopic examination, we have documented a positive effect of nanofiber wound dressings on acceleration of individual phases of the healing process. Nanofiber wound dressings have a potential to become in future part of the common wound care practice.

Recent trends using natural polymeric nanofibers as supports for enzyme immobilization and catalysis

All the disciplines of science, especially biotechnology, have given continuous attention to the area of enzyme immobilization. However, the structural support made by material science intervention determines the performance of immobilized enzymes. Studies have proven that nanostructured supports can maintain better catalytic performance and improve immobilization efficiency. The recent trends in the application of nanofibers using natural polymers for enzyme immobilization have been addressed in this review article. A comprehensive survey about the immobilization strategies and their characteristics are highlighted. The natural polymers, e.g., chitin, chitosan, silk fibroin, gelatin, cellulose, and their blends with other synthetic polymers capable of immobilizing enzymes in their 1D nanofibrous form, are discussed. The multiple applications of enzymes immobilized on nanofibers in biocatalysis, biosensors, biofuels, antifouling, regenerative medicine, biomolecule degradation, etc.; some of these are discussed in this review article.

Bio-Inspired Muco-Adhesive Polymers for Drug Delivery Applications

Muco-adhesive drug delivery systems continue to be one of the most studied for controlled pharmacokinetics and pharmacodynamics. Briefly, muco-adhesive polymers, can be described as bio-polymers that adhere to the mucosal (mucus) surface layer, for an extended residency period of time at the site of application, by the help of interfacial forces resulting in improved drug delivery. When compared to traditional drug delivery systems, muco-adhesive carriers have the potential to enhance therapeutic performance and efficacy, locally and systematically, in oral, rectal, vaginal, amongst other routes. Yet, the achieving successful muco-adhesion in a novel polymeric drug delivery solution is a complex process involving key physico-chemico-mechanical parameters such as adsorption, wettability, polymer chain length, inter-penetration and cross-linking, to list a few. Hence, and in light of accruing progress, evidence and interest, during the last decade, this review aims to provide the reader with an overview of the theories, principles, properties, and underlying mechanisms of muco-adhesive polymers for pharmaceutics; from basics to design to characterization to optimization to evaluation to market. A special focus is devoted to recent advances incorporating bio-inspired polymers for designing controlled muco-adhesive drug delivery systems.

Oral delivery of chitosan-coated PLGA nanoemulsion loaded with artesunate alleviates ulcerative colitis in mice

Artesunate (ARS) has been shown to have a protective effect on ulcerative colitis (UC) in mice. However, its lack of targeting and short half-life severely hamper its efficacy. In this study, polylactic acid-glycolic acid copolymer (PLGA) and chitosan (CS) double emulsification solvent volatilisation method was used to prepare a stable nanoemulsion loaded with ARS (CPA). The in vitro drug release profile was detected using dialysis and the potential protective effect was evaluated in an experimental ulcerative colitis (UC) model induced by oral administration of dextran sulphate sodium (DSS). The results suggested that the mean droplet diameter of CPA nanoemulsion is 409.9 ± 9.21 nm, the polydispersity index is 0.17 ± 0.01 and the zeta potential is 40.07 ± 1.65 mV. The cumulative release curve showed the ARS was mainly released at pH 7.4, which is similar to the colonic environment. Oral administration of CPA effectively relieved DSS-induced clinical symptoms by lowering the body weight loss, disease activity index (DAI) score and impressively maintained tight junction protein expression in colon tissue when compared to the blank nanoemulsion control. Meanwhile, CPA remarkably suppressed TLR4/NF-κB pathway activation and mRNA levels of proinflammatory cytokines (IL-1β, IL-6, and TNF-α) while enhanced levels of IL-10 and CD206. In addition, the effect of CPA was slightly better than that of injecting ARS. Therefore, this study demonstrates a convenient drug delivery system for oral administration of ARS that potentially helps to target colonic tissue and alleviate UC.

A new polysaccharide platform constructs self-adjuvant nanovaccines to enhance immune responses

Background

Nanovaccines have shown the promising potential in controlling and eradicating the threat of infectious diseases worldwide. There has been a great need in developing a versatile strategy to conveniently construct diverse types of nanovaccines and induce potent immune responses. To that end, it is critical for obtaining a potent self-adjuvant platform to assemble with different types of antigens into nanovaccines.

