Methodologies for the quantitative estimation of toxicant dose to cigarette smokers using physical, chemical and bioanalytical data

Smoking data quality of primary care practices in comparison with smoking data from the New Zealand Māori and Pacific abdominal aortic aneurysm screening programme: an observational study

BACKGROUND

Quality smoking data is crucial for assessing smoking-related health risk and eligibility for interventions related to that risk. Smoking information collected in primary care practices (PCPs) is a major data source; however, little is known about the PCP smoking data quality. This project compared PCP smoking data to that collected in the Māori and Pacific Abdominal Aortic Aneurysm (AAA) screening programme.

METHODS

A two stage review was conducted. In Stage 1, data quality was assessed by comparing the PCP smoking data recorded close to AAA screening episodes with the data collected from participants at the AAA screening session. Inter-rater reliability was analysed using Cohen's kappa scores. In Stage 2, an audit of longitudinal smoking status was conducted, of a subset of participants potentially misclassified in Stage 1. Data were compared in three groups: current smoker (smoke at least monthly), ex-smoker (stopped > 1 month ago) and never smoker (smoked < 100 cigarettes in lifetime).

RESULTS

Of the 1841 people who underwent AAA screening, 1716 (93%) had PCP smoking information. Stage 1 PCP smoking data showed 82% concordance with the AAA data (adjusted kappa 0.76). Fewer current or ex-smokers were recorded in PCP data. In the Stage 2 analysis of discordant and missing data (N = 313), 212 were enrolled in the 29 participating PCPs, and of these 13% were deceased and 41% had changed PCP. Of the 93 participants still enrolled in the participating PCPs, smoking status had been updated for 43%. Data on quantity, duration, or quit date of smoking were largely missing in PCP records. The AAA data of ex-smokers who were classified as never smokers in the Stage 2 PCP data (N = 27) showed a median smoking cessation duration of 32 years (range 0-50 years), with 85% (N = 23) having quit more than 15 years ago.

CONCLUSIONS

PCP smoking data quality compared with the AAA data is consistent with international findings. PCP data captured fewer current and ex-smokers, suggesting ongoing improvement is important. Intervention programmes based on smoking status should consider complementary mechanisms to ensure eligible individuals are not missed from programme invitation.

A sensitive GC-MS/MS method for the quantification of benzo[a]pyrene tetrol in urine

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous pollutants formed during the incomplete combustion of organic matter such as tobacco. Among these, benzo[a]pyrene (BaP) has been classified as a known carcinogen to humans. It unfolds its effect through metabolic activation to BaP-(7R,8S)-diol-(9S,10R)-epoxide (BPDE), the ultimate carcinogen of BaP. In this article, we describe a simple and highly sensitive GC-NICI-MS/MS method for the quantification of urinary BaP-(7R,8S,9R,10S)-tetrol (( +)-BPT I-1), the hydrolysis product of BPDE. The method was validated and showed excellent results in terms of accuracy, precision, and sensitivity (lower limit of quantification (LLOQ): 50 pg/L). In urine samples derived from users of tobacco/nicotine products and non-users, only consumption of combustible cigarettes was associated with a significant increase in BPT I-1 concentrations (0.023 ± 0.016 nmol/mol creatinine, p < 0.001). Levels of users of potentially reduced-risk products as well as non-users were all below the LLOQ. In addition, the urine levels of six occupationally exposed workers were analyzed and showed the highest overall concentrations of BPT I-1 (844.2 ± 336.7 pg/L). Moreover, comparison with concentrations of 3-hydroxybenzo[a]pyrene (3-OH-BaP), the major detoxification product of BaP oxidation, revealed higher levels of 3-OH-BaP than BPT I-1 in almost all study subjects. Despite the lower levels, BPT I-1 can provide more relevant information on an individual's cancers susceptibility since BPDE is generated by the metabolic activation of BaP. In conclusion, BPT I-1 is a suitable biomarker to distinguish not only cigarette smokers from non-smokers but also from users of potentially reduced-risk products.

