Calibration of a Heterogeneous Brain Model Using a Subject-Specific Inverse Finite Element Approach

Traumatic axonal injury: Clinic, forensic and biomechanics perspectives

Identification of Traumatic axonal injury (TAI) is critical in clinical practice, particularly in terms of long-term prognosis, but also for medico-legal issues, to verify whether the death or the after-effects were attributable to trauma. Multidisciplinary approaches are an undeniable asset when it comes to solving these problems. The aim of this work is therefore to list the different techniques needed to identify axonal lesions and to understand the lesion mechanisms involved in their formation. Imaging can be used to assess the consequences of trauma, to identify indirect signs of TAI, to explain the patient's initial symptoms and even to assess the patient's prognosis. Three-dimensional reconstructions of the skull can highlight fractures suggestive of trauma. Microscopic and immunohistochemical techniques are currently considered as the most reliable tools for the early identification of TAI following trauma. Finite element models use mechanical equations to predict biomechanical parameters, such as tissue stresses and strains in the brain, when subjected to external forces, such as violent impacts to the head. These parameters, which are difficult to measure experimentally, are then used to predict the risk of injury. The integration of imaging data with finite element models allows researchers to create realistic and personalized computational models by incorporating actual geometry and properties obtained from imaging techniques. The personalization of these models makes their forensic approach particularly interesting.

Brain Material Properties and Integration of Arachnoid Complex for Biofidelic Impact Response for Human Head Finite Element Model

Finite element head models offer great potential to study brain-related injuries; however, at present may be limited by geometric and material property simplifications required for continuum-level human body models. Specifically, the mechanical properties of the brain tissues are often represented with simplified linear viscoelastic models, or the material properties have been optimized to specific impact cases. In addition, anatomical structures such as the arachnoid complex have been omitted or implemented in a simple lumped manner. Recent material test data for four brain regions at three strain rates in three modes of loading (tension, compression, and shear) was used to fit material parameters for a hyper-viscoelastic constitutive model. The material model was implemented in a contemporary detailed head finite element model. A detailed representation of the arachnoid trabeculae was implemented with mechanical properties based on experimental data. The enhanced head model was assessed by re-creating 11 ex vivo head impact scenarios and comparing the simulation results with experimental data. The hyper-viscoelastic model faithfully captured mechanical properties of the brain tissue in three modes of loading and multiple strain rates. The enhanced head model showed a high level of biofidelity in all re-created impacts in part due to the improved brain-skull interface associated with implementation of the arachnoid trabeculae. The enhanced head model provides an improved predictive capability with material properties based on tissue level data and is positioned to investigate head injury and tissue damage in the future.

Region-Dependent Mechanical Properties of Human Brain Tissue Under Large Deformations Using Inverse Finite Element Modeling

This study aims to facilitate intracranial simulation of traumatic events by determining the mechanical properties of different anatomical structures of the brain. Our experimental indentation paradigm used fresh, post-operative human tissue, which is highly advantageous in determining mechanical properties without being affected by postmortem time. This study employed an inverse finite element approach coupled with experimental indentation data to characterize mechanical properties of the human hippocampus (CA1, CA3, dentate gyrus), cortex white matter, and cortex grey matter. We determined that an uncoupled viscoelastic Ogden constitutive formulation was most appropriate to represent the mechanical behavior of these different regions of brain. Anatomical regions were significantly different in their mechanical properties. The cortex white matter was stiffer than cortex grey matter, and the CA1 and dentate gyrus were both stiffer than cortex grey matter. Although no sex dependency was observed, there were trends indicating that male brain regions were generally stiffer than corresponding female regions. In addition, there were no statistically significant age dependent differences. This study provides a structure-specific description of fresh human brain tissue mechanical properties, which will be an important step toward explicitly modeling the heterogeneity of brain tissue deformation during TBI through finite element modeling.