Results

In this study, we identified a new natural polysaccharide from the rhizomes of Bletilla striata (PRBS), and used this polysaccharide as a platform to construct diverse types of nanovaccines with potent self-adjuvant property. In the construction process of SARS-CoV-2 nanovaccine, PRBS molecules and RBD protein antigens were assembled into ~ 300 nm nanoparticles by hydrogen bond. For HIV nanovaccine, hydrophobic effect dominantly drove the co-assembly between PRBS molecules and Env expression plasmid into ~ 350 nm nanospheres. Importantly, PRBS can potently activate the behaviors and functions of multiple immune cells such as macrophages, B cells and dendritic cells. Depending on PRBS-mediated immune activation, these self-adjuvant nanovaccines can elicit significantly stronger antigen-specific antibody and cellular responses in vivo, in comparison with their corresponding traditional vaccine forms. Moreover, we also revealed the construction models of PRBS-based nanovaccines by analyzing multiple assembly parameters such as bond energy, bond length and interaction sites.

Conclusions

PRBS, a newly-identified natural polysaccharide which can co-assemble with different types of antigens and activate multiple critical immune cells, has presented a great potential as a versatile platform to develop potent self-adjuvant nanovaccines.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-022-01533-3.

A Synthetic Gene Library Yields a Previously Unknown Glycoside Phosphorylase That Degrades and Assembles Poly-β-1,3-GlcNAc, Completing the Suite of β-Linked GlcNAc Polysaccharides

The considerable utility of glycoside phosphorylases (GPs) has led to substantial efforts over the past two decades to expand the breadth of known GP activities. Driven largely by the increase of available genomic DNA sequence data, the gap between the number of sequences in the carbohydrate active enzyme database (CAZy DB) and its functionally characterized members continues to grow. This wealth of sequence data presented an exciting opportunity to explore the ever-expanding CAZy DB to discover new GPs with never-before-described functionalities. Utilizing an in silico sequence analysis of CAZy family GH94, we discovered and then functionally and structurally characterized the new GP β-1,3-N-acetylglucosaminide phosphorylase. This new GP was sourced from the genome of the cell-wall-less Mollicute bacterium, Acholeplasma laidlawii and was found to synthesize β-1,3-linked N-acetylglucosaminide linkages. The resulting poly-β-1,3-N-acetylglucosamine represents a new, previously undescribed biopolymer that completes the set of possible β-linked GlcNAc homopolysaccharides together with chitin (β-1,4) and PNAG (poly-β-1,6-N-acetylglucosamine). The new biopolymer was denoted acholetin, a combination of the genus Acholeplasma and the polysaccharide chitin, and the new GP was thus denoted acholetin phosphorylase (AchP). Use of the reverse phosphorolysis action of AchP provides an efficient method to enzymatically synthesize acholetin, which is a new biodegradable polymeric material.

Antibacterial and Antifungal Properties of Modified Chitosan Nonwovens

Chitosan acquires bacteriostatic properties via protonation of its amino groups. However, much of the literature assumes that chitosan itself inhibits the growth of bacteria. This article presents a comparative study of chitosan nonwovens modified with various acids, including acetic, propionic, butyric, and valeric organic acids, as well as hydrochloric acid. The aim was to determine which acid salts influence the antibacterial and antifungal activity of chitosan-based materials. Two methods were used to modify (formation of ammonium salts) the chitosan nonwovens: First, acid vapors (gassing process) were used to find which salt of chitosan had the best antibacterial properties. Based on the results, the most effective acid was prepared in a solution in ethanol. The influence of the acid concentration in ethanol, the time of treatment of chitosan materials with acid solution, and the rinsing process of modified nonwovens on the antimicrobial activity of the modified materials was investigated. The modified materials were subjected to microbiological tests. Each of the modified materials was placed in bacterial inoculum. The cultures were tested on agar to observe their microbial activity. Toxicity to human red blood cells was also investigated. A reduction in the number of bacterial cells was observed for the S. aureus strain with chitosan salt modified with 10% acetic acid in ethanol. The antibacterial activity of the chitosan salts increased with the percentage of acid salts formed on the surface of the solid material (decreasing numbers of bacterial colonies or no growth). No reduction in growth was observed for the E. coli strain. The chitosan samples were either inactive or completely eliminated the bacterial cells. Antimicrobial activity was observed for chitosan salts with hydrochloric acid and acetic acid. Finally, ¹H-NMR spectroscopy and FTIR spectroscopy were used to confirm the incorporation of the acid groups to the amino groups of chitosan.