Acrylamide levels in smoke from conventional cigarettes and heated tobacco products and exposure assessment in habitual smokers

Acrylamide (AA) is a neurotoxic, genotoxic, and carcinogenic compound developed during heating at high temperatures. Foods such as potatoes, biscuits, bread and coffee are the main foodstuffs containing AA. Cigarette smoke may be a significant additional source of exposure. However, AA content may vary among different types of cigarettes. The study aimed to evaluate the AA content in conventional cigarettes (CC) and heated tobacco products (HTP) and its resulting exposure through their use. AA levels from the two types of cigarettes were determined by GC-MS and the daily exposure to AA was also ascertained. The margin of exposure (MOE) was calculated for neurotoxic and carcinogenic risk based on benchmark dose lower confidence limit for a 10% response (BMDL10) of 0.43 and 0.17, 0.30, and 1.13 mg/kgbw/day. AA level in CC ranged from 235 to 897 ng/cigarette, whereas HTP reported AA levels in the range of 99-187 ng/cigarette. The data showed a low neurotoxic risk for either CC or HTP, whereas a carcinogenic risk emerged through the smoking of CC based on different Benchmark doses. The carcinogenic risk for CC based on the highest Benchmark dose that was considered showed unsafe levels, as little as 10 CC cigarettes/day, whereas it was almost always of low concern for HTP. Another approach based upon the incremental lifetime cancer risk (ILCR) analysis led to similar results, exceeding, in some cases, the safety value of 10-4, as far as CC are concerned. Overall, the results confirmed that CC are a significant source of AA, and its levels were five times higher than in HTP.

Assessment of nicotine delivery and uptake in users of various tobacco/nicotine products

•

Nicotine uptake doses from various products show a large overlap between each other.

•

Combustible cigarettes and oral tobacco products are at the high end of the nicotine uptake doses.

•

Simple models for daily amounts of nicotine intake can predict the nicotine doses for most product users.

•

Larger deviations were observed for smokers and users of heated tobacco products.

•

The most probable reason for these deviations are differences in parameters for puffing and inhalation and actual behavior of the users.

Today various tobacco and nicotine products are available, many of them can be regarded as potentially risk-reduced products when compared to the most frequently used product, combustible cigarettes (CCs). A commonality of these products is that they deliver nicotine, although in quite different amounts and uptake routes, the most common of which are inhalation through the lung and absorption through the oral mucosa. Product-specific nicotine delivery as well as the subject-related use patterns are important factors which determine the pharmacokinetics and achieved internal dose levels of the alkaloid. The latter two parameters are highly relevant for the long-term product loyalty and, consequently, for the implicated health risks, since the risk-reduced products will replace CCs in the long-term only when users will experience a similar level of satisfaction. We measured nicotine and its major metabolites in plasma, saliva and urine samples collected in a controlled clinical study with habitual users (10 per group) of CCs, electronic cigarettes (ECs), heated tobacco products (HTP), oral tobacco (OT), and nicotine replacement therapy (NRT). Non-users (NU) of any tobacco/nicotine products served as (negative) control group. Moderate to strong correlations were observed between the daily consumption and the urinary nicotine equivalents (comprising nicotine and its 10 major metabolites, Nic + 10) or plasma and saliva cotinine concentrations. The average daily nicotine dose as measured by the urinary excretion of Nic + 10 (reflecting approximately 95 % of the absorbed nicotine) amounted to 17 and 22 mg/24 h for smokers (CC) and OT users, respectively, while it was in the range of 6–12 mg/24 h for users of ECs, HTP and NRT products, with high inter-individual variations in each user group. The individual daily nicotine intake, which was calculated by applying product-specific models, showed none to good agreement with the corresponding internal nicotine dose measured by Nic + 10 excretion. Possible reasons for the observed deviations between calculated and objectively measured nicotine doses are discussed.

The Emission of VOCs and CO from Heated Tobacco Products, Electronic Cigarettes, and Conventional Cigarettes, and Their Health Risk

