Inhaled sildenafil nanocomposites: lung accumulation and pulmonary pharmacokinetics

Advances in the potential of nebulized inhalation for the treatment of pulmonary arterial hypertension

Pulmonary hypertension is a pathophysiologic manifestation of a heterogeneous group of diseases, with the main pathophysiologic mechanisms being persistent pulmonary vasoconstriction and irreversible vascular remodeling. The impact significantly affects the prognosis of patients with pulmonary hypertension. If it is not treated and intervened in time, it may lead to right ventricular failure and further endanger the patient's life. Within the past decade or so, nebulized inhalation therapy is considered to have advantages in the treatment of pulmonary hypertension as a safe, limited, and rapid therapy, for example, inhaled vasodilators (prostate analogs, nitroglycerin, carbon monoxide analogs sildenafil, and nitroprusside), inhaled anti-inflammatory and antiproliferative agents (simvastatin, and selatinib), and inhaled peroxides (levocetirizine) have been recognized as emerging therapeutic approaches in the treatment of pulmonary hypertension as emerging therapeutic approaches. Therefore, this article provides a brief review of recent advances in the potential of nebulized inhaled vasodilators, anti-inflammatory and antiproliferative agents, and anti-peroxides for the treatment of pulmonary hypertension, with the aim of providing different therapeutic options for the treatment of pulmonary hypertension, enhancing the quality of survival, alleviating symptoms, and improving the prognosis of patients with this condition.

Formulation and evaluation of inhaled Sildenafil-loaded PLGA microparticles for treatment of pulmonary arterial hypertension (PAH): A novel high drug loaded formulation and scalable process via hot melt extrusion technology (Part Ⅰ)

In recent years, several techniques were employed to develop a local sustained pulmonary delivery of sildenafil citrate (SC) as an alternative for the intravenous and oral treatment of pulmonary arterial hypertension (PAH). Most of these methods, however, need to be improved due to limitations of scalability, low yield production, low drug loading, and stability issues. In this study, we report the use of hot-melt extrusion (HME) as a scalable process for making Poly (lactic-co-glycolic acid) (PLGA) microparticles with high SC load. The prepared particles were tested in vitro for local drug delivery to the lungs by inhalation. Sodium bicarbonate was included as a porogen in the formulation to make the particles more brittle and to impart favorable aerodynamic properties. Six formulations were prepared with different formulation compositions. Laser diffraction analysis was used to estimate the geometric particle size distribution of the microparticles. In-vitro aerodynamic performance was evaluated by the next-generation cascade impactor (NGI). It was reported in terms of an emitted dose (ED), an emitted fraction (EF%), a respirable fraction (RF%), a fine particle fraction (FPF%), a mass median aerodynamic diameter (MMAD), and geometric standard deviation (GSD). The formulations have also been characterized for surface morphology, entrapment efficiency, drug load, and in-vitro drug release. The results demonstrated that PLGA microparticles have a mean geometric particle size between 6 and 14 µm, entrapment efficiency of 77 to 89 %, and SC load between 17 and 33 % w/w. Fifteen percent of entrapped sildenafil was released over 24 h from the PLGA microparticles, and seventy percent over 7 days. The aerodynamic properties included fine particle fraction ranging between 19 and 33 % and an average mass median aerodynamic diameter of 6-13 µm.

Advanced formulations and nanotechnology-based approaches for pulmonary delivery of sildenafil: A scoping review

Oral sildenafil (SDF) is used to treat pulmonary arterial hypertension (PAH), and its bioavailability is approximately 40%. Several formulations of nano and microparticles (for pulmonary delivery) are being developed because it is possible to improve characteristics such as release time, bioavailability, dose, frequency, and even directly target the drug to the lungs. This review summarizes the latest SDF drug delivery systems for PAH and explains challenges related to the development, the preclinical, and the clinical studies. A scoping review was conducted by searching electronic databases including PubMed, Scopus, and Web of Science to identify studies published between 2001 and 2021. From 300 articles found, 31 met the inclusion criteria. This review identified colloidal formulations such as polymeric, lipid, and metal-organic framework nanoparticles. Strategies were determined to reach the deep airways such as polymeric microparticles, large porous microparticles, nanocomposites, and nano in microparticles. Finally, aspects related to toxicological, pharmacokinetics, and gaps in information for potential use in humans were discussed. SDF formulations are significant candidates for the treatment of PAH by inhalation. In summation, future preclinical studies are still required in large animals, as there is no particular formulation yet submitted to clinical studies.