PLGA's Plight and the Role of Stealth Surface Modification Strategies in Its Use for Intravenous Particulate Drug Delivery

Numerous human disorders can benefit from targeted, intravenous (IV) drug delivery. Polymeric nanoparticles have been designed to undergo systemic circulation and deliver their therapeutic cargo to target sites in a controlled manner. Poly(lactic-co-glycolic) acid (PLGA) is a particularly promising biomaterial for designing intravenous drug carriers due to its biocompatibility, biodegradability, and history of clinical success across other routes of administration. Despite these merits, PLGA remains markedly absent in clinically approved IV drug delivery formulations. A prominent factor in PLGA particles' inability to succeed intravenously may lie in the hydrophobic character of the polyester, leading to the adsorption of serum proteins (i.e., opsonization) and a cascade of events that end in their premature clearance from the bloodstream. PEGylation, or surface-attached polyethylene glycol chains, is a common strategy for shielding particles from opsonization. Polyethylene glycol (PEG) continues to be regarded as the ultimate "stealth" solution despite the lack of clinical progress of PEGylated PLGA carriers. This review reflects on some of the reasons for the clinical failure of PLGA, particularly the drawbacks of PEGylation, and highlights alternative surface coatings on PLGA particles. Ultimately, a new approach will be needed to harness the potential of PLGA nanoparticles and allow their widespread clinical adoption.

Penetrant-Induced Glass-like Transition in Thin Chitosan Films

We present the water vapor-induced swelling and the emergence of a penetrant-induced glass-like transition in the substrate-supported glassy chitosan thin films. The time evolution of the film thickness under different levels of relative humidity conditions is measured in real-time using a spectroscopic ellipsometer equipped with a humidity cell. In a dry film, the network of chitosan chains is in a glassy state, and upon exposure to water vapor, initially, the film swells by Fickian diffusion of water molecules, which triggers the structural relaxations of the chains. Under higher humidity conditions, a relatively slower evolution of thickness succeeds the initial rapid swelling due to the non-Fickian sorption of water molecules. The swelling characteristics of the polymer films are accounted for by considering the diffusion-relaxation mechanism of chains in the presence of smaller penetrant molecules. The penetrant-induced glass-like transition (P_g), where the polymer film isothermally transits from a glassy to a rubbery state, is determined for pristine and cross-linked chitosan films. P_g is determined from the abrupt change in the rate of swelling observed upon increasing the relative humidity. Chemical crosslinking has an evident influence on the penetrant-induced glass-like transition of the chitosan films. P_g was found to rise sharply for stiffer films with higher cross-linking density.

Chitosan-Based Biocompatible Copolymers for Thermoresponsive Drug Delivery Systems: On the Development of a Standardization System

Chitosan is a natural polysaccharide that is considered to be biocompatible, biodegradable and non-toxic. The polymer has been used in drug delivery applications for its positive charge, which allows for adhesion with and recognition of biological tissues via non-covalent interactions. In recent times, chitosan has been used for the preparation of graft copolymers with thermoresponsive polymers such as poly-N-vinylcaprolactam (PNVCL) and poly-N-isopropylamide (PNIPAM), allowing the combination of the biodegradability of the natural polymer with the ability to respond to changes in temperature. Due to the growing interest in the utilization of thermoresponsive polymers in the biological context, it is necessary to increase the knowledge of the key principles of thermoresponsivity in order to obtain comparable results between different studies or applications. In the present review, we provide an overview of the basic principles of thermoresponsivity, as well as a description of the main polysaccharides and thermoresponsive materials, with a special focus on chitosan and poly-N-Vinyl caprolactam (PNVCL) and their biomedical applications.

Terrestrial insects as a promising source of chitosan and recent developments in its application for various industries

Chitosan is a deacetylated form of chitin and increasingly important amino-polysaccharide used in many various sectors including agriculture, food, and biomedicine. However, chitosan from marine sources has several adverse effects, including allergenic components harmful to human health. Furthermore, marine resources are seasonal, and availability is limited due to dependency on environmental conditions and climate change. In addition, shell infection in crustaceans and environmental contamination make the harvesting of chitin and chitosan problematic. In recent years, chitosan from terrestrial insects has attracted considerable interest. The discoveries show insect chitosan is more advantageous compared to crustacean chitosan. In addition, we were unable to find any literature about the adverse effects of insect chitosan thus far. This review aims to reveal information regarding crustacean and terrestrial insect chitosan and recent advances in chitosan sources. Applications from specific insect orders and perspectives for further study will also be highlighted, including medical and sensing applications.