The differences in aerosol composition between new tobacco types (heated tobacco products and electronic cigarettes) and conventional cigarettes have not been systematically studied. In this study, the emissions of volatile organic compounds (VOCs), carbon monoxide (CO), nicotine, and tar from heated tobacco products (HTPs), electronic cigarettes (e-cigarettes) and conventional cigarettes were compared, and their health risks were evaluated by applying the same smoking regime and a loss mechanism of smoking. Twenty VOCs were identified in aerosols from HTPs, 18 VOCs were identified in aerosols from e-cigarettes, and 97 VOCs were identified in aerosols from cigarettes by GC–MS and HPLC analysis. The concentrations of total VOCs (TVOCs) emitted by the three types of tobacco products decreased as follows: e-cigarettes (795.4 mg/100 puffs) > cigarettes (83.29 mg/100 puffs) > HTPs (15.65 mg/100 puffs). The nicotine content was 24.63 ± 2.25 mg/100 puffs for e-cigarettes, 22.94 ± 0.03 mg/100 puffs for cigarettes, and 8.817 ± 0.500 mg/100 puffs for HTPs. When using cigarettes of the same brand, the mass concentrations of VOCs, tar, and CO emitted by HTPs were approximately 81.2%, 95.9%, and 97.5%, respectively, lower than the amounts emitted by cigarettes. The health risk results demonstrated that the noncarcinogenic risk of the three types of tobacco products decreased as follows: cigarettes (3609.05) > HTPs (2449.70) > acceptable level (1) > e-cigarettes (0.91). The lifetime cancer risk (LCR) decreased as follows: cigarettes (2.99 × 10⁻⁴) > HTPs (9.92 × 10⁻⁵) > e-cigarettes (4.80 × 10⁻⁵) > acceptable level (10⁻⁶). In general, HTPs and e-cigarettes were less harmful than cigarettes when the emission of VOCs and CO was considered.

Emissions from Heated Terpenoids Present in Vaporizable Cannabis Concentrates

Vaporizable cannabis concentrates (VCCs) consumed as a liquid (vaping) or a waxy solid (dabbing) are becoming increasingly popular. However, their associated emissions and impacts have not been fully described. Mixtures containing different proportions of 12 VCC terpenoids and high MW compounds were heated at 100-500 °C inside a room-sized chamber to simulate emissions. Terpenoids, thermal degradation byproducts, and ultrafine particles (UFPs) were quantified in the chamber air. Air samples contained over 50% of emitted monoterpenes and less than 40% of released sesquiterpenes and terpene alcohols. Eleven degradation byproducts were quantified, including acrolein (1.3-3.9 μg m^-3) and methacrolein (2.0 μg m^-3). A large amount of UFPs were released upon heating and remained airborne for at least 3 h. The mode diameter increased from 80 nm at 100 °C to 140 nm at 500 °C, and particles smaller than 250 nm contributed to 90% of PM_1.0. The presence of 0.5% of lignin, flavonoid, and triterpene additives in the heated mixtures resulted in a threefold increase in the particle formation rate and PM_1.0 concentration, suggesting that these high-molecular-weight compounds enhanced aerosol inception and growth. Predicted UFP emission rates in typical consumption scenarios (6 × 10¹¹-2 × 10¹³ # min^-1) were higher than, or comparable with, other common indoor sources such as smoking and cooking.

Exposure Load: Using biomonitoring data to quantify multi-chemical exposure burden in a population

People are often concurrently exposed to numerous chemicals. Here we sought to leverage existing large biomonitoring datasets to improve our understanding of multi-chemical exposures in a population. Using nationally-representative data from the 2012-2015 Canadian Health Measures Survey (CHMS), we developed Exposure Load, a metric that counts the number of chemicals measured in people above a defined concentration threshold. We calculated Exposure Loads based on five concentration thresholds: the analytical limit of detection (LOD) and the 50th, 75th, 90th and 95th percentiles. Our analysis considered 44 analyte biomarkers representing 26 chemicals from the 2012-2015 CHMS; complete biomarker data were available for 1858 participants aged 12-79 years following multiple imputation of results that were missing due to sample loss. Chemicals may have one or more biomarkers, and for the purposes of Exposure Load calculation, participants were considered to be exposed to a chemical if at least one biomarker was above the threshold. Distributions of Exposure Loads are reported for the total population, as well as by age group, sex and smoking status. Canadians had an Exposure Load between 9 and 21 (out of 26) when considering LOD as the threshold, with the majority between 13 and 18. At higher thresholds, such as the 95th percentile, the majority of Canadians had an Exposure Load between 0 and 3, although some people had an Exposure Load of up to 15, indicating high exposures to multiple chemicals. Adolescents aged 12-19 years had significantly lower Exposure Loads than adults aged 40-79 years at all thresholds and adults aged 20-39 years at the 50th and 75th percentiles. Smokers had significantly higher Exposure Loads than nonsmokers at all thresholds except the LOD, which was expected given that tobacco smoke is a known source of certain chemicals included in our analysis. No differences in Exposure Loads were observed between males and females at any threshold. These findings broadly suggest that Canadians are concurrently exposed to many chemicals at lower concentrations and to fewer chemicals at high concentrations. They should assist in identifying vulnerable subpopulations disproportionately exposed to numerous chemicals at high concentrations. Future work will use Exposure Loads to identify prevalent chemical combinations and their link with adverse health outcomes in the Canadian population. The Exposure Load concept can be applied to other large datasets, through collaborative efforts in human biomonitoring networks, in order to further improve our understanding of multiple chemical exposures in different populations.

