Mid-infrared spectroscopy predictions as indicator traits in breeding programs for enhanced coagulation properties of milk

Predicting milk protein fractions using infrared spectroscopy and a gradient boosting machine for breeding purposes in Holstein cattle

In recent years, increasing attention has been focused on the genetic evaluation of protein fractions in cow milk with the aim of improving milk quality and technological characteristics. In this context, advances in high-throughput phenotyping by Fourier transform infrared (FTIR) spectroscopy offer the opportunity for large-scale, efficient measurement of novel traits that can be exploited in breeding programs as indicator traits. We took milk samples from 2,558 Holstein cows belonging to 38 herds in northern Italy, operating under different production systems. Fourier transform infrared spectra were collected on the same day as milk sampling and stored for subsequent analysis. Two sets of data (i.e., phenotypes and FTIR spectra) collected in 2 different years (2013 and 2019-2020) were compiled. The following traits were assessed using HPLC: true protein, major casein fractions [α_S1-casein (CN), α_S2-CN, β-CN, κ-CN, and glycosylated-κ-CN], and major whey proteins (β-lactoglobulin and α-lactalbumin), all of which were measured both in grams per liter (g/L) and proportion of total nitrogen (% N). The FTIR predictions were calculated using the gradient boosting machine technique and tested by 3 different cross-validation (CRV) methods. We used the following CRV scenarios: (1) random 10-fold, which randomly split the whole into 10-folds of equal size (9-folds for training and 1-fold for validation); (2) herd/date-out CRV, which assigned 80% of herd/date as the training set with independence of 20% of herd/date assigned as the validation set; (3) forward/backward CRV, which split the data set in training and validation set according with the year of milk sampling (FTIR and gold standard data assessed in 2013 or 2019-2020) using the "old" and "new" databases for training and validation, and vice-versa with independence among them; (4) the CRV for genetic parameters (CRV-gen), where animals without pedigree as assigned as a fixed training population and animals with pedigree information was split in 5-folds, in which 1-fold was assigned to the fixed training population, and 4-folds were assigned to the validation set (independent from the training set). The results (i.e., measures and predictions) of CRV-gen were used to infer the genetic parameters for gold standard laboratory measurements (i.e., proteins assessed with HPLC) and FTIR-based predictions considering the CRV-gen scenario from a bi-trait animal model using single-step genomic BLUP. We found that the prediction accuracies of the gradient boosting machine equations differed according to the way in which the proteins were expressed, achieving higher accuracy when expressed in g/L than when expressed as % N in all CRV scenarios. Concerning the reproducibility of the equations over the different years, the results showed no relevant differences in predictive ability between using "old" data as the training set and "new" data as the validation set and vice-versa. Comparing the additive genetic variance estimates for milk protein fractions between the FTIR predicted and HPLC measures, we found reductions of -19.7% for milk protein fractions expressed in g/L, and -21.19% expressed as % N. Although we found reductions in the heritability estimates, they were small, with values ranging from -1.9 to -7.25% for g/L, and -1.6 to -7.9% for % N. The posterior distributions of the additive genetic correlations (r_a) between the FTIR predictions and the laboratory measurements were generally high (>0.8), even when the milk protein fractions were expressed as % N. Our results show the potential of using FTIR predictions in breeding programs as indicator traits for the selection of animals to enhance milk protein fraction contents. We expect acceptable responses to selection due to the high genetic correlations between HPLC measurements and FTIR predictions.

Predictions of Milk Fatty Acid Contents by Mid-Infrared Spectroscopy in Chinese Holstein Cows

Genetic improvement of milk fatty acid content traits in dairy cattle is of great significance. However, chromatography-based methods to measure milk fatty acid content have several disadvantages. Thus, quick and accurate predictions of various milk fatty acid contents based on the mid-infrared spectrum (MIRS) from dairy herd improvement (DHI) data are essential and meaningful to expand the amount of phenotypic data available. In this study, 24 kinds of milk fatty acid concentrations were measured from the milk samples of 336 Holstein cows in Shandong Province, China, using the gas chromatography (GC) technique, which simultaneously produced MIRS values for the prediction of fatty acids. After quantification by the GC technique, milk fatty acid contents expressed as g/100 g of milk (milk-basis) and g/100 g of fat (fat-basis) were processed by five spectral pre-processing algorithms: first-order derivative (DER1), second-order derivative (DER2), multiple scattering correction (MSC), standard normal transform (SNV), and Savitzky-Golsy convolution smoothing (SG), and four regression models: random forest regression (RFR), partial least square regression (PLSR), least absolute shrinkage and selection operator regression (LassoR), and ridge regression (RidgeR). Two ranges of wavebands (4000~400 cm^-1 and 3017~2823 cm^-1/1805~1734 cm^-1) were also used in the above analysis. The prediction accuracy was evaluated using a 10-fold cross validation procedure, with the ratio of the training set and the test set as 3:1, where the determination coefficient (R²) and residual predictive deviation (RPD) were used for evaluations. The results showed that 17 out of 31 milk fatty acids were accurately predicted using MIRS, with RPD values higher than 2 and R² values higher than 0.75. In addition, 16 out of 31 fatty acids were accurately predicted by RFR, indicating that the ensemble learning model potentially resulted in a higher prediction accuracy. Meanwhile, DER1, DER2 and SG pre-processing algorithms led to high prediction accuracy for most fatty acids. In summary, these results imply that the application of MIRS to predict the fatty acid contents of milk is feasible.

Multivariate and Genome-Wide Analysis of Mid-Infrared Spectra of Non-Coagulating Milk of Sarda Sheep Breed

Milk coagulation ability is crucial for the dairy sheep industry since the whole amount of milk is processed into cheese. Non-coagulating milk (NCM) is defined as milk not forming a curd within the testing time. In sheep milk, it has been reported in literature that up to 20% of milk is NCM. Although the clotting properties of individual milk have been widely studied, little attention has been given to NCM and genomic dissection of this trait. Mid-infrared (MIR) spectra can be exploited both to predict cheese-making aptitude and to discriminate between coagulating milk and NCM. The main goals of this work were (i) to assess the predictivity of MIR spectra for NCM classification and (ii) to conduct a genome-wide association study on coagulation ability. Milk samples from 949 Sarda ewes genotyped and phenotyped for milk coagulation properties (MCPs) served as the training dataset. The validation dataset included 662 ewes. Three classical MCPs were measured: rennet coagulation time (RCT), curd firmness (a30), and curd firming time (k20). Moreover, MIR spectra were acquired and stored in the region between 925.92 and 5,011.54 cm−1. The probability of a sample to be NCM was modeled by step-wise logistic regression on milk spectral information (LR-W), logistic regression on principal component (LR-PC), and canonical discriminant analysis of spectral wave number (DA-W). About 9% of the samples did not coagulate at 30 min. The use of LR-W gave a poorer classification of NCM. The use of LR-PC improved the percentage of correct assignment (45 ± 9%). The DA-W method allows us to reach 75.1 ± 10.3 and 76.5 ± 18.4% of correct assignments of the inner and external validation datasets, respectively. As far as GWA of NCM, 458 SNP associations and 45 candidate genes were detected. The genes retrieved from public databases were mostly linked to mammary gland metabolism, udder health status, and a milk compound also known to affect the ability of milk to coagulate. In particular, the potential involvement of CAPNs deserves further investigation.

Challenging Sustainable and Innovative Technologies in Cheese Production: A Review

It is well known that cheese yield and quality are affected by animal genetics, milk quality (chemical, physical, and microbiological), production technology, and the type of rennet and dairy cultures used in production. Major differences in the same type of cheese (i.e., hard cheese) are caused by the rennet and dairy cultures, which affect the ripening process. This review aims to explore current technological advancements in animal genetics, methods for the isolation and production of rennet and dairy cultures, along with possible applications of microencapsulation in rennet and dairy culture production, as well as the challenge posed to current dairy technologies by the preservation of biodiversity. Based on the reviewed scientific literature, it can be concluded that innovative approaches and the described techniques can significantly improve cheese production.