Dual Cross-Linked Chitosan/PVA Hydrogels Containing Silver Nanoparticles with Antimicrobial Properties

Stable chitosan/PVA-based hydrogels were obtained by combining covalent and physical cross-linking methods. As covalent cross-linkers, epoxy agents with different chain lengths were used, while freeze-thaw cycles were applied for additional physical cross-linking. The chemical structure of the hydrogel was examined by FTIR spectroscopy whereas the morphology was analyzed by SEM, showing well-defined pores with dimensions of around 50 μm in diameter. It was proved that gel fraction and the network morphology were deeply influenced by the synthesis conditions. Chitosan/PVA hydrogel showed a relative high swelling rate, reaching equilibrium in the first hour. The values obtained for the elastic modulus were relatively low (3-30 kPa); as a result, these hydrogels are soft and very flexible, and are ideal candidates for medical applications as wound or oral dressings. In addition, the natural antimicrobial activity of chitosan was enhanced by in situ generation of silver nanoparticles (AgNPs) under UV irradiation. The total amount of Ag from hydrogel was determined by elemental analyses and its crystalline state was confirmed by XRD. The CS/PVA hydrogels entrapped with AgNPs exhibited high inhibitory activity against S. aureus and K. pneumonia. The vitality tests confirmed the lack of cytotoxicity of CS/PVA hydrogels without and with AgNPs.

Design and Synthesis of Lactose, Galactose and Cholic Acid Related Dual Conjugated Chitosan Derivatives as Potential Anti Liver Cancer Drug Carriers

Cholic acid and galactose or lactose dual conjugated chitosan derivatives were designed and synthesized as potential anti liver cancer drug carriers, their structures were characterized through proton NMR spectra, elemental analysis, size distribution, zeta potential, and scanning electron microscope image studies. The ability of the dual conjugates to enhance the aqueous solubility of the cancer drug sorafenib was evaluated. The entrapment efficiency (EE%) and drug content (DC%) of sorafenib in the inclusion complexes were measured. The chitosan dual conjugate with cholic acid and galactose was found to be best in enhancing the aqueous solubility of sorafenib. The solubility of sorafenib in water has increased from 1.7 µg/mL to 1900 µg/mL which is equal to 1117-fold increase in its solubility due to the inclusion complex with chitosan conjugate.

Nano intervention in topical delivery of corticosteroid for psoriasis and atopic dermatitis-a systematic review

Atopic dermatitis (AD) and psoriasis are highly prevalent, complex, chronic inflammatory skin diseases that immensly affect the patient's quality of life. While there is no definitive cure for these conditions, suppressive medications aim at managing the symptoms of these diseases. The application of emollients accompanied by symptomatic anti-inflammatory therapy consisting of topical corticosteroids (TCS) is extensively employed for controlling the symptoms among general practitioners making this therapeutic class an indispensable pillar of dermatotherapeutics. The first TCS, hydrocortisone (HC) introduced in the early 1950s led to the development of different steroidal moieties of varying potencies by inducing chemical modifications to the basic steroid structure. The wide spectrum of the available range of formulations and potency provides flexibility to treat all patient groups, different phases of the diseases, and different anatomical sites. Conventional TCS therapy suffers from drawbacks such as low drug permeation and retention rate. Thus, novel nanoformulations have been developed to overcome these problems. This review provides an insight into the current state of nanocarrier-mediated topical delivery of corticosteroids monotherapy and combination therapy with special emphasis on targeting psoriasis and AD.

Chitin and chitosan on the nanoscale

In a matter of decades, nanomaterials from biomass, exemplified by nanocellulose, have rapidly transitioned from once being a subject of curiosity to an area of fervent research and development, now reaching the stages of commercialization and industrial relevance. Nanoscale chitin and chitosan, on the other hand, have only recently begun to raise interest. Attractive features such as excellent biocompatibility, antibacterial activity, immunogenicity, as well as the tuneable handles of their acetylamide (chitin) or primary amino (chitosan) functionalities indeed display promise in areas such as biomedical devices, catalysis, therapeutics, and more. Herein, we review recent progress in the fabrication and development of these bio-nanomaterials, describe in detail their properties, and discuss the initial successes in their applications. Comparisons are made to the dominant nanocelluose to highlight some of the inherent advantages that nanochitin and nanochitosan may possess in similar application.