Cancer potencies and margin of exposure used for comparative risk assessment of heated tobacco products and electronic cigarettes aerosols with cigarette smoke

Health risk associated with the use of combustible cigarettes is well characterized and numerous epidemiological studies have been published for many years. Since more than a decade, innovative non-combusted tobacco products have emerged like heated tobacco products (HTP) or electronic cigarettes (EC). Long-term effects of these new products on health remain, however, unknown and there is a need to characterize associated potential health risks. The time dedicated to epidemiological data generation (at least 20 to 40 years for cancer endpoint), though, is not compatible with innovative development. Surrogates need, therefore, to be developed. In this work, non-cancer and cancer risks were estimated in a range of HTP and commercial combustible cigarettes based upon their harmful and potentially harmful constituent yields in aerosols and smoke, respectively. It appears that mean lifetime cancer risk values were decreased by more than one order of magnitude when comparing HTPs and commercial cigarettes, and significantly higher margin of exposure for non-cancer risk was observed for HTPs when compared to commercial cigarettes. The same approach was applied to two commercial ECs. Similar results were also found for this category of products. Despite uncertainties related to the factors used for the calculations and methodological limitations, this approach is valuable to estimate health risks associated to the use of innovative products. Moreover, it acts as predictive tool in absence of long-term epidemiological data. Furthermore, both cancer and non-cancer risks estimated for HTPs and ECs highlight the potential of reduced risk for non-combusted products when compared to cigarette smoking.

Comprehensive characterization of mainstream marijuana and tobacco smoke

Recent increases in marijuana use and legalization without adequate knowledge of the risks necessitate the characterization of the billions of nanoparticles contained in each puff of smoke. Tobacco smoke offers a benchmark given that it has been extensively studied. Tobacco and marijuana smoke particles are quantitatively similar in volatility, shape, density and number concentration, albeit with differences in size, total mass and chemical composition. Particles from marijuana smoke are on average 29% larger in mobility diameter than particles from tobacco smoke and contain 3.4× more total mass. New measurements of semi-volatile fractions determine over 97% of the mass and volume of the particles from either smoke source are comprised of semi-volatile compounds. For tobacco and marijuana smoke, respectively, 4350 and 2575 different compounds are detected, of which, 670 and 536 (231 in common) are tentatively identified, and of these, 173 and 110 different compounds (69 in common) are known to cause negative health effects through carcinogenic, mutagenic, teratogenic, or other toxic mechanisms. This study demonstrates striking similarities between marijuana and tobacco smoke in terms of their physical and chemical properties.

Heated Tobacco Products: Volatile Emissions and Their Predicted Impact on Indoor Air Quality

This study characterized emissions from IQOS, a heated tobacco product promoted as a less harmful alternative to cigarettes. Consumable tobacco plugs were analyzed by headspace GC/MS to assess the influence of heating temperature on the emission profile. Yields of major chemical constituents increased from 4.1 mg per unit at 180 °C to 6.2 mg at 200 °C, and 10.5 mg at 220 °C. The Health Canada Intense smoking regime was used to operate IQOS in an environmental chamber, quantifying 33 volatile organic compounds in mainstream and sidestream emissions. Aldehydes, nitrogenated species, and aromatic species were found, along with other harmful and potentially harmful compounds. Compared with combustion cigarettes, IQOS yields were in most cases 1-2 orders of magnitude lower. However, yields were closer to, and sometimes higher than electronic cigarettes. Predicted users' daily average intake of benzene, formaldehyde, acetaldehyde and acrolein were 39 μg, 32 μg, 2.2 mg and 71 μg, respectively. Indoor air concentrations were estimated for commonly encountered scenarios, with acrolein levels of concern (over 0.35 μg m-3) derived from IQOS used in homes and public spaces. Heated tobacco products are a weaker indoor pollution source than conventional cigarettes, but their impacts are neither negligible nor yet fully understood.