Effect of Direction and Frequency of Skull Motion on Mechanical Vulnerability of the Human Brain

Strain energy and kinetic energy in the human brain were estimated by magnetic resonance elastography (MRE) during harmonic excitation of the head, and compared to characterize the effect of loading direction and frequency on brain deformation. In brain MRE, shear waves are induced by external vibration of the skull and imaged by a modified MR imaging sequence; the resulting harmonic displacement fields are typically "inverted" to estimate mechanical properties, like stiffness or damping. However, measurements of tissue motion from MRE also illuminate key features of the response of the brain to skull loading. In this study, harmonic excitation was applied in two different directions and at five different frequencies from 20 to 90 Hz. Lateral loading induced primarily left-right head motion and rotation in the axial plane; occipital loading induced anterior-posterior head motion and rotation in the sagittal plane. The ratio of strain energy to kinetic energy (SE/KE) depended strongly on both direction and frequency. The ratio of SE/KE was approximately four times larger for lateral excitation than for occipital excitation and was largest at the lowest excitation frequencies studied. These results are consistent with clinical observations that suggest lateral impacts are more likely to cause injury than occipital or frontal impacts, and also with observations that the brain has low-frequency (∼10 Hz) natural modes of oscillation. The SE/KE ratio from brain MRE is potentially a simple and powerful dimensionless metric of brain vulnerability to deformation and injury.

Inverse identification of region-specific hyperelastic material parameters for human brain tissue

The identification of material parameters accurately describing the region-dependent mechanical behavior of human brain tissue is crucial for computational models used to assist, e.g., the development of safety equipment like helmets or the planning and execution of brain surgery. While the division of the human brain into different anatomical regions is well established, knowledge about regions with distinct mechanical properties remains limited. Here, we establish an inverse parameter identification scheme using a hyperelastic Ogden model and experimental data from multi-modal testing of tissue from 19 anatomical human brain regions to identify mechanically distinct regions and provide the corresponding material parameters. We assign the 19 anatomical regions to nine governing regions based on similar parameters and microstructures. Statistical analyses confirm differences between the regions and indicate that at least the corpus callosum and the corona radiata should be assigned different material parameters in computational models of the human brain. We provide a total of four parameter sets based on the two initial Poisson's ratios of 0.45 and 0.49 as well as the pre- and unconditioned experimental responses, respectively. Our results highlight the close interrelation between the Poisson's ratio and the remaining model parameters. The identified parameters will contribute to more precise computational models enabling spatially resolved predictions of the stress and strain states in human brains under complex mechanical loading conditions.

Quantifying the Effect of Sex and Neuroanatomical Biomechanical Features on Brain Deformation Response in Finite Element Brain Models

Recent automotive epidemiology studies have concluded that females have significantly higher odds of sustaining a moderate brain injury or concussion than males in a frontal crash after controlling for multiple crash and occupant variables. Differences in neuroanatomical features, such as intracranial volume (ICV), have been shown between male and female subjects, but how these sex-specific neuroanatomical differences affect brain deformation is unknown. This study used subject-specific finite element brain models, generated via registration-based morphing using both male and female magnetic resonance imaging scans, to investigate sex differences of a variety of neuroanatomical features and their effect on brain deformation; additionally, this study aimed to determine the relative importance of these neuroanatomical features and sex on brain deformation metrics for a single automotive loading environment. Based on the Bayesian linear mixed models, sex had a significant effect on ICV, white matter volume and gray matter volume, as well as a section of cortical gray matter regions' thicknesses and volumes; however, after these neuroanatomical features were accounted for in the statistical model, sex was not a significant factor in predicting brain deformation. ICV had the highest relative effect on the brain deformation metrics assessed. Therefore, ICV should be considered when investigating both brain injury biomechanics and injury risk.