Chitosan nanoparticles as a promising tool in nanomedicine with particular emphasis on oncological treatment

The study describes the current state of knowledge on nanotechnology and its utilization in medicine. The focus in this manuscript was on the properties, usage safety, and potentially valuable applications of chitosan-based nanomaterials. Chitosan nanoparticles have high importance in nanomedicine, biomedical engineering, discovery and development of new drugs. The manuscript reviewed the new studies regarding the use of chitosan-based nanoparticles for creating new release systems with improved bioavailability, increased specificity and sensitivity, and reduced pharmacological toxicity of drugs. Nowadays, effective cancer treatment is a global problem, and recent advances in nanomedicine are of great importance. Special attention was put on the application of chitosan nanoparticles in developing new system for anticancer drug delivery. Pre-clinical and clinical studies support the use of chitosan-based nanoparticles in nanomedicine. This manuscript overviews the last progresses regarding the utilization, stability, and bioavailability of drug nanoencapsulation with chitosan and their safety.

Chitosan-based microneedles as a potential platform for drug delivery through the skin: Trends and regulatory aspects

Microneedles (MNs) fabrication using chitosan has gained significant interest due to its ability of film-forming, biodegradability, and biocompatibility, making it suitable for topical and transdermal drug delivery. The presence of amine and hydroxyl functional groups on chitosan permits the modification with tunable properties and functionalities. In this regard, chitosan is the preferred material for fabrication of MNs because it does not produce an immune response in the body and can be tailored as per required strength and functionalities. Therefore, many researchers have attempted to use chitosan as a drug delivery vehicle for hydrophilic drugs, peptides, and hormones. In 2020, the FDA has issued "Regulatory Considerations for Microneedling Products". This official guidance is a sign for future opportunities in the development of MNs. The present review focuses on properties, and modifications of chitosan used in the fabrication of MNs. The therapeutic and diagnostic applications of different types of chitosan-based MNs have been discussed. Further, the regulatory aspects of MN-based devices, and patents related to chitosan-based MNs are discussed.

Role of chitosan based nanomedicines in the treatment of chronic respiratory diseases

Chitosan-loaded nanomedicines provide a greater opportunity for the treatment of respiratory diseases. Natural biopolymer chitosan and its derivatives have a large number of proven pharmacological actions like antioxidant, wound healing, immuno-stimulant, hypocholesterolemic, antimicrobial, obesity treatment, anti-inflammatory, anticancer, bone tissue engineering, antifungal, regenerative medicine, anti-diabetic and mucosal adjuvant, etc. which attracted its use in the pharmaceutical industry. As compared to other polysaccharides, chitosan has excellent mucoadhesive characteristics, less viscous, easily modified into the chemical and biological molecule and gel-forming property due to which the drugs retain in the respiratory tract for a longer period of time providing enhanced therapeutic action of the drug. Chitosan-based nanomedicines would have the greatest effect when used to transport poor water soluble drugs, macromolecules like proteins, and peptides through the lungs. In this review, we highlight and discuss the role of chitosan and its nanomedicines in the treatment of chronic respiratory diseases such as pneumonia, asthma, COPD, lung cancer, tuberculosis, and COVID-19.

Carbamoylated chitosan hydrogels with improved viscoelastic properties and stability for potential 3D cell culture applications

We demonstrate a benign and straightforward method to modify the chitosan (CH) by carbamoylation. The free amines on CH are converted into carbamyl functionalities by reacting with potassium cyanate (KCNO). One wt% CH solution, when reacted with KCNO ⩾ 0.1 M, leads to the sol-gel transition of CH through the hydrogen bonding to form carbamoylated chitosan (CCH) hydrogel. Gelation time of CCH decreases with an increase in the KCNO concentration and an interconnected porous network is formed as observed under SEM. Rheological studies show that while one wt% CH solution is a viscous liquid, the CCH hydrogel with 0.5 M KCNO has a storage modulus (G') of 10⁴Pa. The CCH hydrogel is proved to be non-cytotoxic and promotes the attachment and growth of the small lung cancer model A549, and the neuroblastoma SH-SY5Y cell lines. CCH hydrogel also promotes the differentiation of SH-SY5Y cells into neuronal cells, as supported by immunostaining and thus demonstrating its utility as a versatile scaffold for three-dimensional cell-culture systems.