Application of Optical Quality Control Technologies in the Dairy Industry: An Overview

Sustainable development of the agricultural industry, in particular, the production of milk and feed for farm animals, requires accurate, fast, and non-invasive diagnostic tools. Currently, there is a rapid development of a number of analytical methods and approaches that meet these requirements. Infrared spectrometry in the near and mid-IR range is especially widespread. Progress has been made not only in the physical methods of carrying out measurements, but significant advances have also been achieved in the development of mathematical processing of the received signals. This review is devoted to the comparison of modern methods and devices used to control the quality of milk and feed for farm animals.

Comparison of Single-Breed and Multi-Breed Training Populations for Infrared Predictions of Novel Phenotypes in Holstein Cows

In general, Fourier-transform infrared (FTIR) predictions are developed using a single-breed population split into a training and a validation set. However, using populations formed of different breeds is an attractive way to design cross-validation scenarios aimed at increasing prediction for difficult-to-measure traits in the dairy industry. This study aimed to evaluate the potential of FTIR prediction using training set combining specialized and dual-purpose dairy breeds to predict different phenotypes divergent in terms of biological meaning, variability, and heritability, such as body condition score (BCS), serum β-hydroxybutyrate (BHB), and kappa casein (k-CN) in the major cattle breed, i.e., Holstein-Friesian. Data were obtained from specialized dairy breeds: Holstein (468 cows) and Brown Swiss (657 cows), and dual-purpose breeds: Simmental (157 cows), Alpine Grey (75 cows), and Rendena (104 cows), giving a total of 1461 cows from 41 multi-breed dairy herds. The FTIR prediction model was developed using a gradient boosting machine (GBM), and predictive ability for the target phenotype in Holstein cows was assessed using different cross-validation (CV) strategies: a within-breed scenario using 10-fold cross-validation, for which the Holstein population was randomly split into 10 folds, one for validation and the remaining nine for training (10-fold_HO); an across-breed scenario (BS_HO) where the Brown Swiss cows were used as the training set and the Holstein cows as the validation set; a specialized multi-breed scenario (BS+HO_10-fold), where the entire Brown Swiss and Holstein populations were combined then split into 10 folds, and a multi-breed scenario (Multi-breed), where the training set comprised specialized (Holstein and Brown Swiss) and dual-purpose (Simmental, Alpine Grey, and Rendena) dairy cows, combined with nine folds of the Holstein cows. Lastly a Multi-breed CV2 scenario was implemented, assuming the same number of records as the reference scenario and using the same proportions as the multi-breed. Within-Holstein, FTIR predictions had a predictive ability of 0.63 for BCS, 0.81 for BHB, and 0.80 for k-CN. Using a specific breed (Brown Swiss) as the training set for prediction in the Holstein population reduced the prediction accuracy by 10% for BCS, 7% for BHB, and 11% for k-CN. Notably, the combination of Holstein and Brown Swiss cows in the training set increased the predictive ability of the model by 6%, which was 0.66 for BCS, 0.85 for BHB, and 0.87 for k-CN. Using multiple specialized and dual-purpose animals in the training set outperforms the 10-fold_HO (standard) approach, with an increase in predictive ability of 8% for BCS, 7% for BHB, and 10% for k-CN. When the Multi-breed CV2 was implemented, no improvement was observed. Our findings suggest that FTIR prediction of different phenotypes in the Holstein breed can be improved by including different specialized and dual-purpose breeds in the training population. Our study also shows that predictive ability is enhanced when the size of the training population and the phenotypic variability are increased.

The Effect of Humic Mineral Substances from Oxyhumolite on the Coagulation Properties and Mineral Content of the Milk of Holstein-Friesian Cows

The study was conducted to determine the effect of humic mineral substances from oxyhumolite added to the diet of Holstein-Friesian cows on the coagulation properties, proximate chemical composition, and mineral profile of milk. The experiment was conducted on 64 cows divided into two groups of 32 each, control (CON) and experimental (H). The group H cows received the humic mineral substances as feed additive, containing 65% humic acids, for 60 days (100 g cow/day). Milk samples were collected twice, after 30 and 60 days. After 30 days no significant changes were observed in the chemical composition, somatic cell count (SCC), mineral content (except potassium), or curd texture parameters. However, the coagulation properties improved. The milk from group H after both 30 and 60 days coagulated significantly (15%) faster on average (p < 0.05), and the curd was about 36% and 28% firmer after 30 and 60 days, respectively (p < 0.05). After 60 days there was an increase in the content of fat (by 0.27 p.p.; p = 0.041), protein (by 0.14 p.p.; p = 0.012), and casein (by 0.12 p.p.; p = 0.029). SCC decreased by 20% (p = 0.023). The curds were significantly harder and less fracturable compared to the control. Calcium and iron content increased as well. The results indicate that humic mineral substances from oxyhumolite in the diet of cows can improve the suitability of milk for cheese production.

Predicting cow milk quality traits from routinely available milk spectra using statistical machine learning methods

Numerous statistical machine learning methods suitable for application to highly correlated features, as those that exist for spectral data, could potentially improve prediction performance over the commonly used partial least squares approach. Milk samples from 622 individual cows with known detailed protein composition and technological trait data accompanied by mid-infrared spectra were available to assess the predictive ability of different regression and classification algorithms. The regression-based approaches were partial least squares regression (PLSR), ridge regression (RR), least absolute shrinkage and selection operator (LASSO), elastic net, principal component regression, projection pursuit regression, spike and slab regression, random forests, boosting decision trees, neural networks (NN), and a post-hoc approach of model averaging (MA). Several classification methods (i.e., partial least squares discriminant analysis (PLSDA), random forests, boosting decision trees, and support vector machines (SVM)) were also used after stratifying the traits of interest into categories. In the regression analyses, MA was the best prediction method for 6 of the 14 traits investigated [curd firmness at 60 min, α_S1-casein (CN), α_S2-CN, κ-CN, α-lactalbumin, and β-lactoglobulin B], whereas NN and RR were the best algorithms for 3 traits each (rennet coagulation time, curd-firming time, and heat stability, and curd firmness at 30 min, β-CN, and β-lactoglobulin A, respectively), PLSR was best for pH, and LASSO was best for CN micelle size. When traits were divided into 2 classes, SVM had the greatest accuracy for the majority of the traits investigated. Although the well-established PLSR-based method performed competitively, the application of statistical machine learning methods for regression analyses reduced the root mean square error compared with PLSR from between 0.18% (κ-CN) to 3.67% (heat stability). The use of modern statistical machine learning methods for trait prediction from mid-infrared spectroscopy may improve the prediction accuracy for some traits.

Evaluating the performance of machine learning methods and variable selection methods for predicting difficult-to-measure traits in Holstein dairy cattle using milk infrared spectral data

Fourier-transform infrared (FTIR) spectroscopy is a powerful high-throughput phenotyping tool for predicting traits that are expensive and difficult to measure in dairy cattle. Calibration equations are often developed using standard methods, such as partial least squares (PLS) regression. Methods that employ penalization, rank-reduction, and variable selection, as well as being able to model the nonlinear relations between phenotype and FTIR, might offer improvements in predictive ability and model robustness. This study aimed to compare the predictive ability of 2 machine learning methods, namely random forest (RF) and gradient boosting machine (GBM), and penalized regression against PLS regression for predicting 3 phenotypes differing in terms of biological meaning and relationships with milk composition (i.e., phenotypes measurable directly and not directly in milk, reflecting different biological processes which can be captured using milk spectra) in Holstein-Friesian cattle under 2 cross-validation scenarios. The data set comprised phenotypic information from 471 Holstein-Friesian cows, and 3 target phenotypes were evaluated: (1) body condition score (BCS), (2) blood β-hydroxybutyrate (BHB, mmol/L), and (3) κ-casein expressed as a percentage of nitrogen (κ-CN, % N). The data set was split considering 2 cross-validation scenarios: samples-out random in which the population was randomly split into 10-folds (8-folds for training and 1-fold for validation and testing); and herd/date-out in which the population was randomly assigned to training (70% herd), validation (10%), and testing (20% herd) based on the herd and date in which the samples were collected. The random grid search was performed using the training subset for the hyperparameter optimization and the validation set was used for the generalization of prediction error. The trained model was then used to assess the final prediction in the testing subset. The grid search for penalized regression evidenced that the elastic net (EN) was the best regularization with increase in predictive ability of 5%. The performance of PLS (standard model) was compared against 2 machine learning techniques and penalized regression using 2 cross-validation scenarios. Machine learning methods showed a greater predictive ability for BCS (0.63 for GBM and 0.61 for RF), BHB (0.80 for GBM and 0.79 for RF), and κ-CN (0.81 for GBM and 0.80 for RF) in samples-out cross-validation. Considering a herd/date-out cross-validation these values were 0.58 (GBM and RF) for BCS, 0.73 (GBM and RF) for BHB, and 0.77 (GBM and RF) for κ-CN. The GBM model tended to outperform other methods in predictive ability around 4%, 1%, and 7% for EN, RF, and PLS, respectively. The prediction accuracies of the GBM and RF models were similar, and differed statistically from the PLS model in samples-out random cross-validation. Although, machine learning techniques outperformed PLS in herd/date-out cross-validation, no significant differences were observed in terms of predictive ability due to the large standard deviation observed for predictions. Overall, GBM achieved the highest accuracy of FTIR-based prediction of the different phenotypic traits across the cross-validation scenarios. These results indicate that GBM is a promising method for obtaining more accurate FTIR-based predictions for different phenotypes in dairy cattle.