Evaluation of cerebral cortex viscoelastic property estimation with nonlinear inversion magnetic resonance elastography

Objective. Magnetic resonance elastography (MRE) of the brain has shown promise as a sensitive neuroimaging biomarker for neurodegenerative disorders; however, the accuracy of performing MRE of the cerebral cortex warrants investigation due to the unique challenges of studying thinner and more complex geometries.Approach. A series of realistic, whole-brain simulation experiments are performed to examine the accuracy of MRE to measure the viscoelasticity (shear stiffness,μ, and damping ratio, ξ) of cortical structures predominantly effected in aging and neurodegeneration. Variations to MRE spatial resolution and the regularization of a nonlinear inversion (NLI) approach are examined.Main results. Higher-resolution MRE displacement data (1.25 mm isotropic resolution) and NLI with a low soft prior regularization weighting provided minimal measurement error compared to other studied protocols. With the optimized protocol, an average error inμand ξ was 3% and 11%, respectively, when compared with the known ground truth. Mid-line structures, as opposed to those on the cortical surface, generally display greater error. Varying model boundary conditions and reducing the thickness of the cortex by up to 0.67 mm (which is a realistic portrayal of neurodegenerative pathology) results in no loss in reconstruction accuracy.Significance. These experiments establish quantitative guidelines for the accuracy expected ofin vivoMRE of the cortex, with the proposed method providing valid MRE measures for future investigations into cortical viscoelasticity and relationships with health, cognition, and behavior.

Subject-Specific Head Model Generation by Mesh Morphing: A Personalization Framework and Its Applications

Finite element (FE) head models have become powerful tools in many fields within neuroscience, especially for studying the biomechanics of traumatic brain injury (TBI). Subject-specific head models accounting for geometric variations among subjects are needed for more reliable predictions. However, the generation of such models suitable for studying TBIs remains a significant challenge and has been a bottleneck hindering personalized simulations. This study presents a personalization framework for generating subject-specific models across the lifespan and for pathological brains with significant anatomical changes by morphing a baseline model. The framework consists of hierarchical multiple feature and multimodality imaging registrations, mesh morphing, and mesh grouping, which is shown to be efficient with a heterogeneous dataset including a newborn, 1-year-old (1Y), 2Y, adult, 92Y, and a hydrocephalus brain. The generated models of the six subjects show competitive personalization accuracy, demonstrating the capacity of the framework for generating subject-specific models with significant anatomical differences. The family of the generated head models allows studying age-dependent and groupwise brain injury mechanisms. The framework for efficient generation of subject-specific FE head models helps to facilitate personalized simulations in many fields of neuroscience.

Toward a Comprehensive Delineation of White Matter Tract-Related Deformation

Finite element (FE) models of the human head are valuable instruments to explore the mechanobiological pathway from external loading, localized brain response, and resultant injury risks. The injury predictability of these models depends on the use of effective criteria as injury predictors. The FE-derived normal deformation along white matter (WM) fiber tracts (i.e., tract-oriented strain) recently has been suggested as an appropriate predictor for axonal injury. However, the tract-oriented strain only represents a partial depiction of the WM fiber tract deformation. A comprehensive delineation of tract-related deformation may improve the injury predictability of the FE head model by delivering new tract-related criteria as injury predictors. Thus, the present study performed a theoretical strain analysis to comprehensively characterize the WM fiber tract deformation by relating the strain tensor of the WM element to its embedded fiber tract. Three new tract-related strains with exact analytical solutions were proposed, measuring the normal deformation perpendicular to the fiber tracts (i.e., tract-perpendicular strain), and shear deformation along and perpendicular to the fiber tracts (i.e., axial-shear strain and lateral-shear strain, respectively). The injury predictability of these three newly proposed strain peaks along with the previously used tract-oriented strain peak and maximum principal strain (MPS) were evaluated by simulating 151 impacts with known outcome (concussion or non-concussion). The results preliminarily showed that four tract-related strain peaks exhibited superior performance than MPS in discriminating concussion and non-concussion cases. This study presents a comprehensive quantification of WM tract-related deformation and advocates the use of orientation-dependent strains as criteria for injury prediction, which may ultimately contribute to an advanced mechanobiological understanding and enhanced computational predictability of brain injury.