Thermosensitive Chitosan-β-Glycerophosphate Hydrogels as Targeted Drug Delivery Systems: An Overview on Preparation and Their Applications

Today, with the advances in technology and science, more advanced drug delivery formulations are required. One of these new systems is an intelligent hydrogel. These systems are affected by the environment or conditions that become a gel, stay in the circumstance for a certain period, and slowly release the drug. As an advantage, only a lower dose of the drug is required, and it provides less toxicity and minor damage to other tissues. Hydrogels are of different types, including temperature-sensitive, pH-sensitive, ion change-sensitive, and magnetic field-sensitive. In this study, we investigated a kind of temperature-sensitive smart hydrogel, which has a liquid form at room temperature and becomes gel with increasing temperature. Chitosan-β-glycerophosphate hydrogels have been researched and used in many studies. This study investigates the various factors that influence the gelation mechanism, such as gel formation rates, temperature, pH, time, and gel specificity. Hydrogels are used in many drug delivery systems and diseases, including nasal drug delivery, vaginal drug delivery, wound healing, peritoneal adhesion, ophthalmic drug delivery, tissue engineering, and peptide and protein delivery. Overall, the chitosan-β-glycerophosphate hydrogel is a suitable drug carrier for a wide range of drugs. It shows little toxicity to the body, is biodegradable, and is compatible with other organs. This system can be used in different conditions and different medication ways, such as oral, nasal, and injection.

Nanochitosan: Commemorating the Metamorphosis of an ExoSkeletal Waste to a Versatile Nutraceutical

Chitin (poly-N-acetyl-D-glucosamine) is the second (after cellulose) most abundant organic polymer. In its deacetylated form-chitosan-becomes a very interesting material for medical use. The chitosan nano-structures whose preparation is described in this article shows unique biomedical value. The preparation of nanochitosan, as well as the most vital biomedical applications (antitumor, drug delivery and other medical uses), have been discussed in this review. The challenges confronting the progress of nanochitosan from benchtop to bedside clinical settings have been evaluated. The need for inclusion of nano aspects into chitosan research, with improvisation from nanotechnological inputs has been prescribed for breaking down the limitations. Future perspectives of nanochitosan and the challenges facing nanochitosan applications and the areas needing research focus have been highlighted.

Aptamer-based ATP-responsive delivery systems for cancer diagnosis and treatment

In recent years, many stimuli-triggered drug delivery platforms have been designed to deliver drugs accurately to specific sites and reduce their side effects, improving "on-demand" therapeutic efficacy. Adenosine-5'-triphosphate (ATP)-responsive drug delivery methods are examples of these systems that use ATP molecules as a trigger for delivery of therapeutic agents. Since intra- and extra-cellular ATP concentrations are significantly different from each other (1-10 mM and <0.4 mM, respectively), the use of ATP can be a practical method for regulating drug release. Aptamers possess unique properties including, ligand-specific response, short sequence (~ 20-80 bases) and easy functionalization. Thus, their combination with ATP-responsive systems results in more accurate drug delivery systems and greater control of drug release. A wide range of nanoparticles, such as polymeric nanogels, liposomes, metallic nanoparticles, protein, or DNA nano-assemblies, have been employed in the fabrication of nanocarriers. In this review, we describe several ATP-responsive drug delivery systems based on the various carriers and discuss the challenges and strengths of each method.

Antimicrobial Actions and Applications of Chitosan

Chitosan is a naturally originating product that can be applied in many areas due to its biocompatibility, biodegradability, and nontoxic properties. The broad-spectrum antimicrobial activity of chitosan offers great commercial potential for this product. Nevertheless, the antimicrobial activity of chitosan varies, because this activity is associated with its physicochemical characteristics and depends on the type of microorganism. In this review article, the fundamental properties, modes of antimicrobial action, and antimicrobial effects-related factors of chitosan are discussed. We further summarize how microorganisms genetically respond to chitosan. Finally, applications of chitosan-based biomaterials, such as nanoparticles and films, in combination with current clinical antibiotics or antifungal drugs, are also addressed.