Manipulation of Spray-Drying Conditions to Develop an Inhalable Ivermectin Dry Powder

SARS-CoV-2, the causative agent of COVID-19, predominantly affects the respiratory tract. As a consequence, it seems intuitive to develop antiviral agents capable of targeting the virus right on its main anatomical site of replication. Ivermectin, a U.S. FDA-approved anti-parasitic drug, was originally shown to inhibit SARS-CoV-2 replication in vitro, albeit at relatively high concentrations, which is difficult to achieve in the lung. In this study, we tested the spray-drying conditions to develop an inhalable dry powder formulation that could ensure sufficient antiviral drug concentrations, which are difficult to achieve in the lungs based on the oral dosage used in clinical trials. Here, by using ivermectin as a proof-of-concept, we evaluated spray-drying conditions that could lead to the development of antivirals in an inhalable dry powder formulation, which could then be used to ensure sufficient drug concentrations in the lung. Thus, we used ivermectin in proof-of-principle experiments to evaluate our system, including physical characterization and in vitro aerosolization of prepared dry powder. The ivermectin dry powder was prepared with a mini spray-dryer (Buchi B-290), using a 23 factorial design and manipulating spray-drying conditions such as feed concentration (0.2% w/v and 0.8% w/v), inlet temperature (80 °C and 100 °C) and presence/absence of L-leucine (0% and 10%). The prepared dry powder was in the size range of 1−5 μm and amorphous in nature with wrinkle morphology. We observed a higher fine particle fraction (82.5 ± 1.4%) in high feed concentration (0.8% w/v), high inlet temperature (100 °C) and the presence of L-leucine (10% w/w). The stability study conducted for 28 days confirmed that the spray-dried powder was stable at 25 ± 2 °C/<15% RH and 25 ± 2 °C/ 53% RH. Interestingly, the ivermectin dry powder formulation inhibited SARS-CoV-2 replication in vitro with a potency similar to ivermectin solution (EC50 values of 15.8 µM and 14.1 µM, respectively), with a comparable cell toxicity profile in Calu-3 cells. In summary, we were able to manipulate the spray-drying conditions to develop an effective ivermectin inhalable dry powder. Ongoing studies based on this system will allow the development of novel formulations based on single or combinations of drugs that could be used to inhibit SARS-CoV-2 replication in the respiratory tract.

An Update on Advancements and Challenges in Inhalational Drug Delivery for Pulmonary Arterial Hypertension

A lethal condition at the arterial–alveolar juncture caused the exhaustive remodeling of pulmonary arterioles and persistent vasoconstriction, followed by a cumulative augmentation of resistance at the pulmonary vascular and, consequently, right-heart collapse. The selective dilation of the pulmonary endothelium and remodeled vasculature can be achieved by using targeted drug delivery in PAH. Although 12 therapeutics were approved by the FDA for PAH, because of traditional non-specific targeting, they suffered from inconsistent drug release. Despite available inhalation delivery platforms, drug particle deposition into the microenvironment of the pulmonary vasculature and the consequent efficacy of molecules are influenced by pathophysiological conditions, the characteristics of aerosolized mist, and formulations. Uncertainty exists in peripheral hemodynamics outside the pulmonary vasculature and extra-pulmonary side effects, which may be further exacerbated by underlying disease states. The speedy improvement of arterial pressure is possible via the inhalation route because it has direct access to pulmonary arterioles. Additionally, closed particle deposition and accumulation in diseased tissues benefit the restoration of remolded arterioles by reducing fallacious drug deposition in other organs. This review is designed to decipher the pathological changes that should be taken into account when targeting the underlying pulmonary endothelial vasculature, especially with regard to inhaled particle deposition in the alveolar vasculature and characteristic formulations.

Lyoprotective Effects of Mannitol and Lactose Compared to Sucrose and Trehalose: Sildenafil Citrate Liposomes as a Case Study

The lyoprotective effects of mannitol and lactose have been evaluated in the production of sildenafil citrate liposomes. Liposomes were prepared by mixing the components under ultrasonic agitation, followed by a transmembrane pH gradient for remote drug loading. Mannitol and lactose, as compared to sucrose and trehalose, were used as the stabilizing agents, and different freeze-drying cycles were assayed. The remaining moisture and the thermal characteristics of the lyophilized samples were analyzed. Size, entrapment efficiency, biocompatibility, and cell internalization of original and rehydrated liposomes were compared. The type of additive did not affect the biocompatibility or cell internalization, but did influence other liposome attributes, including the thermal characteristics and the remaining moisture of the lyophilized samples. A cut-off of 5% (w/w) remaining moisture was an indicator of primary drying completion-information useful for scaling up and transfer from laboratory to large-scale production. Lactose increased the glass transition temperature to over 70 °C, producing lyoprotective effects similar to those obtained with sucrose. Based on these results, formulations containing liposomes lyophilized with lactose meet the FDA's requirements and can be used as a biocompatible and biodegradable vehicle for the pulmonary delivery of therapeutic doses of sildenafil citrate.