Risk assessment of toxicants on WHO TobReg priority list in mainstream cigarette smoke using human-smoked yields of Korean smokers

Recently, the World Health Organization Study Group on Tobacco Product Regulation (WHO TobReg) announced a priority list of 38 toxicants among the more than 7000 chemicals found in cigarette smoke, building upon previous lists of toxicants in cigarette smoke. Here, we conducted a comprehensive study on the quantitative exposure and risk characterization of these priority toxicants in mainstream cigarette smoke listed by the WHO TobReg. The human-smoked toxicant yields estimated from spent cigarette butts of a total of 361 smokers using the part-filter method (PFM) were applied to current exposure and risk estimation for the first time. The PFM can estimate human-smoked yields of toxicants using smokers' maximum mouth-level exposure. The human-smoked yield of each toxicant was converted to systemic uptake by considering bioavailability. Risk indicators-including the incremental lifetime cancer risk (ILCR), cumulative ILCR, hazard quotient (HQ), hazard indices (HIs), and margin of exposure (MOE)-were estimated from the systemic uptake of toxicants combined with Korean exposure factors by gender and age group as well as for total smokers. It was demonstrated that cigarette smoking results in significant cancer and non-cancer health risks. A sensitivity analysis showed that the human-smoked toxicant yield is one of the most important contributors to risk level variations. Our risk estimation suggested that previous risk assessments might have ignored or underestimated the uncertainty of risk assessment. In conclusion, we assessed the risk level of the 38 toxicants on the priority list developed by the WHO TobReg and provided a Korean-specific priority list for the regulations on the emission of cigarette smoke.

Development and validation of a method for quantification of two tobacco-specific nitrosamines in indoor air

A sensitive and accurate method for the quantification of 1'-Demethyl-1'-nitrosonicotine (NNN) and 4-(methylnitrosamino)-1-(3-Pyridyl)-1-butanone (NNK) in indoor air was developed and validated. To this aim, a novel approach for the collection of two tobacco-specific nitrosamines, using silica sorbent cartridges followed by simplified sample preparation and isotope dilution liquid chromatography/electrospray ionization tandem mass spectrometry, was applied. This procedure led to a substantial improvement in terms of sensitivity and sample throughput as compared with methods using conventional trapping. For the validation, a matrix-based approach using an accuracy profile procedure was selected. The evaluated matrices were background air samples, environmental aerosols of a heat-not-burn tobacco product (Tobacco Heating System [THS] 2.2, commercialized under the brand IQOS®), a rechargeable electronic cigarette (Solaris®), and the environmental tobacco smoke (ETS) of a conventional cigarette (Marlboro Gold®). The method showed excellent recoveries, sensitivity, and precision. The limits of detection of the method for NNN and NNK were 0.0108 ng/m3 and 0.0136 ng/m3, respectively. The calibration range of the instrument spanned 0.2-60 ng/mL. The calculated lower working range limit (LWRL) of the method for NNN was 0.126 ng/m3, and the LWRL for NNK was 0.195 ng/m3. The method was applied to evaluate surrogate environmental aerosols generated using smoking machines. This model is reliable but gives a large overestimation of the possible impact of THS 2.2 and e-cigarettes on indoor air, because the retention of NNN and NNK in the body of the consumers is not taken into account. As a consequence, the values reported do not reflect a real-life setting. The contents of the two target compounds in the surrogate environmental aerosols were 0.0830 ± 0.0153 ng/m3 of NNN and 0.0653 ± 0.0138 ng/m3 of NNK for THS 2.2, 0.0561 ± 0.0296 ng/m3 of NNN for e-cigarettes, and 0.816 ± 0.109 ng/m3 of NNN and 4.13 ± 1.04 ng/m3 NNK for cigarettes. These values correspond to 10% of the measured ETS concentration for NNN in environmental aerosols of THS 2.2 and 7% for those of e-cigarettes. For NNK, the value for the environmental aerosol of THS 2.2 was 2% of the ETS value.