Emulsion-free chitosan-genipin microgels for growth plate cartilage regeneration

The growth plate is a cartilage tissue near the ends of children's long bones and is responsible for bone growth. Injury to the growth plate can result in the formation of a 'bony bar' which can span the growth plate and result in bone growth abnormalities in children. Biomaterials such as chitosan microgels could be a potential treatment for growth plate injuries due to their chondrogenic properties, which can be enhanced through loading with biologics. They are commonly fabricated via an emulsion method, which involves solvent rinses that are cytotoxic. Here, we present a high throughput, non-cytotoxic, non-emulsion-based method to fabricate chitosan-genipin microgels. Chitosan was crosslinked with genipin to form a hydrogel network, and then pressed through a syringe filter using mesh with various pore sizes to produce a range of microgel particle sizes. The microgels were then loaded with chemokines and growth factors and their release was studied in vitro. To assess the applicability of the microgels for growth plate cartilage regeneration, they were injected into a rat growth plate injury. They led to increased cartilage repair tissue and were fully degraded by 28 days in vivo. This work demonstrates that chitosan microgels can be fabricated without solvent rinses and demonstrates their potential for the treatment of growth plate injuries.

Chitosan-based systems aimed at local application for vaginal infections

Vaginal administration is a promising route for the local treatment of infectious vaginal diseases since it can bypass the first-pass metabolism, drug interactions, and adverse effects. However, the commercial products currently available for topical vulvovaginal treatment have low acceptability and do not adequately explore this route. Mucoadhesive systems can optimize the efficacy of drugs administered by this route to increase the retention time of the drug in the vaginal environment. Several polymers are used to develop mucoadhesive systems, among them chitosan, a natural polymer that is highly biocompatible and technologically versatile. Thus, the present review aimed to analyze the studies that used chitosan to develop mucoadhesive systems for the treatment of local vaginal infections. These studies demonstrated that chitosan as a component of mucoadhesive drug delivery systems (DDS) is a promising device for the treatment of vaginal infectious diseases, due to the intrinsic antimicrobial activity of this biopolymer and because it does not interfere with the effectiveness of the drugs used for the treatment.

Peptide-Chitosan Engineered Scaffolds for Biomedical Applications

Peptides are signaling epitopes that control many vital biological events. Increased specificity, synthetic feasibility with concomitant lack of toxicity, and immunogenicity make this emerging class of biomolecules suitable for different applications including therapeutics, diagnostics, and biomedical engineering. Further, chitosan, a naturally occurring linear polymer composed of d-glucosamine and N-acetyl-d-glucosamine units, possesses anti-microbial, muco-adhesive, and hemostatic properties along with excellent biocompatibility. As a result, chitosan finds application in drug/gene delivery, tissue engineering, and bioimaging. Despite these applications, chitosan demonstrates limited cell adhesion and lacks biosignaling. Therefore, peptide-chitosan hybrids have emerged as a new class of biomaterial with improved biosignaling properties and cell adhesion properties. As a result, recent studies encompass increased application of peptide-chitosan hybrids as composites or conjugates in drug delivery, cell therapy, and tissue engineering and as anti-microbial material. This review discusses the recent investigations involving chitosan-peptide materials and uncovers various aspects of these interesting hybrid materials for biomedical applications.

Penetration Enhancers for Topical Drug Delivery to the Ocular Posterior Segment-A Systematic Review

There is an unmet clinical need for eye drop formulations to efficiently treat the diseases of the posterior ocular segment by non-invasive topical administration. Here, we systematically reviewed the literature on ocular penetration enhancers and their ability to transfer drugs to the posterior segment of the eye in experimental studies. Our aim was to assess which penetration enhancer is the most efficient at delivering drugs to the posterior segment of the eye, when topically applied. We conducted a comprehensive search in three electronic databases (Ovid Embase, Ovid MEDLINE, and PubMed) to identify all the relevant manuscripts reported on ocular penetration enhancers based on the PRISMA guidelines. We identified 6540 records from our primary database search and filtered them per our inclusion/exclusion criteria to select a final list of 14 articles for qualitative synthesis. Of these, 11 studies used cell penetrating peptides (CPPs), 2 used chitosan, and 1 used benzalkonium chloride (BAC) as the penetration enhancer. Cationic and amphipathic CPPs, transactivator of transcription (TAT), and penetratin can be inferred to be the best among all the identified penetration enhancers for drug delivery to the fundus oculi via topical eye drop instillation. Further high-quality experimental studies are required to ascertain their quantitative efficacy.