MR Imaging of Human Brain Mechanics In Vivo: New Measurements to Facilitate the Development of Computational Models of Brain Injury

Computational models of the brain and its biomechanical response to skull accelerations are important tools for understanding and predicting traumatic brain injuries (TBIs). However, most models have been developed using experimental data collected on animal models and cadaveric specimens, both of which differ from the living human brain. Here we describe efforts to noninvasively measure the biomechanical response of the human brain with MRI-at non-injurious strain levels-and generate data that can be used to develop, calibrate, and evaluate computational brain biomechanics models. Specifically, this paper reports on a project supported by the National Institute of Neurological Disorders and Stroke to comprehensively image brain anatomy and geometry, mechanical properties, and brain deformations that arise from impulsive and harmonic skull loadings. The outcome of this work will be a publicly available dataset ( http://www.nitrc.org/projects/bbir ) that includes measurements on both males and females across an age range from adolescence to older adulthood. This article describes the rationale and approach for this study, the data available, and how these data may be used to develop new computational models and augment existing approaches; it will serve as a reference to researchers interested in using these data.

Toward subject-specific evaluation: methods of evaluating finite element brain models using experimental high-rate rotational brain motion

Computational models of the brain have become the gold standard in biomechanics to understand, predict, and mitigate traumatic brain injuries. Many models have been created and evaluated with limited experimental data and without accounting for subject-specific morphometry of the specimens in the dataset. Recent advancements in the measurement of brain motion using sonomicrometry allow for a comprehensive evaluation of brain model biofidelity using a high-rate, rotational brain motion dataset. In this study, four methods were used to determine the best technique to compare nodal displacement to experimental brain motion, including a new morphing method to match subject-specific inner skull geometry. Three finite element brain models were evaluated in this study: the isotropic GHBMC and SIMon models, as well as an anisotropic model with explicitly embedded axons (UVA-EAM). Using a weighted cross-correlation score (between 0 and 1), the anisotropic model yielded the highest average scores across specimens and loading conditions ranging from 0.53 to 0.63, followed by the isotropic GHBMC with average scores ranging from 0.46 to 0.58, and then the SIMon model with average scores ranging from 0.36 to 0.51. The choice of comparison method did not significantly affect the cross-correlation score, and differences of global strain up to 0.1 were found for the morphed geometry relative to baseline models. The morphed or scaled geometry is recommended when evaluating computational brain models to capture the subject-specific skull geometry of the experimental specimens.

Integrating material properties from magnetic resonance elastography into subject-specific computational models for the human brain

Advances in brain imaging and computational methods have facilitated the creation of subject-specific computational brain models that aid researchers in investigating brain trauma using simulated impacts. The emergence of magnetic resonance elastography (MRE) as a non-invasive mechanical neuroimaging tool has enabled in vivo estimation of material properties at low-strain, harmonic loading. An open question in the field has been how this data can be integrated into computational models. The goals of this study were to use a novel MRI dataset acquired in human volunteers to generate models with subject-specific anatomy and material properties, and then to compare simulated brain deformations to subject-specific brain deformation data under non-injurious loading. Models of five subjects were simulated with linear viscoelastic (LVE) material properties estimated directly from MRE data. Model predictions were compared to experimental brain deformation acquired in the same subjects using tagged MRI. Outcomes from the models matched the spatial distribution and magnitude of the measured peak strain components as well as the 95^th percentile in-plane peak strains within 0.005 mm/mm and maximum principal strain within 0.012 mm/mm. Sensitivity to material heterogeneity was also investigated. Simulated brain deformations from a model with homogenous brain properties and a model with brain properties discretized with up to ten regions were very similar (a mean absolute difference less than 0.0015 mm/mm in peak strains). Incorporating material properties directly from MRE into a biofidelic subject-specific model is an important step toward future investigations of higher-order model features and simulations under more severe loading conditions.