A novel microporous polyurethane blood conduit: biocompatibility assessment of the UTA arterial prosthesis by an organo-typic culture technique

Biobased polyurethanes for biomedical applications

Polyurethanes (PUs) are a major family of polymers displaying a wide spectrum of physico-chemical, mechanical and structural properties for a large range of fields. They have shown suitable for biomedical applications and are used in this domain since decades. The current variety of biomass available has extended the diversity of starting materials for the elaboration of new biobased macromolecular architectures, allowing the development of biobased PUs with advanced properties such as controlled biotic and abiotic degradation. In this frame, new tunable biomedical devices have been successfully designed. PU structures with precise tissue biomimicking can be obtained and are adequate for adhesion, proliferation and differentiation of many cell's types. Moreover, new smart shape-memory PUs with adjustable shape-recovery properties have demonstrated promising results for biomedical applications such as wound healing. The fossil-based starting materials substitution for biomedical implants is slowly improving, nonetheless better renewable contents need to be achieved for most PUs to obtain biobased certifications. After a presentation of some PU generalities and an understanding of a biomaterial structure-biocompatibility relationship, recent developments of biobased PUs for non-implantable devices as well as short- and long-term implants are described in detail in this review and compared to more conventional PU structures.

Composite articular cartilage engineered on a chondrocyte-seeded aliphatic polyurethane sponge

To circumvent the reconstructive disadvantages inherent in resorbable polyglycolic acid (PGA)/polylactic acid (PLA) used in cartilage engineering, a nonresorbable, and nonreactive polyurethane sponge (Tecoflex sponge, TS) was studied as both a cell delivery device and as an internal support scaffolding. The in vitro viability and proliferation of porcine articular chondrocytes (PACs) in TS, and the in vivo generation of new articular cartilage and long-term resorption, were examined. The initial cell attachment rate was 40%, and cell density increased more than 5-fold after 12 days of culture in vitro. PAC-loaded TS blocks were implanted into nude mice, became opalescent, and resembled native cartilage at weeks 12 and 24 postimplantation. The mass and volume of newly formed cartilage were not significantly different at week 24 from samples harvested at week 6 or week 12. Safranin O-fast green staining revealed that the specimens from cell-loaded TS groups at week 12 and week 24 consisted of mature cartilage. Collagen typing revealed that type II collagen was present in all groups of tissue-engineered cartilage. In conclusion, the implantation of PAC-TS resulted in composite tissue-engineered articular cartilage with TS as an internal support. Long-term observation (24 weeks) of mass and volume showed no evidence of resorption.

Selection of a polyurethane membrane for the manufacture of ventricles for a totally implantable artificial heart: blood compatibility and biocompatibility studies

Membranes made from 4 commercial poly(carbonate urethanes): Carbothane (CB), Chronoflex (CF), Corethane 80A (CT80), and Corethane 55D (CT55), and from 2 poly(ether urethanes): Tecoflex (TF) and Tecothane (TT) were prepared by solution casting and sterilized by either ethylene oxide (EO) or gamma radiation. Their biocompatibility was evaluated in vitro in terms of proliferation, cell viability, and adhesion characteristics of human umbilical veins (HUVEC), monocytes (THP-1), and skin fibroblasts, and by measuring complement activation through the generation of the C3a complex. Their hemocompatibility was determined by measuring the level of radiolabeled platelet, neutrophil, and fibrin adhesion in an ex vivo arteriovenous circuit study in piglets as well as via an in vitro hemolysis test. The results of this study showed no endothelial cell proliferation on any of the materials. The cell viability study revealed that the CB, CF, and TF membranes sterilized by EO maintained the highest percentage of monocyte viability after 72 h of incubation (>70%) while none of the gamma-sterilized membranes displayed any cell viability. The fibroblast adhesion and C3a generation assays revealed that none of the materials supported any cell adhesion or activated complement, regardless of the sterilization method. The hemolysis test also confirmed that the 4 poly(carbonate urethanes) were hemolytic while none of the poly(ether urethanes) were. Finally, the ex vivo study revealed that significantly more platelets adhered to the CB and CT55 membranes while the levels of neutrophil and fibrin deposition were observed to be similar for all 6 materials. In conclusion, the study identified the CF and TF membranes as having superior biocompatibility and hemocompatibility compared to the other polyurethanes.