Integrating genomic and infrared spectral data improves the prediction of milk protein composition in dairy cattle

Background

Over the past decade, Fourier transform infrared (FTIR) spectroscopy has been used to predict novel milk protein phenotypes. Genomic data might help predict these phenotypes when integrated with milk FTIR spectra. The objective of this study was to investigate prediction accuracy for milk protein phenotypes when heterogeneous on-farm, genomic, and pedigree data were integrated with the spectra. To this end, we used the records of 966 Italian Brown Swiss cows with milk FTIR spectra, on-farm information, medium-density genetic markers, and pedigree data. True and total whey protein, and five casein, and two whey protein traits were analyzed. Multiple kernel learning constructed from spectral and genomic (pedigree) relationship matrices and multilayer BayesB assigning separate priors for FTIR and markers were benchmarked against a baseline partial least squares (PLS) regression. Seven combinations of covariates were considered, and their predictive abilities were evaluated by repeated random sub-sampling and herd cross-validations (CV).

Results

Addition of the on-farm effects such as herd, days in milk, and parity to spectral data improved predictions as compared to those obtained using the spectra alone. Integrating genomics and/or the top three markers with a large effect further enhanced the predictions. Pedigree data also improved prediction, but to a lesser extent than genomic data. Multiple kernel learning and multilayer BayesB increased predictive performance, whereas PLS did not. Overall, multilayer BayesB provided better predictions than multiple kernel learning, and lower prediction performance was observed in herd CV compared to repeated random sub-sampling CV.

Conclusions

Integration of genomic information with milk FTIR spectral can enhance milk protein trait predictions by 25% and 7% on average for repeated random sub-sampling and herd CV, respectively. Multiple kernel learning and multilayer BayesB outperformed PLS when used to integrate heterogeneous data for phenotypic predictions.

Prediction of meat quality traits in the abattoir using portable near-infrared spectrometers: heritability of predicted traits and genetic correlations with laboratory-measured traits

Background

The possibility of assessing meat quality traits over the meat chain is strongly limited, especially in the context of selective breeding which requires a large number of phenotypes. The main objective of this study was to investigate the suitability of portable infrared spectrometers for phenotyping beef cattle aiming to genetically improving the quality of their meat. Meat quality traits (pH, color, water holding capacity, tenderness) were appraised on rib eye muscle samples of 1,327 Piemontese young bulls using traditional (i.e., reference/gold standard) laboratory analyses; the same traits were also predicted from spectra acquired at the abattoir on the intact muscle surface of the same animals 1 d after slaughtering. Genetic parameters were estimated for both laboratory measures of meat quality traits and their spectra-based predictions.

Results

The prediction performances of the calibration equations, assessed through external validation, were satisfactory for color traits (R² from 0.52 to 0.80), low for pH and purge losses (R² around 0.30), and very poor for cooking losses and tenderness (R² below 0.20). Except for lightness and purge losses, the heritability estimates of most of the predicted traits were lower than those of the measured traits while the genetic correlations between measured and predicted traits were high (average value 0.81).

Conclusions

Results showed that NIRS predictions of color traits, pH, and purge losses could be used as indicator traits for the indirect genetic selection of the reference quality phenotypes. Results for cooking losses were less effective, while the NIR predictions of tenderness were affected by a relatively high uncertainty of estimate. Overall, genetic selection of some meat quality traits, whose direct phenotyping is difficult, can benefit of the application of infrared spectrometers technology.

Breed of goat affects the prediction accuracy of milk coagulation properties using Fourier-transform infrared spectroscopy

The prediction of traditional goat milk coagulation properties (MCP) and curd firmness over time (CF_t) parameters via Fourier-transform infrared (FTIR) spectroscopy can be of significant economic interest to the dairy industry and can contribute to the breeding objectives for the genetic improvement of dairy goat breeds. Therefore, the aims of this study were to (1) explore the variability of milk FTIR spectra from 4 goat breeds (Camosciata delle Alpi, Murciano-Granadina, Maltese, and Sarda), and to assess the possible discriminant power of milk FTIR spectra among breeds, (2) assess the viability to predict coagulation traits by using milk FTIR spectra, and (3) quantify the effect of the breed on the prediction accuracy of MCP and CF_t parameters. In total, 611 individual goat milk samples were used. Analysis of variance of measured MCP and CF_t parameters was carried out using a mixed model including the farm and pendulum as random factors, and breed, parity, and days in milk as fixed factors. Milk spectra for each goat were collected over the spectral range from wavenumber 5,011 to 925 × cm^-1. Discriminant analysis of principal components was used to assess the ability of FTIR spectra to identify breed of origin. A Bayesian model was used to calibrate equations for each coagulation trait. The accuracy of the model and the prediction equation was assessed by cross-validation (CRV; 80% training and 20% testing set) and stratified CRV (SCV; 3 breeds in the training set, one breed in the testing set) procedures. Prediction accuracy was assessed by using coefficient of determination of validation (R²_VAL), the root mean square error of validation (RMSE_VAL), and the ratio performance deviation. Moreover, measured and FTIR predicted traits were compared in the SCV procedure by assessing their least squares means for the breed effect, Pearson correlations, and variance heteroscedasticity. Results showed the feasibility of using FTIR spectra and multivariate analyses to correctly assign milk samples to their breeds of origin. The R²_VAL values obtained with the CRV procedure were moderate to high for the majority of coagulation traits, with RMSE_VAL and ratio performance deviation values increasing as the coagulation process progresses from rennet addition. Prediction accuracy obtained with the SCV were strongly influenced by the breed, presenting general low values restricting a practical application. In addition, the low Pearson correlation coefficients of Sarda breed for all the traits analyzed, and the heteroscedastic variances of Camosciata delle Alpi, Murciano-Granadina, and Maltese breeds, further indicated that it is fundamental to consider the differences existing among breeds for the prediction of milk coagulation traits.

Fourier Transform Infrared Spectroscopy as a Tool to Study Milk Composition Changes in Dairy Cows Attributed to Housing Modifications to Improve Animal Welfare

Animal welfare status is assessed today through visual evaluations requiring an on-farm visit. A convenient alternative would be to detect cow welfare status directly in milk samples, already routinely collected for milk recording. The objective of this study was to propose a novel approach to demonstrate that Fourier transform infrared (FTIR) spectroscopy can detect changes in milk composition related to cows subjected to movement restriction at the tie stall with four tie-rail configurations varying in height and position (TR1, TR2, TR3 and TR4). Milk mid-infrared spectra were collected on weekly basis. Long-term average spectra were calculated for each cow using spectra collected in weeks 8-10 of treatment. Principal component analysis was applied to spectral averages and the scores of principal components (PCs) were tested for treatment effect by mixed modelling. PC7 revealed a significant treatment effect (p = 0.01), particularly for TR3 (configuration with restricted movement) vs. TR1 (recommended configuration) (p = 0.03). The loading spectrum of PC7 revealed high loadings at wavenumbers that could be assigned to biomarkers related to negative energy balance, such as β-hydroxybutyrate, citrate and acetone. This observation suggests that TR3 might have been restrictive for cows to access feed. Milk FTIR spectroscopy showed promising results in detecting welfare status and housing conditions in dairy cows.