Systematic Review of Effectiveness of Chitosan as a Biofunctionalizer of Titanium Implants

Simple Summary

The low bioactivity of titanium limits its applications. The biofunctionalization of its surfaces with certain polymers could improve and accelerate the osseointegration process. Chitosan is a natural polysaccharide derived from chitin, which has been proposed in biomedical engineering. This systematic review evaluated in vivo studies with chitosan-coated titanium implants compared with non-functionalized implants.

Abstract

Chitosan is a natural polysaccharide extracted from the shells of crustaceans that has been proposed as a scaffold in tissue engineering. Certain studies have proven a greater osseointegration of titanium surfaces that are functionalized with chitosan. The MEDLINE, CENTRAL, PubMed, and Web of Science databases were electronically searched for in vivo studies. Seven studies met the inclusion criteria. Animal models, implant site, chitosan incorporation methods, and methods of analysis were emphasized. The selected studies were individually discussed regarding the coatings, osseointegration potential, and suitability of the experimental models used, analyzing their limitations. We concluded that chitosan-biofunctionalized titanium surfaces have greater osseointegration capacity that uncoated control titanium alloys.

Hyaluronic Acid and Poly-l-Lysine Layers on Calcium Alginate Microspheres to Modulate the Release of Encapsulated FITC-Dextran

Alginate solutions crosslink into microspheres in calcium alginate, enabling the encapsulation and subsequent release of biological macromolecules and drugs. However, release from calcium alginate into PBS is relatively fast because it will decrosslink the gel relatively quickly. In this research, FITC-dextran (MW 10 kDa) was encapsulated in 2% (w/v) calcium alginate microspheres by electrospraying. The resulting microspheres (diameter = 247 ± 13 μm) were then layered with thin polyelectrolyte films of hyaluronic acid (HA) and poly-l-lysine (PLL) to attempt to slow the diffusion of FITC-dextran out of the microspheres and the coating parameters were modified to modulate diffusion and release. Increasing the concentration of FITC-dextran encapsulated in the microspheres resulted in an increase in its release over time into PBS. Crosslinking PLL/HA layers on the microspheres did not decrease the in vitro release rates of encapsulated FITC-dextran into PBS. Increasing the number of layers on the microspheres from 3 to 5 layers significantly decreased the amount of encapsulated FITC-dextran released. However, increasing the number of layers to 7 did not further sustain the release of FITC-dextran, likely because these microspheres collapsed to a smaller size during the coating procedure, resulting in release controlled by both diffusion and swelling. Multiple layers of PLL and HA provided a robust mechanism to sustain and control release of large molecules from calcium alginate.

Synthesis of Biotin-Tagged Chitosan Oligosaccharides and Assessment of Their Immunomodulatory Activity

Chitin, a polymer of β-(1→4)-linked N-acetyl-d-glucosamine, is one of the main polysaccharide components of the fungal cell wall. Its N-deacetylated form, chitosan, is enzymatically produced in the cell wall by chitin deacetylases. It exerts immunomodulative, anti-inflammatory, anti-cancer, anti-bacterial, and anti-fungal activities with various medical applications. To study the immunobiological properties of chitosan oligosaccharides, we synthesized a series of β-(1→4)-linked N-acetyl-d-glucosamine oligomers comprising 3, 5, and 7 monosaccharide units equipped with biotin tags. The key synthetic intermediate employed for oligosaccharide chain elongation, a disaccharide thioglycoside, was prepared by orthogonal glycosylation of a 4-OH thioglycoside acceptor with a glycosyl trichloroacetimidate bearing the temporary 4-O-tert-butyldimethylsilyl group. The use of silyl protection suppressed aglycon transfer and provided a high yield for the target disaccharide donor. Using synthesized chitosan oligomers, as well as previously obtained chitin counterparts, the immunobiological relationship between these synthetic oligosaccharides and RAW 264.7 cells was studied in vitro. Evaluation of cell proliferation, phagocytosis, respiratory burst, and Th1, Th2, Th17, and Treg polarized cytokine expression demonstrated effective immune responsiveness and immunomodulation in RAW 264.7 cells exposed to chitin- and chitosan-derived oligosaccharides. Macrophage reactivity was accompanied by significant inductive dose- and structure-dependent protective Th1 and Th17 polarization, which was greater with exposure to chitosan- rather than chitin-derived oligosaccharides. Moreover, no antiproliferative or cytotoxic effects were observed, even following prolonged 48 h exposure. The obtained results demonstrate the potent immunobiological activity of these synthetically prepared chito-oligosaccharides.