Formulation and optimization of sildenafil citrate-loaded PLGA large porous microparticles using spray freeze-drying technique: A factorial design and in-vivo pharmacokinetic study

The oral administration of sildenafil citrate (SC) for the treatment of pulmonary arterial hypertension is associated with several drawbacks. The study aimed to design and formulate SC-loaded inhalable poly (lactic-co-glycolic acid) [PLGA] large porous microparticles (LPMs) for pulmonary delivery. A factorial design was used to study the effect of the composition of LPMs on physicochemical properties. The study also evaluated the effect of glucose and L-leucine concentration on the formulation. The developed LPMs demonstrated an acceptable yield% (≤48%), large geometric particle size (>5µm) with a spherical and porous surface, and sustained drug release (up to 48 h). Increasing the concentration of poly(ethyleneimine) from 0.5% to 1% in SC-loaded LPMs led to an increase in entrapment efficiency from ~3.02% to ~94.48%. The optimum LPMs showed adequate aerodynamic properties with a 97.68 ± 1.07% recovery, 25.33 ± 3.32% fine particle fraction, and low cytotoxicity. Intratracheal administration of LPMs demonstrated significantly higher lung deposition, systemic bioavailability, and longer retention time (p < 0.05) compared to orally administered Viagra® tablets. The study concluded that SC-loaded LPMs could provide better therapeutic efficacy, reduced dosing frequency, and enhanced patient compliance.

Formulation and evaluation of carrier-free dry powder inhaler containing sildenafil

Pulmonary delivery of sildenafil for the treatment of pulmonary arterial hypertension could overcome the limitations of intravenous and oral administration routes, such as poor patient compliance and systemic side effects. In this study, a carrier-free dry powder inhaler (DPI) formulation was developed, using spray drying technique and L-leucine as a dispersibility enhancer. Sildenafil citrate salt and sildenafil free base were evaluated for drug transport using a Calu-3 cell model, and their suitability for DPI production by spray drying was tested. Characteristics of the resultant carrier-free DPI powders were examined, namely crystallinity, morphology, size distribution, density, zeta potential, and aerodynamic performance. A Box-Behnken design was adopted to optimize the formulation and process conditions, including leucine amount, fraction of methanol in spraying solvent, and inlet temperature. While both sildenafil forms exhibited sufficient permeability for lung absorption, only sildenafil base resulted in DPI powders which were stable for 6 months. The introduction of leucine into the formulations effectively enhanced aerodynamic performance of the powders and particles with favorable size, shape, and density were produced. The optimal DPI formulation determined from experimental design possesses excellent aerodynamic performance with 89.39% emitted dose and 80.08% fine particle fraction, indicating the possibility of incorporating sildenafil into carrier-free DPIs for pulmonary delivery.

Nanostructured lipid carriers versus solid lipid nanoparticles for the potential treatment of pulmonary hypertension via nebulization

With the non-selective vasodilating action, short half-life and first-pass metabolism of sildenafil (SC), local application in the lung for pulmonary arterial hypertension is of high demand. Although several nanosystems have been lately investigated, nanostructured lipid carriers (NLCs) give promises of potential safety, biodegradability and controlled drug release. In the current study, NLCs comprising either precirol, stearic acid or beeswax as solid lipid in presence of oleic acid as liquid lipid and PVA or poloxamer as emulsifier were prepared. Optimized NLCs (200-268 nm in size) were appraised versus SLNs both in vitro and in vivo. Precirol/PVA-based SLNs and NLCs ensued high entrapment efficiencies (EE > 95%) and controlled release behaviour over 6 h even though NLCs showed higher release profile. Stability studies at 4 °C indicated potential colloidal and entrapment stability over 3 months. Interestingly, NLCs demonstrated efficient nebulization, low interaction with mucin and higher viability of A549 cells (3-fold increase in IC₅₀ relative to SLNs) providing good aptitudes for pulmonary application. In vivo administration of free SC in rats revealed localized intra-alveolar bleeding, presumably related to excessive vasodilatation. Meanwhile, the nanoencapsulated drug confirmed normal lung parenchyma with minimal incidence of bleeding. Inspiring results highlight the potential of sildenafil-laden nanostructured lipid carriers as pulmonary drug delivery system.