The use of milk mid-infrared spectroscopy to improve genomic prediction accuracy of serum biomarkers

Breeding objectives in the dairy industry have shifted from being solely focused on production to including fertility, animal health, and environmental impact. Increased serum concentrations of candidate biomarkers of health and fertility, such as β-hydroxybutyric acid (BHB), fatty acids, and urea are difficult and costly to measure, and thus limit the number of records. Accurate genomic prediction requires a large reference population. The inclusion of milk mid-infrared (MIR) spectroscopic predictions of biomarkers may increase genomic prediction accuracy of these traits. Our objectives were to (1) estimate the heritability of, and genetic correlations between, selected serum biomarkers and their respective MIR predictions, and (2) evaluate genomic prediction accuracies of either only measured serum traits, or serum traits plus MIR-predicted traits. The MIR-predicted traits were either fitted in a single trait model, assuming the measured trait and predicted trait were the same trait, or in a multitrait model, where measured and predicted trait were assumed to be correlated traits. We performed all analyses using relationship matrices constructed from pedigree (A matrix), genotypes (G matrix), or both pedigree and genotypes (H matrix). Our data set comprised up to 2,198 and 9,657 Holstein cows with records for serum biomarkers and MIR-predicted traits, respectively. Heritabilities of measured serum traits ranged from 0.04 to 0.07 for BHB, from 0.13 to 0.21 for fatty acids, and from 0.10 to 0.12 for urea. Heritabilities for MIR-predicted traits were not significantly different from those for the measured traits. Genetic correlations between measured traits and MIR-predicted traits were close to 1 for urea. For BHB and fatty acids, genetic correlations were lower and had large standard errors. The inclusion of MIR predicted urea substantially increased prediction accuracy for urea. For BHB, including MIR-predicted BHB reduced the genomic prediction accuracy, whereas for fatty acids, prediction accuracies were similar with either measured fatty acids, MIR-predicted fatty acids, or both. The high genetic correlation between urea and MIR-predicted urea, in combination with the increased prediction accuracy, demonstrated the potential of using MIR-predicted urea for genomic prediction of urea. For BHB and fatty acids, further studies with larger data sets are required to obtain more accurate estimates of genetic correlations.

Predicting the Content of 20 Minerals in Beef by Different Portable Near-Infrared (NIR) Spectrometers

The aim of this study was to test the predictability of a detailed mineral profile of beef using different portable near-infrared spectrometers (NIRS). These devices are rapid, chemical waste-free, cheap, nondestructive tools that can be used directly on the meat surface in the work environment without the need to take samples. We compared a transportable Visible-NIRS (weight 5.6 kg; wavelength 350-1830 nm), a portable NIRS (2.0 kg; 950-1650 nm), and a hand-held Micro-NIRS (0.06 kg; 905-1649 nm) to predict the contents of 20 minerals (measured by ICP-OES) in 178 beef samples (Longissimus thoracis muscle) using different mathematical pretreatments of the spectra and partial least square regressions. The externally validated results show that Fe, P, Mg, S, Na, and Pb have some potential for prediction with all instruments (R2VAL: 0.40-0.83). Overall, the prediction performances of the three instruments were similar, although the smallest (Micro-NIRS) exhibited certain advantages.

Integration of Wet-Lab Measures, Milk Infrared Spectra, and Genomics to Improve Difficult-to-Measure Traits in Dairy Cattle Populations

The objective of this study was to evaluate the contribution of Fourier-transformed infrared spectroscopy (FTIR) data for dairy cattle breeding through two different approaches: (i) estimating the genetic parameters for 30 measured milk traits and their FTIR predictions and investigating the additive genetic correlation between them and (ii) evaluating the effectiveness of FTIR-derived phenotyping to replicate a candidate bull’s progeny testing or breeding value prediction at birth. Records were available from 1,123 cows phenotyped using gold standard laboratory methodologies (LAB data). This included phenotypes related to fine milk composition and milk technological characteristics, milk acidity, and milk protein fractions. The dataset used to generate FTIR predictions comprised 729,202 test-day records from 51,059 Brown Swiss cows (FIELD data). A first approach consisted of estimating genetic parameters for phenotypes available from LAB and FIELD datasets. To do so, a set of bivariate animal models were run, and genetic correlations between LAB and FIELD phenotypes were estimated using FIELD information obtained at the population level. Heritability estimates were generally higher for FIELD predictions than for the corresponding LAB measures. The additive genetic correlations (r_a) between LAB and FIELD phenotypes had different magnitudes across traits but were generally strong. Overall, these results demonstrated the potential of using FIELD information as indicator traits for the indirect genetic improvement of LAB measures. In the second approach, we included genotype information for 1,011 cows from the LAB dataset, 1,493 cows from the FIELD dataset, 181 sires with daughters in both LAB and FIELD datasets, and 540 sires with daughters in the FIELD dataset only. Predictions were obtained using the single-step GBLUP method. A four fold cross-validation was used to assess the predictive ability of the different models, assessed as the ability to predict masked LAB records from daughters of progeny testing bulls. The correlation between observed and predicted LAB measures in validation was averaged over the four training-validation sets. Different sets of phenotypic information were used sequentially in cross-validation schemes: (i) LAB cows from the training set; (ii) FIELD cows from the training set; and (iii) FIELD cows from the validation set. Models that included FIELD records showed an improvement for the majority of traits. This study suggests that breeding programs for difficult-to-measure traits could be implemented using FTIR information. While these programs should use progeny testing, acceptable values of accuracy can be achieved also for bulls without phenotyped progeny. Robust calibration equations are, deemed as essential.

The evolving role of Fourier-transform mid-infrared spectroscopy in genetic improvement of dairy cattle

Over the last 100 years, significant advances have been made in the characterisation of milk composition for dairy cattle improvement programs. Technological progress has enabled a shift from labour intensive, on-farm collection and processing of samples that assess yield and fat levels in milk, to large-scale processing of samples through centralised laboratories, with the scope extended to include quantification of other traits. Fourier-transform mid-infrared (FT-MIR) spectroscopy has had a significant role in the transformation of milk composition phenotyping, with spectral-based predictions of major milk components already being widely used in milk payment and animal evaluation systems globally. Increasingly, there is interest in analysing the individual FT-MIR wavenumbers, and in utilising the FT-MIR data to predict other novel traits of importance to breeding programs. This includes traits related to the nutritional value of milk, the processability of milk into products such as cheese, and traits relevant to animal health and the environment. The ability to successfully incorporate these traits into breeding programs is dependent on the heritability of the FT-MIR predicted traits, and the genetic correlations between the FT-MIR predicted and actual trait values. Linking FT-MIR predicted traits to the underlying mutations responsible for their variation can be difficult because the phenotypic expression of these traits are a function of a diverse range of molecular and biological mechanisms that can obscure their genetic basis. The individual FT-MIR wavenumbers give insights into the chemical composition of milk and provide an additional layer of granularity that may assist with establishing causal links between the genome and observed phenotypes. Additionally, there are other molecular phenotypes such as those related to the metabolome, chromatin accessibility, and RNA editing that could improve our understanding of the underlying biological systems controlling traits of interest. Here we review topics of importance to phenotyping and genetic applications of FT-MIR spectra datasets, and discuss opportunities for consolidating FT-MIR datasets with other genomic and molecular data sources to improve future dairy cattle breeding programs.

Combining Fourier Transform Mid-Infrared Spectroscopy with Chemometric Methods to Detect Adulterations in Milk Powder

Adulteration is one of the major concerns among all the quality problems of milk powder. Soybean flour and rice flour are harmless adulterations in the milk powder. In this study, mid-infrared spectroscopy was used to detect the milk powder adulterated with rice flour or soybean flour and simultaneously determine the adulterations content. Partial least squares (PLS), support vector machine (SVM) and extreme learning machine (ELM) were used to establish classification and regression models using full spectra and optimal wavenumbers. ELM models using the optimal wavenumbers selected by principal component analysis (PCA) loadings obtained good results with all the sensitivity and specificity over 90%. Regression models using the full spectra and the optimal wavenumbers selected by successive projections algorithm (SPA) obtained good results, with coefficient of determination (R2) of calibration and prediction all over 0.9 and the predictive residual deviation (RPD) over 3. The classification results of ELM models and the determination results of adulterations content indicated that the mid-infrared spectroscopy was an effective technique to detect the rice flour and soybean flour adulteration in the milk powder. This study would help to apply mid-infrared spectroscopy to the detection of adulterations such as rice flour and soybean flour in real-world conditions.