Mixture risk assessment of selected mainstream cigarette smoke constituents generated from low-yield cigarettes in South Korean smokers

A total of 38 hazardous constituents in mainstream cigarette smoke of low-yield cigarettes sold in Korea were selected and analyzed using established methods. Risk calculations were performed using risk algorithms employed in previous studies and Korean population-based exposure parameters. The median cumulative incremental lifetime cancer risk of male smokers could vary from 828 × 10-6 to 2510 × 10-6, and that of female smokers could range from 440 × 10-6 to 1300 × 10-6, depending on the smoking regimens. The median hazard index as the sum of hazard quotients of male smokers varied from 367 to 1,225, and that of female smokers varied from 289 to 970, depending on the smoking regimens. The sensitivity analysis for this risk assessment indicated that the constituent yields in mainstream cigarette smoke, average number of cigarettes smoked per day or year, and mouth-spill rate are the main risk factors. Statistical positive correlations between the average daily dose calculated by the exposure algorithm used in this study for individual smokers and biomarkers verified the reliability of this assessment. It could be concluded that inhalation of the constituents present in the mainstream of low-yield cigarettes has significant cancer and non-cancer health risks, although its effect on risk reduction is still unknown under the fixed machine-smoking conditions.

Assessment of tobacco heating product THP1.0. Part 4: Characterisation of indoor air quality and odour

The tobacco heating product THP1.0, which heats but does not burn tobacco, was tested as part of a modified-risk tobacco product assessment framework for its impacts on indoor air quality and residual tobacco smoke odour. THP1.0 heats the tobacco to less than 240 °C ± 5 °C during puffs. An environmentally controlled room was used to simulate ventilation conditions corresponding to residential, office and hospitality environments. An analysis of known tobacco smoke constituents, included CO, CO₂, NO, NO₂, nicotine, glycerol, 3-ethenyl pyridine, sixteen polycyclic aromatic hydrocarbons, eight volatile organic compounds, four carbonyls, four tobacco-specific nitrosamines and total aerosol particulate matter. Significant emissions reductions in comparison to conventional cigarettes were measured for THP1.0. Levels of nicotine, acetaldehyde, formaldehyde and particulate matter emitted from THP1.0 exceeded ambient air measurements, but were more than 90% reduced relative to cigarette smoke emissions within the laboratory conditions defined Residual tobacco smoke odour was assessed by trained sensory panels after exposure of cloth, hair and skin to both mainstream and environmental emissions from the test products. Residual tobacco smoke odour was significantly lower from THP1.0 than from a conventional cigarette. These data show that using THP1.0 has the potential to result in considerably reduced environmental emissions that affect indoor air quality relative to conventional cigarettes.

Emissions from Electronic Cigarettes: Assessing Vapers' Intake of Toxic Compounds, Secondhand Exposures, and the Associated Health Impacts

E-cigarettes likely represent a lower risk to health than traditional combustion cigarettes, but they are not innocuous. Recently reported emission rates of potentially harmful compounds were used to assess intake and predict health impacts for vapers and bystanders exposed passively. Vapers' toxicant intake was calculated for scenarios in which different e-liquids were used with various vaporizers, battery power settings and vaping regimes. For a high rate of 250 puff day^-1 using a typical vaping regime and popular tank devices with battery voltages from 3.8 to 4.8 V, users were predicted to inhale formaldehyde (up to 49 mg day^-1), acrolein (up to 10 mg day^-1) and diacetyl (up to 0.5 mg day^-1), at levels that exceeded U.S. occupational limits. Formaldehyde intake from 100 daily puffs was higher than the amount inhaled by a smoker consuming 10 conventional cigarettes per day. Secondhand exposures were predicted for two typical indoor scenarios: a home and a bar. Contributions from vaping to air pollutant concentrations in the home did not exceed the California OEHHA 8-h reference exposure levels (RELs), except when a high emitting device was used at 4.8 V. In that extreme scenario, the contributions from vaping amounted to as much as 12 μg m^-3 formaldehyde and 2.6 μg m^-3 acrolein. Pollutant concentrations in bars were modeled using indoor volumes, air exchange rates and the number of hourly users reported in the literature for U.S. bars in which smoking was allowed. Predicted contributions to indoor air levels were higher than those in the residential scenario. Formaldehyde (on average 135 μg m^-3) and acrolein (28 μg m^-3) exceeded the acute 1-h exposure REL for the highest emitting vaporizer/voltage combination. Predictions for these compounds also exceeded the 8-h REL in several bars when less intense vaping conditions were considered. Benzene concentrations in a few bars approached the 8-h REL, and diacetyl levels were close to the lower limit for occupational exposures. The integrated health damage from passive vaping was derived by computing disability-adjusted life years (DALYs) lost due to exposure to secondhand vapor. Acrolein was the dominant contributor to the aggregate harm. DALYs for the various device/voltage combinations were lower than-or comparable to-those estimated for exposures to secondhand and thirdhand tobacco smoke.