Evaluation of teflon-coated intraocular lenses in an organ culture method

An amorphous and transparent form of Teflon is proposed as a coating of polymethylmethacrylate (PMMA) intraocular lenses (IOLs), rendering them highly hydrophobic. We used an organ culture method to evaluate cell adhesion, proliferation, and migration on Teflon-coated IOLs. Corneal explants from 14-day-old chicken embryos were placed on a semisolid culture medium and covered with uncoated PMMA (n = 36) and Teflon-coated PMMA (n = 36) IOLs and two controls, Thermanox (n = 84) and latex (n = 36). After incubation (7 days at 37 degrees C), a digital imaging system was used to measure the areas of the cell migration layers on the materials. The cells were then removed with tripsin-ethylenediaminetetraacetic acid and the cells detached at times up to 75 min were counted (Coulter(R) Multisizer System). The values were used to construct a cell disconnecting curve for each material. The areas of cell migration layers on uncoated and Teflon-coated IOLs were significantly different (p <.05). Cell disconnecting curves demonstrated that cells adhered less strongly to Teflon-coated IOLs than to the other materials. This organ culture method demonstrated that the coating of PMMA IOLs with Teflon AF(R) is correlated with antiadhesive and antiproliferative properties.

Correlation between substratum roughness and wettability, cell adhesion, and cell migration

Cell adhesion and spreading of chick embryo vascular and corneal explants grown on rough and smooth poly (methyl methacrylate) (PMMA) were analyzed to test the cell response specificity to substratum surface properties. Different degrees of roughness were obtained by sand-blasting PMMA with alumina grains. Hydrophilic and hydrophobic components of the surface free energy (SFE) were calculated according to Good-van Oss's model. Contact angles were determined using a computerized angle meter. The apolar component of the SFE gamma s(LW), increased with a slight roughness whereas the basic component, gamma s-, decreased. The acido-basic properties disappeared as roughness increased. Incubation of PMMA in culture medium, performed to test the influence if the biological environment, allowed surface adsorption of medium proteins which annihilated roughness effect and restored hydrophilic properties. An organotypic culture assay was carried out in an attempt to relate the biocompatibility to substratum surface state. Cell migration was calculated from the area of cell layer. Cellular adhesion was determined by measuring the kinetic of release of enzymatically dissociated cells. A slight roughness raised the migration are to an upper extent no matter which cell type. Enhancement of the cell adhesion potential was related to the degree of roughness and the hydrophobicity.

Correlation between substratum roughness and wettability, cell adhesion, and cell migration

Cell adhesion and spreading of chick embryo vascular and corneal explants grown on rough and smooth poly (methyl methacrylate) (PMMA) were analyzed to test the cell response specificity to substratum surface properties. Different degrees of roughness were obtained by sand-blasting PMMA with alumina grains. Hydrophilic and hydrophobic components of the surface free energy (SFE) were calculated according to Good-van Oss's model. Contact angles were determined using a computerized angle meter. The apolar component of the SFE gamma s(LW), increased with a slight roughness whereas the basic component, gamma s-, decreased. The acido-basic properties disappeared as roughness increased. Incubation of PMMA in culture medium, performed to test the influence if the biological environment, allowed surface adsorption of medium proteins which annihilated roughness effect and restored hydrophilic properties. An organotypic culture assay was carried out in an attempt to relate the biocompatibility to substratum surface state. Cell migration was calculated from the area of cell layer. Cellular adhesion was determined by measuring the kinetic of release of enzymatically dissociated cells. A slight roughness raised the migration are to an upper extent no matter which cell type. Enhancement of the cell adhesion potential was related to the degree of roughness and the hydrophobicity.