Comparison of Bayesian and partial least squares regression methods for mid-infrared prediction of cheese-making properties in Montbéliarde cows

Assessing the cheese-making properties (CMP) of milks with a rapid and cost-effective method is of particular interest for the Protected Designation of Origin cheese sector. The aims of this study were to evaluate the potential of mid-infrared (MIR) spectra to estimate coagulation and acidification properties, as well as curd yield (CY) traits of Montbéliarde cow milk. Samples from 250 cows were collected in 216 commercial herds in Franche-Comté with the objectives to maximize the genetic diversity as well as the variation in milk composition. All coagulation and CY traits showed high variability (10 to 43%). Reference analyses performed for soft (SC) and pressed cooked (PCC) cheese technology were matched with MIR spectra. Prediction models were built on 446 informative wavelengths not tainted by the water absorbance, using different approaches such as partial least squares (PLS), uninformative variable elimination PLS, random forest PLS, Bayes A, Bayes B, Bayes C, and Bayes RR. We assessed equation performances for a set of 20 CMP traits (coagulation: 5 for SC and 4 for PCC; acidification: 5 for SC and 3 for PCC; laboratory CY: 3) by comparing prediction accuracies based on cross-validation. Overall, variable selection before PLS did not significantly improve the performances of the PLS regression, the prediction differences between Bayesian methods were negligible, and PLS models always outperformed Bayesian models. This was likely a result of the prior use of informative wavelengths of the MIR spectra. The best accuracies were obtained for curd yields expressed in dry matter (CY_DM) or fresh (CY_FRESH) and for coagulation traits (curd firmness for PCC and SC) using the PLS regression. Prediction models of other CMP traits were moderately to poorly accurate. Whatever the prediction methodology, the best results were always obtained for CY traits, probably because these traits are closely related to milk composition. The CY_DM predictions showed coefficient of determination (R²) values up to 0.92 and 0.87, and RS_y,x values of 3 and 4% for PLS and Bayes regressions, respectively. Finally, we divided the data set into calibration (2/3) and validation (1/3) sets and developed prediction models in external validation using PLS regression only. In conclusion, we confirmed, in the validation set, an excellent prediction for CY_DM [R² = 0.91, ratio of performance to deviation (RPD) = 3.39] and a very good prediction for CY_FRESH (R² = 0.84, RPD = 2.49), adequate for analytical purposes. We also obtained good results for both PCC and SC curd firmness traits (R² ≥ 0.70, RPD ≥1.8), which enable quantitative prediction.

Genetic relationships of lactose and freezing point with minerals and coagulation traits predicted from milk mid-infrared spectra in Holstein cows

The aim of the present study was to assess the relationships of lactose percentage (LP), lactose yield (LY), and freezing point (FRP) with minerals and coagulation properties predicted from mid-infrared spectra in bovine milk. To achieve this purpose, we analyzed 54,263 test-day records of 4,297 Holstein cows to compute (co)variance components with a linear repeatability animal model. Parity, stage of lactation, season of calving, and herd-test-date were included as fixed effects in the model, and additive genetic animal, within- and across-lactation permanent environment, and residual were included as random effects. Lactose percentage was more heritable (0.405 ± 0.027) than LY (0.121 ± 0.021) and FRP (0.132 ± 0.014). Heritabilities (± standard error) of predicted milk minerals varied from 0.375 ± 0.027 for Na to 0.531 ± 0.028 for P, and those of milk coagulation properties ranged from 0.348 ± 0.052 for rennet coagulation time to 0.430 ± 0.026 for curd firming time. Lactose percentage showed favorable (negative) genetic correlations with milk somatic cell score (SCS) and FRP, and it was almost uncorrelated with casein-related minerals (Ca and P) and coagulation properties. Moreover, LP was strongly correlated with Na (-0.783 ± 0.022), a mineral known to increase in the presence of intramammary infection (IMI) and high somatic cell count. Indeed, Na is the main osmotic replacer of lactose in mastitic milk when the blood-milk barrier is altered during IMI. Being strongly associated with milk yield, LY did not favorably correlate with coagulation properties, likely because of the negative correlation of this trait with protein and casein percentages. Milk FRP presented moderate and null genetic associations with Na and SCS, respectively. Results of the present study suggest that the moderate heritability of LP and its genetic correlations with IMI-related traits (Na and SCS) could be exploited for genetic selection against mastitis. Moreover, selection for LP would not impair milk coagulation characteristics or Ca and P content, which are important for cheesemaking.

A landscape of the heritability of Fourier-transform infrared spectral wavelengths of milk samples by parity and lactation stage in Holstein cows

Fourier-transform near- and mid-infrared (FTIR) milk spectral data are routinely collected in many countries worldwide. Establishing an optimal strategy to use spectral data in genetic evaluations requires knowledge of the heritabilities of individual FTIR wavelength absorbances. Previous FTIR heritability estimates have been based on relatively small sample sizes and have not considered the possibility that heritability may vary across parities and stages of the lactation. We used data from ∼370,000 test-day records of Canadian Holstein cows to produce a landscape of the heritability of FTIR spectra, 1,060 wavelengths in the near- and mid-infrared spectrum (5,011-925 cm^-1), by parity and month of the lactation (mo 1 to 3 and mo 1 to 6, respectively). The 2 regions of the spectrum associated with absorption of electromagnetic energy by water molecules were estimated to have very high phenotypic variances, very low heritabilities, and very low proportion of variance explained by herd-year-season (HYS) subclasses. The near- or short-wavelength infrared (SWIR: 5,066-3,672 cm^-1) region was also characterized by low heritability estimates, whereas the estimated proportion of the variance explained by HYS was high. The mid-wavelength infrared region (MWIR: 3,000-2,500 cm^-1) and the transition between mid and long-wavelength infrared region (MWIR-LWIR: 1,500-925 cm^-1) harbor several waves characterized by moderately high (≥0.4) heritabilities. Most of the high-heritability regions contained wavelengths that are reported to be associated with important milk metabolites and components. Interestingly, these 2 same regions tended to show more variability in heritabilities between parity and lactation stage. Second parity showed heritability patterns that were distinctly different from those of the first and third parities, whereas the first 2 mo of the lactation had clearly distinct heritability patterns compared with mo 3 to 6.

A 100-Year Review: Identification and genetic selection of economically important traits in dairy cattle

Over the past 100 yr, the range of traits considered for genetic selection in dairy cattle populations has progressed to meet the demands of both industry and society. At the turn of the 20th century, dairy farmers were interested in increasing milk production; however, a systematic strategy for selection was not available. Organized milk performance recording took shape, followed quickly by conformation scoring. Methodological advances in both genetic theory and statistics around the middle of the century, together with technological innovations in computing, paved the way for powerful multitrait analyses. As more sophisticated analytical techniques for traits were developed and incorporated into selection programs, production began to increase rapidly, and the wheels of genetic progress began to turn. By the end of the century, the focus of selection had moved away from being purely production oriented toward a more balanced breeding goal. This shift occurred partly due to increasing health and fertility issues and partly due to societal pressure and welfare concerns. Traits encompassing longevity, fertility, calving, health, and workability have now been integrated into selection indices. Current research focuses on fitness, health, welfare, milk quality, and environmental sustainability, underlying the concentrated emphasis on a more comprehensive breeding goal. In the future, on-farm sensors, data loggers, precision measurement techniques, and other technological aids will provide even more data for use in selection, and the difficulty will lie not in measuring phenotypes but rather in choosing which traits to select for.

Rennet-induced coagulation of raw and heated camel and cow milk gels determined by instrumental techniques: effects of added calcium and phosphate

BACKGROUND

The potentiality of the front-face fluorescence spectroscopy and rheological measurements combined with chemometric tools to characterise the structure evolution during coagulation of raw and preheated camel and cow milk at 50 and 70 °C with/without added calcium and phosphate was evaluated. Tryptophan and vitamin A fluorescence spectra were collected during the gelation of milk at 0, 10, 20, 30, 40, and 45 min after the addition of rennet-induced coagulation. In parallel, the storage modulus (G'), loss modulus (G″) and tan delta (tan δ) were determined using low amplitude oscillation shear analysis.