AHRR (cg05575921) hypomethylation marks smoking behaviour, morbidity and mortality

RATIONALE AND OBJECTIVES

Self-reported smoking underestimates disease risk. Smoking affects DNA methylation, in particular the cg05575921 site in the aryl hydrocarbon receptor repressor (AHRR) gene. We tested the hypothesis that AHRR cg05575921 hypomethylation is associated with risk of smoking-related morbidity and mortality.

METHODS

From the Copenhagen City Heart Study representing the Danish general population, we studied 9234 individuals. Using bisulphite treated leucocyte DNA, AHRR (cg05575921) methylation was measured. Rs1051730 (CHRN3A) genotype was used to evaluate smoking heaviness. Participants were followed for up to 22 years for exacerbations of COPD, event of lung cancer and all-cause mortality. Six-year lung cancer risk was calculated according to the Prostate, Lung, Colorectal and Ovarian Cancer Screening Trial (PLCOM2012).

MEASUREMENTS AND MAIN RESULTS

AHRR (cg05575921) hypomethylation was associated with former and current smoking status, high daily and cumulative smoking, short time since smoking cessation (all p values <7×10-31), and the smoking-related CHRN3A genotype (-0.48% per T-allele, p=0.002). The multifactorially adjusted HRs for the lowest versus highest methylation quintiles were 4.58 (95% CI 2.83 to 7.42) for COPD exacerbations, 4.87 (2.31 to 10.3) for lung cancer and 1.67 (1.48 to 1.88) for all-cause mortality. Finally, among 2576 high-risk smokers eligible for lung cancer screening by CT, observed cumulative incidences of lung cancer after 6 years for individuals in the lowest and highest methylation quintiles were 3.7% and 0.0% (p=2×10-7), whereas predicted PLCOM2012 6-year risks were similar (4.3% and 4.4%, p=0.77).

CONCLUSION

AHRR (cg05575921) hypomethylation, a marker of smoking behaviour, provides potentially clinical relevant predictions of future smoking-related morbidity and mortality.

Influence of cigarette circumference on smoke chemistry, biological activity, and smoking behaviour

Cigarettes with reduced circumference are increasingly popular in some countries, hence it is important to understand the effects of circumference reduction on their burning behaviour, smoke chemistry and bioactivity. Reducing circumference reduces tobacco mass burn rate, puff count and static burn time, and increases draw resistance and rod length burned during puff and smoulder periods. Smoulder temperature increases with decreasing circumference, but with no discernible effect on cigarette ignition propensity during a standard test. At constant packing density, mainstream (MS) and sidestream (SS) tar and nicotine yields decrease approximately linearly with decreasing circumference, as do the majority of smoke toxicants. However, volatile aldehydes, particularly formaldehyde, show a distinctly non-linear relationship with circumference and increases in the ratios of aldehydes to tar and nicotine have been observed as the circumference decreases. Mutagenic, cytotoxic and tumorigenic specific activities of smoke condensates (i.e. per unit weight of condensate) decrease as circumference decreases. Recent studies suggest that there is no statistical difference in mouth-level exposure to tar and nicotine among smokers of cigarettes with different circumferences. Commercially available slim cigarettes usually have changes in other cigarette design features compared with cigarettes with standard circumference, so it is difficult to isolate the effect of circumference on the properties of commercial products. However, available data shows that changes in cigarette circumference offer no discernible change to the harm associated with smoking.