Design of ciprofloxacin-loaded nano-and microcomposite particles for dry powder inhaler formulations: preparation, in vitro characterisation, and antimicrobial efficacy

In this study, ciprofloxacin hydrochloride (CIP)-loaded poly-ε-caprolactone (PCL) nanoparticles were prepared for pulmonary administration. CIP-loaded PCL nanoparticles were prepared using solid-in-oil-in-water (s/o/w) emulsion solvent evaporation method, and the effects of various formulation parameters on the physicochemical properties of the nanoparticles were investigated. PCL nanoparticles showed spherical shapes with particle sizes around 143-489 nm. Encapsulation efficiency was found to be very low because of water-solubility properties of CIP. However, the surface modification of nanoparticles with chitosan caused an increase in the encapsulation efficiency of nanoparticles. At drug release study, CIP-loaded PCL nanoparticles showed initial burst effect for 4 h and then continuously released for 72 h. Nanocomposite microparticles containing CIP-loaded PCL nanoparticles were prepared freeze-drying method and mannitol was used as carrier material. Tapped density and MMADt results show that nanocomposite microparticles have suitable aerodynamic properties for pulmonary administration. Antimicrobial efficacy investigations showed that CIP-encapsulated PCL nanoparticles and nanocomposite microparticles inhibited the growth of bacteria. Also, when the antimicrobial activity of the nanoparticles at the beginning and at the sixth month was examined, it was found that the structure of the particulate system was still preserved. These results indicated that nanocomposite microparticles containing CIP-loaded PCL nanoparticles can be used for pulmonary delivery.

Sildenafil Citrate Liposomes for Pulmonary Delivery by Ultrasonic Nebulization

Technological advances in lipid vesicles facilitate optimization of their properties to achieve therapeutic goals and promote alternative drug administration routes. Sildenafil citrate (SC) is orally administered for the treatment of pulmonary hypertension, but local release would be advantageous in terms of efficacy and safety. In the present study, liposomes from egg phosphatidylcholine and cholesterol loaded with SC, with and without d-α-tocopheryl polyethylene glycol 1000 succinate (Vit E TPGS), were prepared by sonication of the components. A transmembrane pH gradient was applied for active loading of liposomes, and the size, zeta potential, and entrapment efficiency (EE%) were determined. The liposomes were lyophilized and then nebulized. The nebulized samples were collected and the EE% was determined. The transmembrane pH gradient produced a significant increase in the EE% (from 17.68 ± 4.25% to 89.77 ± 7.64%) and, after lyophilization, the EE% remained the same as that of the originals, but the size and zeta potential were modified. EE% of liposomes decreased upon nebulization, particularly for those with Vit E TPGS. Thus, the additives used for lyoprotection reduced the impact of nebulization. Additional studies are essential, but according to these results, SC-loaded liposomes can be considered as suitable and safe carriers for the local release of sildenafil in the pulmonary system.

Development of dry powder inhaler containing tadalafil-loaded PLGA nanoparticles

Inhalable dry powders containing poly lactic-co-glycolic acid (PLGA) nanoparticles (NPs) were developed for the delivery of tadalafil (TAD) for treatment of life-treating pulmonary arterial hypertension. Taguchi design was employed to evaluate the effects of different formulation variables on the physicochemical characteristics of PLGA-NPs prepared using emulsion solvent evaporation method. Inhalable PLGA-NPs of TAD were successfully prepared by co-spray drying the PLGA-NPs with inert carriers. Physicochemical characteristics and in vitro deposition of the aerosolized drug were also evaluated. The optimized formulation was prepared using 7.5 mg of PLGA, 2.5 mg of TAD, sonication time of 6 min and 2% polyvinyl alcohol (PVA) as the stabilizer. The optimized aqueous/oil phase ratio for PLGA-NPs preparation was 10:1. Polymer/drug ratio was the most effective parameter on the release efficiency. Encapsulation efficiency, zeta potential and particle size of PLGA-NPs were more affected by aqueous/organic phase ratio. The spray dried powders containing PLGA-NPs had a mass median aerodynamic diameter (MMAD) in the range of 1.4–2.8 μm that was suitable for TAD delivery to the deep region of lung. The presence of L- leucine in mannitol containing formulations decreased the interparticulate forces between particles and increased significantly the process yield and fine particle fraction (FPF). The results indicated that prepared dry powders containing TAD-loaded PLGA-NPs were suitable for inhalation and has the potential for the treatment of pulmonary arterial hypertension.