RESULTS

The principal component analysis (PCA) applied to the normalised tryptophan spectra allowed the gels made with camel milk to be differentiated from those of cow milk on the one hand, and to monitor protein structure modifications during the gelation, on the other hand. The common components and specific weights analysis (CCSWA) applied jointly to the fluorescence and rheological data sets permitted a clear separation of raw milk gels from those preheated at 50 and 70 °C.

CONCLUSION

The front-face fluorescence spectroscopy method coupled with multi-variate statistical analyses showed a high capacity for studying changes in the micelle structure throughout the rennet-induced coagulation process. © 2017 Society of Chemical Industry.

Standardization of milk mid-infrared spectrometers for the transfer and use of multiple models

An increasing number of models are being developed to provide information from milk Fourier transform mid-infrared (FT-MIR) spectra on fine milk composition, technological properties of milk, or even cows' physiological status. In this context, and to take advantage of these existing models, the purpose of this work was to evaluate whether a spectral standardization method can enable the use of multiple equations within a network of different FT-MIR spectrometers. The piecewise direct standardization method was used, matching "slave" instruments to a common reference, the "master." The effect of standardization on network reproducibility was assessed on 66 instruments from 3 different brands by comparing the spectral variability of the slaves and the master with and without standardization. With standardization, the global Mahalanobis distance from the slave spectra to the master spectra was reduced on average from 2,655.9 to 14.3, representing a significant reduction of noninformative spectral variability. The transfer of models from instrument to instrument was tested using 3 FT-MIR models predicting (1) the quantity of daily methane emitted by dairy cows, (2) the concentration of polyunsaturated fatty acids in milk, and (3) the fresh cheese yield. The differences, in terms of root mean squared error, between master predictions and slave predictions were reduced after standardization on average from 103 to 17 g/d, from 0.0315 to 0.0045 g/100 mL of milk, and from 2.55 to 0.49 g of curd/100 g of milk, respectively. For all the models, standard deviations of predictions among all the instruments were also reduced by 5.11 times for methane, 5.01 times for polyunsaturated fatty acids, and 7.05 times for fresh cheese yield, showing an improvement of prediction reproducibility within the network. Regarding the results obtained, spectral standardization allows the transfer and use of multiple models on all instruments as well as the improvement of spectral and prediction reproducibility within the network. The method makes the models universal, thereby offering opportunities for data exchange and the creation and use of common robust models at an international level to provide more information to the dairy sector from direct analysis of milk.

Comparison of Bayesian regression models and partial least squares regression for the development of infrared prediction equations

The objective of this study was to compare the prediction accuracy of 92 infrared prediction equations obtained by different statistical approaches. The predicted traits included fatty acid composition (n = 1,040); detailed protein composition (n = 1,137); lactoferrin (n = 558); pH and coagulation properties (n = 1,296); curd yield and composition obtained by a micro-cheese making procedure (n = 1,177); and Ca, P, Mg, and K contents (n = 689). The statistical methods used to develop the prediction equations were partial least squares regression (PLSR), Bayesian ridge regression, Bayes A, Bayes B, Bayes C, and Bayesian least absolute shrinkage and selection operator. Model performances were assessed, for each trait and model, in training and validation sets over 10 replicates. In validation sets, Bayesian regression models performed significantly better than PLSR for the prediction of 33 out of 92 traits, especially fatty acids, whereas they yielded a significantly lower prediction accuracy than PLSR in the prediction of 8 traits: the percentage of C18:1n-7 trans-9 in fat; the content of unglycosylated κ-casein and its percentage in protein; the content of α-lactalbumin; the percentage of α_S2-casein in protein; and the contents of Ca, P, and Mg. Even though Bayesian methods produced a significant enhancement of model accuracy in many traits compared with PLSR, most variations in the coefficient of determination in validation sets were smaller than 1 percentage point. Over traits, the highest predictive ability was obtained by Bayes C even though most of the significant differences in accuracy between Bayesian regression models were negligible.

Prediction of milk fatty acid content with mid-infrared spectroscopy in Canadian dairy cattle using differently distributed model development sets

The fatty acid profile of milk is a prevailing issue due to the potential negative or positive effects of different fatty acids to human health and nutrition. Mid-infrared spectroscopy can be used to obtain predictions of otherwise costly fatty acid phenotypes in a widespread and rapid manner. The objective of this study was to evaluate the prediction of fatty acid content for the Canadian dairy cattle population from mid-infrared spectral data and to compare the results produced by altering the partial least squares (PLS) model development set used. The PLS model development sets used to develop the predictions were reference fatty acids expressed as (1) grams per 100 g of fatty acid, (2) grams per 100 g of milk, (3) the natural logarithmic transform of grams per 100 g of milk, and (4) subsets of samples randomly selected by removing excess records around the mean to present a more uniform distribution, repeated 10 times. Gas chromatography measured fatty acid concentration and spectral data for 2,023 milk samples of 373 cows from 4 breeds and 44 herds were used in the model development. The coefficient of determination of cross-validation (R_cv²) increased when fatty acids were expressed on a per 100 g of milk basis compared with on a per 100 g of fat basis for all examined fatty acids. The logarithmic transformation used to create a more Gaussian distribution in the development set had little effect on the prediction accuracy. The individual fatty acids C12:0, C14:0, C16:0, C18:0, C18:1n-9 cis, and saturated, monounsaturated, unsaturated, short-chain, medium-chain, and long-chain fatty acid groups had (R_cv²) greater than 0.70. When model development was performed with subsets of the original samples, slight increases in (R_cv²) values were observed for the majority of fatty acids. The difference in (R_cv²) between the top- and bottom-performing prediction equation across the different subsets for a single predicted fatty acid was on average 0.055 depending on which samples were randomly selected to be used in the PLS model development set. Predictions for fatty acids with high accuracies can be used to monitor fatty acid contents for cows in milk recording programs and possibly for genetic evaluation.

Genome-wide association study for cheese yield and curd nutrient recovery in dairy cows

Cheese production and consumption are increasing in many countries worldwide. As a result, interest has increased in strategies for genetic selection of individuals for technological traits of milk related to cheese yield (CY) in dairy cattle breeding. However, little is known about the genetic background of a cow's ability to produce cheese. Recently, a relatively large panel (1,264 cows) of different measures of individual cow CY and milk nutrient and energy recoveries in the cheese (REC) became available. Genetic analyses showed considerable variation for CY and for aptitude to retain high proportions of fat, protein, and water in the coagulum. For the dairy industry, these characteristics are of major economic importance. Nevertheless, use of this knowledge in dairy breeding is hampered by high costs, intense labor requirement, and lack of appropriate technology. However, in the era of genomics, new possibilities are available for animal breeding and genetic improvement. For example, identification of genomic regions involved in cow CY might provide potential for marker-assisted selection. The objective of this study was to perform genome-wide association studies on different CY and REC measures. Milk and DNA samples from 1,152 Italian Brown Swiss cows were used. Three CY traits expressing the weight (wt) of fresh curd (%CY_CURD), curd solids (%CY_SOLIDS), and curd moisture (%CY_WATER) as a percentage of weight of milk processed, and 4 REC (REC_FAT, REC_PROTEIN, REC_SOLIDS, and REC_ENERGY, calculated as the % ratio between the nutrient in curd and the corresponding nutrient in processed milk) were analyzed. Animals were genotyped with the Illumina BovineSNP50 Bead Chip v.2. Single marker regressions were fitted using the GenABEL R package (genome-wide association using mixed model and regression-genomic control). In total, 103 significant associations (88 single nucleotide polymorphisms) were identified in 10 chromosomes (2, 6, 9, 11, 12, 14, 18, 19, 27, 28). For REC_FAT and REC_PROTEIN, high significance peaks were identified in Bos taurus autosome (BTA) 6 and BTA11, respectively. Marker ARS-BFGL-NGS-104610 (∼104.3 Mbp) was highly associated with REC_PROTEIN and Hapmap52348-rs29024684 (∼87.4 Mbp), closely located to the casein genes on BTA6, with REC_FAT. Genomic regions identified may enhance marker-assisted selection in bovine cheese breeding beyond the use of protein (casein) and fat contents, whereas new knowledge will help to unravel the genomic background of a cow's ability for cheese production.