Predicting lung dosimetry of inhaled particleborne benzo[a]pyrene using physiologically based pharmacokinetic modeling

Benzo[a]pyrene (BaP) is a by-product of incomplete combustion of fossil fuels and plant/wood products, including tobacco. A physiologically based pharmacokinetic (PBPK) model for BaP for the rat was extended to simulate inhalation exposures to BaP in rats and humans including particle deposition and dissolution of absorbed BaP and renal elimination of 3-hydroxy benzo[a]pyrene (3-OH BaP) in humans. The clearance of particle-associated BaP from lung based on existing data in rats and dogs suggest that the process is bi-phasic. An initial rapid clearance was represented by BaP released from particles followed by a slower first-order clearance that follows particle kinetics. Parameter values for BaP-particle dissociation were estimated using inhalation data from isolated/ventilated/perfused rat lungs and optimized in the extended inhalation model using available rat data. Simulations of acute inhalation exposures in rats identified specific data needs including systemic elimination of BaP metabolites, diffusion-limited transfer rates of BaP from lung tissue to blood and the quantitative role of macrophage-mediated and ciliated clearance mechanisms. The updated BaP model provides very good prediction of the urinary 3-OH BaP concentrations and the relative difference between measured 3-OH BaP in nonsmokers versus smokers. This PBPK model for inhaled BaP is a preliminary tool for quantifying lung BaP dosimetry in rat and humans and was used to prioritize data needs that would provide significant model refinement and robust internal dosimetry capabilities.

Comparison of the impact of the Tobacco Heating System 2.2 and a cigarette on indoor air quality

The impact of the Tobacco Heating System 2.2 (THS 2.2) on indoor air quality was evaluated in an environmentally controlled room using ventilation conditions recommended for simulating "Office", "Residential" and "Hospitality" environments and was compared with smoking a lit-end cigarette (Marlboro Gold) under identical experimental conditions. The concentrations of eighteen indoor air constituents (respirable suspended particles (RSP) < 2.5 μm in diameter), ultraviolet particulate matter (UVPM), fluorescent particulate matter (FPM), solanesol, 3-ethenylpyridine, nicotine, 1,3-butadiene, acrylonitrile, benzene, isoprene, toluene, acetaldehyde, acrolein, crotonaldehyde, formaldehyde, carbon monoxide, nitrogen oxide, and combined oxides of nitrogen) were measured. In simulations evaluating THS 2.2, the concentrations of most studied analytes did not exceed the background concentrations determined when non-smoking panelists were present in the environmentally controlled room under equivalent conditions. Only acetaldehyde and nicotine concentrations were increased above background concentrations in the "Office" (3.65 and 1.10 μg/m(3)), "Residential" (5.09 and 1.81 μg/m(3)) and "Hospitality" (1.40 and 0.66 μg/m(3)) simulations, respectively. Smoking Marlboro Gold resulted in greater increases in the concentrations of acetaldehyde (58.8, 83.8 and 33.1 μg/m(3)) and nicotine (34.7, 29.1 and 34.6 μg/m(3)) as well as all other measured indoor air constituents in the "Office", "Residential" and "Hospitality" simulations, respectively.

Vocal fold ion transport and mucin expression following acrolein exposure

The vocal fold epithelium is exposed to inhaled particulates including pollutants during breathing in everyday environments. Yet, our understanding of the effects of pollutants on vocal fold epithelial function is extremely limited. The objective of this study was to investigate the effect of the pollutant acrolein on two vocal fold epithelial mechanisms: ion transport and mucin (MUC) synthesis. These mechanisms were chosen as each plays a critical role in vocal defense and in maintaining surface hydration which is necessary for optimal voice production. Healthy, native porcine vocal folds (N = 85) were excised and exposed to an acrolein or sham challenge. A 60-min acrolein, but not sham challenge significantly reduced ion transport and inhibited cyclic adenosine monophosphate-dependent, increases in ion transport. Decreases in ion transport were associated with reduced sodium absorption. Within the same timeline, no significant acrolein-induced changes in MUC gene or protein expression were observed. These results improve our understanding of the effects of acrolein on key vocal fold epithelial functions and inform the development of future investigations that seek to elucidate the impact of a wide range of pollutant exposures on vocal fold health.