Breed of cow and herd productivity affect milk composition and modeling of coagulation, curd firming, and syneresis

Milk coagulation properties (MCP) have been widely investigated in the past using milk collected from different cattle breeds and herds. However, to our knowledge, no previous studies have assessed MCP in individual milk samples from several multi-breed herds characterized by either high or low milk productivity, thereby allowing the effects of herd and cow breed to be evaluated independently. Multi-breed herds (n=41) were classified into 2 categories based on milk productivity (high vs. low), defined according to the average milk net energy yielded daily by lactating cows. Milk samples were taken from 1,508 cows of 6 different breeds: 3 specialized dairy (Holstein-Friesian, Brown Swiss, Jersey) and 3 dual-purpose (Simmental, Rendena, Alpine Grey) breeds, and analyzed in duplicate (3,016 tests) using 2 lactodynamographs to obtain 240 curd firming (CF) measurements over 60min (1 every 15 s) for each duplicate. The 5 traditional single-point MCP (RCT, k₂₀, a₃₀, a₄₅, and a₆₀) were yielded directly by the instrument from the available CF measures. All 240 CF measures of each replicate were also used to estimate 4 individual equation parameters: RCT estimated according to curd firm change over time modeling (RCT_eq), asymptotic potential curd firmness (CF_P), curd firming instant rate constant (k_CF), and syneresis instant rate constant (k_SR) and 2 derived traits: maximum curd firmness achieved within 45min (CF_max) and time at achievement of CF_max (t_max) by curvilinear regression using a nonlinear procedure. Results showed that the effect of herd-date on traditional and modeled MCP was modest, ranging from 6.1% of total variance for k₂₀ to 10.7% for RCT, whereas individual animal variance was the highest, ranging from 32.0% for t_max to 82.5% for RCT_eq. The repeatability of MCP was high (>80%) for all traits except those associated with the last part of the lactodynamographic curve (i.e., a₆₀, k_SR, k_CF, and t_max: 57 to 71%). Reproducibility, taking into account the effect of instrument, was equal to or slightly lower than repeatability. Milk samples collected in farms characterized by high productivity exhibited delayed coagulation (RCT_eq: 18.6 vs. 16.3min) but greater potential curd firmness (CF_P: 76.8 vs. 71.9mm) compared with milk samples collected from low-productivity herds. Parity and days in milk influenced almost all MCP. Large differences in all MCP traits were observed among breeds, both between specialized and dual-purpose breeds and within these 2 groups of breeds, even after adjusting for milk quality and yield. Milk quality and MCP of samples from Jersey cows, and coagulation time of samples from Rendena cows were better than in milk from Holstein-Friesian cows, and intermediate results were found with the other breeds of Alpine origin. The results of this study, taking into account the intrinsic limitation of this technique, show that the effects of breed on traditional and modeled MCP are much greater than the effects of herd productivity class, parity, and DIM. Moreover, the variance in individual animals is much greater than the variance in individual herds within herd productivity class. It seems that improvement in MCP depends more on genetics (e.g., breed, selection) than on environmental and management factors.

Identification of QTL on Chromosome 18 Associated with Non-Coagulating Milk in Swedish Red Cows

Non-coagulating (NC) milk, defined as milk not coagulating within 40 min after rennet-addition, can have a negative influence on cheese production. Its prevalence is estimated at 18% in the Swedish Red (SR) cow population. Our study aimed at identifying genomic regions and causal variants associated with NC milk in SR cows, by doing a GWAS using 777k SNP genotypes and using imputed sequences to fine map the most promising genomic region. Phenotypes were available from 382 SR cows belonging to 21 herds in the south of Sweden, from which individual morning milk was sampled. NC milk was treated as a binary trait, receiving a score of one in case of non-coagulation within 40 min. For all 382 SR cows, 777k SNP genotypes were available as well as the combined genotypes of the genetic variants of αs1-β-κ-caseins. In addition, whole-genome sequences from the 1000 Bull Genome Consortium (Run 3) were available for 429 animals of 15 different breeds. From these sequences, 33 sequences belonged to SR and Finish Ayrshire bulls with a large impact in the SR cow population. Single-marker analyses were run in ASReml using an animal model. After fitting the casein loci, 14 associations at -Log10(P-value) > 6 identified a promising region located on BTA18. We imputed sequences to the 382 genotyped SR cows using Beagle 4 for half of BTA18, and ran a region-wide association study with imputed sequences. In a seven mega base-pairs region on BTA18, our strongest association with NC milk explained almost 34% of the genetic variation in NC milk. Since it is possible that multiple QTL are in strong LD in this region, 59 haplotypes were built, genetically differentiated by means of a phylogenetic tree, and tested in phenotype-genotype association studies. Haplotype analyses support the existence of one QTL underlying NC milk in SR cows. A candidate gene of interest is the VPS35 gene, for which one of our strongest association is an intron SNP in this gene. The VPS35 gene belongs to the mammary gene sets of pre-parturient and of lactating cows.

Bayesian regression models outperform partial least squares methods for predicting milk components and technological properties using infrared spectral data

The aim of this study was to assess the performance of Bayesian models commonly used for genomic selection to predict "difficult-to-predict" dairy traits, such as milk fatty acid (FA) expressed as percentage of total fatty acids, and technological properties, such as fresh cheese yield and protein recovery, using Fourier-transform infrared (FTIR) spectral data. Our main hypothesis was that Bayesian models that can estimate shrinkage and perform variable selection may improve our ability to predict FA traits and technological traits above and beyond what can be achieved using the current calibration models (e.g., partial least squares, PLS). To this end, we assessed a series of Bayesian methods and compared their prediction performance with that of PLS. The comparison between models was done using the same sets of data (i.e., same samples, same variability, same spectral treatment) for each trait. Data consisted of 1,264 individual milk samples collected from Brown Swiss cows for which gas chromatographic FA composition, milk coagulation properties, and cheese-yield traits were available. For each sample, 2 spectra in the infrared region from 5,011 to 925 cm(-1) were available and averaged before data analysis. Three Bayesian models: Bayesian ridge regression (Bayes RR), Bayes A, and Bayes B, and 2 reference models: PLS and modified PLS (MPLS) procedures, were used to calibrate equations for each of the traits. The Bayesian models used were implemented in the R package BGLR (http://cran.r-project.org/web/packages/BGLR/index.html), whereas the PLS and MPLS were those implemented in the WinISI II software (Infrasoft International LLC, State College, PA). Prediction accuracy was estimated for each trait and model using 25 replicates of a training-testing validation procedure. Compared with PLS, which is currently the most widely used calibration method, MPLS and the 3 Bayesian methods showed significantly greater prediction accuracy. Accuracy increased in moving from calibration to external validation methods, and in moving from PLS and MPLS to Bayesian methods, particularly Bayes A and Bayes B. The maximum R(2) value of validation was obtained with Bayes B and Bayes A. For the FA, C10:0 (% of each FA on total FA basis) had the highest R(2) (0.75, achieved with Bayes A and Bayes B), and among the technological traits, fresh cheese yield R(2) of 0.82 (achieved with Bayes B). These 2 methods have proven to be useful instruments in shrinking and selecting very informative wavelengths and inferring the structure and functions of the analyzed traits. We conclude that Bayesian models are powerful tools for deriving calibration equations, and, importantly, these equations can be easily developed using existing open-source software. As part of our study, we provide scripts based on the open source R software BGLR, which can be used to train customized prediction equations for other traits or populations.

Improving the prediction ability of FT-MIR spectroscopy to assess titratable acidity in cow's milk

This study investigated the potential application of Fourier transform mid-infrared spectroscopy (FT-MIR) for the determination of titratable acidity (TA) in cow's milk. The prediction model was developed on 201 samples collected from cows in early and late lactation, and was successively used to predict TA on samples collected from cows in early lactation and in samples with high somatic cell count. The root mean square error of cross-validation of the model by using external validation dataset was 0.09 °Soxhlet-Henkel/50 mL. Applying the model on milk samples from cows in early lactation or with high somatic cell count, the root mean square error of prediction was 0.163 °Soxhlet-Henkel/50 mL, with a RER and RPD of 23.9 and 5.1, respectively. Our results seem to indicate that FT-MIR can be used in individual milk samples to accurately predict TA, and has the potential to be adopted to measure routinely the TA of milk.

Invited review: overview of new traits and phenotyping strategies in dairy cattle with a focus on functional traits

For several decades, breeding goals in dairy cattle focussed on increased milk production. However, many functional traits have negative genetic correlations with milk yield, and reductions in genetic merit for health and fitness have been observed. Herd management has been challenged to compensate for these effects and to balance fertility, udder health and metabolic diseases against increased production to maximize profit without compromising welfare. Functional traits, such as direct information on cow health, have also become more important because of growing concern about animal well-being and consumer demands for healthy and natural products. There are major concerns about the impact of drugs used in veterinary medicine on the spread of antibiotic-resistant strains of bacteria that can negatively impact human health. Sustainability and efficiency are also increasingly important because of the growing competition for high-quality, plant-based sources of energy and protein. Disruptions to global environments because of climate change may encourage yet more emphasis on these traits. To be successful, it is vital that there be a balance between the effort required for data recording and subsequent benefits. The motivation of farmers and other stakeholders involved in documentation and recording is essential to ensure good data quality. To keep labour costs reasonable, existing data sources should be used as much as possible. Examples include the use of milk composition data to provide additional information about the metabolic status or energy balance of the animals. Recent advances in the use of mid-infrared spectroscopy to measure milk have shown considerable promise, and may provide cost-effective alternative phenotypes for difficult or expensive-to-measure traits, such as feed efficiency. There are other valuable data sources in countries that have compulsory documentation of veterinary treatments and drug use. Additional sources of data outside of the farm include, for example, slaughter houses (meat composition and quality) and veterinary labs (specific pathogens, viral loads). At the farm level, many data are available from automated and semi-automated milking and management systems. Electronic devices measuring physiological status or activity parameters can be used to predict events such as oestrus, and also behavioural traits. Challenges concerning the predictive biology of indicator traits or standardization need to be solved. To develop effective selection programmes for new traits, the development of large databases is necessary so that high-reliability breeding values can be estimated. For expensive-to-record traits, extensive phenotyping in combination with genotyping of females is a possibility.

Selecting the quality of mule duck fatty liver based on near-infrared spectroscopy

BACKGROUND

"Foie gras" is produced predominantly in France and about 90% of the commercialized product is obtained from male mule ducks. The melting rate (percentage of fat released during cooking) is the main criterion used to determine the quality of "foie gras". However, up to now the melting rate could not be predicted without causing liver damage, which means that selection programs could not use this criterion.

METHODS

Fatty liver phenotypes were obtained for a population of over 1400 overfed male mule ducks. The phenotypes were based on two types of near-infrared spectra (on the liver surface and on ground liver) in order to predict the melting rate and liver composition (ash, dry matter, lipid and protein contents). Genetic parameters were computed in multiple traits with a "sire-dam" model and using a Gibbs sampling approach.

RESULTS

The estimates for the genetic parameters show that the measured melting rate and the predicted melting rate obtained with two near-infrared spectrometer devices are genetically the same trait: genetic correlations are very high (ranging from +0.89 to +0.97 depending on the mule duck parental line and the spectrometer) and heritabilities are comparable. The predictions based on the spectra of ground liver samples using a laboratory spectrometer correlate with those based on the surface spectra using a portable spectrometer (from +0.83 to +0.95 for dry matter, lipid and protein content) and are particularly high for the melting rate (higher than +0.95). Although less accurate than the predictions obtained using the spectra of ground liver samples, the phenotypic prediction of the melting rate based on surface spectra is sufficiently accurate to be used by "foie gras" processors.

CONCLUSIONS

Near-infrared spectrometry is an efficient tool to select liver quality in breeding programs because animals can be ranked according to their liver melting rate without damaging their livers. Thus, these original results will help breeders to select ducks based on the liver melting rate, a crucial criterion that defines the quality of the liver and for which there was previously no accurate predictor.

Quality traits and modeling of coagulation, curd firming, and syneresis of sheep milk of Alpine breeds fed diets supplemented with rumen-protected conjugated fatty acid

The aim of this study was to test the modeling of curd-firming (CF) measures and to compare the sheep milk of 3 Alpine breeds supplemented with or without rumen-protected conjugated linoleic acid (rpCLA). Twenty-four ewes of the Brogna, Foza, and Lamon breeds were allotted to 6 pens (2 pens/breed) and fed a diet composed of corn grain, corn silage, dried sugar beet pulp, soybean meal, wheat bran, wheat straw, and a vitamin-mineral mixture. The rpCLA supplement (12 g/d per ewe plus 4 g/d for each lamb older than 30 d) was mixed into the diet of 1 pen per sheep breed (3 pens/treatment) to provide an average of 0.945 and 0.915 g/d per ewe of the cis-9,trans-11 C18:2 and trans-10,cis-12 C18:2 conjugated linoleic acid isomers, respectively. The trial started at 38 ± 23 d after parturition, and individual morning milk samples were collected on d 16, 23, 37, 44, and 59 of the trial. Milk samples were analyzed for composition, and duplicate samples were assessed for milk coagulation properties (MCP). A total of 180 CF measures for each sample (1 every 15s) were recorded. Model parameters were the rennet coagulation time, the asymptotic potential CF, the CF instant rate constant, the syneresis instant rate constant, the maximum CF achieved within 45 min (CFmax), and the time at achievement of CFmax. The data were analyzed using a hierarchical model that considered the fixed effects of breed, diet, lamb birth, and initial days in milk, which were tested on individual ewe (random) variance; the fixed effect of sampling day, which was tested on the within-ewe sample (random) variance; and the fixed effect of instrument or cuvette position (only for MCP), which was tested on the residual (replicates within samples) variance. The local Alpine sheep breeds displayed similar milk compositions, traditional MCP, and CF modeling parameters. Supplementation with rpCLA triggered changes in milk composition and worsened MCP (e.g., delayed rennet coagulation time, slower CF instant rate constant, and a doubling of syneresis instant rate constant), but did not influence potential CF. Overall, our results indicate that rpCLA supplementation reduced the actual maximum CF (CFmax) but did not modify the interval between rennet addition and CFmax or time to CFmax.

Selection for milk coagulation properties predicted by Fourier transform infrared spectroscopy in the Italian Holstein-Friesian breed

Milk coagulation is based on a series of physicochemical changes at the casein micelle level, resulting in formation of a gel. Milk coagulation properties (MCP) are relevant for cheese quality and yield, important factors for the dairy industry. They are also evaluated in herd bulk milk to reward or penalize producers of Protected Designation of Origin cheeses. The economic importance of improving MCP justifies the need to account for this trait in the selection process. A pilot study was carried out to determine the feasibility of including MCP in the selection schemes of the Italian Holstein. The MCP were predicted in 1,055 individual milk samples collected in 16 herds (66 ± 24 cows per herd) located in Brescia province (northeastern Italy) by means of Fourier transform infrared (FTIR) spectroscopy. The coefficient of determination of prediction models indicated moderate predictions for milk rennet coagulation time (RCT=0.65) and curd firmness (a₃₀=0.68), and poor predictions for curd-firming time (k₂₀=0.49), whereas the range error ratio (8.9, 6.9, and 9.5 for RCT, k₂₀, and a₃₀, respectively) indicated good practical utility of the predictive models for all parameters. Milk proteins were genotyped and casein haplotypes (αS₁-, β-, αS₂-, and κ-casein) were reconstructed. Data from 51 half-sib families (19.9 ± 16.4 daughters per sire) were analyzed by an animal model to estimate (1) the genetic parameters of predicted RCT, k₂₀, and a₃₀; (2) the breeding values for these predicted clotting variables; and (3) the effect of milk protein genotypes and casein haplotypes on predicted MCP (pMCP). This is the first study to estimate both genetic parameters and breeding values of pMCP, together with the effects of milk protein genotypes and casein haplotypes, that also considered k₂₀, probably the most important parameter for the dairy industry (because it indicates the time for the beginning of curd-cutting). Heritability of predicted RCT (0.26) and k₂₀ (0.31) were close to the average heritability described in literature, whereas the heritability of a₃₀ was higher (0.52 vs. 0.27). The effects of milk proteins were statistically significant and similar to those obtained on measured MCP. In particular, haplotypes including uncommon variants showed positive (B-I-A-B) or negative (B-A(1)-A-E) effects. Based on these findings, FTIR spectroscopy-pMCP is proposed as a potential selection criterion for the Italian Holstein.